Search Results

Search found 5123 results on 205 pages for 'gateway timeout'.

Page 84/205 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• Slow network interaction between 2 kvm host machines

  - by VirtualNoob

  We have 2 physical machines, Host1 is a CentOS 6.4 kvm host and hosts ~7 kvm VMs all running Ubuntu 12.04 - all of this runs perfectly. Recently we've added a 2nd host system, host2, again a CentOS 6.4 kvm host with a view to running another couple of VMs and providing some failover against host1 should it be required. Both physical machines reside in the same cabinet in our DC, and are on the same subnet - let's say host1: 1.1.1.64 and host2: 1.1.1.81. Both have their gateway set to the DC gateway of 1.1.1.254 with no hardware firewall in between. On each machine, I have 4 NICs that are bonded together to form a single interface, which is then bridged to allow the VMs to access the network. All of the VMs are online, and all of them can successfully ssh into the hosts without any delay. Both systems can access the internet fine, and I can ssh into both systems from home without any issues. However, there is a real delay when attempting to ssh from host1 to host2 (or vice versa) and this obviously means that any action required on host2, that is controlled by host1 either takes forever or results in failure due to timeout. In the interest of keeping this post short, I've put my ifcfg files into a pastie: http://pastie.org/8081648 I've tried both adding a firewall rule in each machine for the other, and also disabling the firewall entirely, so that can't be the issue. I've tried troubleshooting this myself but can't seem to get to the bottom of it. Any help or advice would be appreciated. Thanks in advance.

  Read the article

• SSH connection times out

  - by mark

  Given: vm - a WinXPsp3 virtual machine hosted by a Win7sp1 physical machine alice is the user on vm srv - a Win2008R2sp1 server bob is the user on srv quake - a linux server mark is the user on quake Both vm and srv have the same new installation of cygwin (1.7.9) and openssh. Firewall service is disabled on vm (and its host) and on srv All the machines can be pinged from all the machines. ssh mark@quake works OK from both vm and srv. ssh bob@srv works OK from both quake and vm. ssh alice@vm works on the vm itself only, but it fails on the other two machines: alice@vm ~ $ ssh alice@vm alice@vm's password: Last login: Tue Oct 25 23:42:09 2011 from vm.shunra.net [mark@Quake ~]$ ssh -vvv alice@vm OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to vm [172.30.2.60] port 22. debug1: connect to address 172.30.2.60 port 22: Connection timed out ssh: connect to host vm port 22: Connection timed out bob@Srv ~ $ ssh -vvv alice@vm OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to vm [172.30.2.60] port 22. debug1: connect to address 172.30.2.60 port 22: Connection timed out ssh: connect to host vm port 22: Connection timed out I used ssh-host-config both on vm and srv to configure the ssh to run as a windows service. Besides that I did nothing else. Can anyone help me troubleshoot this issue? Thank you very much. EDIT The virtual machine software is VMWare Workstation 7.1.4. I think the problem is in its settings, but I have no idea where exactly. The Network Adapter is set to Bridged. EDIT2 All the machines are located in the company lab, I think all of them are on the same segment, but I may be wrong. Below is the ipconfig /all output for each machine (skipping the linux server). I have deleted the Tunnel adapters to keep the output minimal. If anyone thinks they matter, do tell so and I will post them as well. In addition ping output is given to show that DNS is correct. Something else, may be relevant, may be not. Doing psexec to srv works OK, whereas to vm failes with Access Denied. srv: C:\Windows\system32>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : srv Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) Physical Address. . . . . . . . . : E4-1F-13-6D-F3-00 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 172.30.6.9(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DNS Servers . . . . . . . . . . . : 172.30.1.1 172.30.1.2 NetBIOS over Tcpip. . . . . . . . : Enabled C:\Windows\system32>ping vm Pinging vm.shunra.net [172.30.2.60] with 32 bytes of data: Reply from 172.30.2.60: bytes=32 time=1ms TTL=128 Reply from 172.30.2.60: bytes=32 time=4ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.2.60: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 4ms, Average = 1ms C:\Windows\system32> vm: C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : vm Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net shunranet Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : shunranet Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter Physical Address. . . . . . . . . : 00-0C-29-8F-A0-0B Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 172.30.2.60 Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DHCP Server . . . . . . . . . . . : 172.30.1.1 DNS Servers . . . . . . . . . . . : 172.30.1.1 172.30.1.2 Lease Obtained. . . . . . . . . . : Tuesday, October 25, 2011 18:16:34 Lease Expires . . . . . . . . . . : Wednesday, November 02, 2011 18:16:34 C:\>ping srv Pinging srv.shunra.net [172.30.6.9] with 32 bytes of data: Reply from 172.30.6.9: bytes=32 time=1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms C:\> vm-host (the host machine of the vm): C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : vm-host Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) Physical Address. . . . . . . . . : 6C-F0-49-E7-E9-30 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f59d:7f6e:1510:6f%10(Preferred) IPv4 Address. . . . . . . . . . . : 172.30.6.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DHCPv6 IAID . . . . . . . . . . . : 242020425 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : 172.30.1.1 194.90.1.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd92:38c0:9a6d:c008%16(Preferred) Autoconfiguration IPv4 Address. . : 169.254.192.8(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352342102 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::edb9:b78c:a504:593b%17(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.5.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 369119318 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled C:\>ping srv Pinging srv.shunra.net [172.30.6.9] with 32 bytes of data: Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>ping vm Pinging vm.shunra.net [172.30.2.60] with 32 bytes of data: Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.2.60: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\> EDIT3 I have just checked - the vm-host is able to ssh to the vm machine! I still do not know how to leverage this discovery to solve the problem.

  Read the article

• Traditional IO vs memory-mapped

  - by Senne

  I'm trying to illustrate the difference in performance between traditional IO and memory mapped files in java to students. I found an example somewhere on internet but not everything is clear to me, I don't even think all steps are nececery. I read a lot about it here and there but I'm not convinced about a correct implementation of neither of them. The code I try to understand is: public class FileCopy{ public static void main(String args[]){ if (args.length < 1){ System.out.println(" Wrong usage!"); System.out.println(" Correct usage is : java FileCopy <large file with full path>"); System.exit(0); } String inFileName = args[0]; File inFile = new File(inFileName); if (inFile.exists() != true){ System.out.println(inFileName + " does not exist!"); System.exit(0); } try{ new FileCopy().memoryMappedCopy(inFileName, inFileName+".new" ); new FileCopy().customBufferedCopy(inFileName, inFileName+".new1"); }catch(FileNotFoundException fne){ fne.printStackTrace(); }catch(IOException ioe){ ioe.printStackTrace(); }catch (Exception e){ e.printStackTrace(); } } public void memoryMappedCopy(String fromFile, String toFile ) throws Exception{ long timeIn = new Date().getTime(); // read input file RandomAccessFile rafIn = new RandomAccessFile(fromFile, "rw"); FileChannel fcIn = rafIn.getChannel(); ByteBuffer byteBuffIn = fcIn.map(FileChannel.MapMode.READ_WRITE, 0,(int) fcIn.size()); fcIn.read(byteBuffIn); byteBuffIn.flip(); RandomAccessFile rafOut = new RandomAccessFile(toFile, "rw"); FileChannel fcOut = rafOut.getChannel(); ByteBuffer writeMap = fcOut.map(FileChannel.MapMode.READ_WRITE,0,(int) fcIn.size()); writeMap.put(byteBuffIn); long timeOut = new Date().getTime(); System.out.println("Memory mapped copy Time for a file of size :" + (int) fcIn.size() +" is "+(timeOut-timeIn)); fcOut.close(); fcIn.close(); } static final int CHUNK_SIZE = 100000; static final char[] inChars = new char[CHUNK_SIZE]; public static void customBufferedCopy(String fromFile, String toFile) throws IOException{ long timeIn = new Date().getTime(); Reader in = new FileReader(fromFile); Writer out = new FileWriter(toFile); while (true) { synchronized (inChars) { int amountRead = in.read(inChars); if (amountRead == -1) { break; } out.write(inChars, 0, amountRead); } } long timeOut = new Date().getTime(); System.out.println("Custom buffered copy Time for a file of size :" + (int) new File(fromFile).length() +" is "+(timeOut-timeIn)); in.close(); out.close(); } } When exactly is it nececary to use RandomAccessFile? Here it is used to read and write in the memoryMappedCopy, is it actually nececary just to copy a file at all? Or is it a part of memorry mapping? In customBufferedCopy, why is synchronized used here? I also found a different example that -should- test the performance between the 2: public class MappedIO { private static int numOfInts = 4000000; private static int numOfUbuffInts = 200000; private abstract static class Tester { private String name; public Tester(String name) { this.name = name; } public long runTest() { System.out.print(name + ": "); try { long startTime = System.currentTimeMillis(); test(); long endTime = System.currentTimeMillis(); return (endTime - startTime); } catch (IOException e) { throw new RuntimeException(e); } } public abstract void test() throws IOException; } private static Tester[] tests = { new Tester("Stream Write") { public void test() throws IOException { DataOutputStream dos = new DataOutputStream( new BufferedOutputStream( new FileOutputStream(new File("temp.tmp")))); for(int i = 0; i < numOfInts; i++) dos.writeInt(i); dos.close(); } }, new Tester("Mapped Write") { public void test() throws IOException { FileChannel fc = new RandomAccessFile("temp.tmp", "rw") .getChannel(); IntBuffer ib = fc.map( FileChannel.MapMode.READ_WRITE, 0, fc.size()) .asIntBuffer(); for(int i = 0; i < numOfInts; i++) ib.put(i); fc.close(); } }, new Tester("Stream Read") { public void test() throws IOException { DataInputStream dis = new DataInputStream( new BufferedInputStream( new FileInputStream("temp.tmp"))); for(int i = 0; i < numOfInts; i++) dis.readInt(); dis.close(); } }, new Tester("Mapped Read") { public void test() throws IOException { FileChannel fc = new FileInputStream( new File("temp.tmp")).getChannel(); IntBuffer ib = fc.map( FileChannel.MapMode.READ_ONLY, 0, fc.size()) .asIntBuffer(); while(ib.hasRemaining()) ib.get(); fc.close(); } }, new Tester("Stream Read/Write") { public void test() throws IOException { RandomAccessFile raf = new RandomAccessFile( new File("temp.tmp"), "rw"); raf.writeInt(1); for(int i = 0; i < numOfUbuffInts; i++) { raf.seek(raf.length() - 4); raf.writeInt(raf.readInt()); } raf.close(); } }, new Tester("Mapped Read/Write") { public void test() throws IOException { FileChannel fc = new RandomAccessFile( new File("temp.tmp"), "rw").getChannel(); IntBuffer ib = fc.map( FileChannel.MapMode.READ_WRITE, 0, fc.size()) .asIntBuffer(); ib.put(0); for(int i = 1; i < numOfUbuffInts; i++) ib.put(ib.get(i - 1)); fc.close(); } } }; public static void main(String[] args) { for(int i = 0; i < tests.length; i++) System.out.println(tests[i].runTest()); } } I more or less see whats going on, my output looks like this: Stream Write: 653 Mapped Write: 51 Stream Read: 651 Mapped Read: 40 Stream Read/Write: 14481 Mapped Read/Write: 6 What is makeing the Stream Read/Write so unbelievably long? And as a read/write test, to me it looks a bit pointless to read the same integer over and over (if I understand well what's going on in the Stream Read/Write) Wouldn't it be better to read int's from the previously written file and just read and write ints on the same place? Is there a better way to illustrate it? I've been breaking my head about a lot of these things for a while and I just can't get the whole picture..

  Read the article

• Trying to randomise a jQuery content slider

  - by alecrust

  Hi everyone, I'm using a very nice jQuery content slider called Easy Slider on my site that I downloaded from Css Globe. The script is excellent and does just what I want - except I can't make it randomise the list, it always scrolls from left to right or right to left! I'm far from good with JavaScript, so my attempts at solving this have been feeble. Although I'm sure it must be an easy fix! If anyone wouldn't mind taking a glance over the script to see if they can spot what I need to change to make it random it would be greatly appreciated! I've tried contacting the original plugin developer but have had no response yet. The comments on the Easy Slider page didn't bear much fruit either unfortunately. I've pasted the script I'm using on my site below: /* * Easy Slider 1.7 - jQuery plugin * written by Alen Grakalic * http://cssglobe.com/post/4004/easy-slider-15-the-easiest-jquery-plugin-for-sliding * * Copyright (c) 2009 Alen Grakalic (http://cssglobe.com) * Dual licensed under the MIT (MIT-LICENSE.txt) * and GPL (GPL-LICENSE.txt) licenses. * * Built for jQuery library * http://jquery.com * */ (function($) { $.fn.easySlider = function(options){ // default configuration properties var defaults = { prevId: 'prevBtn', prevText: 'Previous', nextId: 'nextBtn', nextText: 'Next', controlsShow: true, controlsBefore: '', controlsAfter: '', controlsFade: true, firstId: 'firstBtn', firstText: 'First', firstShow: false, lastId: 'lastBtn', lastText: 'Last', lastShow: false, vertical: false, speed: 800, auto: false, pause: 7000, continuous: false, numeric: false, numericId: 'controls' }; var options = $.extend(defaults, options); this.each(function() { var obj = $(this); var s = $("li", obj).length; var w = $("li", obj).width(); var h = $("li", obj).height(); var clickable = true; obj.width(w); obj.height(h); obj.css("overflow","hidden"); var ts = s-1; var t = 0; $("ul", obj).css('width',s*w); if(options.continuous){ $("ul", obj).prepend($("ul li:last-child", obj).clone().css("margin-left","-"+ w +"px")); $("ul", obj).append($("ul li:nth-child(2)", obj).clone()); $("ul", obj).css('width',(s+1)*w); }; if(!options.vertical) $("li", obj).css('float','left'); if(options.controlsShow){ var html = options.controlsBefore; if(options.numeric){ html += '<ol id="'+ options.numericId +'"></ol>'; } else { if(options.firstShow) html += '<span id="'+ options.firstId +'"><a href=\"javascript:void(0);\">'+ options.firstText +'</a></span>'; html += ' <span id="'+ options.prevId +'"><a href=\"javascript:void(0);\">'+ options.prevText +'</a></span>'; html += ' <span id="'+ options.nextId +'"><a href=\"javascript:void(0);\">'+ options.nextText +'</a></span>'; if(options.lastShow) html += ' <span id="'+ options.lastId +'"><a href=\"javascript:void(0);\">'+ options.lastText +'</a></span>'; }; html += options.controlsAfter; $(obj).after(html); }; if(options.numeric){ for(var i=0;i<s;i++){ $(document.createElement("li")) .attr('id',options.numericId + (i+1)) .html('<a rel='+ i +' href=\"javascript:void(0);\">'+ (i+1) +'</a>') .appendTo($("#"+ options.numericId)) .click(function(){ animate($("a",$(this)).attr('rel'),true); }); }; } else { $("a","#"+options.nextId).click(function(){ animate("next",true); }); $("a","#"+options.prevId).click(function(){ animate("prev",true); }); $("a","#"+options.firstId).click(function(){ animate("first",true); }); $("a","#"+options.lastId).click(function(){ animate("last",true); }); }; function setCurrent(i){ i = parseInt(i)+1; $("li", "#" + options.numericId).removeClass("current"); $("li#" + options.numericId + i).addClass("current"); }; function adjust(){ if(t>ts) t=0; if(t<0) t=ts; if(!options.vertical) { $("ul",obj).css("margin-left",(t*w*-1)); } else { $("ul",obj).css("margin-left",(t*h*-1)); } clickable = true; if(options.numeric) setCurrent(t); }; function animate(dir,clicked){ if (clickable){ clickable = false; var ot = t; switch(dir){ case "next": t = (ot>=ts) ? (options.continuous ? t+1 : ts) : t+1; break; case "prev": t = (t<=0) ? (options.continuous ? t-1 : 0) : t-1; break; case "first": t = 0; break; case "last": t = ts; break; default: t = dir; break; }; var diff = Math.abs(ot-t); var speed = diff*options.speed; if(!options.vertical) { p = (t*w*-1); $("ul",obj).animate( { marginLeft: p }, { queue:false, duration:speed, complete:adjust } ); } else { p = (t*h*-1); $("ul",obj).animate( { marginTop: p }, { queue:false, duration:speed, complete:adjust } ); }; if(!options.continuous && options.controlsFade){ if(t==ts){ $("a","#"+options.nextId).hide(); $("a","#"+options.lastId).hide(); } else { $("a","#"+options.nextId).show(); $("a","#"+options.lastId).show(); }; if(t==0){ $("a","#"+options.prevId).hide(); $("a","#"+options.firstId).hide(); } else { $("a","#"+options.prevId).show(); $("a","#"+options.firstId).show(); }; }; if(clicked) clearTimeout(timeout); if(options.auto && dir=="next" && !clicked){; timeout = setTimeout(function(){ animate("next",false); },diff*options.speed+options.pause); }; }; }; // init var timeout; if(options.auto){; timeout = setTimeout(function(){ animate("next",false); },options.pause); }; if(options.numeric) setCurrent(0); if(!options.continuous && options.controlsFade){ $("a","#"+options.prevId).hide(); $("a","#"+options.firstId).hide(); }; }); }; })(jQuery); Many thanks again! Alec

  Read the article

• interactive login on cgi script

  - by raindrop18

  I am new for perl-cgi script. and my objective is to create user/pass interactive script to log and get information from multiple device at once. instead of add the user/pass credential on the script itself. since i am new if some one show me how to write the interactive part of the script. thanks much!!! here is the current code usr/local/bin/perl -wl use CGI ':standard'; use Net::Telnet::Cisco; ### set the error fields to nulls $selerror = ""; ### Input from the screen - make sure data was input if (param() and param('Switches') ne "" and (param('Mac') ne "" or param('Interface Description') ne "" or param('VLAN') ne "" )) { ### Put the input devices into an array. @devices = param('Switches'); ### format the header data print header(); print start_html(-title=>"ShowSwitches",-BGCOLOR=>'aqua'); print "\n",h1("<CENTER>Show Switches</CENTER>"); print "\n",hr(),"\n"; ### Go thru the device array. foreach(@devices) { $error_msg = ""; $TAC_login_error = ""; $open_error = ""; $retry_open_error = ""; $prompt_error = ""; $password_error = ""; ### Take input host and use to send to Telnet $host = $_; $session = Net::Telnet::Cisco->new(Errmode => 'return', Timeout => 30); ### Connect to the host $session->open(Host =>"$host", Timeout => 15); $open_error = $session->errmsg; ### Login with TACACS if host can be connected to if ($open_error eq "") { $session->login('USER', 'PASS'); $TAC_login_error = $session->errmsg; ### Login with TACACS failed - try standard login if ($TAC_login_error ne "") { ### Connect to host $session->open(Host =>"$host", Timeout => 15); $retry_open_error = $session->errmsg; ### Wait for password prompt - multiple matches - devices may have different device prompts. if ($retry_open_error eq "") { $session->waitfor(Match => '/Password:.*$/', Match => '/Enter password:.*$/', Timeout => 20); $prompt_error = $session->errmsg; if ($prompt_error eq "") { ### Input password $session->print('getmeout'); $password_error = $session->errmsg; $session->waitfor('/.*>$/'); $password_error = $session->errmsg; } } } } ### No errors, then issue "show commands". if ($open_error eq "" and ($TAC_login_error eq "" or $retry_open_error eq "") and $prompt_error eq "" and $password_error eq "") { ### Show Mac if (param('Mac')) { $cmd = 'sh mac'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } ### Show Interface Description if (param('Interface Description')) { $cmd = 'sh interface description'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } ### Show VLAN if (param('VLAN')) { $cmd = 'sh vlan'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show vlan - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } } elsif ($TAC_login_error ne "" and $password_error ne "") { $error_msg = "Error - $host " . $TAC_login_error . ' - possible incorrect TACACS or standard password parameters on device.'; } elsif ($open_error ne "") { $error_msg = "Error - $host " . $open_error . ' - cannot connect to host - is it down??'; } elsif ($prompt_error ne "") { $error_msg = "Error - $host " . $prompt_error . ' - password prompt not recognized - invalid TACACS (or user) password.'; } elsif ($password_error ne "") { $error_msg = "Error - $host " . $password_error . ' - possible incorrect user/password parameters on device.'; } if ($error_msg ne "" ) { print b($error_msg),(br); print hr(),"\n"; } print hr(),"\n"; print end_html(),"\n"; } } else { ### No Show command was selected. if (param('Submit') and param('Mac') eq "" and param('Interface Description') eq "" and param('VLAN') eq "" ) { $selerror = 'No Show Displays were selected. Try again please!!'; } elsif ### No switch was selected. (param('Submit') and param('Switches') eq "") { $selerror = 'No devices were selected. Try again please!!'; } ### This formats the initial Show Web page. print header(-Pragma='no-cache'), start_html(-title=>"Show Displays",-BGCOLOR=>'aqua'), h1("<CENTER>Show Switches</CENTER>"),hr(), start_form(), b("Select Show Commands:"), br(), br(), checkbox(-name=>'Mac'), checkbox(-name=>'Interface Description'), checkbox(-name=>'VLAN'), br(),br(),hr(),br(), b("Select One or More Devices:"), br(), br(), scrolling_list (-name => 'Switches', -default=> "NONE", -values => ['cs6a', 'cs7a', 'cs7b', 'cs8b', 'cs9a', 'c9b', 'csa' ], -multiple => 'true', -size => 7, ), p(submit('Submit'),reset('Reset')), b($selerror), end_form(),hr(), end_html(); } #

  Read the article

• interactive login on perl cgi script- updated question [closed]

  - by raindrop18

  I am new for perl-cgi script. and my objective is to create user/pass interactive script to log and get information from multiple device at once. instead of add the user/pass credential on the script itself. since i am new if some one show me how to write the interactive part of the script. thanks much!!! here is the current code usr/local/bin/perl -wl use CGI ':standard'; use Net::Telnet::Cisco; # ### set the error fields to nulls $selerror = ""; # ### Input from the screen - make sure data was input if (param() and param('Switches') ne "" and (param('Mac') ne "" or param('Interface Description') ne "" or param('VLAN') ne "" )) { # ### Put the input devices into an array. @devices = param('Switches'); # ### format the header data print header(); print start_html(-title=>"ShowSwitches",-BGCOLOR=>'aqua'); print "\n",h1("<CENTER>Show Switches</CENTER>"); print "\n",hr(),"\n"; # ### Go thru the device array. foreach(@devices) { $error_msg = ""; $TAC_login_error = ""; $open_error = ""; $retry_open_error = ""; $prompt_error = ""; $password_error = ""; # ### Take input host and use to send to Telnet $host = $_; $session = Net::Telnet::Cisco->new(Errmode => 'return', Timeout => 30); # ### Connect to the host $session->open(Host =>"$host", Timeout => 15); $open_error = $session->errmsg; # ### Login with TACACS if host can be connected to if ($open_error eq "") { $session->login('USER', 'PASS'); $TAC_login_error = $session->errmsg; # ### Login with TACACS failed - try standard login if ($TAC_login_error ne "") { # ### Connect to host $session->open(Host =>"$host", Timeout => 15); $retry_open_error = $session->errmsg; # ### Wait for password prompt - multiple matches - devices may have different device prompts. if ($retry_open_error eq "") { $session->waitfor(Match => '/Password:.*$/', Match => '/Enter password:.*$/', Timeout => 20); $prompt_error = $session->errmsg; if ($prompt_error eq "") { # ### Input password $session->print('getmeout'); $password_error = $session->errmsg; $session->waitfor('/.*>$/'); $password_error = $session->errmsg; } } } } # ### No errors, then issue "show commands". if ($open_error eq "" and ($TAC_login_error eq "" or $retry_open_error eq "") and $prompt_error eq "" and $password_error eq "") { # ### Show Mac if (param('Mac')) { $cmd = 'sh mac'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } # ### Show Interface Description if (param('Interface Description')) { $cmd = 'sh interface description'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } # ### Show VLAN if (param('VLAN')) { $cmd = 'sh vlan'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show vlan - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } } elsif ($TAC_login_error ne "" and $password_error ne "") { $error_msg = "Error - $host " . $TAC_login_error . ' - possible incorrect TACACS or standard password parameters on device.'; } elsif ($open_error ne "") { $error_msg = "Error - $host " . $open_error . ' - cannot connect to host - is it down??'; } elsif ($prompt_error ne "") { $error_msg = "Error - $host " . $prompt_error . ' - password prompt not recognized - invalid TACACS (or user) password.'; } elsif ($password_error ne "") { $error_msg = "Error - $host " . $password_error . ' - possible incorrect user/password parameters on device.'; } if ($error_msg ne "" ) { print b($error_msg),(br); print hr(),"\n"; } print hr(),"\n"; print end_html(),"\n"; } } else { # ### No Show command was selected. if (param('Submit') and param('Mac') eq "" and param('Interface Description') eq "" and param('VLAN') eq "" ) { $selerror = 'No Show Displays were selected. Try again please!!'; } elsif # ### No switch was selected. (param('Submit') and param('Switches') eq "") { $selerror = 'No devices were selected. Try again please!!'; } # ### This formats the initial Show Web page. print header(-Pragma=>'no-cache'), start_html(-title=>"Show Displays",-BGCOLOR=>'aqua'), h1("<CENTER>Show Switches</CENTER>"),hr(), start_form(), b("Select Show Commands:"), br(), br(), checkbox(-name=>'Mac'), checkbox(-name=>'Interface Description'), checkbox(-name=>'VLAN'), br(),br(),hr(),br(), b("Select One or More Devices:"), br(), br(), scrolling_list (-name => 'Switches', -default=> "NONE", -values => ['cs6a', 'cs7a', 'cs7b', 'cs8b', 'cs9a', 'c9b', 'csa' ], -multiple => 'true', -size => 7, ), p(submit('Submit'),reset('Reset')), b($selerror), end_form(),hr(), end_html(); } #

  Read the article

• How to make sure that grub does use menu.lst?

  - by Glen S. Dalton

  On my Ubuntu 9.04 ("Karmic") laptop I suspect grub does not use the /boot/grub/menu.lst file. What happens on boot is that I see a blank screen and nothing happens. When I press ESC I see a boot list which is different from what I would expect from the menu.lst file. The menu lines are different and when I choose the first entry it does not use the kernel options that are in the first entry in menu.lst. Where do the entries that grub uses come from? How can I find out what happens, is there a log? I could not find anything in /var/log/syslog or /var/log/dmesg about grub using a menu.lst. How can I set it to work like expected? Some Files: $ sudo ls -la /boot/grub/*lst -rw-r--r-- 1 root root 1558 2009-12-12 15:25 /boot/grub/command.lst -rw-r--r-- 1 root root 121 2009-12-12 15:25 /boot/grub/fs.lst -rw-r--r-- 1 root root 272 2009-12-12 15:25 /boot/grub/handler.lst -rw-r--r-- 1 root root 4576 2010-03-19 11:26 /boot/grub/menu.lst -rw-r--r-- 1 root root 1657 2009-12-12 15:25 /boot/grub/moddep.lst -rw-r--r-- 1 root root 62 2009-12-12 15:25 /boot/grub/partmap.lst -rw-r--r-- 1 root root 22 2009-12-12 15:25 /boot/grub/parttool.lst $ sudo ls -la /vm* lrwxrwxrwx 1 root root 30 2009-12-12 16:15 /vmlinuz -> boot/vmlinuz-2.6.31-16-generic lrwxrwxrwx 1 root root 30 2009-12-12 14:07 /vmlinuz.old -> boot/vmlinuz-2.6.31-14-generic $ sudo ls -la /init* lrwxrwxrwx 1 root root 33 2009-12-12 16:15 /initrd.img -> boot/initrd.img-2.6.31-16-generic lrwxrwxrwx 1 root root 33 2009-12-12 14:07 /initrd.img.old -> boot/initrd.img-2.6.31-14-generic The only menu.lst that I found: $ sudo find / -name "menu.lst" /boot/grub/menu.lst $ sudo cat /boot/grub/menu.lst # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) #hiddenmenu # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro noresume ## default grub root device ## e.g. groot=(hd0,0) # groot=70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 ## defoptions=quiet splash # defoptions=apm=on acpi=off ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 9.10, kernel 2.6.31-14-generic noresume uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro quiet splash apm=on acpi=off noresume initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, kernel 2.6.31-14-generic (recovery mode) uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro sing le initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, memtest86+ uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST These are the choices that grub displays after i press ESC: Ubuntu, Linux 2-6-31-16-generic Ubuntu, Linux 2-6-31-16-generic (recovery mode) Ubuntu, Linux 2-6-31-14-generic Ubuntu, Linux 2-6-31-14-generic (recovery mode) Memory test (memtest86+) Memory test (memtest86+, serial console 115200)

  Read the article

• CISCO 2911 Router configuration

  - by bala

  Device cisco 2911 router configuration support is required please. I have exchange server 2010 configured and working without any errors the problem is in cisco router configuration when exchange server sends emails out the receives WAN IP not the public ip. I have configured RDNS lookups with our MX record IP addesses that match the FQDN but all our emails are rejected because it does not match with the public ip. Receiving mails problem is not an problem all mails are coming through. i am sure i am missing something on the router configuration that does not sends the public ip, can any one help me to solve this issue. Note; I've got 1 WAN IP & 8 Public IP from ISP . Find below the running configuration. Building configuration... Current configuration : 2734 bytes ! ! Last configuration change at 06:32:13 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BSBG-LL ! boot-start-marker boot-end-marker ! ! enable secret 5 $x$xHrxxxxx5ox0 enable password 7 xx23xx5FxxE1xx044 ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! ip flow-cache timeout active 1 ip domain name yourdomain.com ip name-server 213.42.20.20 ip name-server 195.229.241.222 multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 ! ! username bsbg ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.9 255.255.255.0 ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed 100 no cdp enable ! interface GigabitEthernet0/1 ip address 213.42.xx.x2 255.255.255.252 ip nat outside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 120 interface GigabitEthernet0/1 overload ip nat inside source static tcp 192.168.0.4 25 94.56.89.100 25 extendable ip nat inside source static tcp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static udp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static tcp 192.168.0.4 110 94.56.89.100 110 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.100 443 extendable ip nat inside source static tcp 192.168.0.4 587 94.56.89.100 587 extendable ip nat inside source static tcp 192.168.0.4 995 94.56.89.100 995 extendable ip nat inside source static tcp 192.168.0.4 3389 94.56.89.100 3389 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.101 443 extendable ip nat inside source static tcp 192.168.0.12 80 94.56.89.102 80 extendable ip nat inside source static tcp 192.168.0.12 443 94.56.89.102 443 extendable ip nat inside source static tcp 192.168.0.12 3389 94.56.89.102 3389 extendable ip route 0.0.0.0 0.0.0.0 213.42.69.41 ! access-list 120 permit ip 192.168.0.0 0.0.0.255 any ! ! ! control-plane ! ! ! line con 0 exec-timeout 5 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password 7 xx64xxD530D26086Dxx login transport input all ! scheduler allocate 20000 1000 end

  Read the article

• How to use CLEAR USB internet connection in Ubuntu (host) and WindowsXP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for linux as yet. I've installed windowsxp as guest in ubuntu and the version I'm using is 3.2.2. USB is connecting fine in WindowsXP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

• Bridging LXC containers to host eth0 so they can have a public IP

  - by Vianney Stroebel

  UPDATE: I found the solution there: http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge#No_traffic_gets_trough_.28except_ARP_and_STP.29 # cd /proc/sys/net/bridge # ls bridge-nf-call-arptables bridge-nf-call-iptables bridge-nf-call-ip6tables bridge-nf-filter-vlan-tagged # for f in bridge-nf-*; do echo 0 $f; done But I'd like to have expert opinions on this: is it safe to disable all bridge-nf-*? What are they here for? END OF UPDATE I need to bridge LXC containers to the physical interface (eth0) of my host, reading numerous tutorials, documents and blog posts on the subject. I need the containers to have their own public IP (which I've previously done KVM/libvirt). After two days of searching and trying, I still can't make it work with LXC containers. The host runs a freshly installed Ubuntu Server Quantal (12.10) with only libvirt (which I'm not using here) and lxc installed. I created the containers with : lxc-create -t ubuntu -n mycontainer So they also run Ubuntu 12.10. Content of /var/lib/lxc/mycontainer/config is: lxc.utsname = mycontainer lxc.mount = /var/lib/lxc/test/fstab lxc.rootfs = /var/lib/lxc/test/rootfs lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethmycontainer lxc.network.ipv4 = 179.43.46.233 lxc.network.hwaddr= 02:00:00:86:5b:11 lxc.devttydir = lxc lxc.tty = 4 lxc.pts = 1024 lxc.arch = amd64 lxc.cap.drop = sys_module mac_admin mac_override lxc.pivotdir = lxc_putold # uncomment the next line to run the container unconfined: #lxc.aa_profile = unconfined lxc.cgroup.devices.deny = a # Allow any mknod (but not using the node) lxc.cgroup.devices.allow = c *:* m lxc.cgroup.devices.allow = b *:* m # /dev/null and zero lxc.cgroup.devices.allow = c 1:3 rwm lxc.cgroup.devices.allow = c 1:5 rwm # consoles lxc.cgroup.devices.allow = c 5:1 rwm lxc.cgroup.devices.allow = c 5:0 rwm #lxc.cgroup.devices.allow = c 4:0 rwm #lxc.cgroup.devices.allow = c 4:1 rwm # /dev/{,u}random lxc.cgroup.devices.allow = c 1:9 rwm lxc.cgroup.devices.allow = c 1:8 rwm lxc.cgroup.devices.allow = c 136:* rwm lxc.cgroup.devices.allow = c 5:2 rwm # rtc lxc.cgroup.devices.allow = c 254:0 rwm #fuse lxc.cgroup.devices.allow = c 10:229 rwm #tun lxc.cgroup.devices.allow = c 10:200 rwm #full lxc.cgroup.devices.allow = c 1:7 rwm #hpet lxc.cgroup.devices.allow = c 10:228 rwm #kvm lxc.cgroup.devices.allow = c 10:232 rwm Then I changed my host /etc/network/interfaces to: auto lo iface lo inet loopback auto br0 iface br0 inet static bridge_ports eth0 bridge_fd 0 address 92.281.86.226 netmask 255.255.255.0 network 92.281.86.0 broadcast 92.281.86.255 gateway 92.281.86.254 dns-nameservers 213.186.33.99 dns-search ovh.net When I try command line configuration ("brctl addif", "ifconfig eth0", etc.) my remote host becomes inaccessible and I have to hard reboot it. I changed the content of /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces to: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 179.43.46.233 netmask 255.255.255.255 broadcast 178.33.40.233 gateway 92.281.86.254 It takes several minutes for mycontainer to start (lxc-start -n mycontainer). I tried replacing gateway 92.281.86.254 by : post-up route add 92.281.86.254 dev eth0 post-up route add default gw 92.281.86.254 post-down route del 92.281.86.254 dev eth0 post-down route del default gw 92.281.86.254 My container then starts instantly. But whatever configuration I set in /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces, I cannot ping from mycontainer to any IP (including the host's) : ubuntu@mycontainer:~$ ping 92.281.86.226 PING 92.281.86.226 (92.281.86.226) 56(84) bytes of data. ^C --- 92.281.86.226 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5031ms And my host cannot ping the container: root@host:~# ping 179.43.46.233 PING 179.43.46.233 (179.43.46.233) 56(84) bytes of data. ^C --- 179.43.46.233 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms My container's ifconfig: ubuntu@mycontainer:~$ ifconfig eth0 Link encap:Ethernet HWaddr 02:00:00:86:5b:11 inet addr:179.43.46.233 Bcast:255.255.255.255 Mask:0.0.0.0 inet6 addr: fe80::ff:fe79:5a31/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:6 overruns:0 frame:0 TX packets:54 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4070 (4.0 KB) TX bytes:4168 (4.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2496 (2.4 KB) TX bytes:2496 (2.4 KB) My host's ifconfig: root@host:~# ifconfig br0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b inet addr:92.281.86.226 Bcast:91.121.67.255 Mask:255.255.255.0 inet6 addr: fe80::4e72:b9ff:fe43:652b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1453 errors:0 dropped:18 overruns:0 frame:0 TX packets:1630 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145125 (145.1 KB) TX bytes:299943 (299.9 KB) eth0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3178 errors:0 dropped:0 overruns:0 frame:0 TX packets:1637 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:298263 (298.2 KB) TX bytes:309167 (309.1 KB) Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:300 (300.0 B) TX bytes:300 (300.0 B) vethtest Link encap:Ethernet HWaddr fe:0d:7f:3e:70:88 inet6 addr: fe80::fc0d:7fff:fe3e:7088/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4168 (4.1 KB) TX bytes:4250 (4.2 KB) virbr0 Link encap:Ethernet HWaddr de:49:c5:66:cf:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) I have disabled lxcbr0 (USE_LXC_BRIDGE="false" in /etc/default/lxc). root@host:~# brctl show bridge name bridge id STP enabled interfaces br0 8000.4c72b943652b no eth0 vethtest I have configured the IP 179.43.46.233 to point to 02:00:00:86:5b:11 in my hosting provider (OVH) config panel. (The IPs in this post are not the real ones.) Thanks for reading this long question! :-) Vianney

  Read the article

• How to use CLEAR USB WiMax in Ubuntu (host) and Windows XP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for Linux as yet. I've installed Windows XP as guest in Ubuntu and the version I'm using is 3.2.2. USB is connecting fine in Windows XP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

• Citrix Xen VM's lose networking

  - by Ash

  My client has a XenServer 6.0.2 installation with 2 Window Server 2008 R2 virtual machines. Whenever the virtual machines are rebooted they lose their IP settings (IP address, subnet, gateway). Each time after a reboot I need to login to each VM via XenCenter and re-apply the required static IP settings. This causes issues with connected iSCSI drives within each VM - drives need to be reconnected after each reboot. For example, a network adapter has the following settings pre-reboot: Description . . . . . . . . . . . : Citrix PV Ethernet Adapter #0 Physical Address. . . . . . . . . : C6-FB-A2-4F-2C-F3 IPv4 Address. . . . . . . . . . . : 10.101.0.101(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.101.0.10 DNS Servers . . . . . . . . . . . : 10.101.0.100 NetBIOS over Tcpip. . . . . . . . : Enabled Post-reboot: Description . . . . . . . . . . . : Citrix PV Ethernet Adapter #0 Physical Address. . . . . . . . . : C6-FB-A2-4F-2C-F3 Autoconfiguration IPv4 Address. . : 169.254.153.174(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 10.101.0.100 NetBIOS over Tcpip. . . . . . . . : Enabled Under XenCenter -- Virtual Network Interfaces, each adapter is set to a static MAC address (i.e. "Use this MAC address"). I have tried the following commands within one VM but this had no effect: netsh winsock reset catalog netsh int ip reset Can someone please help?

  Read the article

• How to mount a blu-ray drive?

  - by Stephan Schielke

  Maybe it is for the best to close this question. This has nothing to do with a bluray drive in general anymore. Probably a hardware defect. I will try to test it with a windows system and different cables again... Thx so far. I have a bluray/dvd/cdrom drive with SATA. Ubuntu wont find it under /dev/sd wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg2' rwrw-- : 'HL-DT-ST' 'BDDVDRW CH08LS10' ------------------------------------------------------------------------- cdrecord -scanbus scsibus2: 2,0,0 200) 'HL-DT-ST' 'BDDVDRW CH08LS10' '2.00' Removable CD-ROM fdisk dont even lists it. Ubuntu only automounts blank DVDs, but neither CDROM nor Blurays. I also changed the sata slot, sata cable and the power cable. The drive works with a windows system. This happens when I try to mount: sudo mount -t auto /dev/scd0 /media/bluray mount: you must specify the filesystem type I tried all filesystems there are. I also installed makemkv. It finds the drive but not the disc. Here is my /dev ls -al /dev total 12 drwxr-xr-x 17 root root 4420 2011-11-25 19:36 . drwxr-xr-x 28 root root 4096 2011-11-25 07:12 .. crw------- 1 root root 10, 235 2011-11-25 19:28 autofs -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab.old drwxr-xr-x 2 root root 700 2011-11-25 19:27 block drwxr-xr-x 2 root root 100 2011-11-25 19:27 bsg crw------- 1 root root 10, 234 2011-11-25 19:28 btrfs-control drwxr-xr-x 3 root root 60 2011-11-25 19:27 bus drwxr-xr-x 2 root root 3820 2011-11-25 19:28 char crw------- 1 root root 5, 1 2011-11-25 19:28 console lrwxrwxrwx 1 root root 11 2011-11-25 19:28 core -> /proc/kcore drwxr-xr-x 2 root root 60 2011-11-25 19:28 cpu crw------- 1 root root 10, 60 2011-11-25 19:28 cpu_dma_latency drwxr-xr-x 7 root root 140 2011-11-25 19:27 disk crw------- 1 root root 10, 61 2011-11-25 19:28 ecryptfs crw-rw---- 1 root video 29, 0 2011-11-25 19:28 fb0 lrwxrwxrwx 1 root root 13 2011-11-25 19:28 fd -> /proc/self/fd crw-rw-rw- 1 root root 1, 7 2011-11-25 19:28 full crw-rw-rw- 1 root fuse 10, 229 2011-11-25 19:28 fuse crw------- 1 root root 251, 0 2011-11-25 19:28 hidraw0 crw------- 1 root root 251, 1 2011-11-25 19:28 hidraw1 crw------- 1 root root 10, 228 2011-11-25 19:28 hpet lrwxrwxrwx 1 root root 14 2011-11-25 19:27 .initramfs -> /run/initramfs drwxr-xr-x 4 root root 220 2011-11-25 19:28 input crw------- 1 root root 1, 11 2011-11-25 19:28 kmsg srw-rw-rw- 1 root root 0 2011-11-25 19:28 log brw-rw---- 1 root disk 7, 0 2011-11-25 19:28 loop0 brw-rw---- 1 root disk 7, 1 2011-11-25 19:28 loop1 brw-rw---- 1 root disk 7, 2 2011-11-25 19:28 loop2 brw-rw---- 1 root disk 7, 3 2011-11-25 19:28 loop3 brw-rw---- 1 root disk 7, 4 2011-11-25 19:28 loop4 brw-rw---- 1 root disk 7, 5 2011-11-25 19:28 loop5 brw-rw---- 1 root disk 7, 6 2011-11-25 19:28 loop6 brw-rw---- 1 root disk 7, 7 2011-11-25 19:28 loop7 drwxr-xr-x 2 root root 60 2011-11-25 19:27 mapper crw------- 1 root root 10, 227 2011-11-25 19:28 mcelog crw-r----- 1 root kmem 1, 1 2011-11-25 19:28 mem drwxr-xr-x 2 root root 60 2011-11-25 19:27 net crw------- 1 root root 10, 59 2011-11-25 19:28 network_latency crw------- 1 root root 10, 58 2011-11-25 19:28 network_throughput crw-rw-rw- 1 root root 1, 3 2011-11-25 19:28 null crw-rw-rw- 1 root root 195, 0 2011-11-25 19:28 nvidia0 crw-rw-rw- 1 root root 195, 255 2011-11-25 19:28 nvidiactl crw------- 1 root root 1, 12 2011-11-25 19:28 oldmem crw-r----- 1 root kmem 1, 4 2011-11-25 19:28 port crw------- 1 root root 108, 0 2011-11-25 19:28 ppp crw------- 1 root root 10, 1 2011-11-25 19:28 psaux crw-rw-rw- 1 root tty 5, 2 2011-11-25 20:00 ptmx drwxr-xr-x 2 root root 0 2011-11-25 19:27 pts brw-rw---- 1 root disk 1, 0 2011-11-25 19:28 ram0 brw-rw---- 1 root disk 1, 1 2011-11-25 19:28 ram1 brw-rw---- 1 root disk 1, 10 2011-11-25 19:28 ram10 brw-rw---- 1 root disk 1, 11 2011-11-25 19:28 ram11 brw-rw---- 1 root disk 1, 12 2011-11-25 19:28 ram12 brw-rw---- 1 root disk 1, 13 2011-11-25 19:28 ram13 brw-rw---- 1 root disk 1, 14 2011-11-25 19:28 ram14 brw-rw---- 1 root disk 1, 15 2011-11-25 19:28 ram15 brw-rw---- 1 root disk 1, 2 2011-11-25 19:28 ram2 brw-rw---- 1 root disk 1, 3 2011-11-25 19:28 ram3 brw-rw---- 1 root disk 1, 4 2011-11-25 19:28 ram4 brw-rw---- 1 root disk 1, 5 2011-11-25 19:28 ram5 brw-rw---- 1 root disk 1, 6 2011-11-25 19:28 ram6 brw-rw---- 1 root disk 1, 7 2011-11-25 19:28 ram7 brw-rw---- 1 root disk 1, 8 2011-11-25 19:28 ram8 brw-rw---- 1 root disk 1, 9 2011-11-25 19:28 ram9 crw-rw-rw- 1 root root 1, 8 2011-11-25 19:28 random crw-rw-r--+ 1 root root 10, 62 2011-11-25 19:28 rfkill lrwxrwxrwx 1 root root 4 2011-11-25 19:28 rtc -> rtc0 crw------- 1 root root 254, 0 2011-11-25 19:28 rtc0 lrwxrwxrwx 1 root root 3 2011-11-25 19:38 scd0 -> sr0 brw-rw---- 1 root disk 8, 0 2011-11-25 19:28 sda brw-rw---- 1 root disk 8, 1 2011-11-25 19:28 sda1 brw-rw---- 1 root disk 8, 2 2011-11-25 19:28 sda2 brw-rw---- 1 root disk 8, 3 2011-11-25 19:28 sda3 brw-rw---- 1 root disk 8, 5 2011-11-25 19:28 sda5 brw-rw---- 1 root disk 8, 6 2011-11-25 19:28 sda6 brw-rw---- 1 root disk 8, 16 2011-11-25 19:28 sdb brw-rw---- 1 root disk 8, 17 2011-11-25 19:28 sdb1 crw-rw---- 1 root disk 21, 0 2011-11-25 19:28 sg0 crw-rw---- 1 root disk 21, 1 2011-11-25 19:28 sg1 crw-rw----+ 1 root cdrom 21, 2 2011-11-25 19:28 sg2 lrwxrwxrwx 1 root root 8 2011-11-25 19:28 shm -> /run/shm crw------- 1 root root 10, 231 2011-11-25 19:28 snapshot drwxr-xr-x 4 root root 280 2011-11-25 19:28 snd brw-rw----+ 1 root cdrom 11, 0 2011-11-25 19:38 sr0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdout -> /proc/self/fd/1 crw-rw-rw- 1 root tty 5, 0 2011-11-25 19:35 tty crw--w---- 1 root tty 4, 0 2011-11-25 19:28 tty0 crw------- 1 root root 4, 1 2011-11-25 19:28 tty1 crw--w---- 1 root tty 4, 10 2011-11-25 19:28 tty10 crw--w---- 1 root tty 4, 11 2011-11-25 19:28 tty11 crw--w---- 1 root tty 4, 12 2011-11-25 19:28 tty12 crw--w---- 1 root tty 4, 13 2011-11-25 19:28 tty13 crw--w---- 1 root tty 4, 14 2011-11-25 19:28 tty14 crw--w---- 1 root tty 4, 15 2011-11-25 19:28 tty15 crw--w---- 1 root tty 4, 16 2011-11-25 19:28 tty16 crw--w---- 1 root tty 4, 17 2011-11-25 19:28 tty17 crw--w---- 1 root tty 4, 18 2011-11-25 19:28 tty18 crw--w---- 1 root tty 4, 19 2011-11-25 19:28 tty19 crw------- 1 root root 4, 2 2011-11-25 19:28 tty2 crw--w---- 1 root tty 4, 20 2011-11-25 19:28 tty20 crw--w---- 1 root tty 4, 21 2011-11-25 19:28 tty21 crw--w---- 1 root tty 4, 22 2011-11-25 19:28 tty22 crw--w---- 1 root tty 4, 23 2011-11-25 19:28 tty23 crw--w---- 1 root tty 4, 24 2011-11-25 19:28 tty24 crw--w---- 1 root tty 4, 25 2011-11-25 19:28 tty25 crw--w---- 1 root tty 4, 26 2011-11-25 19:28 tty26 crw--w---- 1 root tty 4, 27 2011-11-25 19:28 tty27 crw--w---- 1 root tty 4, 28 2011-11-25 19:28 tty28 crw--w---- 1 root tty 4, 29 2011-11-25 19:28 tty29 crw------- 1 root root 4, 3 2011-11-25 19:28 tty3 crw--w---- 1 root tty 4, 30 2011-11-25 19:28 tty30 crw--w---- 1 root tty 4, 31 2011-11-25 19:28 tty31 crw--w---- 1 root tty 4, 32 2011-11-25 19:28 tty32 crw--w---- 1 root tty 4, 33 2011-11-25 19:28 tty33 crw--w---- 1 root tty 4, 34 2011-11-25 19:28 tty34 crw--w---- 1 root tty 4, 35 2011-11-25 19:28 tty35 crw--w---- 1 root tty 4, 36 2011-11-25 19:28 tty36 crw--w---- 1 root tty 4, 37 2011-11-25 19:28 tty37 crw--w---- 1 root tty 4, 38 2011-11-25 19:28 tty38 crw--w---- 1 root tty 4, 39 2011-11-25 19:28 tty39 crw------- 1 root root 4, 4 2011-11-25 19:28 tty4 crw--w---- 1 root tty 4, 40 2011-11-25 19:28 tty40 crw--w---- 1 root tty 4, 41 2011-11-25 19:28 tty41 crw--w---- 1 root tty 4, 42 2011-11-25 19:28 tty42 crw--w---- 1 root tty 4, 43 2011-11-25 19:28 tty43 crw--w---- 1 root tty 4, 44 2011-11-25 19:28 tty44 crw--w---- 1 root tty 4, 45 2011-11-25 19:28 tty45 crw--w---- 1 root tty 4, 46 2011-11-25 19:28 tty46 crw--w---- 1 root tty 4, 47 2011-11-25 19:28 tty47 crw--w---- 1 root tty 4, 48 2011-11-25 19:28 tty48 crw--w---- 1 root tty 4, 49 2011-11-25 19:28 tty49 crw------- 1 root root 4, 5 2011-11-25 19:28 tty5 crw--w---- 1 root tty 4, 50 2011-11-25 19:28 tty50 crw--w---- 1 root tty 4, 51 2011-11-25 19:28 tty51 crw--w---- 1 root tty 4, 52 2011-11-25 19:28 tty52 crw--w---- 1 root tty 4, 53 2011-11-25 19:28 tty53 crw--w---- 1 root tty 4, 54 2011-11-25 19:28 tty54 crw--w---- 1 root tty 4, 55 2011-11-25 19:28 tty55 crw--w---- 1 root tty 4, 56 2011-11-25 19:28 tty56 crw--w---- 1 root tty 4, 57 2011-11-25 19:28 tty57 crw--w---- 1 root tty 4, 58 2011-11-25 19:28 tty58 crw--w---- 1 root tty 4, 59 2011-11-25 19:28 tty59 crw------- 1 root root 4, 6 2011-11-25 19:28 tty6 crw--w---- 1 root tty 4, 60 2011-11-25 19:28 tty60 crw--w---- 1 root tty 4, 61 2011-11-25 19:28 tty61 crw--w---- 1 root tty 4, 62 2011-11-25 19:28 tty62 crw--w---- 1 root tty 4, 63 2011-11-25 19:28 tty63 crw--w---- 1 root tty 4, 7 2011-11-25 19:28 tty7 crw--w---- 1 root tty 4, 8 2011-11-25 19:28 tty8 crw--w---- 1 root tty 4, 9 2011-11-25 19:28 tty9 crw------- 1 root root 5, 3 2011-11-25 19:28 ttyprintk crw-rw---- 1 root dialout 4, 64 2011-11-25 19:28 ttyS0 crw-rw---- 1 root dialout 4, 65 2011-11-25 19:28 ttyS1 crw-rw---- 1 root dialout 4, 74 2011-11-25 19:28 ttyS10 crw-rw---- 1 root dialout 4, 75 2011-11-25 19:28 ttyS11 crw-rw---- 1 root dialout 4, 76 2011-11-25 19:28 ttyS12 crw-rw---- 1 root dialout 4, 77 2011-11-25 19:28 ttyS13 crw-rw---- 1 root dialout 4, 78 2011-11-25 19:28 ttyS14 crw-rw---- 1 root dialout 4, 79 2011-11-25 19:28 ttyS15 crw-rw---- 1 root dialout 4, 80 2011-11-25 19:28 ttyS16 crw-rw---- 1 root dialout 4, 81 2011-11-25 19:28 ttyS17 crw-rw---- 1 root dialout 4, 82 2011-11-25 19:28 ttyS18 crw-rw---- 1 root dialout 4, 83 2011-11-25 19:28 ttyS19 crw-rw---- 1 root dialout 4, 66 2011-11-25 19:28 ttyS2 crw-rw---- 1 root dialout 4, 84 2011-11-25 19:28 ttyS20 crw-rw---- 1 root dialout 4, 85 2011-11-25 19:28 ttyS21 crw-rw---- 1 root dialout 4, 86 2011-11-25 19:28 ttyS22 crw-rw---- 1 root dialout 4, 87 2011-11-25 19:28 ttyS23 crw-rw---- 1 root dialout 4, 88 2011-11-25 19:28 ttyS24 crw-rw---- 1 root dialout 4, 89 2011-11-25 19:28 ttyS25 crw-rw---- 1 root dialout 4, 90 2011-11-25 19:28 ttyS26 crw-rw---- 1 root dialout 4, 91 2011-11-25 19:28 ttyS27 crw-rw---- 1 root dialout 4, 92 2011-11-25 19:28 ttyS28 crw-rw---- 1 root dialout 4, 93 2011-11-25 19:28 ttyS29 crw-rw---- 1 root dialout 4, 67 2011-11-25 19:28 ttyS3 crw-rw---- 1 root dialout 4, 94 2011-11-25 19:28 ttyS30 crw-rw---- 1 root dialout 4, 95 2011-11-25 19:28 ttyS31 crw-rw---- 1 root dialout 4, 68 2011-11-25 19:28 ttyS4 crw-rw---- 1 root dialout 4, 69 2011-11-25 19:28 ttyS5 crw-rw---- 1 root dialout 4, 70 2011-11-25 19:28 ttyS6 crw-rw---- 1 root dialout 4, 71 2011-11-25 19:28 ttyS7 crw-rw---- 1 root dialout 4, 72 2011-11-25 19:28 ttyS8 crw-rw---- 1 root dialout 4, 73 2011-11-25 19:28 ttyS9 d rwxr-xr-x 3 root root 60 2011-11-25 19:28 .udev crw-r----- 1 root root 10, 223 2011-11-25 19:28 uinput crw-rw-rw- 1 root root 1, 9 2011-11-25 19:28 urandom drwxr-xr-x 2 root root 60 2011-11-25 19:27 usb crw------- 1 root root 252, 0 2011-11-25 19:28 usbmon0 crw------- 1 root root 252, 1 2011-11-25 19:28 usbmon1 crw------- 1 root root 252, 2 2011-11-25 19:28 usbmon2 crw------- 1 root root 252, 3 2011-11-25 19:28 usbmon3 crw------- 1 root root 252, 4 2011-11-25 19:28 usbmon4 crw------- 1 root root 252, 5 2011-11-25 19:28 usbmon5 crw------- 1 root root 252, 6 2011-11-25 19:28 usbmon6 crw------- 1 root root 252, 7 2011-11-25 19:28 usbmon7 crw------- 1 root root 252, 8 2011-11-25 19:28 usbmon8 drwxr-xr-x 4 root root 80 2011-11-25 19:28 v4l crw------- 1 root root 10, 57 2011-11-25 19:28 vboxdrv crw------- 1 root root 10, 56 2011-11-25 19:28 vboxnetctl drwxr-x--- 4 root vboxusers 80 2011-11-25 19:28 vboxusb crw-rw---- 1 root tty 7, 0 2011-11-25 19:28 vcs crw-rw---- 1 root tty 7, 1 2011-11-25 19:28 vcs1 crw-rw---- 1 root tty 7, 2 2011-11-25 19:28 vcs2 crw-rw---- 1 root tty 7, 3 2011-11-25 19:28 vcs3 crw-rw---- 1 root tty 7, 4 2011-11-25 19:28 vcs4 crw-rw---- 1 root tty 7, 5 2011-11-25 19:28 vcs5 crw-rw---- 1 root tty 7, 6 2011-11-25 19:28 vcs6 crw-rw---- 1 root tty 7, 128 2011-11-25 19:28 vcsa crw-rw---- 1 root tty 7, 129 2011-11-25 19:28 vcsa1 crw-rw---- 1 root tty 7, 130 2011-11-25 19:28 vcsa2 crw-rw---- 1 root tty 7, 131 2011-11-25 19:28 vcsa3 crw-rw---- 1 root tty 7, 132 2011-11-25 19:28 vcsa4 crw-rw---- 1 root tty 7, 133 2011-11-25 19:28 vcsa5 crw-rw---- 1 root tty 7, 134 2011-11-25 19:28 vcsa6 crw------- 1 root root 10, 63 2011-11-25 19:28 vga_arbiter crw-rw----+ 1 root video 81, 0 2011-11-25 19:28 video0 crw-rw-rw- 1 root root 1, 5 2011-11-25 19:28 zero sg_scan -i gives me: sudo sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST31000524NS SN12 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi0 channel=0 id=1 lun=0 [em] ATA WDC WD15EADS-00S 01.0 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi2 channel=0 id=0 lun=0 [em] HL-DT-ST BDDVDRW CH08LS10 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5] sg_map gives me: /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 /dev/scd0 lsscsi -l gives me: [0:0:0:0] disk ATA ST31000524NS SN12 /dev/sda state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [0:0:1:0] disk ATA WDC WD15EADS-00S 01.0 /dev/sdb state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [2:0:0:0] cd/dvd HL-DT-ST BDDVDRW CH08LS10 2.00 /dev/sr0 state=running queue_depth=1 scsi_level=6 type=5 device_blocked=0 timeout=30 my udf mod is: filename: /lib/modules/3.0.0-14-generic/kernel/fs/udf/udf.ko license: GPL description: Universal Disk Format Filesystem author: Ben Fennema srcversion: 6ABDE012374D96B9685B8E5 depends: crc-itu-t vermagic: 3.0.0-14-generic SMP mod_unload modversions Do I need special drivers or mods enabled? Do I need to change some BIOS settings? edit: Somehow I am now able to fire the mount command without any filesystem errors, but now I get: mount: no medium found on /dev/sr0

  Read the article

• CodePlex Daily Summary for Sunday, October 28, 2012

  CodePlex Daily Summary for Sunday, October 28, 2012Popular ReleasesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.ZXMAK2: Version 2.6.7.0: - small performance improvements - fix & improvements for Direct3D renderer (thanks to zebest for testing)Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...MCEBuddy 2.x: MCEBuddy 2.3.5: Changelog for 2.3.5 (32bit and 64bit) 1. Fixed a bug causing MCEBuddy to crash during or after installation on Windows XP 2. Bugfix for resource leak with UPnP which would lead to a failure after many days 3. Increased the UPnP discovery re-scan interval from 10 minutes to 30 minutes 4. Added support for specifying TVDB and IMDB id’s in the conversion task page (forcing the internet lookup for metadata)CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1025.5): [NEW] Support for connecting to CRM Online via Office 365 (OSDP) [NEW] Current connection information and loaded ribbon name are displayed in the status bar [IMPROVED] Connect dialog minor improvements and error message descriptions [IMPROVED] Connecting to a CRM server will close currently loaded ribbon upon confirmation (if another ribbon was loaded previously) [FIX] Fixed bug in Open Ribbon dialog which would not allow to refresh entity list more than onceReadable Passphrase Generator: KeePass Plugin 0.8.0: Changes: Interrogative phrases (questions) like why did the statesman burgle amidst lucid sunlamps Support transitive / intransitive verbs (whether a verb needs a subject or not). Change adverbs to be either before or after the verb, at random. Add an "equal" version of each strength, where each possibility is equally likely (for password purists). 3401 words in the default dictionary (~400 more than previous release) Fixed bugs when choosing verb tenseseWay payment gateway provider for NB_Store: NB_Store_Gateway_eWay: Install package for eWAY gateway for NB_Store.fastJSON: v2.0.9: - added support for root level DataSet and DataTable deserialize (you have to do ToObject<DataSet>(...) ) - added dataset testsMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.72: Fix for Issue #18819 - bad optimization of return/assign operator.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.390: Version 2.5.0.390 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Fix recent file list remove issue. WAF: Minor code improvements. BookLibrary: Fix Blend design time support o...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...New ProjectsAnalytics for Windows 8: SIlverlight / WPF User control integrated in WPF / SILVERLIGHT / WINDOWS PHONE Apps in order to collect user data ( Action , Timespan etc ) . bGui - User Interfaces in Batch: A small project for allowing basic user interface creation in batch. Still under strict development, see documentation for current functionality.Blog Projects: Projects wich i use in my blog postsCloud Sync Service: This Windows Service lets you sync your files across other machines by using Cloud File Storage as gateway. Amazon S3 and Windows Azure supported.CocoaVP8: CocoaVP8 is a dual-licensed commercial/GPL native library which allows Mac and iOS applications to easily use the VP8 video codec.DarkSky Orchard Microdata: Microdata is an Orchard module that exposes a MicrodataPart that will render microdata for your content items.Gerenciador Paroquial: Um conjunto de ferramentas desenvolvido para auxiliar a administração de comunidades eclesiásticas episcopais.Quick Launch: Quick Launch - a New Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsRDI Alef: RDI ALEF (ALef Entities Framework) é uma biblioteca desenvolvida em C# para persistência de objetos em um banco de dados. Encapsula um manipulador SQL e o funciSend multiple SMS via Way2SMS C#: Way2SMS, 160BY2, SMS, INDIATrending: Trending program; calculates the highest and lowest changes in frequency of specific words in two files.

  Read the article

• WTSVirtualChannelRead Only reads the first letter of the string.

  - by Scott Chamberlain

  I am trying to write a hello world type program for using virtual channels in the windows terminal services client. public partial class Form1 : Form { public Form1() { InitializeComponent(); } IntPtr mHandle = IntPtr.Zero; private void Form1_Load(object sender, EventArgs e) { mHandle = NativeMethods.WTSVirtualChannelOpen(IntPtr.Zero, -1, "TSCRED"); if (mHandle == IntPtr.Zero) { throw new Win32Exception(Marshal.GetLastWin32Error()); } } private void button1_Click(object sender, EventArgs e) { uint bufferSize = 1024; StringBuilder buffer = new StringBuilder(); uint bytesRead; NativeMethods.WTSVirtualChannelRead(mHandle, 0, buffer, bufferSize, out bytesRead); if (bytesRead == 0) { MessageBox.Show("Got no Data"); } else { MessageBox.Show("Got data: " + buffer.ToString()); } } protected override void Dispose(bool disposing) { if (mHandle != System.IntPtr.Zero) { NativeMethods.WTSVirtualChannelClose(mHandle); } base.Dispose(disposing); } } internal static class NativeMethods { [DllImport("Wtsapi32.dll")] public static extern IntPtr WTSVirtualChannelOpen(IntPtr server, int sessionId, [MarshalAs(UnmanagedType.LPStr)] string virtualName); //[DllImport("Wtsapi32.dll", SetLastError = true)] //public static extern bool WTSVirtualChannelRead(IntPtr channelHandle, long timeout, // byte[] buffer, int length, ref int bytesReaded); [DllImport("Wtsapi32.dll")] public static extern bool WTSVirtualChannelClose(IntPtr channelHandle); [DllImport("Wtsapi32.dll", EntryPoint = "WTSVirtualChannelRead")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool WTSVirtualChannelRead( [In()] System.IntPtr hChannelHandle , uint TimeOut , [Out()] [MarshalAs(UnmanagedType.LPStr)] System.Text.StringBuilder Buffer , uint BufferSize , [Out()] out uint pBytesRead); } I am sending the data from the MSTSC COM object and ActiveX controll. public partial class Form1 : Form { public Form1() { InitializeComponent(); } private void Form1_Load(object sender, EventArgs e) { rdp.Server = "schamberlainvm"; rdp.UserName = "TestAcct"; IMsTscNonScriptable secured = (IMsTscNonScriptable)rdp.GetOcx(); secured.ClearTextPassword = "asdf"; rdp.CreateVirtualChannels("TSCRED"); rdp.Connect(); } private void button1_Click(object sender, EventArgs e) { rdp.SendOnVirtualChannel("TSCRED", "Hello World!"); } } //Designer code // // rdp // this.rdp.Enabled = true; this.rdp.Location = new System.Drawing.Point(12, 12); this.rdp.Name = "rdp"; this.rdp.OcxState = ((System.Windows.Forms.AxHost.State)(resources.GetObject("rdp.OcxState"))); this.rdp.Size = new System.Drawing.Size(1092, 580); this.rdp.TabIndex = 0; I am getting a execption every time NativeMethods.WTSVirtualChannelRead runs Any help on this would be greatly appreciated. EDIT -- mHandle has a non-zero value when the function runs. updated code to add that check. EDIT2 -- I used the P/Invoke Interop Assistant and generated a new sigiture [DllImport("Wtsapi32.dll", EntryPoint = "WTSVirtualChannelRead")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool WTSVirtualChannelRead( [In()] System.IntPtr hChannelHandle , uint TimeOut , [Out()] [MarshalAs(UnmanagedType.LPStr)] StringBuilder Buffer , uint BufferSize , [Out()] out uint pBytesRead); it now receives the text string (Yea!) but it only gets the first letter of my test string(Boo!). Any ideas on what is going wrong? EDIT 3 --- After the call that should of read the hello world; BytesRead = 24 Buffer.Length = 1; Buffer.Capacity = 16; Buffer.m_StringValue = "H";

  Read the article

• Sending emails in web applications

  - by Denise

  Hi everyone, I'm looking for some opinions here, I'm building a web application which has the fairly standard functionality of: Register for an account by filling out a form and submitting it. Receive an email with a confirmation code link Click the link to confirm the new account and log in When you send emails from your web application, it's often (usually) the case that there will be some change to the persistence layer. For example: A new user registers for an account on your site - the new user is created in the database and an email is sent to them with a confirmation link A user assigns a bug or issue to someone else - the issue is updated and email notifications are sent. How you send these emails can be critical to the success of your application. How you send them depends on how important it is that the intended recipient receives the email. We'll look at the following four strategies in relation to the case where the mail server is down, using example 1. TRANSACTIONAL & SYNCHRONOUS The sending of the email fails and the user is shown an error message saying that their account could not be created. The application will appear to be slow and unresponsive as the application waits for the connection timeout. The account is not created in the database because the transaction is rolled back. TRANSACTIONAL & ASYNCHRONOUS The transactional definition here refers to sending the email to a JMS queue or saving it in a database table for another background process to pick up and send. The user account is created in the database, the email is sent to a JMS queue for processing later. The transaction is successful and committed. The user is shown a message saying that their account was created and to check their email for a confirmation link. It's possible in this case that the email is never sent due to some other error, however the user is told that the email has been sent to them. There may be some delay in getting the email sent to the user if application support has to be called in to diagnose the email problem. NON-TRANSACTIONAL & SYNCHRONOUS The user is created in the database, but the application gets a timeout error when it tries to send the email with the confirmation link. The user is shown an error message saying that there was an error. The application is slow and unresponsive as it waits for the connection timeout When the mail server comes back to life and the user tries to register again, they are told their account already exists but has not been confirmed and are given the option of having the email re-sent to them. NON-TRANSACTIONAL & ASYNCHRONOUS The only difference between this and transactional & asynchronous is that if there is an error sending the email to the JMS queue or saving it in the database, the user account is still created but the email is never sent until the user attempts to register again. What I'd like to know is what have other people done here? Can you recommend any other solutions other than the 4 I've mentioned above? What's a reasonable way of approaching this problem? I don't want to over-engineer a system that's dealing with the (hopefully) rare situation where my mail server goes down! The simplest thing to do is to code it synchronously, but are there any other pitfalls to this approach? I guess I'm wondering if there's a best practice, I couldn't find much out there by googling.

  Read the article

• Perl IO modules possibly causing issues in Net::DNS module

  - by Rich

  Hi! I’m porting some software that I wrote for a White Russian OpenWRT system to a new Kamikaze 8.09.1 OpenWRT system but I am having some serious issues that I’m hoping you can help me with. Old system Linux kernel 2.4.34 MIPSEL arch Perl 5.8.7 Net::DNS 0.48 IO 1.21 IO::Socket 1.28 IO::Socket::INET 1.28 New system Linux kernel 2.6.26.8 MIPS arch Perl 5.10.0 Net::DNS 0.66 IO 1.23_01 IO::Socket 1.30_01 IO::Socket::INET 1.31 First, let me provide some background information… I am trying to resolve my server (clearprobe.winbeam.com) from within my Perl program and see the following if I enable debugging in Net::DNS: resolve: Server 'clearprobe-ddns.winbeam.com' ;; query(clearprobe-ddns.winbeam.com) ;; setting up an AF_INET() family type UDP socket ;; send_udp(192.168.88.1:53) ;; send_udp(4.2.2.2:53) ;; send_udp(192.168.88.1:53) ;; send_udp(4.2.2.2:53) resolve: res->errorstring: query timed out Both of these servers resolve clearprobe.winbeam.com fine from the command line: root@cwb-2-11:~# echo “nameserver 192.168.88.1” > /etc/resolv.conf root@cwb-2-11:~# nslookup clearprobe-ddns.winbeam.com Server: 192.168.88.1 Address 1: 192.168.88.1 router Name: clearprobe-ddns.winbeam.com Address 1: 64.13.48.40 64-13-48-40.war.clearwire-dns.net root@cwb-2-11:~# echo “nameserver 4.2.2.2” > /etc/resolv.conf root@cwb-2-11:~# nslookup clearprobe-ddns.winbeam.com Server: 4.2.2.2 Address 1: 4.2.2.2 vnsc-bak.sys.gtei.net Name: clearprobe-ddns.winbeam.com Address 1: 64.13.48.40 64-13-48-40.war.clearwire-dns.net Using Perl’s call to the C gethostbyaddr() function works fine, but I need to do another lookup later in the software which requires that I specify the nameserver (clearprobe-ddns.winbeam.com is the authority for my internal DNS zone), hence my Net::DNS requirement. Now, here is the IO module-specific information: What I am seeing is that the reply is coming back from the nameserver (confirmed via tcpdump – I can send the captures if you’d like), but the UDP packets are sitting in the process’s UDP receive queue pending reception by Net::DNS (the approx 1752 bytes per response stay queued waiting for $sel-can_read()): root@cwb-2-11:~# netstat -una Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State udp 1752 0 0.0.0.0:52680 0.0.0.0:* root@cwb-2-11:~# netstat -una Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State udp 5256 0 0.0.0.0:52680 0.0.0.0:* If I force $sock[AF_INET]-recv($buf, $self-_packetsz) around line 803 of /usr/lib/perl5/5.10/Net/DNS/Resolver/Base.pm, instead of waiting for IO::Select’s can_read() function ( @ready = $sel-can_read($timeout)) to populate @ready, the response is received and processed. Any idea what could be causing this issue? In a possibly related matter, I noticed in another script that the following code fails in the same manner (network responses stay in the process’s TCP receive queue) with the new system: $sock = new IO::Socket::INET( PeerAddr => "$server", PeerPort => 37, Proto => 'tcp', Timeout => 5 ); Whereas the following code works: $sock = new IO::Socket::INET( PeerAddr => "$server", PeerPort => 37, Proto => 'tcp' ); I have looked through the NET::DNS code and don’t see a timeout passed for the UDP sockets, so I am not sure if that this is related or not. Please let me know if I can provide you with any further information in order to help diagnose this issue. Thanks! -Rich

  Read the article

• Right code to retrieve data from sql server database

  - by HasanGursoy

  Hi, I have some problems in database connection and wonder if I have something wrong in my code. Please review. This question is related: Switch between databases, use two databases simultaneously question. cs="Data Source=mywebsite.com;Initial Catalog=database;User Id=root;Password=toor;Connect Timeout=10;Pooling='true';" using (SqlConnection cnn = new SqlConnection(WebConfigurationManager.ConnectionStrings["cs"].ConnectionString)) { using (SqlCommand cmmnd = new SqlCommand("", cnn)) { try { cnn.Open(); #region Header & Description cmmnd.Parameters.Add("@CatID", SqlDbType.Int).Value = catId; cmmnd.CommandText = "SELECT UpperID, Title, Description FROM Categories WHERE CatID=@CatID;"; string mainCat = String.Empty, rootCat = String.Empty; using (SqlDataReader rdr = cmmnd.ExecuteReader()) { if (rdr.Read()) { mainCat = rdr["Title"].ToString(); upperId = Convert.ToInt32(rdr["UpperID"]); description = rdr["Title"]; } else { Response.Redirect("/", false); } } if (upperId > 0) //If upper category exists add its name { cmmnd.Parameters["@CatID"].Value = upperId; cmmnd.CommandText = "SELECT Title FROM Categories WHERE CatID=@CatID;"; using (SqlDataReader rdr = cmmnd.ExecuteReader()) { if (rdr.Read()) { rootCat = "<a href='x.aspx'>" + rdr["Title"] + "</a> &raquo; "; } } } #endregion #region Sub-Categories if (upperId == 0) //show only at root categories { cmmnd.Parameters["@CatID"].Value = catId; cmmnd.CommandText = "SELECT Count(CatID) FROM Categories WHERE UpperID=@CatID;"; if (Convert.ToInt32(cmmnd.ExecuteScalar()) > 0) { cmmnd.CommandText = "SELECT CatID, Title FROM Categories WHERE UpperID=@CatID ORDER BY Title;"; using (SqlDataReader rdr = cmmnd.ExecuteReader()) { while (rdr.Read()) { subcat.InnerHtml += "<a href='x.aspx'>" + rdr["Title"].ToString().ToLower() + "</a>\n"; description += rdr["Title"] + ", "; } } } } #endregion } catch (Exception ex) { HasanG.LogException(ex, Request.RawUrl, HttpContext.Current); Response.Redirect("/", false); } finally { cnn.Close(); } } } The random errors I'm receiving are: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. Cannot open database "db" requested by the login. The login failed. Login failed for user 'root'.

  Read the article

• Session state provider and global.asax not interacting properly?

  - by yodaj007

  I'm experimenting with creating a crude, proof-of-concept session state store provider in ASP.Net. But I've got a problem and I'm not sure what to do about it. The website works properly when using the InProc provider. The Session_Start in global.asax is called on session creation as it should. But not if I implement my own provider. The Session_Start method from global.asax isn't being called at all if a new session is being created (that is, I delete the session state file). Am I missing something important here? public class TestSessionProvider : SessionStateStoreProviderBase { private const string ROOT = "c:\\projects\\sessions\\"; private const int TIMEOUT_MINUTES = 30; public string ApplicationName { get { return HostingEnvironment.ApplicationVirtualPath; } } private string GetFilename(string id) { string filename = String.Format("{0}_{1}.session", ApplicationName, id); char[] invalids = Path.GetInvalidPathChars(); for (int i = 0; i < invalids.Length; i++) { filename = filename.Replace(invalids[i], '_'); } return Path.Combine(ROOT, Path.GetFileName(filename)); } public override void Initialize(string name, NameValueCollection config) { if (config == null) throw new ArgumentNullException("config"); if (String.IsNullOrEmpty(name)) name = "Sporkalicious"; base.Initialize(name, config); } public override SessionStateStoreData CreateNewStoreData(HttpContext context, int timeout) { SessionStateItemCollection items = new SessionStateItemCollection(); HttpStaticObjectsCollection objects = SessionStateUtility.GetSessionStaticObjects(context); return new SessionStateStoreData(items, objects, TIMEOUT_MINUTES); } /// <summary> /// The CreateUninitializedItem method is used with cookieless sessions when the regenerateExpiredSessionId /// attribute is set to true, which causes SessionStateModule to generate a new SessionID value when an /// expired session ID is encountered. /// </summary> /// <param name="context"></param> /// <param name="id"></param> /// <param name="timeout"></param> public override void CreateUninitializedItem(HttpContext context, string id, int timeout) { FileStream fs = File.Open(GetFilename(id), FileMode.CreateNew, FileAccess.Write, FileShare.None); BinaryWriter writer = new BinaryWriter(fs); SessionStateItemCollection coll = new SessionStateItemCollection(); coll.Serialize(writer); fs.Flush(); fs.Close(); } public override SessionStateStoreData GetItem(HttpContext context, string id, out bool locked, out TimeSpan lockAge, out object lockId, out SessionStateActions actions) { return GetItemExclusive(context, id, out locked, out lockAge, out lockId, out actions); } public override SessionStateStoreData GetItemExclusive(HttpContext context, string id, out bool locked, out TimeSpan lockAge, out object lockId, out SessionStateActions actions) { locked = false; lockAge = TimeSpan.FromDays(1); lockId = 0; actions = SessionStateActions.None; if (!File.Exists(GetFilename(id))) { return null; } FileStream fs = File.Open(GetFilename(id), FileMode.Open, FileAccess.ReadWrite, FileShare.Read); BinaryReader reader = new BinaryReader(fs); SessionStateItemCollection coll = SessionStateItemCollection.Deserialize(reader); fs.Close(); return new SessionStateStoreData(coll, new HttpStaticObjectsCollection(), TIMEOUT_MINUTES); } public override void ReleaseItemExclusive(HttpContext context, string id, object lockId) { } public override void RemoveItem(HttpContext context, string id, object lockId, SessionStateStoreData item) { File.Delete(GetFilename(id)); } public override void ResetItemTimeout(HttpContext context, string id) { } public override void SetAndReleaseItemExclusive(HttpContext context, string id, SessionStateStoreData item, object lockId, bool newItem) { if (!File.Exists(GetFilename(id))) { CreateUninitializedItem(context, id, 10); } FileStream fs = File.Open(GetFilename(id), FileMode.Truncate, FileAccess.Write, FileShare.None); BinaryWriter writer = new BinaryWriter(fs); SessionStateItemCollection coll = (SessionStateItemCollection)item.Items; coll.Serialize(writer); fs.Flush(); fs.Close(); } public override bool SetItemExpireCallback(SessionStateItemExpireCallback expireCallback) { return false; } public override void InitializeRequest(HttpContext context){} public override void EndRequest(HttpContext context){} public override void Dispose(){} }

  Read the article

• Running code when all threads are finished processing.

  - by rich97

  Quick note: Java and Android noob here, I'm open to you telling me I'm stupid (as long as you tell me why.) I have an android application which requires me start multiple threads originating from various classes and only advance to the next activity once all threads have done their job. I also want to add a "failsafe" timeout in case one the the threads takes too long (HTTP request taking too long or something.) I searched Stack Overflow and found a post saying that I should create a class to keep a running total of open threads and then use a timer to poll for when all the threads are completed. I think I've created a working class to do this for me, it's untested as of yet but has no errors showing in eclipse. Is this a correct implementation? Are there any APIs that I should be made aware of (such as classes in the Java or Android APIs that could be used in place of the abstract classes at the bottom of the class?) package com.dmp.geofix.libs; import java.util.ArrayList; import java.util.Iterator; import java.util.Timer; import java.util.TimerTask; public class ThreadMonitor { private Timer timer = null; private TimerTask timerTask = null; private OnSuccess onSuccess = null; private OnError onError = null; private static ArrayList<Thread> threads; private final int POLL_OPEN_THREADS = 100; private final int TIMEOUT = 10000; public ThreadMonitor() { timerTask = new PollThreadsTask(); } public ThreadMonitor(OnSuccess s) { timerTask = new PollThreadsTask(); onSuccess = s; } public ThreadMonitor(OnError e) { timerTask = new PollThreadsTask(); onError = e; } public ThreadMonitor(OnSuccess s, OnError e) { timerTask = new PollThreadsTask(); onSuccess = s; onError = e; } public void start() { Iterator<Thread> i = threads.iterator(); while (i.hasNext()) { i.next().start(); } timer = new Timer(); timer.schedule(timerTask, 0, POLL_OPEN_THREADS); } public void finish() { Iterator<Thread> i = threads.iterator(); while (i.hasNext()) { i.next().interrupt(); } threads.clear(); timer.cancel(); } public void addThread(Thread t) { threads.add(t); } public void removeThread(Thread t) { threads.remove(t); t.interrupt(); } class PollThreadsTask extends TimerTask { private int timeElapsed = 0; @Override public void run() { timeElapsed += POLL_OPEN_THREADS; if (timeElapsed <= TIMEOUT) { if (threads.isEmpty() == false) { if (onSuccess != null) { onSuccess.run(); } } } else { if (onError != null) { onError.run(); } finish(); } } } public abstract class OnSuccess { public abstract void run(); } public abstract class OnError { public abstract void run(); } }

  Read the article

• Nginx and client certificates from hierarchical OpenSSL-based certification authorities

  - by Fmy Oen

  I'm trying to set up root certification authority, subordinate certification authority and to generate the client certificates signed by any of this CA that nginx 0.7.67 on Debian Squeeze will accept. My problem is that root CA signed client certificate works fine while subordinate CA signed one results in "400 Bad Request. The SSL certificate error". Step 1: nginx virtual host configuration: server { server_name test.local; access_log /var/log/nginx/test.access.log; listen 443 default ssl; keepalive_timeout 70; ssl_protocols SSLv3 TLSv1; ssl_ciphers AES128-SHA:AES256-SHA:RC4-SHA:DES-CBC3-SHA:RC4-MD5; ssl_certificate /etc/nginx/ssl/server.crt; ssl_certificate_key /etc/nginx/ssl/server.key; ssl_client_certificate /etc/nginx/ssl/client.pem; ssl_verify_client on; ssl_session_cache shared:SSL:10m; ssl_session_timeout 5m; location / { proxy_pass http://testsite.local/; } } Step 2: PKI infrastructure organization for both root and subordinate CA (based on this article): # mkdir ~/pki && cd ~/pki # mkdir rootCA subCA # cp -v /etc/ssl/openssl.cnf rootCA/ # cd rootCA/ # mkdir certs private crl newcerts; touch serial; echo 01 > serial; touch index.txt; touch crlnumber; echo 01 > crlnumber # cp -Rvp * ../subCA/ Almost no changes was made to rootCA/openssl.cnf: [ CA_default ] dir = . # Where everything is kept ... certificate = $dir/certs/rootca.crt # The CA certificate ... private_key = $dir/private/rootca.key # The private key and to subCA/openssl.cnf: [ CA_default ] dir = . # Where everything is kept ... certificate = $dir/certs/subca.crt # The CA certificate ... private_key = $dir/private/subca.key # The private key Step 3: Self-signed root CA certificate generation: # openssl genrsa -out ./private/rootca.key -des3 2048 # openssl req -x509 -new -key ./private/rootca.key -out certs/rootca.crt -config openssl.cnf Enter pass phrase for ./private/rootca.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:rootca Email Address []: Step 4: Subordinate CA certificate generation: # cd ../subCA # openssl genrsa -out ./private/subca.key -des3 2048 # openssl req -new -key ./private/subca.key -out subca.csr -config openssl.cnf Enter pass phrase for ./private/subca.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:subca Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: Step 5: Subordinate CA certificate signing by root CA certificate: # cd ../rootCA/ # openssl ca -in ../subCA/subca.csr -extensions v3_ca -config openssl.cnf Using configuration from openssl.cnf Enter pass phrase for ./private/rootca.key: Check that the request matches the signature Signature ok Certificate Details: Serial Number: 1 (0x1) Validity Not Before: Feb 4 10:49:43 2013 GMT Not After : Feb 4 10:49:43 2014 GMT Subject: countryName = AU stateOrProvinceName = Some-State organizationName = Internet Widgits Pty Ltd commonName = subca X509v3 extensions: X509v3 Subject Key Identifier: C9:E2:AC:31:53:81:86:3F:CD:F8:3D:47:10:FC:E5:8E:C2:DA:A9:20 X509v3 Authority Key Identifier: keyid:E9:50:E6:BF:57:03:EA:6E:8F:21:23:86:BB:44:3D:9F:8F:4A:8B:F2 DirName:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca serial:9F:FB:56:66:8D:D3:8F:11 X509v3 Basic Constraints: CA:TRUE Certificate is to be certified until Feb 4 10:49:43 2014 GMT (365 days) Sign the certificate? [y/n]:y 1 out of 1 certificate requests certified, commit? [y/n]y ... # cd ../subCA/ # cp -v ../rootCA/newcerts/01.pem certs/subca.crt Step 6: Server certificate generation and signing by root CA (for nginx virtual host): # cd ../rootCA # openssl genrsa -out ./private/server.key -des3 2048 # openssl req -new -key ./private/server.key -out server.csr -config openssl.cnf Enter pass phrase for ./private/server.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:test.local Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in server.csr -out certs/server.crt -config openssl.cnf Step 7: Client #1 certificate generation and signing by root CA: # openssl genrsa -out ./private/client1.key -des3 2048 # openssl req -new -key ./private/client1.key -out client1.csr -config openssl.cnf Enter pass phrase for ./private/client1.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:Client #1 Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in client1.csr -out certs/client1.crt -config openssl.cnf Step 8: Client #1 certificate converting to PKCS12 format: # openssl pkcs12 -export -out certs/client1.p12 -inkey private/client1.key -in certs/client1.crt -certfile certs/rootca.crt Step 9: Client #2 certificate generation and signing by subordinate CA: # cd ../subCA/ # openssl genrsa -out ./private/client2.key -des3 2048 # openssl req -new -key ./private/client2.key -out client2.csr -config openssl.cnf Enter pass phrase for ./private/client2.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:Client #2 Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in client2.csr -out certs/client2.crt -config openssl.cnf Step 10: Client #2 certificate converting to PKCS12 format: # openssl pkcs12 -export -out certs/client2.p12 -inkey private/client2.key -in certs/client2.crt -certfile certs/subca.crt Step 11: Passing server certificate and private key to nginx (performed with OS superuser privileges): # cd ../rootCA/ # cp -v certs/server.crt /etc/nginx/ssl/ # cp -v private/server.key /etc/nginx/ssl/ Step 12: Passing root and subordinate CA certificates to nginx (performed with OS superuser privileges): # cat certs/rootca.crt > /etc/nginx/ssl/client.pem # cat ../subCA/certs/subca.crt >> /etc/nginx/ssl/client.pem client.pem file look like this: # cat /etc/nginx/ssl/client.pem -----BEGIN CERTIFICATE----- MIID6TCCAtGgAwIBAgIJAJ/7VmaN048RMA0GCSqGSIb3DQEBBQUAMFYxCzAJBgNV BAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBX aWRnaXRzIFB0eSBMdGQxDzANBgNVBAMTBnJvb3RjYTAeFw0xMzAyMDQxMDM1NTda ... -----END CERTIFICATE----- Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) ... -----BEGIN CERTIFICATE----- MIID4DCCAsigAwIBAgIBATANBgkqhkiG9w0BAQUFADBWMQswCQYDVQQGEwJBVTET MBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50ZXJuZXQgV2lkZ2l0cyBQ dHkgTHRkMQ8wDQYDVQQDEwZyb290Y2EwHhcNMTMwMjA0MTA0OTQzWhcNMTQwMjA0 ... -----END CERTIFICATE----- It looks like everything is working fine: # service nginx reload # Reloading nginx configuration: Enter PEM pass phrase: # nginx. # Step 13: Installing *.p12 certificates in browser (Firefox in my case) gives the problem I've mentioned above. Client #1 = 200 OK, Client #2 = 400 Bad request/The SSL certificate error. Any ideas what should I do? Update 1: Results of SSL connection test attempts: # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/rootca.crt -cert ~/pki/rootCA/certs/client1.crt -key ~/pki/rootCA/private/client1.key -showcerts Enter pass phrase for tmp/testcert/client1.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 --- Certificate chain 0 s:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=test.local i:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca -----BEGIN CERTIFICATE----- MIIDpjCCAo6gAwIBAgIBAjANBgkqhkiG9w0BAQUFADBWMQswCQYDVQQGEwJBVTET MBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50ZXJuZXQgV2lkZ2l0cyBQ dHkgTHRkMQ8wDQYDVQQDEwZyb290Y2EwHhcNMTMwMjA0MTEwNjAzWhcNMTQwMjA0 ... -----END CERTIFICATE----- 1 s:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca i:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca -----BEGIN CERTIFICATE----- MIID6TCCAtGgAwIBAgIJAJ/7VmaN048RMA0GCSqGSIb3DQEBBQUAMFYxCzAJBgNV BAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBX aWRnaXRzIFB0eSBMdGQxDzANBgNVBAMTBnJvb3RjYTAeFw0xMzAyMDQxMDM1NTda ... -----END CERTIFICATE----- --- Server certificate subject=/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=test.local issuer=/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca --- Acceptable client certificate CA names /C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca /C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca --- SSL handshake has read 3395 bytes and written 2779 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: zlib compression Expansion: zlib compression SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: 15BFC2029691262542FAE95A48078305E76EEE7D586400F8C4F7C516B0F9D967 Session-ID-ctx: Master-Key: 23246CF166E8F3900793F0A2561879E5DB07291F32E99591BA1CF53E6229491FEAE6858BFC9AACAF271D9C3706F139C7 Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None TLS session ticket: 0000 - c2 5e 1d d2 b5 6d 40 23-b2 40 89 e4 35 75 70 07 .^...m@#[email protected]. 0010 - 1b bb 2b e6 e0 b5 ab 10-10 bf 46 6e aa 67 7f 58 ..+.......Fn.g.X 0020 - cf 0e 65 a4 67 5a 15 ba-aa 93 4e dd 3d 6e 73 4c ..e.gZ....N.=nsL 0030 - c5 56 f6 06 24 0f 48 e6-38 36 de f1 b5 31 c5 86 .V..$.H.86...1.. ... 0440 - 4c 53 39 e3 92 84 d2 d0-e5 e2 f5 8a 6a a8 86 b1 LS9.........j... Compression: 1 (zlib compression) Start Time: 1359989684 Timeout : 300 (sec) Verify return code: 0 (ok) --- Everything seems fine with Client #2 and root CA certificate but request returns 400 Bad Request error: # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/rootca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 ... Compression: 1 (zlib compression) Start Time: 1359989989 Timeout : 300 (sec) Verify return code: 0 (ok) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request Server: nginx/0.7.67 Date: Mon, 04 Feb 2013 15:00:43 GMT Content-Type: text/html Content-Length: 231 Connection: close <html> <head><title>400 The SSL certificate error</title></head> <body bgcolor="white"> <center><h1>400 Bad Request</h1></center> <center>The SSL certificate error</center> <hr><center>nginx/0.7.67</center> </body> </html> closed Verification fails with Client #2 certificate and subordinate CA certificate: # openssl s_client -connect test.local:443 -CAfile ~/pki/subCA/certs/subca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify error:num=19:self signed certificate in certificate chain verify return:0 ... Compression: 1 (zlib compression) Start Time: 1359990354 Timeout : 300 (sec) Verify return code: 19 (self signed certificate in certificate chain) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request ... Still getting 400 Bad Request error with concatenated CA certificates and Client #2 (but still everything ok with Client #1): # cat certs/rootca.crt ../subCA/certs/subca.crt > certs/concatenatedca.crt # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/concatenatedca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 --- ... Compression: 1 (zlib compression) Start Time: 1359990772 Timeout : 300 (sec) Verify return code: 0 (ok) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request ... Update 2: I've managed to recompile nginx with enabled debug. Here is the part of successfull conection by Client #1 track: 2013/02/05 14:08:23 [debug] 38701#0: *119 accept: <MY IP ADDRESS> fd:3 2013/02/05 14:08:23 [debug] 38701#0: *119 event timer add: 3: 60000:2856497512 2013/02/05 14:08:23 [debug] 38701#0: *119 kevent set event: 3: ft:-1 fl:0025 2013/02/05 14:08:23 [debug] 38701#0: *119 malloc: 28805200:660 2013/02/05 14:08:23 [debug] 38701#0: *119 malloc: 28834400:1024 2013/02/05 14:08:23 [debug] 38701#0: *119 posix_memalign: 28860000:4096 @16 2013/02/05 14:08:23 [debug] 38701#0: *119 http check ssl handshake 2013/02/05 14:08:23 [debug] 38701#0: *119 https ssl handshake: 0x16 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL server name: "test.local" 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_do_handshake: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL handshake handler: 0 2013/02/05 14:08:23 [debug] 38701#0: *119 verify:1, error:0, depth:1, subject:"/C=AU /ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 14:08:23 [debug] 38701#0: *119 verify:1, error:0, depth:0, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=Client #1",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_do_handshake: 1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL: TLSv1, cipher: "AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1" 2013/02/05 14:08:23 [debug] 38701#0: *119 http process request line 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 http process request line 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: 1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: 524 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 http request line: "GET / HTTP/1.1" And here is the part of unsuccessfull conection by Client #2 track: 2013/02/05 13:51:34 [debug] 38701#0: *112 accept: <MY_IP_ADDRESS> fd:3 2013/02/05 13:51:34 [debug] 38701#0: *112 event timer add: 3: 60000:2855488975 2013/02/05 13:51:34 [debug] 38701#0: *112 kevent set event: 3: ft:-1 fl:0025 2013/02/05 13:51:34 [debug] 38701#0: *112 malloc: 28805200:660 2013/02/05 13:51:34 [debug] 38701#0: *112 malloc: 28834400:1024 2013/02/05 13:51:34 [debug] 38701#0: *112 posix_memalign: 28860000:4096 @16 2013/02/05 13:51:34 [debug] 38701#0: *112 http check ssl handshake 2013/02/05 13:51:34 [debug] 38701#0: *112 https ssl handshake: 0x16 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL server name: "test.local" 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL handshake handler: 0 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL handshake handler: 0 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:0, error:20, depth:1, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:0, error:27, depth:1, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:1, error:27, depth:0, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=Client #2",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca" 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: 1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL: TLSv1, cipher: "AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1" 2013/02/05 13:51:34 [debug] 38701#0: *112 http process request line 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: 1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: 524 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 http request line: "GET / HTTP/1.1" So I'm getting OpenSSL error #20 and then #27. According to verify documentation: 20 X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY: unable to get local issuer certificate the issuer certificate could not be found: this occurs if the issuer certificate of an untrusted certificate cannot be found. 27 X509_V_ERR_CERT_UNTRUSTED: certificate not trusted the root CA is not marked as trusted for the specified purpose.

  Read the article

• Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

  - by Srekel

  I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

  Read the article

• DevConnections Slides and Samples Posted

  - by Rick Strahl

  I’ve posted the slides and samples to my DevConnections Sessions for anyone interested. I had a lot of fun with my sessions this time around mainly because the sessions picked were a little off the beaten track (well, the handlers/modules and e-commerce sessions anyway). For those of you that attended I hope you found the sessions useful. For the rest of you – you can check out the slides and samples if you like. Here’s what was covered: Introduction to jQuery with ASP.NET This session covered mostly the client side of jQuery demonstrated on a small sample page with a variety of incrementally built up examples of selection and page manipulation. This session also introduces some of the basics of AJAX communication talking to ASP.NET. When I do this session it never turns out exactly the same way and this time around the examples were on the more basic side and purely done with hands on demonstrations rather than walk throughs of more complex examples. Alas this session always feels like it needs another half an hour to get through the full sortiment of functionality. The slides and samples cover a wider variety of topics and there are many examples that demonstrate more advanced operations like interacting with WCF REST services, using client templating and building rich client only windowed interfaces. Download Low Level ASP.NET: Handlers and Modules This session was a look at the ASP.NET pipeline and it discusses some of the ASP.NET base architecture and key components from HttpRuntime on up through the various modules and handlers that make up the ASP.NET/IIS pipeline. This session is fun as there are a number of cool examples that demonstrate the power and flexibility of ASP.NET, but some of the examples were external and interfacing with other technologies so they’re not actually included in the downloadable samples. However, there are still a few cool ones in there – there’s an image resizing handler, an image overlay module that stamps images with Sample if loaded from a certain folder, an OpenID authentication module (which failed during the demo due to the crappy internet connection at DevConnections this year :-}), Response filtering using a generic filter stream component, a generic error handler and a few others. The slides cover a lot of the ASP.NET pipeline flow and various HttpRuntime components. Download Electronic Payment Processing in ASP.NET Applications This session covered the business end and integration of electronic credit card processing and PayPal. A good part of this session deals with what’s involved in payment processing, getting signed up and who you have to deal with for your merchant account. We then took a look at integration of credit card processing via some generic components provided with the session that allow processing using a unified class interface with specific implementations for several of the most common gateway providers including Authorize.NET, PayFlowPro, LinkPoint, BluePay etc. We also briefly looked at PayPal Classic implementation which provides a quick and cheap if not quite as professional mechanism for taking payments online. The samples provide the Credit Card processing wrappers for the various gateway providers as well as a PayPal helper class to generate the PayPal redirect urls as well as helper code for dealing with IPN callbacks. Download Hope some of you will find the material useful. Enjoy.© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

  Read the article

• Calling XAI Inbound Services from Oracle BI Publisher

  - by ACShorten

  Note: This technique requires Oracle BI Publisher 1.1.3.4.1 which supports Service Complex Types. Web Services require credentials for authentication. Note: The deafults for the product installation are used in this article. If your site uses alternative values then substitute those alternatives where applicable. Note: Examples shown in this article are examples for illustrative purposes only. When building a report in Oracle BI Publisher it may be necessary to call an XAI Inbound Service to get information via the object rather than directly calling the database tables for various reasons: The CLOB fields used in the Object are accessible for a report. Note: CLOB fields cannot be used as criteria in the current release. Objects can take advantage of algorithms to format or calculate additional data that is not stored in the database directly. For example, Information format strings can automatically generated by the object which gives consistent information between a report and the online screens. To use this facility the following process must be performed: Ensure that the product group, cisusers by default, is enabled for the SPLServiceBean in the console. This allows BI Publisher access to call Web Services directly. To ensure this follow the instructions below: Logon to the Oracle WebLogic server console using an appropriate administrator account. By default the user system or weblogic is provided for this purpose. Navigate to the Security Realms section and select your configured realm. This is set to myrealm by default. In the Roles and Policies section, expand the SPLService section of the Deployments option to reveal the SPLServiceBean roles. If there is no role associated with the SPLServiceBean, create a new EJB role and specify the cisusers role, by default. For example:   Add a Role Condition to the role just created, with a Predicate List of Group and specify cisusers as the Group Argument Name. For example: Save all your changes. The XAI Inbound Services to be used by BI Publisher must be defined prior to using the interface. Refer to the XAI Best Practices (Doc Id: 942074.1) from My Oracle Support or via the online help for more information about this process. Inside BI Publisher create your report, according to the BI Publisher documentation. When specifying the dataset, under the Data Model Report option, specify the following to use an XAI Inbound Service as a data source: Parameter Comment Type Web Service Complex Type true Username Any valid user name within the product. This user MUST have security access to the objects referenced in the XAI Inbound Service Password Authentication password for Username Timeout Timeout, in seconds, set for the Web Service call. For example 60 seconds. WSDL URL Use the WSDL URL on the XAI Inbound Service definition as your WSDL URL. It will be in the following format by default:http://<host>:<port>/<server>/XAIApp/xaiserver/<service>?WSDLwhere: <host> - Host Name of Web Application Server <port> - Port allocated to Web Application Server for product access <server> - Server context for server <service> - XAI Inbound Service Name Note: For customers using secure transmission should substitute https instead of http and use the HTTPS port allocated to the product at installation time. Web Service Select the name of the service that shows in the drop-down menu. If no service name shows up, it means that Publisher could not establish a connection with the server or WSDL name provided in the above URL in order to get the service name. See BI Publisher server log for more information. Method Select the name of the Method that shows in the drop-down menu. A method name should show in the Method drop-down menu once the Web Service name is selected. For example: Additionally, filters can be used from the Web Service that can be generated, required or optional, from the WSDL in the Parameter List. For example:

  Read the article

• Gnome Shell Theme Problem on Ubuntu 11.10

  - by Khurram Majeed

  I am trying to install ANewStart GNOME shell themes on Ubuntu 11.10. I have installed gnome shell extension for themes: sudo add-apt-repository ppa:webupd8team/gnome3 sudo apt-get update sudo apt-get install gnome-shell-extensions-user-theme I got the instructions from here ANewStart GNOME Shell Theme + AwOken Icons Theme = Pure Art. But when I go to "Advanced Settings - Shell Extensions" its empty... There is nothing. Also there is a orange triangle sign next to Shell Theme drop down in Advanced Settings - Theme. When I try to run the gnome-tweak-tool from terminal I get following error: imresh@imresh-laptop:~$ gnome-tweak-tool CRITICAL: Error parsing schema org.gnome.shell (/usr/share/glib-2.0/schemas/org.gnome.shell.gschema.xml) Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/gsettings.py", line 45, in __init__ summary = key.getElementsByTagName("summary")[0].childNodes[0].data IndexError: list index out of range WARNING : Error detecting shell Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell_extensions.py", line 145, in __init__ shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 123, in __init__ v = map(int,proxy.version.split(".")) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 46, in version return json.loads(self.execute_js('const Config = imports.misc.config; Config.PACKAGE_VERSION')) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 39, in execute_js result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Shell not running Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 57, in __init__ self._shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 123, in __init__ v = map(int,proxy.version.split(".")) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 46, in version return json.loads(self.execute_js('const Config = imports.misc.config; Config.PACKAGE_VERSION')) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 39, in execute_js result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Could not list shell extensions Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 62, in __init__ extensions = self._shell.list_extensions() AttributeError: ShellThemeTweak instance has no attribute '_shell' (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed Please help me in fixing this. I have also restarted the computer many times it does not make a difference.

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >