Search Results

Search found 37152 results on 1487 pages for 'shared access'.

Page 84/1487 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • How would I instruct extconf.rb to use additional g++ optimization flags, and which are advisable?

    - by mohawkjohn
    I'm using Rice to write a C++ extension for a Ruby gem. The extension is in the form of a shared object (.so) file. This requires 'mkmf-rice' instead of 'mkmf', but the two (AFAIK) are pretty similar. By default, the compiler uses the flags -g -O2. Personally, I find this kind of silly, since it's hard to debug with any optimization enabled. I've resorted to editing the Makefile to take out the flags I don't like (e.g., removing -fPIC -shared when I need to debug using main() instead of Ruby's hooks). But I figure there's got to be a better way. I know I can just do $CPPFLAGS += " -DRICE" to add additional flags. But how do I remove things without editing the Makefile directly? A secondary question: what optimizations are safe for shared objects loaded by Ruby? Can I do things like -funroll-loops? What do you all recommend? It's a scientific computing project, so the faster the better. Memory is not much of an issue. Many thanks!

    Read the article

  • Accessing clearcase view drive from virtual machine is slow

    - by PermanentGuest
    I have a windows XP virtual machine running under a Windows XP host. On the host : On the host clearcase 7.1.1.2 is installed. I have a dynamic view mapped onto some drive. The view has certain VOB/directory structure where my application DLLs from the nightly build and config files are stored. I run my application on the host machine which uses the DLLs and config files from the VOB and everything runs smooth. Now I want to move this set-up to a virtual machine. On the guest : I'm running the guest with a vm-player. I don't want to install clear-case on this as I don't want to expose this machine onto the network. The network setting in the guest is 'host-only'. I have mapped the host's clearcase view drive as a shared folder and I'm able to access this drive from the virtual machine. Also, the application is running. However, the problem is that the access of the clearcase drive from the virtual machine is very slow. I can experience this from the windows explorer. Due to this, the starting of my application takes several seconds in the virtual machine while on the guest it comes up pretty fast. My question is : Is there any way to speed up the performance? I have managed to copy some of the DLLs which don't change frequently to the virtual machine to improve the performance. However, there are still lot of DLLs which have to be taken from the clearcase drive as they change frequently. VMplayer version is : VM Player 3.0.1 build-227600 Both guest and host is : Windows XP service pack 3 Host clearcase is : clearcase 7.1.1.2

    Read the article

  • How to access a row from af:table out of context

    - by Vijay Mohan
    Scenario : Lets say you have an adf table in a jsff and it is included as af:region inside other page(parent page).Now your requirement is to access some specific rows from the table and do some operations. Now, since you are aceessing the table outside the context in which it is present, so first you will have to setup the context and then you can use the visitCallback mechanism to do the opeartions on table. Here is the sample code: ================= final RichTable table = this.getRichTable();         FacesContext facesContext = FacesContext.getCurrentInstance();         VisitContext visitContext =   RequestContext.getCurrentInstance().createVisitContext(facesContext,null, EnumSet.of(VisitHint.SKIP_TRANSIENT,VisitHint.SKIP_UNRENDERED), null);         //Annonymous call         UIXComponent.visitTree(visitContext,facesContext.getViewRoot(),new VisitCallback(){             public VisitResult visit(VisitContext context, UIComponent target)               {                   if (table != target)                   {                     return VisitResult.ACCEPT;                   }                   else if(table == target)                   {                       //Here goes the Actual Logic                       Iterator selection = table.getSelectedRowKeys().iterator();                       while (selection.hasNext()) {                           Object key = selection.next();                           //store the original key                           Object origKey = table.getRowKey();                           try {                               table.setRowKey(key);                               Object o = table.getRowData();                               JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)o;                               Row row = rowData.getRow();                               System.out.println(row.getAttribute(0));                           }                           catch(Exception ex){                               ex.printStackTrace();                           }                           finally {                               //restore original key                               table.setRowKey(origKey);                           }                       }                   }                   return VisitResult.COMPLETE;               }         }); 

    Read the article

  • Access virtualhosts over LAN (Also in xpmode (Virtual PC))

    - by Pheter
    Hi, I am running Wamp on my computer (the host). I have set up several virtualhosts in apache and they are working fine when I access them from the same computer (host). I have installed Windows XPMode on my computer (which is running windows 7). XPMode (which uses Virtual PC) is set up to use a NAT network. The network in XPMode is working fine, and I can access the host PC via the IP address 192.168.1.5, just as I would if I was using any physical computer on the same network. I can view all the web pages at 192.168.1.5 and it's subdirectories. However, I cannot access any of the subdomains that are configured in the virtualhosts of the host computer. How can I access the subdomains? I don't think that the fact that I am using XPMode and am using a virtualized OS has anything to do with it, but I thought that it was worth mentioning.

    Read the article

  • Partition disk for dual boot Windows XP and Windows 7 (shared files)

    - by soupagain
    I wish to dual boot Windows XP and Windows 7. I wish to have my documents available from both OSes. Do I create a single partition and it just works? 2 partitions, one for each OS? 3 partitions, one for each OS and one for the "my documents"? [EDIT] I used 3 partitions, one for each partition and one for docs which is mapped as a separate drive. Works perfectly. The only think you need to do is hide the other OS partition, ie for Windows XP, hide the Windows 7 partition. You do this from partition manager.

    Read the article

  • WAMP, DD-WRT, Using DNSMasq to access multiple virtual hosts via aliases on local network

    - by christian
    I've updated my question to coincide with my progress I am attempting to configure WAMP on my development machine. I would like to use it in conjunction with DD-WRT's DNSMasq feature to access multiple virtual hosts via aliases (dev1.local,dev2.local,etc.) over my local wireless network. I have followed the following tutorial which allows me to setup virtual hosts and access on local network by ip addresses. http://www.logicspot.com/web-development-2/viewing-a-locally-hosted-website-with-your-smartphone/ I've got this up and running. For simplicity sake I'd still like to setup DNSMasq to connect via aliases. I have followed the following tutorial http://www.question-defense.com/2008/12/29/add-static-dns-entries-to-dd-wrt-router-firmware And the aliases load on my development machine, but I can not access via the aliases on my mobile devices connected to the local network. I can however access via IPs. Thanks for any help you can provide

    Read the article

  • SuperMicro BMC on OpenSuSE Linux --cannot access from LAN

    - by Kendall
    Hi, I have an (old) SMC-001 IPMI device on an (old) X6DVL-EG2 motherboard. My problem is that I cannot access the BMC from LAN. I'm also getting some interesting output from ipmitool. First, the setup. I enable Console Redirection in the BIOS, turn BIOS Redirection after POSt to "disabled". I then modprobe'ed for ipmi_msghandler, ipmi_devintf and ipmi_si. I then found ipmi0 under /dev. So far so good. Since I want console redirection over serial, I modified /boot/grub/menu.lst: http://pastebin.com/YYJmhusQ I then modified "/etc/inittab" as follows: S1:12345:respawn:/sbin/agetty -L 19200 ttyS1 ansi Networking I set as following, using "ipmitool" ipaddr: 192.168.3.164 netmask: 255.255.255.0 defgw: 192.168.3.1 The above are correct for my environment. To test it I do: ipmitool -I open chassis power off which responds by powering off the machine. When I to access from another computer on the network, however, I get an error message: host# ipmitool -I lanplus -H 192.168.10.164 -U Admin -a chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status "Admin" seems to be a valid user name: host# ipmitool -I open user list 1 2 Admin true false true USER The interesting output from ipmitool I initially mentioned: host # ipmitool -I open lan set 1 access on Set Channel Access for channel 1 failed: Request data field length limit exceeded Also, newload4:/home/gjones # ipmitool channel info 1 Channel 0x1 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : session-less Active Session Count : 0 Protocol Vendor ID : 7154 Get Channel Access (volatile) failed: Request data field length limit exceeded The output of "ipmitool -I open lan print 1" is here: http://pastebin.com/UZyL6yyE Any help/suggestions is greatly appreciated; I've been working with this thing for a few hours now with no success.

    Read the article

  • setting up synergy (multi-computer shared input devices) new to mac

    - by pedalpete
    I've just gotten a mac and the first thing I'm trying to do in setting it up for dev is to set-up synergy. I've run into countless issues, and am making progress, but that 'mac's just work' theory is getting tired really fast. I'd prefer running the mac as the server, as it's a desktop. why use my pc(laptop) as the server. So i downloaded synergy, and tried to edit the 'synergy.conf' file. First with textmate, then with apple script. Neither of these applications will open the file. Even after changing textmate to use plain text format and switching off a few other things to make it into a plain text editor. No good. Uh, isn't that what these script/text editors are for? Then I found SyneryKM which is a package to run synergy on osx. Took LOTS of fiddling, but I think I finally kinda got it figured out. I've got my pc & mac both running synergy. However, my pc will only connect to synergy using the ip address. No problem, however, my mac won't connect to itself as a synergy server using the IP address. If I use the ip address as a screen in the 'server configuration file', i get a 'Error: unknown screen name mymac'. I know this shouldn't be super complicated, and possibly not the place to find answers about synergy, but I couldn't find a better place, and there has been some talk of synergy here. Any chance somebody can help with this?

    Read the article

  • Partition disk for dual boot Windows XP and Windows 7 (shared documents)

    - by soupagain
    I wish to dual boot Windows XP and Windows 7. I wish to have my documents available from both OSes. Do I create a single partition and it just works? 2 partitions, one for each OS? 3 partitions, one for each OS and one for the "my documents"? [EDIT] I used 3 partitions, one for each partition and one for docs which is mapped as a separate drive. Works perfectly. The only think you need to do is hide the other OS partition, ie for Windows XP, hide the Windows 7 partition. You do this from partition manager.

    Read the article

  • AsteriskNow Migration / Shared Extension Space

    - by Aaron C. de Bruyn
    I am testing the possibility of migrating from an old Avaya phone system to AsteriskNow. The migration would cover several hundred phones--but spread out over several years. (Management wants to move buildings to the new phone system one by one as cables get cut or time permits.) Two other directive is that extensions must not change and they want a GUI that other admins (non-Linux geeks) can manage. They currently use 9XXX for all extensions. We linked the Avaya and Asterisk box via PRI card and they both are communicating. From the Avaya side, if we move (for example) extension 9001 to Asterisk, we forward the call over the PRI to the AsteriskNow box and the SIP phone rings. In AsteriskNow we have an outgoing rule '_9XXX' that routes all 4-digit extensions starting with 9 back to Avaya. Here's the trouble. Dialing 9001 (the extension moved over to AsteriskNow) causes the call to be routed out the PRI to the Avaya box, then the Avaya box routes the call back to Asterisk, and Asterisk routes it to the SIP phone. As we get more and more users switched over, it will use up more and more channels over the PRI card. Is there a way I can ask Asterisk to check it's local extensions first--then forward off to the Avaya system if it starts with '_9XXX'? (I know how I can do it when editing the raw config files, I'm just looking for a way to do it in the GUI so other admins can manage it if necessary.) As a last-ditch plan, I know I can specifically add '_9001' as an outgoing call rule and sent it directly to extension 9001--but I'd really hate to do that for several hundred phones

    Read the article

  • Citrix XenServer iSCSI shared disk?

    - by chsguy
    I am running Citrix XenServer Essentials 5.5, with VMs stored on an EqualLogic iSCSI shelf, using XenServer's StorageLink. I would like to create a "virtual disk" that can be attached to multiple VMs. This would be used for a cluster file system like OCFS2 or GFS. This doesn't seem possible using the XenCenter GUI and I can't find anything online about how to do it. I realize I could simply expose the iSCSI network to the VM and have the VM initiate its own iSCSI, but that creates a lot of security challenges. This was pretty easy to do on Oracle VM Server, which is Xen based, so I know it's not a limitation of Xen itself. Maybe there is an "xe-" command for this? Thanks for any suggestions you can provide.

    Read the article

  • Root access on media temple.com dv server

    - by Chris M
    This may be a dumb question. I just purchased dv access at media temple.com. I set up root access as required, set up a root access password. Now, for the life of me I can not figure out how this password gets used. Everywhere i try to use the password it does not work. Even tried to ssh with Putty and that didnt work either. Can somebody possibly explain to me what this root access is and how I use it. Im a newbie just trying to learn something new.

    Read the article

  • Printing to a Windows 7 incompatible printer shared on supported Windows XP machine

    - by MGSoto
    I have an HP Laserjet 1500 that is supported by Windows XP, but not supported by Windows-7. I want to print from my 7 machine(s) to my XP machine on this printer. Is there some sort of way to send a generic job (like sending raw postscript or something) to the XP machine, which will then print it with the proper drivers? Is there a virtual printer that has drivers for both XP and 7 that will just re-print it on the XP machine using the real printer?

    Read the article

  • Proxy to restrict access to certain websites

    - by ChrisRamakers
    Hi all, I'm looking for a solution that allows our office server to function as a proxy that blocks access to certain websites for certain LAN ip's. The solution i'm looking for has to meet these requirements: run on ubuntu server restrict access to certain websites based on a LAN ip (eg: shut out xxx.com for 192.168.1.152) restrict access to a website based on the website url (eg: shut out *.facebook.com) easily configurable (preferably through a web interface, our office manager should be able to operate it thus no commandline fu if possible) preferably opensource Thanks for your time!

    Read the article

  • Cannot SVN checkout when anon-access = none

    - by sKIPper76
    When I have anon-access = write Everything works fine. When I change svnserve.conf to: anon-access = none auth-access = write And uncomment password-db and authz-db AND add user in authz with rw AND put username/password in passwd, nothing works. Eclipse keeps giving me a "Cannot map the project with svn provider" error. I have given all the files under conf 777. Any ideas what's wrong?

    Read the article

  • Mirror a Dropbox repository in Sharepoint and restrict access

    - by Dan Robson
    I'm looking for an elegant way to solve the following problem: My development team uses Dropbox for sharing documents amongst our immediate group. We'd like to put some of those documents into a SharePoint repository for the larger group to be able to access, as granting Dropbox access to the group at large is not ideal. However, we'd like to continue to be able to propagate changes to the SharePoint site simply by updating the files in Dropbox on our local client machines, and also vice versa - users granted access on SharePoint that update files in that workspace should be able to save their files and the changes should appear automatically on our client PC's. I've already done the organization of the folders so that in Dropbox, there exists a SharePoint folder that looks something like this: SharePoint ----Team --------Restricted Access Folders ----Organization --------Open Access Folders The Dropbox master account and the SharePoint master account are both set up on my file server. Unfortunately, Dropbox doesn't seem to allow syncing of folders anywhere above the \Dropbox\ part of the file system's hierarchy - or all I would have to do is find where the Sharepoint repository is maintained locally, and I'd be golden. So it seems I have to do some sort of 2-way synchronization between the Dropbox folder on the file server and the SharePoint folder on the file server. I messed around with Microsoft SyncToy, but it seems to be lacking in the area of real-time updating - and as much as I love rsync, I've had nothing but bad luck with it on Windows, and again, it has to be kicked off manually or through Task Scheduler - and I just have a feeling if I go down that route, it's only a matter of time before I get conflicts all over the place in either Dropbox, SharePoint, or both. I really want something that's going to watch both folders, and when one item changes, the other automatically updates in "real-time". It's quite possible I'm going down the entirely wrong route, which is why I'm asking the question. For simplicity's sake, I'll restate the goal: To be able to update Dropbox and have it viewable on the SharePoint site, or to update the SharePoint site and have it viewable in Dropbox. And since I'm a SharePoint noob, I'll also need help hiding the "Team" subfolder from everyone not in a specific group in AD.

    Read the article

  • Read access to Active Directory property (uSNCreated)

    - by Tom Ligda
    I have an issue with read access to the uSNCreated property when doing LDAP searches. If I do an LDAP search with a user that is a member of the Domain Admins group (UserA), I can see the uSNCreated property for every user. The problem is that if I do an LDAP search with a user (UserB) that is not a member of the Domain Admins group, I can see the uSNCreated property for some users (UserGroupA) and not for some users (UserGroupB). When I look at the users in UserGroupA and compare them to the users in UserGroupB, I see a crucial difference in the "Security" tab. The users in UserGroupA have the "Include inheritable permissions from this object's parent" unchecked. The users in UserGroupB have that option checked. I also noticed that the users in UserGroupA are users that were created earlier. The users in UserGroupB are users created recently. It's difficult to quantify, but I estimate the border between creation time between the users in UserGroupA and UserGroupB is about 6 months ago. What can cause the user creation to default to having that security property checked as opposed to unchecked? A while back (maybe around 6 months ago?) I changed the domain functional level from Windows Server 2003 to Windows Server 2008 R2. Would that have had this effect? (I can't exactly downgrade the domain functional level to test it out.) Is this security property actually the cause of the issue with read access to the uSNChanged property on LDAP searches? It seems correlated, but I'm not sure about causation. What I want in the end is for all authenticated users to have read access to the uSNCreated property for all users when doing an LDAP search. I would also be OK if I could grant read access for that property to an AD group. Then I can control access by adding members to the group.

    Read the article

  • Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

    - by develop7
    Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

    Read the article

  • Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

    - by Develop7
    Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

    Read the article

  • Windows 7 - How to access my documents from Windows 8 (dual boot)

    - by msbg
    I am dual booting Windows 7 and Windows 8 on two different partitions of the same drive: Win7: (C:) Win8: (D:) I am trying to get access to my Win7 user folder (C:\Users\Mason) in order to access my Win7 documents folder (C:\Users\Mason\Documents) from Windows 8. When I try to on Windows 8, I get an error message saying "You don't have permission to access this folder. Click here to permanently get access to this folder". When I click, the progress bar in Windows Explorer slowly moves to the maximum and disappears. When I try opening the folder, I get the same error message. When editing security permissions for the folder in Windows 8, Explorer freezes. I do not know how to remove the restrictions from Windows 7. I checked the Windows 8 user folder (D:\Users\Mason) and it had the group or user name: "S-1-5-21-936898901-3363470404-1273668825-1001". I tried copying and pasting it into the Win7 User Folder Permissions, but got the error "An object with the following name cannot be found". How would I access my folders?

    Read the article

  • Windows shared printers: Process job on server machine, not the client

    - by asr
    Hi. While working with Linux clients to Windows SMB/CIFS filesharing servers, from time to time I find myself having to print to a printer with no drivers available under Linux. For some reason, the Windows computer expects the job to be sent in an already processed format, so it can be fed directly to the printer in its own, weird language. It would be great if I could send the print job in Postscript or other standard format to the Windows computer sharing this printer, and then this PS could be processed under Windows. Is there a way to accomplish this? Because I don't seem to find the option. Thanks a lot.

    Read the article

  • Windows clients unable to access Samba share on AD joined Linux box every 7 days

    - by Hassle2
    The problem: Every 7 days, 2 Windows Servers are unable to access a SMB/CIFS share. It will start working after a handful of hours. The environment: OpenFiler Linux box joined to 2003 AD Domain Foreground app on Win2003 server access the SMB/CIFS share with windows credentials Another process on Win2008 access the share via SQL Server with windows credentials The Samba version on the Linux box is 3.4.5. Security is set to ADS wbinfo and getent return back expected users and groups Does not look to be a double hop issue as it's always the 2 accounts, regardless of the calling user. There is a DNS entry in both forward and reverse lookup zone for the linux box The linux box's computer object in active directory shows that it was modified around/at the same time that the two clients started failing to access the share Trying to access the share via IP works when by name does not Rebooting the Windows server takes care of it (it's production and only restarted it once) Restarting smbd, winbind, nmbd had no effect Error in samba log for the client in question: smbd/sesssetup.c:342(reply_spnego_kerberos) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! The Question: Does this look like the machine account password is changing (hence the AD object showing the updated modified date) or are the two windows clients unable to request a new ticket that works against this linux box?

    Read the article

  • Access Denied on a Drive where All Users list have been deleted in Security Tab

    - by darkstar13
    Hi All, (System is Windows 7 x64) I wanted to restrict access of other people in a certain drive of my computer (Harddisk 1 is partitioned to C & D; I want to restrict Drive D). What I did was go to the Security Tab (under Drive Properties) and remove the All Users entry. My account is an administrator account. I left only Systems and Administrator on the list. However, when I tried to access drive D, I got an Access Denied error, and Security Tab is already missing. I tried to edit Local Group Policy; it does not work. Take Ownership is not available for the Drive as well, but I see it enabled if I select files / folders. Please help. Thanks. Also, I am wondering why, as an Administrator, have my access to that drive denied.

    Read the article

  • VPN Connects with local access only

    - by user20102
    I have Windows Server 2008 and I have set up a VPN. When a user logs into their VPN they can not view the internet. It comes up as local access only on the the client PC. On the server when I go to the Network And Sharing Centre it displays (Network) with local and internet below it has the RAS Dial-in interface and it displays as local only there as well. I want all users that connect to my VPN to have internet access (full access). If anyone can help me it would be appreciated. Also I've activated dial-in properties and I've done it via policy who can access the VPN and internet. It still doesn't work, but there is a connection but just local only. Thanks

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >