Search Results

Search found 16183 results on 648 pages for 'visual studio (vs2005)'.

Page 84/648 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• User control always crashes Visual Studio

  - by NickAldwin

  I'm trying to open a user control in one of our projects. It was created, I believe, in VS 2003, and the project has been converted to VS2008. I can view the code fine, but when I try to load the designer view, VS stops responding and I have to close it with the task manager. I have tried leaving it running for several minutes, but it does not do anything. I ran "devenv /log" but didn't see anything unusual in the log. I can't find a specific error message anywhere. Any idea what the problem might be? Is there a lightweight editing mode I might be able to use or something? The reason I need to have a look at the visual representation of this control is to decide where to insert some new components. I've tried googling it and searching SO, but either I don't know what to search or there is nothing out there about this. Any help is appreciated. (The strangest thing is that the user control seems to load fine in another project which references, but VS crashes as soon as I even so much as click on it in that project.)

  Read the article

• Visual Studio 2008 Setup Project - Include .NET Framework 3.5

  - by rajadiga

  I built a Visual Studio 2008 setup Project wich depends on .NET 3.5. I added Prerequisites like: .NET 3.5, Microsoft office interoperability, VS tools for office System 3.0 Run time, .etc. After that Selected "Download Prerequisite from Same location as my application" in Specify install location for Prerequisite. I Built the setup and found mysetup.msi in Release directory. In a new machine I started fresh installation of my application. A dialog shows like this "This Setup Requires .NET framework 3.5 , Please install .NET setup then run this setup, .NET Framework can be obtained from web Do you want to do that now?" it gives "Yes" and "No" option - if I press yes it goes to Microsoft website. How can avoid it? I wanted setup take .NET Framework to be installed from same location where I put all setup files including mysetup.msi? In case of quiet installation cmd /c "msiexec /package mysetup.msi /quiet /log install.log" ..in log I can see only half way through installation then error Property(S): HideFatalErrorForm = TRUE MSI (s) (D0:24) [00:07:08:015]: Product: my product-- Installation failed. === Logging stopped: 3/23/2010 0:07:08 === How can complete I the installation without user intervention and without error using VS2008 setup project? Thanks for all the help in advance for any input.

  Read the article

• visual studio macro - copy a definition or declaration from/to .h to/from .cpp

  - by Michael

  Is it possible to do a macro that copies a definition of a function to a declaration, and also the opposite? For instance class Foo { Foo(int aParameter, int aDefaultParameter = 0); int someMethod(char aCharacter) const; }; from the .h file would be: Foo::Foo(int aParameter, int aDefaultParameter){ // } int Foo::someMethod(char aCharacter) const { return 0; } in the .cpp file. The opposite wouldn't work with the default value, but it would still be cool if it copied the declaration into the class in the header file. Also if it could return a default value as in someMethod (based on the return value from the declaration). Personally I tried to do macrocoding some year ago (I think it was around 2005) but the tutorials and documentation of macros was thin (or I hadn't searched enough). I ended up going through the examples that they had in the IDE but gave up when I figured it would take too long to learn. I would however like to give it a try again. So if there are anyone with knowledge of good tutorials or documentation that aims at Visual Studio .Net (and maybe also covers the above problem) I would probably accept that as an answer as well :)

  Read the article

• Visual studio feature - commenting code Ctrl K - Ctrl C

  - by Michael

  I commented on this answer some time ago regarding how visual studio comments out code with // or /* */. I was thinking to revise the answer (to include my findings) but I had to test it first, which kind of confused me. My finding is that depending on where your marker is when you press Ctrl - K, Ctrl - C you will get either // or /* */. So I tried it out on the following code: [1] [2]FD_ZERO(&mFSet); FD_SET(user->mSender, &mFSet); timeval zeroTime = { 0, 0 }; int sel = select(0, NULL, &mFSet, NULL, &zeroTime); [3] if (sel == SOCKET_ERROR){ [5]return false; [4] } if (sel == 0){ [6] return false; [7] } The [x] is markerpositions. All [1] positions give // for all marked lines. However Start position End Position: gives: [2] [3] : /* */ [2] [4] : // [2] [5] : /* */ [2] [more than 5] : // [5] [6] : /* */ [5] [7] : // I guess it has to do with forward indentation (not backwards), that whenever code is indented more than the starting line you get // except when you haven't selected any text on the indented line ([2] [5]). But why the distinction? Why not use /* */ for when you start at [2] and // when you start at [1]?

  Read the article

• Can't use Visual Studio 2008 Designer with MVVMLight V3 SP1

  - by mcauthorn

  I wish I knew what I did to cause this, but I cannot use the Visual Studio 2008 Designer at all with with MVVMLight templates. I receive a "Could not create an instance of type 'ViewModelLocator'. in any of my xaml pages. The application builds and runs fine but only the designer is broken. In the App.xaml is <Application x:Class="ExcelReportGenerator.App" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:vm="clr-namespace:ExcelReportGenerator.ViewModel" xmlns:res="clr-namespace:ExcelReportGenerator.Resources" Startup="Application_Startup" mc:Ignorable="d"> <Application.Resources> <!--Global View Model Locator--> <vm:ViewModelLocator x:Key="Locator" d:IsDataSource="True" /> </Application.Resources> I even receive the error when I create a brand new MVVMLight application. The interesting thing is if I use an express version of VS2010 I can view, edit and work in designer just fine. As much as I would love to go to VS2010, I can't right now convince IT to make that move.

  Read the article

• Visual studio erroneous errors when building a website?

  - by Curtis White

  Visual Studio 2008 shows a lot of erroneous errors when building a website (not a web project) in the errors list. These errors are usually corrected (removed) when I rebuild the site a couple times but they cost me wasted time. Is there anyway to hide the erroneous errors? Update: I've decided to look into this to see if I could reproduce it. This is the exact behavior I am seeing, using the website model, I type some invalid syntax on a page. The errors list fills up with errors. I correct the error and the errors list does not update. I build the project and the errors list still shows the errors but the build shows as build completed. I build the project a second time and the errors list is cleared. My question is there anyway to make the errors list clear on the first build? I thought it might have something to do with page build vs website build but it seems to make no difference. I am not using any third party dlls on this website.

  Read the article

• Travelling Visual Studio developers

  - by Graphain

  Hi, I am about to travel to Europe (I'm Australian but imagine this is a similar circumstance for US users and simply flipped for European users). However, there is the slim possibility I will need to do some Visual Studio work while I'm travelling. As I see it I have three options: Leave a desktop PC on at home, access remotely via net cafes. Carry a laptop with me on the trip, upload files as required using public wifi. Option 2 but instead buy cheap light netbook that is miraculously capable of running VS. Does anyone have any experience or advice to shed on any of these options? For reference, this existing post suggests that VS remotely for short distances is okay, but over longer distances could be more problematic. I've used VS via RDP to a US server before and it was pretty laggy but for small changes I could get by. Concerns I have that you may have some experience with: Weight of luggage (ideally like to travel light) Security of laptop (imagine it'll be too heavy to carry around all the time so have to leave it at hotel/hostel etc. and hope for the best) Security of data (don't want someone stealing RDP access to my home PC) Security of FTP (don't want someone stealing FTP passwords over wireless)

  Read the article

• Visual Studio + Database Edition + CDC = Deploy Fail

  - by Ben

  Hi All, I've got a database using change data capture (CDC) that is created from a Visual Studio database project (GDR2). My problem is that I have a stored procedure that is analyzing the CDC information and then returning data. How is that a problem you ask? Well, the order of operation is as follows. Pre-deployment Script Tables Indexes, keys, etc. Procedures Post-deployment Script Inside the post-deployment script is where I enable CDC. Here-in lies the problem. The procedure that is acting on the CDC tables is bombing because they don't exist yet! I've tried to put the call to sys.sp_cdc_enable_table in the script that creates the table, but it doesn't like that. Error 102 TSD03070: This statement is not recognized in this context. C:...\Schema Objects\Schemas\dbo\Tables\Foo.table.sql 20 1 Foo Is there a better/built-in way to enable CDC such that it's references are available when the stored procedures are created? Is there a way to run a script after tables are created but before other objects are created? How about a way to create the procedure dependencies be damned? Or maybe I'm just doing things that shouldn't be done?!?! Now, I have a work around. Comment out the sproc body Deploy (CDC is created) Uncomment sproc Deploy Everything is great until the next time I update a CDC tracked table. Then I need to comment out the 'offending' procedure. Thanks for reading my question and thanks for your help!

  Read the article

• How can I get Visual Studio 2010 to show Chinese comments properly

  - by Joe H

  I have some code from a Chinese business partner, but all of the comments in the code which are in Chinese. However, Visual Studio displays them as gibberish. How can I get them to display properly. Here is a code example with some comments converted to gibberish: //Á¬½Óµ½·þÎñÆ÷ void CTestAPIDlg::OnBnClickedButton2() { UpdateData(TRUE); //ÉèÖÃÊÇ·ñ¼Ç¼ÈÕÖ¾ m_ObjRSI->EnableLog(m_bIsOnLogReg,m_bIsOnLogComm); //ÅжÏÊÇ·ñÆôÓôúÀí if (m_bIsOnProxy) { //´úÀí²ÎÊý char proxyIP[64]; char proxyUserName[64]; char proxyUserPwd[64]; ZeroMemory(proxyIP,sizeof(proxyIP)); ZeroMemory(proxyUserName,sizeof(proxyUserName)); ZeroMemory(proxyUserPwd,sizeof(proxyUserPwd)); //×¢£º´Ë´¦ÒòΪÊÇʹÓÃunicode±àÒ룬ËùÒÔÒª×Ö·ûת»»£¬ÏÂͬ. WideCharToMultiByte(CP_ACP,0,m_strProxyIP,-1,proxyIP,64,NULL,NULL); WideCharToMultiByte(CP_ACP,0,m_strProxyUserName,-1,proxyUserName,64,NULL,NULL); WideCharToMultiByte(CP_ACP,0,m_strProxyPwd,-1,proxyUserPwd,64,NULL,NULL); //ÉèÖôúÀí²ÎÊý m_ObjRSI->SetProxyParam(proxyIP,m_iProxyPort,proxyUserName,proxyUserPwd,m_iProxyType); } //Á¬½Ó²ÎÊý char szIp[64]; ZeroMemory(szIp,sizeof(szIp)); WideCharToMultiByte(CP_ACP,0,m_strIP,-1,szIp,64,NULL,NULL); //Á¬½Ó·þÎñÆ÷ m_ObjRSI->SetCommParam(szIp,m_iPort,m_iCheckIDPort); m_ObjRSI->StartService(); //ÉèÖð´Å¥×´Ì¬ ((CButton*)GetDlgItem(IDC_CHECK2))->EnableWindow(FALSE); ((CButton*)GetDlgItem(IDC_CHECK3))->EnableWindow(FALSE); } Thanks in advance for any help...

  Read the article

• Hello world/Console Project in Visual Studio 2008 64 bit

  - by grobartn

  So I am trying to run console 64 bit Hello World program. I have Windows 7 Enterprise x64 bit version. I have installed Visual Studio 2008 and have added all of components needed for 64 bit. I want to create simple console application. It turns out to be a problem. I have simple standard hello world project. I have created it using New Project - Empty project. I added main.cpp that contains this: #include <iostream> using namespace std; int main() { cout << "howdy\n"; } I added new configuration to the project by clicking on Config Manager and added x64 config. Compiled and it compiles. Tried running it and cmd.exe shoots up with following error: "The application has failed to start because its side-by-side configuration is in correct. Please see the application event log or use the command-line sxstrace.e xe tool for more detail. Press any key to continue . . . " Which set-up step if any I am missing. What am I doing wrong and how should I go about setting simple console hello world in 64 bit world. Thanks for any help

  Read the article

• visual studio 2008 (VB)

  - by Ousman

  hello guys, Am writing a programming with visual basic 2008 and i want the programme to be able to read and loop through a text file line by line and showing the event of the loop on a textbox or label until a button is press and the loop will stop on any number that happend to be at the loop event and when a button is press again the loop will continue from where it starts. this is my codes below and having problem with it and any help will be really great. tanks ==========================my codes======================= Imports System.IO '========================================================================================== Public Class Form1 '====================================================================================== 'Dim nFileNum As Integer = FreeFile() ' Get a free file number Dim strFileName As String = "C:\scb.txt" Dim objFilename As FileStream = New FileStream(strFileName, FileMode.Open, FileAccess.Read, FileShare.Read) Dim objFileRead As StreamReader = New StreamReader(objFilename) 'Dim lLineCount As Long 'Dim sNextLine As String '====================================================================================== '======================================================================================== Private Sub btStart_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btStart.Click Try If objFileRead.ReadLine = Nothing Then MsgBox("No Accounts Available to show!", MsgBoxStyle.Information, MsgBoxStyle.DefaultButton2 = MsgBoxStyle.OkOnly) Return Else Do While (objFileRead.Peek() > -1) Loop lblAccounts.Text = objFileRead.ReadLine() 'objFileRead.Close() 'objFilename.Close() End If Catch ex As Exception MessageBox.Show(ex.Message) Finally 'objFileRead.Close() 'objFilename.Close() End Try End Sub Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load End Sub End Class

  Read the article

• Visual Studio C++ Solution in Maven2

  - by graham.reeds

  A new project is coming up that will require interaction between Java and C++. It's been decided that the project will be built via Maven2. Unfortunately I don't know anything about Maven and the Java guys don't know anything about C++. They have their build chain all set up with various reports being emitted for each part related to CheckStyle, Findbugs, Corbortura(?) etc. and they want the same to be done with the C++ side. Currently we have 4 apps that need building: 2 services, a tray app and a simple dialog based application. I've been told I need to have a pom for each and configure each to output to a target directory, have the tool chain produce the reports - the most particular being the code coverage which the client wants 100%. I have sourced the tools - Bullseye and QA-C++ and requested eval copies - but I am dismayed to find there is very little information on C++ & Maven, and what little there is seems to be horror stories. Does anyone on SO have a good story about it (or have link to blog post)? Is there a simple explanation anywhere for configuring a Visual Studio solution (preferably C++) to be Mavenized? I am expecting pain but I am getting increasingly wary of this venture - but unfortunately the project manager is Java side and seems hell-bent on Mavenizing it.

  Read the article

• Can no longer debug ActiveX controls in Visual Studio 2008

  - by Phenglei Kai

  For a long time I would throw up a DebugBreak() or ASSERT(false) in the startup code of my ActiveX control, load up IE, go to a localhost page hosting my control, wait for the dialog to show up, then debug my application. I could also launch it under the debugger by setting IE as the container. I tried again for the first time in 2 months and now this no longer works. If I use the ASSERT(false) method, when I get the Visual C++ Debug dialog and click "retry", IE simply closes without any debugger activity. When I try launching from VS2008 and hoping the DebugBreak() will kick in after I load the page, VS2008 does break, but it says either the "RPC Server is Unavailable" or the "RPC Client Call failed." I am never allowed to have my application in the debugger and it doesn't show up in the modules list of VS. The stack trace in VS2008 only contains Microsoft DLLs and modules and not a hint of my code. I assume it's something I've picked up through Windows Update that broke this. Has anyone else ever seen this issue and know how to make it go away? As it stands, I'm now completely unable to debug my ActiveX control.

  Read the article

• Visual SourceSafe (VSS): "Access to file (filename) denied" error

  - by tk-421

  Hi, can anybody help with the above SourceSafe error? I've spent hours trying to find a fix. I've also Googled the heck out of it but couldn't find a scenario matching mine, because in my case only a few files (not all) are affected. Here's what I found: only a few files in my project generate this error other files in the same directory (for example, App_Code has one of the problem files) work fine I've tried checking out from both the VSS client and Visual Studio another developer can check out the main problem file without any problems This sounds like a permission issue for my user, right? However: I found the location of one of the problem files in VSS's data directory (using VSS's naming format, as in 'fddaaaaa.a') and checked its permissions; everything looks fine and its permissions match those of other files I can check out successfully I can see no differences in the file properties between working and non-working files What else can I check? Has anyone encountered this problem before and found a solution? Thanks. P.S.: SourceGear, svn or git are not options, unfortunately. P.P.S.: Tried unsuccessfully to add tag "sourcesafe." EDIT: Hey Paddy, I tried to click 'add comment' to respond to your comment, but I'm getting a javascript error when loading this page in IE8 ("jquery undefined," etc.) so this isn't working. This is when checking out files, and yes, I've obliterated my local copy more times than I can remember. ;) EDIT 2: Thanks for the responses, guys (again I can't 'add comment' due to jQuery not loading, maybe blocked as discussed in Meta). If the problem was caused by antivirus or a bad disk, would other users still be able to check out the file(s)? That's the case here, which makes me think it's a permission issue specific to my account. However I've looked at the permissions and they match both other users' settings and settings on other files which I can check out.

  Read the article

• Can the Visual Studio (2010) Command Window handle "external tools" with project/solution relative p

  - by ee

  I have been playing with the Command Window in Visual Studio (View-Other Windows-Command Window). It is great for several mouse-free scenarios. (The autocompleting file "Open" command rocks in a non-trivial solution.) That success got me thinking and experimenting: Possibility 1.1: You can use the Alias commands to create custom commands Possibility 1.2: You can use the Shell command to run arbitrary executables and specify parameters (and pipe the result to the output or command windows) Possibility 2: A previously setup external tool definition (with project-relative path variables) could be run from the command window What I am stuck on is: There doesn't appear to be a way to send parameters to an aliased command (and thus the underlying Shell call) There doesn't appear to be a way to use project/solution relative paths ($SolutionDir/$ProjectDir) on a Shell call Using absolute paths in Shell works, but is fragile and high-maintenance (one alias for each needed use case). Typically you want the command to run against a file relative to your project/solution. It seems you can't run the traditional external tools (Tools-External Tools...) in the command window Ultimately I want the external tool functionality in the command window in some way. Can anyone see a way to do this? Or am I barking up the wrong tree? So my questions: Can an "external tool" of some sort (using relative project/solution path parameters) be used in the Command Window? If yes, How? If no, what might be a suitable alternative?

  Read the article

• Resources for setting up a Visual Studio/C++ development environment

  - by Tom H.

  I haven't done much "front-end" development in about 15 years since moving to database development. I'm planning to start work on a personal project using C++ and since I already have MSDN I'll probably end up doing it in Visual Studio 2010. I'm thinking about using Subversion as a version control system eventually. Of course, I'd like to get up and running as quickly as I can, but I'd also like to avoid any pitfalls from a poorly organized project environment. So, my question is, are there any good resources with common best practices for setting up a development environment? I'm thinking along the lines of where to break down a solution into multiple projects if necessary, how to set up a unit testing process, organizing resources, directories, etc. Are there any great add-ons that I should make sure I have set up from the start? Most tutorials just have one simple project, type in your code and click on build to see that your new application says, "Hello World!". This will be a Windows application with several DLLs as well (no web development), so there doesn't need to be a deploy to a web server kind of process. Mostly I just want to make sure that I don't miss anything big and then have to extensively refactor because of it. Thanks!

  Read the article

• Visual Studio 2010 is not allowing me to debug my code

  - by Tejs

  So, this interesting issue has been plaguing me for the past couple of hours. Visual Studio 2010 Ultimate no longer attaches the debugger and lets me debug my code. If I use the built in development server, then everything works fine. If I switch to Use Local IIS Web Server (http://localhost/), then all it does it attach to w3wp.exe, but no DLLs or PDBs are loaded for anything. I can go to Debug Windows Modules, and literally nothing is loaded in this window. Conversely, when using the built in development server, the Modules window displays all the DLLs and shows that the symbols for my DLLs have been loaded. Something is obviously amiss. The VS installation is completely bone stock. In IIS, my website is configured with ASP.NET 2.0 (because no 3.5 exists to select from the drop down), along with read / log visits / index this resource options checked on the "Home Directory" tab. Some of my failed ideas: 1) If I attach to process on the iexplore.exe instance where the website is displayed, it loads Internet Explorer's DLLs, but not mine. 2) I've restarted the computer multiple times 3) I've invoked devenv.exe /resetuserdata once 4) I've confirmed that every project is indeed set to debug and not release. 5) Deleted all \bin contents and rebuilt the solution. 6) Deleted entire solution and repulled from Source Control. Can someone tell me what is wrong with this thing? I'm going to have an aneurism from the headache this is causing me.

  Read the article

• Visual Studio 2008 having problems with namespaces when used as type in Generic coolection

  - by patrick

  I just upgraded last week from Visual Studio 2005 to 2008. I am having an issue with compiler resolving namespaces when I use a class as a type in a Generic collection. Intellisense recognizes the class and the compiler generates no errors when I use the class except when it is a type in a Generic collection declaration either as return type for a Property or as a parameter to a method. This is happening in my only project that is targeting the 3.5 framework, but changing the project containing the class to use the 3.5 framework doesn't fix the problem. Examples Compile fine MyClass myClass = new MyClass(); SortedList <DateTime,MyClass> listOfClasses = new SortedList<DateTime,MyClass> Compile error - Namespace could not be found public SortedList<DateTime,MyClass> ClassList { get; set; } private void DoSomethingToLists(SortedList<DateTime,MyClass> classList) Intellisense has no problem resolving the namespace, only the compiler. Is this a known bug or am I missing something obvious? Will SP1 fix it? I was able to create a new library containing just this class targeting 3.5 and am now able to successfully use this in both 3.5 and 2.0 projects. My guess is that even though I tried to change the target of my original library, since it was still referencing 2.0 projects there was some conflict.

  Read the article

• Visutal Studio Warning "Content is not allowed" in ASP.NET project

  - by pstar

  Hi, I am just started working as a programmer last month, so there will be plenty of newbie question come from me, stay tuned... I am now working on modify the provided template (from DevExpress) to create new web form using ASP.NET 2.0 on Visual Studio 2008. While the functionality of that web form is there, I am in the process of get rid of ninety something warning message, most of them come from the provided template. One of them puzzled me for a while is this one: "Warning 75 Content is not allowed between the opening and closing tags for element 'ClientSideEvents'." And here is the code: <dxe:ASPxListBox id="edtMultiResource" runat="server" width="100%" SelectionMode="CheckColumn" DataSource='<%# ResourceDataSource %>' Border-BorderWidth="0"> <ClientSideEvents SelectedIndexChanged="function(s, e) { var resourceNames = new Array(); var items = s.GetSelectedItems(); var count = items.length; if (count > 0) { for(var i=0; i<count; i++) _aspxArrayPush(resourceNames, items[i].text); } else _aspxArrayPush(resourceNames, ddResource.cp_Caption_ResourceNone); ddResource.SetValue(resourceNames.join(', ')); }"></ClientSideEvents> </dxe:ASPxListBox> I couldn't see anything wrong with the code myself, so please help me out here.

  Read the article

• Visual C++ function suddenly 170 ms slower (4x longer)

  - by Mikael

  For the past few months I've been working on a Visual C++ project to take images from cameras and process them. Up until today this has taken about 65 ms to update the data but now it has suddenly increased significantly. What happens is: I launch my program and for the first 30 or so iterations it performs as expected, then suddenly the loop time increases from 65 ms to 250 ms. The odd thing is, after timing each function I found out that the part of the code which is causing the slowdown is fairly basic and has not been modified in over a month. The data which goes into it is unchanged and identical every iteration but the execution time which is initially less than 1 ms suddenly increases to 170 ms while the rest of the code is still performing as expected (time-wise). Basically, I am calling the same function over and over, for the first 30 calls it performs as it should, after that it slows down for no apparent reason. It might also be worth noting that it is a sudden change in execution time, not a gradual increase. What could be causing this? The code is leaking some memory (~50 kb/s) but not nearly enough to warrant a sudden 4x slowdown. If anyone has any ideas I'd love to hear them!

  Read the article

• Visual C++ function suddenly 170x slower

  - by Mikael

  For the past few months I've been working on a Visual C++ project to take images from cameras and process them. Up until today this has taken about 65 ms to update the data but now it has suddenly increased significantly. What happens is: I launch my program and for the first 30 or so iterations it performs as expected, then suddenly the loop time increases from 65 ms to 250 ms. The odd thing is, after timing each function I found out that the part of the code which is causing the slowdown is fairly basic and has not been modified in over a month. The data which goes into it is unchanged and identical every iteration but the execution time which is initially less than 1 ms suddenly increases to 170 ms while the rest of the code is still performing as expected (time-wise). Basically, I am calling the same function over and over, for the first 30 calls it performs as it should, after that it slows down for no apparent reason. It might also be worth noting that it is a sudden change in execution time, not a gradual increase. What could be causing this? The code is leaking some memory (~50 kb/s) but not nearly enough to warrant a sudden 4x slowdown. If anyone has any ideas I'd love to hear them!

  Read the article

• Using Visual Studio to make non aspx code-behind pages

  - by rizzle

  I want to build my own "code behind" like pages so that i can have HTML in a HTML file and code in cs file but be able to have Intellesense for the tokens in the HTML file. (i know that's what the .NET page class does, but i want to have something much lighter) EG: in the .html file: <%@ Directive classname="HTMLSnippet" %> <html> <body> <div>[%message%] </body> </html> and in a .cs file public class MyClass : HTMLSnippet { public class MyClass () { snippet.message = "message goes here" } } So my question is how do make the HTMLSnippet class so that it's members are automatically created, and specifically show up in Intellesense as i add tokens to the .html file? I know that .net currently does it by creating the designer.cs file and basically builds a class with all the elements from the page as it goes, and that would work fine but how can i get visual studio to generate that before compiling so that it shows up in Intellesense. Thanks! Clarification I'm not using this as a handler yet, i want to use this to have HTML snippets with tokens be usable in code as an object with properties. so almost like a custom control. I think what i have to do is create a VS add-in that waits for me to type tokens into an .html file then it automatically creates a .cs file with members for each token.

  Read the article

• Visual Basic 2010 Language Enhancements

  Earlier this month Microsoft released Visual Studio 2010, the .NET Framework 4.0 (which includes ASP.NET 4.0), and new versions of their core programming languages: C# 4.0 and Visual Basic 10 (also referred to as Visual Basic 2010). Previously, the C# and Visual Basic programming languages were managed by two separate teams within Microsoft, which helps explain why features found in one language was not necessarily found in the other. For example, C# 3.0 introduced <a href="http://weblogs.asp.net/scottgu/archive/2007/03/08/new-c-orcas-language-features-automatic-properties-object-initializers-and-collection-initializers.aspx"><i>collection initializers</i></a>, which enable developers to define the contents of a collection when declaring it; however,

  Read the article

• Visual History for Chrome Maps Out Your Browser History in an Interactive Graph

  - by Jason Fitzpatrick

  Curious how your adventures on the web interweave? Visual History for Chrome maps out related web sites in your browsing history into an interactive chart–visualize your browsing over the last hours, days, or months. One of the interesting elements of Visual History is that it doesn’t simply link sites together via activated hyperlinks but by consecutive use within 20 minute increments–thus if you frequently hit up Gmail, Facebook, and Reddit first thing in the morning, they’ll all appear together in a usage cluster. Site can be organized by URL, sub-domain, or domain. Visual History is free, Chrome only. Visual History for Chrome [Chrome Web Store] HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

  Read the article

• SQL SERVER – Automated Type Conversion using Expressor Studio

  - by pinaldave

  Recently I had an interesting situation during my consultation project. Let me share to you how I solved the problem using Expressor Studio. Consider a situation in which you need to read a field, such as customer_identifier, from a text file and pass that field into a database table. In the source file’s metadata structure, customer_identifier is described as a string; however, in the target database table, customer_identifier is described as an integer. Legitimately, all the source values for customer_identifier are valid numbers, such as “109380”. To implement this in an ETL application, you probably would have hard-coded a type conversion function call, such as: output.customer_identifier=stringToInteger(input.customer_identifier) That wasn’t so bad, was it? For this instance, programming this hard-coded type conversion function call was relatively easy. However, hard-coding, whether type conversion code or other business rule code, almost always means that the application containing hard-coded fields, function calls, and values is: a) specific to an instance of use; b) is difficult to adapt to new situations; and c) doesn’t contain many reusable sub-parts. Therefore, in the long run, applications with hard-coded type conversion function calls don’t scale well. In addition, they increase the overall level of effort and degree of difficulty to write and maintain the ETL applications. To get around the trappings of hard-coding type conversion function calls, developers need an access to smarter typing systems. Expressor Studio product offers this feature exactly, by providing developers with a type conversion automation engine based on type abstraction. The theory behind the engine is quite simple. A user specifies abstract data fields in the engine, and then writes applications against the abstractions (whereas in most ETL software, developers develop applications against the physical model). When a Studio-built application is run, Studio’s engine automatically converts the source type to the abstracted data field’s type and converts the abstracted data field’s type to the target type. The engine can do this because it has a couple of built-in rules for type conversions. So, using the example above, a developer could specify customer_identifier as an abstract data field with a type of integer when using Expressor Studio. Upon reading the string value from the text file, Studio’s type conversion engine automatically converts the source field from the type specified in the source’s metadata structure to the abstract field’s type. At the time of writing the data value to the target database, the engine doesn’t have any work to do because the abstract data type and the target data type are just the same. Had they been different, the engine would have automatically provided the conversion. ?Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Database, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: SSIS

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >