Search Results

Search found 6200 results on 248 pages for 'partition recovery'.

Page 84/248 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• Grub2 cannot detect Windows 8

  - by MetaChrome

  At installation it did not detect Windows. I mounted the Windows partition and have run os-prober with no results returning. I am able to boot Windows or Ubuntu by specifying the partition in UEFI boot order. The bios does not appear to allow booting with legacy. SecureBoot is on. This is with Ubuntu 12.04 LTS on a Inspiron 15. Here is the gdisk: 1 2048 1026047 500.0 MiB EF00 EFI system partition 2 1026048 1107967 40.0 MiB FFFF Basic data partition 3 1107968 1370111 128.0 MiB 0C01 Microsoft reserved part 4 1370112 2394111 500.0 MiB 2700 Basic data partition 5 2394112 544743423 258.6 GiB 0700 Basic data partition 6 606183424 625140399 9.0 GiB 2700 Microsoft recovery part 7 544743424 545230847 238.0 MiB 0700 (/boot) 8 545230848 556949503 5.6 GiB 8200 (swap) 9 556949504 606181375 23.5 GiB 0700 (/) When installing ubuntu, I believe I specified that the bootloader be installed on /dev/sda. I added the following to /etc/grub.d/40_custom but booting ubuntu did not offer a grub menu: menuentry "Windows 8" { set root = "(hd0,4)" chainloader +1 } When booting I think I see "EFI Disk error" flash very quickly before Ubuntu starts booting.

  Read the article

• Why would my HDD main partition suddenly become hidden?

  - by Luis Oscar

  A few days ago I was using my computer as usual and I turned it off. The next day it wouldn't boot up. It just stayed after the hardware diagnostic window on the intermittent underscore screen. So clearly It wasn't booting up. I tried turning it on and off a couple of times with no avail. Finally I used windows 7 disk and it seemed as if there was no HDD. not even the installation would see the HDD. So i thought it was dead, i bought a new one installed it with windows and used a external case with the old HDD. plug it in and still couldn't see it. I finally downloaded a partition program EASUS or something and my HDD was there listed WITHOUT a system letter. I could however explore it and i set it as Unhidden and it came back to life. I could see it normally. I really just wish someone could explain to me what happened here, was it a virus? does it means the HDD is about to die? How can i prevent this or what should I do now? should i stop using this OLD HDD? Thanks

  Read the article

• Why am I unable to mount my USB drive (unknown partition table)?

  - by Pat

  I'm a real newbie to linux. Anyway the problem is that my USB doesn't get recognized anymore which is really annoying because I need information from it. I've read like a zillion threads how to manually mount it but I really can't it to work. I hope it's just some easy, stupid problem where any of you could help me out quickly.. Here is the syslog: kernel: [ 6872.420125] usb 2-2: new high-speed USB device number 11 using ehci_hcd mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" kernel: [ 6872.556295] scsi8 : usb-storage 2-2:1.0 mtp-probe: bus: 2, device: 11 was not an MTP device kernel: [ 6873.558081] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS kernel: [ 6873.559964] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 6873.562833] sd 8:0:0:0: [sdc] 15682559 512-byte logical blocks: (8.02 GB/7.47 GiB) kernel: [ 6873.564867] sd 8:0:0:0: [sdc] Write Protect is off kernel: [ 6873.564878] sd 8:0:0:0: [sdc] Mode Sense: 45 00 00 08 kernel: [ 6873.565485] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.565495] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.568377] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.568387] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.574330] sdc: unknown partition table kernel: [ 6873.576853] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.576863] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.576871] sd 8:0:0:0: [sdc] Attached SCSI removable disk Thanks in advance

  Read the article

• dual boot ubuntu installation mishap

  - by user590849

  I have Windows 7 pc ,where i had 2 partitions, a c drive for my system files and a d drive for my data. I decided to install ubuntu 11.10 a couple of days ago and thought of install it in a separate partition of its own. So i made a separate Linux partition of 30GB. I downloaded ubuntu on my usb stick and installed. During the installation process i was asked where to install ubuntu so i opened up a screen that was similar to this one There were six partitions present ( I had made only 3 partition via windows). Their names were totally different from the ones that i had given in windows. So i selected a drive which had the same size as my Linux partition that i had made in windows ( no other partition had the same size). I clicked on install now and got an error message saying that "There was no root folder set". I set the newly made partition as my root folder and clicked install now. Now out of the 6 partitions that were created 3 were logical ( i had only created 3 partitions in windows). As soon as i clicked install now, the system asked me where i wanted to put my "swap space". I selected one of the logical drives and hit install. Ubuntu successfully installed on my system and at the end it asked me to reboot. I did and got the following error message: "missing operating system". I was shocked. I tried my windows recovery disk ( that i had gotten when i had purchased my laptop) and there i went into startup repair. In the startup repair option i was not able to locate windows. The system asked me to click the "Load drivers" button to load the drivers to my harddrive where windows was installed, but i could not locate any drivers to my harddrive. I tried this several times but to no success. I panicked and installed ubuntu, now this time click "ok" at every step( not worrying about the partition and all). The os installed correctly and i am now able to access my harddrive. NO data within the c drive is lost. All the windows system files are intact. I wish to recover my windows installation. How do i go about it? Thank you in advance. I do not want to format my computer and install windows again.

  Read the article

• MySQL InnoDB Corruption after power outage, possible to recover?

  - by Tim Hackett

  Hey Guys, I recently started trying to get Redmine up and running after a power outage that seems to have corrupted our InnoDB database in MySQL. Redmine had an extensive set of documentation that I would like to get even if redmine isn't able to run. The service fails on startup. I have tried inserting innodb_force_recovery = 4 per the documentation from the url in the error log. (also tried 1 thru 6 as I have backed up all directories after the corruption) I have verified through "mysqld-nt --print-defaults" that it is starting with the recovery option in the params. The machine is running Windows Server 2003 SP2, Xeon E5335 with 2GB RAM, MySQL is not mirrored to another machine, nor is the machine a mirror. I do not have any backups because the previous person did not set them up. Here is the error log: InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 100308 14:50:01 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 100308 14:50:02 InnoDB: Error: page 7 log sequence number 0 935521175 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 2 log sequence number 0 935517607 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 11 log sequence number 0 935517607 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 5 log sequence number 0 972973045 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 6 log sequence number 0 972984051 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 1577 log sequence number 0 972737368 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. InnoDB: Error: trying to access page number 4294965119 in space 0, InnoDB: space name .\ibdata1, InnoDB: which is outside the tablespace bounds. InnoDB: Byte offset 0, len 16384, i/o type 10. InnoDB: If you get this error at mysqld startup, please check that InnoDB: your my.cnf matches the ibdata files that you have in the InnoDB: MySQL server. 100308 14:50:02InnoDB: Assertion failure in thread 960 in file .\fil\fil0fil.c line 3959 InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: about forcing recovery. 100308 14:50:02 [ERROR] mysqld-nt: Got signal 11. Aborting! 100308 14:50:02 [ERROR] Aborting 100308 14:50:02 [Note] mysqld-nt: Shutdown complete

  Read the article

• Non-standard installation (installing Linux from Linux)

  - by Evan Plaice

  So, here's my setup. I have one partition with the newest version installed, a second partition with an older version installed (as a backup just in case), a swap partition that both share, and a boot partition so the bootloader doesn't need to be setup after each upgrade. Partitions: sda1 ext3 /boot sda2 ext4 / (current version) sda3 ext4 / (old version) sda4 swap /swap sda5 ntfs (contains folders symbolically linked to /home on /) So far it has been a very good setup. I can create new boot loaders without screwing it up and adding my personal files into a new install is as simple as creating some symbolic links (the partition is NTFS in case I need to load windows on the system again). Here's the issue. I'd like to be able to drop the install into /distro on the current version and install a new version on / on the old version effectively replacing/upgrading it. The goal is to be able to just swap out new versions as they are released while maintaining redundancy in case I don't like th update. So far I have: downloaded the install.iso created a folder in /distro copied the install.iso into /distro extracted vmlinuz and initrd.lz into /distro Then I modified /boot/grub/menu.lst with the following entry: title Install Linux root (hd0,1) kernel /distro/vmlinuz initrd /distro/initrd.lz vmlinuz loads perfectly but it says it can't find initrd.lz on boot. I have also tried to uncompress the image with: unlzma < initrd.lz > initrd.img And, updating the menu.lst file to match; but that doesn't work either. I'm assuming that vmlinuz (linux kernel) loads, fires up the virtual filesystem by creating a ramdisk (initrd), mounts the iso, and launches the installer. Am I missing something here? Update: First, I wanted to say that the accepted answer would have been the best option if I was doing a normal Ubuntu install. Unfortunately, I was installing Linux Mint (which lacks the script needed to make debootstrap work. So the problem I with the above approach was, I was missing the command that vmlinuz (linux kernel) needed to execute to start boot into LiveCD mode. By looking in the /boot/grub/grub.cfg file I found what I was missing. Although this method will work, it requires that the installation files reside on their own partition. I took the easy route and used unetbootin to drop the LiveCD on a usb drive and booted from that. Like I said before. Debootstrap would have been the ideal solution here. Even though I couldn't use it I wrote down the steps it would've taken to use it. Step One: Format sda3 (the partition with the old copy of linux that's being overwritten) I used gparted to format it as ext4 from within the current linux install. How this is done varies based on what tools you prefer to use. Step Two: Mount the newly formatted partition (we'll call the mount ubuntu for simplicity) sudo mkdir /mnt/ubuntu sudo mount -o -loop /dev/sda3 /mnt/ubuntu Step Three: Get debootstrap sudo apt-get install debootstrap Step Four: Mount the install disk (replace ubuntu.iso with the name if your install disk) sudo mkdir /media/cdrom sudo mount -o loop ~/ubuntu.iso /media/cdrom Step Five: Install the OS using debootstrap (replace fiesty with the version you're installing and amd64 with your processor's architecture) sudo debootstrap --arch amd64 fiesty /mnt/ubuntu file:/media/cdrom The settings here varies. While I loaded debootstrap using an install iso, you can also have debootstrap automatically download and install if with a repository link (While most of these repositories contain debian versions I'm still not clear as to whether Ubuntu has similar repositories). Here a list of the debian package repositories and their mirrors. This is how you'd deploy debootstrap if you were doing it directly from a repository: sudo debootstrap --arch amd64 squeeze /mnt/debian http://ftp.us.debian.org/debian Here's the link that I primarily used to figure this out.

  Read the article

• SQL SERVER – Transaction Log Full – Transaction Log Larger than Data File – Notes from Fields #001

  - by Pinal Dave

  I am very excited to announce a new series on this blog – Notes from Fields. I have been blogging for almost 7 years on this blog and it has been a wonderful experience. Though, I have extensive experience with SQL and Databases, it is always a good idea that we consult experts for their advice and opinion. Following the same thought process, I have started this new series of Notes from Fields. In this series we will have notes from various experts in the database world. My friends at Linchpin People have graciously decided to support me in my new initiation.  Linchpin People are database coaches and wellness experts for a data driven world. In this very first episode of the Notes from Fields series database expert Tim Radney (partner at Linchpin People) explains a very common issue DBA and Developer faces in their career, when database logs fills up your hard-drive or your database log is larger than your data file. Read the experience of Tim in his own words. As a consultant, I encounter a number of common issues with clients.  One of the more common things I encounter is finding a user database in the FULL recovery model that does not make a regular transaction log backups or ever had a transaction log backup. When I find this, usually the transaction log is several times larger than the data file. Finding this issue is very significant to me in that it allows to me to discuss service level agreements with the client. I get to ask questions such as, are nightly full backups sufficient or do they need point in time recovery.  This conversation has now signed with the customer and gets them to thinking about their disaster recovery and high availability solutions. This issue is also very prominent on SQL Server forums and usually has the title of “Help, my transaction log has filled up my disk” or “Help, my transaction log is many times the size of my database”. In cases where the client only needs the previous full nights backup, I am able to change the recovery model to SIMPLE and shrink the transaction log using DBCC SHRINKFILE (2,1) or by specifying the transaction log file name by using DBCC SHRINKFILE (file_name, target_size). When the client needs point in time recovery then in most cases I will still end up switching the client to the SIMPLE recovery model to truncate the transaction log followed by a full backup. I will then schedule a SQL Agent job to make the regular transaction log backups with an interval determined by the client to meet their service level agreements. It should also be noted that typically when I find an overgrown transaction log the virtual log file count is also out of control. I clean up will always take that into account as well.  That is a subject for a future blog post. If your SQL Server is facing any issue we can Fix Your SQL Server. Additional reading: Monitoring SQL Server Database Transaction Log Space Growth – DBCC SQLPERF(logspace)  SQL SERVER – How to Stop Growing Log File Too Big Shrinking Truncate Log File – Log Full Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Recover Lost Form Data in Firefox

  - by Asian Angel

  Have you ever filled in a text area or form in a webpage and something happens before you can finish it? If you like the idea of recovering that lost data then you will want to have a look at the Lazarus: Form Recovery extension for Firefox. Lazarus: Form Recovery in Action For our first example we chose the comment text box area for one of the articles here at the website. As you can see we were not finished typing in the whole comment yet… Notice the “Lazarus Icon” in the lower right corner. Note: We simulated accidental tab closures for our two examples. After getting our webpage opened up again all of our text was gone. Right clicking within the text area showed two options available…”Recover Text & Recover Form”. Notice that our lost text was listed as a “sub menu”…this could be extremely useful in matching up the appropriate text to the correct webpage if you had multiple tabs open before something happened. Click on the correct text listing to insert it. So easy to finish writing our comment without having to start from zero again. In our second example we chose the sign-up form page for the website. As before we were not finished filling in the form… Getting the webpage opened back up showed the same problem as before…all the entered text was lost. This time we right clicked in the browser window area and there was that wonderful “Recover Form Command” waiting to be used. One click and… All of our lost form data was back and we were able to finish filling in the form. For those who may be interested you can disable Lazarus: Form Recovery on individual websites using the “Context Menu” for the “Status Bar Icon” Options There are three sections in the options and you should take a quick look through them to make any desired modifications in how Lazarus: Form Recovery functions. The first “Options Area” focuses on display/access for the extension. The second “Options Area” allows you to expand the type of data retained, enable removal of data within a given time frame, set up a password, disable search indexing, and enable form data retention while in “Private Browsing Mode”. The third “Options Area” focuses on the Lazarus database itself. Conclusion If you have ever lost text area or form data before then you know how much time could be lost in starting over. Lazarus: Form Recovery helps provide a nice backup solution to get you up and running once again with a minimum of effort. Links Download the Lazarus: Form Recovery extension (Mozilla Add-ons) Download the Lazarus: Form Recovery extension (Extension Homepage) Similar Articles Productive Geek Tips Quick Tip: Resize Any Textbox or Textarea in FirefoxWhy Doesn’t AutoComplete Always Work in Firefox?Pass Variables between Windows Forms Windows without ShowDialog()Using Secure Login in FirefoxAdd Search Forms to the Firefox Search Bar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

  Read the article

• UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD)

  - by swafbrother

  UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD) Hello, I'm having trouble setting up a dual-boot (Ubuntu 12.04 LTS and Windows 8.1) in my ASUS K55VM laptop's hard drive disk (500 GB). I was mostly following tutorials for doing this, but at some point something has gone wrong. Up to now, I have followed these steps: I formatted my HDD into GPT. I clean-installed Windows 8.1. I didn't prevent Windows from choosing the partitions to use and it created these partitions: A Recovery partition (sda1). An EFI System Partition (sda2). A Microsoft Reserved Partition (sda3). A Windows Data Partition or C drive (sda4). I reduced the Windows Data Partition via Windows' Disk Management. I made a bootable USB Stick with Ubuntu 12.04 LTS from ISO, using Universal USB Installer. I created these partitions for Ubuntu: A Boot partition, mounted at /boot (sda5). A Root partition, mounted at / (sda6). A Swap partition (sda7). In Device for boot loader installation I chose: /dev/sda. Then, when I rebooted, it went straight into Ubuntu. So I installed Boot-Repair, and clicked on Recommended Repair. It automatically did its job without asking for anything. I rebooted and Grub showed up, with a lot of options. At this point I had a decent dual-boot setup; Ubuntu and both Windows entries worked fine: Ubuntu. Windows Boot UEFI Loader. Windows UEFI bkpbootmgfw.efi. I executed this command: sudo grub-install --force /dev/sda5. Then I tried to make Windows 8.1's Boot Manager the main boot manager, so that I could choose which OS to boot into from a menu. I downloaded EasyBCD on Windows. It showed 2 Ubuntu entries and 1 Windows entry. I went into BCD Deployment tab and clicked on Write MBR. At this point, I went into BIOS and made Windows Boot Manager the first boot option. When I rebooted, I got a black screen with the message efidisk read error, and then (I guess) it switched to the next boot option, which is Ubuntu, resulting in Grub showing up. From Grub, Ubuntu entry is working and so are both Windows entries. If I choose Ubuntu, it normally boots into Ubuntu. But if I choose Windows, it goes into Windows' boot manager. In Windows' boot manager, a menu shows up: Ubuntu. Ubuntu. Windows 8.1. If I choose Windows, it boots into Windows without any problem. If I choose Ubuntu, it boots into Grub (back to step 14). Here's my BootInfo Summary: http://paste.ubuntu.com/6698171/ Windows Boot Manager is clearly not working as expected; I can't directly boot into it and I can't boot into it from BIOS either (efidisk read error again). If I want to boot into Windows I need to boot into Grub first, which is the opposite of what I wanted. I need help at this point. What is the best thing I can do? Is there a more reliable and/or simpler way of acomplishing a satisfying dual-boot for this situation? Can someone provide a way for going back to step 8, where I had a more efficient dual-boot setup? If only I could undo what I did with Easy BCD and skip Windows' Boot Menu... Can someone provide a way to fix this mess? Thanks in advance and sorry for the length of this, I wanted to be exhaustive.

  Read the article

• Grub Rescue Unknown Filesystem Error. Grub Corrupted or Filesystem?

  - by nightcrawler

  Now it has happened twice & have been pulling my hairs now... I have installed xubuntu on my external hardisk & have been using it for about 3 months. It has three partitions, one of 500 mb mounted at /boot, 2nd one of 48gb mounted at / & the rest (out of 160gb) is ntfs partition....used as normal external storage. The last storage supposedly acts as a buffer b/w Linux distributions & Win platform, buffer in the sense that it provides a universal channel for data transfers. I have constantly used this external hardisk for data transfers b/w win7 laptop & xubuntu (on this external hd) without any hassle. However, on of my desktops where I have ubuntu I (for the first time) attached this external drive which let me do data transfers where all three partitions properly mounted....but then nasty thing occurred the same that occurred before. I (as usual) tried booting via this external hd (one having xubuntu, one having being formerly used under Ubuntu) I got error Now I am totally devastated because similar thing happened ~6months before when I had fedora 17 in my external hd (instead of xubuntu) & after it was used under ubuntu the same happened...i didn't reported it because I already had planned towards debian instead of rpm! The mystery is that as long as I don't attach this external hd under ubuntu the data never** corrupts whereas under win xp/7 I can use it as a normal usb storage of coarse linux partitions aren’t available under win platforms... **From corrupts I mean hd fails to boot with the error mentioned however cant say whether data within remains untouched? It seems that my grub & or MBR is corrupted. Please sir guide me to solve this issue also why I cant attach & use linux external hds under linux platform Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004e7d0 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 976895 487424 83 Linux /dev/sdc2 978942 96874495 47947777 5 Extended /dev/sdc3 96874496 312575999 107850752 7 HPFS/NTFS/exFAT /dev/sdc5 978944 94726143 46873600 83 Linux /dev/sdc6 94728192 96874495 1073152 82 Linux swap / Solaris I can recall for sure that have seen a thread here when a similar problem occurred & in response someone gave solution of how to mount (now invisible) partitions & recover important data in them. I have misplaced that URL so if any can guide me thither because my important documents resides in / partition What I already have done: Without success I have tried this & related solutions What I plan to do: I believe that filesystem has corrupted & would you recommend solution like this provided I cant recall whether my /boot (500mb) partition was ext4 or ext2 though I am sure that my / (48gb) partition was ext4 UPDATE 1 Attached my external hd under Ubuntu ran followinf command as root grub-install /dev/sdc where /dev/sdc was my external hd containing corrupted xubuntu....it reported all done! I re-ran fdisk -l but to my disappointment it reported Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1b6b9167 Disk /dev/sdc doesn't contain a valid partition table ...& now I can't even access its ntfs partition (former /dev/sdc3) please help? UPDATE 2 TestDisk (by cgsecurity) failed at founding any partition table :( TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sdc - 160 GB / 149 GiB - CHS 19457 255 63 Partition Start End Size in sectors

  Read the article

• Enkive: Open Source Email Archiving

  Real-time search and recovery of email Open source - Programming - Languages - Directories - Python

  Read the article

• How can I install Ubuntu on my Nexus 7 while being able to recover from a nandroid backup?

  - by MagicFab

  I use CyanogenMod and ClockWork Recovery on my Nexus 7. How can my existing full nandroid backup be used to restore my device after installing Ubuntu? The instructions assume "recovery" would mean re-flashing the vanilla image, at factory, data-wiped condition. It would be useful to provide a .zip that can be flash via Clockwork (or other) recovery and back to whatever Nandroid backup there is - much as any other ROM is provided/used.

  Read the article

• How to get rid of multiple linux versions in grub boot menu

  - by Silver Light

  I've been using dual boot on my PC for some time now, to use Ubuntu along side with Windows 7. One very disturbing thing happens, when Ubuntu linux core gets updated (this happens once in a while). They are added as options to the grub menu so, my boot menu now looks like this: Ubuntu, with linux 2.6.35-27 generic Ubuntu, with linux 2.6.35-27 generic (recovery mode) Ubuntu, with linux 2.6.35-25 generic Ubuntu, with linux 2.6.35-25 generic (recovery mode) Ubuntu, with linux 2.6.35-24 generic Ubuntu, with linux 2.6.35-24 generic (recovery mode) Ubuntu, with linux 2.6.35-22 generic Ubuntu, with linux 2.6.35-22 generic (recovery mode) Memory test Windows 7 This gets very annoying, because I want to load windows by default, but after every update it shifts down and I have to go to grub config and change the default option. My question: How to get rid of older versions of linux in the grub menu and leave only the newest one?

  Read the article

• Vista missing from grub bootlist after installing ubuntu

  - by tacomensa

  I installed Ubuntu on a logical partition a while ago. When I get to the grub bootlist, Vista is not there. What i get is this: Ubuntu, with linux 2.6.32-26 Ubuntu, with linux 2.6.32-26 (Recovery mode) Ubuntu, with linux 2.6.32-25 Ubuntu, with linux 2.6.32-26 (Recovery mode) Ubuntu, with linux 2.6.32-24 Ubuntu, with linux 2.6.32-26 (Recovery mode) Memory test (memtest86+) Windows vista (loader) (on/dev/sda1) windows recovery environment (loader) (on/dev/sda2) "Windows vista (loader)" is an acer erecovery manager Im guessing that grub installed on my primary partition so it overwrite the vista MBR and i dont have the option to boot vista. Is there some way i can just edit the MBR and add vista to it or how will i have to repair this? here is my boot script http://pastebin.com/7HZFjBT7

  Read the article

• GRUB is not Booting Correctly

  - by msknapp

  I have a PC with three hard disks. Windows 7 is installed on the first, Ubuntu 14.04 is installed on the third. After I re-booted, it went straight to Windows 7. So I tried explicitly telling my PC to boot using the third hard disk, but that just takes me to the grub rescue prompt. I followed Scott Severence's instructions here to try and recover. Essentially, I updated grub, reinstalled grub, and then updated it again. After re-booting, absolutely nothing had changed. So instead I tried using the boot-repair tool. In the past it had failed for me, saying that I had programs running and it could not unmount drives, when I was running nothing. I never figured out how to solve that problem, but it went away when I bought another hard drive and used that for my Ubuntu installation, I don't know why. In any case, I ran the boot-repair tool and this time it said it was successful. First time for everything right? I re-booted, only to be taken straight to the grub rescue prompt. So I changed my BIOS settings to use the third hard disk for boot start up. That is the same hard drive where I have Ubuntu and grub installed, and the same one that the grub-repair tool told me to use. It still took me straight to the grub rescue prompt. So I went from not being able to boot Ubuntu, to not being able to boot either OS installed on my system. Thanks boot-repair! Boot repair gave me this URL for future troubleshooting: http://paste.ubuntu.com/8131669 When I try to boot from the third hard disk, this is my console: Loading Operating System ... error: attempt to read or write outside of disk 'hd0'. Entering rescue mode... grub rescue> grub rescue> set cmdpath=(hd0) prefix=(hd0,gpt2)/boot/grub root=hd0,gpt2 grub rescue> ls (hd0) (hd0,gpt3) (hd0,gpt2) (hd0,gpt1) (hd1) (hd2) (hd2,gpt2) (hd2,gpt1) (hd3) Those values look correct to me. I have also experimented with changing some of those values, but 'insmod normal' always throws the same error. Somebody please tell me how to fix this. I have tried everything, reinstalling grub, and running boot-repair. =========================== Update: I think the problem might be that the ubuntu installer did not partition my hard disk correctly. I booted from live USB and then launched gparted and looked at how it partitioned things. This is what gparted says: Partition, File System, Size, Used, Unused, Flags /dev/sda1 (!), unknown, 1.00 MiB, ---, ---, bios_grub /dev/sda2, ext4, 2.71 TiB, 47.30 GiB, 2.67 TiB, /dev/sda3, linux-swap, 16.00 GiB, 0.00 B, 16.00 GiB, So that first line looks problematic. It is supposed to be the /boot partition. However, it was given only 1 MiB? I am assuming that MiB is actually supposed to mean megabyte, no idea why that 'i' is there. It also says the file system is unknown. I read the answer by andrew here, and he says he had to do a custom install, explicitly configuring the boot partition. So I think that maybe Ubuntu's installer has a bug in it, where it does not set up the boot partition correctly if you are not installing on the first hard disk in your computer. I am going to try reinstalling with a custom partition scheme. I read elsewhere (askubuntu won't let me post another link) that I don't even need a /boot partition any more. So instead of following Andrew's instructions ver batim, I'm first going to try having just two partitions: one for /, and another for my 16GB swap space. Both as primary partitions. The first will be formatted as ext4. If that doesn't work, I may try again using /boot. ======================== So I did my custom install with no /boot partition, and it did not work. When I rebooted, I had an error message saying that some address did not exist. So for the hundredth time, I booted from the live USB, and ran boot-repair. Now I get this message GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. I feel like I'm running in circles and nobody will help me.

  Read the article

• Mysql partitioning: Partitions outside of date range is included

  - by Sturlum

  Hi, I have just tried to configure partitions based on date, but it seems that mysql still includes a partition with no relevant data. It will use the relevant partition but also include the oldest for some reason. Am I doing it wrong? The version is 5.1.44 (MyISAM) I first added a few partitions based on "day", which is of type "date" ALTER TABLE ptest PARTITION BY RANGE(TO_DAYS(day)) ( PARTITION p1 VALUES LESS THAN (TO_DAYS('2009-08-01')), PARTITION p2 VALUES LESS THAN (TO_DAYS('2009-11-01')), PARTITION p3 VALUES LESS THAN (TO_DAYS('2010-02-01')), PARTITION p4 VALUES LESS THAN (TO_DAYS('2010-05-01')) ); After a query, I find that it uses the "old" partition, that should not contain any relevant data. mysql> explain partitions select * from ptest where day between '2010-03-11' and '2010-03-12'; +----+-------------+------------+------------+-------+---------------+------+---------+------+------+-------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+------------+------------+-------+---------------+------+---------+------+------+-------------+ | 1 | SIMPLE | ptest | p1,p4 | range | day | day | 3 | NULL | 79 | Using where | +----+-------------+------------+------------+-------+---------------+------+---------+------+------+-------------+ When I select a single day, it works: mysql> explain partitions select * from ptest where day = '2010-03-11'; +----+-------------+------------+------------+------+---------------+------+---------+-------+------+-------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+------------+------------+------+---------------+------+---------+-------+------+-------+ | 1 | SIMPLE | ptest | p4 | ref | day | day | 3 | const | 39 | | +----+-------------+------------+------------+------+---------------+------+---------+-------+------+-------+

  Read the article

• Cannot Install Bootcamp on Mac Fusion Drive

  - by user3377019

  I have two drive installed in my mid-2013 Macbook pro. It is running osx maverick. I set the two drives (an ssd and a regular HD) up using the fusion drive (following the diy fusion drive guides out there). I went ahead and created a 40gb partition to host my windows install. I removed the SSD, installed windows, then reinstalled the SSD. As soon as the ssd was placed back in the bootcamp partition stopped booting. I get a blinking cursor on a black screen. I checked out the partition info in disk utility and it appears that the windows partition is not marked bootable. Below is some info I managed to gather. I am wondering if there is a way to fix the partition table so my bootcamp will boot. /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage 119.7 GB disk0s2 3: Apple_Boot Boot OS X 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data BOOTCAMP 40.0 GB disk1s2 3: Apple_CoreStorage 459.2 GB disk1s3 4: Apple_Boot Boot OS X 650.0 MB disk1s4 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD *573.4 GB disk2 Name : BOOTCAMP Type : Partition Disk Identifier : disk1s2 Mount Point : /Volumes/BOOTCAMP File System : Windows NT File System (NTFS) Connection Bus : SATA Device Tree : IODeviceTree:/PCI0@0/SATA@1F,2/PRT1@1/PMP@0 Writable : No Universal Unique Identifier : 584BAED6-4C46-4F18-93B3-957F6E27003C Capacity : 40 GB (39,998,980,096 Bytes) Free Space : 16.34 GB (16,339,972,096 Bytes) Used : 23.66 GB (23,659,003,904 Bytes) Number of Files : 86,424 Number of Folders : 0 Owners Enabled : No Can Turn Owners Off : No Can Be Formatted : No Bootable : No Supports Journaling : No Journaled : No Disk Number : 1 Partition Number : 2

  Read the article

• Windows 7 boots to black screen with blinking cursor

  - by murgatroid99

  I have an Alienware M17x that dual boots into Ubuntu 11.04 and Windows 7 Home Premium. Currently, the computer starts at the GRUB loader and will boot into Ubuntu, but if I try to boot into Windows, I immediately get a black screen with a blinking cursor in the upper left corner. The output of fdisk -l is Device Boot Start End Blocks Id System /dev/dm-0p1 1 5 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/dm-0p2 6 1918 15360000 7 HPFS/NTFS Partition 2 does not start on physical sector boundary. /dev/dm-0p3 * 1918 64772 504878877+ 7 HPFS/NTFS Partition 3 does not start on physical sector boundary. /dev/dm-0p4 64772 77827 104858625 5 Extended Partition 4 does not start on physical sector boundary. /dev/dm-0p5 64772 67204 19531008 83 Linux /dev/dm-0p6 67204 74498 58593536 83 Linux /dev/dm-0p7 74498 77577 24731648 83 Linux /dev/dm-0p8 77578 77827 2000128 82 Linux swap / Solaris I have used the Windows rescue CD, and run the automatic error fixer until it finds no errors. I have run chkdsk /R on both the main Windows 7 (/dev/dm-0p3) partition and the recovery partition (/dev/dm-0p2). I set the main Windows 7 partition to be active. I also tried running in the recovery console the commands bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd None of these helped and the last set of commands deletes grub, which I then have to reinstall from Ubuntu. I think the last thing I did in windows before this started was install the newest ATI driver for my video card. This would suggest using system restore, and I actually had a restore point earlier (after the problem started), but after whatever I did that restore point does not appear in the list on the recovery disk any more, so I cannot do a system restore. Is there anything else I can try to make Windows boot properly again? Edit: Running the suggested commands bootsect /nt60 c: bcdboot c:\windows /s c: was also ineffective.

  Read the article

• Partitioning & Linux

  - by Zac

  Every tutorial on Linux-based partitioning schemes (or, just partitioning in general) will tell you that a PC can have either 4 primary partitions, or 3 primaries and 1 extended. They will all also tell you that Linux (in my case, Ubuntu) can be installed on either. It's also come to my attention that it is not too atypical for FHS directories, such as usr/, tmp/, etc/, home/ or var/ to be mounted separately on other partitions. Several questions I am unable to find the answers to, purely for my own edification: (1) By "PC", are we really talking about common PC disk types, like IDE or SATA? I guess I'm wondering why PC uses are limited to 4 primaries or 3 primaries + 1 extended (2) I'm choking on some basic OS concepts: it is said that a partition can be mounted by a file system or an OS. So I assume this means I can somehow instruct Ubuntu to mount to 1 partition, and then any part of, say, ReiserFS, to be mounted to another partition? How? (3)(a) What about creating swap partitions? Is there too much of a good thing with swap partitioning? If I have 4GB RAM over 320GB disk, what should my swap partition size be, and why? (3)(b) Are swap files the only way to create swap partitions? Wouldn't a Linux partitioning utility allow me to define a partition as being for virtual memory only? (4) Why are partitions limited to being "mounted" by just OSes and file systems? Why couldn't I write a program to take up its own, say, 512 MB partition, and then have it invoked or uses by an OS installed on another partition? Thanks for shedding any light here... not critical that I know this stuff, but it's got me thinking incessantly. And when I think incessantly, I...can't......sleep....

  Read the article

• How to migrate WinXP from failing old HD to new one

  - by Péter Török

  Following this issue, we have all our important data backed up now. I also bought and installed a new replacement hard disk (WD 160GB PATA) as secondary (slave) drive. I created two primary NTFS partitions on it: a 40 GB system partition, and a 110GB data partition. In theory I could start reinstalling WinXP from scratch on the new system partition, then copying over all user data from the old drive to the new data partition. Once this is done, I could even throw away the old drive, or keep it just to see what happens. (Note: I don't want to clone the whole drive as it contains a dual boot setup with an old Linux installation which I don't need anymore, and anyway, a fresh reinstall would do WinXP good to get rid of many years' clutter.) However, I am lazy :-) The old HD is still functioning, the problem has not manifested again since. So I feel there is no need to hurry with a complete OS reinstall. What I don't know though is whether I will be able to install WinXP on the new system partition at a later stage without affecting the contents of the data partition on the same drive. If this is possible, I can just move over all our data to the new data partition to have it safe, then continue running WinXP from the old drive as long as it works. Does anyone see any problems/risks with this plan?

  Read the article

• Regarding partitions for dual-booting Ubuntu with pre-existing Windows 7

  - by Shasteriskt

  I have zero actual experience with configuring disk partitions and the stuff I have read for the past few hours have been confusing me a bit, so please bear with me. First of all, I'd like to explain what I'm setting to achieve: Windows 7 with: C:\ Windows 7 (pre-existing installation) D:\ Data (Already exists and has files already) Ubuntu 11 - Does not exist yet, but I already have a LiveCD in hand. \root directory for Ubuntu \home on its own partition I plan \swap on its own partition with around 8GB Here is the current situation: I have a single 500 GB hard-disk with Windows 7 x64 installed, and the current partition schemes is as follows: System Reserved: 100 MB (Primary, Active) C: 100 GB - Where Windows 7 is installed (Primary) D: 365 GB - Where my files are located, LOTS of free space (Primary) Now, I would like to shrink my D: drive and create around 40 GB of unallocated disk space for the Ubuntu installation, but here what's confusing me a bit: I'm thinking I would create an extended partition and subdivide it into 3 logical partitions for the Ubuntu setup I had in mind. (If you think my setup is a bad idea, please let me know & why. I also hope you can suggest a better one...) I am aware that I can only have up to 4 primary partitions, or 3 primary partitions with 1 extended parition max. Now, does the System Recovery portion count as one primary partition? I'm really new to these things and it is totally unclear to me. In shrinking my D: drive using Windows 7's Disk Management tool, I would get an unallocated free space which I don't know how to make an extended partition from. It seems like I can only create a primary partition from it, not an extended one. How do I go about it? (I'd also like to note, if it is of any importance, that I am trying to avoid using the option to install Ubuntu alongside Windows, and much rather prefer using the custom install where I can specify which drives I wish to use and stuff. Somehow I feel its safer that way.)

  Read the article

• How to setup RAID 1 with Intel RST on an existing Windows 7 system?

  - by instcode

  I'd like to setup RAID-1 using Intel Rapid Storage Technology on my Windows 7 64-bit system. I have an 1TB SATA HDD with Windows 7 system installed on the first primary partition (leftmost, ~200GB). The rest of this HDD is unallocated (~800GB). I bought another 2TB SATA, then created a primary partition (leftmost, ~500GB) and filled my data in. The rest of this HDD is unallocated (~1.5TB). A quick disk layout (XXX is the unallocated region): HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXXXXXXXX ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXXXXXXXX ] Now, I want to create a 500GB RAID-1 partition (I'm not sure if using "partition" is correct here) on the rightmost of the 2 HDDs above without losing any existing data from both disks. Here is the expected layout: HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXX | 500GB D:\ DATA - RAID-1 ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXX | 500GB D:\ DATA RAID-1] Let's not concern about data lost, is it possible to have that final layout using Intel RST? Previously, I tried this layout using dynamic disk & software RAID from Windows and it worked as expected, however, it's quite ugly in resynching after an OS failure that I don't want. If yes, is there a way to keep the data on existing partitions untouched or, at least, it should keep the SYSTEM partition safe (I'm okay if the PROGRAM partition has to be gone.)? Well, are there any strict/special steps I should follow when using the Intel RST manager in order to achieve that? If none of those questions above are "Yes", could you please suggest some other possible layouts that leave the C:SYSTEM partition untouched?

  Read the article

• Clone a Windows Installation to a 3TB Hard Drive; MBR to GPT

  - by DanBlakemore

  I have Windows 7 Professional 64-bit installed on my desktop. Unfortunately for me and my wallet my hard drive is failing. I have purchased a 3TB hard drive as a replacement for my current 2TB drive. I would like to avoid as much hassle as possible in moving to this new drive so I would like to copy my current partition to the new drive using Gparted. The problem is that I suspect that my current partition is MBR, and I need GPT on my new drive since it is 3TB. Can I simply copy the MBR partition onto the new disk and then convert it to GPT after the fact (can you even convert the type of a partition)? Or would I need to somehow copy the contents of the partition into a GPT partition on the new drive? How do I go about making this transistion? Also, are there any issues I should be wary of booting to a GPT partition? If it matters, my motherboard is 1 year old as of May, 2012. Edit: My motherboard is 1 day old. My old one does not have UEFI compatibility, so I decided to make an upgrade to Intel today given that I would need a UEFI motherboard to use my new HDD. How much can I use a dying hard drive (bad sectors according to Hitachi Drive Fitness Test)? I have assumed not at all, to be safe.

  Read the article

• Hibernation fails; The system cannot find the file specified

  - by GMMan

  Recently I installed Ubuntu 12.04.1 LTS on my Lenovo Y480. Hibernation was working properly after the Ubuntu install, but I was making sure all of the operating systems on my system worked, including OneKey Recovery (recovery partition). It is of note that I installed Windows 7 from scratch with a disk image I downloaded off of my university's DreamSpark program, and further to that I had to image the partition with Paragon Backup & Recovery, repartition to convert the Windows partition to extended, install Ubuntu, and then restore the image. During that process I also used the Windows disc to edit the BCD as to reuse the existing entry for the restored partition. I also used the automated "repair your computer" option. With verification, I noticed that the "repair your computer" option actually wrote to the wrong BCD (the recovery partition), and I mounted the partition and restored the original BCD (from a copy I made earlier), and rebooted. At this point my GRUB broke, and I was able to restore it. At this point hibernation broke. I tried powercfg /h off and powercfg /h on, rebooted, and nothing. Also tried increasing the hibernation file size as directed on this post, but it still doesn't work. Executing shutdown /h yields The system cannot find the file specified.(2). What file? It seems that mounting the system partition sometimes works, but I don't want to keep it mounted in case it gets written to accidentally. How do I permanently fix this?

  Read the article

• Ubuntu 12.04 can't boot after installing with software RAID 1

  - by Bill

  I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >