Search Results

Search found 3186 results on 128 pages for 'poh sun'.

Page 84/128 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• Upon reboot, Linux software raid fails to include one device of a RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

  Read the article

• convert bat to sh

  - by Cris

  I am totally new to scripting in linux...so i want to port some simple window bat files to ubuntu. First file is easy setenv.bat set ANT_HOME=c:\ant\apache-ant-1.7.1 set JAVA_HOME=c:\java in linux i did this and it seems ok setenv.sh #!/bin/bash JAVA_HOME=/usr/lib/jvm/java-6-sun-1.6.0.24/ ANT_HOME=/usr/share/ant echo $JAVA_HOME echo $ANT_HOME but now i want to port this bat file: startserver.bat call ../config/setenv call %ANT_HOME%/bin/ant -f ../config/common.xml start_db call %ANT_HOME%/bin/ant -f ../config/common.xml start_server pause but i have no clue how can i do this in linux call ../config/setenv thank you for any help , direction given.

  Read the article

• What is the data transfer speeds within the disk, to other devices?

  - by Kumar

  I use Debian 6 on a HP Elitbook 6930 with 2Gigs of RAM. I was copying two AVI files, 1.5 GB in total, and noticed that the data copying was done at the rate of 4MB/sec. When I copy same AVIs to my Western Digital Passport 25G USB plugin drive the data transfer speed is 11+MB/sec. This speed is different if I plugin the drive to different USB ports. Interestingly, at work I also downloaded a 16MB IE8 exe on my virtual xp, run inside Oracle Sun Virtual Box, and it was downloaded AND saved within a second. We have a high speed network at work. :-) Why and how this difference in data speeds is possible?

  Read the article

• How to Deploy a Directory or WAR in TOMCAT6 using ANT?

  - by Hitesh

  I want to deploy directory which is extraction of .war file using ANT in Tomcat6. I have build.xml like <property name="WAR_PATH" value="E:/18-06-2013/TEST"/> <property name="mgr.context.path" value="/FOUR"/> <property name="url" value="http://localhost:8080/manager"/> <property name="username" value="tomcat"/> <property name="password" value="password"/> <target name="deploy" description="Install web application" > <deploy url="${url}" username="${username}" password="${password}" path="${mgr.context.path}" war="file:${WAR_PATH}"/ But when i run the ANT(build.xml) script i get error something like java.io.IOException: too many bytes written at sun.net.www.protocol.http.HttpURLConnection$StreamingOutputStream.write(HttpURLConnection.java:2632) at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65> Same script work properly when i try to deploy .war file But ANT(build.xml) script not work properly in case directory. I have also try to deploy directory using HTTP command it work properly.

  Read the article

• Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

  - by 2020mobile

  Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them. Both lines go into a Cisco 2600 series router that then has a PIX firewall off that. Connectivity is successful just gone really slow and unable to download anything. Config is below: version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ROUTER-ADSL-INTERNET ! logging buffered 16384 informational enable secret xxx enable password xxx ! username xxx username xxx clock summer-time UK recurring last Sun Mar 1:00 last Sun Oct 1:00 aaa new-model ! ! aaa authentication login default local aaa authorization exec default local aaa session-id common ip subnet-zero no ip source-route ! ! ! ip audit notify log ip audit po max-events 100 no ip bootp server ip name-server 213.208.106.212 no mpls ldp logging neighbor-changes no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! ! interface ATM0/0 description 01270 111111 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/0 ip address 82.133.32.9 255.255.255.248 shutdown speed 100 full-duplex no cdp enable ! interface ATM0/1 description 01270 222222 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/1 ip address 217.146.115.49 255.255.255.240 duplex auto speed auto no cdp enable ! interface Dialer0 ip address 217.146.115.250 255.255.255.248 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password 7 xxxxx ppp multilink ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! no logging trap access-list 10 permit 217.146.115.50 access-list 10 permit 82.133.32.10 access-list 10 deny any access-list 22 permit 217.146.115.50 access-list 22 permit 217.206.239.86 access-list 22 permit 82.133.32.10 access-list 22 deny any dialer-list 1 protocol ip permit no cdp run ! ! snmp-server community xxxxxx RO 10 snmp-server enable traps tty radius-server authorization permit missing Service-Type ! ! ! ! ! ! line con 0 exec-timeout 5 0 password 7 xxxxxx line aux 0 no exec line vty 0 4 access-class 22 in exec-timeout 5 0 password 7 xxxxxx transport input telnet ssh transport output none line vty 5 15 password 7 xxxxxx transport input telnet ssh ! ntp clock-period 17180095 ntp server 130.88.200.98 ! ! end Now my knowledge is very limited but ISP have said that while the lines are bonded each needs a seperate login as they've recently changed their L2TP router and that enforces the use of seperate logins - when the lines were configured we were given two logins. So, my question is what changes do I need to make to the config in order to get this working? it was ok before their change and I do have another login :- 01270 111111 - [email protected] 01270 222222 - [email protected] Apologies for the long email and thanks for taking the time to read it. Any more info I can provide please let me know. Thanks,

  Read the article

• Ironport X-Junk header.

  - by Kyle

  My school uses Ironport for filtering/monitoring web traffic. I have a bit of curiosity as to why it tacks on a x-junk: header onto everything. After going through a few curl tests, I've found no real connection between what is shown on the page and the x-junk: header. here's my curl request: any ideas? Anchorage:~ khotchkiss$ curl -I google.com HTTP/1.1 301 Moved Permanently Location: http://www.google.com/ Content-Type: text/html; charset=UTF-8 Date: Sun, 06 Feb 2011 04:37:25 GMT Expires: Tue, 08 Mar 2011 04:37:25 GMT Cache-Control: public, max-age=2592000 Server: gws X-XSS-Protection: 1; mode=block Content-Length: 219 Age: 108 Via: 1.1 MC-IRONPORT.UNIVERSITY.LIBERTY.EDU:80 (IronPort-WSA/6.3.3-015) Connection: keep-alive X-Junk: xxxxxxxxxxxxxxxxxxxxxxx

  Read the article

• Nexenta/OpenSolaris filer kernel panic/crash

  - by ewwhite

  I've an x4540 Sun storage server running NexentaStor Enterprise. It's serving NFS over 10GbE CX4 for several VMWare vSphere hosts. There are 30 virtual machines running. For the past few weeks, I've had random crashes spaced 10-14 days apart. This system used to open OpenSolaris and was stable in that arrangement. The crashes trigger the automated system recovery feature on the hardware, forcing a hard system reset. Here's the output from mdb debugger: panic[cpu5]/thread=ffffff003fefbc60: Deadlock: cycle in blocking chain ffffff003fefb570 genunix:turnstile_block+795 () ffffff003fefb5d0 unix:mutex_vector_enter+261 () ffffff003fefb630 zfs:dbuf_find+5d () ffffff003fefb6c0 zfs:dbuf_hold_impl+59 () ffffff003fefb700 zfs:dbuf_hold+2e () ffffff003fefb780 zfs:dmu_buf_hold+8e () ffffff003fefb820 zfs:zap_lockdir+6d () ffffff003fefb8b0 zfs:zap_update+5b () ffffff003fefb930 zfs:zap_increment+9b () ffffff003fefb9b0 zfs:zap_increment_int+68 () ffffff003fefba10 zfs:do_userquota_update+8a () ffffff003fefba70 zfs:dmu_objset_do_userquota_updates+de () ffffff003fefbaf0 zfs:dsl_pool_sync+112 () ffffff003fefbba0 zfs:spa_sync+37b () ffffff003fefbc40 zfs:txg_sync_thread+247 () ffffff003fefbc50 unix:thread_start+8 () Any ideas what this means?

  Read the article

• Why is this LTO4 Tape-drive not working

  - by Tim Haegele

  # modprobe mptsas # dmesg [ 4274.796796] scsi target7:0:0: mptsas: ioc1: delete device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4274.939579] mptsas 0000:01:00.0: PCI INT A disabled [ 4280.934531] Fusion MPT SAS Host driver 3.04.12 [ 4280.934552] mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4280.934692] mptbase: ioc2: Initiating bringup [ 4281.490183] ioc2: LSISAS1064E B3: Capabilities={Initiator} [ 4281.490203] mptsas 0000:01:00.0: setting latency timer to 64 [ 4293.555274] scsi8 : ioc2: LSISAS1064E B3, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=16 [ 4293.574906] mptsas: ioc2: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4293.576471] scsi 8:0:0:0: Sequential-Access IBM ULTRIUM-HH4 B6W1 PQ: 0 ANSI: 6 [ 4293.578549] st 8:0:0:0: Attached scsi tape st0 [ 4293.578550] st 8:0:0:0: st0: try direct i/o: yes (alignment 512 B) [ 4293.578577] st 8:0:0:0: Attached scsi generic sg5 type 1 # mt -f /dev/st0 status mt -f /dev/st0 status mt: /dev/st0: rmtopen failed: Input/output error # dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 dd: opening `/dev/nst0': Input/output error I am running debian squeeze 2.6.32-5-amd64 #1 SMP Sun May 6 04:00:17 UTC 2012 x86_64 GNU/Linux Server is Fujitsu TX140 with Controller Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS Tape+Hardware is new.

  Read the article

• What is /opt/sun_docs used for, in Solaris 10?

  - by benc

  Solaris 10, SPARC. While trying clean up my "/opt" directory, I saw the "sun_docs" directory. I scanned the contents with "du -a", and also found a single, possibly related file (/var/opt/sun_docs/sundocs.html). If I understand correctly, it looks like a local set of HTML files, designed to be ready by a locally running browser? It looks like it could be shared via http, if an admin knew how to turn that on. I did google and check docs.sun.com. -ben

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS storage solutions. In addition, what effect does battery-backed write cache (BBWC) have in ZFS storage?

  Read the article

• I can't run uwsgi as normal user

  - by atomAltera

  I want to run uwsgi server as www user, but if I write: uwsgi --socket $SOCKET --chmod-socket 666 --pidfile $PIDFILE --daemonize $LOGFILE --chdir $CHDIR --pp $PYTHONPATH --module main --post-buffering 8192 --workers 1 --threads 10 --uid www --gid www A socket creation error occurs: Log: 1 *** Starting uWSGI 1.4.1 (64bit) on [Mon Dec 10 22:15:23 2012] *** 2 compiled with version: 4.4.5 on 17 November 2012 23:31:14 3 os: Linux-2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 4 nodename: autoblog 5 machine: x86_64 6 clock source: unix 7 pcre jit disabled 8 detected number of CPU cores: 2 9 current working directory: / 10 writing pidfile to /tmp/uwsgi_mysite.pid 11 detected binary path: /usr/local/bin/uwsgi 12 setgid() to 1002 13 set additional group 1004 (files) 14 setuid() to 1002 15 *** WARNING: you are running uWSGI without its master process manager *** 16 your memory page size is 4096 bytes 17 detected max file descriptor number: 1024 18 lock engine: pthread robust mutexes 19 unlink(): Operation not permitted [core/socket.c line 109] 20 bind(): Address already in use [core/socket.c line 141]

  Read the article

• Sending email using SMTP (Gmail) from Hudson CI

  - by jensendarren

  How can I set up Hudson CI so that I can send out emails from the server following a build failure? At the moment all I get is the following error: com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.0 Must issue a STARTTLS command first One solution is to start Hudson as follows: java -Dmail.smtp.starttls.enable="true" -jar /usr/share/hudson/hudson.war However, I am already using the following to start Hudson: sudo /etc/init.d/hudson start I am thinking the solution is to somehow set the system property mail.smtp.starttls.enable in a property file somewhere, but I have no idea how to do that. What are my options? Thank you all in advance!

  Read the article

• Solr 3 with jetty and ubuntu 11.10

  - by john

  I'd like to install solr 3. It will accept connections only locally. I read that jetty takes less memory than tomcat. I have Ubuntu 11.10 server. There is no clear tutorial about it anywhere on the internet. Most of them are old and talking about other combinations. I tried some of them, but didn't succeed in making it work. I'd prefer using packages with apt-get, but if the packages are not updated, I may install each part manually. Also, some tutorials say to install openjdk-6-jdk and other sun-java6-jdk. What's the difference? What are the steps to set up solr 3 + jetty in ubuntu 11.10?

  Read the article

• Setting up SSL on Glassfish V2 or V3

  - by javanix

  My employer recently purchased a Trustwave SSL certificate. Trustwave advertises support on their website, but they don't give an installation guide like they do for their other servers at all, and I am having a difficult time getting it configured correctly with GlassFish. I found this http://blogs.sun.com/enterprisetechtips/entry/using_ssl_with_glassfish_v2 blog post that is sort of helpful, but I'm still unable to get it working (I think the issue is that I don't fully understand the GlassFish keystore, so I am modifying it incorrectly and the server throws security exceptions on startup). Does anyone have any experience doing so, and can you point me to a decent resource? Thanks for any help.

  Read the article

• Mapping tomcat apache worker

  - by metamorpheus

  I am running an Apache2 server connected with Tomcat5.5 Workers.properties workers.tomcat_home=/usr/share/tomcat5.5 workers.java_home=/usr/lib/jvm/java-6-sun ps=/ worker.list=worker1 worker.worker1.port=8009 worker.worker1.host=127.0.0.1 worker.worker1.type=ajp13 worker.worker1.lbfactor=1 The JkMount is defined as follows LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/mod_jk.log JkLogLevel debug JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " JkMount /jsp-examples worker1 JkMount /jsp-examples/* worker1 JkMount /servlets-examples worker1 JkMount /servlets-examples/* worker1 JkMount /tcontainer worker1 JkMount /tcontainer/* worker1 If i call 127.0.0.1/servlets-examples, i get the examples displayed and executed correctly. If i call [same server as above]/tcontainer, i get the following error: The requested resource (/tcontainer) is not available. (this is an error provided by tomcat5.5) How can i define where to get the sources? i have a configuration file in /usr/share/tomcat-5.5-webapps/tcontainer.xml: <Context path="/tcontainer" docBase="/var/www/web96/html/tcontainer" debug="0" privileged="true" allowLinking="true"> </Context> What did i forget to configure or what is wrong with my definitions? Thanks

  Read the article

• Solaris Non global Zone x server

  - by ankimal

  I am not even sure if this is possible but how can I start an X server on a non-global zone? If I run startx from within my zone. I created the xorg.conf by running /usr/X11/bin/xorgconfig root@foo:/usr/X11/bin# startx xauth: creating new authority file /root/.serverauth.20957 X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: SunOS 5.11 snv_108 i86pc Current Operating System: SunOS dsol101 5.11 snv_111b i86pc Build Date: 07 May 2009 04:44:56PM Solaris ABI: 64-bit SUNWxorg-server package version: 6.9.0.5.11.11100,REV=0.2009.05.07 SUNWxorg-mesa package version: 6.9.0.5.11.11100,REV=0.2009.04.02 Before reporting problems, check http://sunsolve.sun.com/ to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 10 19:17:53 2009 (==) Using config file: "/etc/X11/xorg.conf" Fatal server error: xf86OpenConsole: Cannot open /dev/fb (No such file or directory)

  Read the article

• udev: waiting for uevents to be processed on my Gentoo

  - by stan31337

  During the startup I see machine executing this thing for about 30 seconds: udev: waiting for uevents to be processed Then I get a quick message which says something like: devfs: timeout (50 seconds) I can't see the whole thing because after that system starts up very fast including Xfce. What logs and configs do I need to provide for further investigation? $uname -a Linux genta 3.6.6-gentoo #1 SMP Sun Nov 11 11:02:23 NOVT 2012 i686 Genuine Intel(R) CPU T2300 @ 1.66GHz GenuineIntel GNU/Linux Thank you! UPD: rc-status genta / # rc-status sysinit Runlevel: sysinit dmesg [ started ] udev [ started ] devfs [ started ] genta / # rc-status boot Runlevel: boot hwclock [ started ] modules [ started ] fsck [ started ] root [ started ] mtab [ started ] localmount [ started ] sysctl [ started ] bootmisc [ started ] hostname [ started ] termencoding [ started ] keymaps [ started ] net.lo [ started ] swap [ started ] urandom [ started ] procfs [ started ]

  Read the article

• alternatives to SGE

  - by bmargulies

  Once upon at time there was the free SGE from Sun. tricky to install and configure, but functional and free. Now we've got: open source packages on Ubuntu that don't quite work out of the box (details on request). the actual source behind them, with a build process that depends on the c-shell and other obsolescences, available from two competing locations. a commercial packaging from Oracle a commercial package from Univa What I am really wishing for is something with the basic capabilities of this that is simple to install and maintain. Heck, I'd take a front-end to hadoop that just queues and distributes simple shell-script-defined jobs.

  Read the article

• Sending email using smpt (Gmail) from Hudson CI

  - by jensendarren

  How can I set up Hudson CI so that I can send out emails from the server following a build failure? At the moment all I get is the following error: com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.0 Must issue a STARTTLS command first One solution is to start Hudson as follows: java -Dmail.smtp.starttls.enable="true" -jar /usr/share/hudson/hudson.war However, I am already using the following to start Hudson: sudo /etc/init.d/hudson start I am thinking the solution is to somehow set the system property mail.smtp.starttls.enable in a property file somewhere, but I have no idea how to do that. What are my options? Thank you all in advance!

  Read the article

• Access forbidden! using xampp on macosx 10.5

  - by erikvold

  I installed xampp back around January 2009, and CF8 to test coldfusion on my macbook (note: I do not think that this issue is related to CF, but only xampp). I only ever used the apache part of xampp, and this was working for over a year. In the last couple of months at the most I've started getting the following error message (even for none CF sites, and non .cfm pages, the error occurs for .html files..): Access forbidden! You don't have permission to access the requested object. It is either read-protected or not readable by the server. If you think this is a server error, please contact the webmaster Error 403 erikvold.lan Sun Mar 21 20:58:45 2010 Apache/2.2.11 (Unix) DAV/2 mod_ssl/2.2.11 OpenSSL/0.9.7l PHP/5.2.9 mod_perl/2.0.4 Perl/v5.10.0 As far as I recall I haven't made any change, so it's like it was working for a year then just stopped working..

  Read the article

• Debian server doesn't free memory after backup

  - by stan31337

  I have production server that is running Debian 6.0.6 Squeeze #uname -a Linux debsrv 2.6.32-5-xen-amd64 #1 SMP Sun Sep 23 13:49:30 UTC 2012 x86_64 GNU/Linux Every day cron executes backup script as root: #crontab -e 0 5 * * * /root/sites_backup.sh > /dev/null 2>&1 #nano /root/sites_backup.sh #!/bin/bash str=`date +%Y-%m-%d-%H-%M-%S` tar pzcf /home/backups/sites/mysite-$str.tar.gz /var/sites/mysite/public_html/www mysqldump -u mysite -pmypass mysite | gzip -9 > /home/backups/sites/mysite-$str.sql.gz cd /home/backups/sites/ sha512sum mysite-$str* > /home/backups/sites/mysite-$str.tar.gz.DIGESTS cd ~ Everything works perfectly, but I notice that Munin's memory graph shows increase of cache and buffers after backup. Then I just download backup files and delete them. After deletion Munin's memory graph returns cache and buffers to the state that was before backup. Here's Munin graph: Unfortunately I don't have enough rep to add image here. So here's a link:

  Read the article

• verisign certificate into jboss server SSL

  - by rfders

  Hi all, i'm trying to enable jboss to uses ssl protocol using a previously generated certificate from verisign, i imported both certificate, server certificate and ca certificate into the keytore file, and i configured the server.xml to use that keystore and activate ssl protocol, then when i run the jboss, I got this error "certificate or key corresponds to the SSL cipher suites which are enabled" Question, reading some post on internet, i found that every example was made it generating a Certificate Request, it stricly necesary to do that if i already have the server certificate and that CSR has to be imported into the keystore as well ? at this point i'm very confused about this issue, i tried almost every solutions posted in several forums but till now i haven't any luck !! can you give me some tips in order to solve this problem. thanks in advance this are my keystore file: Keystore type: jks Keystore provider: SUN Your keystore contains 2 entries j2ee, Dec 29, 2009, trustedCertEntry, Certificate fingerprint (MD5): 69:CC:2D:2A:2D:EF:C4:DB:A2:26:35:57:06:29:7D:4C ugent, Dec 29, 2009, trustedCertEntry, Certificate fingerprint (MD5): AC:D8:0E:A2:7B:B7:2C:E7:00:DC:22:72:4A:5F:1E:92 and my server.xml configuration:

  Read the article

• X11 tunnelling through SSH from Fedora 3 server to Windows Vista client fails to work.

  - by MiffTheFox

  Okay, I've tried using Xming and PuTTY, as well as Cygwin/X and Cygwin ssh, and it is not working. I've been able to run X applications locally, so it's not a client-side X problem. I've connected to the server using ssh -X user@server and ended up with this: local-user@client: ~$ ssh -X user@server user@server's password: Last login: Sun Jul 19 15:26:46 2009 from 192.168.100.147 [user@server ~]$ xclock & [1] 27770 [user@server ~]$ Error: Can't open display: localhost:10.0 [1]+ Exit 1 xclock [user@server ~]$ [user@server ~]$ Here's the relevant snippet of my sshd_config #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost yes I can't seem to find ssh_config on the client-side. /etc/ssh doesn't exist.

  Read the article

• How does java permgen relate to code size

  - by brad

  I've been reading a lot about java memory management, garbage collecting et al and I'm trying to find the best settings for my limited memory (1.7g on a small ec2 instance) I'm wondering if there is a direct correlation between my code size and the permgen setting. According to sun: The permanent generation is special because it holds data needed by the virtual machine to describe objects that do not have an equivalence at the Java language level. For example objects describing classes and methods are stored in the permanent generation. To me this means that it's literally storing my class def'ns etc... Does this mean there is a direct correlation between my compiled code size and the permgen I should be setting? My whole app is about 40mb and i noticed we're using 256mb permgen. I'm thinking maybe we're using memory that could be better allocated to dynamic code like object instances etc...

  Read the article

• [metasploit] Has anyone gotten multi/browser/java_signed_applet to work?

  - by marc

  Welcome, Today i want test following exploit "exploit/multi/browser/java_signed_applet" on my Ubuntu 10.04 desktop using Metasploit framework. I'm following that guide: http://pauldotcom.com/wiki/index.php/Episode185 When im trying to start exploit, i got error: JVM not initialized. You must install the Java Development Kit, the rjb ruby gem, and set the $JAVA_HOME variable. [-] Falling back to static signed applet. This exploit will still work, but the CERTCN and APPLETNAME variables will be ignored. I have installed sun-java6-jdk, and gem install rjb And patch to JAVA look working because: ls $JAVA_HOME bin ext jre LICENSE README.html COPYRIGHT include lib man THIRDPARTYLICENSEREADME.txt If anyone, have any idea... Except installation of backtrack what is not possible... Because i need use it on my Ubuntu, (have to virtualize XP for test) regards

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >