Search Results

Search found 3522 results on 141 pages for 'ams 23'.

Page 85/141 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • GPU hung when switching graphic card

    - by Lie Ryan
    I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

    Read the article

  • Transform Your Application Integration with Best Practices from Oracle Customers

    - by Lionel Dubreuil
    You want to transform your application integration into an environment based on a service-oriented architecture (SOA). You also want to utilize business process management (BPM) to improve efficiency, deliver business agility, lower total cost of ownership, and increase business visibility. And you want to hear directly from like-minded professionals who have made those types of transformations. Easy enough. Attend this Webcast series to learn from customers who have successfully integrated with Oracle SOA and BPM solutions.Join us for this series and discover how to: Use a single unified platform for all types of processes Increase real-time process visibility Improve efficiency of existing IT investments Lower up-front costs and achieve faster time to market Gain greater benefit from SOA with the addition of BPM Here's the list of upcoming webcasts: “Migrating to SOA at Choice Hotels” on Thurs., June 21, 2012 — 10 a.m. PT / 1 p.m. ET Hear how Choice Hotels successfully made the transition from a complex legacy environment into a SOA-based shared services infrastructure that accelerated time to market as the company implemented its event-driven Google API project. “San Joaquin County—Optimizing Justice and Public Safety with Oracle BPM and Oracle SOA” on Thurs., July 26, 2012 — 10 a.m. PT / 1 p.m. ET Learn how San Joaquin County moved to a service-oriented architecture foundation and business process management platform to gain efficiency and greater visibility into mission-critical information for public safety. “Streamlining Order to Cash with SOA at Eaton” on Thurs., August 23, 2012 — 10 a.m. PT / 1 p.m. ET Discover how Eaton transitioned from a legacy TIBCO infrastructure. Learn about the company’s reference architecture for a SOA-based Oracle Fusion Distributed Order Orchestration (DOO). “Fast BPM Implementation with Fusion: Production in Five Months” on Thurs., September 13, 2012 — 10 a.m. PT / 1 p.m. ET Learn how Nets Denmark A/S implemented Oracle Unified Business Process Management Suite in just five months. The Webcast will cover the implementation from start to production, including integration with legacy systems. “SOA Implementation at Farmers Insurance” on Thurs., October 18, 2012 — 10 a.m. PT / 1 p.m. ET Learn how Farmers Insurance Group lowered application infrastructure costs, reduced time to market, and introduced flexibility by transforming to a SOA-based infrastructure with SOA governance. Register today!

    Read the article

  • Transform Your Application Integration with Best Practices from Oracle Customers

    - by Lionel Dubreuil
    You want to transform your application integration into an environment based on a service-oriented architecture (SOA). You also want to utilize business process management (BPM) to improve efficiency, deliver business agility, lower total cost of ownership, and increase business visibility. And you want to hear directly from like-minded professionals who have made those types of transformations. Easy enough. Attend this Webcast series to learn from customers who have successfully integrated with Oracle SOA and BPM solutions.Join us for this series and discover how to: Use a single unified platform for all types of processes Increase real-time process visibility Improve efficiency of existing IT investments Lower up-front costs and achieve faster time to market Gain greater benefit from SOA with the addition of BPM Here's the list of upcoming webcasts: “Migrating to SOA at Choice Hotels” on Thurs., June 21, 2012 — 10 a.m. PT / 1 p.m. ET Hear how Choice Hotels successfully made the transition from a complex legacy environment into a SOA-based shared services infrastructure that accelerated time to market as the company implemented its event-driven Google API project. “San Joaquin County—Optimizing Justice and Public Safety with Oracle BPM and Oracle SOA” on Thurs., July 26, 2012 — 10 a.m. PT / 1 p.m. ET Learn how San Joaquin County moved to a service-oriented architecture foundation and business process management platform to gain efficiency and greater visibility into mission-critical information for public safety. “Streamlining Order to Cash with SOA at Eaton” on Thurs., August 23, 2012 — 10 a.m. PT / 1 p.m. ET Discover how Eaton transitioned from a legacy TIBCO infrastructure. Learn about the company’s reference architecture for a SOA-based Oracle Fusion Distributed Order Orchestration (DOO). “Fast BPM Implementation with Fusion: Production in Five Months” on Thurs., September 13, 2012 — 10 a.m. PT / 1 p.m. ET Learn how Nets Denmark A/S implemented Oracle Unified Business Process Management Suite in just five months. The Webcast will cover the implementation from start to production, including integration with legacy systems. “SOA Implementation at Farmers Insurance” on Thurs., October 18, 2012 — 10 a.m. PT / 1 p.m. ET Learn how Farmers Insurance Group lowered application infrastructure costs, reduced time to market, and introduced flexibility by transforming to a SOA-based infrastructure with SOA governance. Register today!

    Read the article

  • Transform Your Application Integration with Best Practices from Oracle Customers

    - by Lionel Dubreuil
    You want to transform your application integration into an environment based on a service-oriented architecture (SOA). You also want to utilize business process management (BPM) to improve efficiency, deliver business agility, lower total cost of ownership, and increase business visibility. And you want to hear directly from like-minded professionals who have made those types of transformations. Easy enough. Attend this Webcast series to learn from customers who have successfully integrated with Oracle SOA and BPM solutions.Join us for this series and discover how to: Use a single unified platform for all types of processes Increase real-time process visibility Improve efficiency of existing IT investments Lower up-front costs and achieve faster time to market Gain greater benefit from SOA with the addition of BPM Here's the list of upcoming webcasts: “Migrating to SOA at Choice Hotels” on Thurs., June 21, 2012 — 10 a.m. PT / 1 p.m. ET Hear how Choice Hotels successfully made the transition from a complex legacy environment into a SOA-based shared services infrastructure that accelerated time to market as the company implemented its event-driven Google API project. “San Joaquin County—Optimizing Justice and Public Safety with Oracle BPM and Oracle SOA” on Thurs., July 26, 2012 — 10 a.m. PT / 1 p.m. ET Learn how San Joaquin County moved to a service-oriented architecture foundation and business process management platform to gain efficiency and greater visibility into mission-critical information for public safety. “Streamlining Order to Cash with SOA at Eaton” on Thurs., August 23, 2012 — 10 a.m. PT / 1 p.m. ET Discover how Eaton transitioned from a legacy TIBCO infrastructure. Learn about the company’s reference architecture for a SOA-based Oracle Fusion Distributed Order Orchestration (DOO). “Fast BPM Implementation with Fusion: Production in Five Months” on Thurs., September 13, 2012 — 10 a.m. PT / 1 p.m. ET Learn how Nets Denmark A/S implemented Oracle Unified Business Process Management Suite in just five months. The Webcast will cover the implementation from start to production, including integration with legacy systems. “SOA Implementation at Farmers Insurance” on Thurs., October 18, 2012 — 10 a.m. PT / 1 p.m. ET Learn how Farmers Insurance Group lowered application infrastructure costs, reduced time to market, and introduced flexibility by transforming to a SOA-based infrastructure with SOA governance. Register today!

    Read the article

  • Transform Your Application Integration with Best Practices from Oracle Customers

    - by Lionel Dubreuil
    You want to transform your application integration into an environment based on a service-oriented architecture (SOA). You also want to utilize business process management (BPM) to improve efficiency, deliver business agility, lower total cost of ownership, and increase business visibility. And you want to hear directly from like-minded professionals who have made those types of transformations. Easy enough. Attend this Webcast series to learn from customers who have successfully integrated with Oracle SOA and BPM solutions.Join us for this series and discover how to: Use a single unified platform for all types of processes Increase real-time process visibility Improve efficiency of existing IT investments Lower up-front costs and achieve faster time to market Gain greater benefit from SOA with the addition of BPM Here's the list of upcoming webcasts: “Migrating to SOA at Choice Hotels” on Thurs., June 21, 2012 — 10 a.m. PT / 1 p.m. ET Hear how Choice Hotels successfully made the transition from a complex legacy environment into a SOA-based shared services infrastructure that accelerated time to market as the company implemented its event-driven Google API project. “San Joaquin County—Optimizing Justice and Public Safety with Oracle BPM and Oracle SOA” on Thurs., July 26, 2012 — 10 a.m. PT / 1 p.m. ET Learn how San Joaquin County moved to a service-oriented architecture foundation and business process management platform to gain efficiency and greater visibility into mission-critical information for public safety. “Streamlining Order to Cash with SOA at Eaton” on Thurs., August 23, 2012 — 10 a.m. PT / 1 p.m. ET Discover how Eaton transitioned from a legacy TIBCO infrastructure. Learn about the company’s reference architecture for a SOA-based Oracle Fusion Distributed Order Orchestration (DOO). “Fast BPM Implementation with Fusion: Production in Five Months” on Thurs., September 13, 2012 — 10 a.m. PT / 1 p.m. ET Learn how Nets Denmark A/S implemented Oracle Unified Business Process Management Suite in just five months. The Webcast will cover the implementation from start to production, including integration with legacy systems. “SOA Implementation at Farmers Insurance” on Thurs., October 18, 2012 — 10 a.m. PT / 1 p.m. ET Learn how Farmers Insurance Group lowered application infrastructure costs, reduced time to market, and introduced flexibility by transforming to a SOA-based infrastructure with SOA governance. Register today!

    Read the article

  • Atheros AR928X wireless connection makes neighbourhood machine drop off line

    - by funicorn
    I have an Acer laptop with Atheros AR928X wireless card installed, supported by ath9k driver in the linux kernel. There are other 5 computers sharing wireless connection via a TPLink 150Mbit/s wireless router. At first I found the network is a little bit slower than it's in Windows7, which I accepted as it should be. However a very strange thing is, each time I connected to the router and downloaded stuff for a while, one of the computers running Windows7 in my local network dropped off from the router. And if I run my laptop under Windows7, everything is fine. What's even stranger is although the network becomes slower, only the certain computer drops and totally freezes in connection with the router. I'm not willing to conclude it's due to the unhealthy connection from my laptop to the router, however we have confirmed this for more than one times and there is no problem with the network when I'm running WIndows7. I'm extremely confused about what's going on. As a Linux user running Ubuntu over 5 years, I am awared that wireless driver in Linux is badly notorious of lack of stability and slow speed. But is it so bad that the unhealthy wireless connection can do damage to another computer in the same local network? I do see a lot of "Tx excessive retries" in iwconfig output. But how exactly does this happen ? Thanks for your help. I guess I have to use this answer box to show the outputs $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=47/70 Signal level=-63 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:2 Invalid misc:23 Missed beacon:0 To show what's wrong with the wireless connection, I ran iwconfig again within 3 minutes, during which time I hardly did anything and the network was not much busy than being nearly idle $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:9 Invalid misc:28 Missed beacon:0 You can see Tx excessive retires and Invalid misc increase very quickly. $ sudo iwlist wlan0 modu wlan0 unknown modulation information. $ sudo iwlist wlan0 channel wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Current Frequency:2.427 GHz (Channel 4)

    Read the article

  • Data Generator Source Adapter

    This component needs little explanation. It generates random integer (DT_I4) and string (DT_WSTR) data and places them in the pipeline. You specify how many columns of each you would like and for any string columns you pass a fixed length value. You then need to specify how many rows in total you require to be generated. This component is used by us to do testing of the pipeline and components downstream. Previously we would have used a script component (as a source) to generate the rows but found ourselves rewriting the code too often so created this component. Screenshots SQL Server 2005 Integration Services SQL Server 2008/2012 Integration Services The component is provided as an MSI file, however to complete the installation, you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Data Generator Source from the list. Downloads The Data Generator Source Adapter is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Data Generator Source Adapter for SQL Server 2005 Data Generator Source Adapter for SQL Server 2008 Data Generator Source Adapter for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.30 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.29 - SQL Server 2008 February 2008 CTP. Includes support for upgrade of 2005 packages. Simplified user interface. (4 Mar 2008) Version 2.0.0.27 - SQL Server 2008 November 2007 CTP. String columns will now use the default system code page. Previously string columns always used 1252. (15 Feb 2008) SQL Server 2005 Version 1.1.0.23 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. (12 Jun 2006) Version 1.0.0.0 - SQL Server 2005 IDW 16 Sept CTP. Public release. (6 Oct 2005)

    Read the article

  • "Package dependencies cannot be resolved" error when installing software

    - by Savitha
    Iam getting a problem while install media player packages. Package dependencies cannot be resolved This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time. Depends: libc6 (>= 2.7) but 2.13-0ubuntu13 is to be installed Depends: libglib2.0-0 (>= 2.24.0) but 2.28.6-0ubuntu1 is to be installed Depends: libgstreamer-plugins-base0.10-0 (>= 0.10.22) but 0.10.32-1ubuntu5 is to be installed Depends: libgstreamer0.10-0 (>= 0.10.26) but 0.10.32-3ubuntu3 is to be installed Depends: liborc-0.4-0 (>= 1:0.4.10) but 1:0.4.11-2 is to be installed Depends: libpostproc-extra-51 (>= 4:0.6-1~) but 4:0.6.4-1ubuntu1+medibuntu1 is to be installed Depends: libswscale-extra-0 (>= 4:0.6-1~) but 4:0.6.4-1ubuntu1+medibuntu1 is to be installed gstreamer0.10-plugins-bad: Depends: libc6 (>= 2.7) but 2.13-0ubuntu13 is to be installed Depends: libcairo2 (>= 1.2.4) but 1.10.2-2ubuntu2 is to be installed Depends: libcdaudio1 (>= 0.99.12p2) but 0.99.12p2-9 is to be installed Depends: libdc1394-22 but it is not going to be installed Depends: libdirectfb-1.2-9 but it is not going to be installed Depends: libflite1 but it is not going to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.5.2-8ubuntu4 is to be installed Depends: libglib2.0-0 (>= 2.26.0) but 2.28.6-0ubuntu1 is to be installed Depends: libgsm1 (>= 1.0.13) but it is not going to be installed Depends: libgstreamer-plugins-base0.10-0 (>= 0.10.32) but 0.10.32-1ubuntu5 is to be installed Depends: libgstreamer0.10-0 (>= 0.10.32) but 0.10.32-3ubuntu3 is to be installed Depends: libjasper1 (>= 1.900.1) but 1.900.1-7ubuntu2 is to be installed Depends: libmodplug1 but it is not going to be installed Depends: libmpcdec6 (>= 1:0.1~r435) but it is not going to be installed Depends: libmusicbrainz4c2a (>= 2.1.5) but it is not going to be installed Depends: libofa0 (>= 0.9.3) but it is not going to be installed Depends: liborc-0.4-0 (>= 1:0.4.10) but 1:0.4.11-2 is to be installed Depends: libpng12-0 (>= 1.2.13-4) but 1.2.44-1ubuntu3 is to be installed Depends: librsvg2-2 (>= 2.26.0) but 2.32.1-0ubuntu3 is to be installed Depends: librtmp0 (>= 2.3) but 2.3-2 is to be installed Depends: libschroedinger-1.0-0 (>= 1.0.9) but it is not going to be installed Depends: libsndfile1 (>= 1.0.20) but 1.0.23-1build1 is to be installed Depends: libstdc++6 (>= 4.1.1) but 4.5.2-8ubuntu4 is to be installed Depends: libvpx0 (>= 0.9.0) but it is not going to be installed gstreamer0.10-plugins-ugly: Depends: libc6 (>= 2.7) but 2.13-0ubuntu13 is to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.5.2-8ubuntu4 is to be installed Depends: libglib2.0-0 (>= 2.24.0) but 2.28.6-0ubuntu1 is to be installed Depends: libgstreamer-plugins-base0.10-0 (>= 0.10.26) but 0.10.32-1ubuntu5 is to be installed Depends: libgstreamer0.10-0 (>= 0.10.26) but 0.10.32-3ubuntu3 is to be installed Depends: libid3tag0 (>= 0.15.1b) but it is not going to be installed Depends: libmad0 (>= 0.15.1b-3) but it is not going to be installed Depends: liborc-0.4-0 (>= 1:0.4.10) but 1:0.4.11-2 is to be installed Depends: libstdc++6 (>= 4.1.1) but 4.5.2-8ubuntu4 is to be installed

    Read the article

  • Playing with F#

    - by mroberts
    Project Euler is a awesome site.   When working with a new language it can be tricky to find problems that need solving, that are more complex than "Hello World" and simpler than a full blown application. Project Euler gives use just that, cool and thought provoking problems that usually don't take days to solve.  I've solved a number of questions with C# and some with Java.  BTW, I used Java because it had BigInteger support before .Net. A couple weeks ago, back when winter had a firm grip on Columbus, OH, I began playing (researching) with F#.  I began with Problem #1 from Project Euler.  I started by looking at my solution in C#. Here is my solution in C#. 1: using System; 2: using System.Collections.Generic; 3:   4: namespace Problem001 5: { 6: class Program 7: { 8: static void Main(string[] args) 9: { 10: List<int> values = new List<int>(); 11:   12: for (int i = 1; i < 1000; i++) 13: { 14: if (i % 3 == 0 || i % 5 == 0) 15: values.Add(i); 16: } 17: int total = 0; 18:   19: values.ForEach(v => total += v); 20:   21: Console.WriteLine(total); 22: Console.ReadKey(); 23: } 24: } 25: }   Now, after much tweaking and learning, here is my solution in F#.   1: open System 2:   3: let calc n = 4: [1..n] 5: |> List.map (fun x -> if (x % 3 = 0 || x % 5 = 0) then x else 0) 6: |> List.sum 7:   8: let main() = 9: calc 999 10: |> printfn "result = %d" 11: Console.ReadKey(true) |> ignore 12:   13: main() Just this little example highlights some cool things about F#. Type inference. F# infers the type of a value.  In the C# code above we declare a number of variables, the list, and a couple ints.  F# does not require this, it infers the calc (a function) accepts a int and returns a int. Great built in functionality for Lists.  List.map for example. BTW, I don’t think I’m spilling the beans by giving away the code for Problem 1.  It by far is the easiest question, IMHO, solved by 92,000+ people. Next I’ll look into writing a class library with F#.

    Read the article

  • Checking if an Unloaded Collection Contains Elements

    - by Ricardo Peres
    If you want to know if an unloaded collection in an entity contains elements, or count them, without actually loading them, you need to use a custom query; that is because the Count property (if the collection is not mapped with lazy=”extra”) and the LINQ Count() and Any() methods force the whole collection to be loaded. You can use something like these two methods, one for checking if there are any values, the other for actually counting them: 1: public static Boolean Exists(this ISession session, IEnumerable collection) 2: { 3: if (collection is IPersistentCollection) 4: { 5: IPersistentCollection col = collection as IPersistentCollection; 6:  7: if (col.WasInitialized == false) 8: { 9: String[] roleParts = col.Role.Split('.'); 10: String ownerTypeName = String.Join(".", roleParts, 0, roleParts.Length - 1); 11: String ownerCollectionName = roleParts.Last(); 12: String hql = "select 1 from " + ownerTypeName + " it where it.id = :id and exists elements(it." + ownerCollectionName + ")"; 13: Boolean exists = session.CreateQuery(hql).SetParameter("id", col.Key).List().Count == 1; 14:  15: return (exists); 16: } 17: } 18:  19: return ((collection as IEnumerable).OfType<Object>().Any()); 20: } 21:  22: public static Int64 Count(this ISession session, IEnumerable collection) 23: { 24: if (collection is IPersistentCollection) 25: { 26: IPersistentCollection col = collection as IPersistentCollection; 27:  28: if (col.WasInitialized == false) 29: { 30: String[] roleParts = col.Role.Split('.'); 31: String ownerTypeName = String.Join(".", roleParts, 0, roleParts.Length - 1); 32: String ownerCollectionName = roleParts.Last(); 33: String hql = "select count(elements(it." + ownerCollectionName + ")) from " + ownerTypeName + " it where it.id = :id"; 34: Int64 count = session.CreateQuery(hql).SetParameter("id", col.Key).UniqueResult<Int64>(); 35:  36: return (count); 37: } 38: } 39:  40: return ((collection as IEnumerable).OfType<Object>().Count()); 41: } Here’s how: 1: MyEntity entity = session.Load(100); 2:  3: if (session.Exists(entity.SomeCollection)) 4: { 5: Int32 count = session.Count(entity.SomeCollection); 6: //... 7: }

    Read the article

  • Free book from Microsoft on on Office 365

    - by TATWORTH
    At http://blogs.msdn.com/b/microsoft_press/archive/2011/08/17/free-ebook-microsoft-office-365-connect-and-collaborate-virtually-anywhere-anytime.aspx  you can get a free book from Microsoft on Office 365 (Epub and mobi formats are available at http://blogs.msdn.com/b/microsoft_press/archive/2011/09/23/free-ebook-microsoft-office-365-connect-and-collaborate-virtually-anywhere-anytime-now-in-more-formats.aspx)

    Read the article

  • Ubuntu 13.04 boot into black screen, even after installing nvidia drivers, fail at: "Starting Reload cups, upon starting avahi-daemon..."

    - by Elad92
    I got a new machine with i7 4770k and gefore gtx660. I installed windows and then installed Ubuntu 13.04. In the installation everything went well, after the installation I again boot from the USB and choose try ubuntu, and installed boot-repair because windows automatically boot with no option for ubuntu. After I repaired the boot, I restarted and got into grub, when I chose Ubuntu I got message saying I'm running on low graphics mode and when I pressed ok the screen turned off. I couldn't do anything so I restarted and after reading this post: My computer boots to a black screen, what options do I have to fix it? I got into recovery, selected dpkg and repaired packages. Then I rebooted, and tried to press 'e' and change quiet splash to no splash and nomodeset but unfortunately both of them didn't work, and not the screen didn't get turned off, but I just saw a blank screen. So I rebooted again, entered the recovery, and this time I went to the root shell, and tried to install nvidia drivers from this guide here: http://www.howopensource.com/2012/10/install-nvidia-geforce-driver-in-ubuntu-12-10-12-04-using-ppa/ I rebooted and got the same black screen again (the screen didn't go off, just saw a blank screen). In the grub I see that the kernel is 3.8.0-25. I also checked that the usb files are not corrupted using the check CD from the ubuntu installation screen. I'm really frustrated, I don't know what else can I do. (If someone also knows how can I connect to wifi using the root shell it will be very appreciated, because when I choose the 'enable networking' it again booting me to a black screen. Thanks Edit After digging more, I again boot with nomodeset and saw where is it failing, this is the lines I saw: * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [OK] * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [fail] I searched for it in google and this is the closest result I got: http://ubuntuforums.org/showthread.php?t=2144261 i didn't find any way to solve it in the internet, from what I understand this is a problem with 13.04. If someone knows how to fix it I will be very grateful. Thanks Edit 2 - 23.6.13 As Mitch suggested, I disabled the avahi-daemon, and when I boot in nomodeset I get the following error: What else can be the problem?

    Read the article

  • Ubuntu hangs on booting up after a update

    - by alFReD NSH
    I've made a clean install yesterday, for the first time restarted, everything went good and then after I updated packages and copied my old home directory to replace the new one, when I restarted it hung when it was booting. I tried reinstalling again and doing the same thing, but again same thing happened. Here's what I see, before when the Ubuntu logo with the five dots is shown: Then after that, 3 or 4 of the dots will load and hangs there. If I press arrow up before that, this will be shown I started my laptop again today(the pictures are for the day before) and after that, boot up with live CD and got the logs. dmesg: http://pastebin.com/aVxV7BQF syslog: http://pastebin.com/4E2BrRUK And some info: alfred@alFitop:~$ uname -a Linux alFitop 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: http://pastebin.com/AZbKJmsT sources.list : http://pastebin.com/2HazmuyV My problem is a bit similar to here: http://ubuntuforums.org/showthread.php?t=1918271 Though I didn't change my x.org config. Only changed home directory and updated packages. I've tried memtest and fschk, both passed. In the recovery mode boot option, I've also realized that same things happen in failsafe graphical mode. But when I go into the network mode, I can boot up my system, but of course same the graphics are just basic. Adding blacklist intel_ips to /etc/modprobe.d/blacklist.conf solves the first message, but still I get the broken pipe and CPU stack traces. The current kernel version is 3.2.0-25, I've tried booting up in the 3.2.0-23(the one the installer came with, but same results.) Also uninstalled apparmor, didn't help. I've installed Ubuntu again, this time without copying the home directory, also same result. --- UPDATE --- This problem was solved before with removing backports, but its back again! I've updated my laptop last night and the problem came back. It's definitely one of these packages. My /var/log/apt/term.log and /var/log/apt/history.log. I'm almost having the same situation. --- UPDATE --- I realized this also have happened on times that I have updated(haven't restarted after it) and my computer power has been cut off and its shutdown due to lack of power. And I realized if I just do as I answered but not in somewhere without GUI(networking mode has the GUI) it wouldn't work.

    Read the article

  • following a moving sprite

    - by iQue
    Im trying to get my enemies to follow my main-character of the game (2D), but for some reason the game starts lagging like crazy when I do it the way I want to do it, and the following-part dosnt work 100% either, its just 1/24 enemies that comes to my sprite, the other 23 move towards it but stay at a certain point. Might be a poor explenation but dont know how else to put it. Code for moving my enemies: private int enemyX(){ int x = 0; for (int i = 0; i < enemies.size(); i++){ if (controls.pointerPosition.x > enemies.get(i).getX()){//pointerPosition is the position of my main-sprite. x = 5; } else{ x=-5; } Log.d(TAG, "happyX HERE: " + controls.pointerPosition.x); Log.d(TAG, "enemyX HERE: " + enemies.get(i).getX()); } return x; } private int enemyY(){ int y = 0; for (int i = 0; i < enemies.size(); i++){ if (controls.pointerPosition.y > enemies.get(i).getY()){ y = 5; } else{ y=-5; } } return y; } I send it to the update-method in my Enemy-class: private void drawEnemy(Canvas canvas){ addEnemies(); // a method where I add enemies to my arrayList, no parameters except bitmap. for(int i = 0; i < enemies.size(); i++){ enemies.get(i).update(enemyX(), enemyY()); } for(int i = 0; i < enemies.size(); i++){ enemies.get(i).draw(canvas); } } and finally, the update-method itself, located in my Enemy-class: public void update(int velX, int velY) { x += velX; //sets x before I draw y += velY; //sets y before I draw currentFrame = ++currentFrame % BMP_COLUMNS; } So can any1 figure out why it starts lagging so much and how I can fix it? Thanks for your time!

    Read the article

  • dpkg crashing while trying to install a package

    - by Jonathan
    While attempting to install a package via apt-get the following. The first error I get is: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. And, if I run that command the box spins out of control and I get the following in /var/log/syslog Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398546] ------------[ cut here ]------------ Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398552] WARNING: at /build/buildd/linux-3.0.0/arch/x86/xen/multicalls.c:182 xen_mc_flush+01c0() Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398561] Modules linked in: acpiphp Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398568] Pid: 31063, comm: java Tainted: G D W 3.0.0-14-virtual #23-Ubuntu Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398576] Call Trace: Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398580] [<c0648265>] ? printk+0x2d/0x2f Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398586] [<c0150462>] warn_slowpath_common+0x72/0xa0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398593] [<c0104883>] ? xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398599] [<c0104883>] ? xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398605] [<c01504b2>] warn_slowpath_null+0x22/0x30 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398611] [<c0104883>] xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398617] [<c0104e7a>] ? xen_extend_mmu_update+0x4a/0x70 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398624] [<c0106565>] xen_set_pud_hyper+0x75/0x80 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398630] [<c01065b9>] xen_set_pud+0x49/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398636] [<c0132105>] pud_populate+0x45/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398642] [<c0208a24>] __pmd_alloc+0x74/0x90 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398648] [<c0208cb7>] handle_mm_fault+0x277/0x2c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398655] [<c065f45b>] do_page_fault+0x15b/0x4a0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c020ba24>] ? remove_vma+0x44/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c020d9b6>] ? sys_mmap_pgoff+0x106/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c065f300>] ? vmalloc_fault+0x190/0x190 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c065c79f>] error_code+0x67/0x6c Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] ---[ end trace 0b105e2a179ad013 ]---

    Read the article

  • Rendering My Fault Message

    - by onefloridacoder
    My coworkers setup  a nice way to get the fault messages from our service layer all the way back to the client’s service proxy layer.  This is what I needed to work on this afternoon.  Through a series of trials and errors I finally figured this out. The confusion was how I was looking at the exception in the quick watch viewer.  It appeared as though the EventArgs from the service call had somehow magically been cast back to FaultException(), not FaultException<T>.  I drilled into the EventArgs object with the quick watch and I copied this code to figure out where the Fault message was hiding.  Further, when I copied this quick watch code into the IDE I got squigglies.  Poop. 1: ((System 2: .ServiceModel 3: .FaultException<UnhandledExceptionFault>)(((System.Exception)(e.Result)).InnerException)).Detail.FaultMessage I wont bore you with the details but here’s how it turned out.   EventArgs which I’m calling “e” is not the result such as some collection of items you’re expecting.  It’s actually a FaultException, or in my case FaultException<T>.  Below is the calling code and the callback to handle the expected response or the fault from the completed event. 1: public void BeginRetrieveItems(Action<ObservableCollection<Model.Widget>> FindItemsCompleteCallback, Model.WidgetLocation location) 2: { 3: var proxy = new MyServiceContractClient(); 4:  5: proxy.RetrieveWidgetsCompleted += (s, e) => FindWidgetsCompleteCallback(FindWidgetsCompleted(e)); 6:  7: RetrieveWidgetsRequest request = new RetrieveWidgetsRequest { location.Id }; 8:  9: proxy.RetrieveWidgetsAsync(request); 10: } 11:  12: private ObservableCollection<Model.Widget> FindItemsCompleted(RetrieveWidgetsCompletedEventArgs e) 13: { 14: if (e.Error is FaultException<UnhandledExceptionFault>) 15: { 16: var fault = (FaultException<UnhandledExceptionFault>)e.Error; 17: var faultDetailMessage = fault.Detail.FaultMessage; 18:  19: UIMessageControlDuJour.Show(faultDetailMessage); 20: return new ObservableCollection<BinInventoryItemCountInfo>(); 21: } 22:  23: var widgets = new ObservableCollection<Model.Widget>(); 24:  25: if (e.Result.Widgets != null) 26: { 27: e.Result.Widgets.ToList().ForEach(w => widgets.Add(this.WidgetMapper.Map(w))); 28: } 29:  30: return widgets; 31: }

    Read the article

  • Cannot install wine on Ubuntu natty 64bit [broken dependency]

    - by MHK
    I've just installed Ubuntu natty 64bit. Now I'm trying to install wine and no matter how I do it (Software center/synaptic/terminal), it fails. Here's what I tried on terminal: sudo apt-get update sudo apt-get install wine It shows: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine : Depends: wine1.3 but it is not going to be installed Depends: ia32-libs (>= 1.6) but it is not going to be installed Depends: lib32asound2 (> 1.0.14) but it is not going to be installed Depends: libc6-i386 (>= 2.6-1) but it is not going to be installed Depends: lib32nss-mdns (>= 0.10-3) but it is not going to be installed E: Broken packages Any body faced this? Is this a bug or something is broken on my end? Any hints on how to solve? Edit: I've tried with aptitude, it gives more clear message: sudo aptitude install wine Output: The following NEW packages will be installed: gnome-exe-thumbnailer{a} ia32-libs{a} icoutils{a} imagemagick{a} lib32asound2{ab} lib32bz2-1.0{a} lib32gcc1{ab} lib32ncurses5{a} lib32nss-mdns{a} lib32stdc++6{ab} lib32v4l-0{ab} lib32z1{a} libc6-i386{ab} libcdt4{a} libgraph4{a} libgvc5{a} libilmbase6{a} liblqr-1-0{a} libmagickcore3{a} libmagickcore3-extra{a} libmagickwand3{a} libnetpbm10{a} libopenexr6{a} libpathplan4{a} netpbm{a} ttf-droid{a} ttf-symbol-replacement-wine1.3{a} ttf-umefont{a} winbind{a} wine wine1.3{a} wine1.3-gecko{a} winetricks{a} 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 135 MB of archives. After unpacking 421 MB will be used. The following packages have unmet dependencies: libc6-i386: Depends: libc6 (= 2.12.1-0ubuntu16) but 2.13-0ubuntu13 is installed. lib32gcc1: Depends: gcc-4.5-base (= 4.5.2-2ubuntu3) but 4.5.2-8ubuntu4 is installed. lib32asound2: Depends: libasound2 (= 1.0.23-2.1ubuntu2) but 1.0.24.1-0ubuntu5 is installed. lib32stdc++6: Depends: gcc-4.5-base (= 4.5.2-2ubuntu3) but 4.5.2-8ubuntu4 is installed. lib32v4l-0: Depends: libv4l-0 (= 0.8.1-2) but 0.8.3-1 is installed. The following actions will resolve these dependencies: Keep the following packages at their current version: 1) ia32-libs [Not Installed] 2) lib32asound2 [Not Installed] 3) lib32bz2-1.0 [Not Installed] 4) lib32gcc1 [Not Installed] 5) lib32ncurses5 [Not Installed] 6) lib32nss-mdns [Not Installed] 7) lib32stdc++6 [Not Installed] 8) lib32v4l-0 [Not Installed] 9) lib32z1 [Not Installed] 10) libc6-i386 [Not Installed] 11) wine [Not Installed] 12) wine1.3 [Not Installed] Leave the following dependencies unresolved: 13) wine1.3-gecko recommends wine1.3 14) winetricks recommends wine1.2 | wine1.3 | cxoffice5 | cxgames5 It seems the wine package hasn't been updated in the repo. What should I do now?

    Read the article

  • F# Project Euler Problem 1

    - by MarkPearl
    Every now and then I give project Euler a quick browse. Since I have been playing with F# I have found it a great way to learn the basics of the language. Today I thought I would give problem 1 an attempt… Problem 1 If we list all the natural numbers below 10 that are multiples of 3 or 5, we get 3, 5, 6 and 9. The sum of these multiples is 23. Find the sum of all the multiples of 3 or 5 below 1000. My F# Solution I broke this problem into two functions… 1) be able to generate a collection of numbers that are multiples of a number but but are smaller than another number. let GenerateMultiplesOfXbelowY X Y = X |> Seq.unfold (fun i -> if (i<Y) then Some(i, i+X) else None) I then needed something that generated collections for multiples of 3 & 5 and then removed any duplicates. Once this was done I would need to sum these all together to get a result. I found the Seq object to be extremely useful to achieve this… let Multiples = Seq.append (GenerateMultiplesOfXbelowY 3 1000) (GenerateMultiplesOfXbelowY 5 1000) |> Seq.distinct |> Seq.fold(fun acc a -> acc + a) 0 |> Console.WriteLine |> Console.ReadLine My complete solution was … open System let GenerateMultiplesOfXbelowY X Y = X |> Seq.unfold (fun i -> if (i<Y) then Some(i, i+X) else None) let Multiples = Seq.append (GenerateMultiplesOfXbelowY 3 1000) (GenerateMultiplesOfXbelowY 5 1000) |> Seq.distinct |> Seq.fold(fun acc a -> acc + a) 0 |> Console.WriteLine |> Console.ReadLine   Which seemed to generate the correct result in a relatively short period of time although I am sure I will get some comments from the experts who know of some intrinsic method to achieve all of this in one method call.

    Read the article

  • "Untrusted packages could compromise your system's security." appears while trying to install anything

    - by maria
    Hi I've freshly installed Ubuntu 10.4 on a new computer. I'm trying to install on it application I need (my old computer is broken and I have to send it to the service). I've managed to install texlive and than I can't install anything else. All software I want to have is what I have succesfuly installed on my old computer (with the same version of Ubuntu), so I don't understand, why terminal says (sorry, the terminal talks half English, half Polish, but I hope it's enough): maria@marysia-ubuntu:~$ sudo aptitude install emacs Czytanie list pakietów... Gotowe Budowanie drzewa zaleznosci Odczyt informacji o stanie... Gotowe Reading extended state information Initializing package states... Gotowe The following NEW packages will be installed: emacs emacs23{a} emacs23-bin-common{a} emacs23-common{a} emacsen-common{a} 0 packages upgraded, 5 newly installed, 0 to remove and 0 not upgraded. Need to get 23,9MB of archives. After unpacking 73,8MB will be used. Do you want to continue? [Y/n/?] Y WARNING: untrusted versions of the following packages will be installed! Untrusted packages could compromise your system's security. You should only proceed with the installation if you are certain that this is what you want to do. emacs emacs23-bin-common emacsen-common emacs23-common emacs23 Do you want to ignore this warning and proceed anyway? To continue, enter "Yes"; to abort, enter "No" I was trying to install other editors as well, with the same result. As I decided that I might be sure that I know the package I want to install is secure, finaly I've entered "Yes". The installation ended succesfuly, but editor don't understand any .tex file (.tex files are for sure fine): this is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian) restricted \write18 enabled. entering extended mode (./Szarfi.tex ! Undefined control sequence. l.2 \documentclass {book} ? What's more, I've realised that in Synaptic Manager there is no package which would be marked as supported by Canonical... Any tips? Thanks in advance

    Read the article

  • Wireless connection by using command screen

    - by Amadeus
    I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

    Read the article

  • Silverlight and WCF caching

    - by subodhnpushpak
    There are scenarios where Silverlight client calls WCF (or REST) service for data. Now, if the data is cached on the WCF layer, the calls can take considerable resources at the server if NOT cached. Keeping that in mind along with the fact that cache is an cross-cutting aspect, and therefore it should be as easy as possible to put Cache wherever required. The good thing about the solution is that it caches based on the inputs. The input can be basic type of any complex type. If input changes the data is fetched and then cached for further used. If same input is provided again, data id fetched from the cache. The cache logic itself is implemented as PostSharp aspect, and it is as easy as putting an attribute over service call to switch on cache. Notice how clean the code is:        [OperationContract]       [CacheOnArgs(typeof(int))] // based on actual value of cache        public string DoWork(int value)        {            return string.Format("You entered: {0} @ cached time {1}", value, System.DateTime.Now);        } The cache is implemented as POST Sharp as below 1: public override void OnInvocation(MethodInvocationEventArgs eventArgs) 2: { 3: try 4: { 5: object value = new object(); 6: object[] args = eventArgs.GetArgumentArray(); 7: if (args != null || args.Count() > 0) 8: { 9:   10: string key = string.Format("{0}_{1}", eventArgs.Method.Name, XMLUtility<object>.GetDataContractXml(args[0], null));// Compute the cache key (details omitted). 11:   12: 13: value = GetFromCache(key); 14: if (value == null) 15: { 16: eventArgs.Proceed(); 17: value = XMLUtility<object>.GetDataContractXml(eventArgs.ReturnValue, null); 18: value = eventArgs.ReturnValue; 19: AddToCache(key, value); 20: return; 21: } 22:   23:   24: Log(string.Format("Data returned from Cache {0}",value)); 25: eventArgs.ReturnValue = value; 26: } 27: } 28: catch (Exception ex) 29: { 30: //ApplicationLogger.LogException(ex.Message, Source.UtilityService); 31: } 32: } 33:   34: private object GetFromCache(string inputKey) { if (ServerConfig.CachingEnabled) { return WCFCache.Current[inputKey]; } return null; }private void AddToCache(string inputKey,object outputValue) 35: { 36: if (ServerConfig.CachingEnabled) 37: { 38: if (WCFCache.Current.CachedItemsNumber < ServerConfig.NumberOfCachedItems) 39: { 40: if (ServerConfig.SlidingExpirationTime <= 0 || ServerConfig.SlidingExpirationTime == int.MaxValue) 41: { 42: WCFCache.Current[inputKey] = outputValue; 43: } 44: else 45: { 46: WCFCache.Current.Insert(inputKey, outputValue, new TimeSpan(0, 0, ServerConfig.SlidingExpirationTime), true); 47:   48: // _bw.DoWork += bw_DoWork; 49: //string arg = string.Format("{0}|{1}", inputKey,outputValue); 50: //_bw.RunWorkerAsync(inputKey ); 51: } 52: } 53: } 54: }     The cache class can be extended to support Velocity / memcahe / Nache. the attribute can be used over REST services as well. Hope the above helps. Here is the code base for the same.   Please do provide your inputs / comments.

    Read the article

  • Increase Availability for Data Center Virtual Environments

    - by Antoinette O'Sullivan
    With Oracle VM, you can increase availability and add flexibility for data center virtual environments. To get started, take training on Oracle VM Server for x86 and Oracle VM Server for SPARC as appropriate for your systems. You can take these live instructor-led courses from your own desk as a live-virtual event or travel to an education center for an in-class event. The Oracle VM Administration: Oracle VM Server for x86 course, in 3 days, teaches you about creating NFS and iSCI repositories, migration, cloning and exercising high availabillity. In-class events already on the schedule include:  Location  Date  Delivery Language  Zagreb, Croatia  11 November 2013  Croatian  Prague, Czech Republic  21 October 2013  Czech  Ballerup, Denmark  26 August 2013  English  Bordeaux, France  18 September 2013  French  Paris, France  9 October 2013  French  Strasbourg, France  11 September 2013  French  Hamburg, Germany  30 Septemeber 2013  German  Munich, Germany  28 October 2013  German  Budapest, Hungary  9 September 2013  Hungarian  Riga, Latvia  30 September 2013  Latvian  Oslo, Norway  16 September 2013  English  Warsaw, Poland  28 October 2013  Polish  Bucharest, Romania  14 October 2013  English  Istanbul, Turkey  23 December 2013  Turkish  Indonesia, Jakarta  19 August 2013  English  Canberra, Australia  4 November 2013  English  Melbourne, Australia  6 November 2013  English  Sydney, Australia  25 November 2013  English  San Francisco, CA, United States  16 September 2013  English  Roseville, MN, United States  21 October 2013  English  St Louis, MO, United States  11 November 2013  English  Reston, VA, United States  31 July 2013  English  Buenos Aires, Argentina  21 August 2013  Spanish The Oracle VM Server for SPARC: Installation and Configuration course, in 2 days, teaches you about configuring control and service domains, creating guest domains, using virtual disks and networks, and migration. In-class events already on the schedule include:  Location  Date  Delivery Language  Budapest, Hungary  12 September 2013  Hungarian  Prague, Czech Republic  9 September 2013  Czech  Colombes, France  7 October 2013  French  Stuttgart, Germany  28 October 2013  German  Madrid, Spain  5 September 2013  Spanish  Istanbul, Turkey 30 September 2013  Turkish   Petaling Jaya, Malaysia 15 August 2013  English   Singapore 5 August 2013  English   Cnaberra, Australia  12 August 2013 English  Melbourne, Australia  30 October 2013 English  Sydney, Australia  26 August 2013 English To register for a course or to learn more about Oracle's virtualization curriculum, go to http://education.oracle.com/virtualization.

    Read the article

  • Update to Where&rsquo;s My Graphic Equalizer in Windows Media Player &ndash; now covers Windows 8

    - by Liam Westley
    Originally posted on: http://geekswithblogs.net/twickers/archive/2013/11/11/update-to-wherersquos-my-graphic-equalizer-in-windows-media-player.aspxHave you wondered where the graphics equaliser in the Windows 8 version of Windows Media Player has moved?  It’s certainly not on the menu option you’d think it is …. well, I’ve updated my Windows 7 post to include Windows 8, it’s over here http://geekswithblogs.net/twickers/archive/2009/10/23/135680.aspx.

    Read the article

  • Using extension methods to decrease the surface area of a C# interface

    - by brian_ritchie
    An interface defines a contract to be implemented by one or more classes.  One of the keys to a well-designed interface is defining a very specific range of functionality. The profile of the interface should be limited to a single purpose & should have the minimum methods required to implement this functionality.  Keeping the interface tight will keep those implementing the interface from getting lazy & not implementing it properly.  I've seen too many overly broad interfaces that aren't fully implemented by developers.  Instead, they just throw a NotImplementedException for the method they didn't implement. One way to help with this issue, is by using extension methods to move overloaded method definitions outside of the interface. Consider the following example: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: public interface IFileTransfer 2: { 3: void SendFile(Stream stream, Uri destination); 4: } 5:   6: public static class IFileTransferExtension 7: { 8: public static void SendFile(this IFileTransfer transfer, 9: string Filename, Uri destination) 10: { 11: using (var fs = File.OpenRead(Filename)) 12: { 13: transfer.SendFile(fs, destination); 14: } 15: } 16: } 17:   18: public static class TestIFileTransfer 19: { 20: static void Main() 21: { 22: IFileTransfer transfer = new FTPFileTransfer("user", "pass"); 23: transfer.SendFile(filename, new Uri("ftp://ftp.test.com")); 24: } 25: } In this example, you may have a number of overloads that uses different mechanisms for specifying the source file. The great part is, you don't need to implement these methods on each of your derived classes.  This gives you a better interface and better code reuse.

    Read the article

  • To Obtain EPOCH Time Value from a Packed BIT Structure in C [migrated]

    - by xde0037
    This is not a home assignment! We have a binary data file which has following data structure: (It is a 12 byte structure): I need to find out Epoch time value(total time value is packed in 42 bits as described below): Field-1 : Byte 1, Byte 2, + 6 Bits from Byte 3 Time-1 : 2 Bits from Byte 3 + Byte 4 Time-2 : Byte 5, Byte 6, Byte 7, Byte 8 Field-2 : Byte 9, Byte 10, Byte 11, Byte 12 For Field-1 and Field-2 I do not have issue as they can be taken out easily. I need time value in Epoch Time (long) as it has been packed in Bytes 5,6,7,8 and 3 and 4 as follows: (the bit structure for the time value is as follows): Bytes 5 to 8 (32 bit word) Packs time value bits from 0 thru 31 (byte 5 has 0 to 7 bits, byte 6 has 8 to 15, byte 7 has 16 to 23, byte 8 has 24 to 31). the remaining 10 bits of time value are packed in Bytes 3 and byte 4 as follows: byte 3 has 2 bits:32 and 33, and Byte 4 has remaining bits : 34 to 41. So total bits for time value is 42 bits, packed as above. I need to compute epoch value coming out of these 42 bits. How do I do it? I have done something like this but not sure it gives me correct value: typedef struct P_HEADER { unsigned int tmuNumber : 21; unsigned int time1 : 10; // Bits 6,7 from Byte-3 + 8 bits from Byte-4 unsigned int time2 : 32; // 32 bits: Bytes 5,6,7,8 unsigned int traceKey : 32; } __attribute__((__packed__)) P_HEADER; Then in the code : P_HEADER *header1; //get input string in hexa,etc..etc.. //parse the input with the header as : header1 = (P_HEADER *)inputBuf; // then print the header1->time1, header1->time2 .... long ttime = header1->time1|header1->time2; //?? is this the way to get values out? Any hint tip will be appreciated. Environment is : gcc 4.1, Linux Thanks in advance.

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >