Search Results

Search found 3324 results on 133 pages for 'gb'.

Page 85/133 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • VMWare ESX installation on sata disk

    - by ilansch
    I have a PC with Gigabyte H77 motherboard with Intel I5-3550 CPU 8 GB RAM 1600MHz and a 500GB Harddisk (7200RPM) - WD Sata III disk I wish to install esx on it and run some virtual machines on it. not alot, something like 2-3 VMs. My hardisk is Sata, is it possible to install ESX Server on it ? I am not worried about loading issues. When i try loading the installation it writes it cannot detect my disk (since its not SCSI disk). How can i bypass this ? or find a solution. thanks

    Read the article

  • Installing linux mint in one partition

    - by sha404
    So, I have a disk with a MBR setup(image below). I've managed to have 50 GB unallocated space for intalling Linux Mint 14. And I want to keep the current windows OS too(but don't want the Mint inside windows). Now I've seen in some tutorials that Linux Mint needs several partitions for bootloader, swap, & home. I don't like to have so many partitions & maybe MBR stuff won't let me create more than one now. So, is it possible to install Linux Mint in one partition only? If it is really impossible than what's the minimum number? & how can I accomplish that? Thanks in advance.

    Read the article

  • Windows 7 sata disk not recognized after wake up from sleep state [closed]

    - by Gabber
    My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results.

    Read the article

  • Do I really need Microsoft Updates?

    - by Tony Wong
    When I install a fresh copy of Windows XP Home (I bought it from the store.. not a copy), my PC rocks like lightening speed. But when I start installing all the updates, patches & less .NET 4.0 client (as the .NET 4.0 Client seems to bring machine to slow crawl). The PC starts to slow down.. like there are more resources to watch or something is happening in the background. So could I not get away with an awesome virus protector and an awesome firewall set-up and avoid all the patches? The machine I have is a quad 4, 4 GB RAM and 2.3 GHz process. Tons of room and the machine can run several applications at one time.. but when the updates happen.. it's s-l-o-w!

    Read the article

  • What hash should be used to ensure file integrity?

    - by Corey Ogburn
    It's no secret that large files offered up for download often are coupled with their MD5 or SHA-1 hash so that after you download you can verify the file's integrity. Are these still the best algorithms to use for this? Obviously these are very popular hashes that potential downloaders would have easy access to. Ignoring that factor, what hashes have the best properties for being used for this? For example, bcrypt would be horrible for this. It's designed to be slow. That would suck to use on your 7.4 GB dual layer OS ISO you just downloaded when a 12 letter password might take up to a second with the right parameters.

    Read the article

  • Motherboard RAM question.

    - by winterwindz
    Firstly I'm new at this. Not a very computer-ish person. So I very much apologize if this is not the right place, but here it goes.. My Motherboard is an Asus P5LD2-SE. I'm running in Win 7 Ultimate 32-bit(x86) OS, 1GB RAM (2x512 MB). I'm planning to upgrade my OS to 64-bit and because I know my Motherboard is a dual-channel, I bought a dual-channel 2 GB RAM (2 pcs). My question is; am I still able use my old RAM ones, since it is 4 slots..? Which in the end will show 5GB. Is it possible? Thank you for your time. =)

    Read the article

  • Windows 7 sata disk not recognized after wake up from sleep state

    - by Gabber
    My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results. I also tried all the suggestions from this question Why doesn't Windows 7 wake up from sleep?. Still no results.

    Read the article

  • How to configure an ASUS motherboard.

    - by Absolute0
    I have an ASUS P7P55-M motherboard running with an Intel Core i5-750 processor and 4 GB RAM with 1600 MT/s speed. For some reason the default settings of the motherboard make all the components run at half their optimums. I have switched to the "D.O.C.P." profile and supposedly everything is as it's supposed to be (verified with CPU-Z). There is also an "X.M.P." profile and a manual one. Are either of the DOCP or XMP safe to go with? I wouldn't use the manual mode as I would likely mess something up real bad. XMP seems to be more memory oriented.

    Read the article

  • HELP! Free space not reclaimed after online resizing ext4 in Ubuntu 9.10

    - by TiansHUo
    My root partition was filling up, with only 500 mbs left, I wanted to resize my root partition from 20 Gb to 40Gb So I resized my partition by using these steps: Using Gparted to resize another partition to give space for the EXT4 Using fdisk, deleting the root partition (on /dev/sda2), and creating it again using the new size resize2fs /dev/sda2 Updating grub2 But now the problem is that although I can boot in my new partition and the new partition shows it is 40Gb, but the free size was still 500mb. So I booted from a LiveCD and checked with e2fsck -p /dev/sda2, it reported clean. So I added the -f flag (force check), still, the drive is full.

    Read the article

  • Getting around the FAT32 4GB file size limit

    - by Aesir
    I recently purchased a 32GB USB 3 stick that was formatted FAT32. I plugged it into my computer and attempted to copy a film onto it, the file was over 4GB however and it would not let me copy the file across because of the 4GB file size limit imposed by FAT32. After some googling I found that I could format my USB stick to have an exFAT format which would mean I could put files onto the stick greater than 4GB in size and the drive would work on both my Mac and my PC. The problem with this solution is that my PS3 cannot detect the USB stick when it is formatted with exFAT. I would like to know if there is a way I can have my USB stick formatted so it can have files greater than 4 GB and work on my PC, Mac and PS3.

    Read the article

  • RAID--0 " TWO " DRIVES SSD ONLY Should I use on-board / Software RAID OR a RAID Card / Control

    - by Wes
    I am looking at going with a TWO Drive Only SSD RAID-0 Configuration And was wondering if I would get better performance / Speed from the Use of a RAID Controller / Card Verses just using the Software RAID on my Mother Board. I have herd conflicting reports , Again I only Plan on Running " 2 " SSD Drives in RAID-0 Config I have No- problem spending the extra money for a good controller but only if I am going to benifit performance wise , Otherwise if there is no notable Gain I will just use the Software RAID that my HP-180-T came with Intel- 3.33 GHZ , 6-Core , 12-GB of DDR-3. I have a huge External drive for All Storage and am not concerned about Data loss just looking for pure speed. And if a Controller will benifit my performance Wht type of card would one suggest?

    Read the article

  • Understanding why a 450W power supply is destroying my ATX motherboards but not mATX

    - by T. Webster
    Maybe I'm missing something really obvious here, but after going through 3 new motherboards in trying to build my new machine, I'm finally certain that the 450W power supply I bought has been destroying them. It seems like it should be simple: just connect the connectors where they fit and switch the thing on. But today after hooking it to my ASUS Sabertooth 990FX TUF Series Motherboard and switching it on, I could see and smell the smoke coming out of the motherboard. What I don't get is why I can hook this same 450W power supply up to my mATX motherboard and not run into the same problem. What am I missing here? Where on the box or manual is this? (I have 8x2 GB RAM, AMD FX-4100 3.6GHz CPU, 1 512MB ATI graphics card, 1 WD 7200 RPM SATA hard drive. )

    Read the article

  • How to debug high memory usage by registry?

    - by bkr
    I have a windows 2008 r2 server running ADFS2 and some web apps that is having issues with low memory. Digging around I found that the 5.5 GB were being used under Kernel Memory (paged). Further digging with Poolmon, I discovered that the majority of that (5GB+) was being used by CM - configuration manager. Also known as the registry. I'm really now sure how to tell why the registry is using so much memory however, or how to release it? Looking at the physical registry files they don't appear that large. EDIT #1 Using the powershell script @ http://jdhitsolutions.com/blog/2011/05/get-registry-size-and-age/ confirms what I saw looking at the physical registry files, that they're relatively small Computername : (removed) Status : OK CurrentSize : 67 MaximumSize : 2048 FreeSize : 1981 PercentFree : 96.728515625 Created : 4/1/2011 11:38:02 AM Age : 454.23:41:28.2540682

    Read the article

  • Intel Rapid Start Driver Reinstallation doesn't work?

    - by elegantonyx
    I recently had to reformat my entire drive and reinstall Windows 7. Something that bothers me is that when I was downloading the Intel Rapid Start driver (I have a Lenovo Ideapad Y480, and it comes standard with the Rapid Start) and tried to install it, the installer claimed that my system did not meet the requirements in order to install, when it was previously installed by the OEM. My startup times have increased from 21 seconds to log-in screen to 50 seconds. Please help... Specs: Lenovo Ideapad Y480 Intel Core i7-3610 Ivy Bridge (quad-core) Nvidia Geforce 640M LE with 2gb VRAM 8GB RAM 1TB hard drive, 32 GB SSD (OEM installed)

    Read the article

  • Which Linux variant to install on VirtualBox?

    - by Rohit
    Answer to one of my previous post suggested me to use VirtualBox for Sandbox experiments with malware files. I installed VirtualBox and now it demands a bootable CD to install the OS. I want Linux to be installed in it. I guess Debian or Ubuntu are the most popular variant. I want an ISO image that creates a bootable CD or a single DVD with that Linux variant and should include only the basic installation not much features. It should fit in at least 3 or 3.5 GB. Which one is more compatible with VirtualBox?

    Read the article

  • Red Hat 5.4 slow processing

    - by yucefrizk
    I'm running Red Hat Linux 5.4 on HP DL580 server with 16 processors and 64 GB of RAM. I'm connecting to the server remotely through SSH. after entering the password, it takes time to return the command line, if I click ctrl+c during this time, I'll have the command line prompt but not the correct bash prompt (I have to run bash to pass to my correct prompt). I tried to install Apache on the server, ./configure took 4 hours to finish instead of 1 or two minutes, Oracle installation same behavior. Server Disks are mirrored using RAID controller. any idea what could be the reason of this slowness?

    Read the article

  • Is there a way to have a working search bar in Explorer with Windows Search Service disabled?

    - by Desmond Hume
    I had to disable Windows Search Service (turn it off in Windows Features) for the reason that it was constantly using the hard drive in an excessive way (maybe because I've got very large quantities of files on my PC), noticeably slowing down my computer, and the Windows.edb database file grew way too large, about 2.5 GB in size. But the side-effect of it is that now the search bar is gone from any Explorer window and I miss this useful feature. So my question is, is there a way to stop Windows Search Service torturing my hard drive and still being able to search for files and folders directly from Explorer, perhaps using some third-party software?

    Read the article

  • Reclaiming deleted disk space from file vault

    - by cbrulak
    I have my main user account encrypted with file vault. After deleting some data (like 20 GB) my free space on the hard drive hasn't change (yes I emptied the trash, confirmed that the files are actually gone, etc,etc). I also tried "erasing free space" in the disk utility app. I logged off, and rebooted and so far that space hasn't been reclaimed. I'm assuming file vault or disk utility has some method of reclaiming but I can't find it. Any ideas?

    Read the article

  • Blue screen MEMORY_MANAGEMENT on Windows 7 Enterprise

    - by Lucas Kauffman
    I'm running a machine (MSI GT 70) with 32 GB ram as a mobile server. It seems that at random points in time it will BSOD with as message MEMORY_MANAGEMENT. So the first thing I did was do several memtests, but they did not give away any defective modules. I'm a bit clueless at the moment as it just seems to happen at random points in time giving me little or no indication of what might be wrong. I opened up the dumps with BSODviewer, they just seem to point to the windows kernel. I tried reinstalling Windows but the behavior remains the same.

    Read the article

  • Alternatives to Crashplan for VPS?

    - by Chloe
    I use SFTP Net Drive to mount a remote VPS so I can back it up. However, it's taken over 3+ days to scan! I ran 'ls -lR' from my desktop over the mounted network drive and it only took about 5m to list all the files! There are only about 5000 files and 2 GB. I know Crashplan can run headless on the VPS itself, but that sounds like a pain to set up, and it takes so much memory on the server. The VPS doesn't have a lot of memory to spare - it's less than my desktop. Is there another program that can communicate with a Crashplan backup protocol and has a command line interface? backup /home

    Read the article

  • Writing to external drive runs out of space prematurely

    - by steve
    I have a USB 2.0, 500 GB HDD. I am writing a bunch of data to it, that I previously recovered from the drive. I have formatted the drive in exFAT, since the drive will be used with Windows and OSX. At first, I tried using Windows explorer to move the files over to the drive (about 160 GiB worth) but after copying about 30% of the data (according to TeraCopy), Windows Explorer reported the drive as out of space, and that it was completely full. WinDirStat only showed the size of data that had been copied over... Where did this extra space go? Why is there a 300+ GiB discrepancy between the usage reported by the files and what Explorer sees?

    Read the article

  • additional space on microsoft's cloud

    - by Narcolapser
    Question: How do you get more space on Live Mesh/Live Sync? Info: I'm looking into corporate data backs for my company's dealers. each dealership will have data back up demands ranging from 100mb to 20gb. We are an entirely Microsoft solution so when I was asked to look into back ups, of course I would look to Micro$oft. even if we have too buy this space, is there a way to get more space on Live Mesh/Live Sync (Live Mync hehe)? The 5 gb that Mesh provides or the 2gb that Sync provides isn't enough for our larger dealerships. The 25gb that SkyDrive provides is probably enough for now, but I don't know if it will be in the future. However, SkyDrive is not automatically synced. So it isn't a viable option anyway. ~n

    Read the article

  • Office365 how to recover entire dumpster

    - by TryTryAgain
    I need to recover an entire deleteditem aka dumpster folder. Using Get-MailboxStatistics [email protected] | Select *Deleted* I am able to see 2.2+GB of data = 9,700+ emails. How can I recover all of these? I have seen Search-Mailbox "Discovery Search Mailbox" -SearchQuery <search query> -TargetMailbox <user> -TargetFolder inbox which I assume would work, but only for single searches and items. I need a batch solution. Any Office 365 PowerShell gurus?

    Read the article

  • Apps not starting on Mac OS X Lion

    - by KPS
    I have a strange problem, some apps that I download do not launch. There are 2 scenarios The application starts but keeps bouncing, once I click the bouncing icon in the tray it disappears. The process also closes in activity monitor The application fails to start, how ever many times I launch it, it refuses. The process does not even show up in activity monitor What I have done so far to resolve: Repaired permissions Clear all cache/temp using CleanMyMac Used DiskWarrior via OS and not during boot Additional Info: Model Name: MacBook Pro Model Identifier: MacBookPro5,2 Processor Name: Intel Core 2 Duo Processor Speed: 2.8 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache: 6 MB Memory: 8 GB Bus Speed: 1.07 GHz Boot ROM Version: MBP52.008E.B05 SMC Version (system): 1.42f4

    Read the article

  • Understanding ESXi and Memory Usage

    - by John
    Hi, I am currently testing VMWare ESXi on a test machine. My host machine has 4gigs of ram. I have three guests and each is assigned a memory limit of 1 GB (and only 512 MB reserved). The host summary screen shows a memory capacity of 4082.55 MB and a usage of 2828 MB with two guests running. This seems to make sense, two gigs for each VM plus an overhead for the host. 800MB seems high but that is still reasonable. But on the Resource Allocation Screen I see a memory capacity of 2356 MB and an available capacity of 596 MB. Under the configuration tab, memory link I see a physical total of 4082.5 MB, System of 531.5 MB and VM of 3551.0 MB. I have only allocated my VMs for a gig each, and with two VMs running they are taking up almost two times the amount of ram allocated. Why is this, and why does the Resource Allocation screen short change me so much?

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >