Search Results

Search found 25182 results on 1008 pages for 'ask me'.

Page 84/1008 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• how to use gps receiver bu-353 in ubuntu 10.10

  - by Parimal

  Hi I have a gps receiver bu-353 with usb interface i want to know how can i use it under ubuntu I ran the following command gpsd -n -N -D 2 /dev/ttyUSB0 i got the output as: gpsd: launching (Version 2.94) gpsd: listening on port gpsd gpsd: running with effective group ID 1000 gpsd: running with effective user ID 1000 gpsd: opening GPS data source type 3 at '/dev/ttyUSB0' gpsd: speed 38400, 8N1 gpsd: Garmin: garmin_gps Linux USB module not active. gpsd: speed 9600, 8O1 gpsd: speed 38400, 8N1 gpsd: gpsd_activate(): opened GPS (fd 6) gpsd: speed 4800, 8N1 gpsd: NTPD ntpd_link_activate: 0 gpsd: /dev/ttyUSB0 identified as type SiRF binary (2.687608 sec @ 4800bps) gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client after this i started tangoGPS, which said no gps and no gpsd found

  Read the article

• Intel graphics driver installer, now the CPU fan is rarely quiet

  - by Space monkey

  I have an Optimus chipset: Intel HD 4000 (i7-3635QM CPU) Geforce 640m I don't care about the NVIDIA card, so I didn't try to install any proprietary drivers for it. So: I was having a choppy+high CPU experience with gnome-shell on Ubuntu 14.04. Only happened when I tried moving a window around quickly. I used the Intel graphics installer hoping that it will fix the problem. It did fix the problem, now there is no choppyness or high CPU when I move windows around. However, there is a new problem now: The fan is rarely quiet, doing barely anything at all will cause the fan to go into loud mode quickly. That happens despite the CPU usage being at just around 4%. This wasn't the case before installing Intel drivers. It would normally only do that if, for example, I'm installing packages or doing something that puts some stress on the CPU. I set all CPU cores to "powersave" using cpufreq-set, but nothing changed. Also on Windows, the fans are really quiet when I'm in powersave mode. I believe they completely shut off for most of the time. I remember the installer giving me a report at the end as to which packages it installed. Unfortunately, I didn't save the report and I don't know where it would have saved it if it did. Any ideas or similar experiences?

  Read the article

• Cannot SSH to ubuntu server - openssh server owner changed

  - by Kshitiz Shankar

  I am using suPHP with Apache for virtual hosting but somewhere down the line my root ssh access is getting screwed up. I haven't been able to figure out why it is happening but eventually, my root user is not able to ssh to the server. I get this error: *** invalid open call: O_CREAT without mode ***: sshd: root@pts/3 terminated ======= Backtrace: ========= /lib/x86_64-linux-gnu/libc.so.6(__fortify_fail+0x37)[0x7f12fe871817] /lib/x86_64-linux-gnu/libc.so.6(+0xeb7e1)[0x7f12fe8527e1] sshd: root@pts/3[0x41a542] sshd: root@pts/3[0x41a9eb] sshd: root@pts/3[0x41aeb8] sshd: root@pts/3[0x409630] sshd: root@pts/3[0x40f9ed] sshd: root@pts/3[0x410dd6] sshd: root@pts/3[0x411994] sshd: root@pts/3[0x411f16] sshd: root@pts/3[0x40b253] sshd: root@pts/3[0x42be24] sshd: root@pts/3[0x40c9cb] sshd: root@pts/3[0x412199] sshd: root@pts/3[0x4061a2] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed)[0x7f12fe78876d] sshd: root@pts/3[0x407635] ======= Memory map: ======== 00400000-00448000 r-xp 00000000 ca:02 4554758 /usr/sbin/sshd 00647000-00648000 r--p 00047000 ca:02 4554758 /usr/sbin/sshd 00648000-00649000 rw-p 00048000 ca:02 4554758 /usr/sbin/sshd 00649000-00750000 rw-p 00000000 00:00 0 01794000-017b5000 rw-p 00000000 00:00 0 [heap] 7f12fd5ad000-7f12fd5c2000 r-xp 00000000 ca:02 3489844 /lib/x86_64-linux-gnu/libgcc_s.so.1 7f12fd5c2000-7f12fd7c1000 ---p 00015000 ca:02 3489844 /lib/x86_64-linux-gnu/libgcc_s.so.1 7f12fd7c1000-7f12fd7c2000 r--p 00014000 ca:02 3489844 /lib/x86_64-linux-gnu/libgcc_s.so.1 7f12fd7c2000-7f12fd7c3000 rw-p 00015000 ca:02 3489844 /lib/x86_64-linux-gnu/libgcc_s.so.1 7f12fd7c3000-7f12fd7db000 r-xp 00000000 ca:02 3489977 /lib/x86_64-linux-gnu/libresolv-2.15.so 7f12fd7db000-7f12fd9db000 ---p 00018000 ca:02 3489977 /lib/x86_64-linux-gnu/libresolv-2.15.so 7f12fd9db000-7f12fd9dc000 r--p 00018000 ca:02 3489977 /lib/x86_64-linux-gnu/libresolv-2.15.so 7f12fd9dc000-7f12fd9dd000 rw-p 00019000 ca:02 3489977 /lib/x86_64-linux-gnu/libresolv-2.15.so 7f12fd9dd000-7f12fd9df000 rw-p 00000000 00:00 0 7f12fd9df000-7f12fd9e6000 r-xp 00000000 ca:02 3489994 /lib/x86_64-linux-gnu/libnss_dns-2.15.so 7f12fd9e6000-7f12fdbe5000 ---p 00007000 ca:02 3489994 /lib/x86_64-linux-gnu/libnss_dns-2.15.so 7f12fdbe5000-7f12fdbe6000 r--p 00006000 ca:02 3489994 /lib/x86_64-linux-gnu/libnss_dns-2.15.so 7f12fdbe6000-7f12fdbe7000 rw-p 00007000 ca:02 3489994 /lib/x86_64-linux-gnu/libnss_dns-2.15.so 7f12fdbe7000-7f12fdd27000 rw-s 00000000 00:04 6167294 /dev/zero (deleted) 7f12fdd27000-7f12fdd33000 r-xp 00000000 ca:02 3489984 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7f12fdd33000-7f12fdf32000 ---p 0000c000 ca:02 3489984 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7f12fdf32000-7f12fdf33000 r--p 0000b000 ca:02 3489984 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7f12fdf33000-7f12fdf34000 rw-p 0000c000 ca:02 3489984 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7f12fdf34000-7f12fdf3e000 r-xp 00000000 ca:02 3489979 /lib/x86_64-linux-gnu/libnss_nis-2.15.so 7f12fdf3e000-7f12fe13e000 ---p 0000a000 ca:02 3489979 /lib/x86_64-linux-gnu/libnss_nis-2.15.so 7f12fe13e000-7f12fe13f000 r--p 0000a000 ca:02 3489979 /lib/x86_64-linux-gnu/libnss_nis-2.15.so 7f12fe13f000-7f12fe140000 rw-p 0000b000 ca:02 3489979 /lib/x86_64-linux-gnu/libnss_nis-2.15.so 7f12fe140000-7f12fe157000 r-xp 00000000 ca:02 3489996 /lib/x86_64-linux-gnu/libnsl-2.15.so 7f12fe157000-7f12fe356000 ---p 00017000 ca:02 3489996 /lib/x86_64-linux-gnu/libnsl-2.15.so 7f12fe356000-7f12fe357000 r--p 00016000 ca:02 3489996 /lib/x86_64-linux-gnu/libnsl-2.15.so 7f12fe357000-7f12fe358000 rw-p 00017000 ca:02 3489996 /lib/x86_64-linux-gnu/libnsl-2.15.so 7f12fe358000-7f12fe35a000 rw-p 00000000 00:00 0 7f12fe35a000-7f12fe362000 r-xp 00000000 ca:02 3489985 /lib/x86_64-linux-gnu/libnss_compat-2.15.so 7f12fe362000-7f12fe561000 ---p 00008000 ca:02 3489985 /lib/x86_64-linux-gnu/libnss_compat-2.15.so 7f12fe561000-7f12fe562000 r--p 00007000 ca:02 3489985 /lib/x86_64-linux-gnu/libnss_compat-2.15.so 7f12fe562000-7f12fe563000 rw-p 00008000 ca:02 3489985 /lib/x86_64-linux-gnu/libnss_compat-2.15.so 7f12fe563000-7f12fe565000 r-xp 00000000 ca:02 3489886 /lib/x86_64-linux-gnu/libdl-2.15.so 7f12fe565000-7f12fe765000 ---p 00002000 ca:02 3489886 /lib/x86_64-linux-gnu/libdl-2.15.so 7f12fe765000-7f12fe766000 r--p 00002000 ca:02 3489886 /lib/x86_64-linux-gnu/libdl-2.15.so 7f12fe766000-7f12fe767000 rw-p 00003000 ca:02 3489886 /lib/x86_64-linux-gnu/libdl-2.15.so 7f12fe767000-7f12fe91c000 r-xp 00000000 ca:02 3489888 /lib/x86_64-linux-gnu/libc-2.15.so 7f12fe91c000-7f12feb1b000 ---p 001b5000 ca:02 3489888 /lib/x86_64-linux-gnu/libc-2.15.so 7f12feb1b000-7f12feb1f000 r--p 001b4000 ca:02 3489888 /lib/x86_64-linux-gnu/libc-2.15.so 7f12feb1f000-7f12feb21000 rw-p 001b8000 ca:02 3489888 /lib/x86_64-linux-gnu/libc-2.15.so 7f12feb21000-7f12feb26000 rw-p 00000000 00:00 0 7f12feb26000-7f12feb2f000 r-xp 00000000 ca:02 3489983 /lib/x86_64-linux-gnu/libcrypt-2.15.so 7f12feb2f000-7f12fed2f000 ---p 00009000 ca:02 3489983 /lib/x86_64-linux-gnu/libcrypt-2.15.so 7f12fed2f000-7f12fed30000 r--p 00009000 ca:02 3489983 /lib/x86_64-linux-gnu/libcrypt-2.15.so 7f12fed30000-7f12fed31000 rw-p 0000a000 ca:02 3489983 /lib/x86_64-linux-gnu/libcrypt-2.15.so 7f12fed31000-7f12fed5f000 rw-p 00000000 00:00 0 7f12fed5f000-7f12fef10000 r-xp 00000000 ca:02 3489831 /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 7f12fef10000-7f12ff110000 ---p 001b1000 ca:02 3489831 /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 7f12ff110000-7f12ff12b000 r--p 001b1000 ca:02 3489831 /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 7f12ff12b000-7f12ff136000 rw-p 001cc000 ca:02 3489831 /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 7f12ff136000-7f12ff13a000 rw-p 00000000 00:00 0 7f12ff13a000-7f12ff150000 r-xp 00000000 ca:02 3490020 /lib/x86_64-linux-gnu/libz.so.1.2.3.4 7f12ff150000-7f12ff34f000 ---p 00016000 ca:02 3490020 /lib/x86_64-linux-gnu/libz.so.1.2.3.4 7f12ff34f000-7f12ff350000 r--p 00015000 ca:02 3490020 /lib/x86_64-linux-gnu/libz.so.1.2.3.4Connection to stageserver.dockphp.com closed. After some debugging, I was able to narrow it down to a few things. For some reason the sshd daemon is running as root:www-data (apache user) instead of root. My ftp connection works but ssh over terminal fails. I have no idea whether it is getting caused due to suPHP or not (because that is the only place where user permission's etc. change). I really need to narrow it down and fix it asap. Thanks a lot!

  Read the article

• Can I do filename pattern matching in a bash script?

  - by Bob Bowden

  Can I do filename pattern matching in a bash script? "test" is a directory with the following files ... bob@bob-laptop:~/test$ ls exclude exclude1 exclude2 include1 include2 from the command line, if I want to exclude some of the files, I can do ... bob@bob-laptop:~/test$ echo !(exclude*) include1 include2 but, if I put that command in a script (named exclude) ... bob@bob-laptop:~/test$ cat exclude echo !(exclude*) when I execute it, I get an error ... bob@bob-laptop:~/test$ ./exclude ./exclude: line 1: syntax error near unexpected token (' ./exclude: line 1:echo !(exclude*)' I've tried every (I think) variation of escaping some, all or none of the special characters and I still get an error. What am I missing here? If I can't do this, would someone please be so kind as to explain why?

  Read the article

• How to solve "GPU Lockup - switching to software fbcon" on new install of 12.10-desktop-amd64

  - by Curtis

  Error occurs during startup of Ubuntu Installation. Sometimes I'll get to the Welcome screen just like this, the screen will just glitch out, or will simply freeze during the loading icon. nvidia GTS 250 Intel Core i7 920 9 GB Memory I was able to install 12.04.1, but after performing upgrade to 12.10 it get the same problem on startup; glitches in graphics, missing content etc. Also noticed after the upgrade, I'm no longer able to connect to internet; neither ethernet or wifi.

  Read the article

• Log & monitor mysql databases on servers

  - by user3215

  How MySQL databases logged and monitored on ubuntu servers in real time?. I checked /var/log/mysql.log and found it empty. EDIT 1: The log was not enabled in the mysql configuration file. Now it logs and I could see the logs in the file /var/log/mysql/mysql.log But this could not be sufficient to gather additional information about the database logs. Is there any other way or any popular open source tool?

  Read the article

• Can't login, kde loads, then back to kdm

  - by Daniel

  Hi @all (K)Ubuntu users, I installed Kubuntu 10.10 after it's realesing. (ordinary I use Ubuntu, but this time I want to try Kubuntu, too) Now I can't login in Kubuntu: When(/if) I login with mine username and password, KDE loads(I mean this splashscreen), but if it's ready nearly, the screen becomes dark and I'm back in the login-manager. I tried many things: With a new user or with installing gdm or install it new (two times!) Thank you for helping PS: Ubuntu works normal Sorry for my bad english ;-) EDIT: The text-console-mode(or however it's named in english) isn't working anytimes, seemes like a graphics bug or something similiar. And there aren't very many (hidden) ".folders", just .kde .config .dbus .fontconfig and some ".files".

  Read the article

• Help! Online upgrade from 12.04 to 14.04 stuck

  - by Luis

  I was trying to upgrade my Lenovo T500 laptop from Kubuntu 12.04 LTS to Kubuntu 14.04 LTS. Fired up the upgrade process, and finally after downloading a zillion packages the upgrade got going, only to get stuck... It has been stuck for hours on: Installing the upgrades->Unpacking subversion Last lines of error messages: GLib-GObject-CRITICAL **: /build/buildd/glib2.0-2.32.4/./gobject/gtype.c:2722: You forgot to call g_type_init() at /usr/lib/perl/5.18/DynaLoader.pm line 207. GLib-CRITICAL **: g_once_init_leave: assertion `result != 0' failed at /usr/lib/perl/5.18/DynaLoader.pm line 207. I don't care much about subversion anymore, I use git now; I don't care if subversion ends up in a bad state and I have to remove it... I just want the upgrade to continue, and hopefully complete. Any ideas???? Thanks, Luis

  Read the article

• Difference between programs in Software Centre and Launchpad PPA

  - by Lionthinker

  On several Ubuntu sites such as OMG Ubuntu there are summaries of new ppa's. These are useful programs, but they don't appear in the Software Center. However, in the center there are programs that specifically say are "community supported" and not Canonical supported. So what is the difference between Software Center programs and PPA's? It would be a lot more useful if more PPAs were in the center.

  Read the article

• Invisible mouse cursor

  - by Rob

  There have been some similar posts but nothing specific to me. Sometimes i boot my laptop and all is well. Other times I boot up and after the login screen my mouse cursor disappears, I can still use it, its just invisible. I start up fire fox and the cursor is visible but only on the application window.... My sysetem is: samsung R60 Plus, with 4gb ram and a T7500, using the ati Xpress 1250 graphics. This is with Ubuntu 11.10. Does any one know of a work around? Many thanks Rob,

  Read the article

• Fixing /etc/shadow with md5 passwords to sha512 passwords

  - by dr jimbob

  I recently upgraded an ubuntu server with many users to a recent version from a version from 2008. The server used to use md5 password hashes (e.g., the shadow passwords began with $1$) and now is configured to use sha512. I'd prefer to keep using sha512, but would like the old users to be able to partially login once with their old password and then be forced to update their password (even if its the same password) generating a sha512. Right now, the old md5-based passwords in /etc/shadow won't let the user login at all (and just appear to be incorrect passwords). This seems like plenty of people should have had to do this before; yet I can't see how to do it, looking in the common places like /etc/pam.d/common-password nad /etc/login.defs. Also users will be logging in via ssh; and I do not have everyone's contact info (email or otherwise); and some login fairly rarely. Any help? (Googling doesn't seem to give any good solutions).

  Read the article

• What blogging clients are available?

  - by jokerdino

  I regularly blog on both Wordpress and Blogger platform and as such, desktop clients are far more convenient than browser based clients. When I used Windows, I was using a desktop blogging client called Windows Live Writer. Are there any Ubuntu alternatives for blogging clients available? Features expected: Multiple blog support Post drafts to the blog Save drafts locally Add tags / categories Upload media

  Read the article

• Why does integrity check fail for the 12.04.1 Alternate ISO?

  - by mghg

  I have followed various recommendations from the Ubuntu Documentation to create a bootable Ubuntu USB flash drive using the 12.04.1 Alternate install ISO-file for 64-bit PC. But the integrity test of the USB stick has failed and I do not see why. These are the steps I have made: Download of the 12.04.1 Alternate install ISO-file for 64-bit PC (ubuntu-12.04.1-alternate-amd64.iso) from http://releases.ubuntu.com/12.04.1/, as well as the MD5, SHA-1 and SHA-256 hash files and related PGP signatures Verification of the data integrity of the ISO-file using the MD5, SHA-1 and SHA-256 hash files, after having verified the hash files using the related PGP signature files (see e.g. https://help.ubuntu.com/community/HowToSHA256SUM and https://help.ubuntu.com/community/VerifyIsoHowto) Creation of a bootable USB stick using Ubuntu's Startup Disk Creator program (see http://www.ubuntu.com/download/help/create-a-usb-stick-on-ubuntu) Boot of my computer using the newly made 12.04.1 Alternate install on USB stick Selection of the option "Check disc for defects" (see https://help.ubuntu.com/community/Installation/CDIntegrityCheck) Steps 1, 2, 3 and 4 went without any problem or error messages. However, step 5 ended with an error message entitled "Integrity test failed" and with the following content: The ./install/netboot/ubuntu-installer/amd64/pxelinux.cfg/default file failed the MD5 checksum verification. Your CD-ROM or this file may have been corrupted. I have experienced the same (might only be similar since I have no exact notes) error message in previous attempts using the 12.04 (i.e. not the maintenance release) Alternate install ISO-file. I have in these cases tried to install anyway and have so far not experienced any problems to my knowledge. Is failed integrity check described above a serious error? What is the solution? Or can it be ignored without further problems?

  Read the article

• Is it possible to get dragging work on a Macbook multi-touch touch pad

  - by lhahne

  I have a Macbook 5,1. That is to say that it is the only 13 inch aluminium Macbook as the later revisions were renamed Macbook Pro. Two-finger scrolling seems to work fine but dragging doesn't work. In OsX this works so that you point an object, click and keep your finger pressed on the touch pad while slide another finger to move the cursor. This causes weird and undefined behavior in Ubuntu as it seems the driver doesn't recognize this as dragging. Any ideas?

  Read the article

• Slow wifi on Ubuntu 12.04 wifi driver ath9k

  - by lunar

  For the last couple of days my wifi connection is extremely slow. I am pretty sure that it is caused by the driver. Can this be improved? lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"MyWiFi" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:68:FE:7B:C7 Bit Rate=58.5 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:6960 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 74:f0:6d:34:c2:4e width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d7400000-d740ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:4b:38:78:f6:ae capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128) lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd Bus 001 Device 004: ID 0b05:1788 ASUSTek Computer, Inc. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 425M] (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB controller: Fresco Logic Device 1400 (rev 01) 06:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) rfkill list all 0: hci0: Bluetooth Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Windows 7 restarts PC when selected from GRUB Menu

  - by Dan Still

  I installed windows 7 on a RAID 5 (2@160GB SATA +1@160GB SATA for RAID 5) I then proceeded to install Ubuntu 11.10 using the Live CD and opted: "Install along side Windows 7 Option" Upon boot GRUB appears normally and I can select and run Ubuntu with no difficulties. When I select Windows 7 from GRUB the PC restarts and consequently goes back to GRUB. I have attempted to use the Windows 7 DVD to repair the installation but to no avail. The Wizard ran twice as it described it might, after the second attempt came back with an '...inability to repair...' error. I am sure there is an answer to this somewhere but I have yet to be able to find it. (2 weeks and countless attempts and searches before posting this question. Although I am happy to use Ubuntu alone my wife likes to watch Netflix and therein requires the Windows 7 installation. Any answers are appreciated and welcomed. Thanks in advance. Dan Still

  Read the article

• UEFI/GPT Win 7 Load Failure in Dual Boot and no GRUB2 [Ubuntu 12.04]

  - by cristian_jordache

  Configuration: MBB: ASRock X79 Extreme6 Win 7 installed on a INTEL 40GB SSD (GPT partitioned) Ubuntu 14.04 on a CORSAIR 30GB SSD (Ext4 and SWAP) I had Windows 7 installed previously in UEFI mode, using 3 partitions (GPT) and works fine if left alone. In UEFI BIOS settings I can see sometimes a "Windows Boot Manager" and other times (?) a "UEFI Intel" entry for INTEL HDD and Windows will boot properly selecting the one available at that time. I installed Ubuntu 14.04 after Win 7 w/o changing any UEFI BIOS settings and it works fine only if the BIOS is set w/ the Ubuntu partition as the first drive to boot, in AHCI mode. If both SSD drives are connected, the Win7 Intel boot drive can be chosen as first boot device but only as an "AHCI Intel drive" (No "Windows Boot Manager" nor "UEFI Intel device" options available in BIOS Boot menu) and Win7 will not load properly as long as the Ubuntu Crucial SSD is NOT PHYSICALLY DISCONNECTED. Windows will try, start booting for few seconds but will fail replacing Win7 logo and that startup animation with w/ the "old" white progress bar and then and will notify that there is a issue and prompt the user to try to Load Win 7 in Normal Mode again or try a Recovery Mode to fix it. If I let Windows INTEL HDD boot via BIOS/UEFI - Windows Boot manager selection, I may see the purple screen of Grub2 loaded for a while, but there's no selection for Ubuntu or Windows and/or then machine is not booting, showing a black screen and a small command prompt cursor blinking on top. So far the only option I see to have Ubuntu boot side by side w/ Win 7 is to reformat the Win7 SDD and set it boot in legacy BIOS mode with a MBR instead of GPT. Per my understanding this is a quite complex issue to fix (Rod Smith's answer was pretty helpful: UEFI boot on my Asus k52f) but any other suggestions are welcome. I find a bit odd that I can boot properly Windows7 SSD or an Ubuntu DVD using a DVD drive set in UEFI-BIOS in "AHCI mode" and w/ using "UEFI/Windows Boot Manager" booting option but I cannot boot a secondary SSD-HDD w/ Ubuntu having the same BIOS/UEFI Boot configuration. Looks like plugging the second SSD [the Ubuntu partition] is interfering with boot options in UEFI-BIOS.

  Read the article

• Where are gnome keyboard shortcuts stored

  - by Evan Plaice

  I usually load a new version for every release to keep my OS fresh while preserving the last version on another partition as backup. I also employ a lot of custom key mappings (IMHO, the defaults suck). I've figured out how to transfer the majority of my configuration across systems so far but I can't figure out where the custom keyboard shortcut mappings are stored. Does anybody know where gnome puts these? Are there separate user config (Ie. ~/) and system config (Ie. /etc) files?

  Read the article

• Install ubuntu-11.10-desktop-amd64 with Logitech diNovo Edge

  - by MyGGaN

  I know there are problems (and have been for quite some time) with the diNovo Edge keyboard. The solution could be found easily and often you can use the on-screen keyboard to fix it. Now I'm installing Ubuntu from scratch and the only keyboard I have is my diNovo, am I screwed? You are able to get to System Config during the install process and from there to Accessibility menu where you usually can start the on-screen keyboard. This doesn't work, no keyboard in sight... What if I can do some ninja copy-paste with the mouse?? Nope, no pasting allowed in the feilds: username, password, etc. Is there a chance I can fix this somehow within the .iso file before I create the bootable USB drive I use to install from? Or do I have to buy a keyboard to be able to install Ubuntu?

  Read the article

• Google Chrome freezes for seconds

  - by Levan

  I do not know if this is the right place to write about google chrome or not so sorry if it is not after the update ,,Google Chrome 20.0.1132.47" google chrome started to lag ,,It gets stuck for couple of seconds and then it resumes" i think it starts lagging when i enter any flash site when i started chrome from the terminal it showed this before the update non of this appeared ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_direct.c:980:(snd1_pcm_direct_initialize_slave) unable to install hw params ALSA lib pcm_dsnoop.c:623:(snd_pcm_dsnoop_open) unable to initialize slave ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_direct.c:980:(snd1_pcm_direct_initialize_slave) unable to install hw params ALSA lib pcm_dsnoop.c:623:(snd_pcm_dsnoop_open) unable to initialize slave ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_direct.c:980:(snd1_pcm_direct_initialize_slave) unable to install hw params ALSA lib pcm_dsnoop.c:623:(snd_pcm_dsnoop_open) unable to initialize slave ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_direct.c:980:(snd1_pcm_direct_initialize_slave) unable to install hw params ALSA lib pcm_dsnoop.c:623:(snd_pcm_dsnoop_open) unable to initialize slave ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_direct.c:980:(snd1_pcm_direct_initialize_slave) unable to install hw params ALSA lib pcm_dsnoop.c:623:(snd_pcm_dsnoop_open) unable to initialize slave ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_direct.c:980:(snd1_pcm_direct_initialize_slave) unable to install hw params ALSA lib pcm_dsnoop.c:623:(snd_pcm_dsnoop_open) unable to initialize slave Firefox does not have any problem is there a way to fix this and thank you for your time

  Read the article

• Booting the liveCD/USB in efi mode fails on tablet xe700t1a

  - by F.L.

  My tablet is Samsung Series 7 Slate (xe700t1a-a02fr). It operates an intel sandy bridge architecture. The main issue about this tablet is that it ships with a windows 7 install in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. I have used the 12.04.1 desktop iso (I have read somewhere that it is the only one that can boot in EFI mode). What are the other leads I can follow ? thanks

  Read the article

• dpkg: error: parsing file '/var/lib/dpkg/status' near line 6449

  - by mpole

  Good evening. This problem occured when trying to update using the update manager. A problem occured so I cleared all the cache and tried to update once again this time in terminal, and it spat out: dpkg: error: parsing file '/var/lib/dpkg/status' near line 6449 missing package name After opening up 'status' with gedit and going to line 6449, I found that nothing was on that line but the following was before and after it. This package contains the Mono System.Configuration library for CLI 4.0. Original-Maintainer: Debian Mono Group <[email protected])oth.debian.org> Homepage: http://www.mono-project.com/ <<<<---- LINE 6449 Package: bzip2 Status: install ok installed Priority: optional Section: utils Installed-Size: 160 Maintainer: Ubuntu Developers <[email protected]> <<<<--- LINE 6449 is obviously not on the file, but I can't see whats wrong here? anybody have an idea? Thanks! Edit: I have tried running: sudo apt-get install --fix-missing sudo dpkg --clear-avail But no good...

  Read the article

• How do I remove lubuntu-desktop?

  - by Alvar

  I wanted to try lubuntu-desktop so I installed it with sudo apt-get install lubuntu-desktop. But when I didn't like it I wanted to remove it with sudo apt-get remove lubuntu-desktop(then with auto-remove) but my startup / shutdown screen does still say lubuntu. So how do I remove lubuntu-desktop? Atempt one: sudo apt-get remove lubuntu-desktop lubuntu-artwork playmouth-theme-lubuntu-logo playmouth-theme-lubuntu-text I was unable to locate any of those packages. I've also tried to remove and install ubuntu-desktop, but none has worked.

  Read the article

• KMenu & shell script

  - by allenskd

  I'm trying to make a very small shell script with a simple command and add it up to the KMenu. Well, thing is that once it launches the shell script, it closes it fast and I want to leave it open because the shell script attempts to create run a web application using a framework. I tried with this first #!/bin/bash play run /home/david/Projects/ZS then I tried with this #!/bin/bash konsole -e play run /home/david/Projects/ZSBlackboard In terminal, it runs perfectly, but in launcher.. not so much Any solution or suggestion is appreciated, thanks

  Read the article

• How do I install Flash Player 11 debug version in 11.10?

  - by shanethehat

  I want to replace my existing browser plugin Flash Player with the debug version, and update to FP11 while I'm at it. I also want to install the debug version of the projector player and make it the default player for SWF files outside of the browser. First the browser plugin version. I've downloaded the installer from the official site, but I'm not sure what to do with the contents. There is a usr folder, and I presume that I am to write the contents of this to /usr. There is also a file called libflashplayer.so, and I have no idea what to do with that. For download for the projector player has confused me further because it only contains one file: flashplayerdebugger. I don't know what to do with this. If there is a way to install these softwares through apt-get or the Software Center I would love to hear about it, I have only found solutions for the standard player, but otherwise could someone please tell me what to do with these files? Update Ok, so I've figured out that if I dump the flashplayerdebugger file into /usr/lib/ I can point Eclipse at it and compile and test SWFs as expected from inside Eclipse. But how can I set that application as the default player when I select an SWF in Nautilus?

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >