Search Results

Search found 28784 results on 1152 pages for 'start'.

Page 846/1152 | < Previous Page | 842 843 844 845 846 847 848 849 850 851 852 853  | Next Page >

  • Are there new flexible texteditors? [closed]

    - by RParadox
    Vi(m) and Emacs are almost 40 years old. Why are they still the standard, and what attempts have been made at coming up with a new flexible editor? Are there any features which can not be built into vim/emacs? My question is similar to this one: Time to drop Emacs and vi? No one had a suggestion, which surprises me. I would have thought that the core of a texteditor is very small and that people brew their own. Perhaps nobody wants to deal with supporting all the modes? Edit to clarify my question: Instead of writing modes and scripts I ask myself, why there is not a much lightweight project, which lets people custom the editor more directly? Vim has 365395 LOC (C lines all included), Emacs 1.5 million LOC. Why is there a project with say 50k LOC, which is the core, why people can use more freely? Perhaps there is such project, I haven't looked very far. I thought about putting together modules from Vim myself and experimenting with some ideas. The core of editing shouldn't be more than 10k? Vim has a lot optimizations which is really an overkill nowadays. Basically I'm looking for a code base for my own editor and Vi/Emacs are I believe not intended to be used in this way. Bill Joy said the following about vi. http://web.cecs.pdx.edu/~kirkenda/joy84.html The fundamental problem with vi is that it doesn't have a mouse and therefore you've got all these commands. In some sense, its backwards from the kind of thing you'd get from a mouse-oriented thing. I think multiple levels of undo would be wonderful, too. But fundamentally, vi is still ed inside. You can't really fool it. Its like one of those pinatas - things that have candy inside but has layer after layer of paper mache on top. It doesn't really have a unified concept. I think if I were going to go back - I wouldn't go back, but start over again.

    Read the article

  • Event-Driven Debugging

    - by Brian Donahue
    Most application troubleshooting involves getting an error, analyzing the error message, and at worst, attaching a debugger to work out the real cause. What is not really covered is how to troubleshoot an applicaiton that is not errant, but is having a performance issue, and more than likely, in the middle of the night when you are snug in your bed, sawing logs. What you need is an ever-vigilant cyborg who never sleeps to sit in front of your server all night, but as SkyNet is not live yet, you can settle for the next-best thing. Windows provides performance counters and alerts that can tell you when an applicaiton reaches an unacceptable threshold of naughty behavior, but although it can tattle on your brainchild, it won't be the child psychiatrist that you need to tell you why he's pulling your server's pigtails and pulling faces at the teacher. What you need is to plug a debugger into performance monitor and have it tell you what's going on with your applicaiton at the time. For this purpose, I'd used Microsoft's MDbgEngine as the basis for an applicaiton that will dump a program's stacks, I call it Application Slicer Dicer Wonder Dumper Super Cyborg, or StackOMatic for short. StackOMatic can look at a program's behavior and tell you if the stacks are not moving, but it can also work on the command-line to dump all managed methods on the stack at will. Now that there is a command you can use to dump the stacks, all you need to do is politely tell Windows to run it when you're displeased with your creation as it's trashing the CPU of your server at 3 AM. The first step is to create a scheduled task to tell StackOMatic to dump your applicaiton. Start Task Scheduler and right-click Task Scheduler Library and then Create Task. For this exercise I'm creating a task that will dump the Red Gate SQL Monitor Base Monitor Service. In the Actions tab, I enter the path to StackOMatic and use the arguments to log the stack dump to a file: /PN:RedGate.Response.Engine.Alerting.Base.Service /OUT:c:\users\administrator\MonitorLog.txt Next, I go into Windows Server 2008's Reliability and Performance Monitor and add a new Data Collector Set. This set will produce an alert on the %Processor Time for the service. When the processor time breaches 50%, it will run the StackDumpBaseService task I created. Whenever the service misbehaves, it will append to the log file. Now when I go to work in the morning, I can see what the service was doing when it overloaded the processor and take action.

    Read the article

  • Finding "Stuff" In OUM

    - by Dave Burke
    One of the first questions people asked when they start using the Oracle Unified Method (OUM) is “how do I find X ?” Well of course no one is really looking for “X”!! but typically an OUM user might know the Task ID, or part of the Task Name, or maybe they just want to find out if there is any content within OUM that is related to a couple of keys words they have in their mind. Here are three quick tips I give people: 1. Open up one of the OUM Views, then click “Expand All”, and then use your Browser’s search function to locate a key Word. For example, Google Chrome or Internet Explorer: <CTRL> F, then type in a key Word, i.e. Architecture This is fast and easy option to use, but it only searches the current OUM page 2. Use the PDF view of OUM Open up one of the OUM Views, and then click the PDF View button located at the top of the View. Depending on your Browser’s settings, the PDF file will either open up in a new Window, or be saved to your local machine. In either case, once the PDF file is open, you can use the built in PDF search commands to search for key words across a large portion of the OUM Method Pack. This is great option for searching the entire Full Method View of OUM, including linked HTML pages, however the search will not included linked Documents, i.e. Word, Excel. 3. Use your operating systems file index to search for key words This is my favorite option, and one I use virtually every day. I happen to use Windows Search, but you could also use Google Desktop Search, of Finder on a MAC. All you need to do (on a Windows machine) is to make sure your local OUM folder structure is included in the Windows Index. Go to Control Panel, select Indexing Options, and ensure your OUM folder is included in the Index, i.e. C:/METHOD/OM40/OUM_5.6 Once your OUM folders are indexed, just open up Windows Search (or Google Desktop Search) and type in your key worlds, i.e. Unit Testing The reason I use this option the most is because the Search will take place across the entire content of the Indexed folders, included linked files. Happy searching!

    Read the article

  • Integrating with a payment provider; Proper and robust OOP approach

    - by ExternalUse
    History We are currently using a so called redirect model for our online payments (where you send the payer to a payment gateway, where he inputs his payment details - the gateway will then return him to a success/failure callback page). That's easy and straight-forward, but unfortunately quite inconvenient and at times confusing for our customers (leaving the site, changing their credit card details with an additional login on another site etc). Intention & Problem description We are now intending to switch to an integrated approach using an exchange of XML requests and responses. My problem is on how to cater with all (or rather most) of the things that may happen during processing - bearing in mind that normally simplicity is robust whereas complexity is fragile. Examples User abort: The user inputs Credit Card details and hits submit. An XML message to the provider's gateway is sent and waiting for response. The user hits "stop" in his browser or closes the window. ignore_user_abort() in PHP may be an option - but is that reliable? might it be better to redirect the user to a "please wait"-page, that in turn opens an AJAX or other request to the actual processor that does not rely on the connection? Database goes away sounds over-complicated, but with e.g. a webserver in the States and a DB in the UK, it has happened and will happen again: User clicks together his order, payment request has been sent to the provider but the response cannot be stored in the database. What approach could I use, using PHP to sort of start an SQL like "Transaction" that only at the very end gets committed or rolled back, depending on the individual steps? Should then neither commit or roll back have happened, I could sort of "lock" the user to prevent him from paying again or to improperly account for payments - but how? And what else do I need to consider technically? None of the integration examples of e.g. Worldpay, Realex or SagePay offer any insight, and neither Google or my search terms were good enough to find somebody else's thoughts on this. Thank you very much for any insight on how you would approach this!

    Read the article

  • Wi-Fi triangulation using android smartphone

    - by user1887020
    How to make application for wifi triangulation using android platform? This project will be implemented inside the building. No GPS needed. Just using wifi only and doing triangulation to get the current position of the user inside the building. I got minimum 3 access point to implement it. But how to start code in android and integrate triangulation inside android coding? I got the algorithm to do it.. but is there any chance that I can get it done? Because this project is actually want to replace the floor directory board into a smartphone floor directory so that user can find their way to their room for example to the lab. public class Triangulation { public Triangulation() { int dist_1, dist_2, dist_3; //variable for the distances int x1, x2, x3; //coordinates of x int y1, y2, y3; //coordinates of y int final_dist1, final_dist2; //final distance after calc dist_1 = 1; dist_2 = 2; dist_3 = 3; x1 = 5; //test inputs x2 = 2; x3 = 4; y1 = 2; y2 = 2; y3 = 5; final_dist1 = ((dist_1 * dist_1) - (dist_2 * dist_2) – (x1 * x1) + (x2 * x2) - (y1 * y1) + (y2 * y2)) / 2; final_dist2 = ((dist_2 * dist_2) - (dist_3 * dist_3) – (x2 * x2) + (x3 * x3) - (y2 * y2) + (y3 * y3)) / 2; initial_a1 = x1 - x2; initial_a2 = x2 - x3; initial_b1 = y1 - y2; initial_b2 = y2 - y3; //-----------------------STEP 1-------------------------------------- int a1 = initial_a1 / initial_a1; int a2 = initial_a2 / initial_a1; int b1 = initial_b1 / initial_a1; int b2 = initial_b2 / initial_a1; final_dist1 /= initial_a1; final_dist2 /= initial_a1; //-----------------------STEP 2-------------------------------------- a2 = a2 -a2; final_dist2 = -(initial_a2) * final_dist1 + final_dist2; //-----------------------STEP 3-------------------------------------- a2 /= b2; final_dist2 = final_dist2 / b2; b2 /= b2; //-------------------------STEP 4----------------------------------- b1 = b1 - b1; final_dist1 = -(initial_b1) * final_dist2 + final_dist1; } }

    Read the article

  • Are there software options (preferabbly .NET) for doing distance and speed analysis of footballers moving on video?

    - by Anonymous Type
    Editing Question for Clarity Thanks for feedback so far, very insightful. I'm not sure how far along this part of the software community is, and what if any libraries exist for me to leverage from. Heres what I'm trying to do. Problem: Take an existing video of a game of rugby league. The Rugby League field is 100 metres long, 70 metres wide, and has white line markings every 10 metres running along the width of the field, as well as along the sidelines. Each side has 13 players on the field. Players on each team have identical jerseys that normally constrast strongly against background colours (green/brown field colour) and the referee's colour (usually yellow) and the designated water runner (orange). All players have a unique number in thick white lettering on their backs for identification. Video is taken with a high definition camera. Currently only one camera is used (2D) and existing video does not contain a foreground object of fixed spatial dimensions (as suggested in one answer for comparision measurements, however I could add this to future filming sessions if it is worthwhile). The player's do not run in a straight line 50% of the time but will go sideways on on a diagonal to the play the ball. The distance measured always starts from the spot of the previous "tackle", which ends where the player stops forward movement. It is not always possible to determine the players number from the video (facing other direction, sunlight, others standing in the way of the camera). But this isn't important as the software could allow for manual inputting of unknown "runs" at a later point after analysis. Determine the distance between two points (i.e. where the player started his "run" and where he finished it). I'm guessing that this would be quite doable if I manually marked the start and end point in the video. But how would I use landmarks in the background to determine the distance (assuming the person taking the video has kept it from jerking around). Question: Do software packages or libraries exist that are specialised enough to assist with writing analysis software to determine a sports persons distance travelled based on video taken of the performance?

    Read the article

  • ADF Real World Developers Guide Book Review

    - by Grant Ronald
    I'm half way through my review of "Oracle ADF Real World Developer's Guide" by Jobinesh Purushothaman - unfortunately some work deadlines de-railed me from having completed my review by now but here goes.  First thing, Jobinesh works in the Oracle Product Management team with me, so is a colleague. That declaration aside, its clear that this is someone who has done the "real world" side of ADF development and that comes out in the book. In this book he addresses both the newbies and the experience developers alike.  He introduces the ADF building blocks like entity objects and view obejcts, but also goes into some of the nitty gritty details as well.  There is a pro and con to this approach; having only just learned about an entity or view object, you might then be blown away by some of the lower details of coding or lifecycle.  In that respect, you might consider this a book which you could read 3 or 4 times; maybe skipping some elements in the first read but on the next read you have a better grounding to learn the more advanced topics. One of the key issues he addresses is breaking down what happens behind the scenes.  At first, this may not seem important since you trust the framework to do everything for you - but having an understanding of what goes on is essential as you move through development.  For example, page 58 he explains the full lifecycle of what happens when you execute a query.  I think this is a great feature of his book. You see this elsewhere, for example he explains the full lifecycle of what goes on when a page is accessed : which files are involved,the JSF lifecycle etc. He also sprinkes the book with some best practices and advice which go beyond the standard features of ADF and really hits the mark in terms of "real world" advice. So in summary, this is a great ADF book, well written and covering a mass of information.  If you are brand new to ADF its still valid given it does start with the basics.  But you might want to read the book 2 or 3 times, skipping the advanced stuff on the first read.  For those who have some basics already then its going to be an awesome way to cement your knowledge and take it to the next levels.  And for the ADF experts, you are still going to pick up some great ADF nuggets.  Advice: every ADF developer should have one!

    Read the article

  • A Windows Update Prevented Live Discs From Working? [migrated]

    - by user88311
    First off I'll state my system specs. Acer Aspire M1100 Windows Vista Home Basic 32bit OEM 2 Gigs of DDR2 ram 160Gig hard drive 2.7Ghz AMD Athlon 64 processor ATI Radeon X1250 Graphics card A few days ago my computer did automatic updates and updated windows defender to KB915597 (Definition 1.135.415.0), After which when shutting down and starting up I would receive BSOD with the information BUGCODE_USE_DRIVER and 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x877330000) upon where my computer would not start up with any USB devices plugged in and it always require me to run startup repair before it started. Upon when I first started it up and was able to fully boot windows, I had no use of the mouse so I was unable to install the fix that the windows solutions center brought up on my screen, so I restarted again and installed the fix hoping it would cease the problem, it did not. Upoon starting up after installing the fix and restarting I was confronted with the BSOD 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x83291000) at which I found the startup repair could not fix the problem and I restored, as I most like should have in the first place. After going through that I read that simply installing the latest defender version from the microsoft site had fixed this problem for others, so I did that, to find I still received the BSOD's. So in a attempt to find a fix to the problem I went to the microsoft answers site to try to find a way to fix the problem, there I was told to simply disable defender and reboot to see if that fixed the problem, upon doing this my computer would no longer even startup, when I boot normally I get to just when the loading screen finishes and then my computer restarts and when I run startup repair, it runs for about 15 seconds and then my computer restarts as well. I have tried running ubuntu live discs in order to simply access the drive and simply copy and paste the 2 month old physical backup I have of my C drive to the C drive, but whenever I run the live OS when it gets to the end of the load screen and is about to boot, the computer again restarts, yet if I put in a gparted disc, I am able to boot it fully, although it does not give me access to the file system just partition managing and when I attempt to access the internet through it, the computer once again restarts. So my question is, how could the update and what has happened prevent me from running the live OS's properly?

    Read the article

  • PHP or C++? I just want to choose a language and focus on it!

    - by user19177
    I love C++, but I feel I don't know if I should focus on web, so PHP, or C++. It's just an hard choice because right now I want to focus on one language and don't want to switch it a few months later. With C++ I'd program in SDL, while with PHP I don't know yet. I am not a very advanced programmer but I know basics of programming and can get going very well if determined. The problem is I just don't know.. I'm like OK! I'll go for C++! Then a minute later, wait what if I went with C#? Why this that.. ! I've read milion threads about C vs VB C# Python Ruby etc, all of them which I could find! It got me nowhere. The problem is probably I need to know something from some experts I guess.. I'm sure I'm not the only one who feels/felt like I do right now yeah? Uhm... I guess I might help you with some details so your answer may be easier to write! ( And also, if you want to say something else which is not related to PHP or C++, you can do that, I've just got to the conclusion that C++ and PHP are the ones that are worth it but yeah. C# I've discarded due to some stuff I read which says in future the projects I'd start now could just be useless and stuff like that.. ) Ok well : I'm 18 years old, and I program as hobby right now, but I do hope to go to a programming college in future. ( That would be in 2 years ). Hmm, I like programming games, and I'm mostly bothered by the fact "this language could be useless to what I need to do" ( I don't know how to explain this feeling! ) I don't know which other details I could add... I hope you guys can help me choose my path, this is really stressing me I'm wasting my time not doing anything right now because I don't know which language to use..! Thanks!

    Read the article

  • Help understanding my hard drive / partitioning situation... Pictures Included! :)

    - by xopenex
    So I have installed windows 7, and two different distros of linux... I have read and tried to understand things like "spanned" "extended" "primary" "swap" "dev/dev2/" "GRUB" "Windows Boot Loader/Manager" etc.... I have a very very limited understanding of all of it! :) I am trying to figure out how to get all OS boot options on one Boot manager (I'm thinking it will be GRUB), because at this point when i turn on my computer, I basically get two booting options (excluding the memtest options etc)... One options is to boot one of my Linux Distros and the second option is to boot my Windows 7. When i go with the first option, Linux boots up... when i go with the second Windows 7 option, I get the "windows boot manager screen" and I can choose Windows 7 or my other installation of Linux (Ubuntu)... In addition, I did not have swap partition from my first installation of Linux, I created it during the installation of my second distro... This is a lot of info for me, but I'm guessing that you linux Gurus, pretty much understand what is going on! Hope my question makes sense.. i will try and simplify... Can i get all 3 OS's optioned to boot from one GRUB? Can i get both Linux distros to use one swap file (I have seen this possible in other threads, but because of how my disk is partitioned, i dont know if i can do this) I hope that i dont have to start all over installing one after the other. Ive got some pics that may help understand my hard drive situation! Thanks guys! :) EDIT... i had some pics, but im a new member.. so cant post them... :( here is a description of the pics... incase i can email them or post later. [grub][3] First Screen I come to after turning on computer... "Ubuntu with linux 3.2.6" (highlighted) fires up Linux perfectly... other choice at bottom of list "Windows 7 (loader) (on dev/sda1)... brings me to the next picture below.. windows boot manager [win boot mngr][6] both options here load the os selected [Disk Manager Windows][1] picture of my hard drive situation through windows disk manager utility [gparted][2] picture of my hard drive situation through "gparted" [mycomp][4] picture of my hard drive situation through "my computer" [paragon][5] one last pic of my hard drive situation through the eyes of "paragon"

    Read the article

  • How are software projects 'typically' managed/deployed

    - by rguilbault
    My company is evaluating adopting off-the-shelf ALM products to aid in our development lifecycle; we currently use our own homegrown solutions to manage requirements gathering, specification documentation, testing, etc. One of the issues I am having is that we have what we call a pipeline, which consists of particular stops: [Source] - [QC] - [Production] At the first stop, the developer works out a solution to some requested change and performs individual testing. When that process is complete (and peer review has been performed), our ALM system physically moves the affected programs from the [Source] runtime environment to the [QC] runtime environment. You can think of this as analogous to moving some web pages from the 'test' server to the 'live' server, where QC personnel can bang on the system and complain that the developer has it all wrong ;-) Once QC signs off that the changes are working, the system again moves the code along to the next stage, where additional testing is performed, etc. I have been searching the internet for a few days trying to find how the process is accomplished anywhere else -- I have read a bit about builds, automated testing, various ALM products, etc. but nowhere does any of this state how builds interact with initial change requests, what the triggers are, how dependencies are managed, how the various forms of testing are accommodated (e.g. unit testing, integration testing, regression testing), etc. Can anyone point me to any resources or attempt to explain (generically) how a change could/should be tracked and moved though the development lifecycle? I'd be very appreciative. To keep things consistent, let's say that we have a project called Calculator, which we want to add support for the basic trigonometric functions: sine, cosine and tangent. I'm open to reorganizing the company however we need to in order to accomplish due diligence testing and we can suppose that any tools are available for use (if that helps to illustrate the process). To start things off, I think I understand this much: we document the requirements, e.g.: support sine, cosine and tangent functions we create some type of change request/work order to assign to programming coding takes place, commits are made to version control peer review commences programmer marks the work order as completed? ... now what? How does QC do their thing? Would they perform testing before closing the 'work order'?

    Read the article

  • Did I choose proper career path? [closed]

    - by Liston Catch
    I am a C# Junior. My company has it's own enterprise documents-flow system written, my job along with 10 other programmers is to write modules/add-ons for it. I am totally bored of this job, I dont like Microsoft's technologies stack (dont hate me here, just subjective), but it's plain boring, enterprise is boring (subjective again, everyone's tastes differ), days on this work last long and I am tired of it. In short - I dont like my job. In my spare time I am doing PHP-development and I totally like it. I am also doing web-design, so I am LAMP-kind of guy who loves his Ubuntu and does design aswell. I know that most programmers don't do design themselves, so some person is either all about design or all about coding, but I enjoy both and do both. I often get interesting sites orders, I love to make whole websites with all the design, I love the feeling of site completeness, I enjoy talking with customers. I like that PHP is simple and skill cap is lower than one of java, meaning I can become expert in it after some years. But C# (and J2EE also) pay more, and I am doing really good in C#. But I dont like it. I can go for J2EE, platform itself seems more fun to me rather than .NET, but EE development is still boring to me. But it seems higher payed, easier to find job (since PHP is too common for its easiness. But if you are expert in something it doesnt matter, right? Just a higher skillcap.) Question: I want to go on with freelance. I want to have an opportunity to start my own startup in web. Actually I have a browser-game already written by myself, it earns me around 500$ per month which I am really proud of since I am 21 only and still noob in coding. I want to find part-time PHP job. 3 days per week so I can get some stable income, I can work in team and learn from them, social factor matters aswell as ensurance and diversity. I also want my total income (freelance + part-time job + own startup maybe)to be not too much less than one I have working in EE development sector. Maximum of 25% lower, but not more. Is it all possible if I stick with web-development (LAMP + HTML/CSS/JS/Jquery/AJAX)? Or is it easier to reach my goals with EE development?

    Read the article

  • Laptop freezes and seems to crash, but continues working after waiting for a few minutes [closed]

    - by Corwin
    I've had this old notebook laying around and because i was missing a second machine (My wife usually steals the first ;) ) I considered installing Linux. As a php developer I work with Linux servers (usually fedora) on a daily basis and because its an older machine that I want to use for development, linux seemed the best option. Speedwise I expected a good experience, better than Windows 7 on the same machine. The results where terrible. I tried ubuntu 12.04. The shell never got past showing the background. The system doesn't freeze since the mouse still works and I can use ctrl+alt+f2 etc to enter terminal mode. I expected hardware problems en even exchanged the harddisk en Ram memory. No luck though, so I started over and tried 11.10 Same results so I tried 10.04.4 which did install properly. Not sure if unity was the problem, but it seems likely. But then I tried simply things like surfing on the net, the system frooze and I thought it crashed so after a few minutes I pulled the plug and rebooted. But it happened again and I waited. After a few minutes the system came back to life like nothing happened. Long story short. Besides the fact that the entire interface is very sluggish, any and all graphical functions freezes the system. The more elaborate the animation would be, the longer it freezes. I switch chromium from window to fullscreenmode and had to wait 15 minutes to continue. I don't see the animation that's probably supposed to be in between. It just freezes and then after unfreezing its fullscreen. I don't think its a bug. I suspect the problem is with my graphics card. Like I said, its and old system. So old that I can't even find the original Ati drivers anywere. (I'll post the details of my system at the end of my post) I'm at a loss as to what to do next. I tried other Distro's. So far only dreamlinux works normally. Linux Mint won't start as a live CD. I think I simply need a driver update but I can't find them anywhere. Does anyone have the same experience ? Maybe even someone who has or had the same notebook running Ubuntu at some point ? Anyway, here are the specs: http://www.nec-driver.com/nec-driver/NEC-Versa-P550---FP550-Driver_421.html

    Read the article

  • stuck in busybox after update

    - by Lyra500
    I should start out by saying that I am not very tech savvy and have done my best to understand what is going on here from reading other people's posts and have fumbled my way through several attempted fixes without getting anywhere... I run ubuntu 12.04 on an admittedly cheap laptop from ebuyer and in spite of being cheap and not a brand laptop I have never had any major problems with it. Since updating to 12.04 when it was released the boot-up process has always been slow. Logging in takes about 30secs longer than it used to and if I closed my laptop and opened it again instead of being met with a login screen I'd be met with a black screen with a white mouse. As all of these problems had a behavior-changing fix (don't close laptop, patiently wait for login, etc.) I didn't think of reporting any of the issues. Last night when the update manager prompted me that there were updates available I duly did them as I usually do. At the time a bug report came up and I cannot remember what it said but I reported the bug as I was prompted to do. Then this morning when I started up my laptop it went through the usual sequence, GRUB, purple screen with 'ubuntu' etc. and then when it tried to boot up it went into BusyBox and I have not been able to do anything to solve this. I have tried going into the GRUB menu and starting previous versions but I come to the same point - busybox. I have borrowed another rather elderly laptop with Windows Vista to try and download Boot Repair and Ubuntu and burn them onto CD. I tried downloading boot repair five times, to laptop, CD and USB. Every time it would download and burn fine but then the windows laptop would tell me that 1% did not download properly and my laptop would not run the USB or CD upon booting. I then tried to download ubuntu and make a livecd, twice, but again was told that 1% did not download properly and again my laptop will not run ubuntu from the CD upon booting even if/when I went into the f2 menu and changed the menu priority (if that's what you call it) for booting up to make sure it was definitely trying the USB/CD first. This is the message I get from busybox: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands I have tried 'exit' but it mentions things about 'kernal panic' and 'tried to quit init!' and 'can't find /root/dev/console : no such file'. I know that the problem is probably caused by a problem with a kernal caused by the update last night, but I couldn't honestly tell you exactly what was updated and without being able to boot from a livecd I'm not sure how to go about fixing this. As I said, I am not tech savvy and have done what I can to try and find a solution to the problem but I'm starting to feel like I'm out of options. Does anyone have any ideas?

    Read the article

  • IPC in C under linux

    - by poly
    I'm building a messaging solution with the followingsetup: all the messages are saved on a DB, two or more reader processes will read from this DB and send data to other process(es) which will send it over the network. My approach is depicted below, The following have 4 sender process with 4 fifos, and 2 readers with 2 fifos reader0 ? read data from DB reader1 ? read data from DB sending part network_handler0 ? network_handler_fifo0 ? reader0 network_handler1 ? network_handler_fifo1 ? reader1 network_handler2 ? network_handler_fifo2 ? reader0 network_handler3 ? network_handler_fifo3 ? reader1 receiving part network_handler0 ? reader_fifo0 ? reader0 ? write to DB network_handler1 ? reader_fifo1 ? reader1 ? write to DB network_handler2 ? reader_fifo0 ? reader0 ? write to DB network_handler3 ? reader_fifo1 ? reader1 ? write to DB I have few problem with this setup, and please note that the number of processes could be more than that based on the environment, so I could make it 20 readers and 10 network_handlers or it it could as shown above. The size of the buffer is 64K and the message size is 200k, is this small enough to make the write/read to/from fifo atomic? How can make the processes aware of each other, so for example, reader 0 writes to network_handler_fifo0 and network_handler_fifo2, how can I make it start writing on other fifo if the current ones are full or their network_handlers are dea d I thought about making the reader process writing more general in writing, so for example it writes to all network fifos using lock mechanism and stop writing on the one that its process dead, I didn't use it as lock mechanism could slow thing down. BTW, each network_handler is an SCTP association, so network_handler0 is association 0, network_handler1 is association 1 and so on. Any idea is appreciated. I mean even if I have to change the setup above.

    Read the article

  • Introduction to Agile Development

    - by Grant Fritchey
    Even though my current job is a little weird, I still consider myself to be a DBA. I didn’t start that way in IT. I came through support and into development. I loved development. There was a constant struggle to attempt to improve your code, your understanding, and, most importantly, the process of development itself. Development can be slow and tedious. Left alone, developers can simply disappear to build a project and not come back for two years, at which time they deliver it. But, maybe that software isn’t what you wanted, or it’s no longer needed, or who knows what. So developers are constantly attempting to improve their processes in order to deliver more relavent software quicker (something DBAs could learn about). I really admire it. One of the many processes that has come out of that constant striving is known as Agile. As the name implies, Agile development attempts to come up with a quick, fast turning, business aware, well, for want of a word, agile, process that is more responsive to the needs of the business. There are tons and tons of books and blogs and videos on the subject that can get you going. But, Agile isn’t easy (note, Easy is not part of the name). Agile processes can be hard. I’ve worked on multiple agile teams, some successful, some not. The two principal differences between the teams were their discipline and their knowledge of the process. Discipline, that comes from within. But knowledge, ah, well there I can help. Red Gate is bringing a series of free instructional events to the United States in a few weeks time focused primarily on SQL Server (click here right now to register while there’s still space). We’re also offering some .NET instruction too. That’s a full day, free, with top experts in the business. But, the next day, there’s a full day session introducing Agile. You can go to this and learn how to do Agile. Develop that knowledge that will enable you to successfully use the Agile process. Go to this web site to check it out. No, this event is not free, but not everything can be. And it’s not just for developers. DBAs, you need to learn this stuff too. Management could also benefit from understanding these processes (because you guys can help to enforce discipline). It’s really for everyone involved in the development process.

    Read the article

  • Recommended learning path?

    - by stairmast0r
    First, my current standing: I know C++ at an.. advanced beginner level? I've gone through a book, I know the syntax well enough, I know a fair amount of standard library functions, and I've programmed some simple console stuff with it. I'd probably be able to program more with it if I knew how to structure a program, but I just can't seem to wrap my head around the whole concept of structuring something remotely complex. I've messed around with Java for a day or two, and the syntax was extremely easy to get the hang of, except that I didn't really know any functions. I'm plenty willing to learn, and to work hard to do so, but I don't really know where to go from here. Now, at the risk of sounding cliche, what I'd like to become is someone like the great three of id; Carmack, Romero, and Abrash. To be considered a genius. I believe anything can be learned, and nothing mentally limits anyone except lack of desire to learn. But I don't know how to learn this. They learned by doing, and making do with what resources they had. On the other hand, I have access to almost any books I want, access to the internet, and access to a more than capable computer and software. Should I learn more languages? Assembly? LISP? BASIC? Haskell? Should I dive straight into advanced topics like OpenGL? Or should I wait until I feel I've come closer to mastering the simpler things, like console programs, first? Should I follow tutorials? Should I follow books? Should I just dive into writing something and follow a reference manual as I go? What order should I do all this in? How should I do it? I want to completely master this; to be considered a genius. The most perfect career I can imagine is to start the next id. I have the drive to do it, I just don't know where to begin...

    Read the article

  • Basic Android game loop having issues

    - by WillDaBeast509
    I've set up a very basic game loop that should draw a circle, run 100 times, then draw another. I also have a text field that should display how many times the loop has ran. However, the screen seems to not update. It displays a different value for the tick count (different each time the app is ran) and simply stays there. After exiting the app, I get an error saying "Unfortunately, MyApp has stopped." Here is the relevant code: DrawView public class DrawView extends SurfaceView implements SurfaceHolder.Callback { Paint p = new Paint(); MainThread thread; private int y=0; public DrawView(Context c) { super(c); thread = new MainThread(this, getHolder()); thread.running = true; getHolder().addCallback(this); setFocusable(true); } public void draw(Canvas c) { if(c==null) return; //super.onDraw(c); c.drawColor(Color.WHITE); p.setColor(Color.RED); p.setTextSize(32); p.setTypeface(Typeface.SANS_SERIF); c.drawCircle(getWidth()/2-100,getHeight()/2, 50, p); c.drawText("y = " + y, 50, 50, p); if(y>=100) { Log.i("DRAW", "drawing circle"); c.drawCircle(getWidth()/2+100,getHeight()/2, 50, p); } else y++; Log.i("INFO", "y = " + y); } @Override public boolean onTouchEvent(MotionEvent event) { return true; } public void onDraw(Canvas c){} public void surfaceCreated(SurfaceHolder p1) { thread.start(); } public void surfaceChanged(SurfaceHolder p1, int p2, int p3, int p4) { // TODO: Implement this method } public void surfaceDestroyed(SurfaceHolder p1) { thread.running = false; boolean retry = true; while (retry) { try { thread.join(); retry = false; } catch (InterruptedException e) { Log.i("EX", "cathing exception"); } } } } MainThread public class MainThread extends Thread { private DrawView page; private SurfaceHolder holder; public boolean running; public MainThread(DrawView p, SurfaceHolder h) { super(); page = p; holder = h; } @Override public void run() { while(running) { Canvas c = holder.lockCanvas(); page.draw(c); holder.unlockCanvasAndPost(c); } } } Here is an example log outupt: http://pastebin.com/tM9dUPuk It counts the number of ticks correctly and should draw the second circle, but the screen looks like its not updating. After closing the app, the log continues to run and keep outputting "y = 100 drawing circle" until it crashes and shows the error report. What is going on and how can I fix these two problems?

    Read the article

  • Developing a cloud based app

    - by user134897
    I am a company owner that has developed a cloud based app. My code writer has told me how good he is more than once, well, better stated, he did a good job telling me he was better than everyone else in my rather small community. In the last 18 months I have spent nearly 160,000.00 dollars trying to get this company to the "making money" stage. I am now nearly broke, sitting on the edge of a brilliant marketing plan to launch a much needed cloud based app. We did launch our app last year (late 2013), and the feedback was amazing from the users. One user that signed up to use the free app stated that we needed to call him the moment our company goes public because he wants to be the first to buy stock. Now, here's my problem. We did not originally set out to develop a freemium app, we just sort of ended up there by the natural progression of the app. So, now I have an app that really needs to be scrapped and re-built. Although I do feel my code writer has displayed some brilliance in what he has done, he was extremely weak on graphics and every time we speak he tells me there is a newer better way to code that he is trying to learn. So, here's the million dollar question. Ho do I find code writers that already know the newest, best ways to write code? Or maybe better asked, what is the newest best code writing technique? Second, is it even possible to find code writers that are good at graphics? In short, I am nearly broke and need to start over, but I do not know where to find people qualified to write it good the first time around and display good graphic skills. I am trying to build a team of writers instead of just one person. Maybe 3 good at code and two good at graphics, but I am clueless as to what criteria I should use to determine if I am building the right team members. Please help, I am sure you can tell I am fairly lost by my continued rambling.

    Read the article

  • Are we queueing and serializing properly?

    - by insta
    We process messages through a variety of services (one message will touch probably 9 services before it's done, each doing a specific IO-related function). Right now we have a combination of the worst-case (XML data contract serialization) and best-case (in-memory MSMQ) for performance. The nature of the message means that our serialized data ends up about 12-15 kilobytes, and we process about 4 million messages per week. Persistent messages in MSMQ were too slow for us, and as the data grows we are feeling the pressure from MSMQ's memory-mapped files. The server is at 16GB of memory usage and growing, just for queueing. Performance also suffers when the memory usage is high, as the machine starts swapping. We're already doing the MSMQ self-cleanup behavior. I feel like there's a part we're doing wrong here. I tried using RavenDB to persist the messages and just queueing an identifier, but the performance there was very slow (1000 messages per minute, at best). I'm not sure if that's a result of using the development version or what, but we definitely need a higher throughput[1]. The concept worked very well in theory but performance was not up to the task. The usage pattern has one service acting as a router, which does all reads. The other services will attach information based on their 3rd party hook, and forward back to the router. Most objects are touched 9-12 times, although about 10% are forced to loop around in this system for awhile until the 3rd parties respond appropriately. The services right now account for this and have appropriate sleeping behaviors, as we utilize the priority field of the message for this reason. So, my question, is what is an ideal stack for message passing between discrete-but-LAN'ed machines in a C#/Windows environment? I would normally start with BinaryFormatter instead of XML serialization, but that's a rabbit hole if a better way is to offload serialization to a document store. Hence, my question. [1]: The nature of our business means the sooner we process messages, the more money we make. We've empirically proven that processing a message later in the week means we are less likely to make that money. While performance of "1000 per minute" sounds plenty fast, we really need that number upwards of 10k/minute. Just because I'm giving numbers in messages per week doesn't mean we have a whole week to process those messages.

    Read the article

  • Help yourself . if you like

    - by rachelp
    At Red Gate we enjoy talking to our customers. Really! If you've read recent blog posts by members of some of our customer-facing teams, you'll have spotted the pleasure they take in their work. In case you missed those posts, here they are: From our Finance team: Finance: Friends, not foes! From our reception desk: The Front line of Communication However, we recognise that sometimes our customers would like to be able to solve their problems or answer their questions without talking to us - they're in a hurry, it's outside office hours . or perhaps they just prefer not to pick up the phone and call.   Self-service customer care So we've begun a programme of work to enable more self-service; whether it's finding the answer to a "how do i.?" question or getting access to a record of what product licenses they own, we want to make it much easier for our customers to get hold of this information for themselves. If they want to.   Phase 1: make it easier to find information We decided to start by tackling findability. We've got loads of useful information on our website, but it's sometimes difficult to find, so we've been working on improving our site search. Step 1 has been to replace the search engine, clean up the search UI, and make it consistent across the site. We're nearly there! The idea is that if we improve the site search it will be easier - and much more pleasant - for people to find the information they need. The new search will go live some time in April, and then we'll be gathering feedback, looking at web analytics (more about this in an earlier article), and working out what improvements we still need to make. We'd love to hear what you think, so do give your feedback or drop us a line. Or pick up the phone and call, if you like.   What do you think? While I've got your attention, I'd love to hear what people think about self-service customer care. Do you like to call, email, live chat . or do you prefer to dig around and find out answers yourself? Who's getting it right: what self-service sites do you like? p.s. Watch this space for news of phase 2.

    Read the article

  • JOB OF THE WEEK

    - by Maria Sandu
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} My name is Pascaline and I am the EMEA Solution Response Manager. I currently have a role open for a Benelux Solution Response Representative to jump-start his/her career in my international team of six people from all across Europe. Key for this exciting role is that you are curious to learn, like networking and constantly want to develop yourself. To help you with that, you will get extensive product trainings and workshops on all Oracle product lines and you will receive sales training. Further, you have the opportunity to get certified on Oracle products through online trainings and workshops. Every month you will also benefit from 1-on-1 sales coaching and regular coaching from me to help you grow and develop your career at Oracle! The role will include the follow-up of marketing events and online marketing activities with current Key Accounts in the Benelux. It is truly a pioneering role at Oracle as it is the first time that an employee will engage in business conversations about all lines of businesses and products ranges with Key Accounts. So are you interested to work in between marketing and sales? Do you want to work for a big IT multinational? Do you want to work abroad after you graduate and do you want to develop yourself? Then please visit this link for more information.

    Read the article

  • Running MS Access Programs

    - by fredhappier
    I have an old program developed in MS Access and would like to convert it to Kexi somehow. The program on Windows is launched with Access. Is there any way that Kexi can launch this program? I know my way around Ubuntu and the terminal, but not well versed on databases. Once you make something in Kexi how do you "run" it or "view" what you've made? So far I am able to import the MDB file into Kexi and see all of the database data, but that is as far I have gone. The program was made by a relative years ago for my dad. I myself am an Ubuntu only user for 6+ years now and have no intentions to touch Windows and am looking for a linux solution. My dad is also an Ubuntu user, hence why Im looking for a solution. If Kexi cannot launch and run an MDB file, what else can I try? Anything browser based? Any tips or direction would be extremely helpful. I spoke to my brother who originally made the program. I told him about Kexi and here is what he said. Does any of this make sense? Thanks. This is how I would try to get them to work: Stand alone setup - after import, look for an option where you designate which form object you want to open upon startup. It might be in the tools tab in the picture below. After you save that change, it re-start it and it should work. Front end/back end setup - Do what I suggested for the stand alone setup to the "front-end" MDB file. After you do that, put the other file (table MDB file) where you want it to reside on the network. Now, open back up the "front end" file and look for an option that will allow you to "connect" to those tables in the other file. It looks like it could be in the "External data" tab in the picture below. For this setup, you may need to do these two tasks in the reverse order I just mentioned. Thanks! Fred

    Read the article

  • Is the Observer pattern adequate for this kind of scenario?

    - by Omega
    I'm creating a simple game development framework with Ruby. There is a node system. A node is a game entity, and it has position. It can have children nodes (and one parent node). Children are always drawn relatively to their parent. Nodes have a @position field. Anyone can modify it. When such position is modified, the node must update its children accordingly to properly draw them relatively to it. @position contains a Point instance (a class with x and y properties, plus some other useful methods). I need to know when a node's @position's state changes, so I can tell the node to update its children. This is easy if the programmer does something like this: @node.position = Point.new(300,300) Because it is equivalent to calling this: # Code in the Node class def position=(newValue) @position = newValue update_my_children # <--- I know that the position changed end But, I'm lost when this happens: @node.position.x = 300 The only one that knows that the position changed is the Point instance stored in the @position property of the node. But I need the node to be notified! It was at this point that I considered the Observer pattern. Basically, Point is now observable. When a node's position property is given a new Point instance (through the assignment operator), it will stop observing the previous Point it had (if any), and start observing the new one. When a Point instance gets a state change, all observers (the node owning it) will be notified, so now my node can update its children when the position changes. A problem is when this happens: @someNode.position = @anotherNode.position This means that two nodes are observing the same point. If I change one of the node's position, the other would change as well. To fix this, when a position is assigned, I plan to create a new Point instance, copy the passed argument's x and y, and store my newly created point instead of storing the passed one. Another problem I fear is this: somePoint = @node.position somePoint.x = 500 This would, technically, modify @node's position. I'm not sure if anyone would be expecting that behavior. I'm under the impression that people see Point as some kind of primitive rather than an actual object. Is this approach even reasonable? Reasons I'm feeling skeptical: I've heard that the Observer pattern should be used with, well, many observers. Technically, in this scenario there is only one observer at a time. When assigning a node's position as another's (@someNode.position = @anotherNode.position), where I create a whole new instance rather than storing the passed point, it feels hackish, or even inefficient.

    Read the article

  • Use Glassfish JMS from remote client

    - by James
    Hi, I have glassfish installed on a server with a JMS ConnectionFactory set up jms/MyConnectionFactory with a resource type or javax.jms.ConnectionFactory. I now want to access this from a client application on my local machine for this I have the following: public static void main(String[] args) { try{ Properties env = new Properties(); env.setProperty("java.naming.factory.initial", "com.sun.enterprise.naming.SerialInitContextFactory"); env.setProperty("java.naming.factory.url.pkgs", "com.sun.enterprise.naming"); env.setProperty("java.naming.factory.state", "com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl"); env.setProperty("org.omg.CORBA.ORBInitialHost", "10.97.3.74"); env.setProperty("org.omg.CORBA.ORBInitialPort", "3700"); InitialContext initialContext = new InitialContext(env); ConnectionFactory connectionFactory = null; try { connectionFactory = (ConnectionFactory) initialContext.lookup("jms/MyConnectionFactory"); } catch (Exception e) { System.out.println("JNDI API lookup failed: " + e.toString()); e.printStackTrace(); System.exit(1); } }catch(Exception e){ e.printStackTrace(System.err); } } When I run my client I get the following output: INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate {org.omg.CORBA.ORBInitialPort=3700, java.naming.factory.initial=com.sun.enterprise.naming.SerialInitContextFactory, org.omg.CORBA.ORBInitialHost=10.97.3.74, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl, java.naming.factory.url.pkgs=com.sun.enterprise.naming} 19-Mar-2010 16:09:13 org.hibernate.validator.util.Version <clinit> INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 19-Mar-2010 16:09:13 org.hibernate.validator.engine.resolver.DefaultTraversableResolver detectJPA INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. 19-Mar-2010 16:09:13 com.sun.messaging.jms.ra.ResourceAdapter start INFO: MQJMSRA_RA1101: SJSMQ JMS Resource Adapter starting: REMOTE 19-Mar-2010 16:09:13 com.sun.messaging.jms.ra.ResourceAdapter start INFO: MQJMSRA_RA1101: SJSMQ JMSRA Started:REMOTE 19-Mar-2010 16:09:13 com.sun.enterprise.naming.impl.SerialContext lookup SEVERE: enterprise_naming.serialctx_communication_exception 19-Mar-2010 16:09:13 com.sun.enterprise.naming.impl.SerialContext lookup SEVERE: java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:159) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) at javax.naming.InitialContext.lookup(InitialContext.java:392) at simpleproducerclient.Main.main(Main.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.glassfish.appclient.client.acc.AppClientContainer.launch(AppClientContainer.java:424) at org.glassfish.appclient.client.AppClientFacade.main(AppClientFacade.java:134) Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:1017) at com.sun.enterprise.connectors.ConnectorRuntime.obtainManagedConnectionFactory(ConnectorRuntime.java:375) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:124) ... 11 more Caused by: javax.naming.NamingException: Lookup failed for '__SYSTEM/pools/jms/MyConnectionFactory' in SerialContext targetHost=localhost,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is javax.naming.NameNotFoundException: pools] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:442) at javax.naming.InitialContext.lookup(InitialContext.java:392) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.getConnectorConnectionPool(ConnectorConnectionPoolAdminServiceImpl.java:804) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:932) ... 13 more Caused by: javax.naming.NameNotFoundException: pools at com.sun.enterprise.naming.impl.TransientContext.resolveContext(TransientContext.java:252) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:171) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:172) at com.sun.enterprise.naming.impl.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:58) at com.sun.enterprise.naming.impl.RemoteSerialContextProviderImpl.lookup(RemoteSerialContextProviderImpl.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie.dispatchToMethod(ReflectiveTie.java:146) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:176) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:682) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:216) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1841) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1695) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1078) at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:221) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:797) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:561) JNDI API lookup failed: javax.naming.CommunicationException: Communication exception for SerialContext targetHost=10.97.3.74,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory] at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2558) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:492) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:528) javax.naming.CommunicationException: Communication exception for SerialContext targetHost=10.97.3.74,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:461) at javax.naming.InitialContext.lookup(InitialContext.java:392) at simpleproducerclient.Main.main(Main.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.glassfish.appclient.client.acc.AppClientContainer.launch(AppClientContainer.java:424) at org.glassfish.appclient.client.AppClientFacade.main(AppClientFacade.java:134) Caused by: java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:159) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) ... 8 more Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:1017) at com.sun.enterprise.connectors.ConnectorRuntime.obtainManagedConnectionFactory(ConnectorRuntime.java:375) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:124) ... 11 more Caused by: javax.naming.NamingException: Lookup failed for '__SYSTEM/pools/jms/MyConnectionFactory' in SerialContext targetHost=localhost,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is javax.naming.NameNotFoundException: pools] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:442) at javax.naming.InitialContext.lookup(InitialContext.java:392) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.getConnectorConnectionPool(ConnectorConnectionPoolAdminServiceImpl.java:804) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:932) ... 13 more Caused by: javax.naming.NameNotFoundException: pools at com.sun.enterprise.naming.impl.TransientContext.resolveContext(TransientContext.java:252) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:171) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:172) at com.sun.enterprise.naming.impl.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:58) at com.sun.enterprise.naming.impl.RemoteSerialContextProviderImpl.lookup(RemoteSerialContextProviderImpl.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie.dispatchToMethod(ReflectiveTie.java:146) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:176) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:682) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:216) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1841) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1695) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1078) at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:221) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:797) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:561) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2558) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:492) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:528) I have looked at a number of posts and have tried a number of things with no success. I can run the following commands on my server: ./asadmin list-jndi-entries UserTransaction: com.sun.enterprise.transaction.TransactionNamingProxy$UserTransactionProxy java:global: com.sun.enterprise.naming.impl.TransientContext jdbc: com.sun.enterprise.naming.impl.TransientContext ejb: com.sun.enterprise.naming.impl.TransientContext com.sun.enterprise.container.common.spi.util.InjectionManager: com.sun.enterprise.container.common.impl.util.InjectionManagerImpl jms: com.sun.enterprise.naming.impl.TransientContext Command list-jndi-entries executed successfully. ./asadmin list-jndi-entries --context jms MyTopic: org.glassfish.javaee.services.ResourceProxy MyConnectionFactory: org.glassfish.javaee.services.ResourceProxy MyQueue: org.glassfish.javaee.services.ResourceProxy Command list-jndi-entries executed successfully. Any help is greatly appreciated. Cheers, James

    Read the article

< Previous Page | 842 843 844 845 846 847 848 849 850 851 852 853  | Next Page >