Search Results

Search found 2457 results on 99 pages for 'bsd license'.

Page 85/99 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • My iPhone app runs fine in simulator but quit in device (iPod touch 3.1.2) test, I got the following

    - by Mickey Shine
    I was running myapp on an iPod touch and I noticed it missed some libraries. Is that the reason? [Session started at 2010-03-19 15:57:04 +0800.] GNU gdb 6.3.50-20050815 (Apple version gdb-1128) (Fri Dec 18 10:08:53 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys007 Loading program into debugger… Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-237-78 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… [Switching to thread 11779] [Switching to thread 11779] sharedlibrary apply-load-rules all (gdb) continue warning: Unable to read symbols for "/Library/MobileSubstrate/MobileSubstrate.dylib" (file not found). 2010-03-19 15:57:18.892 myapp[2338:207] MS:Notice: Installing: com.yourcompany.myapp [myapp] (478.52) 2010-03-19 15:57:19.145 myapp[2338:207] MS:Notice: Loading: /Library/MobileSubstrate/DynamicLibraries/Backgrounder.dylib warning: Unable to read symbols for "/Library/MobileSubstrate/DynamicLibraries/Backgrounder.dylib" (file not found). warning: Unable to read symbols for "/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.2.sdk/usr/lib/libsubstrate.dylib" (file not found). MS:Warning: message not found [myappAppDelegate applicationWillResignActive:] MS:Warning: message not found [myappAppDelegate applicationDidBecomeActive:] 2010-03-19 15:57:19.550 myapp[2338:207] in FirstViewController 2010-03-19 15:57:20.344 myapp[2338:207] in load table view 2010-03-19 15:57:20.478 myapp[2338:207] in loading splash view 2010-03-19 15:57:22.793 myapp[2338:207] in set interface Program received signal: “0”. warning: check_safe_call: could not restore current frame

    Read the article

  • .NET Development of iPhone App with MonoTouch - which development environment?

    - by Click Ahead
    Hi All, I'm a .NET developer (C#) with several years developing Windows Mobile Apps. I would like to get into developing iPhone Apps and MonoTouch looks good based on reviews I've read. So I'm going to go with MonoTouch. My understanding is that I'll need a new Mac, but as it happens I also need a new PC for my .NET windows development. My question is should I (a) Purchase a Mac Book Pro and dual boot with Windows 7 (b) Purchase a Mac Pro and dual boot with Windows 7 (c) Purchase a good Dev PC and a slighlty less well spec'd Mac Book Pro or Mac Pro Bear in mind I'm only doing MonoTouch development with the Mac, most of my development (approx. 80% initially) will be done on the Windows side. My budget is approx. €3,000 / $4,000 and I'd like a good, fast development environment.It's purely for development so on the windows side installing SQL 2008/VS 2010/Office and on the OS X side installing MonoTouch. BTW - my budget excludes licensing for VS/MonoTouch/etc, I have a MonoTouch and MSDN license. Any opinions are greatly appreciated. I'm a newbie to Mac's !

    Read the article

  • Agile Development

    - by James Oloo Onyango
    Alot of literature has and is being written about agile developement and its surrounding philosophies. In my quest to find the best way to express the importance of agile methodologies, i have found Robert C. Martin's "A Satire Of Two Companies" to be both the most concise and thorough! Enjoy the read! Rufus Inc Project Kick Off Your name is Bob. The date is January 3, 2001, and your head still aches from the recent millennial revelry. You are sitting in a conference room with several managers and a group of your peers. You are a project team leader. Your boss is there, and he has brought along all of his team leaders. His boss called the meeting. "We have a new project to develop," says your boss's boss. Call him BB. The points in his hair are so long that they scrape the ceiling. Your boss's points are just starting to grow, but he eagerly awaits the day when he can leave Brylcream stains on the acoustic tiles. BB describes the essence of the new market they have identified and the product they want to develop to exploit this market. "We must have this new project up and working by fourth quarter October 1," BB demands. "Nothing is of higher priority, so we are cancelling your current project." The reaction in the room is stunned silence. Months of work are simply going to be thrown away. Slowly, a murmur of objection begins to circulate around the conference table.   His points give off an evil green glow as BB meets the eyes of everyone in the room. One by one, that insidious stare reduces each attendee to quivering lumps of protoplasm. It is clear that he will brook no discussion on this matter. Once silence has been restored, BB says, "We need to begin immediately. How long will it take you to do the analysis?" You raise your hand. Your boss tries to stop you, but his spitwad misses you and you are unaware of his efforts.   "Sir, we can't tell you how long the analysis will take until we have some requirements." "The requirements document won't be ready for 3 or 4 weeks," BB says, his points vibrating with frustration. "So, pretend that you have the requirements in front of you now. How long will you require for analysis?" No one breathes. Everyone looks around to see whether anyone has some idea. "If analysis goes beyond April 1, we have a problem. Can you finish the analysis by then?" Your boss visibly gathers his courage: "We'll find a way, sir!" His points grow 3 mm, and your headache increases by two Tylenol. "Good." BB smiles. "Now, how long will it take to do the design?" "Sir," you say. Your boss visibly pales. He is clearly worried that his 3 mms are at risk. "Without an analysis, it will not be possible to tell you how long design will take." BB's expression shifts beyond austere.   "PRETEND you have the analysis already!" he says, while fixing you with his vacant, beady little eyes. "How long will it take you to do the design?" Two Tylenol are not going to cut it. Your boss, in a desperate attempt to save his new growth, babbles: "Well, sir, with only six months left to complete the project, design had better take no longer than 3 months."   "I'm glad you agree, Smithers!" BB says, beaming. Your boss relaxes. He knows his points are secure. After a while, he starts lightly humming the Brylcream jingle. BB continues, "So, analysis will be complete by April 1, design will be complete by July 1, and that gives you 3 months to implement the project. This meeting is an example of how well our new consensus and empowerment policies are working. Now, get out there and start working. I'll expect to see TQM plans and QIT assignments on my desk by next week. Oh, and don't forget that your crossfunctional team meetings and reports will be needed for next month's quality audit." "Forget the Tylenol," you think to yourself as you return to your cubicle. "I need bourbon."   Visibly excited, your boss comes over to you and says, "Gosh, what a great meeting. I think we're really going to do some world shaking with this project." You nod in agreement, too disgusted to do anything else. "Oh," your boss continues, "I almost forgot." He hands you a 30-page document. "Remember that the SEI is coming to do an evaluation next week. This is the evaluation guide. You need to read through it, memorize it, and then shred it. It tells you how to answer any questions that the SEI auditors ask you. It also tells you what parts of the building you are allowed to take them to and what parts to avoid. We are determined to be a CMM level 3 organization by June!"   You and your peers start working on the analysis of the new project. This is difficult because you have no requirements. But from the 10-minute introduction given by BB on that fateful morning, you have some idea of what the product is supposed to do.   Corporate process demands that you begin by creating a use case document. You and your team begin enumerating use cases and drawing oval and stick diagrams. Philosophical debates break out among the team members. There is disagreement as to whether certain use cases should be connected with <<extends>> or <<includes>> relationships. Competing models are created, but nobody knows how to evaluate them. The debate continues, effectively paralyzing progress.   After a week, somebody finds the iceberg.com Web site, which recommends disposing entirely of <<extends>> and <<includes>> and replacing them with <<precedes>> and <<uses>>. The documents on this Web site, authored by Don Sengroiux, describes a method known as stalwart-analysis, which claims to be a step-by-step method for translating use cases into design diagrams. More competing use case models are created using this new scheme, but again, people can't agree on how to evaluate them. The thrashing continues. More and more, the use case meetings are driven by emotion rather than by reason. If it weren't for the fact that you don't have requirements, you'd be pretty upset by the lack of progress you are making. The requirements document arrives on February 15. And then again on February 20, 25, and every week thereafter. Each new version contradicts the previous one. Clearly, the marketing folks who are writing the requirements, empowered though they might be, are not finding consensus.   At the same time, several new competing use case templates have been proposed by the various team members. Each template presents its own particularly creative way of delaying progress. The debates rage on. On March 1, Prudence Putrigence, the process proctor, succeeds in integrating all the competing use case forms and templates into a single, all-encompassing form. Just the blank form is 15 pages long. She has managed to include every field that appeared on all the competing templates. She also presents a 159- page document describing how to fill out the use case form. All current use cases must be rewritten according to the new standard.   You marvel to yourself that it now requires 15 pages of fill-in-the-blank and essay questions to answer the question: What should the system do when the user presses Return? The corporate process (authored by L. E. Ott, famed author of "Holistic Analysis: A Progressive Dialectic for Software Engineers") insists that you discover all primary use cases, 87 percent of all secondary use cases, and 36.274 percent of all tertiary use cases before you can complete analysis and enter the design phase. You have no idea what a tertiary use case is. So in an attempt to meet this requirement, you try to get your use case document reviewed by the marketing department, which you hope will know what a tertiary use case is.   Unfortunately, the marketing folks are too busy with sales support to talk to you. Indeed, since the project started, you have not been able to get a single meeting with marketing, which has provided a never-ending stream of changing and contradictory requirements documents.   While one team has been spinning endlessly on the use case document, another team has been working out the domain model. Endless variations of UML documents are pouring out of this team. Every week, the model is reworked.   The team members can't decide whether to use <<interfaces>> or <<types>> in the model. A huge disagreement has been raging on the proper syntax and application of OCL. Others on the team just got back from a 5-day class on catabolism, and have been producing incredibly detailed and arcane diagrams that nobody else can fathom.   On March 27, with one week to go before analysis is to be complete, you have produced a sea of documents and diagrams but are no closer to a cogent analysis of the problem than you were on January 3. **** And then, a miracle happens.   **** On Saturday, April 1, you check your e-mail from home. You see a memo from your boss to BB. It states unequivocally that you are done with the analysis! You phone your boss and complain. "How could you have told BB that we were done with the analysis?" "Have you looked at a calendar lately?" he responds. "It's April 1!" The irony of that date does not escape you. "But we have so much more to think about. So much more to analyze! We haven't even decided whether to use <<extends>> or <<precedes>>!" "Where is your evidence that you are not done?" inquires your boss, impatiently. "Whaaa . . . ." But he cuts you off. "Analysis can go on forever; it has to be stopped at some point. And since this is the date it was scheduled to stop, it has been stopped. Now, on Monday, I want you to gather up all existing analysis materials and put them into a public folder. Release that folder to Prudence so that she can log it in the CM system by Monday afternoon. Then get busy and start designing."   As you hang up the phone, you begin to consider the benefits of keeping a bottle of bourbon in your bottom desk drawer. They threw a party to celebrate the on-time completion of the analysis phase. BB gave a colon-stirring speech on empowerment. And your boss, another 3 mm taller, congratulated his team on the incredible show of unity and teamwork. Finally, the CIO takes the stage to tell everyone that the SEI audit went very well and to thank everyone for studying and shredding the evaluation guides that were passed out. Level 3 now seems assured and will be awarded by June. (Scuttlebutt has it that managers at the level of BB and above are to receive significant bonuses once the SEI awards level 3.)   As the weeks flow by, you and your team work on the design of the system. Of course, you find that the analysis that the design is supposedly based on is flawedno, useless; no, worse than useless. But when you tell your boss that you need to go back and work some more on the analysis to shore up its weaker sections, he simply states, "The analysis phase is over. The only allowable activity is design. Now get back to it."   So, you and your team hack the design as best you can, unsure of whether the requirements have been properly analyzed. Of course, it really doesn't matter much, since the requirements document is still thrashing with weekly revisions, and the marketing department still refuses to meet with you.     The design is a nightmare. Your boss recently misread a book named The Finish Line in which the author, Mark DeThomaso, blithely suggested that design documents should be taken down to code-level detail. "If we are going to be working at that level of detail," you ask, "why don't we simply write the code instead?" "Because then you wouldn't be designing, of course. And the only allowable activity in the design phase is design!" "Besides," he continues, "we have just purchased a companywide license for Dandelion! This tool enables 'Round the Horn Engineering!' You are to transfer all design diagrams into this tool. It will automatically generate our code for us! It will also keep the design diagrams in sync with the code!" Your boss hands you a brightly colored shrinkwrapped box containing the Dandelion distribution. You accept it numbly and shuffle off to your cubicle. Twelve hours, eight crashes, one disk reformatting, and eight shots of 151 later, you finally have the tool installed on your server. You consider the week your team will lose while attending Dandelion training. Then you smile and think, "Any week I'm not here is a good week." Design diagram after design diagram is created by your team. Dandelion makes it very difficult to draw these diagrams. There are dozens and dozens of deeply nested dialog boxes with funny text fields and check boxes that must all be filled in correctly. And then there's the problem of moving classes between packages. At first, these diagram are driven from the use cases. But the requirements are changing so often that the use cases rapidly become meaningless. Debates rage about whether VISITOR or DECORATOR design patterns should be used. One developer refuses to use VISITOR in any form, claiming that it's not a properly object-oriented construct. Someone refuses to use multiple inheritance, since it is the spawn of the devil. Review meetings rapidly degenerate into debates about the meaning of object orientation, the definition of analysis versus design, or when to use aggregation versus association. Midway through the design cycle, the marketing folks announce that they have rethought the focus of the system. Their new requirements document is completely restructured. They have eliminated several major feature areas and replaced them with feature areas that they anticipate customer surveys will show to be more appropriate. You tell your boss that these changes mean that you need to reanalyze and redesign much of the system. But he says, "The analysis phase is system. But he says, "The analysis phase is over. The only allowable activity is design. Now get back to it."   You suggest that it might be better to create a simple prototype to show to the marketing folks and even some potential customers. But your boss says, "The analysis phase is over. The only allowable activity is design. Now get back to it." Hack, hack, hack, hack. You try to create some kind of a design document that might reflect the new requirements documents. However, the revolution of the requirements has not caused them to stop thrashing. Indeed, if anything, the wild oscillations of the requirements document have only increased in frequency and amplitude.   You slog your way through them.   On June 15, the Dandelion database gets corrupted. Apparently, the corruption has been progressive. Small errors in the DB accumulated over the months into bigger and bigger errors. Eventually, the CASE tool just stopped working. Of course, the slowly encroaching corruption is present on all the backups. Calls to the Dandelion technical support line go unanswered for several days. Finally, you receive a brief e-mail from Dandelion, informing you that this is a known problem and that the solution is to purchase the new version, which they promise will be ready some time next quarter, and then reenter all the diagrams by hand.   ****   Then, on July 1 another miracle happens! You are done with the design!   Rather than go to your boss and complain, you stock your middle desk drawer with some vodka.   **** They threw a party to celebrate the on-time completion of the design phase and their graduation to CMM level 3. This time, you find BB's speech so stirring that you have to use the restroom before it begins. New banners and plaques are all over your workplace. They show pictures of eagles and mountain climbers, and they talk about teamwork and empowerment. They read better after a few scotches. That reminds you that you need to clear out your file cabinet to make room for the brandy. You and your team begin to code. But you rapidly discover that the design is lacking in some significant areas. Actually, it's lacking any significance at all. You convene a design session in one of the conference rooms to try to work through some of the nastier problems. But your boss catches you at it and disbands the meeting, saying, "The design phase is over. The only allowable activity is coding. Now get back to it."   ****   The code generated by Dandelion is really hideous. It turns out that you and your team were using association and aggregation the wrong way, after all. All the generated code has to be edited to correct these flaws. Editing this code is extremely difficult because it has been instrumented with ugly comment blocks that have special syntax that Dandelion needs in order to keep the diagrams in sync with the code. If you accidentally alter one of these comments, the diagrams will be regenerated incorrectly. It turns out that "Round the Horn Engineering" requires an awful lot of effort. The more you try to keep the code compatible with Dandelion, the more errors Dandelion generates. In the end, you give up and decide to keep the diagrams up to date manually. A second later, you decide that there's no point in keeping the diagrams up to date at all. Besides, who has time?   Your boss hires a consultant to build tools to count the number of lines of code that are being produced. He puts a big thermometer graph on the wall with the number 1,000,000 on the top. Every day, he extends the red line to show how many lines have been added. Three days after the thermometer appears on the wall, your boss stops you in the hall. "That graph isn't growing quickly enough. We need to have a million lines done by October 1." "We aren't even sh-sh-sure that the proshect will require a m-million linezh," you blather. "We have to have a million lines done by October 1," your boss reiterates. His points have grown again, and the Grecian formula he uses on them creates an aura of authority and competence. "Are you sure your comment blocks are big enough?" Then, in a flash of managerial insight, he says, "I have it! I want you to institute a new policy among the engineers. No line of code is to be longer than 20 characters. Any such line must be split into two or more preferably more. All existing code needs to be reworked to this standard. That'll get our line count up!"   You decide not to tell him that this will require two unscheduled work months. You decide not to tell him anything at all. You decide that intravenous injections of pure ethanol are the only solution. You make the appropriate arrangements. Hack, hack, hack, and hack. You and your team madly code away. By August 1, your boss, frowning at the thermometer on the wall, institutes a mandatory 50-hour workweek.   Hack, hack, hack, and hack. By September 1st, the thermometer is at 1.2 million lines and your boss asks you to write a report describing why you exceeded the coding budget by 20 percent. He institutes mandatory Saturdays and demands that the project be brought back down to a million lines. You start a campaign of remerging lines. Hack, hack, hack, and hack. Tempers are flaring; people are quitting; QA is raining trouble reports down on you. Customers are demanding installation and user manuals; salespeople are demanding advance demonstrations for special customers; the requirements document is still thrashing, the marketing folks are complaining that the product isn't anything like they specified, and the liquor store won't accept your credit card anymore. Something has to give.    On September 15, BB calls a meeting. As he enters the room, his points are emitting clouds of steam. When he speaks, the bass overtones of his carefully manicured voice cause the pit of your stomach to roll over. "The QA manager has told me that this project has less than 50 percent of the required features implemented. He has also informed me that the system crashes all the time, yields wrong results, and is hideously slow. He has also complained that he cannot keep up with the continuous train of daily releases, each more buggy than the last!" He stops for a few seconds, visibly trying to compose himself. "The QA manager estimates that, at this rate of development, we won't be able to ship the product until December!" Actually, you think it's more like March, but you don't say anything. "December!" BB roars with such derision that people duck their heads as though he were pointing an assault rifle at them. "December is absolutely out of the question. Team leaders, I want new estimates on my desk in the morning. I am hereby mandating 65-hour work weeks until this project is complete. And it better be complete by November 1."   As he leaves the conference room, he is heard to mutter: "Empowermentbah!" * * * Your boss is bald; his points are mounted on BB's wall. The fluorescent lights reflecting off his pate momentarily dazzle you. "Do you have anything to drink?" he asks. Having just finished your last bottle of Boone's Farm, you pull a bottle of Thunderbird from your bookshelf and pour it into his coffee mug. "What's it going to take to get this project done? " he asks. "We need to freeze the requirements, analyze them, design them, and then implement them," you say callously. "By November 1?" your boss exclaims incredulously. "No way! Just get back to coding the damned thing." He storms out, scratching his vacant head.   A few days later, you find that your boss has been transferred to the corporate research division. Turnover has skyrocketed. Customers, informed at the last minute that their orders cannot be fulfilled on time, have begun to cancel their orders. Marketing is re-evaluating whether this product aligns with the overall goals of the company. Memos fly, heads roll, policies change, and things are, overall, pretty grim. Finally, by March, after far too many sixty-five hour weeks, a very shaky version of the software is ready. In the field, bug-discovery rates are high, and the technical support staff are at their wits' end, trying to cope with the complaints and demands of the irate customers. Nobody is happy.   In April, BB decides to buy his way out of the problem by licensing a product produced by Rupert Industries and redistributing it. The customers are mollified, the marketing folks are smug, and you are laid off.     Rupert Industries: Project Alpha   Your name is Robert. The date is January 3, 2001. The quiet hours spent with your family this holiday have left you refreshed and ready for work. You are sitting in a conference room with your team of professionals. The manager of the division called the meeting. "We have some ideas for a new project," says the division manager. Call him Russ. He is a high-strung British chap with more energy than a fusion reactor. He is ambitious and driven but understands the value of a team. Russ describes the essence of the new market opportunity the company has identified and introduces you to Jane, the marketing manager, who is responsible for defining the products that will address it. Addressing you, Jane says, "We'd like to start defining our first product offering as soon as possible. When can you and your team meet with me?" You reply, "We'll be done with the current iteration of our project this Friday. We can spare a few hours for you between now and then. After that, we'll take a few people from the team and dedicate them to you. We'll begin hiring their replacements and the new people for your team immediately." "Great," says Russ, "but I want you to understand that it is critical that we have something to exhibit at the trade show coming up this July. If we can't be there with something significant, we'll lose the opportunity."   "I understand," you reply. "I don't yet know what it is that you have in mind, but I'm sure we can have something by July. I just can't tell you what that something will be right now. In any case, you and Jane are going to have complete control over what we developers do, so you can rest assured that by July, you'll have the most important things that can be accomplished in that time ready to exhibit."   Russ nods in satisfaction. He knows how this works. Your team has always kept him advised and allowed him to steer their development. He has the utmost confidence that your team will work on the most important things first and will produce a high-quality product.   * * *   "So, Robert," says Jane at their first meeting, "How does your team feel about being split up?" "We'll miss working with each other," you answer, "but some of us were getting pretty tired of that last project and are looking forward to a change. So, what are you people cooking up?" Jane beams. "You know how much trouble our customers currently have . . ." And she spends a half hour or so describing the problem and possible solution. "OK, wait a second" you respond. "I need to be clear about this." And so you and Jane talk about how this system might work. Some of her ideas aren't fully formed. You suggest possible solutions. She likes some of them. You continue discussing.   During the discussion, as each new topic is addressed, Jane writes user story cards. Each card represents something that the new system has to do. The cards accumulate on the table and are spread out in front of you. Both you and Jane point at them, pick them up, and make notes on them as you discuss the stories. The cards are powerful mnemonic devices that you can use to represent complex ideas that are barely formed.   At the end of the meeting, you say, "OK, I've got a general idea of what you want. I'm going to talk to the team about it. I imagine they'll want to run some experiments with various database structures and presentation formats. Next time we meet, it'll be as a group, and we'll start identifying the most important features of the system."   A week later, your nascent team meets with Jane. They spread the existing user story cards out on the table and begin to get into some of the details of the system. The meeting is very dynamic. Jane presents the stories in the order of their importance. There is much discussion about each one. The developers are concerned about keeping the stories small enough to estimate and test. So they continually ask Jane to split one story into several smaller stories. Jane is concerned that each story have a clear business value and priority, so as she splits them, she makes sure that this stays true.   The stories accumulate on the table. Jane writes them, but the developers make notes on them as needed. Nobody tries to capture everything that is said; the cards are not meant to capture everything but are simply reminders of the conversation.   As the developers become more comfortable with the stories, they begin writing estimates on them. These estimates are crude and budgetary, but they give Jane an idea of what the story will cost.   At the end of the meeting, it is clear that many more stories could be discussed. It is also clear that the most important stories have been addressed and that they represent several months worth of work. Jane closes the meeting by taking the cards with her and promising to have a proposal for the first release in the morning.   * * *   The next morning, you reconvene the meeting. Jane chooses five cards and places them on the table. "According to your estimates, these cards represent about one perfect team-week's worth of work. The last iteration of the previous project managed to get one perfect team-week done in 3 real weeks. If we can get these five stories done in 3 weeks, we'll be able to demonstrate them to Russ. That will make him feel very comfortable about our progress." Jane is pushing it. The sheepish look on her face lets you know that she knows it too. You reply, "Jane, this is a new team, working on a new project. It's a bit presumptuous to expect that our velocity will be the same as the previous team's. However, I met with the team yesterday afternoon, and we all agreed that our initial velocity should, in fact, be set to one perfectweek for every 3 real-weeks. So you've lucked out on this one." "Just remember," you continue, "that the story estimates and the story velocity are very tentative at this point. We'll learn more when we plan the iteration and even more when we implement it."   Jane looks over her glasses at you as if to say "Who's the boss around here, anyway?" and then smiles and says, "Yeah, don't worry. I know the drill by now."Jane then puts 15 more cards on the table. She says, "If we can get all these cards done by the end of March, we can turn the system over to our beta test customers. And we'll get good feedback from them."   You reply, "OK, so we've got our first iteration defined, and we have the stories for the next three iterations after that. These four iterations will make our first release."   "So," says Jane, can you really do these five stories in the next 3 weeks?" "I don't know for sure, Jane," you reply. "Let's break them down into tasks and see what we get."   So Jane, you, and your team spend the next several hours taking each of the five stories that Jane chose for the first iteration and breaking them down into small tasks. The developers quickly realize that some of the tasks can be shared between stories and that other tasks have commonalities that can probably be taken advantage of. It is clear that potential designs are popping into the developers' heads. From time to time, they form little discussion knots and scribble UML diagrams on some cards.   Soon, the whiteboard is filled with the tasks that, once completed, will implement the five stories for this iteration. You start the sign-up process by saying, "OK, let's sign up for these tasks." "I'll take the initial database generation." Says Pete. "That's what I did on the last project, and this doesn't look very different. I estimate it at two of my perfect workdays." "OK, well, then, I'll take the login screen," says Joe. "Aw, darn," says Elaine, the junior member of the team, "I've never done a GUI, and kinda wanted to try that one."   "Ah, the impatience of youth," Joe says sagely, with a wink in your direction. "You can assist me with it, young Jedi." To Jane: "I think it'll take me about three of my perfect workdays."   One by one, the developers sign up for tasks and estimate them in terms of their own perfect workdays. Both you and Jane know that it is best to let the developers volunteer for tasks than to assign the tasks to them. You also know full well that you daren't challenge any of the developers' estimates. You know these people, and you trust them. You know that they are going to do the very best they can.   The developers know that they can't sign up for more perfect workdays than they finished in the last iteration they worked on. Once each developer has filled his or her schedule for the iteration, they stop signing up for tasks.   Eventually, all the developers have stopped signing up for tasks. But, of course, tasks are still left on the board.   "I was worried that that might happen," you say, "OK, there's only one thing to do, Jane. We've got too much to do in this iteration. What stories or tasks can we remove?" Jane sighs. She knows that this is the only option. Working overtime at the beginning of a project is insane, and projects where she's tried it have not fared well.   So Jane starts to remove the least-important functionality. "Well, we really don't need the login screen just yet. We can simply start the system in the logged-in state." "Rats!" cries Elaine. "I really wanted to do that." "Patience, grasshopper." says Joe. "Those who wait for the bees to leave the hive will not have lips too swollen to relish the honey." Elaine looks confused. Everyone looks confused. "So . . .," Jane continues, "I think we can also do away with . . ." And so, bit by bit, the list of tasks shrinks. Developers who lose a task sign up for one of the remaining ones.   The negotiation is not painless. Several times, Jane exhibits obvious frustration and impatience. Once, when tensions are especially high, Elaine volunteers, "I'll work extra hard to make up some of the missing time." You are about to correct her when, fortunately, Joe looks her in the eye and says, "When once you proceed down the dark path, forever will it dominate your destiny."   In the end, an iteration acceptable to Jane is reached. It's not what Jane wanted. Indeed, it is significantly less. But it's something the team feels that can be achieved in the next 3 weeks.   And, after all, it still addresses the most important things that Jane wanted in the iteration. "So, Jane," you say when things had quieted down a bit, "when can we expect acceptance tests from you?" Jane sighs. This is the other side of the coin. For every story the development team implements,   Jane must supply a suite of acceptance tests that prove that it works. And the team needs these long before the end of the iteration, since they will certainly point out differences in the way Jane and the developers imagine the system's behaviour.   "I'll get you some example test scripts today," Jane promises. "I'll add to them every day after that. You'll have the entire suite by the middle of the iteration."   * * *   The iteration begins on Monday morning with a flurry of Class, Responsibilities, Collaborators sessions. By midmorning, all the developers have assembled into pairs and are rapidly coding away. "And now, my young apprentice," Joe says to Elaine, "you shall learn the mysteries of test-first design!"   "Wow, that sounds pretty rad," Elaine replies. "How do you do it?" Joe beams. It's clear that he has been anticipating this moment. "OK, what does the code do right now?" "Huh?" replied Elaine, "It doesn't do anything at all; there is no code."   "So, consider our task; can you think of something the code should do?" "Sure," Elaine said with youthful assurance, "First, it should connect to the database." "And thereupon, what must needs be required to connecteth the database?" "You sure talk weird," laughed Elaine. "I think we'd have to get the database object from some registry and call the Connect() method. "Ah, astute young wizard. Thou perceives correctly that we requireth an object within which we can cacheth the database object." "Is 'cacheth' really a word?" "It is when I say it! So, what test can we write that we know the database registry should pass?" Elaine sighs. She knows she'll just have to play along. "We should be able to create a database object and pass it to the registry in a Store() method. And then we should be able to pull it out of the registry with a Get() method and make sure it's the same object." "Oh, well said, my prepubescent sprite!" "Hay!" "So, now, let's write a test function that proves your case." "But shouldn't we write the database object and registry object first?" "Ah, you've much to learn, my young impatient one. Just write the test first." "But it won't even compile!" "Are you sure? What if it did?" "Uh . . ." "Just write the test, Elaine. Trust me." And so Joe, Elaine, and all the other developers began to code their tasks, one test case at a time. The room in which they worked was abuzz with the conversations between the pairs. The murmur was punctuated by an occasional high five when a pair managed to finish a task or a difficult test case.   As development proceeded, the developers changed partners once or twice a day. Each developer got to see what all the others were doing, and so knowledge of the code spread generally throughout the team.   Whenever a pair finished something significant whether a whole task or simply an important part of a task they integrated what they had with the rest of the system. Thus, the code base grew daily, and integration difficulties were minimized.   The developers communicated with Jane on a daily basis. They'd go to her whenever they had a question about the functionality of the system or the interpretation of an acceptance test case.   Jane, good as her word, supplied the team with a steady stream of acceptance test scripts. The team read these carefully and thereby gained a much better understanding of what Jane expected the system to do. By the beginning of the second week, there was enough functionality to demonstrate to Jane. She watched eagerly as the demonstration passed test case after test case. "This is really cool," Jane said as the demonstration finally ended. "But this doesn't seem like one-third of the tasks. Is your velocity slower than anticipated?"   You grimace. You'd been waiting for a good time to mention this to Jane but now she was forcing the issue. "Yes, unfortunately, we are going more slowly than we had expected. The new application server we are using is turning out to be a pain to configure. Also, it takes forever to reboot, and we have to reboot it whenever we make even the slightest change to its configuration."   Jane eyes you with suspicion. The stress of last Monday's negotiations had still not entirely dissipated. She says, "And what does this mean to our schedule? We can't slip it again, we just can't. Russ will have a fit! He'll haul us all into the woodshed and ream us some new ones."   You look Jane right in the eyes. There's no pleasant way to give someone news like this. So you just blurt out, "Look, if things keep going like they're going, we're not going to be done with everything by next Friday. Now it's possible that we'll figure out a way to go faster. But, frankly, I wouldn't depend on that. You should start thinking about one or two tasks that could be removed from the iteration without ruining the demonstration for Russ. Come hell or high water, we are going to give that demonstration on Friday, and I don't think you want us to choose which tasks to omit."   "Aw forchrisakes!" Jane barely manages to stifle yelling that last word as she stalks away, shaking her head. Not for the first time, you say to yourself, "Nobody ever promised me project management would be easy." You are pretty sure it won't be the last time, either.   Actually, things went a bit better than you had hoped. The team did, in fact, have to drop one task from the iteration, but Jane had chosen wisely, and the demonstration for Russ went without a hitch. Russ was not impressed with the progress, but neither was he dismayed. He simply said, "This is pretty good. But remember, we have to be able to demonstrate this system at the trade show in July, and at this rate, it doesn't look like you'll have all that much to show." Jane, whose attitude had improved dramatically with the completion of the iteration, responded to Russ by saying, "Russ, this team is working hard, and well. When July comes around, I am confident that we'll have something significant to demonstrate. It won't be everything, and some of it may be smoke and mirrors, but we'll have something."   Painful though the last iteration was, it had calibrated your velocity numbers. The next iteration went much better. Not because your team got more done than in the last iteration but simply because the team didn't have to remove any tasks or stories in the middle of the iteration.   By the start of the fourth iteration, a natural rhythm has been established. Jane, you, and the team know exactly what to expect from one another. The team is running hard, but the pace is sustainable. You are confident that the team can keep up this pace for a year or more.   The number of surprises in the schedule diminishes to near zero; however, the number of surprises in the requirements does not. Jane and Russ frequently look over the growing system and make recommendations or changes to the existing functionality. But all parties realize that these changes take time and must be scheduled. So the changes do not cause anyone's expectations to be violated. In March, there is a major demonstration of the system to the board of directors. The system is very limited and is not yet in a form good enough to take to the trade show, but progress is steady, and the board is reasonably impressed.   The second release goes even more smoothly than the first. By now, the team has figured out a way to automate Jane's acceptance test scripts. The team has also refactored the design of the system to the point that it is really easy to add new features and change old ones. The second release was done by the end of June and was taken to the trade show. It had less in it than Jane and Russ would have liked, but it did demonstrate the most important features of the system. Although customers at the trade show noticed that certain features were missing, they were very impressed overall. You, Russ, and Jane all returned from the trade show with smiles on your faces. You all felt as though this project was a winner.   Indeed, many months later, you are contacted by Rufus Inc. That company had been working on a system like this for its internal operations. Rufus has canceled the development of that system after a death-march project and is negotiating to license your technology for its environment.   Indeed, things are looking up!

    Read the article

  • Introducing… SharePress!

    - by Bil Simser
    For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

    Read the article

  • CodePlex Daily Summary for Wednesday, June 09, 2010

    CodePlex Daily Summary for Wednesday, June 09, 2010New Projects.NET Transactional File Manager: Transactional File Manager is a .NET API that supports including file system operations such as file copy, move, delete in a transaction. It's an i...3D World Studio Content Pipeline for Windows Phone 7: This is a port of PhotonicGames' project: http://xna3dws.codeplex.com/releases/view/42994 for the Windows Phone 7 tools (XNA 4.0 CTP).Advanced Script Editor for 3D Rad: Advanced Script Editor makes it easier for 3D Rad coders to write scripts. Developed in C#, it features a functions list, a favourites list, object...Ajax ASP.Net Forum: A fast & lightweight open source free forum developed in ASP.Net 3.5, AJAX, CSS, SQL & Javascript Cache (filter-sort-move through table records at ...Axon: Axon is the home automation system that I will be running in my home. It will be a collection of different technologies and projects, often experim...BigBallz: Projeto de site de Bolões para campeonatos diversos. A princípio pensado para copa do mundo de futebol de 2010BigfootMVC: MVC Framework for DotNetNukeBigfootSQL: A StringBuilder for SQL. BigfootSQL was built with simplicity in mind. It assumes that you are comfortable writing SQL but dislike effort required ...Bxf (Basic XAML Framework): Basic Xaml Framework (Bxf) is a simple, streamlined set of UI components designed to demonstrate the minimum framework functionality required to ma...elZerf - elektronische Zeiterfassung: elektronisches Zeiterfassungsystem im Rahmen der Seminararbeit im Modul Web-Anwendungsprogrammierung.IntoFactories.Net - Samples: Project to host samples created by members of the IntoFactories.NET Team blog.Lanchonete: Sistema para controle de lanchonetes. Medieval Dynasties: Medieval Dynasties is a game written in C# 3.5 and XNA 3.1 at the moment. It is inspired by Crusader Kings, Total War and Civilization.PMMsg: A project to replace the standard messaging client on the Windows Mobile platform. Mainly geared towards Windows Mobile 6.5.3 VGA devices. Also an...PunkPong: PunkPong is an open source "Pong" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard or mouse. This cross-platform a...Renegade Legion Fighter Calculator: In working on assigning fighters to squadrons, flights, and groups for a campaign, I was struck by the sheer amount of calculations I had to make. ...Sharpotify - Spotify .Net Library: Sharpotify is a Spotify library in C#. It is based in Jotify and SharPot projects. It is not a libspotify wrapper, It is a full .Net Spotify protoc...Silverlight load on demand with MEF: With MEF, a Silverlight control can be split in several packages(xap files). Each package can contain one or more pages and it will download on dem...SOLID by example: Source code examples to undestood solid design principles. Most of them were taken from http://www.lostechies.com/SQL Server 2008 Reporting Services RS.EXE Supporting Forms Authentication: A version of RS.EXE that you can use with Forms Authentication in Native Mode. Use the following arguments to specify credentials (just like Basic ...Stripper: Stripper Remove Diacritics and other unwanted caracter to fabric a more standardized file naming.study: studyUncoverPIC: UncoverPIC is a Silverlight Game strongly inspired to the famous Arcade Game "GalsPanic" (see http://en.wikipedia.org/wiki/Gals_Panic ). It was dev...Unity3D Untitled MMO: Unity3D Untitled MMO FrameworkUnnamedShop: UnnamedShopXBStudio.asp.net.automation: A Unit Testing Automation library for asp.netXBStudio.Web: XBStudio Web ApplicationNew Releases3D World Studio Content Pipeline for Windows Phone 7: Initial Release (0.1): This is the first release of the project, with plenty of hackery and kludges to go around, but it mostly works! Let me know if you hit any bugs.Acies: Acies - Alpha Build 0.0.10: Alpha release. Requires Microsoft XNA Framework Redistributable 3.1 (http://www.microsoft.com/downloads/details.aspx?FamilyID=53867a2a-e249-4560-...Advanced Script Editor for 3D Rad: Advanced Script Editor - Version 2.6: Despite various previous releases on the 3D Rad forum, this is the first release on CodePlex.Ajax ASP.Net Forum: First Release: First Release prior to CodePlex Publish (send to admins)So, it doesn't all finish VERSION: 0.1.2 FEATURES Main Home Where all the Forums (called ...Artist Follower for Microsoft Access: Artist Follower 0.5.1: Artists Follower changes: Just one form to manage artists and links!!!Artist Follower for Microsoft Access: Artists Follower 0.5.0: This is the first release of Artist Follower.ASP.NET MVC SiteMap provider - MvcSiteMapProvider: MvcSiteMapProvider 2.0.0 CTP1: This is a community technology preview of MvcSiteMapProvider version 2.0. It is not backwards compatible with older MvcSiteMapProvider versions. ...B&W Port Scanner: Black`n`White Port Scanner 4.0: Version 4 includes: - Improved vulnerability detection tools - Report Creation - Improved Stability - Much better port information database - Nume...BaseCalendar: BaseControls 1.1: BaseControls 1.1 contains the BaseCalendar ASP.NET control. Changes: Rendering TH by default inside THEAD. Added option (ShowMinNumWeeks) to r...BigfootSQL: BigfootSQL Source Code: BigfootSQL C# Version 01Commerce Server 2009 Orders using Pipelines in a Console Application: ConsoleApplication To PLace Orders: ConsoleApplication To PLace Orders with Commerce Server 2009 foundationCommunity Forums NNTP bridge: Community Forums NNTP Bridge V33: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Community Forums NNTP bridge: Community Forums NNTP Bridge V34: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...ContainerOne - C# application server: V0.1.2.0: New minor release containing: Integration test component for runtime testing Refactored and cleaned solution files First unit testsExtend SmallBasic: Teaching Extensions v.020: Moved Tortoise.approve to ProgramWindow.TakeScreenShot()fleet It: v0.06 Alpha: v0.06 Alpha - Features Caching implemented for fleets Various Bug fixes Implemented Settings. Resolved logical issue with Getting fleets U...Frotz.NET: Frotz.NET B2: In addition to B1 changes: - Added ZTools to enable debugging view of zcode files - Added rudimentary scroll back buffer. B1 Changes: - Got Adapt...FsObserver: FsObserver 2.0: This is basically the same as FsObserver 1.0 but the "-help" documentation has been cleaned up somewhat and the code has been refactored so that it...GPdotNET - Genetic Programming Tool: GPdotNETv1.0: GPdotNET v.1.0 - more details on http.bhrnjica.wordpress.com/gpdotnetHERB.IQ: Alpha 0.1 Source code release 8: Alpha 0.1 Source code release 8imdb movie downloader: myImdb 0.9.3: myImdb 0.9.3imdb movie downloader: myImdb 0.9.4: myImdb 0.9.4jccc .NET smart framework: jccc .NET smart framework version 1.2010.06.07: jccc .NET smart framework version 1.2010.06.07 added oracle databases supportLongBar: LongBar 2.1 Build 313: - Fixed library and updates to work with updated live services - Options: You can disable shadow nowMDownloader: MDownloader-0.15.17.59623: Fixed FileFactory provider. Improvied postpone policies. Added network request limiter.MediaCoder.NET: MediaCoder.NET v1.0 beta 1.1: Installer for MediaCoder.NET v1.0 beta1.1. It can now convert files with spaces in the path or filename. I have also created filter for the SaveFil...MediaCoder.NET: MediaCoder.NET v1.0 beta 1.1 Source Code: Source Code for MediaCoder.NET v1.0 beta 1.1.mesoBoard: mesoBoard - 0.9.1 beta: Fixed file download permissions Released under the New BSD License.MPCLI: Alpha Release (0.1.0.0): This release has core functionality and is considered a potential candidate for a feature complete release of this library. However, suggestions fo...N2 CMS: 2.0: N2 is a lightweight CMS framework for ASP.NET. It helps professional developers build great web sites that anyone can update. Major Changes (1.5 -...NHTrace: NHTrace-47571: NHTrace-47571NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Class Libraries, version 1.0.1.125: The NodeXL class libraries can be used to display network graphs in .NET applications. To include a NodeXL network graph in a WPF desktop or Windo...NSoup: NSoup 0.2: NSoup 0.2 corresponds to jsoup version 1.1.1. List of changes can be viewed here.Opalis Community Releases: Integration Pack for Data Manipulation: The Integration Pack for Data Manipulation enables you to perform a wider variety of data manipulation tasks as well as aggregate data into common ...Performance Analysis of Logs (PAL) Tool: PAL v2.0 Beta 1: Fixed Counter Sorting: Fixed a minor bug where duplicate counter expression paths were not being removed. Analysis Added: Added LogicalDisk Read/...RoTwee: RoTwee (12.0.0.0): Trial version. 17925 Make it possible to change window sizeSharpotify - Spotify .Net Library: Sharpotify.Library 1.0: Sharpotify Library: Stable release. You can connect with spotify, search, browse (tracks, albums, artists), get a music stream, create and edit you...Silverlight load on demand with MEF: mal.Web.Silverlight.MEF 1.0.0.0: mal.Web.Silverlight.MEF 1.0.0.0sMAPtool: sMAPtool v0.7e (without Maps): + Added: color value expansion bar for hmap (right click to select color scheme) + Added: more complex hmap editing, uses now 4 point bounding rect...SQL Server 2008 Reporting Services RS.EXE Supporting Forms Authentication: Initial release: Enjoy!Stripper: Stripper 0.1.1 (CLi): Stripper Remove Diacritics and other unwanted caracters to fabric a more standardized file naming. Especially French caracter and maybe other lang...Unity3D Untitled MMO: v1: versionUrzaGatherer: UrzaGatherer 2.01a: New version with some minors bugs corrected.VCC: Latest build, v2.1.30608.0: Automatic drop of latest buildVCC: Latest build, v2.1.30608.1: Automatic drop of latest buildWatermarker.NET: 0.1.3811: A newer version with some improvements. I release this as a .zip archive, because settings are added here, so there will be .exe and .config files.Yet Another GPS: Alfa Release: Alfa working releaseMost Popular ProjectsDozer Enterprise Library for .NETEmployee Management SystemWiiMote PhysicsVisualStudio 2010 JavaScript OutliningSpider CompilerConcurrent CacheOil Slick Live FeedsCSUFVGDC Summer JamWinGetSiteMap Utility for DNN Blog ModuleMost Active ProjectsCommunity Forums NNTP bridgepatterns & practices – Enterprise LibraryRhyduino - Arduino and Managed CodejQuery Library for SharePoint Web ServicesRawrNB_Store - Free DotNetNuke Ecommerce Catalog ModuleAndrew's XNA HelpersBlogEngine.NETStyleCopCustomer Portal Accelerator for Microsoft Dynamics CRM

    Read the article

  • Can I delete libc-bin?

    - by Balazs Szikszay
    Question is simple, I need to know because I cant upgrade/install anything, because it always says I have to uninstall/delete it to continue. It also says dont do it, if I dont know what I am doing. EDIT: szikszay@szikszay-Latitude-E5530-non-vPro:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. ia32-libs-multiarch:i386 : Depends: libqtcore4:i386 but it is not installed Depends: libqtgui4:i386 but it is not installed Depends: libqt4-dbus:i386 but it is not installed Depends: libqt4-network:i386 but it is not installed Depends: libqt4-opengl:i386 but it is not installed Depends: libqt4-qt3support:i386 but it is not installed Depends: libqt4-script:i386 but it is not installed Depends: libqt4-scripttools:i386 but it is not installed Depends: libqt4-sql:i386 but it is not installed Depends: libqt4-svg:i386 but it is not installed Depends: libqt4-test:i386 but it is not installed Depends: libqt4-xml:i386 but it is not installed Depends: libqt4-xmlpatterns:i386 but it is not installed Depends: libcups2:i386 but it is not installed Depends: libcupsimage2:i386 but it is not installed Depends: libcurl3:i386 but it is not installed Depends: libnss3:i386 but it is not installed Depends: libnspr4:i386 but it is not installed Depends: libssl1.0.0:i386 but it is not installed Recommends: libgl1-mesa-glx:i386 but it is not installed Recommends: libgl1-mesa-dri:i386 but it is not installed lib32ffi6 : Depends: libc6-i386 (= 2.4) but it is not installed lib32gcc1 : Depends: libc6-i386 (= 2.5) but it is not installed lib32nss-mdns : Depends: libc6-i386 (= 2.4) but it is not installed lib32stdc++6 : Depends: libc6-i386 (= 2.4) but it is not installed lib32z1 : Depends: libc6-i386 (= 2.4) but it is not installed libacl1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libattr1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libaudio2:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libavahi-client3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed Depends: libdbus-1-3:i386 (= 1.1.1) but it is not installed libavahi-common3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libcomerr2:i386 : Depends: libc6:i386 (= 2.12) but it is not installed libdb5.1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libdrm-intel1:i386 : Depends: libc6:i386 (= 2.3.4) but it is not installed libdrm-nouveau1a:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libdrm-radeon1:i386 : Depends: libc6:i386 (= 2.3.4) but it is not installed libdrm2:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libffi6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libfontconfig1:i386 : Depends: libc6:i386 (= 2.7) but it is not installed Depends: libexpat1:i386 (= 1.95.8) but it is not installed Depends: libfreetype6:i386 (= 2.2.1) but it is not installed libgcc1:i386 : Depends: libc6:i386 (= 2.2.4) but it is not installed libgcrypt11:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libgdbm3:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libglib2.0-0:i386 : Depends: libc6:i386 (= 2.9) but it is not installed libgpg-error0:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libice6:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libidn11:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libjpeg62:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libkeyutils1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed liblcms1:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libllvm2.9:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libmng1:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libpciaccess0:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libpcre3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed librtmp0:i386 : Depends: libc6:i386 (= 2.7) but it is not installed Depends: libgnutls26:i386 (= 2.9.11-0) but it is not installed libsasl2-2:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libsasl2-modules:i386 : Depends: libc6:i386 (= 2.4) but it is not installed Depends: libssl1.0.0:i386 (= 1.0.0) but it is not installed libselinux1:i386 : Depends: libc6:i386 (= 2.8) but it is not installed libsm6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libsqlite3-0:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libstdc++6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libuuid1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libx11-6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxau6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxcb1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxdamage1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxdmcp6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxext6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxfixes3:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxrender1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxss1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxt6:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libxxf86vm1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed zlib1g:i386 : Depends: libc6:i386 (= 2.4) but it is not installed E: Unmet dependencies. Try using -f. szikszay@szikszay-Latitude-E5530-non-vPro:~$ sudo apt-get upgrade -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages will be REMOVED libc-bin The following NEW packages will be installed libc-bin:i386 libc6:i386 libc6-i386 libcups2:i386 libcupsimage2:i386 libcurl3:i386 libdbus-1-3:i386 libexpat1:i386 libfreetype6:i386 libgl1-mesa-dri:i386 libgl1-mesa-glx:i386 libglapi-mesa:i386 libgnutls26:i386 libgssapi-krb5-2:i386 libk5crypto3:i386 libkrb5-3:i386 libkrb5support0:i386 libldap-2.4-2:i386 libnspr4:i386 libnss3:i386 libpng12-0:i386 libqt4-dbus:i386 libqt4-declarative:i386 libqt4-designer:i386 libqt4-network:i386 libqt4-opengl:i386 libqt4-qt3support:i386 libqt4-script:i386 libqt4-scripttools:i386 libqt4-sql:i386 libqt4-svg:i386 libqt4-test:i386 libqt4-xml:i386 libqt4-xmlpatterns:i386 libqtcore4:i386 libqtgui4:i386 libssl1.0.0:i386 libtasn1-3:i386 libtiff4:i386 libxi6:i386 The following packages have been kept back: ginn libgrip0 linux-headers-generic linux-image-generic unity unity-common xserver-xorg-input-evdev xserver-xorg-input-synaptics The following packages will be upgraded: accountsservice acpi-support acpid aisleriot alsa-utils app-install-data-partner apparmor appmenu-qt apport apport-gtk apt apt-transport-https apt-utils aptdaemon aptdaemon-data apturl apturl-common at-spi2-core bamfdaemon banshee banshee-extension-soundmenu banshee-extension-ubuntuonemusicstore baobab bind9-host binutils bluez bluez-alsa bluez-cups bluez-gstreamer brasero brasero-cdrkit brasero-common brltty bzip2 ca-certificates-java checkbox checkbox-gtk colord command-not-found command-not-found-data compiz compiz-core compiz-gnome compiz-plugins-default compiz-plugins-main-default cups cups-bsd cups-client cups-common cups-ppdc dbus dbus-x11 deja-dup desktop-file-utils dnsutils dpkg ecryptfs-utils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common file-roller firefox firefox-globalmenu firefox-gnome-support firefox-locale-en firefox-locale-hu gbrainy gcalctool gconf2 gconf2-common gedit gedit-common ghostscript ghostscript-cups ghostscript-x gir1.2-atspi-2.0 gir1.2-gconf-2.0 gir1.2-gnomebluetooth-1.0 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-totem-1.0 gir1.2-unity-4.0 gir1.2-webkit-3.0 gnome-accessibility-themes gnome-bluetooth gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-font-viewer gnome-games-common gnome-icon-theme gnome-keyring gnome-mahjongg gnome-online-accounts gnome-orca gnome-power-manager gnome-screenshot gnome-search-tool gnome-session gnome-session-bin gnome-session-canberra gnome-session-common gnome-settings-daemon gnome-sudoku gnome-system-log gnome-system-monitor gnome-utils-common gnomine gnupg gpgv grub-common grub-pc grub-pc-bin grub2-common gstreamer0.10-gconf gstreamer0.10-plugins-good gstreamer0.10-pulseaudio gvfs gvfs-backends gvfs-bin gvfs-fuse gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter gzip hpijs hplip hplip-cups hplip-data icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-netx ifupdown im-switch indicator-datetime indicator-session indicator-sound initramfs-tools initramfs-tools-bin initscripts insserv isc-dhcp-client isc-dhcp-common iso-codes jockey-common jockey-gtk language-pack-en language-pack-en-base language-pack-gnome-en language-pack-gnome-en-base language-pack-gnome-hu language-pack-gnome-hu-base language-pack-hu language-pack-hu-base language-selector-common language-selector-gnome libaccountsservice0 libapt-inst1.3 libapt-pkg4.11 libarchive1 libasound2-plugins libatk-adaptor libatspi2.0-0 libbamf0 libbamf3-0 libbind9-60 libbluetooth3 libbrasero-media3-1 libbrlapi0.5 libbz2-1.0 libc-dev-bin libc6 libc6-dev libcamel-1.2-29 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libcolord1 libcups2 libcupscgi1 libcupsdriver1 libcupsimage2 libcupsmime1 libcupsppdc1 libcurl3-gnutls libdbus-1-3 libdbus-glib-1-2 libdecoration0 libdns69 libebackend-1.2-1 libebook1.2-12 libecal1.2-10 libecryptfs0 libedata-book-1.2-11 libedata-cal-1.2-13 libedataserver1.2-15 libedataserverui-3.0-1 libevince3-3 libexif12 libexpat1 libfreetype6 libgail-3-0 libgail-3-common libgck-1-0 libgconf2-4 libgcr-3-1 libgdata-common libgdata13 libgl1-mesa-dri libgl1-mesa-glx libglapi-mesa libglu1-mesa libgnome-bluetooth8 libgnome-control-center1 libgnome-desktop-3-2 libgnutls26 libgoa-1.0-0 libgs9 libgs9-common libgssapi-krb5-2 libgtk-3-0 libgtk-3-bin libgtk-3-common libgtksourceview-3.0-0 libgtksourceview-3.0-common libgudev-1.0-0 libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libhpmud0 libicu44 libimobiledevice2 libisc62 libisccc60 libisccfg62 libjasper1 libjs-jquery libk5crypto3 libkrb5-3 libkrb5support0 libldap-2.4-2 liblightdm-gobject-1-0 liblwres60 libmetacity-private0 libmission-control-plugins0 libmono-cairo4.0-cil libmono-corlib4.0-cil libmono-csharp4.0-cil libmono-i18n-west4.0-cil libmono-i18n4.0-cil libmono-posix4.0-cil libmono-security4.0-cil libmono-sharpzip4.84-cil libmono-system-configuration4.0-cil libmono-system-core4.0-cil libmono-system-drawing4.0-cil libmono-system-security4.0-cil libmono-system-xml4.0-cil libmono-system4.0-cil libmono-zeroconf1.0-cil libmysqlclient16 libnautilus-extension1 libncurses5 libncursesw5 libnm-glib-vpn1 libnm-glib4 libnm-gtk-common libnm-gtk0 libnm-util2 libnotify0.4-cil libnspr4 libnss3 libnss3-1d libnux-1.0-0 libnux-1.0-common libpam-gnome-keyring libpam-modules libpam-modules-bin libpam-runtime libpam0g libperl5.12 libpng12-0 libpoppler-glib6 libpoppler13 libproxy0 libpulse-mainloop-glib0 libpulse0 libpurple-bin libpurple0 libpython2.7 libqt4-dbus libqt4-declarative libqt4-network libqt4-opengl libqt4-script libqt4-sql libqt4-sql-mysql libqt4-svg libqt4-xml libqt4-xmlpatterns libqtcore4 libqtgui4 libreoffice-base-core libreoffice-calc libreoffice-common libreoffice-core libreoffice-draw libreoffice-emailmerge libreoffice-gnome libreoffice-gtk libreoffice-help-en-gb libreoffice-help-en-us libreoffice-help-hu libreoffice-impress libreoffice-l10n-common libreoffice-l10n-en-gb libreoffice-l10n-en-za libreoffice-l10n-hu libreoffice-math libreoffice-style-human libreoffice-writer libsane-hpaio libsmbclient libsnmp-base libsnmp15 libssl1.0.0 libsyncdaemon-1.0-1 libt1-5 libtasn1-3 libtiff4 libtinfo5 libtotem0 libubuntuone-1.0-1 libubuntuone1.0-cil libudev0 libunity-core-4.0-4 libunity6 libusbmuxd1 libv4l-0 libvorbis0a libvorbisenc2 libvorbisfile3 libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libxi6 libxml2 libxslt1.1 lightdm linux-firmware linux-libc-dev mawk metacity metacity-common mobile-broadband-provider-info modemmanager mono-4.0-gac mono-gac mono-runtime mousetweaks multiarch-support mysql-common nautilus nautilus-data nautilus-sendto-empathy ncurses-base ncurses-bin network-manager network-manager-gnome nux-tools onboard openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl perl perl-base perl-modules poppler-utils pulseaudio pulseaudio-esound-compat pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-x11 pulseaudio-utils python-apport python-aptdaemon python-aptdaemon-gtk python-aptdaemon.gtk3widgets python-aptdaemon.gtkwidgets python-brlapi python-crypto python-cups python-cupshelpers python-egenix-mxdatetime python-egenix-mxtools python-gobject python-gobject-cairo python-httplib2 python-keyring python-launchpadlib python-libproxy python-libxml2 python-pam python-papyon python-pkg-resources python-problem-report python-pyatspi2 python-software-properties python-ubuntuone-client python-ubuntuone-storageprotocol python-uno python2.7 python2.7-minimal qdbus samba-common samba-common-bin seahorse shotwell simple-scan smbclient sni-qt software-center software-properties-common software-properties-gtk sudo system-config-printer-common system-config-printer-gnome system-config-printer-udev sysv-rc sysvinit-utils telepathy-indicator telepathy-mission-control-5 thunderbird thunderbird-globalmenu thunderbird-gnome-support thunderbird-locale-en thunderbird-locale-en-gb thunderbird-locale-en-us thunderbird-locale-hu tomboy totem totem-common totem-mozilla totem-plugins transmission-common transmission-gtk ttf-opensymbol tzdata tzdata-java ubuntu-desktop ubuntu-docs ubuntu-minimal ubuntu-sso-client ubuntu-standard ubuntuone-client ubuntuone-client-gnome ubuntuone-couch udev unity-lens-applications unity-services uno-libs3 update-manager update-manager-core update-notifier update-notifier-common upstart ure usbmuxd vim-common vim-tiny vinagre vino whois x11-common xdiagnose xorg xserver-common xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-video-all xserver-xorg-video-intel xserver-xorg-video-openchrome xserver-xorg-video-qxl xul-ext-ubufox WARNING: The following essential packages will be removed. This should NOT be done unless you know exactly what you are doing! libc-bin 498 upgraded, 40 newly installed, 1 to remove and 8 not upgraded. 69 not fully installed or removed. Need to get 439 MB of archives. After this operation, 135 MB of additional disk space will be used. You are about to do something potentially harmful To continue type in the phrase ‘Yes, do as I say!’ ?] I tried to upgrade but it gives me an error, when i try to upgrade-f it says i should delete libc-bin. Thanks for the answers btw. EDIT2: it also says this: The package system is broken If you are using third party repositories then disable them, since they are a common source of problems. Now run the following command in a terminal: apt-get install -f

    Read the article

  • Solaris X86 64-bit Assembly Programming

    - by danx
    Solaris X86 64-bit Assembly Programming This is a simple example on writing, compiling, and debugging Solaris 64-bit x86 assembly language with a C program. This is also referred to as "AMD64" assembly. The term "AMD64" is used in an inclusive sense to refer to all X86 64-bit processors, whether AMD Opteron family or Intel 64 processor family. Both run Solaris x86. I'm keeping this example simple mainly to illustrate how everything comes together—compiler, assembler, linker, and debugger when using assembly language. The example I'm using here is a C program that calls an assembly language program passing a C string. The assembly language program takes the C string and calls printf() with it to print the string. AMD64 Register Usage But first let's review the use of AMD64 registers. AMD64 has several 64-bit registers, some special purpose (such as the stack pointer) and others general purpose. By convention, Solaris follows the AMD64 ABI in register usage, which is the same used by Linux, but different from Microsoft Windows in usage (such as which registers are used to pass parameters). This blog will only discuss conventions for Linux and Solaris. The following chart shows how AMD64 registers are used. The first six parameters to a function are passed through registers. If there's more than six parameters, parameter 7 and above are pushed on the stack before calling the function. The stack is also used to save temporary "stack" variables for use by a function. 64-bit Register Usage %rip Instruction Pointer points to the current instruction %rsp Stack Pointer %rbp Frame Pointer (saved stack pointer pointing to parameters on stack) %rdi Function Parameter 1 %rsi Function Parameter 2 %rdx Function Parameter 3 %rcx Function Parameter 4 %r8 Function Parameter 5 %r9 Function Parameter 6 %rax Function return value %r10, %r11 Temporary registers (need not be saved before used) %rbx, %r12, %r13, %r14, %r15 Temporary registers, but must be saved before use and restored before returning from the current function (usually with the push and pop instructions). 32-, 16-, and 8-bit registers To access the lower 32-, 16-, or 8-bits of a 64-bit register use the following: 64-bit register Least significant 32-bits Least significant 16-bits Least significant 8-bits %rax%eax%ax%al %rbx%ebx%bx%bl %rcx%ecx%cx%cl %rdx%edx%dx%dl %rsi%esi%si%sil %rdi%edi%di%axl %rbp%ebp%bp%bp %rsp%esp%sp%spl %r9%r9d%r9w%r9b %r10%r10d%r10w%r10b %r11%r11d%r11w%r11b %r12%r12d%r12w%r12b %r13%r13d%r13w%r13b %r14%r14d%r14w%r14b %r15%r15d%r15w%r15b %r16%r16d%r16w%r16b There's other registers present, such as the 64-bit %mm registers, 128-bit %xmm registers, 256-bit %ymm registers, and 512-bit %zmm registers. Except for %mm registers, these registers may not present on older AMD64 processors. Assembly Source The following is the source for a C program, helloas1.c, that calls an assembly function, hello_asm(). $ cat helloas1.c extern void hello_asm(char *s); int main(void) { hello_asm("Hello, World!"); } The assembly function called above, hello_asm(), is defined below. $ cat helloas2.s /* * helloas2.s * To build: * cc -m64 -o helloas2-cpp.s -D_ASM -E helloas2.s * cc -m64 -c -o helloas2.o helloas2-cpp.s */ #if defined(lint) || defined(__lint) /* ARGSUSED */ void hello_asm(char *s) { } #else /* lint */ #include <sys/asm_linkage.h> .extern printf ENTRY_NP(hello_asm) // Setup printf parameters on stack mov %rdi, %rsi // P2 (%rsi) is string variable lea .printf_string, %rdi // P1 (%rdi) is printf format string call printf ret SET_SIZE(hello_asm) // Read-only data .text .align 16 .type .printf_string, @object .printf_string: .ascii "The string is: %s.\n\0" #endif /* lint || __lint */ In the assembly source above, the C skeleton code under "#if defined(lint)" is optionally used for lint to check the interfaces with your C program--very useful to catch nasty interface bugs. The "asm_linkage.h" file includes some handy macros useful for assembly, such as ENTRY_NP(), used to define a program entry point, and SET_SIZE(), used to set the function size in the symbol table. The function hello_asm calls C function printf() by passing two parameters, Parameter 1 (P1) is a printf format string, and P2 is a string variable. The function begins by moving %rdi, which contains Parameter 1 (P1) passed hello_asm, to printf()'s P2, %rsi. Then it sets printf's P1, the format string, by loading the address the address of the format string in %rdi, P1. Finally it calls printf. After returning from printf, the hello_asm function returns itself. Larger, more complex assembly functions usually do more setup than the example above. If a function is returning a value, it would set %rax to the return value. Also, it's typical for a function to save the %rbp and %rsp registers of the calling function and to restore these registers before returning. %rsp contains the stack pointer and %rbp contains the frame pointer. Here is the typical function setup and return sequence for a function: ENTRY_NP(sample_assembly_function) push %rbp // save frame pointer on stack mov %rsp, %rbp // save stack pointer in frame pointer xor %rax, %r4ax // set function return value to 0. mov %rbp, %rsp // restore stack pointer pop %rbp // restore frame pointer ret // return to calling function SET_SIZE(sample_assembly_function) Compiling and Running Assembly Use the Solaris cc command to compile both C and assembly source, and to pre-process assembly source. You can also use GNU gcc instead of cc to compile, if you prefer. The "-m64" option tells the compiler to compile in 64-bit address mode (instead of 32-bit). $ cc -m64 -o helloas2-cpp.s -D_ASM -E helloas2.s $ cc -m64 -c -o helloas2.o helloas2-cpp.s $ cc -m64 -c helloas1.c $ cc -m64 -o hello-asm helloas1.o helloas2.o $ file hello-asm helloas1.o helloas2.o hello-asm: ELF 64-bit LSB executable AMD64 Version 1 [SSE FXSR FPU], dynamically linked, not stripped helloas1.o: ELF 64-bit LSB relocatable AMD64 Version 1 helloas2.o: ELF 64-bit LSB relocatable AMD64 Version 1 $ hello-asm The string is: Hello, World!. Debugging Assembly with MDB MDB is the Solaris system debugger. It can also be used to debug user programs, including assembly and C. The following example runs the above program, hello-asm, under control of the debugger. In the example below I load the program, set a breakpoint at the assembly function hello_asm, display the registers and the first parameter, step through the assembly function, and continue execution. $ mdb hello-asm # Start the debugger > hello_asm:b # Set a breakpoint > ::run # Run the program under the debugger mdb: stop at hello_asm mdb: target stopped at: hello_asm: movq %rdi,%rsi > $C # display function stack ffff80ffbffff6e0 hello_asm() ffff80ffbffff6f0 0x400adc() > $r # display registers %rax = 0x0000000000000000 %r8 = 0x0000000000000000 %rbx = 0xffff80ffbf7f8e70 %r9 = 0x0000000000000000 %rcx = 0x0000000000000000 %r10 = 0x0000000000000000 %rdx = 0xffff80ffbffff718 %r11 = 0xffff80ffbf537db8 %rsi = 0xffff80ffbffff708 %r12 = 0x0000000000000000 %rdi = 0x0000000000400cf8 %r13 = 0x0000000000000000 %r14 = 0x0000000000000000 %r15 = 0x0000000000000000 %cs = 0x0053 %fs = 0x0000 %gs = 0x0000 %ds = 0x0000 %es = 0x0000 %ss = 0x004b %rip = 0x0000000000400c70 hello_asm %rbp = 0xffff80ffbffff6e0 %rsp = 0xffff80ffbffff6c8 %rflags = 0x00000282 id=0 vip=0 vif=0 ac=0 vm=0 rf=0 nt=0 iopl=0x0 status=<of,df,IF,tf,SF,zf,af,pf,cf> %gsbase = 0x0000000000000000 %fsbase = 0xffff80ffbf782a40 %trapno = 0x3 %err = 0x0 > ::dis # disassemble the current instructions hello_asm: movq %rdi,%rsi hello_asm+3: leaq 0x400c90,%rdi hello_asm+0xb: call -0x220 <PLT:printf> hello_asm+0x10: ret 0x400c81: nop 0x400c85: nop 0x400c88: nop 0x400c8c: nop 0x400c90: pushq %rsp 0x400c91: pushq $0x74732065 0x400c96: jb +0x69 <0x400d01> > 0x0000000000400cf8/S # %rdi contains Parameter 1 0x400cf8: Hello, World! > [ # Step and execute 1 instruction mdb: target stopped at: hello_asm+3: leaq 0x400c90,%rdi > [ mdb: target stopped at: hello_asm+0xb: call -0x220 <PLT:printf> > [ The string is: Hello, World!. mdb: target stopped at: hello_asm+0x10: ret > [ mdb: target stopped at: main+0x19: movl $0x0,-0x4(%rbp) > :c # continue program execution mdb: target has terminated > $q # quit the MDB debugger $ In the example above, at the start of function hello_asm(), I display the stack contents with "$C", display the registers contents with "$r", then disassemble the current function with "::dis". The first function parameter, which is a C string, is passed by reference with the string address in %rdi (see the register usage chart above). The address is 0x400cf8, so I print the value of the string with the "/S" MDB command: "0x0000000000400cf8/S". I can also print the contents at an address in several other formats. Here's a few popular formats. For more, see the mdb(1) man page for details. address/S C string address/C ASCII character (1 byte) address/E unsigned decimal (8 bytes) address/U unsigned decimal (4 bytes) address/D signed decimal (4 bytes) address/J hexadecimal (8 bytes) address/X hexadecimal (4 bytes) address/B hexadecimal (1 bytes) address/K pointer in hexadecimal (4 or 8 bytes) address/I disassembled instruction Finally, I step through each machine instruction with the "[" command, which steps over functions. If I wanted to enter a function, I would use the "]" command. Then I continue program execution with ":c", which continues until the program terminates. MDB Basic Cheat Sheet Here's a brief cheat sheet of some of the more common MDB commands useful for assembly debugging. There's an entire set of macros and more powerful commands, especially some for debugging the Solaris kernel, but that's beyond the scope of this example. $C Display function stack with pointers $c Display function stack $e Display external function names $v Display non-zero variables and registers $r Display registers ::fpregs Display floating point (or "media" registers). Includes %st, %xmm, and %ymm registers. ::status Display program status ::run Run the program (followed by optional command line parameters) $q Quit the debugger address:b Set a breakpoint address:d Delete a breakpoint $b Display breakpoints :c Continue program execution after a breakpoint [ Step 1 instruction, but step over function calls ] Step 1 instruction address::dis Disassemble instructions at an address ::events Display events Further Information "Assembly Language Techniques for Oracle Solaris on x86 Platforms" by Paul Lowik (2004). Good tutorial on Solaris x86 optimization with assembly. The Solaris Operating System on x86 Platforms An excellent, detailed tutorial on X86 architecture, with Solaris specifics. By an ex-Sun employee, Frank Hofmann (2005). "AMD64 ABI Features", Solaris 64-bit Developer's Guide contains rules on data types and register usage for Intel 64/AMD64-class processors. (available at docs.oracle.com) Solaris X86 Assembly Language Reference Manual (available at docs.oracle.com) SPARC Assembly Language Reference Manual (available at docs.oracle.com) System V Application Binary Interface (2003) defines the AMD64 ABI for UNIX-class operating systems, including Solaris, Linux, and BSD. Google for it—the original website is gone. cc(1), gcc(1), and mdb(1) man pages.

    Read the article

  • CodePlex Daily Summary for Monday, December 17, 2012

    CodePlex Daily Summary for Monday, December 17, 2012Popular ReleasesMove Mouse: Move Mouse 2.5.3: FIXED - Issue where it errors on load if the screen saver interval is over 333 minutes.LINUX????????: LINUX????????: LINUX????????cnbeta: cnbeta: cnbetaCSDN ??: CSDN??????: CSDN??????PowerShell Community Extensions: 2.1.1 Production: PowerShell Community Extensions 2.1.1 Release NotesDec 16, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. Bug fix for HelpUri error with the Get-Help proxy command. See the ReleaseNotes.txt download above for more information.CRM 2011 Navigation UI Record Counter: Navigation UI Record Counter v1.3.1: Fixes Bug with Chrome Bug with parseXml - reverted to good old indexOfVidCoder: 1.4.11 Beta: Added Hungarian translation, thanks to Brechler Zsolt. Update HandBrake core to SVN 5098. This update should fix crashes on some files. Updated the enqueue split button to fit in better with the active Windows theme. Updated presets to use x264 preset/profile/level.???: Cnblogs: CNBLOGSSandcastle Help File Builder: SHFB v1.9.6.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...Electricity, Gas and Temperature Monitoring with Netduino Plus: V1.0.1 Netduino Plus Monitoring: This is the first stable release from the Netduino Plus Monitoring program. Bugfixing The code is enhanced at some places in respect to the V0.6.1 version There is a possibility to add multiple S0 meters Website for realtime display of data Website for configuring the Netduino Comments are welcome! Additions will not be made to this version. This is the first and last major Netduino Plus V1 release. The new development will take place with the Netduino Plus V2 development board in mi...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.8): [FIX] Fixed issue not displaying CRM system button images correctly (incorrect path in file VisualRibbonEditor.exe.config)My Expenses Windows Store LOB App Demo: My Expenses Version 1: This is version 1 of the MyExpenses Windows 8 line of business demo app. The app is written in XAML and C#. It calls a WCF service that works with a SQL Server database. The app uses the Callisto toolkit. You can get it at https://github.com/timheuer/callisto. The Expenses.sql file contains the SQL to create the Expenses database. The ExpensesWCFService.zip file contains the WCF service, also written in C#. You should create a WCF service. Create an Entity Framework model and point it to...BlackJumboDog: Ver5.7.4: 2012.12.13 Ver5.7.4 (1)Web???????、???????????????????????????????????????????VFPX: ssClasses A1.0: My initial release. See https://vfpx.codeplex.com/wikipage?title=ssClasses&referringTitle=Home for a brief description of what is inside this releaseLayered Architecture Solution Guidance (LASG): LASG 1.0.0.8 for Visual Studio 2012: PRE-REQUISITES Open GAX (Please install Oct 4, 2012 version) Microsoft® System CLR Types for Microsoft® SQL Server® 2012 Microsoft® SQL Server® 2012 Shared Management Objects Microsoft Enterprise Library 5.0 (for the generated code) Windows Azure SDK (for layered cloud applications) Silverlight 5 SDK (for Silverlight applications) THE RELEASE This release only works on Visual Studio 2012. Known Issue If you choose the Database project, the solution unfolding time will be slow....Fiskalizacija za developere: FiskalizacijaDev 2.0: Prva prava produkcijska verzija - Zakon je tu, ova je verzija uskladena sa trenutno važecom Tehnickom specifikacijom (v1.2. od 04.12.2012.) i spremna je za produkcijsko korištenje. Verzije iza ove ce ovisiti o naknadnim izmjenama Zakona i/ili Tehnicke specifikacije, odnosno, o eventualnim greškama u radu/zahtjevima community-a za novim feature-ima. Novosti u v2.0 su: - That assembly does not allow partially trusted callers (http://fiskalizacija.codeplex.com/workitem/699) - scheme IznosType...Bootstrap Helpers: Version 1: First releaseDirectX Tool Kit: December 11, 2012: December 11, 2012 Ex versions of DDSTextureLoader and WICTextureLoader Removed use of ATL's CComPtr in favor of WRL's ComPtr for all platforms to support VS Express editions Updated VS 2010 project for official 'property sheet' integration for Windows 8.0 SDK Minor fix to CommonStates for Feature Level 9.1 Tweaked AlphaTestEffect.cpp to work around ARM NEON compiler codegen bug Added dxguid.lib as a default library for Debug builds to resolve GUID link issuesArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.1 Final for 10.1: We are proud to announce the release of ArcGIS Editor for OpenStreetMap version 2.1. This download is compatible with ArcGIS 10.1, and includes setups for the Desktop Component, Desktop Component when 64 bit Background Geoprocessing is installed, and the Server Component. Important: if you already have ArcGIS Editor for OSM installed but want to install this new version, you will need to uninstall your previous version and then install this one. This release includes support for the ArcGIS 1...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8.2: This release just contains some fixes that have been done since the last release. Plus, this is strong named as well. I apologize for the lack of updates but my free time is less these days.New ProjectsAzke: New: Azke is a portal developed with ASP.NET MVC and MySQL. Old: Azke is a portal developed with ASP.net and MySQL.BasicallyNot Visual Studio 2010 Extension: "BasicallyNot" is a new Visual Studio 2010 Extension. It is designed to "drastically improve your VB.Net productivity", and of course make you think happy thoughts about cookies.Beautiful Code: These are collections of random code that I have written, which I believe are "beautiful" in some respects (algorithm, usage of language features etc.).bjyxl2: a csla project for myself.Buscayasminas: Buscayasminas is an open source "Minesweeper" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse and keyboard optionally. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.Check if Knowledge Base fix is installed script: A handy script that checks if a knowledge base fix is installed or not.cnbeta: CNBETA ???????CSDN ??: CSDN????????IT??DateTime Class: DateTime Class with several methods: -NumberOfBusinessDaysFrom -IsWorkDay -NextBusinessDay -PreviousBusinessDayECSE6770: An web application for Software Engineering at RPI Hartford.Google+ for Windows Phone 7: Nothing here now.Koch Curve in Silverlight: This program generates the Koch curve using the Silverlight browser plugin.LINUX????????: LINUX????????longchang capture project: this is the project of longchang traffic police capture.Luna Programming Editor: Luna Programming Editor aims to be a simple but very functional, open source programming editor for developers who want to be more productive.markgrovestest: Azure TestMerge PDF Files: This class implement the merge of PDF filesMetroWeb: Metro web is a new modern web browser that provide a different experience for web browsing it just show any traditional web site as a metro designed websiteMinecraft 1.4.4 -- Learning Java: But a simple attempt at modding Minecraft over two different computers not on the same network.Nhóm CKT11: chia s? code nhóm ckt11Orchard.DecoratorField: Orchard Module to add new fieldsPhysic Engine: Physic EnginePixentration: UIS projectPomidoro: Windows store app: timer, which can be used in the application of 'Pomodoro Technique'.ROBO XERO Control: ROBO XERO ??????????????????????。ruc: Buscar en RUC de Paraguay.Send Email Class: Generic class to send emailsServiceProcessManagement: ?????SPMSeven Zip Wrapper: This small application which allows to call 7zip to create an archive, but skip compression for specific file extensions, which are usually already compressed.SharpShell: SharpShell is a .NET class library that lets you build Windows Shell Extensions using C# or VB.Silverseed.Core: Silverseed.Core is planned to be a common library for a variety of tools I'm planning to write, one of which is already available at Codeplex: [url:RepoCop|http://repocop.codeplex.com].Sistemas De Seguridad: integrantes jorge sara marieta douglassSomeTD: someSourPresser: komprese zdrojoveho kodu, zakodovani do B64 a oznaceni jako "nekompiluj" pro CIL kompilator. ....nekdy uzitecne.....The Curse: The Curse UO. Helping make the runUO community better.TIF Manipulation (Image): Tif Image Manipulation (Split, GetPage, Save Tif format...)Tiny Image Filters: This is a basic image processing library for Windows Phone. It is going to help developing photo effect app on Windows Phone.TrainGroup: This LightSwitch Project aims to be a simple management tool for any kind of training groups.Windows 7 Logon Tweaker: A Simple Software Used To Change The Logon Background Of Windows 7Windows Disguiser: Windows Disguiser is a little program that allows to automatically disguise minimized windows into the system tray.Windows Forms Metro: This project aims to create a library of controls & templates of Windows 8 Metro Style UI elements, for those who still using/loves windows forms.WPF Open Dialog: WPF Open Dialog is a simple and free open file/folder dialog for WPF using MVVM pattern. ???: ????????

    Read the article

  • Taking web sites offline for demonstration

    While working in software development in general, and in web development for a couple of customers it is quite common that it is necessary to provide a test bed where the client is able to get an image, or better said, a feeling for the visions and ideas you are talking about. Usually here at IOS Indian Ocean Software Ltd. we set up a demo web site on one of our staging servers, and provide credentials to the customer to access and review our progress and work ad hoc. This gives us the highest flexibility on both sides, as the test bed is simply online and available 24/7. We can update the structure, the UI and data at any time, and the client is able to view it as it suits best for her/him. Limited or lack of online connectivity But what is going to happen when your client is not capable to be online - no matter for what reasons; here are some more obvious ones: No internet connection (permanently or temporarily) Expensive connection, ie. mobile data package, stay at a hotel, etc. Presentation devices at an exhibition, ie. using tablets or iPads Being abroad for a certain time, and only occasionally online No network coverage, especially on mobile Bad infrastructure, like ie. in Third World countries Providing a catalogue on CD or USB pen drive Anyway, it doesn't matter really. We should be able to provide a solution for the circumstances of our customers. Presentation during an exhibition Recently, we had the following request from a customer: Is it possible to let us have a desktop version of ResortWork.co.uk that we can use for demo purposes at the forthcoming Ski Shows? It would allow us to let stand visitors browse the sites on an iPad to view jobs and training directory course listings. Yes, sure we can do that. Eventually, you might think why don't they simply use 3G enabled iPads for that purpose? As stated above, there might be several reasons for that - low coverage, expensive data packages, etc. Anyway, it is not a question on how to circumvent the request but to deliver a solution to that. Possible solutions... or not? We already did offline websites earlier, and even established complete mirrors of one or two web sites on our systems. There are actually several possibilities to handle this kind of request, and it mainly depends on the system or device where the offline site should be available on. Here, it is clearly expressed that we have to address this on an Apple iPad, well actually, I think that they'd like to use multiple devices during their exhibitions. Following is an overview of possible solutions depending on the technology or device in use, and how it can be done: Replication of source files and database The above mentioned web site is running on ASP.NET, IIS and SQL Server. In case that a laptop or slate runs a Windows OS, the easiest way would be to take a snapshot of the source files and database, and transfer them as local installation to those Windows machines. This approach would be fully operational on the local machine. Saving pages for offline usage This is actually a quite tedious job but still practicable for small web sites Tool based approach to 'harvest' the web site There quite some tools in the wild that could handle this job, namely wget, httrack, web copier, etc. Screenshots bundled as PDF document Not really... ;-) Creating screencast or video Simply navigate through your website and record your desktop session. Actually, we are using this kind of approach to track down difficult problems in order to see and understand exactly what the user was doing to cause an error. Of course, this list isn't complete and I'd love to get more of your ideas in the comments section below the article. Preparations for offline browsing The original website is dynamically and data-driven by ASP.NET, and looks like this: As we have to put the result onto iPads we are going to choose the tool-based approach to 'download' the whole web site for offline usage. Again, depending on the complexity of your web site you might have to check which of the applications produces the best results for you. My usual choice is to use wget but in this case, we run into problems related to the rewriting of hyperlinks. As a consequence of that we opted for using HTTrack. HTTrack comes in different flavours, like console application but also as either GUI (WinHTTrack on Windows) or Web client (WebHTTrack on Linux/Unix/BSD). Here's a brief description taken from the original website about HTTrack: HTTrack is a free (GPL, libre/free software) and easy-to-use offline browser utility. It allows you to download a World Wide Web site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. Simply open a page of the "mirrored" website in your browser, and you can browse the site from link to link, as if you were viewing it online. And there is an extensive documentation for all options and switches online. General recommendation is to go through the HTTrack Users Guide By Fred Cohen. It covers all the initial steps you need to get up and running. Be aware that it will take quite some time to get all the necessary resources down to your machine. Actually, for our customer we run the tool directly on their web server to avoid unnecessary traffic and bandwidth. After a couple of runs and some additional fine-tuning - explicit inclusion or exclusion of various external linked web sites - we finally had a more or less complete offline version available. A very handsome feature of HTTrack is the error/warning log after completing the download. It contains some detailed information about errors that appeared on the pages and the links within the pages that have been processed. Error: "Bad Request" (400) at link www.resortwork.co.uk/job-details_Ski_hire:tech_or_mgr_or_driver_37854.aspx (from www.resortwork.co.uk/Jobs_A_to_Z.aspx)Error: "Not Found" (404) at link www.247recruit.net/images/applynow.png (from www.247recruit.net/css/global.css)Error: "Not Found" (404) at link www.247recruit.net/activate.html (from www.247recruit.net/247recruit_tefl_jobs_network.html) In our situation, we took the records of HTTP 400/404 errors and passed them to the web development department. Improvements are to be expected soon. ;-) Quality assurance on the full-featured desktop Unfortunately, the generated output of HTTrack was still incomplete but luckily there were only images missing. Being directly on the web server we simply copied the missing images from the original source folder into our offline version. After that, we created an archive and transferred the file securely to our local workspace for further review and checks. From that point on, it wasn't necessary to get any more files from the original web server, and we could focus ourselves completely on the process of browsing and navigating through the offline version to isolate visual differences and functional problems. As said, the original web site runs on ASP.NET Web Forms and uses Postback calls for interaction like search, pagination and partly for navigation. This is the main field of improving the offline experience. Of course, same as for standard web development it is advised to test with various browsers, and strangely we discovered that the offline version looked pretty good on Firefox, Chrome and Safari, but not in Internet Explorer. A quick look at the HTML source shed some light on this, and there are conditional CSS inclusions based on the user agent. HTTrack is not acting as Internet Explorer and so we didn't have the necessary overrides for this browser. Not problematic after all in our case, but you might have to pay attention to this and get the IE-specific files explicitly. And while having a view at the source code, we also found out that HTTrack actually modifies the generated HTML output. In several occasions we discovered that <div> elements were converted into <table> constructs for no obvious reason; even nested structures. Search 'e'nd destroy - sed (or Notepad++) to the rescue During our intensive root cause analysis for a couple of HTML/CSS problems that needed some extra attention it is very helpful to be familiar with any editor that allows search and replace over multiple files like, ie. sed - stream editor for filtering and transforming text on Linux or my personal favourite Notepad++ on Windows. This allowed us to quickly fix a lot of anchors with onclick attributes and Javascript code that was addressed to ASP.NET files instead of their generated HTML counterparts, like so: grep -lr -e '.aspx' * | xargs sed -e 's/.aspx/.html?/g' The additional question mark after the HTML extension helps to separate the query string from the actual target and solved all our missing hyperlinks very fast. The same can be done in Notepad++ on Windows, too. Just use the 'Replace in files' feature and you are settled. Especially, in combination with Regular Expressions (regex). Landscape of browsers Okay, after several runs of HTML/CSS code analysis, searching and replacing some strings in a pool of more than 4.000 files, we finally had a very good match of an offline browsing experience in Firefox and Chrome on Linux. Next, we transferred that modified set of files to a Windows 8 machine for review on Firefox, Chrome and Internet Explorer 7 to 10, and a Mac mini running Mac OS X 10.7 to check the output on Safari and again on Chrome. Besides IE, for reasons already mentioned above, the results were identical. And last but not least it was about to check web site on tablets. Please continue to read on the following articles: Taking web sites offline for demonstration on Galaxy Tablet Taking web sites offline for demonstration on iPad

    Read the article

  • CodePlex Daily Summary for Tuesday, October 30, 2012

    CodePlex Daily Summary for Tuesday, October 30, 2012Popular ReleasesCleverBobCat: CleverBobCat 0.4: Added: ModuleCleverResourceTransferMCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...ZXMAK2: Version 2.6.8.0: Whats new: add Spectrum +3 model; tape serializer: show extended info for crc bad blocksMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.RiP-Ripper & PG-Ripper: PG-Ripper 1.4.03: changes FIXED: Kitty-Kats new Forum UrlJobboard Light Edition: Version 2.2: Major Release Parallalization Added Job posting now working Job Editing now working Search Box Clear Filters added Search criteria updated (more simple) jobdetails page displays missing selections parameters added to url Cleaned UI moreMJP's DirectX 11 Samples: MSAA Resolve Filtering: Sample application and source code from the article "Experimenting with Reconstruction Filters for MSAA Resolve" http://mynameismjp.wordpress.com/2012/10/28/msaa-resolve-filters/Liberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1025.5): [NEW] Support for connecting to CRM Online via Office 365 (OSDP) [NEW] Current connection information and loaded ribbon name are displayed in the status bar [IMPROVED] Connect dialog minor improvements and error message descriptions [IMPROVED] Connecting to a CRM server will close currently loaded ribbon upon confirmation (if another ribbon was loaded previously) [FIX] Fixed bug in Open Ribbon dialog which would not allow to refresh entity list more than onceNew Projects10010dshjlahfajhflkjhkjhherkjhfkja: 10010dshjlahfajhflkjhkjhherkjhfkjaA supplementary Machine Learning and Evolutionary Computation suite for Orange: ML & EC tools such as: - Optimization Meta-heuristics (EDAs, cGA) - Feature Selection - Kernel Methods - Dependency NetworksATH TaskList 2012: ATH TaskList 2012Canlipe: This is a simple C# / Mono (.NET) static blog generator. Nothing fancy, just the basic functionality at the moment. The code is really dirty too.com.sogeti.certif: Basic but essential source code example for SharePoint 2010Duhking: A quasi-duck typing library for .Net. It doesn't provide "real" duck typing, but it kinda looks a little bit like a duck if you squint and look at it from a distance. This library is built on and for .Net 3.5,Guestbook 2: A highly customizable program to track people visiting a booth via recording their name and some basic information. Written in C#.Interval Mandelbrot Explorer: Explore the Mandelbrot set using interval arithmetic.Isel - Projecto: projecto para isel....killStudentMain: killStudentMainKWSystem-WithClient: c++??La villa del seis: La villa del seis is a multiplatform point-and-click graphical adventure. Also, you can play it like a text adventure (interactive fiction) on a text browser (like Links, w3m or Lynx) or in a normal browser without JavaScript support.malversuchen: Das ist ein TEstPhotoCloud: This is a sample ASP.NET Web Pages app that uses Twitter authentication, HTMl5 drag and drop file uploading, blob storage, and SignalR to build a photo sharing platnosci-test: testSharePoint GSC: SharePoint GSC is a set of SharePoint utilities developed in General de Software. SHCODE: SH Project please contact little_deer@hotmail.com for more details.SimpleImageCacherRT: WinRT????????????????????。Windows.UI.XAML.Controls.Image????Source?????????????????????。???????????????…SLIP Framework: SilverLightweight Prism FrameworkSmallCheck: F# exhaustive testing framework. Port of Haskell SmallCheck test librarySolution organizer: Help developers organizing their Visual Studio 2010 solutionsSukul: Web 2.0 Portal for powering modern CMStestjabbr1029: heTFS Reflect Work Items Links: This small utility allows complex TFS to TFS migration to preserve work item links during the process. It is used in complement with the TFS Integration tools.XactiSource Application Framework: The XactiSource Application Framework is an attempt to add basic functionality that can be used from one project to the next. Yasminoku: Yasminoku is an open source "Sudoku" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. Includes sudoku solver. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.Zalgo for Word: Zalgo addin for Word 2010

    Read the article

  • vSphere Client vCenter Template Customization Specification Using Windows Sysprep Unattended Answer XML File

    - by Brian
    I'm trying to setup a vSphere Client vCenter v5.0.0 Build 455964 Template Customization Specification using a Windows Sysprep unattended answer XML file for Win2008R2. However I didn't know how Sysprep worked before attempting this so it was a time-consuming nightmare (even after reviewing VMware vSphere ESXi 5's documentation)! I think I've figure out what I'm supposed to be doing, but it's still not working. The biggest problem at this point is that vSphere Client vCenter Customization Specification IP address information is not sticking when I load a Sysprep XML file with just 1 basic setting! This can only be a bug. Here is the process I'm using: PROCESS for Windows - vSphere Client Install Windows OS install VM Tools customize Windows (GPOs can be used to do this after deployment) install Applications (GPOs can be used to do this after deployment too) shutdown the VM convert the VM to a template create a custom Windows Sysprep XML answer file with desired customizations View Management Customization Specifications Manager create "New" Specification for "Target Virtual Machine OS" select Windows check "Use Custom Sysprep Answer File" (ADDS: Custom Sysprep File. KEEPS: Network (IP), Operating System Options (SID, Sysprep /generalize). REPLACES: Registration Information of Owner Name & Organization, Computer Name, Windows License (Key), Administrator Password, Time Zone, Run Once, Workgroup or Domain) name it as "VMwareCS-OS####R#x32/64w/Sysprep-TEST" (CS=Customization Specification) set Description as "Created YYYY/MM/DD by FLast" NEXT import a Sysprep answer file from secure location NEXT Custom settings NEXT click "..." box to right of "Use DHCP" set "Use the following IP settings:" for "IP Address" fill out the first 2 octets set appropriate values for other 2-3 fields set DNS server addresses OK NEXT check "Generate New Security ID (SID)" ALWAYS as template is likely a domain-member computer so it can be updated occasionally NEXT Finish View Inventory VMs and Templates right-click previously completed template Deploy Virtual Machine from this Template provide the new OS name (max15char) select inventory location NEXT select Host/Cluster (wait for validation to succeed) NEXT select Resource Pool (wait for validation to succeed) NEXT select Storage location NEXT check "Power on this virtual machine after creation" select "Customize using an existing customization specification" select desired specification select "Use the Customization Wizard to temporarily adjust the specification before deployment" NEXT NEXT Custom settings? NEXT check "Generate New Security ID (SID)" ALWAYS as template is likely a domain-member computer so it can be updated occasionally NEXT Finish Finish. I know a community member named "brian" (http://serverfault.com/users/25904/brian) has worked with this scenario before, but I couldn't figure out how to contact him directly, so Brian if you see this message could you provide some information to help? Thanks, Brian

    Read the article

  • getfacl command and Linux file permissions - getting 403 error when accessing Wordpress

    - by tommytwoeyes
    I'm configuring Wordpress for a friend, and I just screwed up the Wordpress directory permissions (I suspect) using setfacl. Webfaction doesn't allow sudo or allow me to change the directory group ownership using chown. Now it appears that something I did is causing the entire application to give me 403 errors when I try to access it. The current directory listing looks like this (I set the whole thing to 777 temporarily to try to recover access to it): drwxrwsr-x+ 6 myusername myusername 4096 Mar 2 07:07 ./ drwxr-xr-x 3 root root 4096 Feb 25 19:48 ../ -rwxrwxr-x+ 1 myusername myusername 286 Mar 2 06:33 gzip.php -rwxrwxr-x+ 1 myusername myusername 4831 Mar 4 20:02 .htaccess -rwxrwxr-x+ 1 myusername myusername 397 Feb 25 19:49 index.php -rw-rw-r--+ 1 myusername myusername 15606 Feb 25 19:49 license.txt -rw-rw-r--+ 1 myusername myusername 9200 Feb 25 19:49 readme.html drwxrwsr-x+ 6 myusername myusername 4096 Feb 25 19:49 .svn/ -rwxrwxr-x+ 1 myusername myusername 4337 Feb 25 19:49 wp-activate.php drwxr-xr-x+ 10 myusername myusername 4096 Mar 4 20:03 wp-admin/ -rwxrwxr-x+ 1 myusername myusername 40283 Feb 25 19:49 wp-app.php -rwxrwxr-x+ 1 myusername myusername 226 Feb 25 19:49 wp-atom.php -rwxrwxr-x+ 1 myusername myusername 274 Feb 25 19:49 wp-blog-header.php -rwxrwxr-x+ 1 myusername myusername 3931 Feb 25 19:49 wp-comments-post.php -rwxrwxr-x+ 1 myusername myusername 244 Feb 25 19:49 wp-commentsrss2.php -rwxrwxr-x+ 1 myusername myusername 3485 Feb 25 20:15 wp-config.php drwxr-xr-x+ 6 myusername myusername 4096 Feb 26 08:52 wp-content/ -rwxrwxr-x+ 1 myusername myusername 1255 Feb 25 19:49 wp-cron.php -rwxrwxr-x+ 1 myusername myusername 246 Feb 25 19:49 wp-feed.php drwxrwxr-x+ 9 myusername myusername 4096 Feb 25 19:49 wp-includes/ -rwxrwxr-x+ 1 myusername myusername 1997 Feb 25 19:49 wp-links-opml.php -rwxrwxr-x+ 1 myusername myusername 2453 Feb 25 19:49 wp-load.php -rwxrwxr-x+ 1 myusername myusername 27787 Feb 25 19:49 wp-login.php -rwxrwxr-x+ 1 myusername myusername 7774 Feb 25 19:49 wp-mail.php -rwxrwxr-x+ 1 myusername myusername 494 Feb 25 19:49 wp-pass.php -rwxrwxr-x+ 1 myusername myusername 224 Feb 25 19:49 wp-rdf.php -rwxrwxr-x+ 1 myusername myusername 334 Feb 25 19:49 wp-register.php -rwxrwxr-x+ 1 myusername myusername 226 Feb 25 19:49 wp-rss2.php -rwxrwxr-x+ 1 myusername myusername 224 Feb 25 19:49 wp-rss.php -rwxrwxr-x+ 1 myusername myusername 9655 Feb 25 19:49 wp-settings.php -rwxrwxr-x+ 1 myusername myusername 18644 Feb 25 19:49 wp-signup.php -rwxrwxr-x+ 1 myusername myusername 3702 Feb 25 19:49 wp-trackback.php -rwxrwxr-x+ 1 myusername myusername 3210 Feb 25 19:49 xmlrpc.php The getfacl output looks like this: # file: . # owner: myusername # group: myusername user::rwx group::r-x group:apache:rw- mask::rwx other::r-x I simply wanted to change the ownership to myusername:apache and the file permissions to 755. I have no idea how to fix the permissions now. Any help would be really appreciated! Thanks, Tom

    Read the article

  • Supervisord appears to be running, but monitored programs aren't launched

    - by Brad Montgomery
    I've got supervisord 3.0a8 installed from the system package on ubuntu 10.04 (64bit). The supervisor service appears to be running, but it's not launching the configured programs. Interestingly enough, this exact configuration is running on another system, and is working as expected. The main config file looks like this: ; /etc/supervisor/supervisord.conf [unix_http_server] chmod=0700 file=/var/run/supervisor.sock [supervisord] logfile=/var/log/supervisor/supervisord.log childlogdir=/var/log/supervisor pidfile=/var/run/supervisord.pid [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///var/run/supervisor.sock [include] files = /etc/supervisor/conf.d/*.conf A sample program config looks like this: ; /etc/supervisor/conf.d/sample.conf [program:sample] directory=/opt/sample command=/opt/sample/run.sh Where, the /opt/sample/run.sh is: #!/bin/bash while true; do T=`date` echo "[$T] Running!" >> /var/log/sample.log sleep 1 done And, here's some additional information regarding the running instance of supervisord: root@myhost:~# supervisorctl version 3.0a8 root@myhost:~# which supervisorctl /usr/bin/supervisorctl root@myhost:~# which supervisord /usr/bin/supervisord root@myhost:~# supervisorctl status # NOTE that there's no output! root@myhost:~# supervisorctl avail root@myhost:~# service supervisor status is running root@myhost:~# ps aux | grep supervisor root 21740 0.1 0.4 40772 10056 ? Ss 11:28 0:00 /usr/bin/python /usr/bin/supervisord root 21749 0.0 0.0 7624 932 pts/2 S+ 11:28 0:00 grep --color=auto supervisor root@myhost:~# cat /var/log/supervisor/supervisord.log 2012-04-26 11:28:22,483 CRIT Supervisor running as root (no user in config file) 2012-04-26 11:28:22,536 INFO RPC interface 'supervisor' initialized 2012-04-26 11:28:22,536 WARN cElementTree not installed, using slower XML parser for XML-RPC 2012-04-26 11:28:22,536 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2012-04-26 11:28:22,539 INFO daemonizing the supervisord process 2012-04-26 11:28:22,539 INFO supervisord started with pid 21740 root@myhost:~# ll /etc/supervisor/conf.d/ total 28 drwxr-xr-x 2 root root 4096 2012-04-26 11:31 ./ drwxr-xr-x 3 root root 4096 2012-04-25 18:38 ../ -rw-r--r-- 1 root root 66 2012-04-26 11:31 sample.conf root@myhost:~# ll /opt/sample/ total 12 drwxr-xr-x 2 root root 4096 2012-04-26 11:32 ./ drwxr-xr-x 4 root root 4096 2012-04-26 11:31 ../ -rwxr-xr-x 1 root root 97 2012-04-26 11:32 run.sh* root@myhost:~# python Python 2.6.5 (r265:79063, Apr 16 2010, 13:57:41) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> Any help is greatly appreciated!

    Read the article

  • BUILDROOT files during RPM generation

    - by khmarbaise
    Currently i have the following spec file to create a RPM. The spec file is generated by maven plugin to produce a RPM out of it. The question is: will i find files which are mentioned in the spec file after the rpm generation inside the BUILDROOT/SPECS/SOURCES/SRPMS structure? %define _unpackaged_files_terminate_build 0 Name: rpm-1 Version: 1.0 Release: 1 Summary: rpm-1 License: 2009 my org Distribution: My App Vendor: my org URL: www.my.org Group: Application/Collectors Packager: my org Provides: project Requires: /bin/sh Requires: jre >= 1.5 Requires: BASE_PACKAGE PreReq: dependency Obsoletes: project autoprov: yes autoreq: yes BuildRoot: /home/build/.jenkins/jobs/rpm-maven-plugin/workspace/target/it/rpm-1/target/rpm/rpm-1/buildroot %description %install if [ -e $RPM_BUILD_ROOT ]; then mv /home/build/.jenkins/jobs/rpm-maven-plugin/workspace/target/it/rpm-1/target/rpm/rpm-1/tmp-buildroot/* $RPM_BUILD_ROOT else mv /home/build/.jenkins/jobs/rpm-maven-plugin/workspace/target/it/rpm-1/target/rpm/rpm-1/tmp-buildroot $RPM_BUILD_ROOT fi ln -s /usr/myusr/app $RPM_BUILD_ROOT/usr/myusr/app2 ln -s /tmp/myapp/somefile $RPM_BUILD_ROOT/tmp/myapp/somefile2 ln -s name.sh $RPM_BUILD_ROOT/usr/myusr/app/bin/oldname.sh %files %defattr(-,myuser,mygroup,-) %dir "/usr/myusr/app" "/usr/myusr/app2" "/tmp/myapp/somefile" "/tmp/myapp/somefile2" "/usr/myusr/app/lib" %attr(755,myuser,mygroup) "/usr/myusr/app/bin/start.sh" %attr(755,myuser,mygroup) "/usr/myusr/app/bin/filter-version.txt" %attr(755,myuser,mygroup) "/usr/myusr/app/bin/name.sh" %attr(755,myuser,mygroup) "/usr/myusr/app/bin/name-Linux.sh" %attr(755,myuser,mygroup) "/usr/myusr/app/bin/filter.txt" %attr(755,myuser,mygroup) "/usr/myusr/app/bin/oldname.sh" %dir "/usr/myusr/app/conf" %config "/usr/myusr/app/conf/log4j.xml" "/usr/myusr/app/conf/log4j.xml.deliver" %prep echo "hello from prepare" %pre -p /bin/sh #!/bin/sh if [ -s "/etc/init.d/myapp" ] then /etc/init.d/myapp stop rm /etc/init.d/myapp fi %post #!/bin/sh #create soft link script to services directory ln -s /usr/myusr/app/bin/start.sh /etc/init.d/myapp chmod 555 /etc/init.d/myapp %preun #!/bin/sh #the argument being passed in indicates how many versions will exist #during an upgrade, this value will be 1, in which case we do not want to stop #the service since the new version will be running once this script is called #during an uninstall, the value will be 0, in which case we do want to stop #the service and remove the /etc/init.d script. if [ "$1" = "0" ] then if [ -s "/etc/init.d/myapp" ] then /etc/init.d/myapp stop rm /etc/init.d/myapp fi fi; %triggerin -- dependency, dependency1 echo "hello from install" %changelog * Tue May 23 2000 Vincent Danen <[email protected]> 0.27.2-2mdk -update BuildPreReq to include rep-gtk and rep-gtkgnome * Thu May 11 2000 Vincent Danen <[email protected]> 0.27.2-1mdk -0.27.2 * Thu May 11 2000 Vincent Danen <[email protected]> 0.27.1-2mdk -added BuildPreReq -change name from Sawmill to Sawfish The problem i found is that the files (filter.txt in particular) after the generation process on a Ubuntu system but not on SuSE system. Which might be caused by different rpm versions ? Currently we have an integration test which fails based on the non existing of the file (filter.txt under a buildroot folder?)

    Read the article

  • Easiest way to replace preinstalled Windows 8 with new hard drive with Windows 7

    - by Andrew
    There are all kinds of questions and answers relevant moving Windows 8 to a new hard drive. I'm not seeing anything quite applicable to my situation. I have a new, unopened, unbooted notebook with pre-installed Windows 8. I will be replacing the hard drive before ever booting, unless that is not possible for some reason. I want to "downgrade" to Windows 7 Pro, and I want a clean installation. To do so legitimately, I apparently either need to: Upgrade Windows 8 to Windows 8 Pro using Windows 8 Pro Pack, then downgrade; or Just install a newly-licensed copy of Windows 7 Pro. (Let me know if I've missed an option.) Installation media is likely not a problem, though if I need something vendor-specific that I cannot otherwise download, that could present an issue (Asus notebook, if that matters). If I could, I would just buy the Pro Pack upgrade, swap the hard drive (without ever booting), then install Windows 7 Pro directly on the new hard drive, using the Pro Pack key for activation. Will this work? Are there any activation issues? Edited to clarify, as some comments and answers indicate confusion: Here is, ideally, what I want to do: Before ever powering on the notebook, remove the current hard drive. Replace this hard drive with a new, blank hard drive. Install a clean copy of Windows 7 Pro on this new, blank hard drive. Unless I have no choice to accomplish the end result (a clean install of Win7 Pro on the newly-installed, previously-blank hard drive), I am not wanting to: Install Windows 7 "over" the current Windows 8 install (after upgrading to Win8 Pro). That would involve using the currenly-installed hard drive. I want to use a new, different hard drive. Copy the Win8 install to the new hard drive, then install Windows 7 "over" that installation. Install Windows 7 "over" the current Windows 8 install (after upgrading to Win8 Pro), then copy the installation to the new hard drive. If I have to use one of those three options, I will, but only if there is no other choice. Please note that this question is not about licensing: I will purchase the necessary license(s) to accomplish this procedure legally (apparently either Win8 Pro Pack or Win7 Pro -- the former currently appears less expensive).

    Read the article

  • Puppet Directory and File ownership ignored

    - by Phil Sturgeon
    Puppet seems to be lying to me, which is not very nice. I am trying to set some files and directories included in /vagrant/src to be 666 and 777, and set the ownership group to the correct Apache user (using the PuppetLabs Apache module). Output from Puppet says yes. [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with /tmp/vagrant-puppet/manifests/default.pp... stdin: is not a tty No LSB modules are available. warning: require is a metaparam; this value will inherit to all contained resources warning: notify is a metaparam; this value will inherit to all contained resources notice: /Stage[main]//File[/vagrant/src/addons/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/addons/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/addons/]/mode: mode changed '0755' to '0777' notice: /Stage[main]//Package[curl]/ensure: ensure changed 'purged' to 'present' notice: /Stage[main]//File[/vagrant/src/system/cms/config/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/config/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/config/]/mode: mode changed '0755' to '0777' notice: /Stage[main]//File[/vagrant/src/system/cms/config/config.php]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/config/config.php]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/cache/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/cache/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/cache/]/mode: mode changed '0755' to '0777' notice: /Stage[main]//File[/vagrant/src/uploads/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/uploads/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/uploads/]/mode: mode changed '0755' to '0777' notice: /Stage[main]/Apache/Service[httpd]/ensure: ensure changed 'stopped' to 'running' notice: /Stage[main]//File[/vagrant/src/assets/cache/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/assets/cache/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/assets/cache/]/mode: mode changed '0755' to '0777' notice: Finished catalog run in 2.29 seconds Output from ls -lah says no: $ ls -lah /vagrant/src/ total 36K drwxr-xr-x 1 vagrant vagrant 510 2012-07-03 00:11 . drwxr-xr-x 1 vagrant vagrant 340 2012-07-03 08:08 .. drwxr-xr-x 1 vagrant vagrant 136 2012-07-03 00:11 addons drwxr-xr-x 1 vagrant vagrant 102 2012-07-03 00:11 assets drwxr-xr-x 1 vagrant vagrant 510 2012-07-03 07:45 .git -rw-r--r-- 1 vagrant vagrant 1.3K 2012-07-03 00:11 .gitignore -rwxr-xr-x 1 vagrant vagrant 1.4K 2012-07-03 00:11 .htaccess -rwxr-xr-x 1 vagrant vagrant 8.8K 2012-07-03 00:11 index.php drwxr-xr-x 1 vagrant vagrant 442 2012-07-03 00:11 installer -rwxr-xr-x 1 vagrant vagrant 2.8K 2012-07-03 00:11 LICENSE -rw-r--r-- 1 vagrant vagrant 1.1K 2012-07-03 00:11 phpdoc.dist.xml -rw-r--r-- 1 vagrant vagrant 3.3K 2012-07-03 00:11 README.md drwxr-xr-x 1 vagrant vagrant 204 2012-07-03 00:11 system -rw-r--r-- 1 vagrant vagrant 42 2012-07-03 00:11 .travis.yml drwxr-xr-x 1 vagrant vagrant 102 2012-07-03 00:11 uploads Whats up with that? My entire config can be found here.

    Read the article

  • how to diagnosis and resolve: /usr/lib64/libz.so.1: no version information available

    - by matchew
    I had a hell of a time installing lxml for python2.7 on centOs5.6. For some background, python2.7 is an alternative installation of python on centOS5.6 which comes with python2.4 installed. it was bulit from source per its instrucitons ./configure make make altinstall However, after about 20 hours of trying I managed to find a workable solution and was able to install lxml. Until, I notice the following error at the top of the interpreter: python2.7: /usr/lib64/libz.so.1: no version information available (required by python2.7) Python 2.7.2 (default, Jun 30 2011, 18:55:26) [GCC 4.1.2 20080704 (Red Hat 4.1.2-50)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> print 'Sheeeeut!' this error is printed out everytime I run a script. For example: $ ./test.py /usr/local/bin/python2.7: /usr/lib64/libz.so.1: no version information available (required by /usr/local/bin/python2.7) the script runs flawlessly, but this error is bothersome. After some digging I have seem to believe I have a wrong version of libz installed, that it is either an older version or built for a different platform. I'm not quite sure how, I've only installed libz through yum, as far as I know. Although, I can't quite remember every little thing I tried in my twenty hours of trying. You may also be intereted in what my lib64 folder looks like, here is some information $ ls -ltrh libz* -rwxr-xr-x 1 root root 84K Jan 9 2007 libz.so.1.2.3 -rwxr-xr-x 1 root root 107K Jan 9 2007 libz.a -rwxr-xr-x 1 root root 154K Feb 22 23:30 libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Apr 20 20:46 libz.so.1 -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jun 30 18:43 libzdb.so.7 -> libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Jul 1 11:35 libz.so -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jul 1 11:35 libzdb.so -> libzdb.so.7.0.2 notice: the items that Say Jul 1st or Jun 30th are from me. I had initially moved these files into a backup folder as they seeemed to be 1. duplicates and 2. had a date after/during my problems I alluded to earlier that I had with lxml One inclination is to completely remove python2.7 and re-install. I think having it install to /usr/local/ was a poor default choice. However, without the make uninstall option being present it seems to be a time consuming task for a solution I am not quite sure would solve my problem.

    Read the article

  • How Do I Properly Run OfflineIMAP in a Crontab

    - by alharaka
    Installed Fedora. # cat /etc/redhat_release | awk ' { print F "> " $0; print ""; }' Fedora release 14 (Laughlin) Installed offlineimap from yum, cuz I'm lazy these days. # yum info offlineimap | awk ' { print F "> " $0; print ""; }' Loaded plugins: langpacks, presto, refresh-packagekit Adding en_US to language list Installed Packages Name : offlineimap Arch : noarch Version : 6.2.0 Release : 2.fc14 Size : 611 k Repo : installed From repo : fedora Summary : Powerful IMAP/Maildir synchronization and reader support URL : http://software.complete.org/offlineimap/ License : GPLv2+ Description : OfflineIMAP is a tool to simplify your e-mail reading. With : OfflineIMAP, you can read the same mailbox from multiple : computers. You get a current copy of your messages on each : computer, and changes you make one place will be visible on all : other systems. For instance, you can delete a message on your home : computer, and it will appear deleted on your work computer as : well. OfflineIMAP is also useful if you want to use a mail reader : that does not have IMAP support, has poor IMAP support, or does : not provide disconnected operation. And, lo and behold, every time I run offlineimap and try to redirect output in a crontab, it does not work. Below is my .offlineimaprc. [general] ui = TTY.TTYUI accounts = Personal, Work maxsyncaccounts = 3 [Account Personal] localrepository = Local.Personal remoterepository = Remote.Personal [Account Work] localrepository = Local.Work remoterepository = Remote.Work [Repository Local.Personal] type = Maildir localfolders = ~/mail/gmail [Repository Local.Work] type = Maildir localfolders = ~/mail/companymail [Repository Remote.Personal] type = IMAP remotehost = imap.gmail.com remoteuser = [email protected] remotepass = password ssl = yes maxconnections = 4 # Otherwise "deleting" a message will just remove any labels and # retain the message in the All Mail folder. realdelete = no [Repository Remote.Work] type = IMAP remotehost = server.company.tld remoteuser = username remotepass = password ssl = yes maxconnections = 4 I have tried TTY.TTYUI, NonInteractive.Quiet and NonInteractive.Basic with different variations. With or without redirection, the crontab entries I try cause problems. $ crontab -l | awk ' { print F "> " $0; print ""; }' */5 * * * * offlineimap >> ~/mail/logs/offlineimap.log 2>&1 */5 * * * * offlineimap I always get the same damn error ERROR: No UIs were found usable!. What am I doing wrong!?

    Read the article

  • Is it possible to configure a CDN so that it will step out of the way for a subset of regional IPs?

    - by rwired
    We have a website which targets customers in China, both expat and local Chinese. We have an ICP license which allows us to host in a datacenter inside China. Internet in China is actually as fast as anywhere else (faster than most places actually), so long as the content is served-up within the boundaries of the Great-Firewall. Anything that crosses the wall is horribly slow. The problem is that most expats have some sort of VPN installed so that they can access all the blocked stuff. What this means is that when they access our site, the traffic first has to go out of China through the firewall to their VPN, and then back in. The performance is terrible, worse than if we were just hosting outside of China directly (which we used to do before the ICP was issued). So I want to use a global CDN to mirror the site automatically, but I only want to deliver the content via the CDN if the user's request IP address is outside of China. Inside China I would like the content to be served by our own server. I also want to be careful with the domain names. We currently use www.xxx.com and www.xxx.cn for language selection purposes, as these perform well in SEO on Google (which the expats use), and Baidu (which the locals use). If possible I would like to avoid having one domain on the outside, and the other on the inside since not all expats use a VPN, and some Chinese speakers also use VPNs. Also some of our legitimate customers in both languages are from outside of China. I also don't want to resort to using something like www2.xxx.com/cn for the outside connection if at all possible, since I have worries about duplicate content and canonical URLs ruining our SEO (unless you know of a quick fix for that). CDNs I'm considering are: Google PageSpeed, CloudFlare, Amazon CloudFront. None of which have datacenters inside China. I have complete control of the .com DNS zone records, but the .cn zones are under the control of the domain issuing body in China. I'm not sure at this time if they would allow even a CNAME to point to an IP outside of China (although I don't see why not). They no longer allow outside registrars like they used to.

    Read the article

  • ASA and cisco vs NSA sonic firewall

    - by Lbaker101
    Currently I’m trying to structure our network to fully support and be redundant with BGP/Multi homing. Our current company size is 40 employees but the major part of that is our Development department. We are a software company and continued connection to the internet is a requirement as 90% of work stops when the net goes down. The only thing hosted on site (that needs to remain up) is our exchange server. Right now i'm faced with 2 different directions and was wondering if I could get your opinions on this. We will have 2 ISPs that are both 20meg up/down and dedicated fiber (so 40megs combined). This is handed off as an Ethernet cable into our server room. ISP#1 first digital ISP#2 CenturyLink we currently have 2x ASA5505s but the 2nd one is not in use. It was there to be a failover and it just needs the security+ license to be matched with the primary device. But this depends on the network structure. I have been looking into the hardware that would be required to be fully redundant and I found that we will either of the following. 2x Cisco 2921+ series routers with failover licenses. They will go in front of the ASAs and either connects in a failover state or 1 ISP into each of the 2921 series routers and then 1 line into each of the ASAs (thus all 4 hardware components will be used actively). So 2x Cisco 2921+ series routers 2x Cisco ASA5505 firewalls The other route 2x SonicWalls NSA2400MX series. 1 primary and the secondary will be in a failover state. This will remove the ASAs from the network and be about 2k cheaper than the cisco route. This also brings down the points of failure because it’s just the 2x sonicwalls It will also allow us to scale all the way up to 200-400 users (depending on their configuration). This also makes so the Sonic walls. So the real question is with the added functionality ect of the sonicwall is there a point in paying so much more to stay the cisco route? Thanks!

    Read the article

  • Monitoring the status of accounts with IT Service providers (ISP, Domain Registrar etc.)

    - by Sholom
    Hi All, Short version: You have software that tells you when your servers power-outlet is down. It monitors multiple servers from one management console, alerts you when something is wrong etc. Does anyone know of software that will let me take the same approach to monitor if the money-outlet (the bill!) is down (not paid) to my IT Services providers (ISP, Domain Registrar, MX Backup service etc). I need a top down, centrally managed service that is capable of sending out alerts. Just like the one that monitors my own exchange server etc. I don't mind if i have to manually enter every payment. Long version: Our very likable but absent minded bookkeeper keeps neglecting to pay our IT vendors on time. Just this past week our internet service was disconnected. Same could happen to many other mission critical accounts (domain registrar, backup MX, anti-virus license, HackerSafe (McAfee secure) service and even an 800 number to name a few). As the sysadmin, i monitor my severs to make sure they are plugged into the power-outlet. I believe i should also monitor my services to make sure they are plugged in to their money-outlet. To compound the problem, when the power goes out someone else will likely notice and notify me. But if a bill is not payed, no one will ever notice until service is lost. Lost as in losing our domain name which would cause a lot more damage then the power failing on our server. [Solution] = [Doesn't work because]: Retrain the bookkeeper = Wishful thinking. Notify my manager = Already have (via email). Protects me, does not solve problem. Fire bookkeeper = What makes you so sure the next one will never forget? Bottom line: Humans are humans and sooner or later something critical will be royally messed up. We need to partner with a machine to help us out here. Anybody have the same problem? What software/solution do you use? I would like software that emails me when a bill is passed due just like i get an email when the power outlet fails. Anyone hear of anything like that? Thanks

    Read the article

  • Use windows 7 inside virtual box,as guest i mean, to create a Windows 7 USB using "Windows 7 USB/DVD Download Tool" ? (Linux as host)

    - by Abel Coto
    I want to download the Windows 7 professional iso (x32), from microsoft, and , i can do two things. Or buy a new burner , as mine doesn't work (i am trying to decide what dvd writer i could buy) or use a usb dongle to copy the iso to it , and install it via usb. I want to install Windows 7 in a netbook that now has debian,and in my pc. I think i have to buy only the license for the pc , as the netbook came with windows 7 preinstalled, so i suppose that i can use that serial to activate the windows , although i don't know how to install windows 7 starter instead of professional (i think if you remove a file from the iso, windows let you choose the edition to install). The problem is that in both pcs there isn't any windows , only debian. My father has a netbook with windows 7 starter, but i think it hasn't antivirus (at least until have the Karspersky Internet security for 3 pcs bought ), and i don't trust to make the usb there , if i don't now that there isn't any virus or malware. So i am trying to find a way of Create a Windows 7 usb installation , to at least be able to install windows 7 in the netbook without a external dvd writer. I know that with dd in linux you can copy a debian.iso to the usb , and then install debian with it (i've done it) using something like dd if=win7.iso of=/dev/sdb, but i don't know if this would work for windows 7 iso,and if dd will correctly copy the iso to the usb. I suppose that if you are able to boot and install windows 7 from the usb , is that the method works,and you can forget of problems later with the windows 7 installation (problems because some files could not be copied or like). So , i remembered that Microsoft created a tool to copy the iso to the usb using windows. So i thought that i could install in my pc , virtual box , as i have VT and 8 GB ram in it, and download the iso from microsoft ,install windows 7 in the virtual machine , and then copy the iso inside the machine , donwload the iso tool, and atach a usb to the pc, connect it to the guest , and use the tool to copy the iso to the USB. But i don't now if is possible to use a virtual machine to do this , or the virtualization could give problems with the usb, or something. I have found some minutes ago this How to make a windows 7 usb flash install media, from linux? The first method (dd) is the one i like more , and i trust more ( i don't now if the second method using ms-sys , works well , and if i can trust it. I understand that a iso is like a .rar , but no compressed,only containing the files ,so mount the iso and cp the data inside perhaps is ok. Although the method i like more is the microsoft one (more because is from microsoft , and i suppose they now what they do ,at least with this usb related thing, than anything). Perhaps worth more to buy a external dvd writer haha ... Should the virtual machine method work ?

    Read the article

  • ASA5505 Novice. Setting up Outside/Inside/and DMZ as Guest Network

    - by GriffJ
    I need a little help in developing a config for our ASA5505. I'm an MCSA/MCITPAS but I don't have a lot of practical cisco experience. Here is what I need help with, we currently have a PIX as our boarder gateway and well it's antiquated and it only has a 50 user license which means I'm constantly clearing local-host throughout the day as people complain. I discovered that the last IT person bought at couple ASA5505s and they've been sitting in the back of a cupboard. So far I've duplicated the configuration from the pix to the asa but as I was going to be going this far I thought I'd go further and remove another old cisco router that was used only for the guest network, I know the asa can do both jobs. So I'm going to paste a scenario I wrote up with the actual IPs changed to protect the innocent. ... Outside Network: 1.2.3.10 255.255.255.248 (we have a /29) Inside Network: 10.10.36.0 255.255.252.0 DMZ Network: 192.168.15.0 255.255.255.0 Outside Network on e0/0 DMZ Network on e0/1 Inside Network on e0/2-7 DMZ Network has DHCPD Enabled. DMZ DHCPD Pool is 192.168.15.50-192.168.15.250 DMZ Network needs to be able to see DNS on Inside Network at 10.10.37.11 and 10.10.37.12 DMZ Network needs to be able to access webmail on inside network at 10.10.37.15 DMZ Network needs to be able to access business website on inside network at 10.10.37.17 DMZ Network needs to be able to access the outside network (access to the internet). Inside Network has NO DHCPD. (dhcp is handled by domain controller) Inside Network needs to be able to see anything on the DMZ network. Inside Network needs to be able to access the outside network (access to the internet). There is some access-list stuff already, some static mapping already. Maps external IPs from our ISP to our inside server IPs static (inside,outside) 1.2.3.11 10.10.37.15 netmask 255.255.255.255 static (inside,outside) 1.2.3.12 10.10.37.17 netmask 255.255.255.255 static (inside,outside) 1.2.3.13 10.10.37.20 netmask 255.255.255.255 Allows access to our Webserver/Mailserver/VPN from the Outside. access-list 108 permit tcp any host 1.2.3.11 eq https access-list 108 permit tcp any host 1.2.3.11 eq smtp access-list 108 permit tcp any host 1.2.3.11 eq 993 access-list 108 permit tcp any host 1.2.3.11 eq 465 access-list 108 permit tcp any host 1.2.3.12 eq www access-list 108 permit tcp any host 1.2.3.12 eq https access-list 108 permit tcp any host 1.2.3.13 eq pptp Here is all the NAT and route stuff I have so far. global (outside) 1 interface global (outside) 2 1.2.3.11-1.2.3.14 netmask 255.255.255.248 nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 1.2.3.9 1

    Read the article

  • Windows Server 2008 R2 bare metal restore to different hardware

    - by S Falken
    Scenario: I have a Windows Server 2008 R2 x64 installation whose main disk drive is now 7 years old and showing signs of age. For the last couple of months it's been displaying increased errors and requirements to run checkdisk. I have successfully created a bare metal restore (BMR) image on a separate data drive on the server, which can be seen from the Windows Recovery console; I tested it by booting to and using the Windows Server installation DVD's recovery utilities. The BMR image includes the system drive with boot partition, system state, and the D:\ drive of the server, which is where I have followed the practice of installing any program that does not require a C:\ installation path. Therefore, the BMR includes both the C:\ and D:\ drives, system state and boot partition. The C:\ drive is a 7-year old Seagate 160GB. The D:\ drive is a rather newer 120GB Western Digital. I have purchased a 128GB solid state Samsung 830 that I want to restore these partitions to, using the BMR. Questions: In the above-referenced article, Microsoft seems to be indicating that I am only able to restore to like-kind hardware, which doesn't help at all and is difficult to believe. Is this really true? I've cleaned these drives up and minimized the size of partition they require. C:\ will need about a 70GB partition, and the data on D:\ will need about 50GB. Will Windows Server backup allow me to restore the BMR to newly-created partitions on the SSD, discarding extra space? I don't need a "how-to": I just need an "is it possible". Justification: Before posting this question, I checked ServerFault articles with the following titles, but none of them were about this exact scenario: Restore SBS 2008 Backup to Same Hardware but Different Disk Configuration Restoring Windows Server 2008 to different hardware - OEM License Restoring II6 server after a hardware failure windows 2008 r2 fail to restore Domain controller failed to restore using windows backup tools How does restore to dissimilar hardware work? Migrating Windows 2008 R2 from a PC to a different PC TFS 2005 Server restore from one hardware to another I also researched Microsoft but only received an oblique answer which was not precisely aimed at my question, at the following URL: http://support.microsoft.com/kb/249694#method3

    Read the article

  • jQuery - Why editable-select list plugin doesn't work with latest jQuery?

    - by Binyamin
    Why editable-select list plugin<select><option>value</option>doesn't work with latest jQuery? editable-select code: /** * Copyright (c) 2009 Anders Ekdahl (http://coffeescripter.com/) * Dual licensed under the MIT (http://www.opensource.org/licenses/mit-license.php) * and GPL (http://www.opensource.org/licenses/gpl-license.php) licenses. * * Version: 1.3.1 * * Demo and documentation: http://coffeescripter.com/code/editable-select/ */ (function($) { var instances = []; $.fn.editableSelect = function(options) { var defaults = { bg_iframe: false, onSelect: false, items_then_scroll: 10, case_sensitive: false }; var settings = $.extend(defaults, options); // Only do bg_iframe for browsers that need it if(settings.bg_iframe && !$.browser.msie) { settings.bg_iframe = false; }; var instance = false; $(this).each(function() { var i = instances.length; if(typeof $(this).data('editable-selecter') == 'undefined') { instances[i] = new EditableSelect(this, settings); $(this).data('editable-selecter', i); }; }); return $(this); }; $.fn.editableSelectInstances = function() { var ret = []; $(this).each(function() { if(typeof $(this).data('editable-selecter') != 'undefined') { ret[ret.length] = instances[$(this).data('editable-selecter')]; }; }); return ret; }; var EditableSelect = function(select, settings) { this.init(select, settings); }; EditableSelect.prototype = { settings: false, text: false, select: false, wrapper: false, list_item_height: 20, list_height: 0, list_is_visible: false, hide_on_blur_timeout: false, bg_iframe: false, current_value: '', init: function(select, settings) { this.settings = settings; this.select = $(select); this.text = $('<input type="text">'); this.text.attr('name', this.select.attr('name')); this.text.data('editable-selecter', this.select.data('editable-selecter')); // Because we don't want the value of the select when the form // is submitted this.select.attr('disabled', 'disabled'); var id = this.select.attr('id'); if(!id) { id = 'editable-select'+ instances.length; }; this.text.attr('id', id); this.text.attr('autocomplete', 'off'); this.text.addClass('editable-select'); this.select.attr('id', id +'_hidden_select'); this.initInputEvents(this.text); this.duplicateOptions(); this.positionElements(); this.setWidths(); if(this.settings.bg_iframe) { this.createBackgroundIframe(); }; }, duplicateOptions: function() { var context = this; var wrapper = $(document.createElement('div')); wrapper.addClass('editable-select-options'); var option_list = $(document.createElement('ul')); wrapper.append(option_list); var options = this.select.find('option'); options.each(function() { if($(this).attr('selected')) { context.text.val($(this).val()); context.current_value = $(this).val(); }; var li = $('<li>'+ $(this).val() +'</li>'); context.initListItemEvents(li); option_list.append(li); }); this.wrapper = wrapper; this.checkScroll(); }, checkScroll: function() { var options = this.wrapper.find('li'); if(options.length > this.settings.items_then_scroll) { this.list_height = this.list_item_height * this.settings.items_then_scroll; this.wrapper.css('height', this.list_height +'px'); this.wrapper.css('overflow', 'auto'); } else { this.wrapper.css('height', 'auto'); this.wrapper.css('overflow', 'visible'); }; }, addOption: function(value) { var li = $('<li>'+ value +'</li>'); var option = $('<option>'+ value +'</option>'); this.select.append(option); this.initListItemEvents(li); this.wrapper.find('ul').append(li); this.setWidths(); this.checkScroll(); }, initInputEvents: function(text) { var context = this; var timer = false; $(document.body).click( function() { context.clearSelectedListItem(); context.hideList(); } ); text.focus( function() { // Can't use the blur event to hide the list, because the blur event // is fired in some browsers when you scroll the list context.showList(); context.highlightSelected(); } ).click( function(e) { e.stopPropagation(); context.showList(); context.highlightSelected(); } ).keydown( // Capture key events so the user can navigate through the list function(e) { switch(e.keyCode) { // Down case 40: if(!context.listIsVisible()) { context.showList(); context.highlightSelected(); } else { e.preventDefault(); context.selectNewListItem('down'); }; break; // Up case 38: e.preventDefault(); context.selectNewListItem('up'); break; // Tab case 9: context.pickListItem(context.selectedListItem()); break; // Esc case 27: e.preventDefault(); context.hideList(); return false; break; // Enter, prevent form submission case 13: e.preventDefault(); context.pickListItem(context.selectedListItem()); return false; }; } ).keyup( function(e) { // Prevent lots of calls if it's a fast typer if(timer !== false) { clearTimeout(timer); timer = false; }; timer = setTimeout( function() { // If the user types in a value, select it if it's in the list if(context.text.val() != context.current_value) { context.current_value = context.text.val(); context.highlightSelected(); }; }, 200 ); } ).keypress( function(e) { if(e.keyCode == 13) { // Enter, prevent form submission e.preventDefault(); return false; }; } ); }, initListItemEvents: function(list_item) { var context = this; list_item.mouseover( function() { context.clearSelectedListItem(); context.selectListItem(list_item); } ).mousedown( // Needs to be mousedown and not click, since the inputs blur events // fires before the list items click event function(e) { e.stopPropagation(); context.pickListItem(context.selectedListItem()); } ); }, selectNewListItem: function(direction) { var li = this.selectedListItem(); if(!li.length) { li = this.selectFirstListItem(); }; if(direction == 'down') { var sib = li.next(); } else { var sib = li.prev(); }; if(sib.length) { this.selectListItem(sib); this.scrollToListItem(sib); this.unselectListItem(li); }; }, selectListItem: function(list_item) { this.clearSelectedListItem(); list_item.addClass('selected'); }, selectFirstListItem: function() { this.clearSelectedListItem(); var first = this.wrapper.find('li:first'); first.addClass('selected'); return first; }, unselectListItem: function(list_item) { list_item.removeClass('selected'); }, selectedListItem: function() { return this.wrapper.find('li.selected'); }, clearSelectedListItem: function() { this.wrapper.find('li.selected').removeClass('selected'); }, pickListItem: function(list_item) { if(list_item.length) { this.text.val(list_item.text()); this.current_value = this.text.val(); }; if(typeof this.settings.onSelect == 'function') { this.settings.onSelect.call(this, list_item); }; this.hideList(); }, listIsVisible: function() { return this.list_is_visible; }, showList: function() { this.wrapper.show(); this.hideOtherLists(); this.list_is_visible = true; if(this.settings.bg_iframe) { this.bg_iframe.show(); }; }, highlightSelected: function() { var context = this; var current_value = this.text.val(); if(current_value.length < 0) { if(highlight_first) { this.selectFirstListItem(); }; return; }; if(!context.settings.case_sensitive) { current_value = current_value.toLowerCase(); }; var best_candiate = false; var value_found = false; var list_items = this.wrapper.find('li'); list_items.each( function() { if(!value_found) { var text = $(this).text(); if(!context.settings.case_sensitive) { text = text.toLowerCase(); }; if(text == current_value) { value_found = true; context.clearSelectedListItem(); context.selectListItem($(this)); context.scrollToListItem($(this)); return false; } else if(text.indexOf(current_value) === 0 && !best_candiate) { // Can't do return false here, since we still need to iterate over // all list items to see if there is an exact match best_candiate = $(this); }; }; } ); if(best_candiate && !value_found) { context.clearSelectedListItem(); context.selectListItem(best_candiate); context.scrollToListItem(best_candiate); } else if(!best_candiate && !value_found) { this.selectFirstListItem(); }; }, scrollToListItem: function(list_item) { if(this.list_height) { this.wrapper.scrollTop(list_item[0].offsetTop - (this.list_height / 2)); }; }, hideList: function() { this.wrapper.hide(); this.list_is_visible = false; if(this.settings.bg_iframe) { this.bg_iframe.hide(); }; }, hideOtherLists: function() { for(var i = 0; i < instances.length; i++) { if(i != this.select.data('editable-selecter')) { instances[i].hideList(); }; }; }, positionElements: function() { var offset = this.select.offset(); offset.top += this.select[0].offsetHeight; this.select.after(this.text); this.select.hide(); this.wrapper.css({top: offset.top +'px', left: offset.left +'px'}); $(document.body).append(this.wrapper); // Need to do this in order to get the list item height this.wrapper.css('visibility', 'hidden'); this.wrapper.show(); this.list_item_height = this.wrapper.find('li')[0].offsetHeight; this.wrapper.css('visibility', 'visible'); this.wrapper.hide(); }, setWidths: function() { // The text input has a right margin because of the background arrow image // so we need to remove that from the width var width = this.select.width() + 2; var padding_right = parseInt(this.text.css('padding-right').replace(/px/, ''), 10); this.text.width(width - padding_right); this.wrapper.width(width + 2); if(this.bg_iframe) { this.bg_iframe.width(width + 4); }; }, createBackgroundIframe: function() { var bg_iframe = $('<iframe frameborder="0" class="editable-select-iframe" src="about:blank;"></iframe>'); $(document.body).append(bg_iframe); bg_iframe.width(this.select.width() + 2); bg_iframe.height(this.wrapper.height()); bg_iframe.css({top: this.wrapper.css('top'), left: this.wrapper.css('left')}); this.bg_iframe = bg_iframe; } }; })(jQuery); $(function() { $('.editable-select').editableSelect( { bg_iframe: true, onSelect: function(list_item) { alert('List item text: '+ list_item.text()); // 'this' is a reference to the instance of EditableSelect // object, so you have full access to everything there // alert('Input value: '+ this.text.val()); }, case_sensitive: false, // If set to true, the user has to type in an exact // match for the item to get highlighted items_then_scroll: 10 // If there are more than 10 items, display a scrollbar } ); var select = $('.editable-select:first'); var instances = select.editableSelectInstances(); // instances[0].addOption('Germany, value added programmatically'); });

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >