Search Results

Search found 12264 results on 491 pages for 'drive letter'.

Page 84/491 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • Trying to use HUAWEI E173 on Ubuntu 12.04

    - by Scott Warren
    I have a HUAWEI E173 usb stick to access the internet. It works normally on windows but I need to use it on my Ubuntu system. I plug it in, and after 25-20 seconds the status light turns green and blinks twice every 3 seconds. I see no changes in my system whatsoever, nothing gets installed, I don't get prompted for my PIN. I tried to create a connection using edit connections. I entered the following parameters: Turkey, Turkcell, My Plan is not listed, Internet. Nothing happens. I tried the lsusb command and got the following: tosh2000@tosh:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 058f:a001 Alcor Micro Corp. Bus 001 Device 004: ID 12d1:14ba Huawei Technologies Co., Ltd. I tried the usb-devices command and can see the device: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=14ba Rev=00.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Based on other advice I found, I tried the following command: sudo modprobe usbserial vendor=0x12d1 product=0x14ba Again, nothing happened. My question is why does the "enable mobile broadband" not populate automatically in the dropdown networking menu and how can I can I start using the device? Thank you.

    Read the article

  • Unable to format 16Gb Usb Disk

    - by akshay.is.gr8
    Whenever i try to format my 16 GB usb disk using gparted it does to formating and when it refreshes then show unknown. tried disk utility as well. disk utility was able to format it into FAT but files vanish web the disk is removed and attached again. edit: the disk format completes every time but when using gparted it immediately show Unknown type file system and disk utility show FAT but when the Disk is unplugged and then connected the files are not there. either way it is unusable.

    Read the article

  • remove failed ubuntu installation

    - by kapitanluffy
    i tried installing ubuntu alongside windows 7 Installing Ubuntu alongside Windows and i failed so i decided to go with wubi again. after installing it, i noticed a separate hard disk. i investigated and found out that this hard disk is actually for the failed installation. i don't know where to find it inside the windows system. can anyone please teach me how to remove the 'failed' hard disk. here's a screenshot the left side is the current filesystem. the right side on the other hand is the 'failed' harddisk. i verified that it is the failed one because the wubi installation will provide a 'host' folder for the current partition it is currently installed. i tried looking for the 'failed' one using the windows' commandline but i don't know where to look for the 'failed' disk. (i used the cmd coz i don't want root.disk to mysteriously disappear again.) see http://ubuntu-with-wubi.blogspot.com/2011/01/mystery-of-disappearing-rootdisk.html

    Read the article

  • Can I do an install onto a 4GB usb stick which is smaller than the recommended installation size?

    - by Radek
    I've read through this question: How do I install Ubuntu to a USB key? So I am aware how to install Ubuntu onto a USB stick. I'm also aware that the minimum recommended HDD requirement for ubuntu is 5GB. my question is specifically, can I squeeze the install of Ubuntu 11.10 onto a 4GB usb stick? Can I do so without downloading alternate version of Ubuntu? All I want is firefox wi-fi What I have live USB of Ubuntu 11.10 notebook without hdd internet access 4GB usb stick The reason why I need full install is to install new programs (skype) and do upgrade (of flash player)

    Read the article

  • How to format FAT32 filesystem infected with windows virus and that is write protected

    - by explorex
    Hi, I have a pendrive with FAT32 filesystem. it is infected with virus dont know which but has autorun.inf and create exe file within folder. I tried to format it with various filesystems and even try to delete it with GParted but couldn't because it says it is write protected i can't even delete files. How to format it? user@explorerx:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbd04bd04 Device Boot Start End Blocks Id System /dev/sda1 * 1 498 3998720 82 Linux swap / Solaris Partition 1 does not end on cylinder boundary. /dev/sda2 499 19457 152287585+ f W95 Ext'd (LBA) /dev/sda5 5100 10198 40957686 7 HPFS/NTFS /dev/sda6 10199 14787 36861111 7 HPFS/NTFS /dev/sda7 14788 19457 37511743+ 7 HPFS/NTFS /dev/sda8 499 5099 36956160 83 Linux Partition table entries are not in disk order Disk /dev/sdc: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc13bc13b Device Boot Start End Blocks Id System /dev/sdc1 1 9729 78143488 7 HPFS/NTFS /dev/sdc2 9729 19457 78143488 7 HPFS/NTFS Disk /dev/sdb: 4194 MB, 4194304000 bytes 112 heads, 47 sectors/track, 1556 cylinders Units = cylinders of 5264 * 512 = 2695168 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 2 1557 4091904 b W95 FAT32

    Read the article

  • Mounting a Microsoft Azure CloudDrive in a VMRole

    - by SeanBarlow
    Mounting a Drive in a VMRole is a little more complicated then a web or worker.  The Web and Worker roles offer OnStart and OnStop events, which you can use to mount or unmount your drives. The VMRole does not have these same events so you have to provide another way for the drives to be mounted or unmounted. The problem I have run into is what if you have multiple drives and you only want to mount certain drives. How do you let your user mount the drive. I am not going to go into details on what kind of GUI to present to the user. I have done this in a simple WPF application as well as a console application. We are going to need to get the storage account details. One thing to note when you are mounting cloud drives you cannot use https and have to use http. We force the use of http by using false when we create the CloudStorageAccount.   StorageCredentialsAccountAndKey credentials = new StorageCredentialsAccountAndKey("AccountName", "AccountKey"); CloudStorageAccount storageAccount = new CloudStorageAccount(credentials, false);   Next we need to get a reference to the container.   var blobClient = storageAccount.CreateCloudBlobClient(); var container = blobClient.GetContainerReference("ContainerName");   Now we need to get a list of the drives in the container   var drives = container.ListBlobs();   Now that we have a list of the drives in the container we can let the user choose which drive they want to mount. I am just selecting the 1st drive in the list for the example and getting the Uri of the drive.   var driveUri = drives.First().Uri;   Now that we have the Uri we need to get the reference to the drive. var drive = new CloudDrive(driveUri, storageAccount.Credentials);   Now all that is left is to mount the drive.   var driveLetter = drive.Mount(0, DriveMountOptions.None);   To unmount the drive all you have to do is call unmount on the drive. drive.Unmount();   You do need to make sure you unount the drives when you are done with them. I have run into issues with the drives being locked until the VMRole is rebooted. I have also managed to have a drive be permanently locked and I was forced to delete it and upload it again. I have been unable to reproduce the permanent lock but I am still trying. The CloudDrive class provides a handy method to retrieve all the mounted drives in the Role. foreach (var drive in CloudDrive.GetMountedDrives()) {          var mountedDrive = Account.CreateCloudDrive(drive.Value.PathAndQuery);          mountedDrive.Unmount(); }

    Read the article

  • How to tell thunar to stop using my device?

    - by Guillaume Coté
    When I do sudo umount /media/KINGSTON I got umount: /media/KINGSTON: device is busy. By using fuser -c /media/KINGSTON And cat /proc/<pid>/cmdline I found that the process is thunar--deamon. I closed all file manager windows. When I try to umount it by right cliking on the desktop, it also gave an error : An application is preventing the volume "KINGSTON" from being unmounted I am affraid that killing Thunar is going to impact other process running in other terminal. How can I tell it that I don't need this usb key anymore so it stop using it?

    Read the article

  • fat32 partition lock

    - by gsedej
    Hi! A am asking about problem with USB data stick (that uses fat32 file system). If you unplug USB stick without unmounting (safly remove) data may become locked when you mount USB stick another time (you can't make changes to files). If you unmount and mount partition few times, data becomes normally accessable. Problem is that I can not repeat (force) this problem now. But it has happend many times even recently. Has this been happening to somoeone else?

    Read the article

  • Do I need to replace my hard disk?

    - by Sneha Kamath
    Hello everyone. Whenever I start my computer Ubuntu pops up the following error: A hard disk may be failing one or more hard disk report health problems A friend of mine ran some test and it was found that my hard disk has 74 bad sectors. Is this merely a software issue that will be solved after a complete format of my hard disk, or is it a hardware issue and I will have to replace my hard disk? Awaiting your responses. Thanks, Sneha Kamath.

    Read the article

  • Spinup time failure

    - by bioShark
    I am not sure this is a real question or a bug I should report Ubuntu. Using: Ubuntu 11.10, on a Intel Q6600, Samsung Spinpoint F4 2TB. I have set my PC on Suspend and after I came back, pressed Enter and after logging in everything was back to normal. However, I had a message from Disk Utility that one disk reports errors. I entered Disk Utility, and my Samsung 2TB disk, the one on which my Ubuntu is installed, had the SMART Status turned red, with error message on it. The error was: Spinup time failed Value 21, Threshold value was 25 (so the error was reported because 21 < 25) I restarted and booted up in Windows to see what HD Tune is reporting. Unfortunately it was exactly the same 21/25. After reading up on Wiki about SMART and the errors, I discovered that Spinup time is the time required for the disk to reach full spinning speed in milliseconds. Then it hit me that, in Ubuntu I had Suspended the system, making essentially all my hardware stop. And when I rebooted to Windows, the hardware doesn't really stop, so SMART's reading of the Spinup time was still from Ubuntu's suspension. So I did a full PC stop and then booted up again, both in Ubuntu and Windows to see if there are different readings. Both reported successful Spinup time, 68 (a little better then 21 :) ), although in Disk Utility I have a nice message: Failed in the Past So now I am pretty sure that Ubuntu didn't handle the Suspend correctly, but then again should I worry about Imminent hardware failure ? Am I missing some drivers? Should I report this as a bug to Ubuntu? Sorry if this was a bad place to ask this question.

    Read the article

  • VirtualBox : increase hard disk size of the virtual machine

    - by wim
    I have run out of space on my WinXP virtual machine, which I only gave 10 GB space for when I created it. Is there an easy way to increase it to, say, 20 GB? I can't see any obvious option in VirtualBox settings. edit: the suggestion below gives this error wim@wim-ubuntu:/media/data/winxp_vm$ VBoxManage modifyhd wim.vdi --resize 20000 VBoxManage: error: Cannot register the hard disk '/media/data/winxp_vm/wim.vdi' {46284957-2c09-4e70-8a49-bfbe0f7f681d} because a hard disk '/home/wim/VirtualBox VMs/winxp_vm/wim.vdi' with UUID {46284957-2c09-4e70-8a49-bfbe0f7f681d} already exists VBoxManage: error: Details: code NS_ERROR_INVALID_ARG (0x80070057), component VirtualBox, interface IVirtualBox, callee nsISupports Context: "OpenMedium(Bstr(pszFilenameOrUuid).raw(), enmDevType, AccessMode_ReadWrite, fForceNewUuidOnOpen, pMedium.asOutParam())" at line 210 of file VBoxManageDisk.cpp edit2: removing the .vdi from VirtualBox before calling VBoxManage command, then adding it back in, was successful. But now I can't boot the virtual machine, I get this worrying screen: By the way, it says FATAL: Could not read from the boot medium! System halted. edit3: The vdi must be reattached to the VM after VBoxManage command. Further, the partition will need to be resized from WITHIN windows, because you will have this empty space: I was able to resize the partition easily using a bit of freeware called EASEUS Partition Master 9.1.0 Home Edition.

    Read the article

  • How To Dual Boot Windows 7 and Ubuntu in 32GB SSD

    - by Hussain
    In my System I have a 32GB SSD and a 500GB HDD. I want to dual Boot My Windows OS and Ubuntu OS in the Same SSD HardDisk..but i am Unable to do that...afterwards i tried to install Both the OS in my 500 GB HDD, but it then also is Not Dual Booting.... Then i have Tried to Boot my Ubuntu in 32 SSD & Windows 7 in HDD, So While Booting it Starts with Windows 7... So My Question is First of all How To Dual Boot Windows 7 and Ubuntu in 32 GB SSD.. and if Not Possible then... Why is it Not Booting From 500GB HDD.. Please Help Me..... Thanxx in Advance..

    Read the article

  • Very slow write access to SSD disks on some Asus P8Z77 motherboards

    - by lenik
    I have Asus P8Z77-V LK motherboard, that ran Mint 13 (based on Ubuntu 12.04) just perfectly, but recently I've tried to install Mint 17 and noticed abysmal write performance. Write speed on SSD disk was about 1.5MB/sec, when it's supposed to be in 150-250MB/sec range. For write testing I've used dd if=/dev/zero of=/dev/sda bs=10M count=10 while booted up from LiveCD. I have also tested the read speed with hdparm -tT /dev/sda and got about 440MB/sec -- that's normal. I can tell, the read performance has not degraded at all and is not an issue here. Since I had a few different SSD disks and few motherboards, I've tested and tested and here are results: Asus P8H77 works fine with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V LK works with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V PRO works with Mint13, and works just fine with Mint14, 15, 16 and 17. The only difference between "PRO" version and others is that it has extra SATA controller onboard (in addition to the Z77 chipset SATA controller) providing extra 2 SATA ports. SSD disks work fine with "PRO" version when connected to the native SATA ports as well as to the ports provided by extra SATA controller, so this does not look like a hardware issue. As far as I can tell, there's something changed in the kernel while going from 3.2 to 3.5, that affects the detection of onboard SATA controller for Asus P8*77 motherboards, that screws up the write speed for SSD drives. Could anyone shed some light on how to fix this issue or, possibly, give a pointer to a more suitable place to ask this question?

    Read the article

  • USB Device first mounted as root, then by user

    - by Petr Marek
    When I connect my Kindle, it shows up as an usb0 media, which I can read but not write (owner = root). However, if I do sudo umount /media/usb0, usb0 gets unmounted and a Kindle media gets mounted properly (is writable etc.). What can cause such strange behavior? It's not only with Kindle, but with Flash drives etc. as well. My /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=595815c2-d882-4ec8-a2cd-cce70471167c / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda6 during installation #UUID=1340a336-66ca-4743-a6e4-41a307af2dda /boot ext4 defaults 0 3 # swap was on /dev/sda5 during installation UUID=afa49f1d-d505-4166-82a2-2f44548a48c6 none swap sw 0 0 UUID=deb86039-528a-45f3-b5f9-ce528740c94e /data_hdd ext4 defaults 0 2 My groups: petr@sova:~$ groups petr petr : petr adm cdrom sudo dip plugdev fuse lpadmin sambashare bumblebee

    Read the article

  • How to mount an external HDD?

    - by Slash
    I have Ubuntu Linux 12.04 version the latest right now.I want to mount an external HDD NTFS 1TB.I have followed many guides but still no success.The error I'm getting is this: Failed to read last sector (1953523119): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? Using Storage Device MAnager i get this error:Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/Skliros_Diskos {external disk name} When I use sudo fdisk -l, this is the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e0bc6 Device Boot Start End Blocks Id System /dev/sda1 * 2048 618854399 309426176 83 Linux /dev/sda2 618856446 625141759 3142657 5 Extended /dev/sda5 618856448 625141759 3142656 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002093a Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 7 HPFS/NTFS/exFAT

    Read the article

  • SMART Status Data Interpretation - Disk Utility

    - by Mah
    Last week my external harddisk (Seagate Barracuda 1.5TB in a custom enclosure) showed signs of failure (Disk Utility SMART Pre-failure status - several bad sectors) and I decided to change it. I bought a new HDD (Seagate Barracuda 2TB) and connected it to my Ubuntu box with a SATA to USB cable that could not report SMART status. I copied all the contents of the old HDD to the new HDD (one partition with rsync, the other with parted cp) and then gently replaced the old HDD with the new one inside my aluminum enclosure. For obscure reasons after reconnecting the new HDD through the old enclosure, the Linux box could not detect my partitions. I recovered the partitions with testdisk and restarted the computer. After the restart I checked the SMART status of the new HDD an I get this: Read Error Rate --------------- Normalized 108 Worst 99 Threshold 6 Value 16737944 I got a high value on the Seek Error Rate as well. Wondering why this happens I copied 2 GB directory from one partition to the other and rechecked the SMART status (5 minutes later). This time I got the following: Read Error Rate --------------- Normalized 109 Worst 99 Threshold 6 Value 24792504 As you see there has been an increase in the error rate. I am unable to interpret these numbers. Is my new hard disk already dying? What are the acceptable values in these fields for Seagate hard disks? Then why the assessment is still good? While I could get temperature and airflow temperature data from my old HDD, I can not fetch them for the new one. I noticed that my old hdd had got really hot sometimes. Is it possible that the enclosure is killing the harddisks due to high temperature?... Thanks

    Read the article

  • "sr0" I/O read boot error in Xubuntu 12.10

    - by Entropicurity
    Just recently upgraded Xubuntu 12.10 after having installed 12.04 originally. Ever since that happened, any time I inserted a disk into my DVD/CD reader/writer I would end up getting a number of error messages from my DVD player/Audio player softer, typically with any of them either crashing or returning a GStreamer backend error. So doing some research I tried to mount it manually, and it typically returned the error messages you'll see below: (using the dmesg | grep "sr0" command) [17545.435584] end_request: I/O error, dev sr0, sector 0 [17545.492968] sr 3:0:0:0: >[sr0] [17545.492981] sr 3:0:0:0: >[sr0] [17545.492992] sr 3:0:0:0: >[sr0] [17545.493003] sr 3:0:0:0: >[sr0] CDB: [17545.493020] end_request: I/O error, dev sr0, sector 0 [17545.493058] EXT3-fs (sr0): error: unable to read superblock [17545.553224] sr 3:0:0:0: >[sr0] [17545.553237] sr 3:0:0:0: >[sr0] [17545.553247] sr 3:0:0:0: >[sr0] [17545.553258] sr 3:0:0:0: >[sr0] CDB: [17545.553275] end_request: I/O error, dev sr0, sector 0 [17545.553312] EXT4-fs (sr0): unable to read superblock [17545.611482] sr 3:0:0:0: >[sr0] [17545.611494] sr 3:0:0:0: >[sr0] [17545.611504] sr 3:0:0:0: >[sr0] [17545.611514] sr 3:0:0:0: >[sr0] CDB: [17545.611531] end_request: I/O error, dev sr0, sector 0 [17545.611568] FAT-fs (sr0): unable to read boot sector When I grepped this, the number of error messages just seemed to spill all over the screen, and typically all revolve around the I/O error. I then went into VLC and tried to run the stuff through there, but for some reason it won't read with the default devices. Instead I have to manually input sr0 into each of the /dev/ references and it will play just fine, until I exit out of the program, at which point I have to re-input everything. I have already installed all the media dependencies, both open source and restricted, through the software center. I just found this strange, as out of the box 12.04 there wasn't any problem what so ever. At this point, it could be that all my audio CD's are not in a format that is familiar with the OS (I've read in some places that EXTF4 has issues with this) but I don't see how that could be a problem when the above error messages even tested to see if it is EXT3 as well? I've tried my best to troubleshoot this up till now using existing topics, but it seems that this is a regular problem with a multitude of varying factors that incorporate into it, including but not limited to read/write problems with the format of the CD and right protection. Is there something integral that I am missing?

    Read the article

  • Can I do full install on 4GB usb stick? [closed]

    - by Radek
    Possible Duplicate: How do I install Ubuntu to a USB key? Can I do full install of Ubuntu 11.10 on 4GB usb stick? Can I do so without downloading alternate version of Ubuntu? All I want is firefox wi-fi What I have live USB of Ubuntu 11.10 notebook without hdd internet access 4GB usb stick UPDATE after this question was closed The reason why I need full install is to install new programs (skype) and do upgrade (of flash player)

    Read the article

  • How to move Ubuntu to an SSD

    - by Bart van Heukelom
    My current situation is: One hard disk Dual boot Ubuntu 11.04 and Windows 7. Partitions: 100MB Windows System thingy 144GB Main Windows 160GB Ubuntu 4GB Swap 12GB System Restore stuff Now I want to install an 80GB SSD and move Ubuntu to it. AFAIK I need to: Shrink the 160GB Ubuntu partition to 80GB Copy it over to the SSD Change fstab to mount the SSD as / How do I do the second? And what do I need to do about Grub?

    Read the article

  • Checksum Errors From Hard Disk

    - by Ademos
    After running GSmartControl, I received three checksum errors on my storage hard disk. Error in Attribute Data structure: checksum error Error in Attribute Thresholds structure: checksum error Error in ATA Error Log structure: checksum error Does this indicate a hard disk failure? Because, this is the THIRD TIME I have replaced the same hard disk. (after seeing this error) The hard disk is a Western Digital Caviar Green. (2 TB)

    Read the article

  • Deleted Partition Recovery

    - by ankur.trapasiya
    Recently i was installing ubuntu 12.04 on my system. There were 4 partitions on my system and i selected one of the four partition for the installation and chose the option of re sizing the partition. Initially my partition was of size 100+GB and i created another partition out of it of size 15GB (EXT4). Now the moment i changed this partition structure my original partition got lost along with its data and i am left with 50GB partition and 50GB unallocated free space. Now the data that i have lost is meant a lot to me and i want to recover that data. So is there any way i can recover it ? And i haven't checked "format" option while resizing the partition. Thanks in advance.

    Read the article

  • Force usb to use same device id, instead of new one

    - by m s kumar
    I am having some trouble in automating the task. I am testing some android based mobiles in linux machine. The automation script uses the device id under "/dev/bus/usb/001/"053" it will be always under bus 001 only.. But the dev is will be random like if i insert one mobile then the dev id will be 053, if remove and insert it again then the dev id will be 054.. The problem is, when some tests runs on the device and if device gets rebooted then new dev id is showing for the rebooted one and my scripts failing due to new dev id.. Is there any way to force usb devices to use same dev id instead of new one. So that there will be no issues to my tests even after device reboots. Thanks in advance.

    Read the article

  • Lost files after installing Ubuntu

    - by Joshua Rosato
    I installed Ubuntu on my laptop over windows, I had 2 partitions on one hard disk. It seems like my second partition is gone with all my files. How can I recover the old files? They weren't on the same partition as Windows. I read that the partition has probably just not been mounted so ran sudo fdisk -l to find all the partitions and then ran sudo mount, however I can't tell from the results of sudo mount what is not mounted and I am also unsure how to mount it once I find the unmounted partition. sudo fdisk -l - Results Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002c6dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris sudo mount - Results /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=joshy1)

    Read the article

  • How to change harddrive spindown time?

    - by norpol
    if I run my notebook on battery mode, ubuntu spindown my hardrive every few seconds. How can I fix that? I have tried it with sudo hdparm -S 127 /dev/sda* but I am not able to disable the spindown and can´t find the reason for this "bug". Running Ubuntu 12.04 - Bug is since 12.04 Recent updates are installed, the problem is still recent. I can change the settings via. sudo hdparm -B 127 but if I change hdparm.conf, Ubuntu does not recognize it. /dev/sda { apm_battery=127 }

    Read the article

  • Unable to mount hard disk

    - by user101522
    I am unable to mount hard disk and got this message: Unable to mount 158 GB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so From the terminal, I tried syslog - try: No command 'syslog' found, did you mean: Command 'dsyslog' from package 'dsyslog' (universe) Command 'syslogd' from package 'sysklogd' (universe) Command 'syslogd' from package 'inetutils-syslogd' (universe) Command 'syslogd' from package 'busybox-syslogd' (universe) syslog: command not found Also tried dmesg | tail: [ 971.390588] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 62 30 80 00 00 40 00 [ 971.390600] end_request: I/O error, dev sda, sector 308424832 [ 971.390605] Read-error on swap-device (8:0:308424840) [ 971.390608] Read-error on swap-device (8:0:308424848) [ 971.390617] Read-error on swap-device (8:0:308424856) [ 971.390620] Read-error on swap-device (8:0:308424864) [ 971.390623] Read-error on swap-device (8:0:308424872) [ 971.390626] Read-error on swap-device (8:0:308424880) [ 971.390629] Read-error on swap-device (8:0:308424888) [ 971.390632] Read-error on swap-device (8:0:308424896) It was fine before I tried to re-install 12.04 from the live CD (which failed due to the disk problem).

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >