Search Results

Search found 2396 results on 96 pages for 'inner'.

Page 85/96 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• Exchange IMAP4 connector - Error Event ID 2006

  - by MikeB

  A couple of users in my organisation use IMAP4 to connect to Exchange 2007 (Update rollup 9 applied) because they prefer Thunderbird / Postbox clients. One of the users is generating errors in the Application Log as follows: An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 1523, user "*******", folder *********, subject: "******", date: "*******" into MIME format. Microsoft.Exchange.Data.Storage.ConversionFailedException: Message content has become corrupted. ---> System.ArgumentException: Value should be a valid content type in the form 'token/token' Parameter name: value at Microsoft.Exchange.Data.Mime.ContentTypeHeader.set_Value(String value) at Microsoft.Exchange.Data.Storage.MimeStreamWriter.WriteHeader(HeaderId type, String data) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeStreamAttachment(StreamAttachmentBase attachment, MimeFlags flags) --- End of inner exception stack trace --- at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeStreamAttachment(StreamAttachmentBase attachment, MimeFlags flags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeAttachment(MimePartInfo part, MimeFlags flags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimePart(MimePartInfo part, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeParts(List`1 parts, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimePart(MimePartInfo part, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ImapItemConverter.<>c__DisplayClass2.<WriteMimePart>b__0() at Microsoft.Exchange.Data.Storage.ConvertUtils.CallCts(Trace tracer, String methodName, String exceptionString, CtsCall ctsCall) at Microsoft.Exchange.Data.Storage.ImapItemConverter.WriteMimePart(ItemToMimeConverter converter, MimeStreamWriter writer, OutboundConversionOptions options, MimePartInfo partInfo, MimeFlags conversionFlags) at Microsoft.Exchange.Data.Storage.ImapItemConverter.GetBody(Stream outStream) at Microsoft.Exchange.Data.Storage.ImapItemConverter.GetBody(Stream outStream, UInt32[] indices) From my reading around it seems that the suggestion is to ask users to log in to Outlook / OWA and view the messages there. However, having logged in as the users myself, the messages cannot be found either through searching or by browsing the folder detailed in the log entry. The server returns the following error to the client: "The message could not be retrieved using the IMAP4 protocol. The message has not been deleted and may be accessible using either Microsoft Outlook or Microsoft Office Outlook Web Access. You can also try contacting the original sender of the message to find out about the contents of the message. Retrieval of this message will be retried when the server is updated with a fix that addresses the problem." Messages were transferred in to Exchange by copying them from the old Apple Xserve, accessed using IMAP. So my question, finally: 1. Is there any way to get the IMAP Exchange connector to rebuild its cache of messages since it doesn't seem to be pulling them directly from the MAPI store? 2. Alternatively, if there is no database, any ideas on why these messages don't appear in Outlook or OWA would be gratefully received. Many thanks, Mike

  Read the article

• Convert Java program to C

  - by imicrothinking

  I need a bit of guidance with writing a C program...a bit of quick background as to my level, I've programmed in Java previously, but this is my first time programming in C, and we've been tasked to translate a word count program from Java to C that consists of the following: Read a file from memory Count the words in the file For each occurrence of a unique word, keep a word counter variable Print out the top ten most frequent words and their corresponding occurrences Here's the source program in Java: package lab0; import java.io.File; import java.io.FileReader; import java.util.ArrayList; import java.util.Calendar; import java.util.Collections; public class WordCount { private ArrayList<WordCountNode> outputlist = null; public WordCount(){ this.outputlist = new ArrayList<WordCountNode>(); } /** * Read the file into memory. * * @param filename name of the file. * @return content of the file. * @throws Exception if the file is too large or other file related exception. */ public char[] readFile(String filename) throws Exception{ char [] result = null; File file = new File(filename); long size = file.length(); if (size > Integer.MAX_VALUE){ throw new Exception("File is too large"); } result = new char[(int)size]; FileReader reader = new FileReader(file); int len, offset = 0, size2read = (int)size; while(size2read > 0){ len = reader.read(result, offset, size2read); if(len == -1) break; size2read -= len; offset += len; } return result; } /** * Make article word by word. * * @param article the content of file to be counted. * @return string contains only letters and "'". */ private enum SPLIT_STATE {IN_WORD, NOT_IN_WORD}; /** * Go through article, find all the words and add to output list * with their count. * * @param article the content of the file to be counted. * @return words in the file and their counts. */ public ArrayList<WordCountNode> countWords(char[] article){ SPLIT_STATE state = SPLIT_STATE.NOT_IN_WORD; if(null == article) return null; char curr_ltr; int curr_start = 0; for(int i = 0; i < article.length; i++){ curr_ltr = Character.toUpperCase( article[i]); if(state == SPLIT_STATE.IN_WORD){ article[i] = curr_ltr; if ((curr_ltr < 'A' || curr_ltr > 'Z') && curr_ltr != '\'') { article[i] = ' '; //printf("\nthe word is %s\n\n",curr_start); if(i - curr_start < 0){ System.out.println("i = " + i + " curr_start = " + curr_start); } addWord(new String(article, curr_start, i-curr_start)); state = SPLIT_STATE.NOT_IN_WORD; } }else{ if (curr_ltr >= 'A' && curr_ltr <= 'Z') { curr_start = i; article[i] = curr_ltr; state = SPLIT_STATE.IN_WORD; } } } return outputlist; } /** * Add the word to output list. */ public void addWord(String word){ int pos = dobsearch(word); if(pos >= outputlist.size()){ outputlist.add(new WordCountNode(1L, word)); }else{ WordCountNode tmp = outputlist.get(pos); if(tmp.getWord().compareTo(word) == 0){ tmp.setCount(tmp.getCount() + 1); }else{ outputlist.add(pos, new WordCountNode(1L, word)); } } } /** * Search the output list and return the position to put word. * @param word is the word to be put into output list. * @return position in the output list to insert the word. */ public int dobsearch(String word){ int cmp, high = outputlist.size(), low = -1, next; // Binary search the array to find the key while (high - low > 1) { next = (high + low) / 2; // all in upper case cmp = word.compareTo((outputlist.get(next)).getWord()); if (cmp == 0) return next; else if (cmp < 0) high = next; else low = next; } return high; } public static void main(String args[]){ // handle input if (args.length == 0){ System.out.println("USAGE: WordCount <filename> [Top # of results to display]\n"); System.exit(1); } String filename = args[0]; int dispnum; try{ dispnum = Integer.parseInt(args[1]); }catch(Exception e){ dispnum = 10; } long start_time = Calendar.getInstance().getTimeInMillis(); WordCount wordcount = new WordCount(); System.out.println("Wordcount: Running..."); // read file char[] input = null; try { input = wordcount.readFile(filename); } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); System.exit(1); } // count all word ArrayList<WordCountNode> result = wordcount.countWords(input); long end_time = Calendar.getInstance().getTimeInMillis(); System.out.println("wordcount: completed " + (end_time - start_time)/1000000 + "." + (end_time - start_time)%1000000 + "(s)"); System.out.println("wordsort: running ..."); start_time = Calendar.getInstance().getTimeInMillis(); Collections.sort(result); end_time = Calendar.getInstance().getTimeInMillis(); System.out.println("wordsort: completed " + (end_time - start_time)/1000000 + "." + (end_time - start_time)%1000000 + "(s)"); Collections.reverse(result); System.out.println("\nresults (TOP "+ dispnum +" from "+ result.size() +"):\n" ); // print out result String str ; for (int i = 0; i < result.size() && i < dispnum; i++){ if(result.get(i).getWord().length() > 15) str = result.get(i).getWord().substring(0, 14); else str = result.get(i).getWord(); System.out.println(str + " - " + result.get(i).getCount()); } } public class WordCountNode implements Comparable{ private String word; private long count; public WordCountNode(long count, String word){ this.count = count; this.word = word; } public String getWord() { return word; } public void setWord(String word) { this.word = word; } public long getCount() { return count; } public void setCount(long count) { this.count = count; } public int compareTo(Object arg0) { // TODO Auto-generated method stub WordCountNode obj = (WordCountNode)arg0; if( count - obj.getCount() < 0) return -1; else if( count - obj.getCount() == 0) return 0; else return 1; } } } Here's my attempt (so far) in C: #include <stdio.h> #include <stdlib.h> #include <stdbool.h> #include <string.h> // Read in a file FILE *readFile (char filename[]) { FILE *inputFile; inputFile = fopen (filename, "r"); if (inputFile == NULL) { printf ("File could not be opened.\n"); exit (EXIT_FAILURE); } return inputFile; } // Return number of words in an array int wordCount (FILE *filePointer, char filename[]) {//, char *words[]) { // count words int count = 0; char temp; while ((temp = getc(filePointer)) != EOF) { //printf ("%c", temp); if ((temp == ' ' || temp == '\n') && (temp != '\'')) count++; } count += 1; // counting method uses space AFTER last character in word - the last space // of the last character isn't counted - off by one error // close file fclose (filePointer); return count; } // Print out the frequencies of the 10 most frequent words in the console int main (int argc, char *argv[]) { /* Step 1: Read in file and check for errors */ FILE *filePointer; filePointer = readFile (argv[1]); /* Step 2: Do a word count to prep for array size */ int count = wordCount (filePointer, argv[1]); printf ("Number of words is: %i\n", count); /* Step 3: Create a 2D array to store words in the file */ // open file to reset marker to beginning of file filePointer = fopen (argv[1], "r"); // store words in character array (each element in array = consecutive word) char allWords[count][100]; // 100 is an arbitrary size - max length of word int i,j; char temp; for (i = 0; i < count; i++) { for (j = 0; j < 100; j++) { // labels are used with goto statements, not loops in C temp = getc(filePointer); if ((temp == ' ' || temp == '\n' || temp == EOF) && (temp != '\'') ) { allWords[i][j] = '\0'; break; } else { allWords[i][j] = temp; } printf ("%c", allWords[i][j]); } printf ("\n"); } // close file fclose (filePointer); /* Step 4: Use a simple selection sort algorithm to sort 2D char array */ // PStep 1: Compare two char arrays, and if // (a) c1 > c2, return 2 // (b) c1 == c2, return 1 // (c) c1 < c2, return 0 qsort(allWords, count, sizeof(char[][]), pstrcmp); /* int k = 0, l = 0, m = 0; char currentMax, comparedElement; int max; // the largest element in the current 2D array int elementToSort = 0; // elementToSort determines the element to swap with starting from the left // Outer a iterates through number of swaps needed for (k = 0; k < count - 1; k++) { // times of swaps max = k; // max element set to k // Inner b iterates through successive elements to fish out the largest element for (m = k + 1; m < count - k; m++) { currentMax = allWords[k][l]; comparedElement = allWords[m][l]; // Inner c iterates through successive chars to set the max vars to the largest for (l = 0; (currentMax != '\0' || comparedElement != '\0'); l++) { if (currentMax > comparedElement) break; else if (currentMax < comparedElement) { max = m; currentMax = allWords[m][l]; break; } else if (currentMax == comparedElement) continue; } } // After max (count and string) is determined, perform swap with temp variable char swapTemp[1][20]; int y = 0; do { swapTemp[0][y] = allWords[elementToSort][y]; allWords[elementToSort][y] = allWords[max][y]; allWords[max][y] = swapTemp[0][y]; } while (swapTemp[0][y++] != '\0'); elementToSort++; } */ int a, b; for (a = 0; a < count; a++) { for (b = 0; (temp = allWords[a][b]) != '\0'; b++) { printf ("%c", temp); } printf ("\n"); } // Copy rows to different array and print results /* char arrayCopy [count][20]; int ac, ad; char tempa; for (ac = 0; ac < count; ac++) { for (ad = 0; (tempa = allWords[ac][ad]) != '\0'; ad++) { arrayCopy[ac][ad] = tempa; printf("%c", arrayCopy[ac][ad]); } printf("\n"); } */ /* Step 5: Create two additional arrays: (a) One in which each element contains unique words from char array (b) One which holds the count for the corresponding word in the other array */ /* Step 6: Sort the count array in decreasing order, and print the corresponding array element as well as word count in the console */ return 0; } // Perform housekeeping tasks like freeing up memory and closing file I'm really stuck on the selection sort algorithm. I'm currently using 2D arrays to represent strings, and that worked out fine, but when it came to sorting, using three level nested loops didn't seem to work, I tried to use qsort instead, but I don't fully understand that function as well. Constructive feedback and criticism greatly welcome (...and needed)!

  Read the article

• Adobe Photoshop Vs Lightroom Vs Aperture

  - by Aditi

  Adobe Photoshop is the standard choice for photographers, graphic artists and Web designers. Adobe Photoshop Lightroom  & Apple’s Aperture are also in the same league but the usage is vastly different. Although Photoshop is most popular & widely used by photographers, but in many ways it’s less relevant to photographers than ever before. As Lightroom & Aperture is aimed squarely at photographers for photo-processing. With this write up we are going to help you choose what is right for you and why. Adobe Photoshop Adobe Photoshop is the most liked tool for the detailed photo editing & designing work. Photoshop provides great features for rollover and Image slicing. Adobe Photoshop includes comprehensive optimization features for producing the highest quality Web graphics with the smallest possible file sizes. You can also create startling animations with it. Designers & Editors know how important precise masking is, PhotoShop lets you do that with various detailing tools. Art history brush, contact sheets, and history palette are some of the smart features, which add to its viability. Download Whether you’re producing printed pages or moving images, you can work more efficiently and produce better results because of its smooth integration across other adobe applications. Buy supporting layer effects, it allows you to quickly add drop shadows, inner and outer glows, bevels, and embossing to layers. It also provides Seamless Web Graphics Workflow. Photoshop is hands-down the BEST for editing. Photoshop Cons: • Slower, less precise editing features in Bridge • Processing lots of images requires actions and can be slower than exporting images from Lightroom • Much slower with editing and processing a large number of images Aperture Apple Aperture is aimed at the professional photographer who shoots predominantly raw files. It helps them to manage their workflow and perform their initial Raw conversion in a better way. Aperture provides adjustment tools such as Histogram to modify color and white balance, but most of the editing of photos is left for Photoshop. It gives users the option of seeing their photographs laid out like slides or negatives on a light table. It boasts of – stars, color-coding and easy techniques for filtering and picking images. Aperture has moved forward few steps than Photoshop, but most of the editing work has been left for Photoshop as it features seamless Photoshop integration. Aperture Pros: Aperture is a step up from the iPhoto software that comes with every Mac, and fairly easy to learn. Adjustments are made in a logical order from top to bottom of the menu. You can store the images in a library or any folder you choose. Aperture also works really well with direct Canon files. It is just $79 if you buy it through Apple’s App Store Moving forward, it will run on the iPad, and possibly the iPhone – Adobe products like Lightroom and Photoshop may never offer these options It is much nicer and simpler user interface. Lightroom Lightroom does a smashing job of basic fixing and editing. It is more advanced tool for photographers. They can use it to have a startling photography effect. Light room has many advanced features, which makes it one of the best tools for photographers and far ahead of the other two. They are Nondestructive editing. Nothing is actually changed in an image until the photo is exported. Better controls over organizing your photos. Lightroom helps to gather a group of photos to use in a slideshow. Lightroom has larger Compare and Survey views of images. Quickly customizable interface. Simple keystrokes allow you to perform different All Lightroom controls are kept available in panels right next to the photos. Always-available History palette, it doesn’t go when you close lightroom. You gain more colors to work with compared to Photoshop and with more precise control. Local control, or adjusting small parts of a photo without affecting anything else, has long been an important part of photography. In Lightroom 2, you can darken, lighten, and affect color and change sharpness and other aspects of specific areas in the photo simply by brushing your cursor across the areas. Photoshop has far more power in its Cloning and Healing Brush tools than Lightroom, but Lightroom offers simple cloning and healing that’s nondestructive. Lightroom supports the RAW formats of more cameras than Aperture. Lightroom provides the option of storing images outside the application in the file system. It costs less than photoshop. Download Why PhotoShop is advanced than Lightroom? There are countless image processing plug-ins on the market for doing specialized processing in Photoshop. For example, if your image needs sophisticated noise reduction, you can use the Noiseware plug-in with Photoshop to do a much better job or noise removal than Lightroom can do. Lightroom’s advantages over Aperture 3 Will always have better integration with Photoshop. Lightroom is backed by bigger and more active user community (So abundant availability for tutorials, etc.) Better noise reduction tool. Especially for photographers the Lens-distortion correction tool  is perfect Lightroom Cons: • Have to Import images to work on them • Slows down with over 10,000 images in the catalog • For processing just one or two images this is a slower workflow Photoshop Pros: • ACR has the same RAW processing controls as Lightroom • ACR Histogram is specialized to the chosen color space (Lightroom is locked into ProPhoto RGB color space with an sRGB tone curve) • Don’t have to Import images to open in Bridge or ACR • Ability to customize processing of RAW images with Photoshop Actions Pricing and Availability Get LightRoomGet PhotoShop Latest version Of Photoshop can be purchased from Adobe store and Adobe authorized reseller and it costs US$999. Latest version of Aperture can be bought for US$199 from Apple Online store or Mac App Store. You can buy latest version of LightRoom from Adobe Store or Adobe Authorized reseller for US$299. Related posts:Adobe Photoshop CS5 vs Photoshop CS5 extended Web based Alternatives to Photoshop 10 Free Alternatives for Adobe Photoshop Software

  Read the article

• SQL – Quick Start with Explorer Sections of NuoDB – Query NuoDB Database

  - by Pinal Dave

  This is the third post in the series of the blog posts I am writing about NuoDB. NuoDB is very innovative and easy-to-use product. I can clearly see how one can scale-out NuoDB with so much ease and confidence. In my very first blog post we discussed how we can install NuoDB (link), and in my second post I discussed how we can manage the NuoDB database transaction engines and storage managers with a few clicks (link). Note: You can Download NuoDB from here. In this post, we will learn how we can use the Explorer feature of NuoDB to do various SQL operations. NuoDB has a browser-based Explorer, which is very powerful and has many of the features any IDE would normally have. Let us see how it works in the following step-by-step tutorial. Let us go to the NuoDBNuoDB Console by typing the following URL in your browser: http://localhost:8080/ It will bring you to the QuickStart screen. Make sure that you have created the sample database. If you have not created sample database, click on Create Database and create it successfully. Now go to the NuoDB Explorer by clicking on the main tab, and it will ask you for your domain username and password. Enter the username as a domain and password as a bird. Alternatively you can also enter username as a quickstart and password as a quickstart. Once you enter the password you will be able to see the databases. In our example we have installed the Sample Database hence you will see the Test database in our Database Hierarchy screen. When you click on database it will ask for the database login. Note that Database Login is different from Domain login and you will have to enter your database login over here. In our case the database username is dba and password is goalie. Once you enter a valid username and password it will display your database. Further expand your database and you will notice various objects in your database. Once you explore various objects, select any database and click on Open. When you click on execute, it will display the SQL script to select the data from the table. The autogenerated script displays entire result set from the database. The NuoDB Explorer is very powerful and makes the life of developers very easy. If you click on List SQL Statements it will list all the available SQL statements right away in Query Editor. You can see the popup window in following image. Here is the cool thing for geeks. You can even click on Query Plan and it will display the text based query plan as well. In case of a SELECT, the query plan will be much simpler, however, when we write complex queries it will be very interesting. We can use the query plan tab for performance tuning of the database. Here is another feature, when we click on List Tables in NuoDB Explorer.  It lists all the available tables in the query editor. This is very helpful when we are writing a long complex query. Here is a relatively complex example I have built using Inner Join syntax. Right below I have displayed the Query Plan. The query plan displays all the little details related to the query. Well, we just wrote multi-table query and executed it against the NuoDB database. You can use the NuoDB Admin section and do various analyses of the query and its performance. NuoDB is a distributed database built on a patented emergent architecture with full support for SQL and ACID guarantees.  It allows you to add Transaction Engine processes to a running system to improve the performance of your system.  You can also add a second Storage Engine to your running system for redundancy purposes.  Conversely, you can shut down processes when you don’t need the extra database resources. NuoDB also provides developers and administrators with a single intuitive interface for centrally monitoring deployments. If you have read my blog posts and have not tried out NuoDB, I strongly suggest that you download it today and catch up with the learnings with me. Trust me though the product is very powerful, it is extremely easy to learn and use. Reference: Pinal Dave (http://blog.sqlauthority.com)   Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• Unit testing is… well, flawed.

  - by Dewald Galjaard

  Hey someone had to say it. I clearly recall my first IT job. I was appointed Systems Co-coordinator for a leading South African retailer at store level. Don’t get me wrong, there is absolutely nothing wrong with an honest day’s labor and in fact I highly recommend it, however I’m obliged to refer to the designation cautiously; in reality all I had to do was monitor in-store prices and two UNIX front line controllers. If anything went wrong – I only had to phone it in… Luckily that wasn’t all I did. My duties extended to some other interesting annual occurrence – stock take. Despite a bit more curious affair, it was still a tedious process that took weeks of preparation and several nights to complete.  Then also I remember that no matter how elaborate our planning was, the entire exercise would be rendered useless if we couldn’t get the basics right – that being the act of counting. Sounds simple right? We’ll with a store which could potentially carry over tens of thousands of different items… we’ll let’s just say I believe that’s when I first became a coffee addict. In those days the act of counting stock was a very humble process. Nothing like we have today. A staff member would be assigned a bin or shelve filled with items he or she had to sort then count. Thereafter they had to record their findings on a complementary piece of paper. Every night I would manage several teams. Each team was divided into two groups - counters and auditors. Both groups had the same task, only auditors followed shortly on the heels of the counters, recounting stock levels, making sure the original count correspond to their findings. It was a simple yet hugely responsible orchestration of people and thankfully there was one fundamental and golden rule I could always abide by to ensure things run smoothly – No-one was allowed to audit their own work. Nope, not even on nights when I didn’t have enough staff available. This meant I too at times had to get up there and get counting, or have the audit stand over until the next evening. The reason for this was obvious - late at night and with so much to do we were prone to make some mistakes, then on the recount, without a fresh set of eyes, you were likely to repeat the offence. Now years later this rule or guideline still holds true as we develop software (as far removed as software development from counting stock may be). For some reason it is a fundamental guideline we’re simply ignorant of. We write our code, we write our tests and thus commit the same horrendous offence. Yes, the procedure of writing unit tests as practiced in most development houses today – is flawed. Most if not all of the tests we write today exercise application logic – our logic. They are based on the way we believe an application or method should/may/will behave or function. As we write our tests, our unit tests mirror our best understanding of the inner workings of our application code. Unfortunately these tests will therefore also include (or be unaware of) any imperfections and errors on our part. If your logic is flawed as you write your initial code, chances are, without a fresh set of eyes, you will commit the same error second time around too. Not even experience seems to be a suitable solution. It certainly helps to have deeper insight, but is that really the answer we should be looking for? Is that really failsafe? What about code review? Code review is certainly an answer. You could have one developer coding away and another (or team) making sure the logic is sound. The practice however has its obvious drawbacks. Firstly and mainly it is resource intensive and from what I’ve seen in most development houses, given heavy deadlines, this guideline is seldom adhered to. Hardly ever do we have the resources, money or time readily available. So what other options are out there? A quest to find some solution revealed a project by Microsoft Research called PEX. PEX is a framework which creates several test scenarios for each method or class you write, automatically. Think of it as your own personal auditor. Within a few clicks the framework will auto generate several unit tests for a given class or method and save them to a single project. PEX help to audit your work. It lends a fresh set of eyes to any project you’re working on and best of all; it is cost effective and fast. Check them out at http://research.microsoft.com/en-us/projects/pex/ In upcoming posts we’ll dive deeper into how it works and how it can help you.   Certainly there are more similar frameworks out there and I would love to hear from you. Please share your experiences and insights.

  Read the article

• GLSL Atmospheric Scattering Issue

  - by mtf1200

  I am attempting to use Sean O'Neil's shaders to accomplish atmospheric scattering. For now I am just using SkyFromSpace and GroundFromSpace. The atmosphere works fine but the planet itself is just a giant dark sphere with a white blotch that follows the camera. I think the problem might rest in the "v3Attenuation" variable as when this is removed the sphere is show (albeit without scattering). Here is the vertex shader. Thanks for the time! uniform mat4 g_WorldViewProjectionMatrix; uniform mat4 g_WorldMatrix; uniform vec3 m_v3CameraPos; // The camera's current position uniform vec3 m_v3LightPos; // The direction vector to the light source uniform vec3 m_v3InvWavelength; // 1 / pow(wavelength, 4) for the red, green, and blue channels uniform float m_fCameraHeight; // The camera's current height uniform float m_fCameraHeight2; // fCameraHeight^2 uniform float m_fOuterRadius; // The outer (atmosphere) radius uniform float m_fOuterRadius2; // fOuterRadius^2 uniform float m_fInnerRadius; // The inner (planetary) radius uniform float m_fInnerRadius2; // fInnerRadius^2 uniform float m_fKrESun; // Kr * ESun uniform float m_fKmESun; // Km * ESun uniform float m_fKr4PI; // Kr * 4 * PI uniform float m_fKm4PI; // Km * 4 * PI uniform float m_fScale; // 1 / (fOuterRadius - fInnerRadius) uniform float m_fScaleDepth; // The scale depth (i.e. the altitude at which the atmosphere's average density is found) uniform float m_fScaleOverScaleDepth; // fScale / fScaleDepth attribute vec4 inPosition; vec3 v3ELightPos = vec3(g_WorldMatrix * vec4(m_v3LightPos, 1.0)); vec3 v3ECameraPos= vec3(g_WorldMatrix * vec4(m_v3CameraPos, 1.0)); const int nSamples = 2; const float fSamples = 2.0; varying vec4 color; float scale(float fCos) { float x = 1.0 - fCos; return m_fScaleDepth * exp(-0.00287 + x*(0.459 + x*(3.83 + x*(-6.80 + x*5.25)))); } void main(void) { gl_Position = g_WorldViewProjectionMatrix * inPosition; // Get the ray from the camera to the vertex and its length (which is the far point of the ray passing through the atmosphere) vec3 v3Pos = vec3(g_WorldMatrix * inPosition); vec3 v3Ray = v3Pos - v3ECameraPos; float fFar = length(v3Ray); v3Ray /= fFar; // Calculate the closest intersection of the ray with the outer atmosphere (which is the near point of the ray passing through the atmosphere) float B = 2.0 * dot(m_v3CameraPos, v3Ray); float C = m_fCameraHeight2 - m_fOuterRadius2; float fDet = max(0.0, B*B - 4.0 * C); float fNear = 0.5 * (-B - sqrt(fDet)); // Calculate the ray's starting position, then calculate its scattering offset vec3 v3Start = m_v3CameraPos + v3Ray * fNear; fFar -= fNear; float fDepth = exp((m_fInnerRadius - m_fOuterRadius) / m_fScaleDepth); float fCameraAngle = dot(-v3Ray, v3Pos) / fFar; float fLightAngle = dot(v3ELightPos, v3Pos) / fFar; float fCameraScale = scale(fCameraAngle); float fLightScale = scale(fLightAngle); float fCameraOffset = fDepth*fCameraScale; float fTemp = (fLightScale + fCameraScale); // Initialize the scattering loop variables float fSampleLength = fFar / fSamples; float fScaledLength = fSampleLength * m_fScale; vec3 v3SampleRay = v3Ray * fSampleLength; vec3 v3SamplePoint = v3Start + v3SampleRay * 0.5; // Now loop through the sample rays vec3 v3FrontColor = vec3(0.0, 0.0, 0.0); vec3 v3Attenuate; for(int i=0; i<nSamples; i++) { float fHeight = length(v3SamplePoint); float fDepth = exp(m_fScaleOverScaleDepth * (m_fInnerRadius - fHeight)); float fScatter = fDepth*fTemp - fCameraOffset; v3Attenuate = exp(-fScatter * (m_v3InvWavelength * m_fKr4PI + m_fKm4PI)); v3FrontColor += v3Attenuate * (fDepth * fScaledLength); v3SamplePoint += v3SampleRay; } vec3 first = v3FrontColor * (m_v3InvWavelength * m_fKrESun + m_fKmESun); vec3 secondary = v3Attenuate; color = vec4((first + vec3(0.25,0.25,0.25) * secondary), 1.0); // ^^ that color is passed to the frag shader and is used as the gl_FragColor } Here is also an image of the problem image

  Read the article

• SQL SERVER – SQL in Sixty Seconds – 5 Videos from Joes 2 Pros Series – SQL Exam Prep Series 70-433

  - by pinaldave

  Joes 2 Pros SQL Server Learning series is indeed fun. Joes 2 Pros series is written for beginners and who wants to build expertise for SQL Server programming and development from fundamental. In the beginning of the series author Rick Morelan is not shy to explain the simplest concept of how to open SQL Server Management Studio. Honestly the book starts with that much basic but as it progresses further Rick discussing about various advanced concepts from query tuning to Core Architecture. This five part series is written with keeping SQL Server Exam 70-433. Instead of just focusing on what will be there in exam, this series is focusing on learning the important concepts thoroughly. This book no way take short cut to explain any concepts and at times, will go beyond the topic at length. The best part is that all the books has many companion videos explaining the concepts and videos. Every Wednesday I like to post a video which explains something in quick few seconds. Today we will go over five videos which I posted in my earlier posts related to Joes 2 Pros series. Introduction to XML Data Type Methods – SQL in Sixty Seconds #015 The XML data type was first introduced with SQL Server 2005. This data type continues with SQL Server 2008 where expanded XML features are available, most notably is the power of the XQuery language to analyze and query the values contained in your XML instance. There are five XML data type methods available in SQL Server 2008: query() – Used to extract XML fragments from an XML data type. value() – Used to extract a single value from an XML document. exist() – Used to determine if a specified node exists. Returns 1 if yes and 0 if no. modify() – Updates XML data in an XML data type. node() – Shreds XML data into multiple rows (not covered in this blog post). [Detailed Blog Post] | [Quiz with Answer] Introduction to SQL Error Actions – SQL in Sixty Seconds #014 Most people believe that when SQL Server encounters an error severity level 11 or higher the remaining SQL statements will not get executed. In addition, people also believe that if any error severity level of 11 or higher is hit inside an explicit transaction, then the whole statement will fail as a unit. While both of these beliefs are true 99% of the time, they are not true in all cases. It is these outlying cases that frequently cause unexpected results in your SQL code. To understand how to achieve consistent results you need to know the four ways SQL Error Actions can react to error severity levels 11-16: Statement Termination – The statement with the procedure fails but the code keeps on running to the next statement. Transactions are not affected. Scope Abortion – The current procedure, function or batch is aborted and the next calling scope keeps running. That is, if Stored Procedure A calls B and C, and B fails, then nothing in B runs but A continues to call C. @@Error is set but the procedure does not have a return value. Batch Termination – The entire client call is terminated. XACT_ABORT – (ON = The entire client call is terminated.) or (OFF = SQL Server will choose how to handle all errors.) [Detailed Blog Post] | [Quiz with Answer] Introduction to Basics of a Query Hint – SQL in Sixty Seconds #013 Query hints specify that the indicated hints should be used throughout the query. Query hints affect all operators in the statement and are implemented using the OPTION clause. Cautionary Note: Because the SQL Server Query Optimizer typically selects the best execution plan for a query, it is highly recommended that hints be used as a last resort for experienced developers and database administrators to achieve the desired results. [Detailed Blog Post] | [Quiz with Answer] Introduction to Hierarchical Query – SQL in Sixty Seconds #012 A CTE can be thought of as a temporary result set and are similar to a derived table in that it is not stored as an object and lasts only for the duration of the query. A CTE is generally considered to be more readable than a derived table and does not require the extra effort of declaring a Temp Table while providing the same benefits to the user. However; a CTE is more powerful than a derived table as it can also be self-referencing, or even referenced multiple times in the same query. A recursive CTE requires four elements in order to work properly: Anchor query (runs once and the results ‘seed’ the Recursive query) Recursive query (runs multiple times and is the criteria for the remaining results) UNION ALL statement to bind the Anchor and Recursive queries together. INNER JOIN statement to bind the Recursive query to the results of the CTE. [Detailed Blog Post] | [Quiz with Answer] Introduction to SQL Server Security – SQL in Sixty Seconds #011 Let’s get some basic definitions down first. Take the workplace example where “Tom” needs “Read” access to the “Financial Folder”. What are the Securable, Principal, and Permissions from that last sentence? A Securable is a resource that someone might want to access (like the Financial Folder). A Principal is anything that might want to gain access to the securable (like Tom). A Permission is the level of access a principal has to a securable (like Read). [Detailed Blog Post] | [Quiz with Answer] Please leave a comment explain which one was your favorite video as that will help me understand what works and what needs improvement. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology, Video

  Read the article

• TFS 2010 SDK: Integrating Twitter with TFS Programmatically

  - by Tarun Arora

  Technorati Tags: Team Foundation Server 2010,TFS API,Integrate Twitter TFS,TFS Programming,ALM,TwitterSharp   Friends at ‘Twitter Sharp’ have created a wonderful .net API for twitter. With this blog post i will try to show you a basic TFS – Twitter integration scenario where i will retrieve the Team Project details programmatically and then publish these details on my twitter page. In future blogs i will be demonstrating how to create a windows service to capture the events raised by TFS and then publishing them in your social eco-system. Download Working Demo: Integrate Twitter - Tfs Programmatically   1. Setting up Twitter API Download Tweet Sharp from => https://github.com/danielcrenna/tweetsharp  Before you can start playing around with this, you will need to register an application on twitter. This is because Twitter uses the OAuth authentication protocol and will not issue an Access token unless your application is registered with them. Go to https://dev.twitter.com/ and register your application   Once you have registered your application, you will need ‘Customer Key’, ‘Customer Secret’, ‘Access Token’, ‘Access Token Secret’ 2. Connecting to Twitter using the Tweet Sharp API Create a new C# windows forms project and add reference to ‘Hammock.ClientProfile’, ‘Newtonsoft.Json’, ‘TweetSharp’ Add the following keys to the App.config (Note – The values for the keys below are in correct and if you try and connect using them then you will get an authorization failure error). Add a new class ‘TwitterProxy’ and use the following code to connect to the TwitterService (Read more about OAuthentication - http://dev.twitter.com/pages/auth) using System;using System.Collections.Generic;using System.Linq;using System.Text;using System.Configuration;using TweetSharp; namespace WindowsFormsApplication2{ public class TwitterProxy { private static string _hero; private static string _consumerKey; private static string _consumerSecret; private static string _accessToken; private static string _accessTokenSecret;  public static TwitterService ConnectToTwitter() { _consumerKey = ConfigurationManager.AppSettings["ConsumerKey"]; _consumerSecret = ConfigurationManager.AppSettings["ConsumerSecret"]; _accessToken = ConfigurationManager.AppSettings["AccessToken"]; _accessTokenSecret = ConfigurationManager.AppSettings["AccessTokenSecret"];  return new TwitterService(_consumerKey, _consumerSecret, _accessToken, _accessTokenSecret); } }} Time to Tweet! _twitterService = Proxy.TwitterProxy.ConnectToTwitter(); _twitterService.SendTweet("Hello World"); SendTweet will return the TweetStatus, If you do not get a 200 OK status that means you have failed authentication, please revisit the Access tokens. --RESPONSE: https://api.twitter.com/1/statuses/update.json HTTP/1.1 200 OK X-Transaction: 1308476106-69292-41752 X-Frame-Options: SAMEORIGIN X-Runtime: 0.03040 X-Transaction-Mask: a6183ffa5f44ef11425211f25 Pragma: no-cache X-Access-Level: read-write X-Revision: DEV X-MID: bd8aa0abeccb6efba38bc0a391a73fab98e983ea Cache-Control: no-cache, no-store, must-revalidate, pre-check=0, post-check=0 Content-Type: application/json; charset=utf-8 Date: Sun, 19 Jun 2011 09:35:06 GMT Expires: Tue, 31 Mar 1981 05:00:00 GMT Last-Modified: Sun, 19 Jun 2011 09:35:06 GMT Server: hi Vary: Accept-Encoding Content-Encoding: Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Transfer-Encoding: chunked   3. Integrate with TFS In my blog post Connect to TFS Programmatically i have in depth demonstrated how to connect to TFS using the TFS API. 1: // Update the AppConfig with the URI of the Team Foundation Server you want to connect to, Make sure you have View Team Project Collection Details permissions on the server 2: private static string _myUri = ConfigurationManager.AppSettings["TfsUri"]; 3: private static TwitterService _twitterService = null; 4:   5: private void button1_Click(object sender, EventArgs e) 6: { 7: lblNotes.Text = string.Empty; 8:   9: try 10: { 11: StringBuilder notes = new StringBuilder(); 12:   13: _twitterService = Proxy.TwitterProxy.ConnectToTwitter(); 14:   15: _twitterService.SendTweet("Hello World"); 16:   17: TfsConfigurationServer configurationServer = 18: TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri)); 19:   20: CatalogNode catalogNode = configurationServer.CatalogNode; 21:   22: ReadOnlyCollection<CatalogNode> tpcNodes = catalogNode.QueryChildren( 23: new Guid[] { CatalogResourceTypes.ProjectCollection }, 24: false, CatalogQueryOptions.None); 25:   26: // tpc = Team Project Collection 27: foreach (CatalogNode tpcNode in tpcNodes) 28: { 29: Guid tpcId = new Guid(tpcNode.Resource.Properties["InstanceId"]); 30: TfsTeamProjectCollection tpc = configurationServer.GetTeamProjectCollection(tpcId); 31:   32: notes.AppendFormat("{0} Team Project Collection : {1}{0}", Environment.NewLine, tpc.Name); 33: _twitterService.SendTweet(String.Format("http://Lunartech.codeplex.com - Connecting to Team Project Collection : {0} ", tpc.Name)); 34:   35: // Get catalog of tp = 'Team Projects' for the tpc = 'Team Project Collection' 36: var tpNodes = tpcNode.QueryChildren( 37: new Guid[] { CatalogResourceTypes.TeamProject }, 38: false, CatalogQueryOptions.None); 39:   40: foreach (var p in tpNodes) 41: { 42: notes.AppendFormat("{0} Team Project : {1} - {2}{0}", Environment.NewLine, p.Resource.DisplayName,  "This is an open source project hosted on codeplex"); 43: _twitterService.SendTweet(String.Format(" Connected to Team Project: '{0}' – '{1}' ", p.Resource.DisplayName, "This is an open source project hosted on codeplex")); 44: } 45: } 46: notes.AppendFormat("{0} Updates posted on Twitter : {1} {0}", Environment.NewLine, @"http://twitter.com/lunartech1"); 47: lblNotes.Text = notes.ToString(); 48: } 49: catch (Exception ex) 50: { 51: lblError.Text = " Message : " + ex.Message + (ex.InnerException != null ? " Inner Exception : " + ex.InnerException : string.Empty); 52: } 53: }   The extensions you can build integrating TFS and Twitter are incredible!   Share this post :

  Read the article

• Nesting Linq-to-Objects query within Linq-to-Entities query –what is happening under the covers?

  - by carewithl

  var numbers = new int[] { 1, 2, 3, 4, 5 }; var contacts = from c in context.Contacts where c.ContactID == numbers.Max() | c.ContactID == numbers.FirstOrDefault() select c; foreach (var item in contacts) Console.WriteLine(item.ContactID); Linq-to-Entities query is first translated into Linq expression tree, which is then converted by Object Services into command tree. And if Linq-to-Entities query nests Linq-to-Objects query, then this nested query also gets translated into an expression tree. a) I assume none of the operators of the nested Linq-to-Objects query actually get executed, but instead data provider for particular DB (or perhaps Object Services) knows how to transform the logic of Linq-to-Objects operators into appropriate SQL statements? b) Data provider knows how to create equivalent SQL statements only for some of the Linq-to-Objects operators? c) Similarly, data provider knows how to create equivalent SQL statements only for some of the non-Linq methods in the Net Framework class library? EDIT: I know only some Sql so I can't be completely sure, but reading Sql query generated for the above code it seems data provider didn't actually execute numbers.Max method, but instead just somehow figured out that numbers.Max should return the maximum value and then proceed to include in generated Sql query a call to TSQL's build-in MAX function. It also put all the values held by numbers array into a Sql query. SELECT CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN '0X0X' ELSE '0X1X' END AS [C1], [Extent1].[ContactID] AS [ContactID], [Extent1].[FirstName] AS [FirstName], [Extent1].[LastName] AS [LastName], [Extent1].[Title] AS [Title], [Extent1].[AddDate] AS [AddDate], [Extent1].[ModifiedDate] AS [ModifiedDate], [Extent1].[RowVersion] AS [RowVersion], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[CustomerTypeID] END AS [C2], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[InitialDate] END AS [C3], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[PrimaryDesintation] END AS [C4], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[SecondaryDestination] END AS [C5], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[PrimaryActivity] END AS [C6], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[SecondaryActivity] END AS [C7], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[Notes] END AS [C8], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[RowVersion] END AS [C9], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[BirthDate] END AS [C10], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[HeightInches] END AS [C11], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[WeightPounds] END AS [C12], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[DietaryRestrictions] END AS [C13] FROM [dbo].[Contact] AS [Extent1] LEFT OUTER JOIN (SELECT [Extent2].[ContactID] AS [ContactID], [Extent2].[BirthDate] AS [BirthDate], [Extent2].[HeightInches] AS [HeightInches], [Extent2].[WeightPounds] AS [WeightPounds], [Extent2].[DietaryRestrictions] AS [DietaryRestrictions], [Extent3].[CustomerTypeID] AS [CustomerTypeID], [Extent3].[InitialDate] AS [InitialDate], [Extent3].[PrimaryDesintation] AS [PrimaryDesintation], [Extent3].[SecondaryDestination] AS [SecondaryDestination], [Extent3].[PrimaryActivity] AS [PrimaryActivity], [Extent3].[SecondaryActivity] AS [SecondaryActivity], [Extent3].[Notes] AS [Notes], [Extent3].[RowVersion] AS [RowVersion], cast(1 as bit) AS [C1] FROM [dbo].[ContactPersonalInfo] AS [Extent2] INNER JOIN [dbo].[Customers] AS [Extent3] ON [Extent2].[ContactID] = [Extent3].[ContactID]) AS [Project1] ON [Extent1].[ContactID] = [Project1].[ContactID] LEFT OUTER JOIN (SELECT TOP (1) [c].[C1] AS [C1] FROM (SELECT [UnionAll3].[C1] AS [C1] FROM (SELECT [UnionAll2].[C1] AS [C1] FROM (SELECT [UnionAll1].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable1] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable2]) AS [UnionAll1] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable3]) AS [UnionAll2] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable4]) AS [UnionAll3] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable5]) AS [c]) AS [Limit1] ON 1 = 1 LEFT OUTER JOIN (SELECT TOP (1) [c].[C1] AS [C1] FROM (SELECT [UnionAll7].[C1] AS [C1] FROM (SELECT [UnionAll6].[C1] AS [C1] FROM (SELECT [UnionAll5].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable6] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable7]) AS [UnionAll5] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable8]) AS [UnionAll6] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable9]) AS [UnionAll7] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable10]) AS [c]) AS [Limit2] ON 1 = 1 CROSS JOIN (SELECT MAX([UnionAll12].[C1]) AS [A1] FROM (SELECT [UnionAll11].[C1] AS [C1] FROM (SELECT [UnionAll10].[C1] AS [C1] FROM (SELECT [UnionAll9].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable11] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable12]) AS [UnionAll9] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable13]) AS [UnionAll10] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable14]) AS [UnionAll11] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable15]) AS [UnionAll12]) AS [GroupBy1] WHERE [Extent1].[ContactID] IN ([GroupBy1].[A1], (CASE WHEN ([Limit1].[C1] IS NULL) THEN 0 ELSE [Limit2].[C1] END)) Based on this, is it possible that Linq2Entities provider indeed doesn't execute non-Linq and Linq-to-Object methods, but instead creates equivalent SQL statements for some of them ( and for others it throws an exception )? Thank you in advance

  Read the article

• Is it Hard to Write a Blog?

  - by Joe Mayo

  Responding to a tweet I received, asking if I found it hard to write a blog and keep it interesting. This is one of the situations where a 140 character response doesn’t do a question justice. There’s a lot to think about between the subjects of writing, subject matter, and entertainment.  Here’s my take on each of these three topics: There’s all types of writing you can do with various degrees of difficulty. If you’re writing a book and you have a gazillion editors bleeding over your every utterance, then the task becomes harder because you’re second-guessing yourself, not knowing whose opinion will be violated. However, if you’re communicating in a public forum, not too many people care about the grammar as much as whether what you have to say is correct.  For a blog, I would say it’s somewhere in-between.  Right now, I’m using Windows Live Writer, which gives me a few advantages to just typing into the blog editor, such as spelling correction and the ability to save my work and resume later.  Overall, writing is one of those things that you just need to get used to.  It’s an essential skill for developers because you need to document your work, depending on what your definition of proper documentation is, and communicate with other developers via various communications mediums. Not begin good (or not thinking that you’re good) shouldn’t hold you back.  Like most things in life, practice will improve your skill.  So, push away that inner voice that keeps you from moving forward and just do it. A good grasp on the subject matter you’re writing about helps.  However, don’t let a lack of knowledge stop you from writing about something. I recall reading something a while back by a developer who didn’t know a technology but wrote about their experience in learning it. They ended up learning more by expressing their thoughts in writing. If you look around out many blogs today, there are many items written by developers learning what they’re writing about.  So, whether you are sure or unsure, you can still write – just be honest with yourself and your readers about what you’re writing. Also, don’t be afraid to have a different opinion or worry if someone will disagree.  I’ll freely admit that it took a while for me to become accustomed to being criticized. Take the good with the bad and use the bad to make yourself better. Guaranteed, someone will disagree with one or more parts of what I’ve written here or think they have a better approach. No problem, more power to them, and whatever constructive comments they have will be a benefit to me in the future; Otherwise, to h*ll with them. :)  Every time you get knocked down, get right back up, dust the dirt off your backside, and keep moving forward.  You’ll learn in time how to align a subject with your own presentation of the material. Entertainment could be hard or could be natural, depending on the personality of yourself and your target audience. It’s even more challenging because you can say something you think is funny and someone will be offended. In fact, there are a lot of things that you shouldn’t say in the name of a joke, but I won’t mention any of them here for want of not offending anyone. Of course, I probably offended someone by saying that and there is probably an organization somewhere in the world out to get me now. I’m probably not the best person to be giving you advice on entertaining an audience.  I mean, every time I try to tell a joke on Twitter 10 people unfriend me. Okay, maybe 15, but you get my point. One thing you might be interested in knowing is that it’s not too hard for one technical person to entertain other technical people, especially when the subject is of interest.  It’s the excitement in each sentence and passion in each paragraph that will keep another developer entertained and interested in what you have to say. Not everyone will like what you’ve written, but the important part is to find your own voice and it’s likely that there is one person in some corner of the world that likes what you have to say, even if it’s your mom and she doesn’t understand a single word you write. :)   If I could leave you with one final thought; Just do it and don’t let anyone or anything hold you back.   Joe

  Read the article

• My Red Gate Experience

  - by Colin Rothwell

  I’m Colin, and I’ve been an intern working with Mike in publishing on Simple-Talk and SQLServerCentral for the past ten weeks. I’ve mostly been working “behind the scenes”, making improvements to the spam filtering, along with various other small tweaks. When I arrived at Red Gate, one of the first things Mike asked me was what I wanted to get out of the internship. It wasn’t a question I’d given a great deal of thought to, but my immediate response was the same as almost anybody: to support my growing family. Well, ok, not quite that, but money was certainly a motivator, along with simply making sure that I didn’t get bored over the summer. Three months is a long time to fill, and many of my friends end up getting bored, or worse, knitting obsessively. With the arrogance which seems fairly common among Cambridge people, I wasn’t expecting to really learn much here! In my mind, the part of the year where I am at Uni is the part where I learn things, whilst Red Gate would be an opportunity to apply what I’d learnt. Thankfully, the opposite is true: I’ve learnt a lot during my time here, and there has been a definite positive impact on the way I write code. The first thing I’ve really learnt is that test-driven development is, in general, a sensible way of working. Before coming, I didn’t really get it: how could you test something you hadn’t yet written? It didn’t make sense! My problem was seeing a test as having to test all the behaviour of a given function. Writing tests which test the bare minimum possible and building them up is a really good way of crystallising the direction the code needs to grow in, and ensures you never attempt to write too much code at time. One really good experience of this was early on in my internship when Mike and I were working on the query used to list active authors: I’d written something which I thought would do the trick, but by starting again using TDD we grew something which revealed that there were several subtle mistakes in the query I’d written. I’ve also been awakened to the value of pair programming. Whilst I could sort of see the point before coming, I also thought that it was impossible that two people would ever get more done at the same computer than if they were working separately. I still think that this is true for projects with pieces that developers can easily work on independently, and with developers who both know the codebase, but I’ve found that pair programming can be really good for learning a code base, and for building up small projects to the point where you can start working on separate components, as well as solving particularly difficult problems. Later on in my internship, for my down tools week project, I was working on adding Python support to Glimpse. Another intern and I we pair programmed the entire project, using ping pong pair programming as much as possible. One bonus that this brought which I wasn’t expecting was that I found myself less prone to distraction: with someone else peering over my shoulder, I didn’t have the ever-present temptation to open gmail, or facebook, or yammer, or twitter, or hacker news, or reddit, and so on, and so forth. I’m quite proud of this project: I think it’s some of the best code I’ve written. I’ve also been really won over to the value of descriptive variables names. In my pre-Red Gate life, as a lone-ranger style cowboy programmer, I’d developed a tendency towards laziness in variable names, sometimes abbreviating or, worse, using acronyms. I’ve swiftly realised that this is a bad idea when working with a team: saving a few key strokes is inevitably not worth it when it comes to reading code again in the future. Longer names also mean you can do away with a majority of comments. I appreciate that if you’ve come up with an O(n*log n) algorithm for something which seemed O(n^2), you probably want to explain how it works, but explaining what a variable name means is a big no no: it’s so very easy to change the behaviour of the code, whilst forgetting about the comments. Whilst at Red Gate, I took the opportunity to attend a code retreat, which really helped me to solidify all the things I’d learnt. To be completely free of any existing code base really lets you focus on best practises and think about how you write code. If you get a chance to go on a similar event, I’d highly recommend it! Cycling to Red Gate, I’ve also become much better at fitting inner tubes: if you’re struggling to get the tube out, or re-fit the tire, letting a bit of air out usually helps. I’ve also become quite a bit better at foosball and will miss having a foosball table! I’d like to finish off by saying thank you to everyone at Red Gate for having me. I’ve really enjoyed working with, and learning from, the team that brings you this web site. If you meet any of them, buy them a drink!

  Read the article

• Database Owner Conundrum

  - by Johnm

  Have you ever restored a database from a production environment on Server A into a development environment on Server B and had some items, such as Service Broker, mysteriously cease functioning? You might want to consider reviewing the database owner property of the database. The Scenario Recently, I was developing some messaging functionality that utilized the Service Broker feature of SQL Server in a development environment. Within the instance of the development environment resided two databases: One was a restored version of a production database that we will call "RestoreDB". The second database was a brand new database that has yet to exist in the production environment that we will call "DevDB". The goal is to setup a communication path between RestoreDB and DevDB that will later be implemented into the production database. After implementing all of the Service Broker objects that are required to communicate within a database as well as between two databases on the same instance I found myself a bit confounded. My testing was showing that the communication was successful when it was occurring internally within DevDB; but the communication between RestoreDB and DevDB did not appear to be working. Profiler to the rescue After carefully reviewing my code for any misspellings, missing commas or any other minor items that might be a syntactical cause of failure, I decided to launch Profiler to aid in the troubleshooting. After simulating the cross database messaging, I noticed the following error appearing in Profiler: An exception occurred while enqueueing a message in the target queue. Error: 33009, State: 2. The database owner SID recorded in the master database differs from the database owner SID recorded in database '[Database Name Here]'. You should correct this situation by resetting the owner of database '[Database Name Here]' using the ALTER AUTHORIZATION statement. Now, this error message is a helpful one. Not only does it identify the issue in plain language, it also provides a potential solution. An execution of the following query that utilizes the catalog view sys.transmission_queue revealed the same error message for each communication attempt: SELECT     * FROM        sys.transmission_queue; Seeing the situation as a learning opportunity I dove a bit deeper. Reviewing the database properties  The owner of a specific database can be easily viewed by right-clicking the database in SQL Server Management Studio and selecting the "properties" option. The owner is listed on the "General" page of the properties screen. In my scenario, the database in the production server was created by Frank the DBA; therefore his server login appeared as the owner: "ServerName\Frank". While this is interesting information, it certainly doesn't tell me much in regard to the SID (security identifier) and its existence, or lack thereof, in the master database as the error suggested. I pulled together the following query to gather more interesting information: SELECT     a.name     , a.owner_sid     , b.sid     , b.name     , b.type_desc FROM        master.sys.databases a     LEFT OUTER JOIN master.sys.server_principals b         ON a.owner_sid = b.sid WHERE     a.name not in ('master','tempdb','model','msdb'); This query also helped identify how many other user databases in the instance were experiencing the same issue. In this scenario, I saw that there were no matching SIDs in server_principals to the owner SID for my database. What login should be used as the database owner instead of Frank's? The system stored procedure sp_helplogins will provide a list of the valid logins that can be used. Here is an example of its use, revealing all available logins: EXEC sp_helplogins;  Fixing a hole The error message stated that the recommended solution was to execute the ALTER AUTHORIZATION statement. The full statement for this scenario would appear as follows: ALTER AUTHORIZATION ON DATABASE:: [Database Name Here] TO [Login Name]; Another option is to execute the following statement using the sp_changedbowner system stored procedure; but please keep in mind that this stored procedure has been deprecated and will likely disappear in future versions of SQL Server: EXEC dbo.sp_changedbowner @loginname = [Login Name]; .And They Lived Happily Ever After Upon changing the database owner to an existing login and simulating the inner and cross database messaging the errors have ceased. More importantly, all messages sent through this feature now successfully complete their journey. I have added the ownership change to my restoration script for the development environment.

  Read the article

• Cardinality Estimation Bug with Lookups in SQL Server 2008 onward

  - by Paul White

  Cost-based optimization stands or falls on the quality of cardinality estimates (expected row counts).  If the optimizer has incorrect information to start with, it is quite unlikely to produce good quality execution plans except by chance.  There are many ways we can provide good starting information to the optimizer, and even more ways for cardinality estimation to go wrong.  Good database people know this, and work hard to write optimizer-friendly queries with a schema and metadata (e.g. statistics) that reduce the chances of poor cardinality estimation producing a sub-optimal plan.  Today, I am going to look at a case where poor cardinality estimation is Microsoft’s fault, and not yours. SQL Server 2005 SELECT th.ProductID, th.TransactionID, th.TransactionDate FROM Production.TransactionHistory AS th WHERE th.ProductID = 1 AND th.TransactionDate BETWEEN '20030901' AND '20031231'; The query plan on SQL Server 2005 is as follows (if you are using a more recent version of AdventureWorks, you will need to change the year on the date range from 2003 to 2007): There is an Index Seek on ProductID = 1, followed by a Key Lookup to find the Transaction Date for each row, and finally a Filter to restrict the results to only those rows where Transaction Date falls in the range specified.  The cardinality estimate of 45 rows at the Index Seek is exactly correct.  The table is not very large, there are up-to-date statistics associated with the index, so this is as expected. The estimate for the Key Lookup is also exactly right.  Each lookup into the Clustered Index to find the Transaction Date is guaranteed to return exactly one row.  The plan shows that the Key Lookup is expected to be executed 45 times.  The estimate for the Inner Join output is also correct – 45 rows from the seek joining to one row each time, gives 45 rows as output. The Filter estimate is also very good: the optimizer estimates 16.9951 rows will match the specified range of transaction dates.  Eleven rows are produced by this query, but that small difference is quite normal and certainly nothing to worry about here.  All good so far. SQL Server 2008 onward The same query executed against an identical copy of AdventureWorks on SQL Server 2008 produces a different execution plan: The optimizer has pushed the Filter conditions seen in the 2005 plan down to the Key Lookup.  This is a good optimization – it makes sense to filter rows out as early as possible.  Unfortunately, it has made a bit of a mess of the cardinality estimates. The post-Filter estimate of 16.9951 rows seen in the 2005 plan has moved with the predicate on Transaction Date.  Instead of estimating one row, the plan now suggests that 16.9951 rows will be produced by each clustered index lookup – clearly not right!  This misinformation also confuses SQL Sentry Plan Explorer: Plan Explorer shows 765 rows expected from the Key Lookup (it multiplies a rounded estimate of 17 rows by 45 expected executions to give 765 rows total). Workarounds One workaround is to provide a covering non-clustered index (avoiding the lookup avoids the problem of course): CREATE INDEX nc1 ON Production.TransactionHistory (ProductID) INCLUDE (TransactionDate); With the Transaction Date filter applied as a residual predicate in the same operator as the seek, the estimate is again as expected: We could also force the use of the ultimate covering index (the clustered one): SELECT th.ProductID, th.TransactionID, th.TransactionDate FROM Production.TransactionHistory AS th WITH (INDEX(1)) WHERE th.ProductID = 1 AND th.TransactionDate BETWEEN '20030901' AND '20031231'; Summary Providing a covering non-clustered index for all possible queries is not always practical, and scanning the clustered index will rarely be optimal.  Nevertheless, these are the best workarounds we have today. In the meantime, watch out for poor cardinality estimates when a predicate is applied as part of a lookup. The worst thing is that the estimate after the lookup join in the 2008+ plans is wrong.  It’s not hopelessly wrong in this particular case (45 versus 16.9951 is not the end of the world) but it easily can be much worse, and there’s not much you can do about it.  Any decisions made by the optimizer after such a lookup could be based on very wrong information – which can only be bad news. If you think this situation should be improved, please vote for this Connect item. © 2012 Paul White – All Rights Reserved twitter: @SQL_Kiwi email: [email protected]

  Read the article

• Repeated disconnects on WPA PEAP network

  - by exasperated

  My school has a WPA PEAP network with GTC inner authentication. I am able to connect to the network, but once I load a website or two, the network become unresponsive (i.e. in Chromium, it gets stuck at "Sending request"), and I'm eventually disconnected. Any help will be greatly appreciated. Here's some log output. I can provide more if needed: Ubuntu 13.04 3.8.0-32-generic x86_64 lsusb: 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) lsmod: iwldvm                241872  0  mac80211              606457  1 iwldvm iwlwifi               173516  1 iwldvm cfg80211              511019  3 iwlwifi,mac80211,iwldvm dmesg: [    3.501227] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [    3.503541] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 [    3.527153] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [    3.527162] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [    3.527170] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [    3.527178] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [    3.527186] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [    3.527192] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [    3.527240] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [    3.551049] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [  375.153065] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [  375.159727] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [  375.553201] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [  375.559871] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 1892.110738] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 1892.117357] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5227.235372] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5227.242122] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5817.817954] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5817.824560] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5824.571917] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 5824.571929] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 5824.571935] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 6956.290061] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 6956.296671] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 6963.080560] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6963.080566] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 6963.080570] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 7613.469241] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 7613.475870] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 7620.201265] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 7620.201278] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 7620.201285] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 8232.762453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 8232.769065] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 8239.581772] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 8239.581784] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 8239.581792] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [13763.634808] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [13763.641427] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [16955.598953] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [16955.605574] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 lshw:    *-network        description: Wireless interface        product: Centrino Advanced-N 6235        vendor: Intel Corporation        physical id: 0        bus info: pci@0000:03:00.0        logical name: wlan0        version: 24        serial: b4:b6:76:a0:4b:3c        width: 64 bits        clock: 33MHz        capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless        configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-32-generic firmware=18.168.6.1 ip=10.250.169.96 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn        resources: irq:46 memory:f7c00000-f7c01fff iwlist scan: Cell 02 - Address: 24:DE:C6:B0:C7:D9                     Channel:36                     Frequency:5.18 GHz (Channel 36)                     Quality=29/70  Signal level=-81 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=0000004ff3fe419b                     Extra: Last beacon: 27820ms ago                     IE: Unknown: 0009436174436861743278                     IE: Unknown: 01088C129824B048606C                     IE: Unknown: 030124                     IE: IEEE 802.11i/WPA2 Version 1                         Group Cipher : CCMP                         Pairwise Ciphers (1) : CCMP                         Authentication Suites (1) : 802.1x                     IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: 3D1624001B000000FF000000000000000000000000000000                     IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00                     IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: DD1A00904C3424001B000000FF000000000000000000000000000000           Cell 04 - Address: 24:DE:C6:B0:C3:E9                     Channel:149                     Frequency:5.745 GHz                     Quality=28/70  Signal level=-82 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=000000181f60e19c                     Extra: Last beacon: 28680ms ago                     IE: Unknown: 0009436174436861743278                     IE: Unknown: 01088C129824B048606C                     IE: Unknown: 030195                     IE: Unknown: 050400010000                     IE: IEEE 802.11i/WPA2 Version 1                         Group Cipher : CCMP                         Pairwise Ciphers (1) : CCMP                         Authentication Suites (1) : 802.1x                     IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: 3D1695001B000000FF000000000000000000000000000000                     IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00                     IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: DD1A00904C3495001B000000FF000000000000000000000000000000                     IE: Unknown: DD07000B8601040817                     IE: Unknown: DD0E000B860103006170313930333032           Cell 09 - Address: 24:DE:C6:B0:C0:29                     Channel:149                     Frequency:5.745 GHz                     Quality=39/70  Signal level=-71 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=00000112fb688ede                     Extra: Last beacon: 27716ms ago ifconfig (while connected): wlan0     Link encap:Ethernet  HWaddr b4:b6:76:a0:4b:3c             inet addr:10.250.16.220  Bcast:10.250.31.255  Mask:255.255.240.0           inet6 addr: fe80::b6b6:76ff:fea0:4b3c/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:230023 errors:0 dropped:0 overruns:0 frame:0           TX packets:130970 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000            RX bytes:255999759 (255.9 MB)  TX bytes:16652605 (16.6 MB) iwconfig (while connected): wlan0     IEEE 802.11abgn  ESSID:"CatChat2x"             Mode:Managed  Frequency:5.745 GHz  Access Point: 24:DE:C6:B0:C0:29              Bit Rate=6 Mb/s   Tx-Power=15 dBm              Retry  long limit:7   RTS thr:off   Fragment thr:off           Power Management:off           Link Quality=36/70  Signal level=-74 dBm             Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0           Tx excessive retries:0  Invalid misc:3   Missed beacon:0

  Read the article

• Modularity through HTTP

  - by Michael Williamson

  As programmers, we strive for modularity in the code we write. We hope that splitting the problem up makes it easier to solve, and allows us to reuse parts of our code in other applications. Object-orientation is the most obvious of many attempts to get us closer to this ideal, and yet one of the most successful approaches is almost accidental: the web. Programming languages provide us with functions and classes, and plenty of other ways to modularize our code. This allows us to take our large problem, split it into small parts, and solve those small parts without having to worry about the whole. It also makes it easier to reason about our code. So far, so good, but now that we’ve written our small, independent module, for example to send out e-mails to my customers, we’d like to reuse it in another application. By creating DLLs, JARs or our platform’s package container of choice, we can do just that – provided our new application is on the same platform. Want to use a Java library from C#? Well, good luck – it might be possible, but it’s not going to be smooth sailing. Even if a library exists, it doesn’t mean that using it going to be a pleasant experience. Say I want to use Java to write out an XML document to an output stream. You’d imagine this would be a simple one-liner. You’d be wrong: import org.w3c.dom.*; import java.io.*; import javax.xml.transform.*; import javax.xml.transform.dom.*; import javax.xml.transform.stream.*; private static final void writeDoc(Document doc, OutputStream out) throws IOException { try { Transformer t = TransformerFactory.newInstance().newTransformer(); t.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, doc.getDoctype().getSystemId()); t.transform(new DOMSource(doc), new StreamResult(out)); } catch (TransformerException e) { throw new AssertionError(e); // Can't happen! } } Most of the time, there is a good chance somebody else has written the code before, but if nobody can understand the interface to that code, nobody’s going to use it. The result is that most of the code we write is just a variation on a theme. Despite our best efforts, we’ve fallen a little short of our ideal, but the web brings us closer. If we want to send e-mails to our customers, we could write an e-mail-sending library. More likely, we’d use an existing one for our language. Even then, we probably wouldn’t have niceties like A/B testing or DKIM signing. Alternatively, we could just fire some HTTP requests at MailChimp, and get a whole slew of features without getting anywhere near the code that implements them. The web is inherently language agnostic. So long as your language can send and receive text over HTTP, and probably parse some JSON, you’re about as well equipped as anybody. Instead of building libraries for a specific language, we can build a service that almost every language can reuse. The text-based nature of HTTP also helps to limit the complexity of the API. As SOAP will attest, you can still make a horrible mess using HTTP, but at least it is an obvious horrible mess. Complex data structures are tedious to marshal to and from text, providing a strong incentive to keep things simple. By contrast, spotting the complexities in a class hierarchy is often not as easy. HTTP doesn’t solve every problem. It probably isn’t such a good idea to use it inside an inner loop that’s executed thousands of times per second. What’s more, the HTTP approach might introduce some new problems. We often need to add a thin shim to each application that we wish to communicate over HTTP. For instance, we might need to write a small plugin in PHP if we want to integrate WordPress into our system. Suddenly, instead of a system written in one language, we’re maintaining a system with several distinct languages and platforms. Even then, we should strive to avoid re-implementing the same old thing. As programmers, we consistently underestimate both the cost of building a system and the ongoing maintenance. If we allow ourselves to integrate existing applications, even if they’re in unfamiliar languages, we save ourselves those development and maintenance costs, as well as being able to pick the best solution for our problem. Thanks to the web, HTTP is often the easiest way to get there.

  Read the article

• Node Serialization in NetBeans Platform 7.0

  - by Geertjan

  Node serialization makes sense when you're not interested in the data (since that should be serialized to a database), but in the state of the application. For example, when the application restarts, you want the last selected node to automatically be selected again. That's not the kind of information you'll want to store in a database, hence node serialization is not about data serialization but about application state serialization. I've written about this topic in October 2008, here and here, but want to show how to do this again, using NetBeans Platform 7.0. Somewhere I remember reading that this can't be done anymore and that's typically the best motivation for me, i.e., to prove that it can be done after all. Anyway, in a standard POJO/Node/BeanTreeView scenario, do the following: Remove the "@ConvertAsProperties" annotation at the top of the class, which you'll find there if you used the Window Component wizard. We're not going to use property-file based serialization, but plain old java.io.Serializable  instead. In the TopComponent, assuming it is named "UserExplorerTopComponent", typically at the end of the file, add the following: @Override public Object writeReplace() { //We want to work with one selected item only //and thanks to BeanTreeView.setSelectionMode, //only one node can be selected anyway: Handle handle = NodeOp.toHandles(em.getSelectedNodes())[0]; return new ResolvableHelper(handle); } public final static class ResolvableHelper implements Serializable { private static final long serialVersionUID = 1L; public Handle selectedHandle; private ResolvableHelper(Handle selectedHandle) { this.selectedHandle = selectedHandle; } public Object readResolve() { WindowManager.getDefault().invokeWhenUIReady(new Runnable() { @Override public void run() { try { //Get the TopComponent: UserExplorerTopComponent tc = (UserExplorerTopComponent) WindowManager.getDefault().findTopComponent("UserExplorerTopComponent"); //Get the display text to search for: String selectedDisplayName = selectedHandle.getNode().getDisplayName(); //Get the root, which is the parent of the node we want: Node root = tc.getExplorerManager().getRootContext(); //Find the node, by passing in the root with the display text: Node selectedNode = NodeOp.findPath(root, new String[]{selectedDisplayName}); //Set the explorer manager's selected node: tc.getExplorerManager().setSelectedNodes(new Node[]{selectedNode}); } catch (PropertyVetoException ex) { Exceptions.printStackTrace(ex); } catch (IOException ex) { Exceptions.printStackTrace(ex); } } }); return null; } } Assuming you have a node named "UserNode" for a type named "User" containing a property named "type", add the bits in bold below to your "UserNode": public class UserNode extends AbstractNode implements Serializable { static final long serialVersionUID = 1L; public UserNode(User key) { super(Children.LEAF); setName(key.getType()); } @Override public Handle getHandle() { return new CustomHandle(this, getName()); } public class CustomHandle implements Node.Handle { static final long serialVersionUID = 1L; private AbstractNode node = null; private final String searchString; public CustomHandle(AbstractNode node, String searchString) { this.node = node; this.searchString = searchString; } @Override public Node getNode() { node.setName(searchString); return node; } } } Run the application and select one of the user nodes. Close the application. Start it up again. The user node is not automatically selected, in fact, the window does not open, and you will see this in the output: Caused: java.io.InvalidClassException: org.serialization.sample.UserNode; no valid constructor Read this article and then you'll understand the need for this class: public class BaseNode extends AbstractNode { public BaseNode() { super(Children.LEAF); } public BaseNode(Children kids) { super(kids); } public BaseNode(Children kids, Lookup lkp) { super(kids, lkp); } } Now, instead of extending AbstractNode in your UserNode, extend BaseNode. Then the first non-serializable superclass of the UserNode has an explicitly declared no-args constructor, Do the same as the above for each node in the hierarchy that needs to be serialized. If you have multiple nodes needing serialization, you can share the "CustomHandle" inner class above between all the other nodes, while all the other nodes will also need to extend BaseNode (or provide their own non-serializable super class that explicitly declares a no-args constructor). Now, when I run the application, I select a node, then I close the application, restart it, and the previously selected node is automatically selected when the application has restarted.

  Read the article

• Accelerating 2d object collision with other objects [on hold]

  - by Silent Cave

  Making my very first attempt at game programming with SDL/OpenGL. So I made an object Actor witch can move in all four sides with acceleration. And there are bunch of other rectangles to collide to. the image Movement and collision detection alghorythms work just fine by itself, but when combined to prevent the green rectangle from crossing black rectangles, it gives me a kind of funny resault. Let me show you the code first: from Actor.h class Actor{ public: SDL_Rect * dim; alphaColor * col; float speed; float xlGrav, xrGrav, yuGrav, ydGrav; float acceleration; bool left,right,up,down; Actor(SDL_Rect * dim,alphaColor * col, float speed, float acceleration); bool colides(const SDL_Rect & rect); bool check_for_collisions(const std::vector<SDL_Rect*> & gameObjects ); }; from actor.cpp bool Actor::colides(const SDL_Rect & rect){ if (dim->x + dim->w < rect.x) return false; if (dim->x > rect.x + rect.w) return false; if (dim->y + dim->h < rect.y) return false; if (dim->y > rect.y + rect.h) return false; return true; } movement logic from main.cpp if (actor->left){ if(actor->xlGrav < actor->speed){ actor->xlGrav += actor->speed*actor->acceleration; }else actor->xlGrav = actor->speed; actor->dim->x -= actor->xlGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->x += actor->xlGrav; actor->xlGrav = 0; } } if (!actor->left){ if(actor->xlGrav - actor->speed*actor->acceleration > 0){ actor->xlGrav -= actor->speed*actor->acceleration; }else actor->xlGrav = 0; actor->dim->x -= actor->xlGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->x += actor->xlGrav; actor->xlGrav = 0; } } if (actor->right){ if(actor->xrGrav < actor->speed){ actor->xrGrav += actor->speed*actor->acceleration; }else actor->xrGrav = actor->speed; actor->dim->x += actor->xrGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->x -= actor->xrGrav; actor->xrGrav = 0; } } if (!actor->right){ if(actor->xrGrav - actor->speed*actor->acceleration > 0){ actor->xrGrav -= actor->speed*actor->acceleration; }else actor->xrGrav = 0; actor->dim->x += actor->xrGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->x -= actor->xrGrav; actor->xrGrav = 0; } } if (actor->up){ if(actor->yuGrav < actor->speed){ actor->yuGrav += actor->speed*actor->acceleration; }else actor->yuGrav = actor->speed; actor->dim->y -= actor->yuGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->y += actor->yuGrav; actor->yuGrav = 0; } } if (!actor->up){ if(actor->yuGrav - actor->speed*actor->acceleration > 0){ actor->yuGrav -= actor->speed*actor->acceleration; }else actor->yuGrav = 0; actor->dim->y -= actor->yuGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->y += actor->yuGrav; actor->yuGrav = 0; } } if (actor->down){ if(actor->ydGrav < actor->speed){ actor->ydGrav += actor->speed*actor->acceleration; }else actor->ydGrav = actor->speed; actor->dim->y += actor->ydGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->y -= actor->ydGrav; actor->ydGrav = 0; } } if (!actor->down){ if(actor->ydGrav - actor->speed*actor->acceleration > 0){ actor->ydGrav -= actor->speed*actor->acceleration; }else actor->ydGrav = 0; actor->dim->y += actor->ydGrav; if(actor->check_for_collisions(gameObjects)){ actor->dim->y -= actor->ydGrav; actor->ydGrav = 0; } } So, if the green box approaches an obstacle from up or left, everything goes as planned - object stops, and it's acceleration drops to zero. But if it comes from bottom or right, it enters into obstacles inner space and starts strangely dance, I'd rather say move in inverted controls. What do I fail to see?

  Read the article

• What Counts For a DBA: Fitness

  - by Louis Davidson

  If you know me, you can probably guess that physical exercise is not really my thing. There was a time in my past when it a larger part of my life, but even then never in the same sort of passionate way as a number of our SQL friends.  For me, I find that mental exercise satisfies what I believe to be the same inner need that drives people to run farther than I like to drive on most Saturday mornings, and it is certainly just as addictive. Mental fitness shares many common traits with physical fitness, especially the need to attain it through repetitive training. I only wish that mental training burned off a bacon cheeseburger in the same manner as does jogging around a dewy park on Saturday morning. In physical training, there are at least two goals, the first of which is to be physically able to do a task. The second is to train the brain to perform the task without thinking too hard about it. No matter how long it has been since you last rode a bike, you will be almost certainly be able to hop on and start riding without thinking about the process of pedaling or balancing. If you’ve never ridden a bike, you could be a physics professor /Olympic athlete and still crash the first few times you try, even though you are as strong as an ox and your knowledge of the physics of bicycle riding makes the concept child’s play. For programming tasks, the process is very similar. As a DBA, you will come to know intuitively how to backup, optimize, and secure database systems. As a data programmer, you will work to instinctively use the clauses of Transact-SQL DML so that, when you need to group data three ways (and not four), you will know to use the GROUP BY clause with GROUPING SETS without resorting to a search engine.  You have the skill. Making it naturally then requires repetition and experience is the primary requirement, not just simply learning about a topic. The hardest part of being really good at something is this difference between knowledge and skill. I have recently taken several informative training classes with Kimball University on data warehousing and ETL. Now I have a lot more knowledge about designing data warehouses than before. I have also done a good bit of data warehouse designing of late and have started to improve to some level of proficiency with the theory. Yet, for all of this head knowledge, it is still a struggle to take what I have learned and apply it to the designs I am working on.  Data warehousing is still a task that is not yet deeply ingrained in my brain muscle memory. On the other hand, relational database design is something that no matter how much or how little I may get to do it, I am comfortable doing it. I have done it as a profession now for well over a decade, I teach classes on it, and I also have done (and continue to do) a lot of mental training beyond the work day. Sometimes the training is just basic education, some reading blogs and attending sessions at PASS events.  My best training comes from spending time working on other people’s design issues in forums (though not nearly as much as I would like to lately). Working through other people’s problems is a great way to exercise your brain on problems with which you’re not immediately familiar. The final bit of exercise I find useful for cultivating mental fitness for a data professional is also probably the nerdiest thing that I will ever suggest you do.  Akin to running in place, the idea is to work through designs in your head. I have designed more than one database system that would revolutionize grocery store operations, sales at my local Target store, the ordering process at Amazon, and ways to improve Disney World operations to get me through a line faster (some of which they are starting to implement without any of my help.) Never are the designs truly fleshed out, but enough to work through structures and processes.  On “paper”, I have designed database systems to catalog things as trivial as my Lego creations, rental car companies and my audio and video collections. Once I get the database designed mentally, sometimes I will create the database, add some data (often using Red-Gate’s Data Generator), and write a few queries to see if a concept was realistic, but I will rarely fully flesh out the database since I have no desire to do any user interface programming anymore.  The mental training allows me to keep in practice for when the time comes to do the work I love the most for real…even if I have been spending most of my work time lately building data warehouses.  If you are really strong of mind and body, perhaps you can mix a mental run with a physical run; though don’t run off of a cliff while contemplating how you might design a database to catalog the trees on a mountain…that would be contradictory to the purpose of both types of exercise.

  Read the article

• Microsoft Sql Server 2008 R2 System Databases

  For a majority of software developers little time is spent understanding the inner workings of the database management systems (DBMS) they use to store data for their applications.  I personally place myself in this grouping. In my case, I have used various versions of Microsoft’s SQL Server (2000, 2005, and 2008 R2) and just recently learned how valuable they really are when I was preparing to deliver a lecture on "SQL Server 2008 R2, System Databases". Microsoft Sql Server 2008 R2 System DatabasesSo what are system databases in MS SQL Server, and why should I know them? Microsoft uses system databases to support the SQL Server DBMS, much like a developer uses config files or database tables to support an application. These system databases individually provide specific functionality that allows MS SQL Server to function. Name Database File Log File Master master.mdf mastlog.ldf Resource mssqlsystemresource.mdf mssqlsystemresource.ldf Model model.mdf modellog.ldf MSDB msdbdata.mdf msdblog.ldf Distribution distmdl.mdf distmdl.ldf TempDB tempdb.mdf templog.ldf Master DatabaseIf you have used MS SQL Server then you should recognize the Master database especially if you used the SQL Server Management Studio (SSMS) to connect to a user created database. MS SQL Server requires the Master database in order for DBMS to start due to the information that it stores. Examples of data stored in the Master database User Logins Linked Servers Configuration information Information on User Databases Resource DatabaseHonestly, until recently I never knew this database even existed until I started to research SQL Server system databases. The reason for this is due largely to the fact that the resource database is hidden to users. In fact, the database files are stored within the Binn folder instead of the standard MS SQL Server database folder path. This database contains all system objects that can be accessed by all other databases.  In short, this database contains all system views and store procedures that appear in all other user databases regarding system information. One of the many benefits to storing system views and store procedures in a single hidden database is the fact it improves upgrading a SQL Server database; not to mention that maintenance is decreased since only one code base has to be mainlined for all of the system views and procedures. Model DatabaseThe Model database as the name implies is the model for all new databases created by users. This allows for predefining default database objects for all new databases within a MS SQL Server instance. For example, if every database created by a user needs to have an “Audit” table when it is  created then defining the “Audit” table in the model will guarantees that the table will be located in every new database create after the model is altered. MSDB DatabaseThe MSDBdatabase is used by SQL Server Agent, SQL Server Database Mail, SQL Server Service Broker, along with SQL Server. The SQL Server Agent uses this database to store job configurations and SQL job schedules along with SQL Alerts, and Operators. In addition, this database also stores all SQL job parameters along with each job’s execution history.  Finally, this database is also used to store database backup and maintenance plans as well as details pertaining to SQL Log shipping if it is being used. Distribution DatabaseThe Distribution database is only used during replication and stores meta data and history information pertaining to the act of replication data. Furthermore, when transactional replication is used this database also stores information regarding each transaction. It is important to note that replication is not turned on by default in MS SQL Server and that the distribution database is hidden from SSMS. Tempdb DatabaseThe Tempdb as the name implies is used to store temporary data and data objects. Examples of this include temp tables and temp store procedures. It is important to note that when using this database all data and data objects are cleared from this database when SQL Server restarts. This database is also used by SQL Server when it is performing some internal operations. Typically, SQL Server uses this database for the purpose of large sort and index operations. Finally, this database is used to store row versions if row versioning or snapsot isolation transactions are being used by SQL Server. Additionally, I would love to hear from others about their experiences using system databases, tables, and objects in a real world environments.

  Read the article

• Microsoft Sql Server 2008 R2 System Databases

  For a majority of software developers little time is spent understanding the inner workings of the database management systems (DBMS) they use to store data for their applications.  I personally place myself in this grouping. In my case, I have used various versions of Microsoft’s SQL Server (2000, 2005, and 2008 R2) and just recently learned how valuable they really are when I was preparing to deliver a lecture on "SQL Server 2008 R2, System Databases". Microsoft Sql Server 2008 R2 System DatabasesSo what are system databases in MS SQL Server, and why should I know them? Microsoft uses system databases to support the SQL Server DBMS, much like a developer uses config files or database tables to support an application. These system databases individually provide specific functionality that allows MS SQL Server to function. Name Database File Log File Master master.mdf mastlog.ldf Resource mssqlsystemresource.mdf mssqlsystemresource.ldf Model model.mdf modellog.ldf MSDB msdbdata.mdf msdblog.ldf Distribution distmdl.mdf distmdl.ldf TempDB tempdb.mdf templog.ldf Master DatabaseIf you have used MS SQL Server then you should recognize the Master database especially if you used the SQL Server Management Studio (SSMS) to connect to a user created database. MS SQL Server requires the Master database in order for DBMS to start due to the information that it stores. Examples of data stored in the Master database User Logins Linked Servers Configuration information Information on User Databases Resource DatabaseHonestly, until recently I never knew this database even existed until I started to research SQL Server system databases. The reason for this is due largely to the fact that the resource database is hidden to users. In fact, the database files are stored within the Binn folder instead of the standard MS SQL Server database folder path. This database contains all system objects that can be accessed by all other databases.  In short, this database contains all system views and store procedures that appear in all other user databases regarding system information. One of the many benefits to storing system views and store procedures in a single hidden database is the fact it improves upgrading a SQL Server database; not to mention that maintenance is decreased since only one code base has to be mainlined for all of the system views and procedures. Model DatabaseThe Model database as the name implies is the model for all new databases created by users. This allows for predefining default database objects for all new databases within a MS SQL Server instance. For example, if every database created by a user needs to have an “Audit” table when it is  created then defining the “Audit” table in the model will guarantees that the table will be located in every new database create after the model is altered. MSDB DatabaseThe MSDBdatabase is used by SQL Server Agent, SQL Server Database Mail, SQL Server Service Broker, along with SQL Server. The SQL Server Agent uses this database to store job configurations and SQL job schedules along with SQL Alerts, and Operators. In addition, this database also stores all SQL job parameters along with each job’s execution history.  Finally, this database is also used to store database backup and maintenance plans as well as details pertaining to SQL Log shipping if it is being used. Distribution DatabaseThe Distribution database is only used during replication and stores meta data and history information pertaining to the act of replication data. Furthermore, when transactional replication is used this database also stores information regarding each transaction. It is important to note that replication is not turned on by default in MS SQL Server and that the distribution database is hidden from SSMS. Tempdb DatabaseThe Tempdb as the name implies is used to store temporary data and data objects. Examples of this include temp tables and temp store procedures. It is important to note that when using this database all data and data objects are cleared from this database when SQL Server restarts. This database is also used by SQL Server when it is performing some internal operations. Typically, SQL Server uses this database for the purpose of large sort and index operations. Finally, this database is used to store row versions if row versioning or snapsot isolation transactions are being used by SQL Server. Additionally, I would love to hear from others about their experiences using system databases, tables, and objects in a real world environments.

  Read the article

• Deadlock Analysis in NetBeans 8

  - by Geertjan

  Lock contention profiling is very important in multi-core environments. Lock contention occurs when a thread tries to acquire a lock while another thread is holding it, forcing it to wait. Lock contentions result in deadlocks. Multi-core environments have even more threads to deal with, causing an increased likelihood of lock contentions. In NetBeans 8, the NetBeans Profiler has new support for displaying detailed information about lock contention, i.e., the relationship between the threads that are locked. After all, whenever there's a deadlock, in any aspect of interaction, e.g., a political deadlock, it helps to be able to point to the responsible party or, at least, the order in which events happened resulting in the deadlock. As an example, let's take the handy Deadlock sample code from the Java Tutorial and look at the tools in NetBeans IDE for identifying and analyzing the code. The description of the deadlock is nice: Alphonse and Gaston are friends, and great believers in courtesy. A strict rule of courtesy is that when you bow to a friend, you must remain bowed until your friend has a chance to return the bow. Unfortunately, this rule does not account for the possibility that two friends might bow to each other at the same time. To help identify who bowed first or, at least, the order in which bowing took place, right-click the file and choose "Profile File". In the Profile Task Manager, make the choices below: When you have clicked Run, the Threads window shows the two threads are blocked, i.e., the red "Monitor" lines tell you that the related threads are blocked while trying to enter a synchronized method or block: But which thread is holding the lock? Which one is blocked by the other? The above visualization does not answer these questions. New in NetBeans 8 is that you can analyze the deadlock in the new Lock Contention window to determine which of the threads is responsible for the lock: Here is the code that simulates the lock, very slightly tweaked at the end, where I use "setName" on the threads, so that it's even easier to analyze the threads in the relevant NetBeans tools. Also, I converted the anonymous inner Runnables to lambda expressions. package org.demo; public class Deadlock { static class Friend { private final String name; public Friend(String name) { this.name = name; } public String getName() { return this.name; } public synchronized void bow(Friend bower) { System.out.format("%s: %s" + " has bowed to me!%n", this.name, bower.getName()); bower.bowBack(this); } public synchronized void bowBack(Friend bower) { System.out.format("%s: %s" + " has bowed back to me!%n", this.name, bower.getName()); } } public static void main(String[] args) { final Friend alphonse = new Friend("Alphonse"); final Friend gaston = new Friend("Gaston"); Thread t1 = new Thread(() -> { alphonse.bow(gaston); }); t1.setName("Alphonse bows to Gaston"); t1.start(); Thread t2 = new Thread(() -> { gaston.bow(alphonse); }); t2.setName("Gaston bows to Alphonse"); t2.start(); } } In the above code, it's extremely likely that both threads will block when they attempt to invoke bowBack. Neither block will ever end, because each thread is waiting for the other to exit bow. Note: As you can see, it really helps to use "Thread.setName", everywhere, wherever you're creating a Thread in your code, since the tools in the IDE become a lot more meaningful when you've defined the name of the thread because otherwise the Profiler will be forced to use thread names like "thread-5" and "thread-6", i.e., based on the order of the threads, which is kind of meaningless. (Normally, except in a simple demo scenario like the above, you're not starting the threads in the same class, so you have no idea at all what "thread-5" and "thread-6" mean because you don't know the order in which the threads were started.) Slightly more compact: Thread t1 = new Thread(() -> { alphonse.bow(gaston); },"Alphonse bows to Gaston"); t1.start(); Thread t2 = new Thread(() -> { gaston.bow(alphonse); },"Gaston bows to Alphonse"); t2.start();

  Read the article

• How to send email from an EC2 instance using GoDaddy's SMTP server?

  - by Matt Greer

  SMTP is a whole new ballgame for me, but I am reading up on it. I am attempting to send email from my EC2 instance using GoDaddy's SMTP server. My domain name is registered through GoDaddy and I have 2 email accounts with them. I can successfully send the email from my dev box no problem. my web.config <system.net> <mailSettings> <smtp from="[email protected]" deliveryMethod="Network"> <network host="smtpout.secureserver.net" clientDomain="mydomain.com" port="25" userName="[email protected]" password="mypassword" defaultCredentials="false" /> </smtp> </mailSettings> </system.net> In my ASP.NET app: MailMessage mailMessage = new MailMessage("[email protected]", recipientEmail, emailSubject, body); mailMessage.IsBodyHtml = false; SmtpClient mailClient = new SmtpClient(); mailClient.Send(mailMessage); Very typical, simple use of System.Net.Mail.SmtpClient. The mail client is picking up the settings from my web.config as expected. From the EC2 instance, the same setup yields: System.Net.Mail.SmtpException: Failure sending mail. ---> System.IO.IOException: Unable to read data from the transport connection: net_io_connectionclosed. at System.Net.Mail.SmtpReplyReaderFactory.ProcessRead(Byte[] buffer, Int32 offset, Int32 read, Boolean readLine) at System.Net.Mail.SmtpReplyReaderFactory.ReadLines(SmtpReplyReader caller, Boolean oneLine) at System.Net.Mail.SmtpReplyReaderFactory.ReadLine(SmtpReplyReader caller) at System.Net.Mail.SmtpConnection.GetConnection(ServicePoint servicePoint) at System.Net.Mail.SmtpClient.Send(MailMessage message) --- End of inner exception stack trace --- I have searched high and low and not found anyone else attempting this. All GoDaddy smtp situations I have found involve people being hosted by GoDaddy using their relay server. Some more info: My EC2 instance is Windows Server 2008 with IIS 7. The app is running in .NET 4 I can successfully use Gmail's SMTP server on the EC2 instance by using their port, setting SmtpClient.EnableSsl to true, and sending the mail through a gmail account. But we want to send the email from an account on our domain. I have port 25 open on both the Windows firewall and Amazon's Security group based firewall. I have played with Wireshark and noticed my SMTP related traffic was talking to ports in the 5,000s, so out of desperation I opened them all up to no avail (then closed them back down) As far as I know my EC2 instance's IP address is not black listed by GoDaddy. I have a feeling I'm just missing something fundamental. I also have a feeling someone is going to recommend I use AuthSmtp or something similar, I'll agree, and have had wasted the past 6 hours :)

  Read the article

• how do I register a custom conversion Service in spring 3 / webflow 2?

  - by nont

  I've been trying to follow this example and using the reference to guide me, but I'm having no luck. I've defined a converter: import org.springframework.binding.convert.converters.StringToObject; import java.text.DateFormat; import java.text.SimpleDateFormat; import java.text.ParseException; import java.util.Date; public class StringToDateTwoWayConverter extends StringToObject { private DateFormat format = null; public StringToDateTwoWayConverter () { super(StringToDateTwoWayConverter.class); format = new SimpleDateFormat("MM/dd/yyyy"); } @Override protected Object toObject(String string, Class targetClass) throws Exception { Date date = null; try { date = format.parse(string); } catch (ParseException e) { e.printStackTrace(); return null; } return date; } @Override protected String toString(Object object) throws Exception { Date date = (Date) object; return format.format(date); } } and a conversionService: import org.springframework.binding.convert.service.DefaultConversionService; import org.springframework.stereotype.Component; @Component("conversionService") public class ApplicationConversionService extends DefaultConversionService { @Override protected void addDefaultConverters() { super.addDefaultConverters(); this.addConverter(new StringToDateTwoWayConverter()); this.addConverter("shortDate", new StringToDateTwoWayConverter()); } } and configured it: <webflow:flow-builder-services id="flowBuilderServices" conversion-service="conversionService" .../> However, upon startup, I'm greeted with this exception: Caused by: org.springframework.beans.factory.UnsatisfiedDependencyException: Error creating bean with name '(inner bean)': Unsatisfied dependency expressed through constructor argument with index 0 of type [org.springframework.core.convert.ConversionService]: Could not convert constructor argument value of type [com.yadayada.converter.ApplicationConversionService] to required type [org.springframework.core.convert.ConversionService]: Failed to convert value of type 'com.yadayada.converter.ApplicationConversionService' to required type 'org.springframework.core.convert.ConversionService'; nested exception is java.lang.IllegalStateException: Cannot convert value of type [com.yadayada.converter.ApplicationConversionService] to required type [org.springframework.core.convert.ConversionService]: no matching editors or conversion strategy found at org.springframework.beans.factory.support.ConstructorResolver.createArgumentArray(ConstructorResolver.java:687) at org.springframework.beans.factory.support.ConstructorResolver.autowireConstructor(ConstructorResolver.java:195) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.autowireConstructor(AbstractAutowireCapableBeanFactory.java:993) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:897) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:485) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveInnerBean(BeanDefinitionValueResolver.java:270) ... 60 more I'm thoroughly puzzled why its not working. The conversion service implements ConversionService through its base class, so I don't see the problem. Any insight much appreciated!

  Read the article

• How to solve "The ChannelDispatcher is unable to open its IChannelListener" error?

  - by kyrisu

  Hi, I'm trying to communicate between WCF hosted in Windows Service and my service GUI. The problem is when I'm trying to execute OperationContract method I'm getting "The ChannelDispatcher at 'net.tcp://localhost:7771/MyService' with contract(s) '"IContract"' is unable to open its IChannelListener." My app.conf looks like that: <configuration> <system.serviceModel> <bindings> <netTcpBinding> <binding name="netTcpBinding"> <security> <transport protectionLevel="EncryptAndSign" /> </security> </binding> </netTcpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="MyServiceBehavior"> <serviceMetadata httpGetEnabled="true" httpGetUrl="http://localhost:7772/MyService" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="MyServiceBehavior" name="MyService.Service"> <endpoint address="net.tcp://localhost:7771/MyService" binding="netTcpBinding" bindingConfiguration="netTcpBinding" name="netTcp" contract="MyService.IContract" /> </service> </services> </system.serviceModel> Port 7771 is listening (checked using netstat) and svcutil is able to generate configs for me. Any suggestions would be appreciated. Stack trace from exception Server stack trace: at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter) at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) There's one inner exeption (but not under Exeption.InnerExeption but under Exeption.Detail.InnerExeption - ToString() method doesn't show that) A registration already exists for URI 'net.tcp://localhost:7771/MyService'. But my service have specified this URI only in app.config file nowhere else. In entire solution this URI apears in server once and client once.

  Read the article

• Entity Framework SaveChanges error details

  - by Marek Karbarz

  When saving changes with SaveChanges on a data context is there a way to determine which Entity causes an error? For example, sometimes I'll forget to assign a date to a non-nullable date field and get "Invalid Date Range" error, but I get no information about which entity or which field it's caused by (I can usually track it down by painstakingly going through all my objects, but it's very time consuming). Stack trace is pretty useless as it only shows me an error at the SaveChanges call without any additional information as to where exactly it happened. Note that I'm not looking to solve any particular problem I have now, I would just like to know in general if there's a way to tell which entity/field is causing a problem. Quick sample of a stack trace as an example - in this case an error happened because CreatedOn date was not set on IAComment entity, however it's impossible to tell from this error/stack trace [SqlTypeException: SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.] System.Data.SqlTypes.SqlDateTime.FromTimeSpan(TimeSpan value) +2127345 System.Data.SqlTypes.SqlDateTime.FromDateTime(DateTime value) +232 System.Data.SqlClient.MetaType.FromDateTime(DateTime dateTime, Byte cb) +46 System.Data.SqlClient.TdsParser.WriteValue(Object value, MetaType type, Byte scale, Int32 actualLength, Int32 encodingByteSize, Int32 offset, TdsParserStateObject stateObj) +4997789 System.Data.SqlClient.TdsParser.TdsExecuteRPC(_SqlRPC[] rpcArray, Int32 timeout, Boolean inSchema, SqlNotificationRequest notificationRequest, TdsParserStateObject stateObj, Boolean isCommandProc) +6248 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +987 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +162 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) +32 System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) +141 System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) +12 System.Data.Common.DbCommand.ExecuteReader(CommandBehavior behavior) +10 System.Data.Mapping.Update.Internal.DynamicUpdateCommand.Execute(UpdateTranslator translator, EntityConnection connection, Dictionary`2 identifierValues, List`1 generatedValues) +8084396 System.Data.Mapping.Update.Internal.UpdateTranslator.Update(IEntityStateManager stateManager, IEntityAdapter adapter) +267 [UpdateException: An error occurred while updating the entries. See the inner exception for details.] System.Data.Mapping.Update.Internal.UpdateTranslator.Update(IEntityStateManager stateManager, IEntityAdapter adapter) +389 System.Data.EntityClient.EntityAdapter.Update(IEntityStateManager entityCache) +163 System.Data.Objects.ObjectContext.SaveChanges(SaveOptions options) +609 IADAL.IAController.Save(IAHeader head) in C:\Projects\IA\IADAL\IAController.cs:61 IA.IAForm.saveForm(Boolean validate) in C:\Projects\IA\IA\IAForm.aspx.cs:198 IA.IAForm.advance_Click(Object sender, EventArgs e) in C:\Projects\IA\IA\IAForm.aspx.cs:287 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +118 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +112 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5019

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >