Search Results

Search found 2166 results on 87 pages for 'aj hdd'.

Page 85/87 | < Previous Page | 81 82 83 84 85 86 87  | Next Page >

• recommendations for efficient offsite remote backup solution of vm's

  - by senorsmile

  I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

  Read the article

• Well....a ghost lives in my server...

  - by tsgiannis

  Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

  Read the article

• Recover strategy single bad sector in moricon

  - by Damon

  This week, my harddisk made me an early christmas present in the form of a single defect sector. To make up for the puny size of the present, it chose a sector inside moricons.dll for that. This means that now the system takes about 5 minutes to boot before Windows gives up and moves on, and there's 2 dozen scary "critical failure" entries in the system log after every boot, which is annoying. OK, admittedly, I shouldn't complain, it could be worse, the bad sector could be in ntldr... SMART info more or less indicates (for what SMART can indicate anyway) that the drive is mostly OK. Soft Read Error Rate has a score of 96, and Current Pending Sector Count has a raw value of 8, which translates to a score of 100. Acronis DriveMonitor makes this an issue (lowering the overall rating to 75%), HDD Health calls it "excellent", giving an overall rating of 95% (which is what this harddisk from day one). No single score is below 95 (power on hours and spin up count), and most are 100 anyway. Well, whatever, I've seen drives with perfect SMART values fail from one second to the other, and drives with moderate values work for years. So, I'm inclined not to put too much weight into that overall. TL;DR Now... to the problem: I don't feel like trashing the disk just yet (that's planned with a new OS install upgrading to Win7 early next year, independently of this issue), but in the mean time, I would still like to have a smoothly running system again. Therefore, I feel tempted to tamper with it, but before I render my system entirely unusable (since I've never done this before), I'd like to verify that my planned procedere is likely to suceed in having a working system again: Copy moricons.dl_ from the Windows install disk, rename it to moricons.zip, and unzip it. This gives an intact 5.1.2600.2180 version (the broken one is 5.1.2600.5512 - but I guess this makes not much of a difference, since it's an icon-only DLL, and an outdated copy should work better than one that can't be read) Run chkdsk /r /f` which will "repair" the file (i.e. delete the file without asking, tell the drive to remap the sector, and toss some unreadable junk into a file with a hexadecimal number) Hopefully Windows still boots after this (is that a reasonable expectation, or do I need to have something like BartPE ready? -- but then again, what's that good for in case chkdsk has nuked the entire file system...) Delete the junk file generated by chkdsk, copy the new DLL to %windir%\system32 Reboot. Pray. Maybe I just shouldn't touch anything, since it still kind of works... if annoying, but it works. Unsure... But, is there anything fundamentally wrong with the planned approach? Is this a sensible approach at all?

  Read the article

• System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

  - by MGOwen

  Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

  Read the article

• PC will POST whenever feels likes it

  - by kyrpas

  I'm really sick of my PC and I'd love to throw it off the 5th floor but unfortunately I don't have this luxury right now. The issues started when I moved to a new house about 2 months ago. I didn't have this problem before. Case: Arctic Cooling Silentium T1 with embedded Fusion 550 Eco 80 PSU. M/B: ASRock A790GMH/128M Gfx: ATI Radeon HD 5770 Here's what's happening almost on a daily basis: I wake up in the morning, switch on the PC and all the fans start spinning. 9/10 the graphics fan stays on 100% and I know it won't post. If I'm lucky, ATI's fan stays on full power for a second, then goes back to normal and I get a normal post but that doesn't happen often. No, instead it's just drives me crazy. When I get no POST I'm trying a lot of different things and what bothers me the most is that they all work. But not always. No... That way I could find out what the hell is going on and we don't want that.. right? So, sometimes it manages to POST if I: remove the keyboard remove the power cable for a few minutes remove the graphics card remove the HDD cables do nothing, just turn it on and off a few times Sometimes it doesn't POST even if I do all of the above. And I end up removing all power cables from the M/B, and connecting all the stuff one by one. Sometimes it works, sometimes it doesn't and I just have to pray and wait. What the hell is that? I'm getting pissed of again just thinking about it. The only solution is to leave it on 24/7 but I don't want to do that. It should be able to turn on and off when I press the power button. I'm not asking much. I'm starting to think there's some weird electricity/power issue but I really don't understand what it is. There's no logical explanation about it. At least I can't find one. Any ideas?

  Read the article

• Choosing parts for a high-spec custom PC - feedback required [closed]

  - by James

  I'm looking to build a high-spec PC costing under ~£800 (bearing in mind I can get the CPU half price). This is my first time doing this so I have plenty of questions! I have been doing lots of research and this is what I have come up with: http://pcpartpicker.com/uk/p/j4lE Usage: I will be using it for Adobe CS6, rendering in 3DS Max, particle simulations in Realflow and for playing games like GTA IV (and V when it comes out), Crysis 1/2, Saints Row The Third, Deus Ex HR, etc. Questions: Can you see any obvious problem areas with the current setup? Will it be sufficient for the above usage? I won't be doing any overclocking initially. Is it worth buying the H60 liquid cooler, or will the fan that comes with the CPU be sufficient? Is water cooling generally quieter? Is the chosen motherboard good for the current components? And is it future-proof? I read that the HDD is often the bottleneck when it comes to gaming. I presume this is true to other high-end applications? If so, is my selection good? I keep changing my mind about the GPU; first the 560, now the 660. Can anyone shed some light on how to choose? I read mixed opinions about matching the GPU to the CPU. Will the 560 or the 660 be sufficient for my required usage? Atm I'm basing my choice on the PassMark benchmarks and how much they cost. The specs on the GeForce website state that the 560 and the 660 both require 450W. Is this a good figure to base the wattage of my PSU on? If so, how do you decide? Do I really need 750W? The latest GTX 690 requires 650W. Is it a good idea to buy a 750W PSU now to future-proof myself?

  Read the article

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• My VPS ubuntu server is very slow

  - by askmike

  I just installed a frech copy of Ubuntu 12.04 on my vps because my old installation was very slow, unfortunately this did not fix the problem. With slow I mean requests for my PHP websites take a long time, very slow (30 sec per request) to slow (3+ sec per request). When it's really bad SSH is also laggish. The websites are: askmike.org (pretty standard Wordpress) mvr.me (own PHP) slow? very slow: Here is a picture of loading a clean install of wordpress slow: here is a picture of loading a small PHP based website the vps The VPS has 256mb ram and an 25GB hdd. Besides serving the 2 small websites it isn't doing anything AFAIK. What have I installed Clean Ubuntu server 12.04 LAMP stack few things like git and nodejs (not using both) ossec (because I thought my server was getting hammered) munin What I already tried / done I installed munin so that I could watch io speed and such. The problem is that I don't know where to look for in the munin report. I checked logs and don't see anything strange (although I don't really know where to look for besides strange / repetitive errors and GET requests). I configured Apache MPM to: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 40 MaxRequestsPerChild 0 </IfModule> (apache is using prefork, the default) Stats I copied the munin report as it appeared at 4:50 last night to a site hosted on a shared webhost. Note that tonight my mysql crashed somewhere after 1:00 (which is a new problem altogether), so therefor the graph for last night might look strange. Can anyone help me get my VPS up to normal speed? EDIT: Thanks for the replies. The VPS is 10 bucks a month and is from directvps.nl (Dutch host and I'm also dutch). I did two speed tests for disk IO: $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 23.1506 s, 46.4 MB/s $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 39.3796 s, 27.3 MB/s Anyway: how can I prove to my VPS host that it is to slow? I can understand a server being busy slowing a website down. But 5-30 sec loadtime for a normal PHP webpage?

  Read the article

• Can't install .NET framework 4.0 on Windows XP professional version 2002 SP3 (OS bug?)

  - by that guy

  .NET framework 4.0 install fails on Windows XP professional version 2002 SP3: I tried to run setup using "run as..." to make sure the admin rights are used ("protect my computer..." tick was deselected of course). I tried everything: installing using online/offline setup, windows update. install goes a little and then "rolls back" and says: Installation did not succeed .NET Framework 4 has not been installed because: Fatal error during installation. for more information about this problem, see the log file. the full log: http://pastebay.net/1433771 Any ideas? EDIT1: I have found this in the log: "BlockIf: You must install the 32-bit Windows Imaging Component (WIC) before you run Setup. Please visit the Microsoft Download Center to install WIC, and then rerun Setup...." So I found it, and launched "wic_x86_enu.exe" - but it said: WIC Setup error Newer version of update is already on the system. I have already installed: .NET framewrok 2.0 SP2 .NET framewrok 3.0 SP2 .NET framewrok 3.5 SP1 but I need 4.0 . EDIT2: another attempt and it's log. (this time better copy of log file): http://pastebin.com/gmGfbM9a (copy to notepad and save as .htm and open with internet browser). I have tried all the solutions I could find - and nothing helped. I have found something weird: when I formatted the hard drive and installed windows xp again - the .NET framework 4.0 installed ok, but when I plugged my 100Mbit internet cable - the operating system kind off "locked itself" and the bug returned - I could no longer install .NET framework 4.0 again. There was no reason for that to happen, for example I have windows server 2003 in local network, but I don't have active directory enabled on it or anything like that - the server just has some folders shared and thats all (all server's "features" are default). I had the second pc with the same problem - with XP on it too. This seems like the bug of Operating System to me. I couldn't find what was causing the problem. After many days I gave up: backuped everything, formatted HDD and installed Windows 7 professional 64bit. .NET framework 4.0 installed with no problem on it.

  Read the article

• How to prevent dual booted OSes from damaging each other?

  - by user1252434

  For better compatibility and performance in games I'm thinking about installing Windows additionally to Linux. I have security concerns about this, though. Note: "Windows" in the remaining text includes not only the OS but also any software running on it. Regardless of whether it comes included or is additionally installed, whether it is started intentionally or unintentionally (virus, malware). Is there an easy way to achieve the following requirements: Windows MUST NOT be able to kill my linux partition or my data disk neither single files (virus infection) nor overwriting the whole disk Windows MUST NOT be able to read data disk (- extra protection against spyware) Linux may or may not have access to the windows partition both Linux and Windows should have full access to the graphics card this rules out desktop VM solutions for gaming I want the manufacturer's windows graphics card driver Regarding Windows to be unable to destroy my linux install: this is not just the usual paranoia, that has happened to me in the past. So I don't accept "no ext4 driver" as an argument. Once bitten, twice shy. And even if destruction targeted at specific (linux) files is nearly impossible, there should be no way to shred the whole partition. I may accept the risk of malware breaking out of a barrier (e.g. VM) around the whole windows box, though. Currently I have a system disk (SSD) and a data disk (HDD), both SATA. I expect I have to add another disk. If i don't: even better. My CPU is a Intel Core i5, with VT-x and VT-d available, though untested. Ideas I've had so far: deactivate or hide other HDs until reboot at low level possible? can the boot loader (grub) do this for me? tiny VM layer: load windows in a VM that provides access to almost all hardware, except the HDs any ready made software solution for this? Preferably free. as I said: the main problem seems to be to provide full access to the graphics card hardware switch to cut power to disks commercial products expensive and lots of warnings against cheap home built solutions preferably all three hard disks with one switch (one push) mobile racks - won't wear of daily swapping be a problem?

  Read the article

• Tips for maximizing Nginx requests/sec?

  - by linkedlinked

  I'm building an analytics package, and project requirements state that I need to support 1 billion hits per day. Yep, "billion". In other words, no less than 12,000 hits per second sustained, and preferably some room to burst. I know I'll need multiple servers for this, but I'm trying to get maximum performance out of each node before "throwing more hardware at it". Right now, I have the hits-tracking portion completed, and well optimized. I pretty much just save the requests straight into Redis (for later processing with Hadoop). The application is Python/Django with a gunicorn for the gateway. My 2GB Ubuntu 10.04 Rackspace server (not a production machine) can serve about 1200 static files per second (benchmarked using Apache AB against a single static asset). To compare, if I swap out the static file link with my tracking link, I still get about 600 requests per second -- I think this means my tracker is well optimized, because it's only a factor of 2 slower than serving static assets. However, when I benchmark with millions of hits, I notice a few things -- No disk usage -- this is expected, because I've turned off all Nginx logs, and my custom code doesn't do anything but save the request details into Redis. Non-constant memory usage -- Presumably due to Redis' memory managing, my memory usage will gradually climb up and then drop back down, but it's never once been my bottleneck. System load hovers around 2-4, the system is still responsive during even my heaviest benchmarks, and I can still manually view http://mysite.com/tracking/pixel with little visible delay while my (other) server performs 600 requests per second. If I run a short test, say 50,000 hits (takes about 2m), I get a steady, reliable 600 requests per second. If I run a longer test (tried up to 3.5m so far), my r/s degrades to about 250. My questions -- a. Does it look like I'm maxing out this server yet? Is 1,200/s static files nginx performance comparable to what others have experienced? b. Are there common nginx tunings for such high-volume applications? I have worker threads set to 64, and gunicorn worker threads set to 8, but tweaking these values doesn't seem to help or harm me much. c. Are there any linux-level settings that could be limiting my incoming connections? d. What could cause my performance to degrade to 250r/s on long-running tests? Again, the memory is not maxing out during these tests, and HDD use is nil. Thanks in advance, all :)

  Read the article

• Cannot Install/Start MySQL Server

  - by Peezy Bro

  Okay, I decided to migrate from MySQL Server 5.5.37 to Percona Server 5.6. I ended up removing MySQL Server by the following: sudo apt-get --purge remove mysql-server mysql-server-5.5 mysql-server-core-5.5 mysql-client mysql-client-core-5.5 mysql-common sudo apt-get autoremove sudo apt-get autoclean rm -rf /var/lib/mysql rm -rf /etc/mysql Now here is my problem, when I try to install MySQL Server 5.6 it goes through its process and when it asks me for a password, it comes up with Cannot set MySQL "root" password. After it "installs" MySQL wont start up and I get permission denied?. Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 35 not upgraded. brandon@brandon-DB:~$ sudo apt-get install mysql-server Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libdbd-mysql-perl libdbi-perl libmysqlclient18 libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server-5.5 mysql-server-core-5.5 Suggested packages: libmldbm-perl libnet-daemon-perl libplrpc-perl libsql-statement-perl tinyca mailx The following NEW packages will be installed: libdbd-mysql-perl libdbi-perl libmysqlclient18 libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server mysql-server-5.5 mysql-server-core-5.5 0 upgraded, 10 newly installed, 0 to remove and 35 not upgraded. Need to get 0 B/8,955 kB of archives. After this operation, 96.3 MB of additional disk space will be used. Do you want to continue? [Y/n] y Preconfiguring packages ... Selecting previously unselected package mysql-common. (Reading database ... 167760 files and directories currently installed.) Preparing to unpack .../mysql-common_5.5.37-0ubuntu0.14.04.1_all.deb ... Unpacking mysql-common (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package libmysqlclient18:amd64. Preparing to unpack .../libmysqlclient18_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking libmysqlclient18:amd64 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package libdbi-perl. Preparing to unpack .../libdbi-perl_1.630-1_amd64.deb ... Unpacking libdbi-perl (1.630-1) ... Selecting previously unselected package libdbd-mysql-perl. Preparing to unpack .../libdbd-mysql-perl_4.025-1_amd64.deb ... Unpacking libdbd-mysql-perl (4.025-1) ... Selecting previously unselected package libterm-readkey-perl. Preparing to unpack .../libterm-readkey-perl_2.31-1_amd64.deb ... Unpacking libterm-readkey-perl (2.31-1) ... Selecting previously unselected package mysql-client-core-5.5. Preparing to unpack .../mysql-client-core-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-client-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-client-5.5. Preparing to unpack .../mysql-client-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-client-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server-core-5.5. Preparing to unpack .../mysql-server-core-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-server-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Processing triggers for man-db (2.6.7.1-1) ... Setting up mysql-common (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server-5.5. (Reading database ... 168116 files and directories currently installed.) Preparing to unpack .../mysql-server-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-server-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server. Preparing to unpack .../mysql-server_5.5.37-0ubuntu0.14.04.1_all.deb ... Unpacking mysql-server (5.5.37-0ubuntu0.14.04.1) ... Processing triggers for ureadahead (0.100.0-16) ... Processing triggers for man-db (2.6.7.1-1) ... Setting up libmysqlclient18:amd64 (5.5.37-0ubuntu0.14.04.1) ... Setting up libdbi-perl (1.630-1) ... Setting up libdbd-mysql-perl (4.025-1) ... Setting up libterm-readkey-perl (2.31-1) ... Setting up mysql-client-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-client-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-server-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-server-5.5 (5.5.37-0ubuntu0.14.04.1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing package mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing package mysql-server (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.19-0ubuntu6) ... No apport report written because the error message indicates its a followup error from a previous failure. Processing triggers for ureadahead (0.100.0-16) ... Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) I have all my database/tables dumped and on a seperate HDD. This is also a Dev Machine and not my main Production Machine. I also backed up the MySQL_Config and MySQL_Data.

  Read the article

• SQL SERVER – SSMS: Backup and Restore Events Report

  - by Pinal Dave

  A DBA wears multiple hats and in fact does more than what an eye can see. One of the core task of a DBA is to take backups. This looks so trivial that most developers shrug this off as the only activity a DBA might be doing. I have huge respect for DBA’s all around the world because even if they seem cool with all the scripting, automation, maintenance works round the clock to keep the business working almost 365 days 24×7, their worth is knowing that one day when the systems / HDD crashes and you have an important delivery to make. So these backup tasks / maintenance jobs that have been done come handy and are no more trivial as they might seem to be as considered by many. So the important question like: “When was the last backup taken?”, “How much time did the last backup take?”, “What type of backup was taken last?” etc are tricky questions and this report lands answers to the same in a jiffy. So the SSMS report, we are talking can be used to find backups and restore operation done for the selected database. Whenever we perform any backup or restore operation, the information is stored in the msdb database. This report can utilize that information and provide information about the size, time taken and also the file location for those operations. Here is how this report can be launched.   Once we launch this report, we can see 4 major sections shown as listed below. Average Time Taken For Backup Operations Successful Backup Operations Backup Operation Errors Successful Restore Operations Let us look at each section next. Average Time Taken For Backup Operations Information shown in “Average Time Taken For Backup Operations” section is taken from a backupset table in the msdb database. Here is the query and the expanded version of that particular section USE msdb; SELECT (ROW_NUMBER() OVER (ORDER BY t1.TYPE))%2 AS l1 ,       1 AS l2 ,       1 AS l3 ,       t1.TYPE AS [type] ,       (AVG(DATEDIFF(ss,backup_start_date, backup_finish_date)))/60.0 AS AverageBackupDuration FROM backupset t1 INNER JOIN sys.databases t3 ON ( t1.database_name = t3.name) WHERE t3.name = N'AdventureWorks2014' GROUP BY t1.TYPE ORDER BY t1.TYPE On my small database the time taken for differential backup was less than a minute, hence the value of zero is displayed. This is an important piece of backup operation which might help you in planning maintenance windows. Successful Backup Operations Here is the expanded version of this section.   This information is derived from various backup tracking tables from msdb database.  Here is the simplified version of the query which can be used separately as well. SELECT * FROM sys.databases t1 INNER JOIN backupset t3 ON (t3.database_name = t1.name) LEFT OUTER JOIN backupmediaset t5 ON ( t3.media_set_id = t5.media_set_id) LEFT OUTER JOIN backupmediafamily t6 ON ( t6.media_set_id = t5.media_set_id) WHERE (t1.name = N'AdventureWorks2014') ORDER BY backup_start_date DESC,t3.backup_set_id,t6.physical_device_name; The report does some calculations to show the data in a more readable format. For example, the backup size is shown in KB, MB or GB. I have expanded first row by clicking on (+) on “Device type” column. That has shown me the path of the physical backup file. Personally looking at this section, the Backup Size, Device Type and Backup Name are critical and are worth a note. As mentioned in the previous section, this section also has the Duration embedded inside it. Backup Operation Errors This section of the report gets data from default trace. You might wonder how. One of the event which is tracked by default trace is “ErrorLog”. This means that whatever message is written to errorlog gets written to default trace file as well. Interestingly, whenever there is a backup failure, an error message is written to ERRORLOG and hence default trace. This section takes advantage of that and shows the information. We can read below message under this section, which confirms above logic. No backup operations errors occurred for (AdventureWorks2014) database in the recent past or default trace is not enabled. Successful Restore Operations This section may not be very useful in production server (do you perform a restore of database?) but might be useful in the development and log shipping secondary environment, where we might be interested to see restore operations for a particular database. Here is the expanded version of the section. To fill this section of the report, I have restored the same backups which were taken to populate earlier sections. Here is the simplified version of the query used to populate this output. USE msdb; SELECT * FROM restorehistory t1 LEFT OUTER JOIN restorefile t2 ON ( t1.restore_history_id = t2.restore_history_id) LEFT OUTER JOIN backupset t3 ON ( t1.backup_set_id = t3.backup_set_id) WHERE t1.destination_database_name = N'AdventureWorks2014' ORDER BY restore_date DESC,  t1.restore_history_id,t2.destination_phys_name Have you ever looked at the backup strategy of your key databases? Are they in sync and do we have scope for improvements? Then this is the report to analyze after a week or month of maintenance plans running in your database. Do chime in with what are the strategies you are using in your environments. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

  Read the article

• Slow boot on Ubuntu 12.04

  - by Hailwood

  My Ubuntu is booting really slow (Windows is booting faster...). I am using Ubuntu a Dell Inspiron 1545 Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 4GB Ram, 500GB HDD running Ubuntu 12.04 with gnome-shell 3.4.1. After running dmesg the culprit seems to be this section, in particular the last three lines: [26.557659] ADDRCONF(NETDEV_UP): eth0: link is not ready [26.565414] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.355355] Console: switching to colour frame buffer device 170x48 [27.362346] fb0: radeondrmfb frame buffer device [27.362347] drm: registered panic notifier [27.362357] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [27.617435] init: udev-fallback-graphics main process (1049) terminated with status 1 [30.064481] init: plymouth-stop pre-start process (1500) terminated with status 1 [51.708241] CE: hpet increased min_delta_ns to 20113 nsec [59.448029] eth2: no IPv6 routers present But I have no idea how to start debugging this. sudo lshw -C video $ sudo lshw -C video *-display description: VGA compatible controller product: RV710 [Mobility Radeon HD 4300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:48 memory:e0000000-efffffff ioport:de00(size=256) memory:f6df0000-f6dfffff memory:f6d00000-f6d1ffff After loading the propriety driver my new dmesg log is below (starting from the first major time gap): [2.983741] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [25.094327] ADDRCONF(NETDEV_UP): eth0: link is not ready [25.119737] udevd[520]: starting version 175 [25.167086] lp: driver loaded but no devices found [25.215341] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [25.215345] Disabling lock debugging due to kernel taint [25.231924] wmi: Mapper loaded [25.318414] lib80211: common routines for IEEE802.11 drivers [25.318418] lib80211_crypt: registered algorithm 'NULL' [25.331631] [fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [25.332095] [fglrx] vendor: 1002 device: 9552 count: 1 [25.334206] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [25.334229] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [25.334235] pci 0000:01:00.0: setting latency timer to 64 [25.337109] [fglrx] Kernel PAT support is enabled [25.337140] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [25.342803] Adding 4189180k swap on /dev/sda7. Priority:-1 extents:1 across:4189180k [25.364031] type=1400 audit(1338241723.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=606 comm="apparmor_parser" [25.364491] type=1400 audit(1338241723.031:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" [25.364760] type=1400 audit(1338241723.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" [25.394328] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [25.394343] wl 0000:0c:00.0: setting latency timer to 64 [25.415531] acpi device:36: registered as cooling_device2 [25.416688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6 [25.416795] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [25.416865] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [25.425133] lib80211_crypt: registered algorithm 'TKIP' [25.448058] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [25.448321] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [25.448353] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [25.738867] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [25.761213] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [25.761406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [25.783432] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [25.908318] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [25.928155] input: Dell WMI hotkeys as /devices/virtual/input/input9 [25.960561] udevd[543]: renamed network interface eth1 to eth2 [26.285688] init: failsafe main process (835) killed by TERM signal [26.396426] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [26.423108] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [26.511297] Bluetooth: Core ver 2.16 [26.511383] NET: Registered protocol family 31 [26.511385] Bluetooth: HCI device and connection manager initialized [26.511388] Bluetooth: HCI socket layer initialized [26.511391] Bluetooth: L2CAP socket layer initialized [26.512079] Bluetooth: SCO socket layer initialized [26.530164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [26.530168] Bluetooth: BNEP filters: protocol multicast [26.553893] type=1400 audit(1338241724.219:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser" [26.554860] Bluetooth: RFCOMM TTY layer initialized [26.554866] Bluetooth: RFCOMM socket layer initialized [26.554868] Bluetooth: RFCOMM ver 1.11 [26.557910] type=1400 audit(1338241724.223:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser" [26.559166] type=1400 audit(1338241724.223:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser" [26.559574] type=1400 audit(1338241724.223:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser" [26.575519] type=1400 audit(1338241724.239:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=931 comm="apparmor_parser" [26.581100] type=1400 audit(1338241724.247:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=931 comm="apparmor_parser" [26.582794] type=1400 audit(1338241724.247:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser" [26.605672] ppdev: user-space parallel port driver [27.592475] sky2 0000:09:00.0: eth0: enabling interface [27.604329] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.606962] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.852509] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [27.852513] vesafb: scrolling: redraw [27.852515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [27.852523] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [27.852527] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [27.852531] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [27.852534] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [27.852538] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [27.852541] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [27.852544] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [27.852548] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [27.852551] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [27.852554] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [27.852558] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [27.853154] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005580000, using 3072k, total 3072k [27.853405] Console: switching to colour frame buffer device 128x48 [27.853426] fb0: VESA VGA frame buffer device [28.539800] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X [28.540552] [fglrx] Firegl kernel thread PID: 1168 [28.540679] [fglrx] Firegl kernel thread PID: 1169 [28.540789] [fglrx] Firegl kernel thread PID: 1170 [28.540932] [fglrx] IRQ 48 Enabled [29.845620] [fglrx] Gart USWC size:1236 M. [29.845624] [fglrx] Gart cacheable size:489 M. [29.845629] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [29.845632] [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 [29.845635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [59.700023] eth2: no IPv6 routers present

  Read the article

• SPARC T4-4 Delivers World Record Performance on Oracle OLAP Perf Version 2 Benchmark

  - by Brian

  Oracle's SPARC T4-4 server delivered world record performance with subsecond response time on the Oracle OLAP Perf Version 2 benchmark using Oracle Database 11g Release 2 running on Oracle Solaris 11. The SPARC T4-4 server achieved throughput of 430,000 cube-queries/hour with an average response time of 0.85 seconds and the median response time of 0.43 seconds. This was achieved by using only 60% of the available CPU resources leaving plenty of headroom for future growth. The SPARC T4-4 server operated on an Oracle OLAP cube with a 4 billion row fact table of sales data containing 4 dimensions. This represents as many as 90 quintillion aggregate rows (90 followed by 18 zeros). Performance Landscape Oracle OLAP Perf Version 2 Benchmark 4 Billion Fact Table Rows System Queries/hour Users* Response Time (sec) Average Median SPARC T4-4 430,000 7,300 0.85 0.43 * Users - the supported number of users with a given think time of 60 seconds Configuration Summary and Results Hardware Configuration: SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 1 TB memory Data Storage 1 x Sun Fire X4275 (using COMSTAR) 2 x Sun Storage F5100 Flash Array (each with 80 FMODs) Redo Storage 1 x Sun Fire X4275 (using COMSTAR with 8 HDD) Software Configuration: Oracle Solaris 11 11/11 Oracle Database 11g Release 2 (11.2.0.3) with Oracle OLAP option Benchmark Description The Oracle OLAP Perf Version 2 benchmark is a workload designed to demonstrate and stress the Oracle OLAP product's core features of fast query, fast update, and rich calculations on a multi-dimensional model to support enhanced Data Warehousing. The bulk of the benchmark entails running a number of concurrent users, each issuing typical multidimensional queries against an Oracle OLAP cube consisting of a number of years of sales data with fully pre-computed aggregations. The cube has four dimensions: time, product, customer, and channel. Each query user issues approximately 150 different queries. One query chain may ask for total sales in a particular region (e.g South America) for a particular time period (e.g. Q4 of 2010) followed by additional queries which drill down into sales for individual countries (e.g. Chile, Peru, etc.) with further queries drilling down into individual stores, etc. Another query chain may ask for yearly comparisons of total sales for some product category (e.g. major household appliances) and then issue further queries drilling down into particular products (e.g. refrigerators, stoves. etc.), particular regions, particular customers, etc. Results from version 2 of the benchmark are not comparable with version 1. The primary difference is the type of queries along with the query mix. Key Points and Best Practices Since typical BI users are often likely to issue similar queries, with different constants in the where clauses, setting the init.ora prameter "cursor_sharing" to "force" will provide for additional query throughput and a larger number of potential users. Except for this setting, together with making full use of available memory, out of the box performance for the OLAP Perf workload should provide results similar to what is reported here. For a given number of query users with zero think time, the main measured metrics are the average query response time, the median query response time, and the query throughput. A derived metric is the maximum number of users the system can support achieving the measured response time assuming some non-zero think time. The calculation of the maximum number of users follows from the well-known response-time law N = (rt + tt) * tp where rt is the average response time, tt is the think time and tp is the measured throughput. Setting tt to 60 seconds, rt to 0.85 seconds and tp to 119.44 queries/sec (430,000 queries/hour), the above formula shows that the T4-4 server will support 7,300 concurrent users with a think time of 60 seconds and an average response time of 0.85 seconds. For more information see chapter 3 from the book "Quantitative System Performance" cited below. -- See Also Quantitative System Performance Computer System Analysis Using Queueing Network Models Edward D. Lazowska, John Zahorjan, G. Scott Graham, Kenneth C. Sevcik external local Oracle Database 11g – Oracle OLAP oracle.com OTN SPARC T4-4 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 11/2/2012.

  Read the article

• Battery life starts at 2:30 hrs (99%), but less than 1 minute later is only 1:30 hrs (99%)

  - by zondu

  After searching this and other forums, I haven't seen this same issue listed anywhere for Ubuntu 12. Prior to installing Ubuntu 12.10, my Netbook (Acer AspireOne D250, SATA HDD) was consistently getting 2:30-3 hrs battery life under Windows XP Home, SP3. However, immediately after installing Ubuntu 12.10, the battery life starts out at 2:30 hrs (99%), but less than 1 minute later suddenly drops to 1:30 hrs (99%), which seems very odd. It could be a complete coincidence that the battery is suddenly flaky at the exact same moment that Ubuntu 12.10 was installed, but that doesn't seem likely. I'm a newbie to Ubuntu, so I don't have much experience tweaking/trouble-shooting yet. Here's what I've tried so far: enabled laptop mode (sudo su, then echo 5 /proc/sys/vm/laptop_mode) and checked that it is running when the A/C adapter is unplugged, but it doesn't seem to have made any noticeable difference in battery life, installed Jupiter, but it didn't work and messed up the system, so I had to uninstall it, disabled bluetooth (wifi is still on b/c it is necessary), set the screen to lowest brightness, etc., run through at least 1 full power cycle (running until the netbook shut itself off due to critical battery) and have been using it normally (sometimes plugged in, often unplugged until the battery gets very low) for a week since installing Ubuntu 12.10. installed powertop, but have no idea how to interpret its results. Here are the results of acpi -b: w/ A/C adapter: Battery 0: Full, 100% immediately after unplugging: Battery 0: Discharging, 99%, 02:30:20 remaining 1 minute after unplugging: Battery 0: Discharging, 99%, 01:37:49 remaining 2-3 minutes after unplugging: Battery 0: Discharging, 95%, 01:33:01 remaining 10 minutes after unplugging: Battery 0: Discharging, 85%, 01:13:38 remaining Results of cat /sys/class/power_supply/BAT0/uevent: w/ A/C adapter: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Full POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=12136000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1956000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= immediately after unplugging: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11886000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 1 minute later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11728000 POWER_SUPPLY_CURRENT_NOW=1174000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 2-3 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11583000 POWER_SUPPLY_CURRENT_NOW=1209000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1878000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 10 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11230000 POWER_SUPPLY_CURRENT_NOW=1239000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1644000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= Results of upower -i /org/freedesktop/UPower/devices/battery_BAT0: w/ A/C adapter: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:24:58 2012 (823 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 21.1248 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 12.173 V percentage: 100% capacity: 43.4667% technology: lithium-ion immediately after unplugging: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:41:25 2012 (1 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 11.86 V time to empty: 2.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging 1 minute later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:42:31 2012 (17 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.5432 W voltage: 11.753 V time to empty: 1.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging History (rate): 1354023751 13.543 discharging 2-3 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:45:06 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.2824 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.7484 W voltage: 11.545 V time to empty: 1.5 hours percentage: 96.0123% capacity: 43.4667% technology: lithium-ion History (charge): 1354023906 96.012 discharging 1354023844 97.035 discharging History (rate): 1354023906 13.748 discharging 1354023875 12.992 discharging 1354023844 13.284 discharging 10 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:54:24 2012 (28 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 18.1764 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.2948 W voltage: 11.268 V time to empty: 1.4 hours percentage: 86.0429% capacity: 43.4667% technology: lithium-ion History (charge): 1354024433 86.043 discharging History (rate): 1354024464 13.295 discharging 1354024433 13.662 discharging 1354024402 13.781 discharging I noticed that between #2 and #3 (0 and 1 minutes after unplugging), while the battery still reports 99% charge and drops from 2:30 hr to 1:30 hr, the energy usage goes from 8.34 W to 13.54 W and the current_now increases, but shouldn't it be using less energy in battery mode since the screen is much dimmer and it's in power saving mode? (or is that normal behavior?) It also seems to drain more quickly than what it predicts, especially with the 1-1.25 hour drop in the first minute of being unplugged, which seems odd. What really concerns me is that Ubuntu 12.10 may not be properly managing the battery (with the sudden change in charge/life from 2:30 to 1:30 or 1:15 within a minute of unplugging), and that a new battery may quickly die under Ubuntu 12.10. I'd greatly appreciate any advice/suggestions on what to do, and especially whether there's a way to get back the 1-1.5 hrs of battery life that were suddenly lost when changing from WinXp to Ubuntu 12.10. Thanks :)

  Read the article

• WMI/VBS/HTML System Information Script

  - by Methical

  Hey guys; havin' a problem with this code here; can't seem to work out whats goin' wrong with it. All other variables seem to print fine in the HTML ouput; but I get an error that relates to the cputype variable. I get the following error C:\Users\Methical\Desktop\sysinfo.vbs(235,1) Microsoft VBScript runtime error: Invalid procedure call or argument I think it has somethin' to do with this line here fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>CPU</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & cputype & "</i></td></tr>" If i delete this line; the script compiles and outputs with no errors. Here is the full code below Dim strComputer, objWMIService, propValue, objItem Dim strUserName, strPassword, colItems, SWBemlocator ' This section querries for the workstation to be scanned. UserName = "" Password = "" strComputer = "127.1.1.1" ImgDir = "C:\Scripts\images\" 'Sets up the connections and opjects to be used throughout the script. Set SWBemlocator = CreateObject("WbemScripting.SWbemLocator") Set objWMIService = SWBemlocator.ConnectServer(,"root\CIMV2",strUserName,strPassword) 'This determines the current date and time of the PC being scanned. Set colItems = objWMIService.ExecQuery("SELECT * FROM Win32_LocalTime", "WQL", wbemFlagReturnImmediately + wbemFlagForwardOnly) For Each objItem in colItems If objItem.Minute < 10 Then theMinutes = "0" & objItem.Minute Else theMinutes = objItem.Minute End If If objItem.Second < 10 Then theSeconds = "0" & objItem.Second Else theSeconds = objItem.Second End If DateTime = objItem.Month & "/" & objItem.Day & "/" & objItem.Year & " - " & objItem.Hour & ":" & theMinutes & ":" & theSeconds Next 'Gets some ingomation about the Operating System including Service Pack level. Set colItems = objWMIService.ExecQuery("Select * from Win32_OperatingSystem",,48) For Each objItem in colItems WKID = objItem.CSName WKOS = objItem.Caption CSD = objItem.CSDVersion Architecture = objItem.OSArchitecture SysDir = objItem.SystemDirectory SysDrive = objItem.SystemDrive WinDir = objItem.WindowsDirectory ServicePack = objItem.ServicePackMajorVersion & "." & objItem.ServicePackMinorVersion Next 'This section returns the Time Zone Set colItems = objWMIService.ExecQuery("Select * from Win32_TimeZone") For Each objItem in colItems Zone = objItem.Description Next 'This section displays the Shadow Storage information Set colItems = objWMIService.ExecQuery("Select * from Win32_ShadowStorage") For Each objItem in colItems Allocated = int((objItem.AllocatedSpace/1024)/1024+1) UsedSpace = int((objItem.UsedSpace/1024)/1024+1) MaxSpace = int((objItem.MaxSpace/1024)/1024+1) Next 'This section returns the InstallDate of the OS Set objSWbemDateTime = _ CreateObject("WbemScripting.SWbemDateTime") Set colOperatingSystems = _ objWMIService.ExecQuery _ ("Select * from Win32_OperatingSystem") For Each objOperatingSystem _ in colOperatingSystems objSWbemDateTime.Value = _ objOperatingSystem.InstallDate InstallDate = _ objSWbemDateTime.GetVarDate(False) Next 'This section returns the Video card and current resolution. Set colItems = objWMIService.ExecQuery("Select * from Win32_DisplayConfiguration",,48) For Each objItem in colItems VideoCard = objItem.DeviceName Resolution = objItem.PelsWidth & " x " & objItem.PelsHeight & " x " & objItem.BitsPerPel & " bits" Next 'This section returns the Video card memory. Set objWMIService = GetObject("winmgmts:root\cimv2") Set colItems = objWMIService.ExecQuery ("Select * from Win32_VideoController") For Each objItem in colItems VideoMemory = objItem.AdapterRAM/1024/1024 Next 'This returns various system information including current logged on user, domain, memory, manufacture and model. Set colItems = objWMIService.ExecQuery("Select * from Win32_ComputerSystem",,48) For Each objItem in colItems UserName = objItem.UserName Domain = objItem.Domain TotalMemory = int((objItem.TotalPhysicalMemory/1024)/1024+1) Manufacturer = objItem.Manufacturer Model = objItem.Model SysType = objItem.SystemType Next 'This determines the total hard drive space and free hard drive space. Set colItems = objWMIService.ExecQuery("Select * from Win32_LogicalDisk Where Name='C:'",,48) For Each objItem in colItems FreeHDSpace = Fix(((objItem.FreeSpace/1024)/1024)/1024) TotalHDSpace = Fix(((objItem.Size/1024)/1024)/1024) Next 'This section returns the default printer and printer port. Set colItems = objWMIService.ExecQuery("SELECT * FROM Win32_Printer where Default=True", "WQL", wbemFlagReturnImmediately + wbemFlagForwardOnly) For Each objItem in colItems Printer = objItem.Name PortName = objItem.PortName Next 'This returns the CPU information. Set colItems = objWMIService.ExecQuery("SELECT * FROM Win32_Processor", "WQL", wbemFlagReturnImmediately + wbemFlagForwardOnly) For Each objItem in colItems CPUDesc = LTrim(objItem.Name) Next '// CPU Info For each objCPU in GetObject("winmgmts:{impersonationLevel=impersonate}\\" & strComputer & "\root\cimv2").InstancesOf("Win32_Processor") Select Case objCPU.Family Case 2 cputype = "Unknown" Case 11 cputype = "Pentium brand" Case 12 cputype = "Pentium Pro" Case 13 cputype = "Pentium II" Case 14 cputype = "Pentium processor with MMX technology" Case 15 cputype = "Celeron " Case 16 cputype = "Pentium II Xeon" Case 17 cputype = "Pentium III" Case 28 cputype = "AMD Athlon Processor Family" Case 29 cputype = "AMD Duron Processor" Case 30 cputype = "AMD2900 Family" Case 31 cputype = "K6-2+" Case 130 cputype = "Itanium Processor" Case 176 cputype = "Pentium III Xeon" Case 177 cputype = "Pentium III Processor with Intel SpeedStep Technology" Case 178 cputype = "Pentium 4" Case 179 cputype = "Intel Xeon" Case 181 cputype = "Intel Xeon processor MP" Case 182 cputype = "AMD AthlonXP Family" Case 183 cputype = "AMD AthlonMP Family" Case 184 cputype = "Intel Itanium 2" Case 185 cputype = "AMD Opteron? Family" End Select Next 'This returns the current uptime (time since last reboot) of the system. Set colOperatingSystems = objWMIService.ExecQuery ("Select * from Win32_OperatingSystem") For Each objOS in colOperatingSystems dtmBootup = objOS.LastBootUpTime dtmLastBootupTime = WMIDateStringToDate(dtmBootup) dtmSystemUptime = DateDiff("h", dtmLastBootUpTime, Now) Uptime = dtmSystemUptime Next Function WMIDateStringToDate(dtmBootup) WMIDateStringToDate = CDate(Mid(dtmBootup, 5, 2) & "/" & Mid(dtmBootup, 7, 2) & "/" & Left(dtmBootup, 4) & " " & Mid (dtmBootup, 9, 2) & ":" & Mid(dtmBootup, 11, 2) & ":" & Mid(dtmBootup,13, 2)) End Function dim objFSO Set objFSO = CreateObject("Scripting.FileSystemObject") ' -- The heart of the create file script ----------------------- ' -- Creates the file using the value of strFile on Line 11 ' -------------------------------------------------------------- Set fileOutput = objFSO.CreateTextFile( "x.html", true ) 'Set fileOutput = objExplorer.Document 'This is the code for the web page to be displayed. fileOutput.WriteLine "<html>" fileOutput.WriteLine " <head>" fileOutput.WriteLine " <title>System Information for '" & WKID & "' </title>" fileOutput.WriteLine " </head>" fileOutput.WriteLine " <body bgcolor='#FFFFFF' text='#000000' link='#0000FF' vlink='000099' alink='#00FF00'>" fileOutput.WriteLine " <center>" fileOutput.WriteLine " <h1>System Information for " & WKID & "</h1>" fileOutput.WriteLine " <table border='0' cellspacing='1' cellpadding='1' width='95%'>" fileOutput.WriteLine " <tr><td background='" & ImgDir & "blue_spacer.gif'>" fileOutput.WriteLine " <table border='0' cellspacing='0' cellpadding='0' width='100%'>" fileOutput.WriteLine " <tr><td>" fileOutput.WriteLine " <table border='0' cellspacing='0' cellpadding='0' width='100%'>" fileOutput.WriteLine " <tr>" fileOutput.WriteLine " <td width='5%' align='left' valign='middle' background='" & ImgDir & "blue_spacer.gif'><img src='" & ImgDir & "write.gif'></td>" fileOutput.WriteLine " <td width='95%' align='left' valign='middle' background='" & ImgDir & "blue_spacer.gif'> <font color='#FFFFFF' size='5'>WKInfo - </font><font color='#FFFFFF' size='3'>General information on the Workstation.</font></td>" fileOutput.WriteLine " </tr>" fileOutput.WriteLine " <tr><td colspan='2' bgcolor='#FFFFFF'>" fileOutput.WriteLine " <TABLE width='100%' cellspacing='0' cellpadding='2' border='1' bordercolor='#c0c0c0' bordercolordark='#ffffff' bordercolorlight='#c0c0c0'>" fileOutput.WriteLine" <tr height=2><td height=10 align=center bgcolor=midnightblue colspan=3></td></tr>" fileOutput.WriteLine " <TR><TD align='center' bgcolor='#d0d0d0' colspan='2'><b><h3>Date and Time</h3></b></TD></TR>" fileOutput.WriteLine" <tr height=2><td height=10 align=center bgcolor=midnightblue colspan=3></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Date/Time</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & DateTime & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>System Uptime</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & Uptime & " hours</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Time Zone</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & Zone & " </i></td></tr>" fileOutput.WriteLine" <tr height=2><td height=10 align=center bgcolor=midnightblue colspan=3></td></tr>" fileOutput.WriteLine " <TR><TD align='center' bgcolor='#d0d0d0' colspan='2'><b><h3>General Computer Information</h3></b></TD></TR>" fileOutput.WriteLine" <tr height=2><td height=10 align=center bgcolor=midnightblue colspan=3></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Manufacturer</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & Manufacturer & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Model</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & Model & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>System Based</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & SysType & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Operating System</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & WKOS & " " & CSD & " " & Architecture & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Operating System Install Date</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & InstallDate & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>UserName</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & UserName & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Workstation Name</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & WKID & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Domain</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & Domain & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>System Drive</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & SysDrive & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>System Directory</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & SysDir & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Windows Directory</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & WinDir & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>ShadowStorage Allocated Space</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & Allocated & " MB</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>ShadowStorage Used Space</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & UsedSpace & " MB</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>ShadowStorage Max Space</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & MaxSpace & " MB</i></td></tr>" fileOutput.WriteLine" <tr height=2><td height=10 align=center bgcolor=midnightblue colspan=3></td></tr>" fileOutput.WriteLine " <TR><TD align='center' bgcolor='#d0d0d0' colspan='2'><b><h3>General Hardware Information</h3></b></TD></TR>" fileOutput.WriteLine" <tr height=2><td height=10 align=center bgcolor=midnightblue colspan=3></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>CPU</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & cputype & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Memory</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & TotalMemory & " MB</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Total HDD Space</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & TotalHDSpace & " GB</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Free HDD Space</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & FreeHDSpace & " GB</i></td></tr>" fileOutput.WriteLine" <tr height=2><td height=10 align=center bgcolor=midnightblue colspan=3></td></tr>" fileOutput.WriteLine " <TR><TD align='center' bgcolor='#d0d0d0' colspan='2'><b><h3>General Video Card Information</h3></b></TD></TR>" fileOutput.WriteLine" <tr height=2><td height=10 align=center bgcolor=midnightblue colspan=3></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Video Card</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & VideoCard & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Resolution</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & Resolution & "</i></td></tr>" fileOutput.WriteLine " <TR><TD width='30%' align='left' bgcolor='#e0e0e0'>Memory</TD><td width='70%' bgcolor=#f0f0f0 align=left><i>" & VideoMemory & " MB</i></td></tr>" 'This section lists all the current services and their status. fileOutput.WriteLine " <TR><TD align='center' bgcolor='#d0d0d0' colspan='2'><b><h3>Current Service Information</h3></b></TD></TR>" fileOutput.WriteLine " <tr><td colspan='2' bgcolor='#f0f0f0'>" fileOutput.WriteLine " <TABLE width='100%' cellspacing='0' cellpadding='2' border='1' bordercolor='#c0c0c0' bordercolordark='#ffffff' bordercolorlight='#c0c0c0'>" fileOutput.WriteLine " <TR><TD width='70%' align='center' bgcolor='#e0e0e0'><b>Service Name</b></td><TD width='30%' align='center' bgcolor='#e0e0e0'><b>Service State</b></td><tr>" Set colRunningServices = objWMIService.ExecQuery("Select * from Win32_Service") For Each objService in colRunningServices fileOutput.WriteLine " <TR><TD align='left' bgcolor='#f0f0f0'>" & objService.DisplayName & "</TD><td bgcolor=#f0f0f0 align=center><i>" & objService.State & "</i></td></tr>" wscript.echo " <TR><TD align='left' bgcolor='#f0f0f0'>" & objService.DisplayName & "</TD><td bgcolor=#f0f0f0 align=center><i>" & objService.State & "</i></td></tr>" Next fileOutput.WriteLine " </table>" fileOutput.WriteLine " </td></tr>" 'This section lists all the current running processes and some information. fileOutput.WriteLine " <TR><TD align='center' bgcolor='#d0d0d0' colspan='2'><b><h3>Current Process Information</h3></b></TD></TR>" fileOutput.WriteLine " <tr><td colspan='2' bgcolor='#f0f0f0'>" fileOutput.WriteLine " <TABLE width='100%' cellspacing='0' cellpadding='2' border='1' bordercolor='#c0c0c0' bordercolordark='#ffffff' bordercolorlight='#c0c0c0'>" fileOutput.WriteLine " <TR><TD width='10%' align='center' bgcolor='#e0e0e0'><b>PID</b></td><TD width='35%' align='center' bgcolor='#e0e0e0'><b>Process Name</b></td><TD width='40%' align='center' bgcolor='#e0e0e0'><b>Owner</b></td><TD width='15%' align='center' bgcolor='#e0e0e0'><b>Memory</b></td></tr>" Set colProcessList = objWMIService.ExecQuery("Select * from Win32_Process") For Each objProcess in colProcessList colProperties = objProcess.GetOwner(strNameOfUser,strUserDomain) fileOutput.WriteLine " <TR><TD align='center' bgcolor='#f0f0f0'>" & objProcess.Handle & "</td><TD align='center' bgcolor='#f0f0f0'>" & objProcess.Name & "</td><TD align='center' bgcolor='#f0f0f0'>" & strUserDomain & "\" & strNameOfUser & "</td><TD align='center' bgcolor='#f0f0f0'>" & objProcess.WorkingSetSize/1024 & " kb</td><tr>" Next fileOutput.WriteLine " </table>" fileOutput.WriteLine " </td></tr>" 'This section lists all the currently installed software on the machine. fileOutput.WriteLine " <TR><TD align='center' bgcolor='#d0d0d0' colspan='2'><b><i>Installed Software</i></b></TD></TR>" fileOutput.WriteLine " <tr><td colspan='2' bgcolor='#f0f0f0'>" Set colSoftware = objWMIService.ExecQuery ("Select * from Win32_Product") For Each objSoftware in colSoftware fileOutput.WriteLine" <TABLE width='100%' cellspacing='0' cellpadding='2' border='1' bordercolor='#c0c0c0' bordercolordark='#ffffff' bordercolorlight='#c0c0c0'>" fileOutput.WriteLine" <tr><td width=30% align=center bgcolor='#e0e0e0'><b>Name</b></td><td width=30% align=center bgcolor='#e0e0e0'><b>Vendor</b></td><td width=30% align=center bgcolor='#e0e0e0'><b>Version</b></td></tr>" fileOutput.WriteLine" <tr><td align=center bgcolor=#f0f0f0>" & objSoftware.Name & "</td><td align=center bgcolor=#f0f0f0>" & objSoftware.Vendor & "</td><td align=center bgcolor=#f0f0f0>" & objSoftware.Version & "</td></tr>" fileOutput.WriteLine" <tr height=2><td height=10 align=center bgcolor=midnightblue colspan=3></td></tr>" fileOutput.WriteLine" </table>" Next fileOutput.WriteLine " </td></tr>" fileOutput.WriteLine " </table>" fileOutput.WriteLine " </td></tr>" fileOutput.WriteLine " </table>" fileOutput.WriteLine " </td></tr>" fileOutput.WriteLine " </table>" fileOutput.WriteLine " </td></tr>" fileOutput.WriteLine " </table>" fileOutput.WriteLine " <p><small></small></p>" fileOutput.WriteLine " </center>" fileOutput.WriteLine " </body>" fileOutput.WriteLine "<html>" fileOutput.close WScript.Quit

  Read the article

• Can MySQL reasonably perform queries on billions of rows?

  - by haxney

  I am planning on storing scans from a mass spectrometer in a MySQL database and would like to know whether storing and analyzing this amount of data is remotely feasible. I know performance varies wildly depending on the environment, but I'm looking for the rough order of magnitude: will queries take 5 days or 5 milliseconds? Input format Each input file contains a single run of the spectrometer; each run is comprised of a set of scans, and each scan has an ordered array of datapoints. There is a bit of metadata, but the majority of the file is comprised of arrays 32- or 64-bit ints or floats. Host system |----------------+-------------------------------| | OS | Windows 2008 64-bit | | MySQL version | 5.5.24 (x86_64) | | CPU | 2x Xeon E5420 (8 cores total) | | RAM | 8GB | | SSD filesystem | 500 GiB | | HDD RAID | 12 TiB | |----------------+-------------------------------| There are some other services running on the server using negligible processor time. File statistics |------------------+--------------| | number of files | ~16,000 | | total size | 1.3 TiB | | min size | 0 bytes | | max size | 12 GiB | | mean | 800 MiB | | median | 500 MiB | | total datapoints | ~200 billion | |------------------+--------------| The total number of datapoints is a very rough estimate. Proposed schema I'm planning on doing things "right" (i.e. normalizing the data like crazy) and so would have a runs table, a spectra table with a foreign key to runs, and a datapoints table with a foreign key to spectra. The 200 Billion datapoint question I am going to be analyzing across multiple spectra and possibly even multiple runs, resulting in queries which could touch millions of rows. Assuming I index everything properly (which is a topic for another question) and am not trying to shuffle hundreds of MiB across the network, is it remotely plausible for MySQL to handle this? UPDATE: additional info The scan data will be coming from files in the XML-based mzML format. The meat of this format is in the <binaryDataArrayList> elements where the data is stored. Each scan produces = 2 <binaryDataArray> elements which, taken together, form a 2-dimensional (or more) array of the form [[123.456, 234.567, ...], ...]. These data are write-once, so update performance and transaction safety are not concerns. My naïve plan for a database schema is: runs table | column name | type | |-------------+-------------| | id | PRIMARY KEY | | start_time | TIMESTAMP | | name | VARCHAR | |-------------+-------------| spectra table | column name | type | |----------------+-------------| | id | PRIMARY KEY | | name | VARCHAR | | index | INT | | spectrum_type | INT | | representation | INT | | run_id | FOREIGN KEY | |----------------+-------------| datapoints table | column name | type | |-------------+-------------| | id | PRIMARY KEY | | spectrum_id | FOREIGN KEY | | mz | DOUBLE | | num_counts | DOUBLE | | index | INT | |-------------+-------------| Is this reasonable?

  Read the article

• Ubuntu: Move fsbackup backups to Amazon S3

  - by Alexander Gladysh

  I have a legacy server (Ubuntu 9.10 Karmic x86), where previous admin set up backups with fsbackup. This server lives in a VPS (under some kind of Xen), and it is low on HDD space (16 GB total). Now it came to a point, where fsbackup backups take more space than the rest of data in the system. The filesystem is 100% filled, and I already cleaned up all that I could, aside from actual backups. I do not have any experience managing fsbackup, and I do not want to break or lose the backups. Googling fsbackup gives surprisingly low quality results... Here is how my backups look like: $ sudo ls -lh /var/archives total 8.1G -rw-rw---- 1 root root 318 2011-01-06 06:26 myserver-20110106.md5 -rw-rw---- 1 root root 258 2011-01-07 06:26 myserver-20110107.md5 -rw-rw---- 1 root root 318 2011-01-08 06:26 myserver-20110108.md5 -rw-rw---- 1 root root 318 2011-01-09 06:26 myserver-20110109.md5 -rw-rw---- 1 root root 346 2011-01-10 06:43 myserver-20110110.md5 -rw-rw---- 1 root root 14M 2011-01-06 06:26 myserver-all-mysql-databases.20110106.sql.bz2 -rw-rw---- 1 root root 14M 2011-01-07 06:26 myserver-all-mysql-databases.20110107.sql.bz2 -rw-rw---- 1 root root 14M 2011-01-08 06:26 myserver-all-mysql-databases.20110108.sql.bz2 -rw-rw---- 1 root root 14M 2011-01-09 06:26 myserver-all-mysql-databases.20110109.sql.bz2 -rw-rw---- 1 root root 862 2011-01-10 06:43 myserver-all-mysql-databases.20110110.sql.bz2 -rw-rw---- 1 root root 827K 2011-01-03 06:25 myserver-etc.20110103.master.tar.gz -rw-rw---- 1 root root 16K 2011-01-06 06:25 myserver-etc.20110106.tar.gz -rw-rw---- 1 root root 16K 2011-01-07 06:25 myserver-etc.20110107.tar.gz -rw-rw---- 1 root root 16K 2011-01-08 06:25 myserver-etc.20110108.tar.gz -rw-rw---- 1 root root 16K 2011-01-09 06:25 myserver-etc.20110109.tar.gz -rw-rw---- 1 root root 827K 2011-01-10 06:25 myserver-etc.20110110.master.tar.gz -rw------- 1 root root 36K 2011-01-10 06:25 myserver-etc.incremental.bin -rw-rw---- 1 root root 29M 2011-01-03 06:25 myserver-home.20110103.master.tar.gz -rw-rw---- 1 root root 11K 2011-01-06 06:25 myserver-home.20110106.tar.gz -rw-rw---- 1 root root 14K 2011-01-07 06:25 myserver-home.20110107.tar.gz -rw-rw---- 1 root root 11K 2011-01-08 06:25 myserver-home.20110108.tar.gz -rw-rw---- 1 root root 11K 2011-01-09 06:25 myserver-home.20110109.tar.gz -rw-rw---- 1 root root 2.0M 2011-01-10 06:25 myserver-home.20110110.master.tar.gz -rw------- 1 root root 27K 2011-01-10 06:25 myserver-home.incremental.bin -rw-rw---- 1 root root 1.5G 2011-01-03 06:29 myserver-opt.20110103.master.tar.gz -rw-rw---- 1 root root 1.5M 2011-01-06 06:25 myserver-opt.20110106.tar.gz -rw-rw---- 1 root root 1.5M 2011-01-07 06:25 myserver-opt.20110107.tar.gz -rw-rw---- 1 root root 1.5M 2011-01-08 06:25 myserver-opt.20110108.tar.gz -rw-rw---- 1 root root 1.5M 2011-01-09 06:25 myserver-opt.20110109.tar.gz -rw-rw---- 1 root root 1.5G 2011-01-10 06:30 myserver-opt.20110110.master.tar.gz -rw------- 1 root root 201K 2011-01-10 06:30 myserver-opt.incremental.bin -rw-rw---- 1 root root 2.3G 2011-01-03 06:41 myserver-srv.20110103.master.tar.gz -rw-rw---- 1 root root 44M 2011-01-06 06:26 myserver-srv.20110106.tar.gz -rw-rw---- 1 root root 27M 2011-01-07 06:25 myserver-srv.20110107.tar.gz -rw-rw---- 1 root root 39M 2011-01-08 06:26 myserver-srv.20110108.tar.gz -rw-rw---- 1 root root 2.0M 2011-01-09 06:25 myserver-srv.20110109.tar.gz -rw-rw---- 1 root root 2.7G 2011-01-10 06:42 myserver-srv.20110110.master.tar.gz -rw------- 1 root root 3.4M 2011-01-10 06:42 myserver-srv.incremental.bin I'm thinking about moving backups to Amazon S3, but before that I have to free some space, so the server can work. Perhaps I can mount /var/archives to an Amazon S3 bucket somehow... Any advice?

  Read the article

• High Load mysql on Debian server

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ?

  Read the article

• Linux not buffering block I/O when the device is not "in use" (i.e. mounted)

  - by Radek Hladík

  I am installing new server and I've found an interesting issue. The server is running Fedora 19 (3.11.7-200.fc19.x86_64 kernel) and is supposed to host a few KVM/Qemu virtual servers (mail server, file server, etc..). The HW is Intel(R) Xeon(R) CPU 5160 @ 3.00GHz with 16GB RAM. One of the most important features will be Samba server and we have decided to make it as virtual machine with almost direct access to the disks. So the real HDD is cached on SSD (via bcache) then raided with md and the final device is exported into the virtual machine via virtio. The virtual machine is again Fedora 19 with the same kernel. One important topic to find out is whether the virtualization layer will not introduce high overload into disk I/Os. So far I've been able to get up to 180MB/s in VM and up to 220MB/s on real HW (on the SSD disk). I am still not sure why the overhead is so big but it is more than the network can handle so I do not care so much. The interesting thing is that I've found that the disk reads are not buffered in the VM unless I create and mount FS on the disk or I use the disks somehow. Simply put: Lets do dd to read disk for the first time (the /dev/vdd is an old Raptor disk 70MB/s is its real speed): [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 36.8038 s, 71.2 MB/s Buffers: 14444 kB Rereading the data shows that they are cached somewhere but not in buffers of the VM. Also the speed increased to "only" 500MB/s. The VM has 4GB of RAM (more that the test file) [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.16016 s, 508 MB/s Buffers: 14444 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.05727 s, 518 MB/s Buffers: 14444 kB Now lets mount the FS on /dev/vdd and try the dd again: [root@localhost ~]# mount /dev/vdd /mnt/tmp [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 4.68578 s, 559 MB/s Buffers: 2574592 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 1.50504 s, 1.7 GB/s Buffers: 2574592 kB While the first read was the same, all 2.6GB got buffered and the next read was at 1.7GB/s. And when I unmount the device: [root@localhost ~]# umount /mnt/tmp [root@localhost ~]# cat /proc/meminfo | grep Buffers Buffers: 14452 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.10499 s, 514 MB/s Buffers: 14468 kB The bcache was disabled while testing and the results are same on faster (newer) HDDs and on SSD (except for the initial read speed of course). To sum it up. When I read from the device via dd first time, it gets read from the disk. Next time I reread it gets cached in the host but not in the guest (thats actually the same issue, more on that later). When I mount the filesystem but try to read the device directly it gets cached in VM (via buffers). As soon as I stop "using" it, buffers are discarded and the device is not cached anymore in the VM. When I looked into buffers value on the host I realized that the situation is the same. The block I/O gets buffered only when the disk is in use, in this case it means "exported to a VM". On host, after all the measurement done: 3165552 buffers On the host, after the VM shutdown: 119176 buffers I know it is not important as the disks will be mounted all the time but I am curious and I would like to know why it is working like this.

  Read the article

• Windows 7: How to place SuperFetch cache on an SSD?

  - by Ian Boyd

  I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

  Read the article

• ls hangs for a certain directory

  - by Jakobud

  There is a particular directory (/var/www), that when I run ls (with or without some options), the command hangs and never completes. There is only about 10-15 files and directories in /var/www. Mostly just text files. Here is some investigative info: [me@server www]$ df . Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_dev-lv_root 50G 19G 29G 40% / [me@server www]$ df -i . Filesystem Inodes IUsed IFree IUse% Mounted on /dev/mapper/vg_dev-lv_root 3.2M 435K 2.8M 14% / find works fine. Also I can type in cd /var/www/ and press TAB before pressing enter and it will successfully tab-completion list of all files/directories in there: [me@server www]$ cd /var/www/ cgi-bin/ create_vhost.sh html/ manual/ phpMyAdmin/ scripts/ usage/ conf/ error/ icons/ mediawiki/ rackspace sqlbuddy/ vhosts/ [me@server www]$ cd /var/www/ I have had to kill my terminal sessions several times because of the ls hanging: [me@server ~]$ ps | grep ls gdm 6215 0.0 0.0 488152 2488 ? S<sl Jan18 0:00 /usr/bin/pulseaudio --start --log-target=syslog root 23269 0.0 0.0 117724 1088 ? D 18:24 0:00 ls -Fh --color=always -l root 23477 0.0 0.0 117724 1088 ? D 18:34 0:00 ls -Fh --color=always -l root 23579 0.0 0.0 115592 820 ? D 18:36 0:00 ls -Fh --color=always root 23634 0.0 0.0 115592 816 ? D 18:38 0:00 ls -Fh --color=always root 23740 0.0 0.0 117724 1088 ? D 18:40 0:00 ls -Fh --color=always -l me 23770 0.0 0.0 103156 816 pts/6 S+ 18:41 0:00 grep ls kill doesn't seem to have any affect on the processes, even as sudo. What else should I do to investigate this problem? It just randomly started happening today. UPDATE dmesg is a big list of things, mostly related to an external USB HDD that I've mounted too many times and the max mount count has been reached, but that is an un-related problem I think. Near the bottom of dmesg I'm seeing this: INFO: task ls:23579 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ls D ffff88041fc230c0 0 23579 23505 0x00000080 ffff8801688a1bb8 0000000000000086 0000000000000000 ffffffff8119d279 ffff880406d0ea20 ffff88007e2c2268 ffff880071fe80c8 00000003ae82967a ffff880407169ad8 ffff8801688a1fd8 0000000000010518 ffff880407169ad8 Call Trace: [<ffffffff8119d279>] ? __find_get_block+0xa9/0x200 [<ffffffff814c97ae>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814c964b>] mutex_lock+0x2b/0x50 [<ffffffff8117a4d3>] do_lookup+0xd3/0x220 [<ffffffff8117b145>] __link_path_walk+0x6f5/0x1040 [<ffffffff8117a47d>] ? do_lookup+0x7d/0x220 [<ffffffff8117bd1a>] path_walk+0x6a/0xe0 [<ffffffff8117beeb>] do_path_lookup+0x5b/0xa0 [<ffffffff8117cb57>] user_path_at+0x57/0xa0 [<ffffffff81178986>] ? generic_readlink+0x76/0xc0 [<ffffffff8117cb62>] ? user_path_at+0x62/0xa0 [<ffffffff81171d3c>] vfs_fstatat+0x3c/0x80 [<ffffffff81258ae5>] ? _atomic_dec_and_lock+0x55/0x80 [<ffffffff81171eab>] vfs_stat+0x1b/0x20 [<ffffffff81171ed4>] sys_newstat+0x24/0x50 [<ffffffff810d40a2>] ? audit_syscall_entry+0x272/0x2a0 [<ffffffff81013172>] system_call_fastpath+0x16/0x1b And also, strace ls /var/www/ spits out a whole BUNCH of information. I don't know what is useful here... The last handful of lines: ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=68, ws_col=145, ws_xpixel=0, ws_ypixel=0}) = 0 stat("/var/www/", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/var/www/", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 3 fcntl(3, F_GETFD) = 0x1 (flags FD_CLOEXEC) getdents(3, /* 16 entries */, 32768) = 488 getdents(3, /* 0 entries */, 32768) = 0 close(3) = 0 fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 9), ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3093b18000 write(1, "cgi-bin conf create_vhost.sh\te"..., 125cgi-bin conf create_vhost.sh error html icons manual mediawiki phpMyAdmin rackspace scripts sqlbuddy usage vhosts ) = 125 close(1) = 0 munmap(0x7f3093b18000, 4096) = 0 close(2) = 0 exit_group(0) = ?

  Read the article

• Does this prove a network bandwidth bottleneck?

  - by Yuji Tomita

  I've incorrectly assumed that my internal AB testing means my server can handle 1k concurrency @3k hits per second. My theory at at the moment is that the network is the bottleneck. The server can't send enough data fast enough. External testing from blitz.io at 1k concurrency shows my hits/s capping off at 180, with pages taking longer and longer to respond as the server is only able to return 180 per second. I've served a blank file from nginx and benched it: it scales 1:1 with concurrency. Now to rule out IO / memcached bottlenecks (nginx normally pulls from memcached), I serve up a static version of the cached page from the filesystem. The results are very similar to my original test; I'm capped at around 180 RPS. Splitting the HTML page in half gives me double the RPS, so it's definitely limited by the size of the page. If I internally ApacheBench from the local server, I get consistent results of around 4k RPS on both the Full Page and the Half Page, at high transfer rates. Transfer rate: 62586.14 [Kbytes/sec] received If I AB from an external server, I get around 180RPS - same as the blitz.io results. How do I know it's not intentional throttling? If I benchmark from multiple external servers, all results become poor which leads me to believe the problem is in MY servers outbound traffic, not a download speed issue with my benchmarking servers / blitz.io. So I'm back to my conclusion that my server can't send data fast enough. Am I right? Are there other ways to interpret this data? Is the solution/optimization to set up multiple servers + load balancing that can each serve 180 hits per second? I'm quite new to server optimization, so I'd appreciate any confirmation interpreting this data. Outbound traffic Here's more information about the outbound bandwidth: The network graph shows a maximum output of 16 Mb/s: 16 megabits per second. Doesn't sound like much at all. Due to a suggestion about throttling, I looked into this and found that linode has a 50mbps cap (which I'm not even close to hitting, apparently). I had it raised to 100mbps. Since linode caps my traffic, and I'm not even hitting it, does this mean that my server should indeed be capable of outputting up to 100mbps but is limited by some other internal bottleneck? I just don't understand how networks at this large of a scale work; can they literally send data as fast as they can read from the HDD? Is the network pipe that big? In conclusion 1: Based on the above, I'm thinking I can definitely raise my 180RPS by adding an nginx load balancer on top of a multi nginx server setup at exactly 180RPS per server behind the LB. 2: If linode has a 50/100mbit limit that I'm not hitting at all, there must be something I can do to hit that limit with my single server setup. If I can read / transmit data fast enough locally, and linode even bothers to have a 50mbit/100mbit cap, there must be an internal bottleneck that's not allowing me to hit those caps that I'm not sure how to detect. Correct? I realize the question is huge and vague now, but I'm not sure how to condense it. Any input is appreciated on any conclusion I've made.

  Read the article

• Performance issues when using SSD for a developer notebook (WAMP/LAMP stack)?

  - by András Szepesházi

  I'm a web application developer using my notebook as a standalone development environment (WAMP stack). I just switched from a Core2-duo Vista 32 bit notebook with 2Gb RAM and SATA HDD, to an i5-2520M Win7 64 bit with 4Gb RAM and 128 GB SDD (Corsair P3 128). My initial experience was what I expected, fast boot, quick load of all the applications (Eclipse takes now 5 seconds as opposed to 30s on my old notebook), overall great experience. Then I started to build up my development stack, both as LAMP (using VirtualBox with a debian guest) and WAMP (windows native apache + mysql + php). I wanted to compare those two. This still all worked great out, then I started to pull in my projects to these stacks. And here came the nasty surprise, one of those projects produced a lot worse response times than on my old notebook (that was true for both the VirtualBox and WAMP stack). Apache, php and mysql configurations were practically identical in all environments. I started to do a lot of benchmarking and profiling, and here is what I've found: All general benchmarks (Performance Test 7.0, HDTune Pro, wPrime2 and some more) gave a big advantage to the new notebook. Nothing surprising here. Disc specific tests showed that read/write operations peaked around 380M/160M for the SSD, and all the different sized block operations also performed very well. Started apache performance benchmarking with Apache Benchmark for a small static html file (10 concurrent threads, 500 iterations). Old notebook: min 47ms, median 111ms, max 156ms New WAMP stack: min 71ms, median 135ms, max 296ms New LAMP stack (in VirtualBox): min 6ms, median 46ms, max 175ms Right here I don't get why the native WAMP stack performed so bad, but at least the LAMP environment brought the expected speed. Apache performance measurement for non-cached php content. The php runs a loop of 1000 and generates sha1(uniqid()) inisde. Again, 10 concurrent threads, 500 iterations were used for the benchmark. Old notebook: min 0ms, median 39ms, max 218ms New WAMP stack: min 20ms, median 61ms, max 186ms New LAMP stack (in VirtualBox): min 124ms, median 704ms, max 2463ms What the hell? The new LAMP performed miserably, and even the new native WAMP was outperformed by the old notebook. php + mysql test. The test consists of connecting to a database and reading a single record form a table using INNER JOIN on 3 more (indexed) tables, repeated 100 times within a loop. Databases were identical. 10 concurrent threads, 100 iterations were used for the benchmark. Old notebook: min 1201ms, median 1734ms, max 3728ms New WAMP stack: min 367ms, median 675ms, max 1893ms New LAMP stack (in VirtualBox): min 1410ms, median 3659ms, max 5045ms And the same test with concurrency set to 1 (instead of 10): Old notebook: min 1201ms, median 1261ms, max 1357ms New WAMP stack: min 399ms, median 483ms, max 539ms New LAMP stack (in VirtualBox): min 285ms, median 348ms, max 444ms Strictly for my purposes, as I'm using a self contained development environment (= low concurrency) I could be satisfied with the second test's result. Though I have no idea why the VirtualBox environment performed so bad with higher concurrency. Finally I performed a test of including many php files. The application that I mentioned at the beginning, the one that was performing so bad, has a heavy bootstrap, loads hundreds of small library and configuration files while initializing. So this test does nothing else just includes about 100 files. Concurrency set to 1, 100 iterations: Old notebook: min 140ms, median 168ms, max 406ms New WAMP stack: min 434ms, median 488ms, max 604ms New LAMP stack (in VirtualBox): min 413ms, median 1040ms, max 1921ms Even if I consider that VirtualBox reached those files via shared folders, and that slows things down a bit, I still don't see how could the old notebook outperform so heavily both new configurations. And I think this is the real root of the slow performance, as the application uses even more includes, and the whole bootstrap will occur several times within a page request (for each ajax call, for example). To sum it up, here I am with a brand new high-performance notebook that loads the same page in 20 seconds, that my old notebook can do in 5-7 seconds. Needless to say, I'm not a very happy person right now. Why do you think I experience these poor performance values? What are my options to remedy this situation?

  Read the article

< Previous Page | 81 82 83 84 85 86 87  | Next Page >