Search Results

Search found 13676 results on 548 pages for 'box shadow'.

Page 84/548 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • How do I set up XDMCP access via GDM?

    - by np_hard
    I am a newbie to ubuntu linux, and want to setup xdmcp access, so i can access it from my windows box using xming. part of it is learning exercise also, since i know i could use vnc to directly connect to ubuntu. I modified the gdm's custom.conf file like this [xdmcp] Enable=true but when i launch xlaunch, i see a blank screen, further diagnosing with wireshark, i got that the udp port 177 on the linux box is unreachable so i disabled the firewall on linux box, but still same result. I checked with nmap and there is no service listening on UDP 177 port, the gdnsetup on natty is quite different from the older version, where setting up xdmcp was in UI

    Read the article

  • How do I start Nautilus as root?

    - by Pho swan
    I got problem with nautilus in Ubuntu 12.04 LTS when i run command "gksu nautilus /" password ask box appear and I type my super-user password , than password box is disappear and nautilus is not open. . when i try to open nautilus via normal user in command box . "nautilus" the folder is open up. when i try in terminal ... $sudo nautilus I got following error $ sudo nautilus / ** (nautilus:8523): WARNING **: Command line `dbus-launch --autolaunch=2c8ce9b7da2257c2609b749700000007 --binary-syntax --close-stderr' exited with non-zero exit status 1: Autolaunch error: X11 initialization failed.\n Could not parse arguments: Cannot open display: how can i fix this error..

    Read the article

  • Using photoshop actions to decide if an image needs to be rotated

    - by voxobscuro
    I have Photoshop CS3 and I need to do a batch on a lot of pictures before I upload them. The pictures need to fit in an 600x800 box, yet be as big as possible within that box. Some of them are much wider than taller and others are more tall than wide. I am trying to put together a photoshop action that will rotate, resize, and fill pictures as needed to make them as big as possible while staying within the 600x800 box. The only thing I haven't gotten sorted out is how to tell photoshop to rotate the image 90 degrees if that will allow the picture to be bigger within the constraints. Any ideas?

    Read the article

  • Creating widgets using GtkBuilder

    - by user72943
    I am using Glade to design a Box with widgets and then load these widgets into my UI at run-time. To create each Box with widgets at run-time, I create a new GtkBuilder, call add_from_string passing in the text from the .ui file Glade creates, and then use the object returned from get_object("box1") in the UI. I know I could create the widgets with code, but for now, I'd like to use the .ui files Glade creates. It seems inefficient though to instantiate a new GtkBuilder object and the wasted Window object for every Box I want to create. Is there a more efficient method to load .ui files without creating a new GtkWidget object and wasted Window object? Thanks, Vance

    Read the article

  • php application deployment to redhat [closed]

    - by Subhash Dike
    I am a .net background person with most of the work with Windows environment and IIS etc. I have been given a task to deploy one php application on RedHat Linux box. All I have is the credentials and the server IP of that box. Can someone help about how to get started creating a new website on Apache 2.0 on redhat box and then putting php code over to that. I do not have physical access to that server as well. I know it's very basis question, but I am in dark for these things. Even if you can point me to some documentation that's fine or else at least the analogy with IIS should also help to certain extent.

    Read the article

  • How best to take a users signature online? (UK law orientated) [closed]

    - by Ben Griffiths
    Not sure if this is the best place to ask, but I can't seem to find any of the other SE sites that would fit better (unless there's a law one?) I'm building an application that will replace an existing paper based form, and this form would normally be signed by the person filling it in. Looking around, it's hard to find a good definitive resource to explain what I can and cannot accept as far as a signature goes. It looks like some UK government online forms accept just your name typed into a box, but I've also heard you should back up with an email - so that process would be type name into a box along with providing an email address, send out an email, then make them click a link within the email to finally complete the verification. Involving email seems very long winded and leaves the system open to spam filters blocking emails, forgotten emails that just sit in inbox's etc. So, does anyone have any knowledge in this department? Personally, I'd love to just get them to type their name into a box and be done with it!

    Read the article

  • How to automatically mount a Windows shared folder on every boot up?

    - by Zabba
    I am able to access Windows' shared folder from Ubuntu 10.10 Nautilus like so: Type into the Location Bar : smb://box/projects Now, I can see the folder in Nautilus, create/read files in it. Also, on desktop I get a folder called "projects on box". But, that folder on the desktop goes away when I reboot. So, I thought that I can automount the Windows' shared projects folder by adding this to my fstab: //box/Projects /home/base/Projects smbfs rw,user,username=jack,password=www222,fmask=666,dmask=777 0 0 (base is my user name on Ubuntu) Now, I get a folder called "Projects" in my home folder after boot up, but it is empty (cannot see the same files that I can see in Nautilus). What's am I doing wrong? Some more detail: This is what I see of the Projects folder when I do ls -l in my home folder: ... drwxr-xr-x 2 root root 4096 2011-01-01 10:22 Projects drwxr-xr-x 2 base base 4096 2011-01-01 09:06 Public ... Note the two "roots". Is that somehow the problem?

    Read the article

  • How can I have my VPN connect automatically when the wireless connects?

    - by ams
    I have a working VPN connection using NetworkManager, OpenConnect, and the network-manager-openconnect-gnome package, but I have to start it manually every time I connect to a network, and I have to enter my password manually each time. How can I get it to connect automatically, and remember my password (securely)? I have checked the 'Connect Automatically' box on the Configure VPN page, but this seems to have no effect. I've also got the 'Start connecting automatically' box checked in the pop-up box, and that does avoid the need to press the connect button in that window, but seems to have no part in kicking off the whole process in the first place. There is no option to remember the password in the window, but maybe there's one somewhere else?

    Read the article

  • 12.04 LTS won't install from CD

    - by Rob Hays
    I've been trying to install 12.04 LTS onto a Dell with a PIII from CD. Booting from the CD the install gets through the "Who are you" process, begins copying files. The progress bar gets as far as the last period in "Copying files...". The box clears, and an error box comes up "The installer has encountered an unrecoverable error. A desktop session will now be run so that you may investigae the problem or try installing again." When I try to install from this desktop session, the install gets to the same point, the copying files box closes, and then just stops. The pointer is busy, the cd drive spins up occaisonally with no data transfer, no hard drive activity. When I boot from the CD and access the disk boot menu, the disk checks good, memory checks good ( I upgraded the original memory to 512 mb). I also updated the bios to the newest from Dell. This is an older L866r, but should meet the requirements.

    Read the article

  • Encryption password

    - by George
    I am running Ubuntu 12.04 LTS I thought that everything in my Documents folder was being backed up by Ubuntu1, as everytime I put a file in my documents folder a box popped up stating backing up file. When I looked at the Left hand list of programmes on my desktop screen there was an extra Box in the list. Clicked the Box and it stated encryption Password required. It seems the latest files have not been backed up as an Encryption Password is required. Can anyone explain for me, what is this Encription Password and how do I get it.

    Read the article

  • Tetris : Effective rotation

    - by hqt
    I rotate each piece by rotation formula. More detail, because rotation angle is 90 so : xNew = y; yNew = -x; But my method has met two problems : 1) Out of box : each type of pieces is fit in square 4x4. (0,0 at under left) But by this rotation, at some case they will out of this box. For example, there is a point with coordinate (5,6) So, please help me how to fit these coordinate into 4x4 box again, or give me another formula for this. 2) at I case : (4 squares at same row or same column), just has two rotations case. but in method above, they still has 4 pieces. So, how to prevent this. Thanks :)

    Read the article

  • Deactivated wifi drivers, now they won't activate again on a Dell Mini 10v?

    - by UbuntuFan
    I have ubuntu 13.04. In the software and update menu, under additional drivers, Were it says "Broadcom Corporation; BCM4312 802.11b/gLP.PHY" the box labbeled "do not use it ticked" and when i try tick the one that says "Using Broadcom 802.11 Linux STA Wireless drivers....." it wont let me apply changes, it starts doing it then stops and re-ticks the do not use box. Because of this I can not use the wiress driver. Is there another way i can fix this. Or maby restore ubuntu to previous date. I accidentally ticked the do not use box this morning and now can't undo it. I have restarted several times to try apply changes and still no luck

    Read the article

  • Deactivated wifi drivers, now they wont activate again?

    - by UbuntuFan
    I have ubuntu 13.04. In the software and update menu, under additional drivers, Were it says "Broadcom Corporation; BCM4312 802.11b/gLP.PHY" the box labbeled "do not use it ticked" and when i try tick the one that says "Using Broadcom 802.11 Linux STA Wireless drivers....." it wont let me apply changes, it starts doing it then stops and re-ticks the do not use box. Because of this I can not use the wiress driver. Is there another way i can fix this. Or maby restore ubuntu to previous date. I accidentally ticked the do not use box this morning and now can't undo it. I have restarted several times to try apply changes and still no luck

    Read the article

  • Screen Resolution Problem with Ubuntu 14.04 and VirtualBox

    - by user3341257
    Environment: Lenovo T530 running Windows 7. Have installed Ubuntu 14.04 on a virtual machine using VM Virtual Box. Have installed all the updates from both Virtual Box and Ubuntu. Problem: While in Ubuntu's desktop and other Ubuntu initiated programs, the window is reduced to about 3x4 inches showing in the middle of the rest of my regular Virtual Box window. I am seeing only the upper right hand of the screen output of what I would normally see. Please help. I've seen How do I install Guest Additions in a VirtualBox VM? But, none of these answers works in 14.04.

    Read the article

  • iPhone OpenGL ES freezes for no reason

    - by KJ
    Hi, I'm quite new to iPhone OpenGL ES, and I'm really stuck. I was trying to implement shadow mapping on iPhone, and I allocated two 512*1024*32bit textures for the shadow map and the diffuse map respectively. The problem is that my application started to freeze and reboot the device after I added the shadow map allocation part to the code (so I guess the shadow map allocation is causing all this mess). It happens randomly, but mostly within 10 minutes. (sometimes within a few secs) And it only happens on the real iPhone device, not on the virtual device. I backtracked the problem by removing irrelevant code lines by lines and now my code is really simple, but it's still crashing (I mean, freezing). Could anybody please download my xcode project linked below and see what on earth is wrong? The code is really simple: http://www.tempfiles.net/download/201004/95922/CrashTest.html I would really appreciate if someone can help me. My iPhone is a 3GS and running on the OS version 3.1. Again, run the code and it'll take about 5 mins in average for the device to freeze and reboot. (Don't worry, it does no harm) It'll just display cyan screen before it freezes, but you'll be able to notice when it happens because the device will reboot soon, so please be patient. Just in case you can't reproduce the problem, please let me know. (That could possibly mean it's specifically my device that something's wrong with) Observation: The problem goes away when I change the size of the shadow map to 512*512. (but with the diffuse map still 512*1024) I'm desperate for help, thanks in advance! Just for the people's information who can't download the link, here is the OpenGL code: #import "GLView.h" #import <OpenGLES/ES2/glext.h> #import <QuartzCore/QuartzCore.h> @implementation GLView + (Class)layerClass { return [CAEAGLLayer class]; } - (id)initWithCoder: (NSCoder*)coder { if ((self = [super initWithCoder:coder])) { CAEAGLLayer* layer = (CAEAGLLayer*)self.layer; layer.opaque = YES; layer.drawableProperties = [NSDictionary dictionaryWithObjectsAndKeys: [NSNumber numberWithBool: NO], kEAGLDrawablePropertyRetainedBacking, kEAGLColorFormatRGBA8, kEAGLDrawablePropertyColorFormat, nil]; displayLink_ = nil; context_ = [[EAGLContext alloc] initWithAPI: kEAGLRenderingAPIOpenGLES2]; if (!context_ || ![EAGLContext setCurrentContext: context_]) { [self release]; return nil; } glGenFramebuffers(1, &framebuffer_); glBindFramebuffer(GL_FRAMEBUFFER, framebuffer_); glViewport(0, 0, self.bounds.size.width, self.bounds.size.height); glGenRenderbuffers(1, &defaultColorBuffer_); glBindRenderbuffer(GL_RENDERBUFFER, defaultColorBuffer_); [context_ renderbufferStorage: GL_RENDERBUFFER fromDrawable: layer]; glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_RENDERBUFFER, defaultColorBuffer_); glGenTextures(1, &shadowColorBuffer_); glActiveTexture(GL_TEXTURE1); glBindTexture(GL_TEXTURE_2D, shadowColorBuffer_); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, 512, 1024, 0, GL_RGBA, GL_UNSIGNED_BYTE, NULL); glGenTextures(1, &texture_); glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D, texture_); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, 512, 1024, 0, GL_RGBA, GL_UNSIGNED_BYTE, NULL); } return self; } - (void)startAnimation { displayLink_ = [CADisplayLink displayLinkWithTarget: self selector: @selector(drawView:)]; [displayLink_ setFrameInterval: 1]; [displayLink_ addToRunLoop: [NSRunLoop currentRunLoop] forMode:NSDefaultRunLoopMode]; } - (void)useDefaultBuffers { glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_RENDERBUFFER, defaultColorBuffer_); glClearColor(0.0, 0.8, 0.8, 1); glClear(GL_COLOR_BUFFER_BIT); } - (void)useShadowBuffers { glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_TEXTURE_2D, shadowColorBuffer_, 0); glClearColor(0, 0, 0, 0); glClear(GL_COLOR_BUFFER_BIT); } - (void)drawView: (id)sender { NSTimeInterval startTime = [NSDate timeIntervalSinceReferenceDate]; [EAGLContext setCurrentContext: context_]; [self useShadowBuffers]; [self useDefaultBuffers]; glBindRenderbuffer(GL_RENDERBUFFER, defaultColorBuffer_); [context_ presentRenderbuffer: GL_RENDERBUFFER]; NSTimeInterval endTime = [NSDate timeIntervalSinceReferenceDate]; NSLog(@"FPS : %.1f", 1 / (endTime - startTime)); } - (void)stopAnimation { [displayLink_ invalidate]; displayLink_ = nil; } - (void)dealloc { if (framebuffer_) glDeleteFramebuffers(1, &framebuffer_); if (defaultColorBuffer_) glDeleteRenderbuffers(1, &defaultColorBuffer_); if (shadowColorBuffer_) glDeleteTextures(1, &shadowColorBuffer_); glDeleteTextures(1, &texture_); if ([EAGLContext currentContext] == context_) [EAGLContext setCurrentContext: nil]; [context_ release]; context_ = nil; [super dealloc]; } @end

    Read the article

  • Convert YouTube Videos to MP3 with YouTube Downloader

    - by DigitalGeekery
    Are you looking for a way to take the music videos you watch on YouTube and convert them to MP3? Today we take a look at an easy way to convert those YouTube videos to MP3 for free with YouTube Downloader. The YouTube Downloader functions in two steps. First, it downloads the video from YouTube in MP4 format, and then allows you to convert that MP4 file to MP3. Note: It also supports conversion conversion to some other formats such as AVI video, MOV, iPhone, PSP, 3GP, and WMV.   Installation and usage Download and Install YouTube Downloader. (See download link below) Open the YouTube Downloader by clicking on the desktop icon. Find a YouTube video you’d like to convert to MP3 and copy the URL. Paste the URL into the “Enter video URL” text box in YouTube Downloader. When you hover your mouse over the text box, the text box will auto-fill with the URL from your clipboard. Select the “Download video from YouTube” radio button and click “Ok.” Choose a folder to location to download your YouTube video and click “Save.” The video is downloaded in MP4 format. Now wait while the video is downloaded to your hard drive.   Select the “Convert video (previously downloaded) from file” radio button. Click the (…) button to the right of the “Select video file” text box to browse for and select the MP4 file you just downloaded. Then select “MPEG Audio Layer (MP3) from the “Convert to” drop down list. Select “OK” to begin the conversion. Choose the conversion quality by moving the slider to the right or left. The options are: Low (96kbps bite rate), Medium (128kbps bit rate), Optimal (192kbps bit rate), and High 256kbps bit rate). Here you can select the output volume as well. Click “OK” when finished. If there is a portion of the beginning or end of the video that you wish to cut out of the MP3, select the “Cut video” check box and choose a Start and End time. Click “OK” when finished. Note: The start and end time represent the audio portion of the MP3 you wish to keep. All portions before and after these times will be cut.   The conversion process will begin and should only take a few moments. Times will vary depending on the size of the video you’re converting. Conversion was successful! The MP3 you converted will be in the same directory you downloaded the video to. Now you’re ready to listen to your MP3 or import it to your Zune, iTunes, or music library. You may also want to delete the MP4 files after the conversion if you will no longer need them. Conclusion YouTube Downloader features a very simple interface that’s user friendly and easy to use. It comes in handy when you watch videos that look horrible, but the sound quality is good. Or if you just need to hear the audio of something posted and don’t need the video. It also allows you to download from Google Video, MySpace, and others. Download YouTube Downloader Similar Articles Productive Geek Tips Download YouTube Videos with Cheetah YouTube DownloaderWatch YouTube Videos in Cinema Style in FirefoxStop YouTube Videos from Automatically Playing in FirefoxRemove Unsuitable Comments from YouTubeImprove YouTube Video Viewing in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet

    Read the article

  • JavaScript Browser Hacks

    Recently during one of my client side scripting classes, I was trying to show my students some basic examples of JavaScript as an introduction to the language.  My first basic example was to show an alert box using JavaScript via the address bar. The student’s reaction to my browser hack example really caught me off guard in a good way. After programming with a language for close to 10 years you start to lose the "Awe Cool!" effect that new learners of a language experience when writing code. New learns of JavaScript are the reason why I created this post. Please enjoy. Note: Place JavaScript in to address bar and then press the enter key. Example 1: JavaScript Alert box displaying My name: John Doe Javascript:alert('My name: \n John Doe') ; Example 2: JavaScript alert box displaying name entered by user. javascript:alert('My name: \n ' + prompt('Enter Name','Name')) ; Example 3: JavaScript alert box displaying name entered by user, and then displays the length of the name. javascript:var name= prompt('Enter Name','Name'); alert('My name: \n ' + name); alert(name.length); If you notice, the address bar will execute JavaScript on the current page loaded in the browser using the Document Object Model (DOM). Additionally, the address bar will allow multiple lines to be executed sequentially even though all of the code is contained within one line due to the fact that the JavaScript interpreter uses the “;” to indicate where a line of ends and a new one begins. After doing a little more research on the topic of JavaScript Browser Hacks I found a few other cool JavaScript hacks which I will list below. Example 4: Make any webpage editableSource: http://www.openjason.com/2008/09/02/browser-hack-make-any-web-page-editable/ javascript:document.body.contentEditable='true'; document.designMode='on'; void 0; Example 5: CHINESE DRAGON DANCING Source: http://nzeyi.wordpress.com/2009/06/01/dwrajaxjavascript-hacks-the-secrets-of-javascript-in-the-adress-bar/ javascript:R=0;x1=0.1;y1=0.05;x2=0.25;y2=0.24;x3=1.6; y3=0.24;x4=300;y4=200;x5=300;y5=200;DI=document.links; DIL=DI.length;A=function(){for(i=0;i-DIL;i++){DI[i].style. position='absolute';DI[i].style.left=Math.sin(R*x1+i*x2+x3)*x4+ x5;DI[i].style.top=Math.cos(R*y1+i*y2+y3)*y4+y5}R++;}; setInterval('A()',5);void(0); Example 6: Reveal content stored in password protected fields javascript:(function(){var s,F,j,f,i; s = “”; F = document.forms; for(j=0; j Example 7: Force user to close browser windowSource: http://forums.digitalpoint.com/showthread.php?t=767053 javascript:while(1){alert('Restart your brower to close this box!')} Learn more about JavaScript Browser Hacks.

    Read the article

  • How can I back up my ubuntu system?

    - by Eloff
    I'm sure there's a lot of questions on here similar to this, and I've been reading them, but I still feel this warrants a new question. I want nightly, incremental backups (full disk images would waste a lot of space - unless compressed somehow.) Preferably rotating or deleting old backups when running out of space or after a fixed number of backups. I want to be able to quickly and painlessly restore my system from these backups. This is my first time running ubuntu as my main development machine and I know from my experience with it as a server and in virtual machines that I regularly manage to make it unbootable or damage it to the point of being unable to rescue it. So how would you recommend I do this? There are so many options out there I really don't know where to start. There seems to be a vocal school of thought that it's sufficient to backup your home directory and the list of installed packages from the package manager. I've already installed lots of things from source, or outside of the package manager (development tools, ides, compilers, graphics drivers, etc.) So at the very least, if I do not back up the operating system itself I need to grab all config files, all program binaries, all created but required files, etc. I'd rather backup too much than too little - an ubuntu install is tiny anyway. Also this drastically reduces the restore time, which would cost me more in my time than the extra storage space. I tried using Deja Dup to backup the root partition, excluding some things like /mnt /media /dev /proc etc. Although many websites assured me you can backup a running linux system this way - that seems to be false as it complained that it could not backup the following files: /boot/System.map-3.0.0-17-generic /boot/System.map-3.2.0-22-generic /boot/vmcoreinfo-3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic /boot/vmlinuz-3.2.0-22-generic /etc/.pwd.lock /etc/NetworkManager/system-connections/LAN Connection /etc/apparmor.d/cache/lightdm-guest-session /etc/apparmor.d/cache/sbin.dhclient /etc/apparmor.d/cache/usr.bin.evince /etc/apparmor.d/cache/usr.lib.telepathy /etc/apparmor.d/cache/usr.sbin.cupsd /etc/apparmor.d/cache/usr.sbin.tcpdump /etc/apt/trustdb.gpg /etc/at.deny /etc/ati/inst_path_default /etc/ati/inst_path_override /etc/chatscripts /etc/cups/ssl /etc/cups/subscriptions.conf /etc/cups/subscriptions.conf.O /etc/default/cacerts /etc/fuse.conf /etc/group- /etc/gshadow /etc/gshadow- /etc/mtab.fuselock /etc/passwd- /etc/ppp/chap-secrets /etc/ppp/pap-secrets /etc/ppp/peers /etc/security/opasswd /etc/shadow /etc/shadow- /etc/ssl/private /etc/sudoers /etc/sudoers.d/README /etc/ufw/after.rules /etc/ufw/after6.rules /etc/ufw/before.rules /etc/ufw/before6.rules /lib/ufw/user.rules /lib/ufw/user6.rules /lost+found /root /run/crond.reboot /run/cups/certs /run/lightdm /run/lock/whoopsie/lock /run/udisks /var/backups/group.bak /var/backups/gshadow.bak /var/backups/passwd.bak /var/backups/shadow.bak /var/cache/apt/archives/lock /var/cache/cups/job.cache /var/cache/cups/job.cache.O /var/cache/cups/ppds.dat /var/cache/debconf/passwords.dat /var/cache/ldconfig /var/cache/lightdm/dmrc /var/crash/_usr_lib_x86_64-linux-gnu_colord_colord.102.crash /var/lib/apt/lists/lock /var/lib/dpkg/lock /var/lib/dpkg/triggers/Lock /var/lib/lightdm /var/lib/mlocate/mlocate.db /var/lib/polkit-1 /var/lib/sudo /var/lib/urandom/random-seed /var/lib/ureadahead/pack /var/lib/ureadahead/run.pack /var/log/btmp /var/log/installer/casper.log /var/log/installer/debug /var/log/installer/partman /var/log/installer/syslog /var/log/installer/version /var/log/lightdm/lightdm.log /var/log/lightdm/x-0-greeter.log /var/log/lightdm/x-0.log /var/log/speech-dispatcher /var/log/upstart/alsa-restore.log /var/log/upstart/alsa-restore.log.1.gz /var/log/upstart/console-setup.log /var/log/upstart/console-setup.log.1.gz /var/log/upstart/container-detect.log /var/log/upstart/container-detect.log.1.gz /var/log/upstart/hybrid-gfx.log /var/log/upstart/hybrid-gfx.log.1.gz /var/log/upstart/modemmanager.log /var/log/upstart/modemmanager.log.1.gz /var/log/upstart/module-init-tools.log /var/log/upstart/module-init-tools.log.1.gz /var/log/upstart/procps-static-network-up.log /var/log/upstart/procps-static-network-up.log.1.gz /var/log/upstart/procps-virtual-filesystems.log /var/log/upstart/procps-virtual-filesystems.log.1.gz /var/log/upstart/rsyslog.log /var/log/upstart/rsyslog.log.1.gz /var/log/upstart/ureadahead.log /var/log/upstart/ureadahead.log.1.gz /var/spool/anacron/cron.daily /var/spool/anacron/cron.monthly /var/spool/anacron/cron.weekly /var/spool/cron/atjobs /var/spool/cron/atspool /var/spool/cron/crontabs /var/spool/cups

    Read the article

  • How to Add a Note to an Email Message in Outlook 2013

    - by Lori Kaufman
    There may be times when you want to add a note to an email message you received. Maybe you need to remember something about the sender or the contents of the email. There are several ways to add a note to an email message. NOTE: You can also create a new task containing an email message you received. This is useful if you need to do something related to the email. The new task will contain all the contents (except attachments) from the email. One method of adding a note to an email message is to flag the message. To do this, right-click on the flag icon in the flag column for the message to which you want to add a note. Select Custom from the popup menu. On the Custom dialog box, you can select a ready-made note from the Flag to drop-down list. You can also type a custom note in the Flag to edit box. Select a Start date and a Due date and setup a reminder, if desired. Click OK. The flag displays above the body of the email message when you double-click on the message to open it in the Message window. You can also put the cursor in the subject line of the message and add text to it, as shown below. When you close the message window, a confirmation dialog box displays asking if you want to save your changes. To save the note you added to the subject line, click Yes. Your note displays as part of the subject line on the message in your list of email messages. You can also add a note to the body of an email message. To do this, you must enable editing of the message. Double-click the message to open the Message window. Click Actions in the Move section of the Message tab and select Edit Message from the drop-down menu. Click in the body of the message and type your note. When you close the Message window, a confirmation dialog box displays asking if you want to save your changes. Click Yes to save you note in the body of the email. You can see the note you added if it is visible as part of the first line of the body displayed in the list of email messages. Use the Notes section of Outlook to create a separate note you can attach to an email message. To do this, click the … button on the Navigation Bar and select Notes from the popup menu. Click New Note on the Home tab of the Notes window (or press Ctrl + N) to create a note. Enter the text for your note in the small note window that displays and click the X button to close the note, saving it. To attach the note to the email message, make sure the Mail section of Outlook is active. Double-click on the message onto which you want to attach the note. Leaving the Message window open, go back to the main Outlook window and select Notes from the Navigation Bar, as mentioned above. Drag the note you created to the message window. The note is added to the message as an attachment. When you close the Message window, a confirmation dialog box displays asking if you want to save your changes. To save the message with your note added as an attachment, click Yes. A paperclip icon is added to the message in the list of email messages, indicating there is an attachment in the message. When you add a note to an email message as an attachment using the Notes section of Outlook, you don’t have to keep the original note. The note is now saved with the message, and can be deleted from the Notes section.     

    Read the article

  • Knowledge Pathways Designer - Recommended Settings

    - by ted.henson
    The General page of the Options dialog box contains the application preferences for Knowledge Pathways Designer. It is recommended that you leave certain settings as they are, unless you have a specific reason for changing them. The following are a few of the settings on the General page with an explanation of the recommended setting. They are in the order they appear on the page: Allow version 2.0 style links: This option should remain disabled unless you were using content that was created using version 2.0 of Knowledge Pathways and you want the same linking functionality that existed in that version 2.0. This feature enables you to reuse parts of titles that contain no AUs. However, keep in mind that this type of link is not a true link, but a cross between a copy and a link. To create a 2.0 style link, you drag and drop sections between titles. You can only create 2.0 style links to sections that belong to the Title AU. When creating a version 2.0 style link, your mouse pointer will change to indicate a 2.0 link is being created. Confirm deletion of outline items and Confirm deletion of titles: It is recommended that these options remain enabled to avoid deleting something by accident. Display tracking data loss warning when opening a published title: It recommended that this option be enabled so you will receive the warning message when you open the development copy of a title, reminding you of the implications of your changes. ulCopy files when converting a Section to an Assignable Unit: This option should remain enabled unless you have a specific reason for not copying the files. If this is disabled, you will (in effect) lose your content files upon converting because they will not be copied to the new AU directory on the content root. In this case, you would need to use Windows Explorer to copy your files manually. Working with Spelling Options All of the spelling options are enabled by default. Your design team can review these options to determine if you want to make changes, depending upon your specific needs. Understanding Dictionary Options You should leave the dictionary options as they are, unless you have a specific reason for changing them. While you can delete the user (customizable) dictionary, doing so is not recommended. Setting Check In/Check Out Options The ability to check in and check out titles and AUs will impact the efficiency of your design team. Decide what your check in and check out processes are before you start developing titles. The Check In/Check Out page of the Options dialog box contains two options that affect what happens when you open a title using the Open Title dialog box. Both of these options are enabled by default and are described below: Check Out for editing enabled: This option ensures that the Check Out for editing option will be selected when you open the development copy of a title from the Open Title dialog box. If this option is disabled, you must select the Check Out for editing option every time you want to check out a title for editing. Attempt to Check Out for entire branch: When this option is enabled, Designer checks out the selected title and all AUs and sections that are part of that title, provided they are available for check out. If this option is disabled, you will only check out the Title AU and anything that belongs to that Title AU (e.g., sections, questions, etc.), but not other AUs. The Check In/Check Out page of the Options dialog box also contains options that control what happens when you close a title. You can choose one option in the Check In when Closing a Title area. The option selected is a matter of preference and you should determine which option is most appropriate for your design team.

    Read the article

  • The Power to Control Power

    - by speakjava
    I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

    Read the article

  • Collision 2D Quads

    - by Vico Pelaez
    I want to detect collision between two 2D squares, one square is static and the other one moves according to keyboard arrows. I have implemented some code, however nothing happens when they overlap each other and what I tried to achieve in the code was to detect an overlapping between them. I think I am either not understanding the concept really well or that because one of the squares is moving this is not working. Please I would really appreciate your help. Thank you! float x1=0.05 ,Y1=0.05; float x2=0.05 ,Y2=0.05; float posX1 =0.5, posY1 = 0.5; float movX2 = 0.0 , movY2 = 0.0; struct box{ int width=0.1; int heigth=0.1; }; void init(){ glClearColor(0.0, 0.0, 0.0, 0.0); glColor3f(1.0, 1.0, 1.0); } void quad1(){ glTranslatef(posX1, posY1, 0.0); glBegin(GL_POLYGON); glColor3f(0.5, 1.0, 0.5); glVertex2f(-x1, -Y1); glVertex2f(-x1, Y1); glVertex2f(x1,Y1); glVertex2f(x1,-Y1); glEnd(); } void quad2(){ glMatrixMode(GL_PROJECTION); glLoadIdentity(); glPushMatrix(); glTranslatef(movX2, movY2, 0.0); glBegin(GL_POLYGON); glColor3f(1.5, 1.0, 0.5); glVertex2f(-x2, -Y2); glVertex2f(-x2, Y2); glVertex2f(x2,Y2); glVertex2f(x2,-Y2); glEnd(); glPopMatrix(); } void reset(){ //Reset position of square??? movX2 = 0.0; movY2 = 0.0; collisionB = false; } bool collision(box A, box B){ int leftA, leftB; int rightA, rightB; int topA, topB; int bottomA, bottomB; //Calculate the sides of box A leftA = x1; rightA = x1 + A.width; topA = Y1; bottomA = Y1 + A.heigth; //Calculate the sides of box B leftB = x2; rightB = x2 + B.width; topB = Y1; bottomB = Y1+ B.heigth ; if( bottomA <= topB ) return false; if( topA >= bottomB ) return false; if( rightA <= leftB ) return false; if( leftA >= rightB ) return false; return true; } float move_unit = 0.1; void keyboardown(int key, int x, int y) { switch (key){ case GLUT_KEY_UP: movY2 += move_unit; break; case GLUT_KEY_RIGHT: movX2 += move_unit; break; case GLUT_KEY_LEFT: movX2 -= move_unit; break; case GLUT_KEY_DOWN: movY2 -= move_unit; break; default: break; } glutPostRedisplay(); } void display(){ glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glMatrixMode(GL_PROJECTION); glLoadIdentity(); cuad1(); if (!collision) { cuad2(); } else{ reset(); } glFlush(); } int main(int argc, char** argv){ glutInit(&argc, argv); glutInitDisplayMode(GLUT_SINGLE | GLUT_RGB); glutInitWindowSize(500,500); glutInitWindowPosition(0, 0); glutCreateWindow("Collision Practice"); glutSpecialFunc(keyboardown); glutDisplayFunc(display); init(); glutMainLoop(); }

    Read the article

  • C# Dev Challenge Part 1 of n &ndash; Beginner Edition

    - by mbcrump
    I developed this challenge to test one’s knowledge of C Sharp. I am planning on creating several challenges with different skill sets, so don’t get mad if this challenge doesn’t well challenge you... I noticed that most people like short quizzes so this one only contains 5 questions. All of the challenges are clear and concise of what I am asking you to do. No smoke and mirrors here, meaning that none of the code has syntax errors. The purpose of this exercise is to test several OOP concepts and see how much of the C# language you really know. Question #1 – Lets start off Easy… Will the following code snippet compile successfully? What does this question test? - Can this compile without a namespace? Do you have to have an entry point of “static void Main()”? class Test { static int Main() { System.Console.WriteLine("Developer Challenge"); return 0; } } Answer (select text in box below): Yes, it will compile successfully. Question #2 – What is the value of the Console.WriteLine statements? What does this question test? – Do I understand reference types/value types? If a variable is declared with the @ symbol and its not a reserved keyword does the application compile successfully? using System; internal struct MyStruct { public int Value; } internal class MyClass { public int Value; } class Test { static void Main() { MyStruct @struct1 = new MyStruct(); MyStruct @struct2 = @struct1; @struct2.Value = 100; MyClass @ref1 = new MyClass(); MyClass @ref2 = @ref1; @ref2.Value = 100; Console.WriteLine("Value Type: {0} {1}", @struct1.Value, @struct2.Value); Console.WriteLine("Reference Type: {0} {1}", @ref1.Value, @ref2.Value); } } Answer (select text in box below): Value Type: 0 100 Reference Type: 100 100 Question #3 – What is the value of the Console.WriteLine statements? What does this question test? – Can 2 objects reference the same point in memory? using System; class Test { static void Main() { string s1 = "Testing2"; string t1 = s1; Console.WriteLine(s1 == t1); Console.WriteLine((object)s1 == (object)t1); } } Answer (select text in box below): True True Question #4 – What is the value of the Console.WriteLine statements? What does this question test? – How does the “Stack” work – LIFO or FIFO?   using System; using System.Collections; class Test { static void Main() { Stack a = new Stack(5); a.Push("1"); a.Push("2"); a.Push("3"); a.Push("4"); a.Push("5"); foreach (var o in a) { Console.WriteLine(o); } } } Answer (select text in box below): 5 4 3 2 1 Question #5 – What is the value of the Console.WriteLine statements? What does this question test? – Array and General Looping Knowledge. using System; namespace ConsoleApplication5 { class Program { static void Main(string[] args) { int[] J_LIST = new int[5] { 1, 2, 3, 4, 5 }; int K = 10; int L = 5; foreach (var J in J_LIST) { K = K - J; L = K + 2 * J; Console.WriteLine("J = {0, 5} K = {1, 5} L = {2, 5}", J, K, L); } Console.ReadLine(); } } } Answer (select text in box below): J = 1 K = 9 L = 11 J = 2 K = 7 L = 11 J = 3 K = 4 L = 10 J = 4 K = 0 L = 8 J = 5 K = -5 L = 5 Stay Tuned for more challenges!

    Read the article

  • How to get the height of an image and apply that height to a div? [migrated]

    - by Mick79
    I am building a mobile web app and I'm using jquerytools slider on it. i want te slider to show (in proper ratio) across all mobile devices so width of the images is 100% and height is auto in css. However as all the elements are floated and jquerytools slider requires the position be set to absolute, the containing div (#header) doesn't stretch to fit the content. I am trying to use jquery to get the height of the height of the img and apply that height to the header.... however I am having no luck. CSS: #header{ width:100%; position:relative; z-index: 20; /* box-shadow: 0 0 10px white; */ overflow: auto; } .scrollable { position:relative; overflow:hidden; width: 100%; height: 100%; /* box-shadow: 0 0 20px purple; */ /* height:198px; */ z-index: 20; overflow: auto; } .scrollable .items { /* this cannot be too large */ width:1000%; position:absolute; clear:both; /* box-shadow: 0 0 30px green; */ } .items div { float:left; width:10%; height:100%; } /* single scrollable item */ .scrollable img { /* float:left; */ width:100%; height: auto; /* height:198px; */ } /* active item */ .scrollable .active { border:2px solid #000; position:relative; cursor:default; } HTML <div id=header><!-- root element for scrollable --> <div class="scrollable" id="scrollable"> <!-- root element for the items --> <div class="items"> <div> <img src="img/img2.jpg" /> </div> <div> <img src="img/img1.jpg" /> </div> <div> <img src="img/img3.jpg" /> </div> <div> <img src="img/img4.jpg" /> </div> <div> <img src="img/img6.jpg" /> </div> </div><!-- items --> </div><!-- scrollable --> </div><!-- header -->

    Read the article

  • Multiple markers in Googe Maps API v3 that link to different pages when clicked

    - by Dave
    I have a map with multiple markers, which I populate via an array. Each marker is clickable and should take the user to a different url per marker. The problem is that all the markers, while displaying the correct title, all use the url of the last entry in the array. Here is my code: var myOptions = { zoom: 9, center: new google.maps.LatLng(40.81940575,-73.95647955), mapTypeId: google.maps.MapTypeId.TERRAIN } var map = new google.maps.Map(document.getElementById("bigmap"), myOptions); setMarkers(map, properties); var properties = [ ['106 Ft Washington Avenue',40.8388485,-73.9436015,'Mjg4'], ['213 Bennett Avenue',40.8574384,-73.9333426,'Mjkz'], ['50 Overlook Terrace',40.8543752,-73.9362542,'Mjky'], ['850 West 176 Street',40.8476012,-73.9417571,'OTM='], ['915 West End Avenue',40.8007478,-73.9692155,'Mjkx']]; function setMarkers(map, buildings) { var image = new google.maps.MarkerImage('map_marker.png', new google.maps.Size(19,32), new google.maps.Point(0,0), new google.maps.Point(10,32)); var shadow = new google.maps.MarkerImage('map_marker_shadow.png', new google.maps.Size(28,32), new google.maps.Point(0,0), new google.maps.Point(10,32)); var bounds = new google.maps.LatLngBounds; for (var i in buildings) { var myLatLng = new google.maps.LatLng(buildings[i][1], buildings[i][2]); bounds.extend(myLatLng); var marker = new google.maps.Marker({ position: myLatLng, map: map, shadow: shadow, icon: image, title: buildings[i][0] }); google.maps.event.addListener(marker, 'click', function() { window.location = ('detail?b=' + buildings[i][3]); }); } map.fitBounds(bounds); } Using this code, clicking any marker take the user to 'detail?b=Mjkx' What am I doing wrong?

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >