Search Results

Search found 29567 results on 1183 pages for 'network tools'.

Page 85/1183 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • Hardening network with sysctl settings made Wi-fi downloading speed extremely slow

    - by Rohit Bansal
    I just followed up following steps to harden network security The /etc/sysctl.conf file contain all the sysctl settings. Prevent source routing of incoming packets and log malformed IP's enter the following in a terminal window: sudo vi /etc/sysctl.conf Edit the `/etc/sysctl.conf` file and un-comment or add the following lines : # IP Spoofing protection net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Ignore ICMP broadcast requests net.ipv4.icmp_echo_ignore_broadcasts = 1 # Disable source packet routing net.ipv4.conf.all.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv6.conf.default.accept_source_route = 0 # Ignore send redirects net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 # Block SYN attacks net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_max_syn_backlog = 2048 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syn_retries = 5 # Log Martians net.ipv4.conf.all.log_martians = 1 net.ipv4.icmp_ignore_bogus_error_responses = 1 # Ignore ICMP redirects net.ipv4.conf.all.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv6.conf.default.accept_redirects = 0 # Ignore Directed pings net.ipv4.icmp_echo_ignore_all = 1 To reload sysctl with the latest changes, enter: sudo sysctl -p But, after applying the changes I found "Wi-fi" downloading speed and terminal downloading speed extremely slow (less than 1KB/s) however surfing speed through browser was good. But, using direct ethernet cable was giving a good speed. Then, I reverted back the above changes and things fall back in line once again.... Could you please let me know what possibly in above script is affecting such behaviour [and why] ? How could I still maintain hardening of network security without disturbing Wi-fi downloading speed ?

    Read the article

  • Windows 7 "Backup completed but some files were skipped"

    - by Andrew Coleson
    I set up Windows 7 Pro to backup my files to a network path (woohoo!) and chose to backup "data for newly created users, libraries", and my user folder (no system image). All went fine (although the first backup took ~12 hours for some ridiculous reason), but at the end it gave me a message that "Your backup completed, but some files were skipped. Click to see which files." I checked and the "files" skipped were my 3 network-mapped drives, which is perfectly fine and reasonable behavior (I certainly don't need it to back up my network-mapped drives as part of my local PC backup), but in the Backup and Restore center it warns me that my Last backup was "Never" and the Action Center now has a permanent "Check your backup results" issue. Is there any way to set up the backup to exclude the network-mapped drives or tell it that I really don't mind that it skipped drives I never asked it to back up?

    Read the article

  • install pymedia and python audio tools

    - by aaron
    I noticed a pattern of errors while trying to install PyMedia and Python Audio Tools. For both modules I run the following: $ python setup.py install Then I get a series of compilation errors, and then this: lipo: can't figure out the architecture type of: /var/folders/Kx/Kxxj4868HGi6VMhZLPyZN++++TI/-Tmp-//cch1y9AO.out error: command '/usr/bin/gcc-4.2' failed with exit status 1 I'm running Mac OS X 10.5, and this happens whether I'm using gcc-4.0 or gcc-4.2, Mac-Python 2.5 or 2.6, and MacPorts-Python 2.6. What's going on?

    Read the article

  • Tool for Network game party

    - by nXqd
    I'm looking for tools for a network game party ( LAN ) .This is my first time I join as a tech-support for this party. I already know some tools like Desktop Sharing, Desktop lock . Anyone suggest more tools ? And links are appreciated :)

    Read the article

  • Amazon S3 tools for Debian?

    - by Jonik
    I need to (programmatically, in a shell script) upload an EAR file to an Amazon S3 bucket on Debian (5.0.4). What, if any, Debian package provides simple, scriptable tools for that? (I want raw S3 bucket access, so please don't suggest solutions like Jungle Disk.)

    Read the article

  • Using VLANs that are routed together?

    - by dannymcc
    I have a quick question that's bugging me the more I read about VLANs. So far I understand that they are useful for dividing the network into sub-sections, but if you route them together does that not remove any security benefit? As an example, if I created a VLAN on my home network which was simply one computer, one server and one router.if I wanted to divide the network between computers and servers I could put the computer on VLAN 10 and the server on VLAN 20. Then the computer would no longer be able to communicate with the server - unless I added a static route to the router that connected the two together, basically telling VLAN 10 that VLAN 20 exists and how to communicate with it. The VLANs would then be connected in a similar way to a 'flat' network that has no VLANs. Therefore, surely, all security benefits are lost. Am I missing something?

    Read the article

  • How can access files on shared drive from Windows 2008 server configured with SFTP

    - by communicator
    I have installed OpenSSH on my windows 2008 server by following the user guide here . Now I have some files on windows network share with UNC path as \\corp\test\testdata I want map this file system on network share to my windows 2008 server which is configred with SFTP so that I can access these files from my Java Program by doing SFTP to windows 2008 server.Is there anyway I can map the network share to C or other drive in server so that all the files on the share will be available as local files on the server?

    Read the article

  • problem with Webmaster Google Sitemap

    - by Alex
    I have a wp mu 3.6.1 with domain mapping (0.5.4.3) with w3tc (0.9.3) and Google XML Sitemaps (4.0 BETA). I have 4 different sitemaps. sub-1.com/sitemap.xml sub-2.com/sitemap.xml sub-3.com/sitemap.xml sub-4.com/sitemap.xml on google webmaster i got 59 errors & 14 warnings. Sitemap errorsErrors: We encountered an error while trying to access your Sitemap. Please ensure your Sitemap follows our guidelines and can be accessed at the location you provided and then resubmit. General HTTP error: 404 not found Sitemap: sub-2.com/sitemap-pt-post-2011-02.xml etc (but when i click on my sitemap links they work fine) Sitemap errorsWarnings: URLs not accessible When we tested a sample of the URLs from your Sitemap, we found that some URLs were not accessible to Googlebot due to an HTTP status error. All accessible URLs will still be submitted. Sitemap: sub-2.com/sitemap-misc.xml HTTP Error: 404 URL: /sitemap.html (but when i click on my sitemap links they work fine) Sitemap errorsIndex errors URLs not accessible When we tested a sample of the URLs from your Sitemap, we found that some URLs were not accessible to Googlebot due to an HTTP status error. All accessible URLs will still be submitted. HTTP Error: 404 URL: /sitemap-pt-post-2010-09.xml (but when i click on my sitemap links they work fine) Web pages 3,276 Submitted 3,247 Indexed what do I have to put on network adminperformance(w3tc)page cachecache preloadSitemap URL: ? i have add "/sitemap.xml" my robots.txt: http://pastebin.com/3K2U0mQa my .htaccess: http://pastebin.com/efJJ6zwy How can I make it work right?

    Read the article

  • Can't access to Ubuntu Shared Folder from Windows XP

    - by See hyung Lee
    I've set up a Ubuntu Shared Folder for around 70 users. They all use XP and most of them can access to the folder. Only few encounter some error message when they try to access to it. is not accessible. you might not have permission to use this network resource the network is not present or not started All 70 users same version of XP and in 192.168.1.0 /24 network. What'd be the problem?

    Read the article

  • E-mail spam analyzing tools

    - by goran
    I have some mail logs, for which I assume that come from our hosted mail server antivirus: 1, antispam: 1, sanesecurity: 1, chkuser: 1, chkrbl: 1, chkmx: 1, chkptr: 0, greylistlevel: 0, rejectemptyfrom: 1, spamscore: 7.00, redirectspam: 1, maxrcpt: 30, maxdatabytes: 50000000, nightguard: 0, whitelistsigned: 1 (+ info on each message score) as plain text files. I was wondering if anyone knows which tool produce such logs and if there are any tools that would parse and analyze the logs?

    Read the article

  • database scanning tools recommendation?

    - by stock99
    Lately my boss is asking me to looking into database scanners. I know very little about db scanning technology. Just wondering if it is worth to purchase tools like Sentrigo ( http://www.mcafee.com/us/about/sentrigo.aspx ) ? Does anyone have experience of using database scanner? Also, I'd like to know if there is any limitation on it. We already conducting internal OS and web scan on regular basis, by the way.

    Read the article

  • Is there an equivalent command for 'init.d/networking restart' in OS X

    - by l0c0b0x
    From time to time, I've encountered issues with OS X clients' network connections (Wired and Wireless, Leopard/Snow Leopard) where nothing will fix the issue, until you reboot. Is there a particular 'network service/process' I should be watching out for? I was thinking it would be useful to know of a command that will reset a 'network connection' type service/process (same as running a sudo /etc/init.d/networking restart). Thanks!

    Read the article

  • What constitutes a "substantial, good-faith effort to remove the links"

    - by Luke McCallum
    We engaged the services of a 3rd party SEO consultant to assist us in managing our Meta data and to write regular blogs on our site http://cyberdesignworks.com.au Without our authorisation, the SEO also ran a link building campaign which has seen us Penguin slapped and we no longer appear in Google for a number of our core keywords. Since notification by Google that we have "unnatural links" back in March we have undertaken a significant campaign to rid ourselves of these dodgy backlinks by a number of methods. I have just received feedback on my 4th or 5th resubmission which is still advising that we need to make a "substantial, good-faith effort to remove the links" before Google will reconsider us for inclusion. After the effort that I have gone through to get links removed, I am now at a loss as to what else I can do to demonstrate "substantial, good-faith effort to remove the links". Below is a summary of the actions that we have taken to date. According to http://removem.com we had about 5584 back-linking domains. Of those we have successfully contacted and had removed links from 344 domains We ignored links from 625 domains as they were either legitimate press releases, natural backlinks or client websites containing an attribution link in the footer that points back to us. Due to our efforts, or the sites simply becoming defunct, removem.com reports that links from 3262 domains have been removed. We have contacted but are yet to receive feedback from 1666 domains so we can assume that the backlinks remain. We have configured an automatic 301 redirect for each of the links from these 1666 domains to point to http://redirects.sanscode.com/ which we are calling our Bad Link Catcher (a stroke of genius I thought). i.e http://www.mysimplewebdesign.com/create-a-perfect-webpage-with-four-important-tips-from-sydney-web-development-service-companies.php As we are a web design agency, we have a large number of client websites which contain an attribution link in their footer which points back to us. We have gone through the vast majority of these and updated these links to replace anchor text with an image and rel="nofollow" link. i.e <a rel="nofollow" target="_blank" href="http://www.cyberdesignworks.com.au/"><img src="https://sessions.sanscode.com/site/assets/media/badges/Badge_CDW_SANSCODE.png"></a> See http://www.milkatwork.com.au/ An export from http://removem.com detailing the number of times we have contacted each link and whether it is still found or not was also supplied with each resubmission. The total back links reported in Google Web Master Tools has dropped from over 100K to 87K and I expect it to drop significantly lower once Google re-crawls each back-linking page. Based on all of the above, I am not sure what else I can do to to demonstrate a "substantial, good-faith effort to remove the links". I would sincerely appreciate any feedback or suggestions that you may have as I am out of ideas.

    Read the article

  • Getting my brother MFC-J825DW working as a network scanner

    - by AntonChanning
    I've been attempting to set up my new brother multi-function device to work as a printer and scanner using the following steps. It is connected to the network as a LAN device, not directly connected to my ubuntu machine. Downloaded the lpr driver and cupswrapper driver from Brother support. (Select the deb packages, not the rpms). Followed the instructions to install the lpr driver. Followed the instructions to install the cupswrapper driver. After this point I was able to successfully perform a test print, so the printer part is working. So far I haven't had much luck getting the scanner working. This is what I've tried: Downloaded the brscan4 and scan-key-tool deb packages from brother support. Followed the instructions for installing the scanner driver for network. Followed the instructions for installing scan-key-tool. However when I tried to scan it detects no scanner. I then tried the solution offered in this answer to a question based on a similar brother printer, but no luck. I must have made a mistake somewhere along the line. Does anyone have any ideas what I can try to find out what? Or should I uninstall everything and start again from the beginning?

    Read the article

  • How have multiple web servers and IPs on the same physical network

    - by jsigned
    I do web development out of a small office and need to have multiple physical and virtual servers that can be accessed from the internet. I also have a number of devices (computers, laptops, tablets, printers, etc) that need connections as well. I have gotten a subnet of 8 IP's from my ISP and while that is adequate for the web servers its far too small for everything that needs access to the network. My router is an ASUS RT-N16 running DD-WRT. I'm just smart enough about this routing topic to be dangerous, think 2 year old with a magic marker. I would like to keep my internal network NAT'ed on the 192.168.x.x network and route the 68.69.x.x 255.255.255.248 traffic directly to the servers. The physical network consists of the 4 port DD-WRT router and an unmanaged gig switch. I have a fiber connection to the office that works as an Ethernet port. In other words I can plug my laptop directly into it and have access to the internet. There is no login or password and the router is setup to get DHCP from the ISP, and to provide DHCP addresses for the internal network. What I've done so far is google and try different configurations with little success. In the end I decided I didn't even know how to ask the questions needed. My questions are: Is this the best way to configure the network? How do you do it? VLANs? Multiple routers? I've never had to configure a router using anything more than the GUI so if this is command line stuff be gentle.

    Read the article

  • Find a Faster DNS Server with Namebench

    - by Mysticgeek
    One way to speed up your Internet browsing experience is using a faster DNS server. Today we take a look at Namebench, which will compare your current DNS server against others out there, and help you find a faster one. Namebench Download the file and run the executable (link below). Namebench starts up and will include the current DNS server you have configured on your system. In this example we’re behind a router and using the DNS server from the ISP. Include the global DNS providers and the best available regional DNS server, then start the Benchmark. The test starts to run and you’ll see the queries it’s running through. The benchmark takes about 5-10 minutes to complete. After it’s complete you’ll get a report of the results. Based on its findings, it will show you what DNS server is fastest for your system. It also displays different types of graphs so you can get a better feel for the different results. You can export the results to a .csv file as well so you can present the results in Excel. Conclusion This is a free project that is in continuing development, so results might not be perfect, and there may be more features added in the future. If you’re looking for a method to help find a faster DNS server for your system, Namebench is a cool free utility to help you out. If you’re looking for a public DNS server that is customizable and includes filters, you might want to check out our article on helping to protect your kids from questionable content using OpenDNS. You can also check out how to speed up your web browsing with Google Public DNS. Links Download NameBench for Windows, Mac, and Linux from Google Code Learn More About the Project on the Namebench Wiki Page Similar Articles Productive Geek Tips Open a Second Console Session on Ubuntu ServerShare Ubuntu Home Directories using SambaSetup OpenSSH Server on Ubuntu LinuxDisable the Annoying “This device can perform faster” Balloon Message in Windows 7Search For Rows With Special Characters in SQL Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app

    Read the article

  • Getting mybrother MFC-J825DW working as a network scanner

    - by AntonChanning
    I've been attempting to set up my new brother multi-function device to work as a printer and scanner using the following steps. It is connected to the network as a LAN device, not directly connected to my ubuntu machine. Downloaded the lpr driver and cupswrapper driver from Brother support. (Select the deb packages, not the rpms). Followed the instructions to install the lpr driver. Followed the instructions to install the cupswrapper driver. After this point I was able to successfully perform a test print, so the printer part is working. So far I haven't had much luck getting the scanner working. This is what I've tried: Downloaded the brscan4 and scan-key-tool deb packages from brother support. Followed the instructions for installing the scanner driver for network. Followed the instructions for installing scan-key-tool. However when I tried to scan it detects no scanner. I then tried the solution offered in this answer to a question based on a similar brother printer, but no luck. I must have made a mistake somewhere along the line. Does anyone have any ideas what I can try to find out what? Or should I uninstall everything and start again from the beginning?

    Read the article

  • Wireless shows up as disabled, how can I get it working?

    - by Lazer
    $ sudo iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off pan0 no wireless extensions. $ This is what pops up when I click the two computers icon What should I do to get Wifi working on this machine? $ sudo ifconfig wlan0 up SIOCSIFFLAGS: No such file or directory $ $ lspci | tail 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) $

    Read the article

  • Why do Linux networks use Samba?

    - by Dougal
    The "file and printer sharing" feature of Linux distros is mostly Samba. Samba is an interpretation of Microsoft's network filesystem. Cross-OS compatibility is important of course but why are Linux systems defaulting to this Microsoft technology? Is Microsoft's network filesystem so good? Samba clearly works very well and I'm not "dissing" it. Or, to rephrase the question, "What would be a Linux-native way to share files and printers across a network?"

    Read the article

  • Wireless shows up as disabled, how can I get it working?

    - by Lazer
    $ sudo iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off pan0 no wireless extensions. $ This is what pops up when I click the two computers icon What should I do to get Wifi working on this machine? $ sudo ifconfig wlan0 up SIOCSIFFLAGS: No such file or directory $ $ lspci | tail 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) $

    Read the article

  • Pluscom MAC address shows up but "wireless unavailable"

    - by Luigi
    I've got a pluscom pci card plugged into my desktop and although the mac address shows up in network manager, it says "Wireless unavailable". I'm using Ubuntu 12.10 Gnome Shell Remix... edgar@edgarQuantal:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off edgar@edgarQuantal:~$ ifconfig eth0 Link encap:Ethernet HWaddr 6c:f0:49:02:1f:b8 inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fe02:1fb8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1425 errors:0 dropped:0 overruns:0 frame:0 TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:995753 (995.7 KB) TX bytes:134079 (134.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:363 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:40828 (40.8 KB) TX bytes:40828 (40.8 KB) It looks the same as the problem as here, seems quite complicated: http://ubuntuforums.org/showthread.php?t=1993226 Tried downloading the driver but i get this: "Unpacking firmware-ralink (from .../firmware-ralink_0.36_all.deb) ... dpkg: error processing /home/edgar/Downloads/firmware-ralink_0.36_all.deb (--install): trying to overwrite '/lib/firmware/rt2870.bin', which is also in package linux-firmware 1.95"

    Read the article

  • What FOSS solutions are available to manage software requirements?

    - by boos
    In the company where I work, we are starting to plan to be compliant to the software development life cycle. We already have, wiki, vcs system, bug tracking system, and a continuous integration system. The next step we want to have is to start to manage, in a structured way, software requirements. We dont want to use a wiki or shared documentation because we have many input (developer, manager, commercial, security analyst and other) and we dont want to handle proliferation of .doc around the network share. We are trying to search and we hope we can find and use a FOSS software to manage all this things. We have about 30 people, and don't have a budget for commercial software. We need a free solution for requirements management. What we want is software that can manage: Required features: Software requirements divided in a structured configurable way Versioning of the requirements (history, diff, etc, like source code) Interdependency of requirements (child of, parent of, related to) Rule Based Access Control for data handling Multi user, multi project File upload (for graph, document related to or so on) Report and extraction features Optional Features: Web Based Test case Time based management (timeline, excepted data, result data) Person allocation and so on Business related stuff Hardware allocation handling I have already play with testlink and now i'm playing with RTH, the next one i try is redmine.

    Read the article

  • Set up ad hoc wireless connection between Windows Vista and Mac OS X

    - by Skarab
    I have the following problem - Windows Vista does not connect to adhoc wireless network created on my Macbook. I have tried to create secured (with 40 bit key) and unsecured network but Windows Vista still has problems to connect. Windows VISTA informs me -- after 5 minutes of attempts - that setting up the connection -- with my adhoc network -- took too much time. My question: do I need to configure some settings on Vista to connect it to my Macbook? Maybe it is a problem with DHCP? Edited: I have tried the other way: http://superuser.com/questions/202890/set-up-an-adhoc-network-in-windows-vista-to-connect-to-and-share-the-internet-con

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >