Search Results

Search found 170919 results on 6837 pages for 'not so sharp'.

Page 84/6837 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• Resized Ubuntu 14.04 partition will not boot

  - by user292577

  First, a little background info: I intended to install Ubuntu alongside OS X, but I accidentally erased my entire hard drive and was left with Ubuntu alone. Yesterday, I finally tried to create a desperate partition and OS X. I successfully shrank my Ubuntu partition and created ~40 GB of free space. I used gparted to do this. At first I tried to use Internet Recovery to install OS X on the unallocated space I had created, but discovered I couldn't. I went back to gparted and created a FAT partition with that space. I'm pretty sure I actually did this using my Ubuntu partition on my hard drive (the one I had just shrunken), rather than the USB live boot I had used to shrink it. Therefore, at this point, I think my Ubuntu partition was still functioning properly. I went back to internet recovery and used disk utility to turn the FAT partition into a Mac OS Extended (Journaled) [HFS/HFS+] partition. I believe this is probably where the problem occurred. I successfully reinstalled OS X and found it to be fully functioning. However, when I tried to boot back into the Ubuntu partition all I got was a black screen with a little white cursor (it looks similar to a terminal screen/the Mac DFU mode, but I can't type anything into it. Is there anything I can do to repair my Ubuntu partition? If not, can I at least recover the data from it? Thank you for any help.

  Read the article

• ubuntu 12.04 will not play DVDs

  - by ayelet

  First off, I'm not just a newbie, I'm clueless! So your answers will need to be in complete idiot language (let's say I'm computer saavy, and I can follow directions,but I've never programmed anything and assume I don't understand any abbreviations. So why am I running linux? b/c windows was driving me nuts!! and my friend convinced me. day-to-day operations, we're doing fine, but when it comes to problems, I've got no clue what I'm doing!) So here's what's going on, my machine is an HP pavilion dv6, my optical drive is a standard cd/dvdrw, when i load an audio cd of any type (burned, official, etc,..) I have no problems, when I pop in a dvd - i get nothing. the dvd icon comes up in my launch tray, when I open VLC player I can find the dvd in the folder... but it won't play. I can watch movies I've downloaded with no problem, I can also watch movies off an external hard drive. The only thing I've tried is removing vlc and reinstalling, and I tried installing a different player (gnome maybe? I don't remember). none of that worked. Again, i can follow directions, but you need to be very specific and don't assume I know anything going in. (I mean, I know basic stuff, but nothing too technical.) PLEASE HELP!!! MY KIDS ARE DRIVING ME CRAZY!!! Thanks!!

  Read the article

• I have just upgraded to 13.10 and i can not install any programs

  - by jason malitz

  I upgraded to Ubuntu 13.10 last night and i tried to install empathy chat client and this is what I see after the failed down load installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 397719 files and directories currently installed.) Removing xserver-common-lts-raring ... Removing 'diversion of /usr/lib/xorg/protocol.txt to /usr/lib/xorg/protocol-precise.txt by xserver-common-lts-raring' dpkg-divert: error: rename involves overwriting `/usr/lib/xorg/protocol.txt' with different file `/usr/lib/xorg/protocol-precise.txt', not allowed dpkg: error processing xserver-common-lts-raring (--remove): subprocess installed post-removal script returned error exit status 2 No apport report written because MaxReports is reached already Errors were encountered while processing: xserver-common-lts-raring Error in function: So how do I fix this issue

  Read the article

• Bubble sorting my array does not sort it

  - by Trixmix

  I sort an array of chunks by doing this: for (int i =0; i<this.getQueue().size();i++) { for (int j =0; j<this.getQueue().size()-i-1;j++) { Chunk temp1 = this.getQueue().get(i); Chunk temp2 = this.getQueue().get(i+1); if (temp1 != null &&temp2 != null && temp2.getLocation().getY() < temp1.getLocation().getY()) { this.getQueue().set(i, temp2); this.getQueue().set(i+1, temp1); } } } What I want is the the chunks with the lowest Y coordinate will be at the start of the array and the ones with the bigger Y coordinate will be at the end of the array. And this is my result: 1024.0 944.0 1104.0 944.0 1104.0 ----BEFORE----- 944.0 1024.0 944.0 1104.0 1104.0 ---AFTER--- Why is this not working It seams fine. I dont want to use a comparator so dont suggest it. More info, the Y cords are floats. I got the result by for each looping on this queue and printed the Y locations.

  Read the article

• jquery is not working over local network [migrated]

  - by Kortyell Davis

  i have a fedora server running apache web server. the server is connected to a home network. i have a laptop connected to the same network. i can enter the ip address of my server into the browser of my laptop and pull up the index.html file located in the document root directory of the fedora home server. the index.html file contains jquery code. the jquery code only works when i open it locally in my browser (e.g. right click open with firefox), but when i attempt to view the webpage from my laptop the jquery code is not executed. the code is here below. <script type="text/javascript" src="jquery-1.8.2.js"></script> ' $(document).ready(function() { $('#form').hide(); $('input[type=text]').focus(function() { $(this).val(''); }); $('input[type=password]').focus(function() { $(this).val(''); }); $('.form').hide(); $('#log').click(function(){ $('#form').toggle(); }); $('#reg').click(function(){ $('.form').toggle(); }); });

  Read the article

• mod_rewrite not working after upgrade to 12.10

  - by CrowderSoup

  I'm hoping this is a quick and simple fix and that I just need a fresh set of eyes. However, I'm fearful that it might actually be an error in the latest build of the rewrite module. I have a .htaccess file that turns on the rewrite engine (I've made sure the module is enabled), creates some rewrite conditions, and finally a rewrite rule. Here's my .htaccess file for reference: <IfModule mod_rewrite.c> RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?request=$1 [L,QSA,NC] </IfModule> Now for the problem: if I go to hostname.com it works fine. If I go to hostname.com/Index it works fine. However, if I go to hostname.com/index it doesn't rewrite the request and I get a 404. I'm not sure what's going on here. I've used a rewrite rule tester and there doesn't appear to be any issues with my rewrite rule itself. Again, this issue didn't manifest until after I upgraded to 12.10, at which point I know that Apache was updated. Any thoughts? Has anyone else here experienced this? I know that two other people besides myself have experienced this here. Thanks in advance for any help you can provide!

  Read the article

• Do not use “using” in WCF Client

  - by oazabir

  You know that any IDisposable object must be disposed using using. So, you have been using using to wrap WCF service’s ChannelFactory and Clients like this: using(var client = new SomeClient()) {. ..} Or, if you are doing it the hard and slow way (without really knowing why), then: using(var factory = new ChannelFactory<ISomeService>()) {var channel= factory.CreateChannel();...} That’s what we have all learnt in school right? We have learnt it wrong! When there’s a network related error or the connection is broken, or the call is timed out before Dispose is called by the using keyword, then it results in the following exception when the using keyword tries to dispose the channel: failed: System.ServiceModel.CommunicationObjectFaultedException : The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Server stack trace: at System.ServiceModel.Channels.CommunicationObject.Close(TimeSpan timeout) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at System.ServiceModel.ICommunicationObject.Close(TimeSpan timeout) at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Close(TimeSpan timeout) at System.ServiceModel.ClientBase`1.Close() at System.ServiceModel.ClientBase`1.System.IDisposable.Dispose() There are various reasons for which the underlying connection can be at broken state before the using block is completed and the .Dispose() is called. Common problems like network connection dropping, IIS doing an app pool recycle at that moment, some proxy sitting between you and the service dropping the connection for various reasons and so on. The point is, it might seem like a corner case, but it’s a likely corner case. If you are building a highly available client, you need to treat this properly before you go-live. So, do NOT use using on WCF Channel/Client/ChannelFactory. Instead you need to use an alternative. Here’s what you can do: First create an extension method. public static class WcfExtensions{ public static void Using<T>(this T client, Action<T> work) where T : ICommunicationObject { try { work(client); client.Close(); } catch (CommunicationException e) { client.Abort(); } catch (TimeoutException e) { client.Abort(); } catch (Exception e) { client.Abort(); throw; } }} Then use this instead of the using keyword: new SomeClient().Using(channel => { channel.Login(username, password);}); Or if you are using ChannelFactory then: new ChannelFactory<ISomeService>().Using(channel => { channel.Login(username, password);}); Enjoy!

  Read the article

• Is Your ASP.NET Development Server Not Working?

  - by Paulo Morgado

  Since Visual Studio 2005, Visual Studio comes with a development web server: the ASP.NET Development Server. I’ve been using this web server for simple test projects since than with Visual Studio 2005 and Visual Studio 2008 in Windows XP Professional on my work laptop and Windows XP Professional, Windows Vista 64bit Ultimate and Windows 7 64bit Ultimate at my home desktop without any problems (apart the known custom identity problem, that is). When I received my new work laptop, I installed Windows Vista 64bit Enterprise and Visual Studio 2008 and, for my surprise, the ASP.NET Development Server wasn’t working. I started looking for differences between the laptop environment and the desktop environment and the most notorious differences were: System Laptop Desktop SKU Windows Vista 64bit Enterprise Windows Vista 64bit Ultimate Joined to a Domain Yes No Anti-Virus McAffe ESET After asserting that no domain policies were being applied to my laptop and domain user and nothing was being logged by the ant-virus, my suspicions turned to the fact that the laptop was running an Enterprise SKU and the desktop was running an Ultimate SKU. After having problems with other applications I was sure that problem was the Enterprise SKU, but never found a solution to the problem. Because I wasn’t doing any web development at the time, I left it alone. After upgrading to Windows 7, the problem persisted but, because I wasn’t doing any web development at the time, once again, I left it alone. Now that I installed Visual Studio 2010 I had to solve this. After searching around forums and blogs that either didn’t offer an answer or offered very complicated workarounds that, sometimes, involved messing with the registry, I came to the conclusion that the solution is, in fact, very simple. When Windows Vista is installed, hosts file, according to this contains this definition: 127.0.0.1 localhost ::1 localhost This was not what I had on my laptop hosts file. What I had was this: #127.0.0.1 localhost #::1 localhost I might have changed it myself, but from the amount of people that I found complaining about this problem on Windows Vista, this was probably the way it was. The installation of Windows 7 leaves the hosts file like this: #127.0.0.1 localhost #::1 localhost And although the ASP.NET Development Server works fine on Windows 7 64bit Ultimate, on Windows 7 64bit Enterprise it needs to be change to this: 127.0.0.1 localhost ::1 localhost And I suspect it’s the same with Windows Vista 64bit Enterprise.

  Read the article

• Fan not working on thinkpad L430, laptop overheating

  - by Dirk B.

  I'm having problems controlling the fan of my Lenovo Thinkpad L430. The fan doesn't start. Without any fan control installed the fan just doesn't run. If I run stress, it does run a little, but it's nowhere near the speed it should be. After a while, the laptop just overheats and stops. I Tried to install tp-fancontrol, and enabled thinkpad_acpi fancontrol=1, but to no avail. If I try to set the fan speed manually, it doesn't start up. In windows, there's a program called TPFanControl. It turns out that this laptop uses a different scheme to control the fan than other thinkpads. The level runs from 0 to 255, and max = 0 and min=255. Now I'm looking for a fan control program that works for linux. Does anyone know if it actually exists? Anyone with any experience on fan control on a L430? Update: sudo pwmconfig gives the following output: # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. Found the following devices: hwmon0 is acpitz hwmon1/device is coretemp hwmon2/device is thinkpad Found the following PWM controls: hwmon2/device/pwm1 hwmon2/device/pwm1 is currently setup for automatic speed control. In general, automatic mode is preferred over manual mode, as it is more efficient and it reacts faster. Are you sure that you want to setup this output for manual control? (n) y Giving the fans some time to reach full speed... Found the following fan sensors: hwmon2/device/fan1_input current speed: 0 ... skipping! There are no working fan sensors, all readings are 0. Make sure you have a 3-wire fan connected. You may also need to increase the fan divisors. See doc/fan-divisors for more information. regards, Dirk

  Read the article

• Implicit Intent is not working [migrated]

  - by Sayem Siam

  I have a activity class named Notelist.In the Notelist class i have tried to insert a new note.For that i have used implicit Intent.But when i click to insert a new note it gives a run time error. public boolean onOptionsItemSelected(MenuItem item) { switch (item.getItemId()) { case R.id.menu_add: Log.d("sayem", "in case of fd"); Toast.makeText(this, "in the", Toast.LENGTH_LONG).show(); startActivity(new Intent(Intent.ACTION_INSERT, getIntent() .getData())); break; default: throw new IllegalArgumentException("not matched"); } return true; } And i have NoteEditor activity clas to Insert a new note. And here is my Androidmanifesto.xml file. <uses-sdk android:minSdkVersion="14" /> <application android:icon="@drawable/ic_launcher" android:label="@string/app_name" > <activity android:label="@string/app_name" android:name=".NotesList" > <intent-filter > <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> <intent-filter> <action android:name="android.intent.action.VIEW" /> <action android:name="android.intent.action.EDIT" /> <action android:name="android.intent.action.PICK" /> <category android:name="android.intent.category.DEFAULT" /> <data android:mimeType="vnd.android.cursor.dir/vnd.google.note" /> </intent-filter> <intent-filter > <action android:name="android.intent.action.GET_CONTENT" /> <category android:name="android.intent.category.DEFAULT" /> <data android:mimeType="vnd.android.cursor.item/vnd.google.note" /> </intent-filter> </activity> <activity android:name="NoteEditor" > <intent-filter> <action android:name="NoteEditor"></action> <action android:name="android.intent.action.INSERT" /> <action android:name="android.intent.action.PASTE" /> <category android:name="android.intent.category.DEFAULT" /> <data android:mimeType="vnd.android.cursor.dir/vnd.google.note" /> </intent-filter> </activity> </application>

  Read the article

• Not Dead, Just Busy

  - by MOSSLover

  So I didn’t die in a freak smelting accident yet, but I have been dealing with a lot of different things.  I had to take a bit of a break to deal with the cat death issue.  I am not fully recovered, because well it just happened a few months ago.  It kind of sucked.  Plus the apartment feels a lot bigger. Then you have the whole New York Comic Con thing where I had to plan some cosplay costumes.  I have been trying to find time to hang out with friends and have a social life.  That plus I built an entire presentation for iOS development for New York Code Camp.  I am also planning a couple MS Community dinners (namely one a week from Tuesday) plus a give camp.  I am also planning a vacation around SPS UK plus I will be at SPC.  Life is just incredibly hectic and when you factor in dating to the mix it’s gotten insane to the point where some day I just have to go dark.  Hence the lack of blogging.  I am just trying to keep up with everything and everyone without losing myself. If you guys will be at SPC or SPS UK I will be at both places this year.  Stop by the Planet Technologies booth and see me or I’ll be around somewhere.  I am really sorry if I don’t remember you from an event or if you are someone following me on twitter.  I am trying to get better at the mnemonic memory devices, but I think things broke down around the 47th event I attended or spoke at or something to that nature.  If anyone wants to talk to Cathy, Lori, or I about Women in SharePoint definitely find us at the event.  Anyway good night and good luck guys.  I promise to check back at least once before the year ends.  In the meantime twitter stalking is always possible.  Sometimes I even respond back. Technorati Tags: SPC,SPS UK,NYCC,NYC Code Camp,MOSSLover

  Read the article

• DELL Inspiron 9400 SD Card Reader not working on 10.11 ubuntu

  - by Mario Martz

  Im new in linux, just installed Ubuntu 11.10 in a Dell Inspiron 9400, everything works fine with the exception of the SD card reader, everytime I insert a card the computer doesnt do anything, its like the SD card reader is not there. I did a $lspci and it shows the next drivers 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Everytime I insert a memory card, dmesg shows the next d status 0x600b00 [ 2687.227351] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.229436] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.229440] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.230512] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.230515] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.231588] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.231592] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.232674] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.232678] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.234763] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.234766] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.236864] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.236868] end_request: I/O error, dev mmcblk0, sector 70 [ 2687.238942] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.238946] end_request: I/O error, dev mmcblk0, sector 71 [ 2687.238949] Buffer I/O error on device mmcblk0, logical block 8 [ 2687.241028] mmcblk0: retrying using single block read [ 2687.243104] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.243108] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.245212] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.245215] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.247298] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.247302] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.248389] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.248393] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.250476] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.250480] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.252617] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.252621] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.254737] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 and more of the same but with different sector number Im using Kernel 3.0.0-12-generic By the way, when I was installing it and ubuntu asks about installation (If I want to install it along with windows or delete something or change the partitions of the HDD) if I go to the window to change the partition of the disc, linux detects the SD Card (if there's one inserted course). Any help with this it would be appreciated -sorry for my english Thank you

  Read the article

• Textures do not render on ATI graphics cards?

  - by Mathias Lykkegaard Lorenzen

  I'm rendering textured quads to an orthographic view in XNA through hardware instancing. On Nvidia graphics cards, this all works, tested on 3 machines. On ATI cards, it doesn't work at all, tested on 2 machines. How come? Culling perhaps? My orthographic view is set up like this: Matrix projection = Matrix.CreateOrthographicOffCenter(0, graphicsDevice.Viewport.Width, -graphicsDevice.Viewport.Height, 0, 0, 1); And my elements are rendered with the Z-coordinate 0. Edit: I just figured out something weird. If I do not call this spritebatch code above doing my textured quad rendering code, then it won't work on Nvidia cards either. Could that be due to culling information or something like that? Batch.Instance.SpriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.LinearClamp, DepthStencilState.Default, RasterizerState.CullNone); ... spriteBatch.End(); Edit 2: Here's the full code for my instancing call. public void DrawTextures() { Batch.Instance.SpriteBatch.Begin(SpriteSortMode.Texture, BlendState.AlphaBlend, SamplerState.LinearClamp, DepthStencilState.Default, RasterizerState.CullNone, textureEffect); while (texturesToDraw.Count > 0) { TextureJob texture = texturesToDraw.Dequeue(); spriteBatch.Draw(texture.Texture, texture.DestinationRectangle, texture.TintingColor); } spriteBatch.End(); #if !NOTEXTUREINSTANCING // no work to do if (positionInBufferTextured > 0) { device.BlendState = BlendState.Opaque; textureEffect.CurrentTechnique = textureEffect.Techniques["Technique1"]; textureEffect.Parameters["Texture"].SetValue(darkTexture); textureEffect.CurrentTechnique.Passes[0].Apply(); if ((textureInstanceBuffer == null) || (positionInBufferTextured > textureInstanceBuffer.VertexCount)) { if (textureInstanceBuffer != null) textureInstanceBuffer.Dispose(); textureInstanceBuffer = new DynamicVertexBuffer(device, texturedInstanceVertexDeclaration, positionInBufferTextured, BufferUsage.WriteOnly); } if (positionInBufferTextured > 0) { textureInstanceBuffer.SetData(texturedInstances, 0, positionInBufferTextured, SetDataOptions.Discard); } device.Indices = textureIndexBuffer; device.SetVertexBuffers(textureGeometryBuffer, new VertexBufferBinding(textureInstanceBuffer, 0, 1)); device.DrawInstancedPrimitives(PrimitiveType.TriangleStrip, 0, 0, textureGeometryBuffer.VertexCount, 0, 2, positionInBufferTextured); // now that we've drawn, it's ok to reset positionInBuffer back to zero, // and write over any vertices that may have been set previously. positionInBufferTextured = 0; } #endif }

  Read the article

• Media keys play/pause globally worked in 12.10, not in 13.10

  - by Stéphane Gourichon

  Laptop media keys On Asus n55sf laptop, there are a dedicated keys for volume up, volume down, mute, [play/pause], stop, launch (plus a dozen Fn-key combinations). In 12.10 most worked. (Overall is seems unrelated to desktop environment used, stating it for the sake of completeness.) On Ubuntu 12.10 under XFCE they just worked. That is: when a player like rhythmbox or totem was started, it would alternate between play and pause. Interestingly, if several were started, they would alternate independently. E.g. use mouse to pause rhythmbox, launch totem, and one hit on [play/pause] key would pause one and resume the other. Keys Next,Previous and Stop worked as expected in any program. In 13.10 most still work, but play/skip related ignored. On Xubuntu 13.10 (XFCE too) the volume keys work but the [play/pause], stop, next and prev are ignored. Not tried regular Ubuntu 13.10 (Unity). Search before you ask Here are a few facts: https://wiki.ubuntu.com/Hotkeys/Architecture is ummutable and mentions Ubuntu 9.10. https://wiki.ubuntu.com/Hotkeys/Troubleshooting is also outdated as it mentions /usr/share/doc/udev/README.keymap.txt which no longer exists. On 12.10 and 13.10 versions, at XFCE level (as visible by xfconf-query or using xfce4-settings-manager) there are a couple of shortcut for keys like XF86Calculator or XF86TouchpadToggle but nothing related to volume prev/next/play/stop, which is okay. XF86Audio substring doesn't appear in /etc (which is normal) Kernel-level test: "showkey -s" on console shows that keys Next,Play/Pause,Previous,Stop are keycodes 163,164,165,166. Nothing relevant in /etc about that. Reports https://bugs.launchpad.net/ubuntu/+source/udev/+bug/1072371 and https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1012365 suggest to adjust at udev level. Alas, the udev tutorials I found ( e.g. https://wiki.debian.org/udev ) don't even mention keyboard. A thread in french seems to deal with a similar issue: https://forum.ubuntu-fr.org/viewtopic.php?id=1395051. @sudo evtest /dev/input/event3@, in X as well as on plain console, reports events on key pressed and repeats, but nothing when pressing those media keys. Is udev a dead end ? Questions How did it work in 12.10 ? Through udev ? Something else ? Any other hint ?

  Read the article

• Finance: Friends, not foes!

  - by red@work

  After reading Phil's blog post about his experiences of working on reception, I thought I would let everyone in on one of the other customer facing roles at Red Gate... When you think of a Credit Control team, most might imagine money-hungry (and often impolite) people, who will do nothing short of hunting people down until they pay up. Well, as with so many things, not at Red Gate! Here we do things a little bit differently.   Since joining the Licensing, Invoicing and Credit Control team at Red Gate (affectionately nicknamed LICC!), I have found it fantastic to work with people who know that often the best way to get what you want is by being friendly, reasonable and as helpful as possible. The best bit about this is that, because everyone is in a good mood, we have a great working atmosphere! We are definitely a very happy team. We laugh a lot, even when dealing with the serious matter of playing table football after lunch. The most obvious part of my job is bringing in money. There are few things quite as satisfying as receiving a big payment or one that you've been chasing for a long time. That being said, it's just as nice to encounter the companies that surprise you with a payment bang on time after little or no chasing. It's always a pleasure to find these people who are generous and easy to work with, and so they always make me smile, too. As I'm in one of the few customer facing roles here, I get to experience firsthand just how much Red Gate customers love our software and are equally impressed with our customer service. We regularly get replies from people thanking us for our help in resolving a problem or just to simply say that they think we're great. Or, as is often the case, that we 'rock and are awesome'! When those are the kinds of emails you have to deal with for most of the day, I would challenge anyone to be unhappy! The best thing about my work is that, much like Phil and his counterparts on reception, I get to talk to people from all over the world, and experience their unique (and occasionally unusual) personality traits. I deal predominantly with customers in the US, so I'll be speaking to someone from a high flying multi-national in New York one minute, and then the next phone call will be to a small office on the outskirts of Alabama. This level of customer involvement has led to a lot of interesting anecdotes and plenty of in-jokes to keep us amused! Obviously there are customers who are infuriating, like those who simply tell us that they will pay "one day", and that we should stop chasing them. Then there are the people who say that they ordered the tools because they really like them, but they just can't afford to actually pay for them at the moment. Thankfully these situations are relatively few and far between, and for every one customer that makes you want to scream, there are far, far more that make you smile!

  Read the article

• PHP `virtual()` with Apache MultiViews not working after upgrade to 12.04

  - by Izzy

  I use PHP's virtual() directive quite a lot on one of my sites, including central elements. This worked fine for the last ~10 years -- but after upgrading to 12.04 it somehow got broken. Example setup (simplified) To make it easier to understand, I simplify some things (contents). So say I need a HTML fragment like <P>For further instructions, please look <A HREF='foobar'>here</P> in multiple pages. 10 years ago, I used SSI for that, so it is put into a file in a central place -- so if e.g. the targeted URL changes, I only need to update it in one place. To serve multiple languages, I have Apache's MultiViews enabled -- and at $DOCUMENT_ROOT/central/ there are the files: foobar.html (English variant, and the default) foobar.html.de (German variant). Now in the PHP code, I simply placed: <? virtual("/central/foobar"); ?> and let Apache take care to deliver the correct language variant. The problem As said, this worked fine for about 10 years: German visitors got the German variant, all others the English (depending on their preferred language). But after upgrading to Ubuntu 12.04, it no longer worked: Either nothing was delivered from the virtual() command, or (in connection with framesets) it even ended up in binary gibberish. Trying to figure out what happens, I played with a lot of things. I first thought MultiViews was (somehow) not available anymore -- but calling http://<server>/central/foobar showed the right variant, depending on the configured language preferences. This also proved there was nothing wrong with file permissions. The error.log gave no clues either (no error message thrown). Finally, just as a "last ressort", I changed the PHP command to <? virtual("central/foobar.html"); ?> -- and that very same file was in fact included. But the language dependend stuff obviously did no longer work. Of course I tried to find some change (most likely in PHP's virtual() command), using Google a lot, and also searching the questions here -- unfortunately to no avail. Finally: The question Putting "design questions" aside (surely today I would design things differently -- but at least currently I miss the time to change that for a quite huge amount of pages): What can be done to make it work again? I surely missed something -- but I cannot figure out what...

  Read the article

• Ubuntu 12.10 Trackpoint not detected Thinkpad X130e

  - by killerknives

  I just did a fresh install of 12.10 and now only my touchpad works. The trackpoint and Left/Right buttons below the trackpoint do not work. The trackpoint worked fine as of 12.04. I've searched online and there was a hack that said that disabling the touchpad would enable the trackpoint. WRONG! You'll end up having to use the keyboard =/. I don't know what is needed so I'll just dump some stuff. lspci: 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port 00:06.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port 00:07.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) I've installged gpointing-device-setting and it only lists the touchpad. No trackpoint. What should I do? What data do you need?

  Read the article

• Suspend not working after kernel update on an HP Envy14 1050

  - by leoxweb

  I just update ubuntu 12.04 to the kernel 3.2.0-30 and together with it a lot of packeges in the system. I am running it on an HP Envy14 1050. When I first made a fresh install of the clean ubuntu 12.04 I had the problem that when restoring from suspend the screen was black, although some backlight was there. I could fix it following this https://bugs.launchpad.net/ubuntu/+source/linux/+bug/989674/comments/20. Now, after the update the black screen after suspend has reappeared but with no backlight at all and the led in the caps lock key blinking. The laptop is using a ATI radeon 5600 with the privative drivers. During the update process there was an error with depmod . You can see the /var/log/dist-upgrade/apt-term.log file at the end. UPDATE: suspend is not working at all. The problem is not when restoring from suspend, but when I try to suspend the system it gets blocked and the fan running. Only option is to press power button. Log started: 2012-09-12 00:46:46 (Reading database ... 198909 files and directories currently installed.) Removing icedtea-7-jre-cacao ... Selecting previously unselected package linux-image-3.2.0-30-generic. (Reading database ... 198901 files and directories currently installed.) Unpacking linux-image-3.2.0-30-generic (from .../linux-image-3.2.0-30-generic_3.2.0-30.48_amd64.deb) ... Done. Preparing to replace icedtea-7-jre-jamvm 7~u3-2.1.1~pre1-1ubuntu3 (using .../icedtea-7-jre-jamvm_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement icedtea-7-jre-jamvm ... Preparing to replace openjdk-7-jre-lib 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jre-lib_7u7-2.3.2-1ubuntu0.12.04.1_all.deb) ... Unpacking replacement openjdk-7-jre-lib ... Preparing to replace openjdk-7-jre-headless 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jre-headless_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-7-jre-headless ... Preparing to replace python-problem-report 2.0.1-0ubuntu12 (using .../python-problem-report_2.0.1-0ubuntu13_all.deb) ... Unpacking replacement python-problem-report ... Preparing to replace python-apport 2.0.1-0ubuntu12 (using .../python-apport_2.0.1-0ubuntu13_all.deb) ... Unpacking replacement python-apport ... Preparing to replace apport 2.0.1-0ubuntu12 (using .../apport_2.0.1-0ubuntu13_all.deb) ... apport stop/waiting Unpacking replacement apport ... Preparing to replace apport-gtk 2.0.1-0ubuntu12 (using .../apport-gtk_2.0.1-0ubuntu13_all.deb) ... Unpacking replacement apport-gtk ... Preparing to replace firefox-globalmenu 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-globalmenu_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-globalmenu ... Preparing to replace firefox 15.0+build1-0ubuntu0.12.04.1 (using .../firefox_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox ... Preparing to replace firefox-gnome-support 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-gnome-support_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-gnome-support ... Preparing to replace firefox-locale-en 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-locale-en_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-locale-en ... Preparing to replace firefox-locale-es 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-locale-es_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-locale-es ... Preparing to replace firefox-locale-zh-hans 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-locale-zh-hans_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-locale-zh-hans ... Preparing to replace totem-mozilla 3.0.1-0ubuntu21 (using .../totem-mozilla_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement totem-mozilla ... Preparing to replace libtotem0 3.0.1-0ubuntu21 (using .../libtotem0_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement libtotem0 ... Preparing to replace totem-plugins 3.0.1-0ubuntu21 (using .../totem-plugins_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement totem-plugins ... Preparing to replace totem 3.0.1-0ubuntu21 (using .../totem_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement totem ... Preparing to replace totem-common 3.0.1-0ubuntu21 (using .../totem-common_3.0.1-0ubuntu21.1_all.deb) ... Unpacking replacement totem-common ... Preparing to replace gir1.2-totem-1.0 3.0.1-0ubuntu21 (using .../gir1.2-totem-1.0_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement gir1.2-totem-1.0 ... Preparing to replace glib-networking-common 2.32.1-1ubuntu1 (using .../glib-networking-common_2.32.1-1ubuntu2_all.deb) ... Unpacking replacement glib-networking-common ... Preparing to replace glib-networking 2.32.1-1ubuntu1 (using .../glib-networking_2.32.1-1ubuntu2_amd64.deb) ... Unpacking replacement glib-networking ... Preparing to replace glib-networking-services 2.32.1-1ubuntu1 (using .../glib-networking-services_2.32.1-1ubuntu2_amd64.deb) ... Unpacking replacement glib-networking-services ... Preparing to replace linux-firmware 1.79 (using .../linux-firmware_1.79.1_all.deb) ... Unpacking replacement linux-firmware ... Preparing to replace linux-generic 3.2.0.29.31 (using .../linux-generic_3.2.0.30.32_amd64.deb) ... Unpacking replacement linux-generic ... Preparing to replace linux-image-generic 3.2.0.29.31 (using .../linux-image-generic_3.2.0.30.32_amd64.deb) ... Unpacking replacement linux-image-generic ... Selecting previously unselected package linux-headers-3.2.0-30. Unpacking linux-headers-3.2.0-30 (from .../linux-headers-3.2.0-30_3.2.0-30.48_all.deb) ... Selecting previously unselected package linux-headers-3.2.0-30-generic. Unpacking linux-headers-3.2.0-30-generic (from .../linux-headers-3.2.0-30-generic_3.2.0-30.48_amd64.deb) ... Preparing to replace linux-headers-generic 3.2.0.29.31 (using .../linux-headers-generic_3.2.0.30.32_amd64.deb) ... Unpacking replacement linux-headers-generic ... Preparing to replace linux-libc-dev 3.2.0-29.46 (using .../linux-libc-dev_3.2.0-30.48_amd64.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace openjdk-7-jre 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jre_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-7-jre ... Preparing to replace openjdk-7-jdk 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jdk_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-7-jdk ... Preparing to replace policykit-1-gnome 0.105-1ubuntu3 (using .../policykit-1-gnome_0.105-1ubuntu3.1_amd64.deb) ... Unpacking replacement policykit-1-gnome ... Preparing to replace xserver-xorg-input-synaptics 1.6.2-1ubuntu1~precise1 (using .../xserver-xorg-input-synaptics_1.6.2-1ubuntu1~precise2_amd64.deb) ... Unpacking replacement xserver-xorg-input-synaptics ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for hicolor-icon-theme ... Processing triggers for shared-mime-info ... Unknown media type in type 'all/all' Unknown media type in type 'all/allfiles' Unknown media type in type 'uri/mms' Unknown media type in type 'uri/mmst' Unknown media type in type 'uri/mmsu' Unknown media type in type 'uri/pnm' Unknown media type in type 'uri/rtspt' Unknown media type in type 'uri/rtspu' Processing triggers for man-db ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for gconf2 ... Processing triggers for libglib2.0-0:i386 ... Processing triggers for libglib2.0-0 ... Setting up linux-image-3.2.0-30-generic (3.2.0-30.48) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic update-initramfs: Generating /boot/initrd.img-3.2.0-30-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-30-generic Found initrd image: /boot/initrd.img-3.2.0-30-generic Found linux image: /boot/vmlinuz-3.2.0-29-generic Found initrd image: /boot/initrd.img-3.2.0-29-generic Found linux image: /boot/vmlinuz-3.2.0-23-generic Found initrd image: /boot/initrd.img-3.2.0-23-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows 7 (loader) on /dev/sda1 Found Windows Recovery Environment (loader) on /dev/sda2 Found Windows Recovery Environment (loader) on /dev/sda3 done Setting up python-problem-report (2.0.1-0ubuntu13) ... Setting up python-apport (2.0.1-0ubuntu13) ... Setting up apport (2.0.1-0ubuntu13) ... apport start/running Setting up apport-gtk (2.0.1-0ubuntu13) ... Setting up firefox (15.0.1+build1-0ubuntu0.12.04.1) ... Please restart all running instances of firefox, or you will experience problems. Setting up firefox-globalmenu (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-gnome-support (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-locale-en (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-locale-es (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-locale-zh-hans (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up libtotem0 (3.0.1-0ubuntu21.1) ... Setting up totem-common (3.0.1-0ubuntu21.1) ... Setting up totem (3.0.1-0ubuntu21.1) ... Setting up totem-mozilla (3.0.1-0ubuntu21.1) ... Setting up gir1.2-totem-1.0 (3.0.1-0ubuntu21.1) ... Setting up totem-plugins (3.0.1-0ubuntu21.1) ... Setting up glib-networking-common (2.32.1-1ubuntu2) ... Setting up glib-networking-services (2.32.1-1ubuntu2) ... Setting up glib-networking (2.32.1-1ubuntu2) ... Setting up linux-firmware (1.79.1) ... Setting up linux-image-generic (3.2.0.30.32) ... Setting up linux-generic (3.2.0.30.32) ... Setting up linux-headers-3.2.0-30 (3.2.0-30.48) ... Setting up linux-headers-3.2.0-30-generic (3.2.0-30.48) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Setting up linux-headers-generic (3.2.0.30.32) ... Setting up linux-libc-dev (3.2.0-30.48) ... Setting up policykit-1-gnome (0.105-1ubuntu3.1) ... Setting up xserver-xorg-input-synaptics (1.6.2-1ubuntu1~precise2) ... Setting up openjdk-7-jre-headless (7u7-2.3.2-1ubuntu0.12.04.1) ... Installing new version of config file /etc/java-7-openjdk/security/java.security ... Installing new version of config file /etc/java-7-openjdk/jvm-amd64.cfg ... Setting up openjdk-7-jre-lib (7u7-2.3.2-1ubuntu0.12.04.1) ... Setting up icedtea-7-jre-jamvm (7u7-2.3.2-1ubuntu0.12.04.1) ... Setting up openjdk-7-jre (7u7-2.3.2-1ubuntu0.12.04.1) ... Setting up openjdk-7-jdk (7u7-2.3.2-1ubuntu0.12.04.1) ... update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/bin/jcmd to provide /usr/bin/jcmd (jcmd) in auto mode. Processing triggers for libc-bin ... ldconfig deferred processing now taking place Log ended: 2012-09-12 00:49:16

  Read the article

• "Shared Folders" Feature Is Not Working In VirtualBox

  - by Islam Hassan

  I have Ubuntu 11.10 as a host and another linux 2.6 distribution as a guest. When I try to setup guest additions, this error message appears Building the shared folder support module .. fail And because of that, when I run the following in terminal mount -t vboxsf shared /root/shared I get the following error message mount: unknown filesystem type 'vboxsf' Any syggestions please? EDIT Sorry, the mentioned error message isn't complete, this is it. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) This is the content of vboxadd-install.log Uninstalling modules from DKMS Attempting to install using DKMS Creating symlink /var/lib/dkms/vboxguest/4.1.2/source -> /usr/src/vboxguest-4.1.2 DKMS: add Completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... make KERNELRELEASE=3.2.6 -C /lib/modules/3.2.6/build M=/var/lib/dkms/vboxguest/4.1.2/build..........................(bad exit status: 2) Error! Bad return status for module build on kernel: 3.2.6 (i686) Consult the make.log in the build directory /var/lib/dkms/vboxguest/4.1.2/build/ for more information. 0 0 ERROR: binary package for vboxguest: 4.1.2 not found Failed to install using DKMS, attempting to install without make KBUILD_VERBOSE=1 -C /lib/modules/3.2.6/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* WARNING: Symbol version dump /usr/src/linux-source-3.2.6/Module.symvers is missing; modules will have no dependencies and modversions. Actually the log file is very large and it exceeds the 30000 characters limit. How can I upload the entire log file here?

  Read the article

• Moving Character in C# XNA Not working

  - by Matthew Stenquist

  I'm having trouble trying to get my character to move for a game I'm making in my sparetime for the Xbox. However, I can't seem to figure out what I'm doing wrong , and I'm not even sure if I'm doing it right. I've tried googling tutorials on this but I haven't found any helpful ones. Mainly, ones on 3d rotation on the XNA creators club website. My question is : How can I get the character to walk towards the right in the MoveInput() function? What am I doing wrong? Did I code it wrong? The problem is : The player isn't moving. I think the MoveInput() class isn't working. Here's my code from my character class : using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; namespace Jumping { class Character { Texture2D texture; Vector2 position; Vector2 velocity; int velocityXspeed = 2; bool jumping; public Character(Texture2D newTexture, Vector2 newPosition) { texture = newTexture; position = newPosition; jumping = true; } public void Update(GameTime gameTime) { JumpInput(); MoveInput(); } private void MoveInput() { //Move Character right GamePadState gamePad1 = GamePad.GetState(PlayerIndex.One); velocity.X = velocity.X + (velocityXspeed * gamePad1.ThumbSticks.Right.X); } private void JumpInput() { position += velocity; if (GamePad.GetState(PlayerIndex.One).Buttons.A == ButtonState.Pressed && jumping == false) { position.Y -= 1f; velocity.Y = -5f; jumping = true; } if (jumping == true) { float i = 1.6f; velocity.Y += 0.15f * i; } if (position.Y + texture.Height >= 1000) jumping = false; if (jumping == false) velocity.Y = 0f; } public void Draw(SpriteBatch spriteBatch) { spriteBatch.Draw(texture, position, Color.White); } } }

  Read the article

• USB Flash Drive not Detected on 12.10 x64

  - by Falguni Roy

  My Mediatek usb flash drive is not get detected. The o/p of lsusb falguni@falguni-M61PME-S2P:~$ lsusb Bus 002 Device 002: ID 0e8d:0003 MediaTek Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub and the o/p of usb-devices falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub But in 12.04, the o/p of usb-devices was: falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=0003 Rev=02.00 S: Manufacturer=MediaTek Inc S: Product=MT6235 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm It was working fine in 12.04. Now after upgrading to 12.10 the problem started. Where is the problem and how to solve it?

  Read the article

• Stencil buffer appears to not be decrementing values correctly

  - by Alex Ames

  I'm attempting to use the stencil buffer as a clipper for my UI system, but I'm having trouble debugging a problem I'm running in to. This is what I'm doing: A widget can pass a rectangle to the the stencil clipper functions, which will increment the stencil buffer values that it covers. Then it will draw its children, which will only get drawn in the stencilled area (so that if they extend outside they'll be clipped). After a widget is done drawing its children, it pops that rectangle from the stack and in the process decrements the values in the stencil buffer that it has previously incremented. The slightly simplified code is below: static void drawStencil(Rect& rect, unsigned int ref) { // Save previous values of the color and depth masks GLboolean colorMask[4]; GLboolean depthMask; glGetBooleanv(GL_COLOR_WRITEMASK, colorMask); glGetBooleanv(GL_DEPTH_WRITEMASK, &depthMask); // Turn off drawing glColorMask(0, 0, 0, 0); glDepthMask(0); // Draw vertices here ... // Turn everything back on glColorMask(colorMask[0], colorMask[1], colorMask[2], colorMask[3]); glDepthMask(depthMask); // Only render pixels in areas where the stencil buffer value == ref glStencilFunc(GL_EQUAL, ref, 0xFF); glStencilOp(GL_KEEP, GL_KEEP, GL_KEEP); } void pushScissor(Rect rect) { // increment things only at the current stencil stack level glStencilFunc(GL_EQUAL, s_scissorStack.size(), 0xFF); glStencilOp(GL_KEEP, GL_INCR, GL_INCR); s_scissorStack.push_back(rect); drawStencil(rect, states, s_ScissorStack.size()); } void popScissor() { // undo what was done in the previous push, // decrement things only at the current stencil stack level glStencilFunc(GL_EQUAL, s_scissorStack.size(), 0xFF); glStencilOp(GL_KEEP, GL_DECR, GL_DECR); Rect rect = s_scissorStack.back(); s_scissorStack.pop_back(); drawStencil(rect, states, s_scissorStack.size()); } And this is how it's being used by the Widgets if (m_clip) pushScissor(m_rect); drawInternal(target, states); for (auto child : m_children) target.draw(*child, states); if (m_clip) popScissor(); This is the result of the above code: There are two things on the screen, a giant test button, and a window with some buttons and text areas on it. The text area scroll box is set to clip its children (so that the text doesn't extend outside the scroll box). The button is drawn after the window and should be on top of it completely. However, for some reason the text area is appearing on top of the button. The only reason I can think of that this would happen is if the stencil values were not getting decremented in the pop, and when it comes time to render the button, since those pixels don't have the right stencil value it doesn't draw over. But I can't figure out whats wrong with my code that would cause that to happen.

  Read the article

• Web Apps vs Web Services: 302s and 401s are not always good Friends

  - by Your DisplayName here!

  It is not very uncommon to have web sites that have web UX and services content. The UX part maybe uses WS-Federation (or some other redirect based mechanism). That means whenever an authorization error occurs (401 status code), this is picked by the corresponding redirect module and turned into a redirect (302) to the login page. All is good. But in services, when you emit a 401, you typically want that status code to travel back to the client agent, so it can do error handling. These two approaches conflict. If you think (like me) that you should separate UX and services into separate apps, you don’t need to read on. Just do it ;) If you need to mix both mechanisms in a single app – here’s how I solved it for a project. I sub classed the redirect module – this was in my case the WIF WS-Federation HTTP module and modified the OnAuthorizationFailed method. In there I check for a special HttpContext item, and if that is present, I suppress the redirect. Otherwise everything works as normal: class ServiceAwareWSFederationAuthenticationModule : WSFederationAuthenticationModule {     protected override void OnAuthorizationFailed(AuthorizationFailedEventArgs e)     {         base.OnAuthorizationFailed(e);         var isService = HttpContext.Current.Items[AdvertiseWcfInHttpPipelineBehavior.DefaultLabel];         if (isService != null)         {             e.RedirectToIdentityProvider = false;         }     } } Now the question is, how do you smuggle that value into the HttpContext. If it is a MVC based web service, that’s easy of course. In the case of WCF, one approach that worked for me was to set it in a service behavior (dispatch message inspector to be exact): public void BeforeSendReply( ref Message reply, object correlationState) {     if (HttpContext.Current != null)     {         HttpContext.Current.Items[DefaultLabel] = true;     } } HTH

  Read the article

• Ubuntu 12.10 graphics does not work properly

  - by madox2

  My graphic on ubuntu 12.10 does not work as well as on 12.04. After upgrade I installed driver sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current for my Nvidia 450 GTS graphics card. But sometimes I see slight lag on my videos played in VLC player, some of desktop and window effects are lagging, sometimes I can see an indescribable souce of pixels on my screen at the start of ubuntu and so on. I feel difference between 12.04 and 12.10 in favour of former version. Does anyone know whats wrong or what I am missing? here is output of lspci -k: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Giga-byte Technology Device 1c3a Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: Giga-byte Technology Device 5006 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Giga-byte Technology Device a000 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: Giga-byte Technology Device 5006 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05) Subsystem: Giga-byte Technology Device 5001 Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05) Subsystem: Giga-byte Technology Device b002 Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Giga-byte Technology Device 5001 Kernel modules: i2c-i801 00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05) Subsystem: Giga-byte Technology Device b002 Kernel driver in use: ata_piix 01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTS 450] (rev a1) Subsystem: CardExpert Technology Device 0401 Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1) Subsystem: CardExpert Technology Device 0401 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Subsystem: Giga-byte Technology Device e000 Kernel driver in use: atl1c Kernel modules: atl1c

  Read the article

• Uniform not being applied to proper mesh

  - by HaMMeReD

  Ok, I got some code, and you select blocks on a grid. The selection works. I can modify the blocks to be raised when selected and the correct one shows. I set a color which I use in the shader. However, I am trying to change the color before rendering the geometry, and the last rendered geometry (in the sequence) is rendered light. However, to debug logic I decided to move the block up and make it white, in which case one block moves up and another block becomes white. I checked all my logic and it knows the correct one is selected and it is showing in, in the correct place and rendering it correctly. When there is only 1 it works properly. Video Of the bug in action, note how the highlighted and elevated blocks are not the same block, however the code for color and My Renderer is here (For the items being drawn) public void render(Renderer renderer) { mGrid.render(renderer, mGameState); for (Entity e:mGameEntities) { UnitTypes ut = UnitTypes.valueOf((String)e.getObject(D.UNIT_TYPE.ordinal())); if (ut == UnitTypes.Soldier) { renderer.testShader.begin(); renderer.testShader.setUniformMatrix("u_mvpMatrix",mEntityMatrix); renderer.texture_soldier.bind(0); Vector2 pos = (Vector2) e.getObject(D.COORDS.ordinal()); mEntityMatrix.set(renderer.mCamera.combined); if (mSelectedEntities.contains(e)) { mEntityMatrix.translate(pos.x, 1f, pos.y); renderer.testShader.setUniformf("v_color", 0.5f,0.5f,0.5f,1f); } else { mEntityMatrix.translate(pos.x, 0f, pos.y); renderer.testShader.setUniformf("v_color", 1f,1f,1f,1f); } mEntityMatrix.scale(0.2f, 0.2f, 0.2f); renderer.model_soldier.render(renderer.testShader,GL20.GL_TRIANGLES); renderer.testShader.end(); } else if (ut == UnitTypes.Enemy_Infiltrator) { renderer.testShader.begin(); renderer.testShader.setUniformMatrix("u_mvpMatrix",mEntityMatrix); renderer.testShader.setUniformf("v_color", 1.0f,1,1,1.0f); renderer.texture_enemy_infiltrator.bind(0); Vector2 pos = (Vector2) e.getObject(D.COORDS.ordinal()); mEntityMatrix.set(renderer.mCamera.combined); mEntityMatrix.translate(pos.x, 0f, pos.y); mEntityMatrix.scale(0.2f, 0.2f, 0.2f); renderer.model_enemy_infiltrator.render(renderer.testShader,GL20.GL_TRIANGLES); renderer.testShader.end(); } } }

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >