Search Results

Search found 30569 results on 1223 pages for 'computer problems'.

Page 85/1223 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• Slow LAN transfer from 3rd party computer

  - by Chris

  Hi Everyone, I've got an odd problem that I'm not really sure where to start the troubleshooting process. I have a 'server' with Windows Server 2008R2 (64-bit) installed and it has a couple of hard drives. If I Remote Desktop into the server and transfer files from one HD to the other, all it fine. If however, I use my workstation (Windows 7 64bit) and open up a shared resource on the server and transfer a file from one hard drive on the server to another HD on the server (not using Remote Desktop, just Windows explorer/Network places), the transfer crawls... It takes about 5mins to discover files/calculate the transfer and then starts transferring at speeds like 56KB/s - 200KB/s. Both machines have Marvel GigE network ports with a TrendNet 8-port green GigE switch. I've set Jumbo packets to 9K on both machines...

  Read the article

• Problems configuring logstash for email output

  - by user2099762

  I'm trying to configure logstash to send email alerts and log output in elasticsearch / kibana. I have the logs successfully syncing via rsyslog, but I get the following error when I run /opt/logstash-1.4.1/bin/logstash agent -f /opt/logstash-1.4.1/logstash.conf --configtest Error: Expected one of #, {, ,, ] at line 23, column 12 (byte 387) after filter { if [program] == "nginx-access" { grok { match = [ "message" , "%{IPORHOST:remote_addr} - %{USERNAME:remote_user} [%{HTTPDATE:time_local}] %{QS:request} %{INT:status} %{INT:body_bytes_sent} %{QS:http_referer} %{QS:http_user_agent}” ] } } } output { stdout { } elasticsearch { embedded = false host = " Here is my logstash config file input { syslog { type => syslog port => 5544 } } filter { if [program] == "nginx-access" { grok { match => [ "message" , "%{IPORHOST:remote_addr} - %{USERNAME:remote_user} \[% {HTTPDATE:time_local}\] %{QS:request} %{INT:status} %{INT:body_bytes_sent} %{QS:http_referer} %{QS:http_user_agent}” ] } } } output { stdout { } elasticsearch { embedded => false host => "localhost" cluster => "cluster01" } email { from => "[email protected]" match => [ "Error 504 Gateway Timeout", "status,504", "Error 404 Not Found", "status,404" ] subject => "%{matchName}" to => "[email protected]" via => "smtp" body => "Here is the event line that occured: %{@message}" htmlbody => "<h2>%{matchName}</h2><br/><br/><h3>Full Event</h3><br/><br/><div align='center'>%{@message}</div>" } } I've checked line 23 which is referenced in the error and it looks fine....I've tried taking out the filter, and everything works...without changing that line. Please help

  Read the article

• Computer name not appearing on network

  - by stib

  I can connect to other computers on my home network (ubuntu + OSX machines) using the IP address, but I can't connect using the netbios name. On the mac the name appears in Finder but if I try to connect (goconnect to server smb://[email protected]) it doesn't work, while smb://[email protected] does. Same with ssh, ping and afp between the macs. This is a intermittent problem. It has worked in the past.

  Read the article

• datawind ubislate 9ci tablet computer hanging on boot

  - by user57924

  I am new to this forum. I purchased a new tablet Datawind Ubislate 9ci. It is a 9 inch no-bluetooth tablet. Details: Android 4.1.1 Rock chip RK2928 KERNEL linux version 3.0.36 I was trying to install CWM through mobile odin and ROM manager but my tablet was not supported so i downloaded build.prop editor from google play and changed it to some other cwm recognizable model viz. Samsung, nexus etc. When i was doing the above mentioned procedure, suddenly my tablet is coming up to bootloading and hanging there only and not opening i went to recovery and tried to do wipe data factory reset but failed to get opened after boot android system recovery(3e) has the following options 1)reboot system now 2)apply update from ADB 3)apply update from external storage 4)update rkimage from external storage 6)wipe data factory reset 7)wipe cache partition 8)recovery system from back up i tried to do wipe data factory reset 2-3 times but still hanging at boot i had not made any back up before this bootloop and also tried hard reset by pressing needle at the back please somebody help me to get rid of this problem and also tell me how to unlock bootloader thank you

  Read the article

• DNS problems on CentOS fresh install

  - by Rick Koshi

  I'm having some DNS issues on a new box I'm installing with CentOS 6.2. I am able to look up names using nslookup, dig, or host. I am able to ping machines by name or by IP address. However, when I try other tools, such as ssh, wget, or yum, they are unable to resolve names. For example: # wget http://www.google.com --2012-03-08 14:48:06-- http://www.google.com/ Resolving www.google.com... failed: Name or service not known. wget: unable to resolve host address `www.google.com' # ssh www.google.com ssh: Could not resolve hostname www.google.com: Name or service not known # ping -c 1 www.google.com PING www.l.google.com (74.125.113.106) 56(84) bytes of data. 64 bytes from vw-in-f106.1e100.net (74.125.113.106): icmp_seq=1 ttl=46 time=43.6 ms --- www.l.google.com ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 59ms rtt min/avg/max/mdev = 43.665/43.665/43.665/0.000 ms # host www.google.com www.google.com is an alias for www.l.google.com. www.l.google.com has address 74.125.113.99 www.l.google.com has address 74.125.113.103 www.l.google.com has address 74.125.113.104 www.l.google.com has address 74.125.113.105 www.l.google.com has address 74.125.113.106 www.l.google.com has address 74.125.113.147 My /etc/nsswitch.conf file is the default, including this (standard) line: hosts: files dns /etc/resolv.conf is as set up by DHCP: ; generated by /sbin/dhclient-script nameserver 192.168.1.254 192.168.1.254 is a working DNS server (my DSL modem, working for years with other machines) Anyone know why ping would work, but ssh/wget would fail? Per NcA's suggestion, I tried changing /etc/resolv.conf to point to 8.8.8.8. Oddly enough, this does make it work. Obviously, my DSL modem is responding to DNS requests in some way that some parts of Linux's resolution system don't like. Looking at the tcpdump, I am unable to see what the difference is. Certainly, both servers are sending the same addresses. Here's the output from tcpdump -nn -X with the server set to the DNS server on the DSL modem. It's clearly replying with the correct addresses, but ssh/wget don't seem happy with it for some reason: 15:53:52.133580 IP 192.168.1.254.53 > 192.168.1.2.54836: 33157 7/0/0 CNAME www.l.google.com., A 74.125.115.105, A 74.125.115.106, A 74.125.115.147, A 74.125.115.99, A 74.125.115.103, A 74.125.115.104 (148) 0x0000: 4500 00b0 e33a 0000 ff11 53b1 c0a8 01fe E....:....S..... 0x0010: c0a8 0102 0035 d634 009c 7528 8185 8180 .....5.4..u(.... 0x0020: 0001 0007 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 0001 0001 c00c 0005 gle.com......... 0x0040: 0001 0007 acd0 0008 0377 7777 016c c010 .........www.l.. 0x0050: c02c 0001 0001 0000 0001 0004 4a7d 7369 .,..........J}si 0x0060: c02c 0001 0001 0000 0001 0004 4a7d 736a .,..........J}sj 0x0070: c02c 0001 0001 0000 0001 0004 4a7d 7393 .,..........J}s. 0x0080: c02c 0001 0001 0000 0001 0004 4a7d 7363 .,..........J}sc 0x0090: c02c 0001 0001 0000 0001 0004 4a7d 7367 .,..........J}sg 0x00a0: c02c 0001 0001 0000 0001 0004 4a7d 7368 .,..........J}sh 15:53:52.135669 IP 192.168.1.254.53 > 192.168.1.2.54836: 65062- 0/0/0 (32) 0x0000: 4500 003c e33b 0000 ff11 5424 c0a8 01fe E..<.;....T$.... 0x0010: c0a8 0102 0035 d634 0028 98f9 fe26 8000 .....5.4.(...&.. 0x0020: 0001 0000 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 001c 0001 gle.com..... I'm not enough of an expert to know if this is malformed in some way, but ping seems to do the right thing with it. For comparison, here's the same thing when querying 8.8.8.8: 15:57:27.990270 IP 8.8.8.8.53 > 192.168.1.2.49028: 59114 7/0/0 CNAME www.l.google.com., A 74.125.113.105, A 74.125.113.103, A 74.125.113.106, A 74.125.113.147, A 74.125.113.104, A 74.125.113.99 (148) 0x0000: 4500 00b0 5530 0000 2f11 6453 0808 0808 E...U0../.dS.... 0x0010: c0a8 0102 0035 bf84 009c 39f8 e6ea 8180 .....5....9..... 0x0020: 0001 0007 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 0001 0001 c00c 0005 gle.com......... 0x0040: 0001 0001 516a 0008 0377 7777 016c c010 ....Qj...www.l.. 0x0050: c02c 0001 0001 0000 0116 0004 4a7d 7169 .,..........J}qi 0x0060: c02c 0001 0001 0000 0116 0004 4a7d 7167 .,..........J}qg 0x0070: c02c 0001 0001 0000 0116 0004 4a7d 716a .,..........J}qj 0x0080: c02c 0001 0001 0000 0116 0004 4a7d 7193 .,..........J}q. 0x0090: c02c 0001 0001 0000 0116 0004 4a7d 7168 .,..........J}qh 0x00a0: c02c 0001 0001 0000 0116 0004 4a7d 7163 .,..........J}qc 15:57:28.018909 IP 8.8.8.8.53 > 192.168.1.2.49028: 31984 1/1/0 CNAME www.l.google.com. (102) 0x0000: 4500 0082 7b1b 0000 2f11 3e96 0808 0808 E...{.../.>..... 0x0010: c0a8 0102 0035 bf84 006e c67e 7cf0 8180 .....5...n.~|... 0x0020: 0001 0001 0001 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 001c 0001 c00c 0005 gle.com......... 0x0040: 0001 0001 517f 0008 0377 7777 016c c010 ....Q....www.l.. 0x0050: c030 0006 0001 0000 0258 0026 036e 7334 .0.......X.&.ns4 0x0060: c010 0964 6e73 2d61 646d 696e c010 0016 ...dns-admin.... 0x0070: 91f3 0000 0384 0000 0384 0000 0708 0000 ................ 0x0080: 003c .< I still don't know why the server's reply is adequate for ping but not for ssh/wget. If anyone has ideas, I'd be happy to hear them. For now, though, I can either refer to an outside DNS server or set up my own server on the new box. It's a workaround that seems like it should be unnecessary, but will allow me to proceed.

  Read the article

• Computer has black screen and freezes when starting up

  - by gary

  when turning pc on i get black screen and windows freezes ,i think the processor not working properly. I have Windows XP Home Edition.

  Read the article

• Package problems after upgrade

  - by Dan

  I installed a new upgrade on ubuntu which seemed to fail near the end. Now I'm being told that an error has occurred and to please run apt-get to see what's wrong. After some further tries with that I eventually gave up. It seems there's a left over latex package(?) somewhere and I can't seem to get rid of or fix it. Here's an example: blank@ubuntu:~$ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: tex-common : Breaks: texlive-common (< 2010) but 2009-15 is installed texlive-base : Depends: texlive-binaries (>= 2012.20120516) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-doc-base : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-extra-utils : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed texlive-font-utils : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-generic-recommended : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-base : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-base-doc : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-extra : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-extra-doc : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-recommended : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-recommended-doc : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-luatex : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-pictures : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-pictures-doc : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-pstricks : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-pstricks-doc : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed zlib1g : Breaks: texlive-binaries (< 2009-12) but 2009-11ubuntu2 is installed zlib1g:i386 : Breaks: texlive-binaries (< 2009-12) but 2009-11ubuntu2 is installed E: Unmet dependencies. Try using -f. I've seen similar errors on the site here, but not close enough that i could get it fixed. Any help would be great, Thanks

  Read the article

• incorrect password when computer is locked

  - by cyntaxx

  Hi there, I have running a Windows XP SP3 Machine and I can't login after I have locked my Workstation. I changed my password and installed last Updates from Microsoft last Friday. When Windows comes up, there is no problem to login. But after I locked it, it tells me that my password is wrong. I pushed the client again into the domain, but doesn't help. Thanks, cyntaxx

  Read the article

• Problems executing check_mysql plugin

  - by Brian

  I'm attempting to test out the check_mysql plugin for Nagios using the command line. It works great when I'm just checking localhost but when I try to specify a different server (using the -H argument) I keep getting the following error message: CRITICAL - Unable to connect to mysql://nagios_user@{remoteServerHostname}/ - Access denied for user 'nagios_user'@'{localServerHostName}' (using password: YES) It looks like it's trying to connect to the database using the localhost server even though I've specified a different host name. I've already set up this user on the remote database and they have correct permissions. I'm just trying to figure out why the script keeps inserting the localhost server name instead of the remote one.

  Read the article

• Apache permission Problems

  - by swg1cor14

  Ok all my files and folders are set as owner of vsftpd:nogroup. FTP program can upload and create and do everything. But when I use the PHP command mkdir, I get a Permission Denied even though the folder its creating it in is set to chmod 777. IF i set the base folder to user www-data and group www-data, PHP mkdir will work. However, I can't use FTP to delete or upload to that folder. /uploads is base folder. I use PHP mkdir to create a directory in there: if (!is_dir($_SERVER['DOCUMENT_ROOT'] . "/uploads/" . $_REQUEST['clientID'] . '/video/')) { @mkdir($_SERVER['DOCUMENT_ROOT'] . "/uploads/" . $_REQUEST['clientID'] . '/video/', 0777); } If /uploads is vsftpd:nogroup then PHP mkdir will give a Permission Denied error. If /uploads is www-data:www-data then PHP mkdir WILL work, but I cant continue to FTP anything in that folder that was just created. If /uploads is vsftpd:www-data then PHP mkdir will give a Permission Denied error. How can I create a directory with PHP and still be able to access it via FTP?

  Read the article

• Lock down computer when on a domain

  - by Chad Moran

  Is there a way to disable all users except your user from logging into your PC when you're part of a Windows Server 2008 Active Directory domain?

  Read the article

• Sudden problems with iptables not running

  - by Fourjays

  I've got a sudden issue with iptables not running on my CentOS 5.8/DirectAdmin XenVPS. All I have done today is install PHP APC and run an update (although I admittedly didn't pay much attention today - I usually do). Iptables has been running fairly smoothly since I installed it over 6 months ago. Basically when I try to run iptables -L it tells me: iptables v1.3.5: can't initialize iptables table `filter': iptables who? (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. I've looked around and tried a few things and it appears that maybe my kernel doesn't have the modules loaded? I've been reading this and tried the two commands they suggest to no avail. Except there does appear to be a mismatch on one bit of output: -bash-3.2# cd /lib/modules -bash-3.2# ls 2.6.18-194.32.1.el5xen 2.6.18-238.5.1.el5xen 2.6.18-274.7.1.el5xen 2.6.39.1-cs-domU 2.6.18-238.12.1.el5xen 2.6.18-238.9.1.el5xen 2.6.37.2-cs-domU 3.0.1-cs-domU -bash-3.2# depmod -a WARNING: Couldn't open directory /lib/modules/2.6.18-274.18.1.el5xen: No such file or directory FATAL: Could not open /lib/modules/2.6.18-274.18.1.el5xen/modules.dep.temp for writing: No such file or directory Does this mean the versions are out of sync? If so, what are my next steps to getting this fixed? As you can probably tell I am still learning how to manage my server so please be very clear in all advice. Many thanks :)

  Read the article

• Brand New Monitor Won't Get Input From Computer

  - by HollerTrain

  I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

  Read the article

• Browsing \\computer\share fails, but net use \\computer\share works?

  - by JMD

  I've had mixed results with using Windows Explorer to browse remote file shares. The setup: I'm at work on Windows XP SP3 Files are at home on Windows XP SP3 Two separate VPNs are available to access my PC at home corporate OpenVPN (10.1.2.3) a Hamachi/LogMeIn connection (5.1.2.3) With respect to my problem, it doesn't matter which IP I use. They both perform exactly the same way: I expect that if I open Windows Explorer and type in \\10.1.2.3\Shared I should be interrupted with a challenge for credentials, and then be able to interact with the files in the share. However, I just get that annoying dialog, "Windows cannot find '\10.1.2.3\Shared' Check the spelling and try again, or try searching for the item ..." However, I can take that exact same computername/sharename and with net use I can: net use * \\10.1.2.3\Shared * /user:homecomputername\username with this result: Type the password for \\5.69.83.158\C$: Drive Z: is now connected to \\5.69.83.158\C$. The command completed successfully. I can then access the files in Z: in Windows Explorer which was my original intent. Even after Z: is already mapped and the credentials are cached I still cannot bring up \\10.1.2.3\Shared in Windows Explorer. Why does the latter work, but not the former? Edit: Other services work fine, such as RDP. (I have a problem in which I can't SSH home, but I'll consider that separately.)

  Read the article

• Postfix + SASLAUTHD + MySQL authentication problems

  - by Or W

  I've been trying to sort this out for the past 6 hours or so, this is the error message I'm facing (Running CentOS x64): /var/log/maillog: Jun 22 20:42:49 ptroa postfix/smtpd[10130]: warning: SASL authentication failure: Password verification failed Jun 22 20:42:49 ptroa postfix/smtpd[10130]: warning: bzq-79-177-192-133.red.bezeqint.net[79.177.192.133]: SASL PLAIN authentication failed: authentication failure Jun 22 20:42:49 ptroa postfix/smtpd[10130]: warning: bzq-79-177-192-133.red.bezeqint.net[79.177.192.133]: SASL LOGIN authentication failed: authentication failure /var/log/messages: Jun 22 20:15:38 ptroa saslauthd[9401]: do_auth : auth failure: [user=myuser] [service=smtp] [realm=domain.com] [mech=pam] [reason=PAM auth error] I have dovecot installed as well and I'm able to receive emails via the MySQL authentication. The problem is when I'm trying to use SMTP to send out emails. Some config files: /etc/postfix/main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = Server Message biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = domain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html message_size_limit = 30720000 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination virtual_create_maildirsize = yes virtual_maildir_extended = yes proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_cano$ virtual_transport = dovecot dovecot_destination_recipient_limit = 1 /etc/default/saslauthd: START=yes DESC="SASL Authentication Daemon" NAME="saslauthd" MECHANISMS="pam" MECH_OPTIONS="" THREADS=5 OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd -r" /etc/pam.d/smtp: #%PAM-1.0 #auth include password-auth #account include password-auth auth required pam_mysql.so user=mail_admin passwd=password host=127.0.0.1 db=mail table=users usercolumn=email passwdcolumn=password crypt=1 verbose=1 account sufficient pam_mysql.so user=mail_admin passwd=password host=127.0.0.1 db=mail table=users usercolumn=email passwdcolumn=password crypt=1 verbose=1

  Read the article

• attach two hdds to a computer having 500W smps

  - by Gaurav Sharma

  I have a desktop system installed with a 250 GB hdd (seagate sata II) this system is having a power supply of 500W (not sure if it is 650W but not more than that) the power supply is a local brand. Will it be safe to attach a second 250 GB sata II hdd on the same system. Safe in the sense that the system may not fall short of power at any time. My system's config is as follows Core2Duo processor Mercury cabinet having an additional fan (small one) sata dvd writer 52X windows xp sp 2 ASUS motherboard (intel G965 express chipset) If the above specified power supply is not sufficient for above configuration of system then please suggest the appropriate power supply (including watts)

  Read the article

• Did I miss anything when checking for passwords? [migrated]

  - by Keltari

  There's a bit of a story to this, so bear with me... I am looking for a new job and came across a posting for a computer forensics position. Its not really my field, but I thought I would apply anyway, just for fun. To make a longer story shorter, they want you to uncover as many passwords as you can find. I downloaded an image and dd'd it to a thumbdrive. The only thing visible was a text file, which contained a password. I knew there had to be more, so I used an undelete utility and found 2 deleted files. First there was another text file with a password - easy. The other was a .pst file which I mounted into outlook. There were some emails with passwords, as well as an email with an image. Another email has a link to a stegenography site. Obviously, there was a file hidden in the image, so I went to the website and downloaded the stegenography decoder. I had to try some of the passwords I had found to get the file to decrypt, and sure enough, there was another text file with a password. I called it a day at that point. Did I miss any other methods?

  Read the article

• CentOS VM, NTP synchronization problems

  - by Spirit

  We have three CentOS 5.9 VMs on an ESX3.5 host. Because of the nature of the services we provide it is required that the NTP time is synchronized and the time is correct on all three of them. However one of them constantly drifts back each day for about 66 sec. So far none of us seems to understand as why is this happening. We included the possibility that the VM may be somehow pulling the time from the host, however all of the three VMs have identical configuration settings and they did not have VMware tools installed. Although I realize that this is probably a question of an internal matter and not to ask for on a forum, I would appreciate if anyone of you knows some CentOS NTP diagnostic routines that will help me to diagnose the problem and find a reliable solution. I thank you for the assistance.

  Read the article

• Gigabyte GA-Z77X-D3H MB problems

  - by Hans

  I installed a new system last week. I've some issues with it. The system consists of a: Gigabyte GA-Z77X-D3H with F9 BIOS (latest) Intel Core i5 3570K proccesor Sapphire Radeon HD7850 2x 8GB Corsair 1600MHz memory OCZ Vertex 2 120G SSD Connected peripherals : 2 Samsung 940BF (1 via DVI on GFX card, 1 via an Displayport to DVI adapter) 1 Dell U2312HM monitor (displayport) Dell USB Hub (monitor) Wired mouse, wireless keyboard (logitech) Logitch G25 wheel Canon MP800 printer Okay, my issues are the following: if I plug in 1 or more monitor at DisplayPort during boot, most of the time it won't boot properly. I get an empty message screen of UEFI: only the header GIGABYTE DUEL BIOS appears. The system reboots itself, turns on for a few seconds (no video) and then reboots again. Now it starts all over again. This repeats until I remove all displayport monitors. Windows boots, and I can use them when I replug them. The graphics card has been running fine for a few weeks on an older system (intel Q6600). Another issue is; if I plug in my G25 steering wheel, the UEFI BIOS is inaccessible. It either gives the same empty UEFI screen, or the BIOS screen is rendering but crashes half way (so pieces of text and graphics are missing, and it has crashed). If I remove the G25, all is fine. To verify the graphics card is OK and the motherboard is causing these issues, I tried an NVIDIA 8800GT graphics card. This hasn't got Displayport, but it also cannot boot the BIOS with the G25 wheel plugged in. The PC also refuses to go into or out of standby. It just hangs when going into standby, and in other occasions (when it does succesfully do so) get out of standby. Power supply is OCZ StealthXStream 600W. Proccesor is 25 - 30C idle, ~55C stressed (Scythe Mugen 2). I am really puzzled what can be done to resolve this. I am not really waiting for an RMA request (otherwise I will return the MB for another type), because it will likely mean I have to wait very long before I get a replacement. Anyone else with a similar experience on this board/chipset or can help me troubleshoot this?

  Read the article

• Problems creating service using sc.exe

  - by Shoko

  I have this command to create a service: sc create svnserve binpath="\"C:\Program Files (x86)\Subversion\bin\svnserve.exe\" --service --root C:\SVNRoot" displayname="Subversion" depend=tcpip start=auto obj="NT AUTHORITY\LocalService" Unfortunately, it seems not to work, even though the syntax is correct. When I run it, I get the usage instructions (which I guess is a way of telling me that I've supplied incorrect arguments, although I have no idea what incorrect argument I might have supplied). Can anyone help me out of my difficulty? Thanks!

  Read the article

• See network computer description in Explorer

  - by John Gardeniers

  When viewing the list of network computers in Windows Explorer on a Win 7 machine there appears to be no way of readily seeing the description field, which makes that pretty well useless. I believe this problem started with Vista but I'm seeing it for the first time because I was fortunate enough to skip over Vista. We're currently rolling out Win 7 on new boxes and although I'm changing the naming system to something more sensible, the old boxes have names such as FWS01, FWS02, etc. Managing a network of computers with such names is made more difficult when you can't readily see who's machine each one is. Googling the problem brought up a workaround involving creating a shortcut on an XP machine and copying that to the Win 7 box but that's a long way from ideal. Is there some kind of hack that can be applied to machines, the operator of which needs to be able to see the description field?

  Read the article

• Problems Installing slapd On Ubuntu Server 11.10

  - by Zach Dziura

  I know that there's a Ubuntu-specific StackExchange website, but I thought that I'd ask here because it's a server-specific question. If I'm wrong in my logic... Well, you people are better at this than I am! O=) On with the show! I'm in the process of installing Oracle Database 11g R2 Standard Edition onto Ubuntu Server 11.10. I found a guide on the Oracle Support Forums that walks you through the process fairly easily. Unfortunately, I'm running into issues installing one particular dependency: slapd. When I go to install it, I get this error message: (Reading database ... 64726 files and directories currently installed.) Unpacking slapd (from .../slapd_2.4.25-1.1ubuntu4.1_amd64.deb) ... Processing triggers for man-db ... Processing triggers for ufw ... Processing triggers for ureadahead ... Setting up slapd (2.4.25-1.1ubuntu4.1) ... Usage: slappasswd [options] -c format crypt(3) salt format -g generate random password -h hash password scheme -n omit trailing newline -s secret new password -u generate RFC2307 values (default) -v increase verbosity -T file read file for new password Creating initial configuration... Loading the initial configuration from the ldif file () failed with the following error while running slapadd: str2entry: invalid value for attributeType olcRootPW #0 (syntax 1.3.6.1.4.1.1466.115.121.1.15) slapadd: could not parse entry (line=1051) dpkg: error processing slapd (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: slapd E: Sub-process /usr/bin/dpkg returned an error code (1) After much Google searches and forum trolling, I have yet to find a definitive answer as to what's going wrong. The error messages seem straight forward enough, but I have no idea how to debug this. Can anyone offer some assistance? Again, if I'm asking in the wrong place, I apologize. If I'm indeed asking properly, then thank you for any and all help!

  Read the article

• Postfix, saslauthd, mysql, smtp authentication problems

  - by italiansoda

  Trying to get authentication on my mail server (ubuntu 10.04) running but am having trouble. I have a server with postfix for smtp setup, imap server with courier setup. My postfix authentication is using cyrus (I haven't tried dovecot really) saslauth. The user name and password is stored in a MySql database. Logging in with imap-ssl works on a remote client (thunderbird), and I can read my mail. I can't get the SMTP side working, and have focused the issue down to saslauth. Testing with testsaslauthd -u 'username' -p 'passowrd' -s smtp returns connect() : Permission denied the password in the database is encrypted and I guess this testsaslauthd will take a plain text password and encrypt it. Looking for someone to walk me through getting this working. Im new to the mail server, and have never got one fully working. Thanks. Ask me which log files I should look at/post, which tests to run, permissions to check.

  Read the article

• Could today's windows update have caused boot problems?

  - by gjvdkamp

  I have a 64 bit box that is dual boot Windows 7 64bit and Ubuntu. I booted into windows today and saw the 'updates ready' sign on the shutdown button so I clicked to let it install. It took a while to install 2 updates. Then I rebooted but now it doesn't get past the motherboard splash screen. So I don't even get the disks found messages or let alone the prompt to choose windows or Linux. Cold this be caused by the updates? Seems weird for a windows patch to have consequences beyond the windows os, but it seems unlikely to be a coincidence Thanks, Gert-jan

  Read the article

• Problems set-up Single Sign-On using Kerberos authentication

  - by user1124133

  I need for Ruby on Rail application set authentication via Active Directory using Kerberos authentication. Some technical information: I are using Apache installed mod_auth_kerb In httpd.conf I added LoadModule auth_kerb_module modules/mod_auth_kerb.so In /etc/krb5.conf I added following configuration [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] default_realm = EU.ORG.COM dns_lookup_realm = false dns_lookup_kdc = false ticket_lifetime = 24h forwardable = yes [realms] EU.ORG.COM = { kdc = eudc05.eu.org.com:88 admin_server = eudc05.eu.org.com:749 default_domain = eu.org.com } [domain_realm] .eu.org.com = EU.ORG.COM eu.org.com = EU.ORG.COM [appdefaults] pam = { debug = true ticket_lifetime = 36000 renew_lifetime = 36000 forwardable = true krb4_convert = false } When I test kinit validuser and enter password then authentication is successful. klist returns: Ticket cache: FILE:/tmp/krb5cc_600 Default principal: [email protected] Valid starting Expires Service principal 02/08/13 13:46:40 02/08/13 23:46:47 krbtgt/[email protected] renew until 02/09/13 13:46:40 Kerberos 4 ticket cache: /tmp/tkt600 klist: You have no tickets cached In application Apache configuration I added IfModule mod_auth_kerb.c> Location /winlogin> AuthType Kerberos AuthName "Kerberos Loginsss" KrbMethodNegotiate off KrbAuthoritative on KrbVerifyKDC off KrbAuthRealms EU.ORG.COM Krb5Keytab /home/crmdata/httpd/apache.keytab KrbSaveCredentials off Require valid-user </Location> </IfModule> I restarted apache Now some tests: When I try to access application from Win7, I got pop-up message box, with text: Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentification without a secure connection) When I enter valid credentials then my application opens successfully, and all works fine. Questions: Is ok that for user pop-ups such windows? If I use NTLM authentication then there no such pop-up. I checked IE Internet Options and there 'Enable Integrated Windows Authentication' is checked. Why IE try to send username and password to application apache? If I correct to understand then Windows self must make authentication via Active Directory using Kerberos protocol. When I try to access application from Win7 and I enter incorrect credentials to pop-up message box Application say Authentication failed (this is OK) In apache error log I see: [error] [client 192.168.56.1] krb5_get_init_creds_password() failed: Client not found in Kerberos database But now I cannot get possibility to enter valid credentials, only when I restart IE I can get again pop-up box. What could be incorrect or missing in my Kerberos setup? I read in some blog post that probably something is needed to be done in Active Directory side. What exactly?

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >