Search Results

Search found 22332 results on 894 pages for 'internet explorer 8'.

Page 84/894 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • How to Assign a Static IP to an Ubuntu 10.04 Desktop Computer

    - by Mysticgeek
    If you have a home network with several computers, assigning them static IP addresses can make troubleshooting easier. Today we take a look at switching from DHCP to a static IP in Ubuntu. Assign a Static IP Using Static IPs prevents address conflicts between machines and can allow easier access to them. If you have a small home network and are satisfied with the machines getting their IP address automatically via DHCP, there won’t be anything gained by using static addresses. Using Static IPs isn’t necessarily for the average user, but if you’re a geek who wants to know the address assigned to each machine, it can allow for faster troubleshooting.  To change your Ubuntu machine to a Static IP go to System \ Preferences \ Network Connections. In our example, we’re on a wired system so click on the Wired tab, then select Auto eth0 and click on Edit. Select the IPv4 settings tab, change Method to Manual, click the Add button. Then type in the Static IP Address, Subnet Mask, DNS Servers, and Default Gateway. Then click Apply when you’re finished. Make sure to hit Enter after typing in the Default Gateway otherwise it will revert back to 0.0.0.0 You’ll need to enter in your admin password before the changes go into affect. To verify the changes have been made successfully launch a Terminal session and type in ifconfig at the command prompt, or follow these directions. You also might want to ping the address from another machine to make sure everything is communicating. If you want to assign a Static IP to your Windows machines, check out our article on how to assign a Static IP on Windows systems (make sure to browse the comments as our readers have some good suggestions).  Whether you have a small office or home network set up with a server and several machines, using a Static IP on each device can help you manage them easily. Again, it isn’t for everyone as it really depends on how your network is setup and the way you use it. Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressAllow Remote Control To Your Desktop On UbuntuAssign Custom Shortcut Keys on Ubuntu LinuxKeyboard Ninja: 21 Keyboard Shortcut ArticlesChange Ubuntu Server from DHCP to a Static IP Address TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries

    Read the article

  • FFmpeg Video Hosting for Linux and Windows Server

    - by Aditi
    FFmpeg hosting is a special type of web hosting where the host servers have video transcoding software loaded on them, which allows the automatic conversion of videos from one format to another. FFmpeg is a cross-platform solution for recording, converting, transcoding and stream audio and video. It includes libavcodec – the leading audio/video codec library. FFmpeg hosting gets its name from a set of server side programs (modules) called FFmpeg. There are a number of applications or web scripts available, which allow webmasters to create their own video sharing websites. Video hosting typically requires: PHP 4.3 and above (including support of CLI) Mencoder and also Mplayer FFMpeg-PHP MySQL database server LAME MP3 Encoder Libogg + Libvorbis GD Library 2 or higher CGI-BIN There are number of web service providers who provide FFmpeg hosting service. Following is a list of some of the Best FFmpeg hosting providers for both Linux and Windows Server below. Dream Host Dreamhost provides for web based email access, mail filtering, spam filtering, unlimited email ids, vacation autoresponder, python support, full CGI access and many more services. Price: $7.95 View Details Micfo It offers unlimited disk space and bandwidth. Other services include free domain for life and free Website Transfer with many more services. All in all one of the best option to consider. Price: $5 View Details Host Upon HostUpon offers FFMpeg Hosting on all their hosting packages, with readily installed modules to start a Video website or Social Network with Video uploading. These scripts such as Boonex Dolphin / PHPMotion / Social Engine / ABKsoft Scripts / Joomla Video Plugin / Clipshare / ClipBucket / Social Media / Rayzz / Vidi Script work with their ffmpeg. Their FFMPEG hosting plan offers 24/7/365 support with typical response time of 15min or less. Price: $5.95 View Details DownTown Host DownTown Host provides full and exceptional support by live chat and telephone. It has high-power, modern servers and the finest web server technology. It offers free search engine Submission and continuous data backup protection with free email forwarding and site move. There are many more services too. Site5 This ffmpeg service provider offers uptime guarantee, a real time stats on each server and many more attractive services. Price: $4.95 View Details Cirtex Hosting Cirtex Hosting allows to host 7 websites & domains and provides for unlimited storage space and monthly bandwidth. It also offers FTP and email accounts and many more services. Price: $2.49 View Details FLV Hosting FLV hosting supplies RTMP SERVER STREAMING for large size video streaming and server side recording. It is flexible and costs less. They customize to the clients requirements. Price: $9.95 View Details AptHost This hosting service provides for 24x7x365 Premium Support and fully ffmpeg enabled services. Price: $4.95 View Details HostMDS Great Support, Priced Low. It provides for SSH access, CGI, Ruby on Rails, Perl, PHP, MySQL, front page extentions, 24/7 Support, FREE Domain transfer and spam filtering. It offers instant account setup, low latency fast bandwidth & much more! They were formerly known as Vistapages. Price: $4.95 View Details Related posts:Best WordPress Video Themes for a Video Blog Free Web Based Applications 24+ Coda Alternatives for Windows and Linux

    Read the article

  • OpenFilesView Displays All Open and Locked Files to Help Resolve In-Use Errors

    - by Jason Fitzpatrick
    Windows: You go to move a file and Windows throws up an “In Use” error. OpenFilesView shows you what application or system process is locking up the files you’re trying to move. Sometimes the culprit is obvious; if you go to move your media folder and you’ve got your media player open watching South Park then shutting down the media player is the obvious solution. Other times the culprit is less obvious; sometimes Windows processes and less-than-obvious applications are accessing your files in ways that aren’t apparent. The screenshot below showcases the “In Use” error: This is where OpenFilesView comes into play. Fire up the application to see a list of all active files on your system. The master list is a bit overwhelming (on our test system there were over 1200 open files) but you use the find command to drill down to specific file or folder names. Once you’ve found the locked file you can close the file handle, kill the process, or bring the process to the front (so you can examine the program, if possible, before terminating it). It’s much more efficient than rebooting in an attempt to shake the In-Use error. OpenFilesView is freeware and works on Windows XP through Windows 7. HTG Explains: Do You Really Need to Defrag Your PC? Use Amazon’s Barcode Scanner to Easily Buy Anything from Your Phone How To Migrate Windows 7 to a Solid State Drive

    Read the article

  • How to get Spotify running?

    - by Dante Ashton
    A while ago Spotify (the streaming music service) came out with a preview for Linux of their client. I had succesfully run it throughout 10.04. Now I'm on 10.10, I can't seem to find it in the package manager, let alone install it. Software Sources gives me this; Failed to fetch http://repository.spotify.com/dists/stable/Release Unable to find expected entry non-free/source/Sources in Meta-index file (malformed Release file?) Some index files failed to download, they have been ignored, or old ones used instead. So...as I'm paying for Spotify what...umm...do I do? :P

    Read the article

  • wireless detected but Can't connect to network, Wifi card intel pro wireless N100 BGN

    - by Alexandre777
    Thanks in advance, I installed Linux Mint kernel 3.0.0-12 x64 ,wireless is detected and I configure it in network manager but can't coonect, there are the results of command line: $ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off $ sudo lshw -C network** *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:51:c9:d6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:d7400000-d7401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:5b:39:99:8f:16 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Thank you.

    Read the article

  • Save chromium browser's session

    - by Anwar Shah
    How to manually save session in chromium-brower. I have a Notebook with damaged battery (only gives 5~6 minutes of backup, planning to buy a new one), and in our country "Load Shedding" (power outages) is quite common. So, I had to close my session before shutting down my laptop. When I re-open chromium, there is no tab with previous session. The question is: How can i manually save my session before closing the laptop?

    Read the article

  • Why do browsers leak memory?

    - by Dane Balia
    A colleague and I were speaking about browsers (using a browser control object in a project), and it appears as plain as day that all browsers (Firefox, Chrome, IE, Opera) display the same characteristic or side-effect from their usage and that being 'Leaking Memory'. Can someone explain why that is the case? Surely as with any form of code, there should be proper garbage collection? PS. I've read about some defensive patterns on why this can happen from a developer's perspective. I am aware of an article Crockford wrote on IE; but why is the problem symptomatic of every browser? Thanks

    Read the article

  • How to future-proof my touch-enabled web application?

    - by Rice Flour Cookies
    I recently went out and purchased a touch-screen monitor with the intention of learning how to program touch-enabled web applications. I had reviewed the MDN documentation about touch events, as well as the W3C specification. To get started, I wrote a very short test page with two event handlers: one for the mousedown event and one for the touchstart event. I fired up the web page in IE and touched the document and found that only the mousedown event fired. I saw the same behavior with Firefox, only to find out later that Firefox can be set to enable the touchstart event using about:config. When touch events are enabled, the touchstart event fires, but not mousedown. Chrome was even stranger: it fired both events when I touched the document: touchstart and mousedown, in that order. Only on my Android phone does it appear to be the case that only the touchstart event fires when I touch the document. I did a a Google search and ended up on two interesting pages. First, I found the page on CanIUse for touch events: http://caniuse.com/#feat=touch Can I Use clearly indicates that IE does not support touch events as of this writing, and Firefox only supports touch events if they are manually enabled. Furthermore, all four browsers I mentioned treat the touch in a completely different way. It boils down to this: IE: simulated mouse click Firefox with touch disabled: simulated mouse click Firefox with touch enabled: touch event Chrome: touch event and simulated mouse click Android: touch event What is more frustrating is that Google also found a Microsoft page called RethinkIE. RethinkIE brags about touch support in IE; as a matter of fact, one of their slogans is "Touch the Web". It links to a number of touch-based application. I followed some of these links, and as best I can tell, it's just like CanIUse described; no proper touch support; just simulated mouse clicks. The MDN (https://developer.mozilla.org/en-US/docs/Web/API/Touch) and W3C (http://www.w3.org/TR/touch-events/) documentation describe a far richer interface; an interface that doesn't just simulate mouse clicks, but keeps track of multiple touches at once, the contact area, rotation, and force of each touch, and unique identifiers for each touch so that they can be tracked individually. I don't see how simulated mouse clicks can ever touch the above described functionality, which, once again, is part of the W3C specification, although it is listed as "non-normative", meaning that a browser can claim to be standards-compliant without implementing it. (Why bother making it part of the standard, then?) What motivated my research is that I've written an HTML5 application that doesn't work on Android because Android doesn't fire mouse events. I'm now afraid to try to implement touch for my application because the browsers all behave so differently. I imagine that at some time in the future, the browsers might start handling touch similarly, but how can I tell how they might be handled in the future short of writing code to handle the behavior of each individual browser? Is it possible to write code today that will work with touch-enabled browsers for years to come? If so, how?

    Read the article

  • How to Automatically Backup Your Gmail Attachments With IFTTT

    - by Mark Wilson
    When it comes to getting things done quickly, automation is the name of the game. We’ve looked at IFTTT before, and a new batch of updates has introduced a number of options that can be used to automatically do things with files that are sent to your Gmail address. What could this be used for? Well the most obvious starting point is to simply create a backup of any files that you receive via email. This is useful if you find that you often reach the size limit for your inbox as it enables you to delete emails without having to worry about losing the associated files. Start by paying a visit to the IFTTT website and then either sign into an existing account or create a new one.     

    Read the article

  • http, https and ftp is not working but smtp and imap is working

    - by Unicron
    hi all, yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. i have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. how can i safeley remove the rest of norton internet security? thanks in advance [edit] norton internet security 2010 is sucesfully removed, but still no connectivity

    Read the article

  • how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

    - by Ayesha Ahmad
    i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

    Read the article

  • What would be the total expenses of running an in-home web server?

    - by techaddict
    I have several hosting accounts with companies, and plan to keep them. However, I would like to try my hand at creating my own home web-server, both for fun and for the learning experience. I would like to know the expenses involved, including: electricity costs (greater than light bulb?) internet costs (will I have to upgrade my internet? Or is 3-5Mbps upload speed fine for a web server with medium amount of traffic? Would I have to get a separate internet connection?) other unknown expenses Consider that I will configure the web server myself, so that is not an expense. Also consider that I already have a computer (year-old Dell laptop, 15R) to use to be dedicated as the web server.

    Read the article

  • wired connection not working in ubuntu 12.04 on lenovo G580 laptop

    - by shravankumar
    I found solution in http://www.zyxware.com/articles/2680/solved-wired-connection-eth0-not-detected-in-ubuntu-12-04 I downloaded compact-wireless-2012-07-03-p.tar.bz2 Here the steps i followed along with output 1. shravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ scripts/driver-select alx Output: Processing new driver-select request... Backup exists: Makefile.bk Backup exists: Makefile.bk Backup exists: drivers/net/ethernet/broadcom/Makefile.bk Backup exists: drivers/net/ethernet/atheros/Makefile.bk Backup exists: Makefile.bk Backup exists: Makefile.bk Backup exists: drivers/net/ethernet/broadcom/Makefile.bk 2.shravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ make output: make -C /lib/modules/3.2.0-23-generic/build M=/home/shravankumar/Desktop/compat-wireless-2012-07-03-p modules make[1]: Entering directory `/usr/src/linux-headers-3.2.0-23-generic' scripts/Makefile.build:44: /home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros/alx/Makefile: No such file or directory make[4]: *** No rule to make target `/home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros/alx/Makefile'. Stop. make[3]: *** [/home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros/alx] Error 2 make[2]: *** [/home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros] Error 2 make[1]: *** [_module_/home/shravankumar/Desktop/compat-wireless-2012-07-03-p] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-23-generic' make: *** [modules] Error 2 3. hravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ make install output: FATAL: Could not open /lib/modules/3.2.0-23-generic/modules.dep.temp for writing: Permission denied make: *** [uninstall] Error 1 4. shravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ modeprobe alx output: No command 'modeprobe' found, did you mean: Command 'modprobe' from package 'module-init-tools' (main) modeprobe: command not found I am new to Ubuntu ,Please help me. Thanks in advance

    Read the article

  • Awesome Bookmarklet Collection Ready to Select from and Add to Your Browser

    - by Asian Angel
    Bookmarklets are extremely useful additions to have for your everyday browsing needs without the hassle (or slowdown effect) of extensions. With that in mind tech blog Guiding Tech has put together a terrific collection of 21 bookmarklets that are ready to add to your favorite browser. Just scroll down and select/install the bookmarklets you like from the blog post and enjoy the enhanced browsing! You can see the beginning and end results from our sample use of the Search Site Bookmarklet in the screenshots above and below… Note: We altered the bookmarklet slightly to focus the search results through Google Singapore. How to Stress Test the Hard Drives in Your PC or Server How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit

    Read the article

  • Web standards or risk avoidance?

    - by Junior Dev
    My company is building an App Engine application. The app encounters a bug (possibly due to an issue with App Engine itself, as per our research) on IE9, but it cannot be reliably reproduced and is experienced by a small percentage of users. The workaround is to force IE9 to use IE8 mode. As a lazy front end developer (who doesn't like CSS hacks, shims and polyfills) I think it's OK to at least try going back to IE9 mode and see what happens, while we're still in private beta. The senior engineer (being more pragmatic) would rather that we continue forcing IE9 users to use the older IE8 mode. Who is right?

    Read the article

  • What should we tell our unsupported IE6 users?

    - by Dan Fabulich
    In the upcoming version of our web app, we've broken IE6, and we don't intend to fix it. We've had a clear warning posted for IE6 users for some months; we've decided it's time not to support it. My question is: how should we communicate this to our users? Some people here feel that we should block IE6 users who would try to access the web app, because it's not going to work for them. Others feel that we should just leave up a warning, saying "This doesn't work in IE6," but not block them; instead, if they click to dismiss the warning, just let them in to the broken site to see for themselves that it doesn't work. Who is right? Is there a better way?

    Read the article

  • Wired Network not working on Ubuntu 11.10 + Strange Behavior with Manual Conf

    - by Mauricio Cruz
    I'm new to Ubuntu - to be honest this is my very first day trying it... and I've already spent hours trying to make my wired connection work. I've been using this wired network with Windows and OSX, and in both systems I also had some trouble trying to connect in the past (and the troubleshooters did their magic and helped me get connected). Today, this is what I got: I'm running Ubuntu 11.10; ifconfig: eth0 Link encap:Ethernet HWaddr 78:2b:cb:c3:bf:8f UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:0 overruns:0 frame:0 TX packets:343 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:70 (70.0 B) TX bytes:63273 (63.2 KB) Interrupt:20 Memory:e2e00000-e2e20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1859 errors:0 dropped:0 overruns:0 frame:0 TX packets:1859 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:149368 (149.3 KB) TX bytes:149368 (149.3 KB) wlan0 Link encap:Ethernet HWaddr 10:0b:a9:82:55:c0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:15484 errors:0 dropped:0 overruns:0 frame:0 TX packets:16871 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:12048377 (12.0 MB) TX bytes:2677679 (2.6 MB) I also have some information from Windows ipconfig /all that I ran at my friend's machine Ipv6 Address: <address> preferential Ipv4 Address: 172.26.65.23 <preferential> Netmask: 255.255.254.0 Default Gateway: 172.26.64.1 DHCP Server : <address> DNS Servers : <address> DNS Suffix : <suffix> The weird thing is that I've tried to configure everything manually, using "Network Connections". When I add everything inside IPv4 Settings, the connection is finally successful, but only for 4~5 seconds before getting disconnected again... Update:I just changed the Connection Method to "Local-Link Only", and the same described above happens: At first, it says "Connection Stablished", but after a few seconds, the wired network gets disconnected. I hope someone can help me get connected! Thanks!

    Read the article

  • Equivalent to Freedom and/or Anti-Social?

    - by mummey
    Freedom: http://macfreedom.com/ Anti-Social: http://anti-social.cc/ Simply put: Where can I find a equivalent to either-or/both these apps? Note: Part of the appeal of these apps is allowing the user to explicitly make it extra difficult to re-enable these services. Unplugging the network cable might seem to achieve the same results from an glance, but the added difficulty in re-enabling those services is what makes these apps valuable.

    Read the article

  • ASP.NET developers build rich management system using the VWG extension

    - by Visual WebGui
    When The Center for Organ Recovery & Education (CORE) decided they needed a web application to allow easy access to the expenses management system they initially went to ASP.NET web forms combined with CSS. The outcome, however, was not satisfying enough as it appeared bland and lacked in richness. So in order to enrich the UI and give the web application some glitz, Visual WebGui was selected. Visual WebGui provided the needed richness and the familiar Windows look and feel also made the transition...(read more)

    Read the article

  • Firefox clones for Ubuntu

    - by cipricus
    In Windows I use, beside the main Firefox installation, one or even two "Firefox clones" for different purposes (specifically oriented addons and configurations, light configuration without addons, configuration for a different user, etc). A clone of Firefox is a browser that is identical to Firefox except the name. (It may have more - but not less - features than FF and it must be installable beside Firefox, not on top/instead of it. So, a clone is not a replacement/exclusive alternative of FF: in the way Swiftfox is, taking all previous Firefox extensions and configuration.) For example, in Windows, Pale Moon, Cometbird and Wyzo are FF clones (but they do not have Linux support). Basically, Flock browser would also qualify, and it had support for Linux: but it was discontinued. What remains as closest to being a full clone is Seamonkey, has support for Linux, but it is not a complete clone (although it can use a lot of FF extensions): themes are not working, the interface is in general different and rather primitive. It has the merit of keeping the pace with FF 4+ (in contrast with Swiftweasel, for example.) Are such more browsers available in Ubuntu? (As for comments asking why I "really" need these clones, I am just used to doing that, I like two separate Firefox-like browsers: why pleasure, just like curiosity, would not be enough??)

    Read the article

  • How to protect a peer-to-peer network from inappropriate content?

    - by Mike
    I’m developing a simple peer-to-peer app in .Net which should enable users to share specific content (text and picture files). As I've learned with my last question, inappropriate content can “relatively” easily be identified / controlled in a centralized environment. But what about a peer-to-peer network, what are the best methods to protect a decentralized system from unwanted (illegal) content? At the moment I only see the following two methods: A protocol (a set of rules) defines what kind of data (e.g. only .txt and jpg-files, not bigger than 20KB etc.) can be shared over the p2p-network and all clients (peers) must implement this protocol. If a peer doesn’t, it gets blocked by other peers. Pro: easy to implement. Con: It’s not possible to define the perfect protocol (I think eMail-Spam filters have the same problem) Some kind of rating/reputation system must be implemented (similar to stackoverflow), so “bad guys” and inappropriate content can be identified / blocked by other users. Pro: Would be very accurate. Con: Would be slow and in my view technically very hard to implement. Are there other/better solutions? Any answer or comment is highly appreciated.

    Read the article

  • IE9 Loses Some CSS After Particular Form Submit [migrated]

    - by Asherion
    The site I am editing has a search form. For the record, there are several other forms on the site, contact and the like. This is the only one with an issue. Upon submission of the form, SOME of the styling is lost in IE9 (possibly other versions of IE, haven't tested that yet). Primarily, the margins and colors set in html and body appear to have been lost. Menus, banner, text, etc all appear to retain styles. All styles are on one sheet, that are used here... Any helpful advice? Here is the contents of the search page and the php used to check for the form, if that helps, and the css that I think is lost. THE HTML: <div id="search"> <br /> <div style="float:right;font-size:.8em;"> <form name="form_sidesearch" action="search.html" method="post"> <input type="hidden" name="action" value="search" /> <input type="text" name="search_value" value="<?php echo $systems_primary->search_value ?>" /> <input type="submit" name="submit_search" value="Search Website" /> </form> <br /> </div> </div> <?php echo stripslashes($search_results); THE PHP: <?php // -- Begin Search -------------------------------------------------------------------------------------- if($_REQUEST["action"] === "search") { if(strlen($_REQUEST["pg"]) <= 0) { $_REQUEST["pg"] = 1; } $search_results = $systems_primary->search_website("index",urldecode($_REQUEST["search_value"]),"<div class=\"listing ui-corner-all\"><a href=\"{ENTRY_URL}\" title=\"{ENTRY_TITLE}\" class=\"listing_title\">{ENTRY_TITLE}</a>{ENTRY_CONTENT} <a href=\"{ENTRY_URL}\" title=\"{ENTRY_TITLE}\" style=\"font-size:.8em;\">...read more</a></div><br /><br />",345,"all",10,$_REQUEST["pg"]); } // -- End Search ---------------------------------------------------------------------------------------- ?> THE LOST CSS (could be more): html { background-color:#F6E6C8; font-size:16px; font:Helvetica; } body { width:1027px; margin:0 auto; background-color:#ffffff; font: arial, times new roman, sans-serif; }

    Read the article

  • Missing Wireless access point

    - by nvcnvn
    I have an: Ubuntu 12.04 with proprietary Boardcom STA Wireless driver installed BCM43224 802.11a/b/g/n wireless card TP-LINK TD-W8101G 54Mbps Wireless ADSL2+ Modem Router Yesterday before I went to sleep, I still connect to my wireless access point, this morning when I start my laptop I don't see it in the list - there are some neighbors listed but not mine. The WLAN is green, with my old Nokia E72, I still see my access point with 100% signal. I have tried to restart my laptop and turn the firmware off/on by the switch but no help. I have read the WirelessTroubleShootingGuide but I can do anything. Here is some of my card info: *-network description: Wireless interface product: BCM43224 802.11a/b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: c0:cb:38:06:5d:53 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 03 serial: f0:4d:a2:42:ab:e4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:5000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff memory:f0420000-f043ffff

    Read the article

  • 10.10 - No wired connection (cable plugged)

    - by Roland Burda
    So, my problem is that I have a recently bought laptop (Dell Inspiron M5040) with Ubuntu 10.10 installed on it, and the wired connection isn't working. The wireless connection is ok, it works. But the LAN isn't being recognized when the cable is plugged in. I've found an article, but I'm not sure whether it is a good approach for my case: http://www.zyxware.com/articles/2680/solved-wired-connection-eth0-not-detected-in-ubuntu-12-04

    Read the article

  • Needs free/ opensource network monitoring tool for office LAN

    - by Amit Ranjan
    I know there must be a lot similar questions on SU. Let me explain my setup first. I have 4-5 PC, Laptops and Few Android Phones in my office. To get them on a network , I have a UTStarCom, WA3002G1 ADSL2+ router with a landline broadband connection which has nothing to do with any PC except the configuration settings. Broadband channel is always on, we need to switch on the router and the internet is ready for us. No Internet Connection sharing is done via any PC. I have a limited 20GB monthly plan, which is consumed in 10-20 days, depending upon the download requirements. So in the above case, i need some suggestions from you: How do I monitor my Internet Bandwidth along-with the connected systems, realtime? Any free opensource tool available? Tweaks / Changes in PC to save bandwidth as my ISP do not have any Unlimited plan. PC and Laptops are Windows XP and/Or windows 7. Either of the platform tools are welcome.

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >