Search Results

Search found 22532 results on 902 pages for 'computer hardware'.

Page 85/902 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

  - by Wesley

  Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

  Read the article

• Which equipments should I buy for a laboratory?

  - by Hossein Margani

  Hi every body! I want to create a network of computers for a network laboratory in a university. I want to install windows on them. What is the fastest way for doing this and also which equipments I should buy for this laboratory. I also want to use this network as a computer laboratory, operating system laboratory, programming laboratory, microprocessor laboratory, computer architecture laboratory and software engineering laboratory. I should emphasis that this is a scholastic laboratory. Thanks.

  Read the article

• Side by side madness - running binaries on different computer (with a twist)

  - by sbk

  Here's my configuration: Computer A - Windows 7, MS Visual Studio 2005 patched for Win7 compatibility (8.0.50727.867) Computer B - Windows XP SP2, MS Visual Studio 2005 installed (8.0.50727.42) My project has some external dependencies (prebuilt DLLs - either build on A or downloaded from the Internet), a couple of DLLs built from sources and one executable. I am mostly developing on A and all is fine there. At some point I try to build my project on computer B, copying the prebuilt DLLs to the output folder. Everything builds fine, but trying to start my application I get The application failed to initialize properly (0xc0150002).... The event log contains two of those: Dependent Assembly Microsoft.VC80.CRT could not be found and Last Error was The referenced assembly is not installed on your system. plus the slightly more amusing Generate Activation Context failed for some.dll. Reference error message: The operation completed successfully. At this point I'm trying my Google-Fu, but in vain - virtually all hits are about running binaries on machines without Visual Studio installed. In my case, however, the executables fail to run on the computer they are built. Next step was to try dependency walker and it baffled me even more - my DLLs built from sources on the same box cannot find MSVCR80.DLL and MSVCP80.DLL, however the executable seems to be alright in respect to those two DLLs i.e. when I open the executable with dependency walker it shows that the MSVC?80.DLLs can be found, but when I open one of my DLLs it says they cannot. That's where I am completely out of ideas what to do so I'm asking you, dear stackoverflow :) I admit I'm a bit blurry on the whole side-by-side thing, so general reading on the topic will also be appreciated.

  Read the article

• What PSU is usually used in mini-ITX cases/chassis?

  - by Subaru Tashiro

  The mini-ITX computer will be a general use computer. Not a dedicated HTPC or Home server. In general use mini-ITX cases, what PSU form factor is usually used? I understand that some case manufacturers provide custom built PSU to fit their case but I prefer to get the ones that use a PSU that follows standard form factors in case a replacement is needed. For example, what PSU fits into general purpose cases by Lian Li? Am I to assume that smaller PSU form factors also affect the possible maximum output?

  Read the article

• Motherboard running rather hot while gaming

  - by I take Drukqs

  Case: Antec 1200 Mobo: Gigabyte GA-X58A-UD3R CPU: Intel i7 950 (stock cooler) GPU: EVGA GeForce 570 GTX RAM: 2x 2 GB (4 GB total) DDR3 dual-channel Corsair OS: Windows 7 Home Premium 64-bit This is my first build and it's brand new. I had no problems putting it all together in a few hours one evening and I consider myself to be pretty good with computers. Not to brag or anything like that! Just saying I've been fiddling with them since I was in diapers and I have a good amount of experience under my belt, just not with certain things yet. Recently while playing many of the latest games maxed out without a hitch my motherboard has been running hot and like anyone who's ever built a computer it scares the life out of me. I checked HWMonitor and saw that my motherboard sometimes reached temperatures of around 52 - 78c (the number 78 obviously being what's scaring me). I was wondering if such a temperature is normal and if not what the problem could be. Air flow in my case is phenomenal and besides having to ship back a faulty GPU and reseat my CPU my first build has been a very large success which I am enjoying tremendously. There is literally almost no dust in my case due to it being very new as previously mentioned and my RAM sticks are in the correct slots for dual-channel mode. My cable management is pretty great in my opinion with only cables from my PSU lingering in the bottom of the case. At any given opportunity I ran my cables behind my mobo. Air flow should definitely not be a problem because my CPU only goes up to about 60c and my GPU only goes up to about 80c. Thank you very much in advance.

  Read the article

• Start program on usb hardware plugin

  - by petebob796

  Is there a way to detect when a specific device is plugged into a usb port, what I would like to happen is when I plug my laptop into my docking station it run up several apps to account for my different keyboard, mouse and monitors. Specifically I have an issue with some software for my G15 keyboard stopping media player closing properly. Hopefully in .NET but if not any suggestions appreciated.

  Read the article

• Two different subwoofers aren't working on my machine or my phone

  - by Philluminati

  I have speakers that come with my computer. Two small desktop speakers and a subwoofer with a base volume control on the back. It's worked for years. I was listening to Spotify on my speakers as loud they would possibly go and with the base turned up to max and suddenly the subwoofer stopped working. I've plugged the speakers into my Android HTC Desire Z handset and again, the desktop speakers play music but the subwoofer doesn't (even after fiddling with the volume control). So I figured I'd broken it. I went to Amazon and bought a replacement one. I bought this one: http://www.amazon.co.uk/dp/B002N46YD8/ref=pe_217191_31005151_dp_1 but it doesn't work either, on either my desktop nor my Android phone. I had a play with alsamixer and the LFE and center controls are switched on and the speakers are okay... but still no base. Am I unlucky enough to bought a new subwoofer which is already broken out of the box or is there something else which is wrong and I could look into please? Are there any other tests which I could perform to see if the problem is me or not?

  Read the article

• Hardware representation for arrays in VHDL

  - by ahmed elbagoury

  Using VHDL i want to have a some registers that store 16 bit in each one. So i found that VHDL have a built in array,and i want to use it to store 16 bit in each element in iy so i want to know if VHDL map this array to actual registers or not?

  Read the article

• Algorithms for modern hardware?

  - by Jurily

  Once again, I find myself with a set of broken assumptions. The article itself is about a 10x performance gain by modifying a proven-optimal algorithm to account for virtual memory: What good is an O(log2(n)) algorithm if those operations cause page faults and slow disk operations? For most relevant datasets an O(n) or even an O(n^2) algorithm, which avoids page faults, will run circles around it. Are there more such algorithms around? Should we re-examine all those fundamental building blocks of our education? What else do I need to watch out for when writing my own?

  Read the article

• Hard Drive Compatibility with Motherboard

  - by Wesley

  Here are the current specs to put things in context: ECS P4VXASD2+ V5.0 Intel Pentium 4 Northwood 2.8 GHz 2x 512MB PC2100 DDR266 SDRAM Maxtor DiamondMax 10 250 GB PATA (IDE) HDD Gigabyte 52x CD-ROM NVIDIA TNT2 Pro 16 MB OKIA 300W ATX PSU USB bracket Modem PCI Before, I actually had a 300 GB hard drive installed. However, I read the FAQ for the motherboard and discovered that a maximum of 250 GB hard drive was supported. So I ended up finding the one listed above and put that in. However, upon booting up, I reset the BIOS to defaults and auto-detected all the drives installed. The 250 GB came up as something like 251.0 GB. I didn't think much about it until I tried to boot up a Windows XP installation disc. It booted up successfully and run for about a minute before the computer randomly rebooted. I've made sure that all the jumpers and settings are correct and everything has been installed correctly. I've tried running it without the addons and one stick of RAM but still the same thing. What else could be causing this problem?

  Read the article

• Simple electric DC question. Currency consumption

  - by Bobb

  Suppose you have DC power supply and a consumer connected to it (i.e. computer PSU and a hard drive). Suppose PSU which was supplied with the consumer has output 5V 1A. So I assume that the consumer should not consume more than 1A. Suppose the original PSU is broken now and I want to replace it with the one I have which is 5V 10A. My guess is that current is something which depends on the consumer. So if the consumer consumes normally 1A then it will not consume more than that even if it is connected to 10A PSU. In other word - am I right assuming that the consumer will not burn out being connected to a power supply with higher current output? P.S. my understanding is that voltage is something independent from the consumer. If you give it higher voltage it will burn (voltage is from PSU to the consumer). However current must be in opposite - consumer sucks as much current as it need not as much as PSU can provide (of course given that max PSU current is greater than the consumer needs)

  Read the article

• Layman's book for understanding computer networks

  - by srid

  The good thing about books targeting a layman is that it is usually very engaging to read (not dry and boring like, say, school/university books). Charles Petzold's Code: The Hidden Language of Computer Hardware and Software does this for explaining the underlying hardware in computers. Is there a similar book for understanding computer networking?

  Read the article

• Text template or tool for documentation of computer configurations

  - by mjustin

  I regularly write and update technical documentation which will be used to set up a new virtual machine, or to have a lookup for system dependencies in networks with around 20-50 (server-side) computers. At the moment I use OpenOffice Writer with text tables, and create one document per intranet domain. To improve this documentation, I would like to collect some examples to identify areas where my documents can be improved, regarding general structure and content, to make it easy to read and use not only for me but also for technical staff, helpdesk etc. Are there simple text templates (for example for OpenOffice Writer) or tools (maybe database-driven) for structured documentation of a computer configuration? Such a template / tool should provide required and optional configuration sections, like 'operating system', 'installed services', 'mapped network drives', 'scheduled tasks', 'remote servers', 'logon user account', 'firewall settings', 'hard disk size' ... It is not so much low-level hardware docs but more infrastructure / integration information in these documents (no BIOS settings, MAC addresses).

  Read the article

• Simple electric DC question. Current consumption

  - by Bobb

  Suppose you have DC power supply and a consumer connected to it (i.e. computer PSU and a hard drive). Suppose PSU which was supplied with the consumer has output 5V 1A. So I assume that the consumer should not consume more than 1A. Suppose the original PSU is broken now and I want to replace it with the one I have which is 5V 10A. My guess is that current is something which depends on the consumer. So if the consumer consumes normally 1A then it will not consume more than that even if it is connected to 10A PSU. In other word - am I right assuming that the consumer will not burn out being connected to a power supply with higher current output? P.S. my understanding is that voltage is something independent from the consumer. If you give it higher voltage it will burn (voltage is from PSU to the consumer). However current must be in opposite - consumer sucks as much current as it need not as much as PSU can provide (of course given that max PSU current is greater than the consumer needs)

  Read the article

• Bootable dvd installs ubuntu in one computer but not in other...Why? [closed]

  - by SAM

  Possible Duplicate: My computer boots to a black screen, what options do I have to fix it? I have 2 computers, Windows 7 Intel. On one computer Ubuntu boot-able DVD (AMD 64) works properly. But on other computer the same DVD boots OK but when clicked on "Install Ubuntu" a blank screen with blinking cursor(_) appears and it continues just blinking forever. What problem can be there in computer 2? Can it be DVD reader's problem? (Both computers have LG DVD RW) Can there be any problem in DVD? Computer 1 specs: Pentium D 3 GHz Windows 7 32-bit not a 64bit-capable processor still Ubuntu 64bit trial/installer runs... Computer 2 specs: Core i7 2700k Windows 7 32-bit nvidia gtx 560 graphicsCard ...BIG BOSS... still can't run the setup/trial/disk-check/memory-test ?!?!? Is it the problem of graphics card ?!? I also tried burning other dvd which has the same behavour.... AND yes the dvd name is: ubuntu-12.04.1-dvd-amd64.iso Any help is appreciated.

  Read the article

• Books for Computer Networking

  - by Altimet Gaandu

  Hi, I am a student of computer engineering from Vasula University, Somalia. We have a subject called Advanced Computer Networks and the following is the list of recommended books: Text Books: 1. B. A. Forouzan, "TCP/IP Protocol Suite", Tata McGraw Hill edition, Third Edition. 2. N. Olifer, V. Olifer, "Computer Networks: Principles, Technologies and Protocols for Network design", Wiley India Edition, First edition. References: 1. W.Richard Stevens, "TCP/IP Volume1, 2, 3", Addison Wesley. 2. D.E.Comer,"TCP/IPVolumeI and II", PearsonEducation. . 3.W.R. Stevens, "Unix Network Programming", Vol. 1, Pearson Education. 4. J.Walrand, P. Var~fya, "High Performance Communication Networks", Morgan Kaufmann. . 5. A.S.Tanenbaum,"Computer Networks", Pearson Education, Fourth Edition. But we have been unable to find these either in the market or on the internet (read: torrents). Please provide download links to any of these books and oblige. Thanks.

  Read the article

• Recently reloaded computer, now have trailing effect when windows overlap

  - by Tony

  I recently did a clean install of my home machine and I am having a weird graphical error where if I move one window across the top of another it leaves a trail: I have the most recent NVIDIA drivers installed and nothing new is installed on my machine than before the reload (and I never had this issue before). I have two monitors and it happens on both so I'm sure it isn't a hardware issue (the card and my main monitor are also both less than 6 months old) I've also noticed a ripple when scrolling down on web pages which I believe is related. Any ideas what might be causing this and solutions to fix it?

  Read the article

• Is my motherboard failing, or is there some other issue?

  - by ThatGuy

  So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

  Read the article

• Power outage, Server 2K3 remains on "applying computer settings"

  - by syuroff

  My reward for clicking the "test" button in the APC UPS software was that it completely cut the power to my SQL server. The server promptly rebooted, the SQL service is running (verified by the app on another server that queries it), but the GUI has remained on "applying computer settings" for 20 minutes and counting, and it forbids RDC connections. Since SQL is up, it is fulfilling its key role, but it's obviously not right. What step to take next? Wait longer? Hardware is a Dell Poweredge 2850, internal RAID10.

  Read the article

• Is there anything essential to check before powering on a self-built PC for the first time?

  - by Nick F

  I've just put together a computer for the first time. I've found plenty of info online that covered the construction, but now I'm ready - I think - to power it up I'm wondering if there are any checks that I can do to be sure that the machine is safe and ready to turn on. What are the things (if any) that I absolutely must make sure of before turning on? Just to be clear, I'm sure there are many things I could get wrong that would mean the computer won't work properly, but only a few that might cause serious damage. It's really the latter I'm asking for.

  Read the article

• Laptop does not charge old or new battery with Old and New AC adapters.

  - by Jeff

  My Sager computer has been having a strange issue with the charging. For a long time it would be working perfectly as long as I was active on it. After I'd leave idle for a while it would suddenly decide it didn't want to use AC power anymore and would just discharge the battery until it shutdown because of low battery levels. Was not a huge deal to me since I just sent it to standby when done with it and it worked fine. Recently, however, it would not detect AC power while the battery was in. It ran from the battery just fine but until you powered it down, unplugged the battery, then plugged in the AC adapter it would not be on AC. In addition if I plug the battery back in after it's on AC power, it will see it but the battery won't charge though it can still discharge it. This is OS independent. I tried both a replacement battery and a replacement AC adapter. Neither solved my issue. I'm fairly comfortable opening and servicing a laptop but I don't know where to start. I'd like to avoid replacing my system board if possible. Any Ideas?

  Read the article

• What is the cost of running a desktop machine at home?

  - by vinc

  How much does it (roughly) cost to leave my personal home computer running 24/7 for a year? I'm not doing anything unusual; I run a webserver for myself, surf the web, write some code. I don't have any specific specs. So for example there might be the cost of electricity, internet connection, and possibly some other factors that I've overlooked. I'm trying to decide whether it would be a good idea to turn off my computer when I'm asleep and not using it. Is the cost negligible, maybe 1 USD per day, something in between or more?

  Read the article

• What is the best CPU I could get for my old setup?

  - by cmbrnt

  On my current not-so-good desktop computer, I'm currently running an Intel Core 2 Duo E6550-CPU, and I'm thinking of buying a newer one now that these must be cheap on E-bay and the like. Being a software guy, I'd be grateful for any help in identifying what CPUs that would fit my motherboard so I don't buy a processor which won't work with my computer. It might not be worth it however, since the SATA2-drive is currently what's bottlenecking my system, but I'm still curious about what could be done except for buying an SSD-drive. I'm providing screenshots of CPU-Z running, to help with the identification. My CPU- and motherboard info: http://i.imgur.com/YdO8x.png

  Read the article

• Establish SSH Connection Between Two Isolated Machines Using a 3rd System

  - by FurryHead

  I'd like to do the following with Python: Computer 1 starts SSH server (probably using twisted or paramiko) Computer 1 connects to Server 1 (idle connection) Computer 2 connects to Server 1 Server 1 forwards Computer 2's connection to Computer 1 (connection no longer idle) Computer 1 forwards Server 1's connection to listening SSH port (on computer 1) Result being Computer 2 now has a SSH session with Computer 1, almost as if Computer 2 had started a normal SSH session (but with Server 1's IP instead of Computer 1's) I need this because I can't port forward on Computer 1's network (the router doesn't support it).

  Read the article

• What server setup for a small web development company? [closed]

  - by Giordano

  I co-own a company with a friend of mine and we have decided to buy a new server to support our business (our current server is an Asus EEE Box, working great but too limited :) ). I should mention that we are web developers but occasionally we do small-office sys admin. Thus, 99% of time we work on GNU/Linux (mainly Ubuntu) but from time to time we need to setup a Windows environment to assist some customers (e.g. setup a temporary SQL Server 2008). Our requirements: Low budget: we don't want the cheapest solution out there but we can't afford to spend too much. Budget could be ~1000-1500€ (before VAT) Robustness: we would like to setup a RAID array and maybe have an external disk where we can store backups Virtualization: we need to be able to setup few servers for development. The scenario is something like this (~8 appliances running in parallel): Redmine + GIT server Bacula server FTP server 3-4 virtual appliances that could be set up on demand to test our applications or support a customer. The appliances could be: LAMP, Tomcat+PostgreSQL, SQL Server Support: if something breaks down it shouldn't be too difficult to find a replacement. Now, given the main requirements, there are some doubts we need to clarify: Do you suggest to buy a prepackaged solution (for example a customized Dell PowerEdge T110 or T310) or to assemble the server by ourselves (buy the separate components)? What RAID configuration do you suggest? I was thinking of RAID1 (probably cheaper) or RAID5. should we buy a hardware RAID controller or is it ok to use a software RAID (mdadm)? In case, which controller do you suggest? What processor do you suggest (Intel Xeon, i3, i5, i7, AMD)? How much RAM? (I was thinking at least 8GB, ~1GB per appliance) What virtualization software do you recommend? VMWare seems to be the best choice, but what about XEN or KVM? We don't want to buy licenses at the moment so we would like to consider only free options. What OS do you recommend? We know Ubuntu, Debian, Gentoo very well (we would like to use Ubuntu Server), however it seems a lot of people goes for CentOS. Thanks in advance if you can help us with this! It's our first "serious" server so many doubts popped up :) Please feel free to add further recommendations if you have some to share ;) Have a nice day

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >