Search Results

Search found 2717 results on 109 pages for 'tricks of the trade'.

Page 85/109 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • How do I get any number of links to space evenly? [migrated]

    - by Aerodynamo
    Alright, so here is the situation... Say I have a navbar for a site, and I allow users to change the number of links they want on this navbar. This means they could have 3, 5, 10, etc. What I want to do is make it so that if one link is up, it only takes up, say, 1/5th of the space on the navbar. If I weren't using borders, I might do something like: width: 18%; padding: 0 1%; However, I have two problems with this: 1) For 4 buttons, that's fine that it doesn't fill up the whole row. It would look ugly if the links were too wide... but when I have 6 or 7 buttons, it's got huge overflow! 2) Since I have borders, I can't use a percentage value for the borders or the widths, because I can't properly estimate how much of the percentage it will be. Now, I know I don't have to use percentage values, but what I would ideally prefer is that the first button is the smallest possible size necessary for all the other buttons to fit properly, meaning that if I have 950px and 6 links, the first link can be about 150px while the others are 160px... that's fine. I want all the other buttons on the navbar to be equally sized, regardless of how many links there are. I also need for it to accept a border... I figure the way to do this is to put a border in the nested div, so that way it doesn't effect the overall width of the button? This is all well and good, but I'm still plagued by the issue of not being able to design a dynamic site using the style I want if I can't get all the nav buttons to fit the width properly. Are there some js tricks I could use? I don't even know... Thanks

    Read the article

  • No Properties path set - looking in classpath

    - by Will
    For whatever reason my project has decided it cannot find my transaction.properties file. It is located in the : src/main/resource However it looks in looks in target/classes/ The file also resides yet throws the errors(see below) These all seem to stem from the whole in the init of code I have no acces to which is always fun. Anyone have any idea how to get past the whole: Using init file: /target/classes/transactions.properties com.atomikos.icatch.SysException: Error in init: Error during checkpointing at com.atomikos.icatch.imp.TransactionServiceImp.init(TransactionServiceImp.java:728) EDIT: The errors are mainly pointing at the atomikos path. I'll be honest I'm at a total loss as to what is actually happening under the hood so. It's rather melting. The two files are the same so it shouldn't really matter which file it uses, however I can view the first error line reference. public synchronized void init ( Properties properties ) throws SysException { Stack errors = new Stack (); this.properties_ = properties; try { recoverymanager_.init (); } catch ( LogException le ) { errors.push ( le ); throw new SysException ( "Error in init: " + le.getMessage (), errors ); } recoverCoordinators (); //initialized is now set in recover() //initialized_ = true; shuttingDown_ = false; control_ = new LogControlImp ( this ); // call recovery already, to make sure that the // RMI participants can start inquiring and replay recover (); notifyListeners ( true, false ); } Full error printout: Using init file: /target/classes/transactions.properties com.atomikos.icatch.SysException: Error in init: Error during checkpointing at com.atomikos.icatch.imp.TransactionServiceImp.init(TransactionServiceImp.java:728) at com.atomikos.icatch.imp.BaseTransactionManager.init(BaseTransactionManager.java:217) at com.atomikos.icatch.standalone.StandAloneTransactionManager.init(StandAloneTransactionManager.java:104) at com.atomikos.icatch.standalone.UserTransactionServiceImp.init(UserTransactionServiceImp.java:307) at com.atomikos.icatch.config.UserTransactionServiceImp.init(UserTransactionServiceImp.java:413) at com.atomikos.icatch.jta.UserTransactionManager.checkSetup(UserTransactionManager.java:90) at com.atomikos.icatch.jta.UserTransactionManager.init(UserTransactionManager.java:140) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:93) at com.citi.eq.mo.dcc.server.Main.main(Main.java:32) Nested exception is: com.atomikos.persistence.LogException: Error during checkpointing at com.atomikos.persistence.imp.FileLogStream.writeCheckpoint(FileLogStream.java:229) at com.atomikos.persistence.imp.StreamObjectLog.init(StreamObjectLog.java:185) at com.atomikos.persistence.imp.StateRecoveryManagerImp.init(StateRecoveryManagerImp.java:71) at com.atomikos.icatch.imp.TransactionServiceImp.init(TransactionServiceImp.java:725) at com.atomikos.icatch.imp.BaseTransactionManager.init(BaseTransactionManager.java:217) at com.atomikos.icatch.standalone.StandAloneTransactionManager.init(StandAloneTransactionManager.java:104) at com.atomikos.icatch.standalone.UserTransactionServiceImp.init(UserTransactionServiceImp.java:307) at com.atomikos.icatch.config.UserTransactionServiceImp.init(UserTransactionServiceImp.java:413) at com.atomikos.icatch.jta.UserTransactionManager.checkSetup(UserTransactionManager.java:90) at com.atomikos.icatch.jta.UserTransactionManager.init(UserTransactionManager.java:140) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:93) at com.citi.eq.mo.dcc.server.Main.main(Main.java:32) 08/05/2011 14:55:59.998 [main] [] [INFO ] [o.s.b.f.s.DefaultListableBeanFactory] Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@164dbd5: defining beans [gfiPropertyConfigurerCommon,org.springframework.context.annotation.internalConfigurationAnnotationProcessor,org.springframework.context.annotation.internalAutowiredAnnotationProcessor,org.springframework.context.annotation.internalRequiredAnnotationProcessor,org.springframework.context.annotation.internalCommonAnnotationProcessor,org.springframework.context.annotation.internalPersistenceAnnotationProcessor,ZtsListenerContainer,ztsMessageListener,dccMessageHandler,dccToRioPublisher,rioJmsTemplate,dccMessageTransformer,ztsFixtoRioTransformer,dateManager,ztsDropCopyConverterContextFactory,ZtsBlockListenerContainer,ztsblockdropCopyConverterContextFactory,ZasListenerContainer,zasMessageListener,zastoRIOMessageTransformer,zasDropCopyConverterContextFactory,ztsToDccJndiTemplate,ztsQcf,ztsBlockToDccJndiTemplate,ztsBlockQcf,zasToDccJndiTemplate,zasQcf,rioJndiTemplate,rioTcf,rioDestinationResolver,URO.ZTSTRADES.1_Producer,mbeanServer,jmxExporter,rules-execution-server-engine,rio-object,trade-validator-context,trade-validator,validation-rules-helper,javaxTransactionManager,javaxUserTransaction,springPlatformTransactionManager,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,org.springframework.scheduling.annotation.internalAsyncAnnotationProcessor,org.springframework.scheduling.annotation.internalScheduledAnnotationProcessor]; root of factory hierarchy 08/05/2011 14:56:00.013 [main] [] [INFO ] [o.s.jmx.export.MBeanExporter] Unregistering JMX-exposed beans on shutdown Exception in thread "main" org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'javaxTransactionManager' defined in class path resource [eq-mo-dcc-server-context.xml]: Invocation of init method failed; nested exception is com.atomikos.icatch.SysException: Error in init(): Error in init: Error during checkpointing at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:93) at com.citi.eq.mo.dcc.server.Main.main(Main.java:32) Caused by: com.atomikos.icatch.SysException: Error in init(): Error in init: Error during checkpointing at com.atomikos.icatch.standalone.UserTransactionServiceImp.init(UserTransactionServiceImp.java:374) at com.atomikos.icatch.config.UserTransactionServiceImp.init(UserTransactionServiceImp.java:413) at com.atomikos.icatch.jta.UserTransactionManager.checkSetup(UserTransactionManager.java:90) at com.atomikos.icatch.jta.UserTransactionManager.init(UserTransactionManager.java:140) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417) ... 12 more Caused by: com.atomikos.icatch.SysException: Error in init: Error during checkpointing at com.atomikos.icatch.imp.TransactionServiceImp.init(TransactionServiceImp.java:728) at com.atomikos.icatch.imp.BaseTransactionManager.init(BaseTransactionManager.java:217) at com.atomikos.icatch.standalone.StandAloneTransactionManager.init(StandAloneTransactionManager.java:104) at com.atomikos.icatch.standalone.UserTransactionServiceImp.init(UserTransactionServiceImp.java:307) ... 22 more

    Read the article

  • Stop Spinning Your Wheels&hellip; Sage Advice for Aspiring Developers

    - by Mark Rackley
    So… lately I’ve been tasked with helping bring some non-developers over the hump and become full-fledged, all around, SharePoint developers. Well, only time will tell if I’m successful or a complete failure. Good thing about failures though, you know what NOT to do next time! Anyway, I’ve been writing some sort of code since I was about 10 years old; so I sometimes take for granted the effort some people have to go through to learn a new technology. I guess if I had to say I was an “expert” in one thing it would be learning (and getting “stuff” done) in new technologies. Maybe that’s why I’ve embraced SharePoint and the SharePoint community. SharePoint is the first technology I haven’t been able to master or get everything done without help from other people. I KNOW I’ll never know it all and I learn something new every day.  It keeps it interesting, it keeps me motivated, and keeps me involved. So, what some people may consider a downside of SharePoint, I definitely consider a plus. Crap.. I’m rambling. Where was I? Oh yeah… me trying to be helpful. Like I said, I am able to quickly and effectively pick up new languages, technology, etc. and put it to good use. Am I just brilliant? Well, my mom thinks so.. but maybe not. Maybe I’ve just been doing it for a long time…. 25 years in some form or fashion… wow I’m old… Anyway, what I lack in depth I make up for in breadth and being the “go-to” guy wherever I work when someone needs to “get stuff done”.  Let’s see if I can take some of that experience and put it to practical use to help new people get up to speed faster, learn things more effectively, and become that go-to guy. First off…  make sure you… Know The Basics I don’t have the time to teach new developers the basics, but you gotta know them. I’ve only been “taught” two languages.. Fortran 77 and C… everything else I’ve picked up from “doing”. I HAD to know the basics though, and all new developers need to understand the very basics of development.  97.23% of all languages will have the following: Variables Functions Arrays If statements For loops / While loops If you think about it, most development is “if this, do this… or while this, do this…”.  “This” may be some unique method to your language or something you develop, but the basics are the basics. YES there are MANY other development topics you need to understand, but you shouldn’t be scratching your head trying to figure out what a ”for loop” is… (Also learn about classes and hashtables as quickly as possible). Once you have the basics down it makes it much easier to… Learn By Doing This may just apply to me and my warped brain.  I don’t learn a new technology by reading or hearing someone speak about it. I learn by doing. It does me no good to try and learn all of the intricacies of a new language or technology inside-and-out before getting my hands dirty. Just show me how to do one thing… let me get that working… then show me how to do the next thing.. let me get that working… Now, let’s see what I can figure out on my own. Okay.. now it starts to make sense. I see how the language works, I can step through the code, and before you know it.. I’m productive in a new technology. Be careful here though…. make sure you… Don’t Reinvent The Wheel People have been writing code for what… 50+ years now? So, why are you trying to tackle ANYTHING without first Googling it with Bing to see what others have done first? When I was first learning C# (I had come from a Java background) I had to call a web service.  Sure! No problem! I’d done this many times in Java. So, I proceeded to write an HTTP Handler, called the Web Service and it worked like a charm!!!  Probably about 2.3 seconds after I got it working completely someone says to me “Why didn’t you just add a Web Reference?” Really? You can do that?  oops… I just wasted a lot of time. Before undertaking the development of any sort of utility method in a new language, make sure it’s not already handled for you… Okay… you are starting to write some code and are curious about the possibilities? Well… don’t just sit there… Try It And See What Happens This is actually one of my biggest pet peeves. “So… ‘x++’ works in C#, but does it also work in JavaScript?”   Really? Did you just ask me that? In the time it spent for you to type that email, press the send button, me receive the email, get around to reading it, and replying with “yes” you could have tested it 47 times and know the answer! Just TRY it! See what happens! You aren’t doing brain surgery. You aren’t going to kill anyone, and you BETTER not be developing in production. So, you are not going to crash any production systems!! Seriously! Get off your butt and just try it yourself. The extra added benefit is that it doesn’t work, the absolute best way to learn is to… Learn From Your Failures I don’t know about you… but if I screw up and something doesn’t work, I learn A LOT more debugging my problem than if everything magically worked. It’s okay that you aren’t perfect! Not everyone can be me? In the same vein… don’t ask someone else to debug your problem until you have made a valiant attempt to do so yourself. There’s nothing quite like stepping through code line by line to see what it’s REALLY doing… and you’ll never feel more stupid sometimes than when you realize WHY it’s not working.. but you realize... you learn... and you remember. There is nothing wrong with failure as long as you learn from it. As you start writing more and more and more code make sure that you ALWAYS… Develop for Production You will soon learn that the “prototype” you wrote last week to show as a “proof of concept” is going to go directly into production no matter how much you beg and plead and try to explain it’s not ready to go into production… it’s going to go straight there.. and it’s like herpes.. it doesn’t go away and there’s no fixing it once it’s in there.  So, why not write ALL your code like it will be put in production? It MIGHT take a little longer, but in the long run it will be easier to maintain, get help on, and you won’t be embarrassed that it’s sitting on a production server for everyone to use and see. So, now that you are getting comfortable and writing code for production it is important to to remember the… KISS Principle… Learn It… Love It… Keep It Simple Stupid Seriously.. don’t try to show how smart you are by writing the most complicated code in history. Break your problem up into discrete steps and write each step. If it turns out you have some redundancy, you can always go back and tweak your code later.  How bad is it when you write code that LOOKS cocky? I’ve seen it before… some of the most abstract and complicated classes when a class wasn’t even needed! Or the most elaborate unreadable code jammed into one really long line when it could have been written in three lines, performed just as well, and been SOOO much easier to maintain. Keep it clear and simple.. baby steps people. This will help you learn the technology, debug problems, AND it will help others help you find your problems if they don’t have to decipher the Dead Sea Scrolls just to figure out what you are trying to do…. Really.. don’t be that guy… try to curb your ego and… Keep an Open Mind No matter how smart you are… how fast you type… or how much you get paid, don’t let your ego get in the way. There is probably a better way to do everything you’ve ever done. Don’t become so cocky that you can’t think someone knows more than you. There’s a lot of brilliant, helpful people out there willing to show you tricks if you just give them a chance. A very super-awesome developer once told me “So what if you’ve been writing code for 10 years or more! Does your code look basically the same? Are you not growing as a developer?” Those 10 years become pretty meaningless if you just “know” that you are right and have not picked up new tips, tricks, methods, and patterns along the way. Learn from others and find out what’s new in development land (you know you don’t have to specifically use pointers anymore??). Along those same lines… If it’s not working, first assume you are doing something wrong. You have no idea how much it annoys people who are trying to help you when you first assume that the help they are trying to give you is wrong. Just MAYBE… you… the person learning is making some small mistake? Maybe you didn’t describe your problem correctly? Maybe you are using the wrong terminology? “I did exactly what you said and it didn’t work.”  Oh really? Are you SURE about that? “Your solution doesn’t work.”  Well… I’m pretty sure it works, I’ve used it 200 times… What are you doing differently? First try some humility and appreciation.. it will go much further, especially when it turns out YOU are the one that is wrong. When all else fails…. Try Professional Training Some people just don’t have the mindset to go and figure stuff out. It’s a gift and not everyone has it. If everyone could do it I wouldn’t have a job and there wouldn’t be professional training available.  So, if you’ve tried everything else and no light bulbs are coming on, contact the experts who specialize in training. Be careful though, there is bad training out there. Want to know the names of some good places? Just shoot me a message and I’ll let you know. I’m boycotting endorsing Andrew Connell anymore until I get that free course dangit!! So… that’s it.. that’s all I got right now. Maybe you thought all of this is common sense, maybe you think I’m smoking crack. If so, don’t just sit there, there’s a comments section for a reason. Finally, what about you? What tips do you have to help this aspiring to learn the dark arts??

    Read the article

  • WPF: TreeViewItem bound to an ICommand

    - by Richard
    Hi All, I am busy creating my first MVVM application in WPF. Basically the problem I am having is that I have a TreeView (System.Windows.Controls.TreeView) which I have placed on my WPF Window, I have decide that I will bind to a ReadOnlyCollection of CommandViewModel items, and these items consist of a DisplayString, Tag and a RelayCommand. Now in the XAML, I have my TreeView and I have successfully bound my ReadOnlyCollection to this. I can view this and everything looks fine in the UI. The issue now is that I need to bind the RelayCommand to the Command of the TreeViewItem, however from what I can see the TreeViewItem doesn't have a Command. Does this force me to do it in the IsSelected property or even in the Code behind TreeView_SelectedItemChanged method or is there a way to do this magically in WPF? This is the code I have: <TreeView BorderBrush="{x:Null}" HorizontalAlignment="Stretch" VerticalAlignment="Stretch"> <TreeView.Items> <TreeViewItem Header="New Commands" ItemsSource="{Binding Commands}" DisplayMemberPath="DisplayName" IsExpanded="True"> </TreeViewItem> </TreeView.Items> and ideally I would love to just go: <TreeView BorderBrush="{x:Null}" HorizontalAlignment="Stretch" VerticalAlignment="Stretch"> <TreeView.Items> <TreeViewItem Header="New Trade" ItemsSource="{Binding Commands}" DisplayMemberPath="DisplayName" IsExpanded="True" Command="{Binding Path=Command}"> </TreeViewItem> </TreeView.Items> Does someone have a solution that allows me to use the RelayCommand infrastructure I have. Thanks guys, much appreciated! Richard

    Read the article

  • Add an objective @property attribute in objective-c

    - by morticae
    Does anyone know of a way to add additional attribute types to the @property keyword without modifying the compiler? Or can anyone think of another way to genericize getter/setter creation? Basically, I have a lot of cases in a recent project where it's handy for objects to lazily instantiate their array properties. This is because we have "event" objects that can have a wide variety of collections as properties. Subclassing for particular events is undesirable because many properties are shared, and it would become a usability nightmare. For example, if I had an object with an array of songs, I'd write a getter like the following: - (NSMutableArray *)songs { if (!songs) { songs = [[NSMutableArray alloc] init]; } return songs; } Rather than writing dozens of these getters, it would be really nice to get the behavior via... @property (nonatomic, retain, lazyGetter) NSMutableArray *songs; Maybe some fancy tricks via #defines or something? Other ideas?

    Read the article

  • Visual Studio 2010 Beta start without debugging Console wont stay open

    - by CousinVinny
    I want to keep the console (output) window open to view the output of the project I am working on. I have enabled the start without debugging option and added the button to the debugging toolbar, but alas it fails to keep it open nicely like in visual studio 2008. I have to add cin.getline() etc etc etc to get it to stay open, but I don't want to type it. Any suggestions as to alter it Visual Studio 2010 to keep it open, or any debugging tricks to make it easier to view output for longer than a flash. Visual Studio used to have a "Press any key to continue prompt" I want it back...

    Read the article

  • Identify in a unit test if Jetbrains IntelliJ IDEA 8 or 9 is running

    - by Ran Biron
    I need to know, in a context of a unit test, if Jetbrains IntelliJ idea is the test initiator and if it is, which version is running (or at least if it's "9" or earlier). I don't mind doing dirty tricks (reflection, filesystem, environment...) but I do need this to work "out-of-the-box" (without each developer having to setup something special). I've tried some reflection but couldn't find a unique identifier I could latch onto. Any idea? Oh - the language is Java.

    Read the article

  • Optimizations employed by ORM's

    - by Kartoch
    I'm teaching JEE, especially JPA, Spring and Spring MVC. As I have not so much experience in large projects, it is difficult to know what to present to students about optimisation of ORM. At the present time, I present some classic optimisation tricks: prepared statements (most of ORM implicitely uses it by default) first and second-level caches "write first, optimize later" it is possible to switch off ORM and send SQL commands directly to the database for very frequent, specialized and costly requests Is there any other point the community see about other way to optimize ORM ? I'm especially interested by DAO patterns...

    Read the article

  • What are the dark corners of Vim your mom never told you about?

    - by Sasha
    There is a plethora of questions where people talk about common tricks, notably this one. However, I don't refer to commonly used shortcuts that a noob would find cool. I am talking about a seasoned unix user (be she/he a developer, admin, both, etc), who thinks (s)he knows something 99% of us never heard or dreamed about. Something that not only makes his/her work easier, but also is COOL and hackish. After all, vim resides in the most dark-corner-rich OS in the world, thus it should have intricacies that only a few privileged know about and want to share with us.

    Read the article

  • android: which view should I use for showing text and image?

    - by Yang
    My app shows a list of items, where each line is an item title with its image asides, the line reserves 70% of space for text and 30% for image. Imagine what iphone app store looks like. Which view/layout combo is recommended for this purpose? I googled and find this article: http://www.curious-creature.org/2009/02/22/android-layout-tricks-1/ Does this view sound good? <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="?android:attr/listPreferredItemHeight" android:padding="6dip"> <ImageView android:id="@+id/icon" android:layout_width="wrap_content" android:layout_height="fill_parent" android:layout_alignParentTop="true" android:layout_alignParentBottom="true" android:layout_marginRight="6dip" android:src="@drawable/icon" /> <TextView android:id="@+id/secondLine" android:layout_width="fill_parent" android:layout_height="26dip" android:layout_toRightOf="@id/icon" android:layout_alignParentBottom="true" android:layout_alignParentRight="true" android:singleLine="true" android:ellipsize="marquee" android:text="Simple application that shows how to use RelativeLayout" /> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_toRightOf="@id/icon" android:layout_alignParentRight="true" android:layout_alignParentTop="true" android:layout_above="@id/secondLine" android:layout_alignWithParentIfMissing="true" android:gravity="center_vertical" android:text="My Application" />

    Read the article

  • WPF assign Z-Order of owned windows without changing focus.

    - by Kamiikoneko
    Hi, Due to OpenGL airspace issues I have several windows that are owned by the main window but look and act like controls. I also have some data readout/sort windows that show real-time data and need to be normal floating windows, also owned by the main window so that they remain floating above the main window even while operations are performed in the main window. The issue: I open a data readout window (normal window) and am watching data change. Then I click on a text box to enter a value in one of the windows that acts as a control due to airspace issues, and it becomes activated, covering up my data readout window. This is bad because the airspace window is supposed to act like it is part of the main window. I tried some tricks with Activation and Deactivation, and it looks ok but then editing the airspace window at all is impossible because WPF only lets me edit the activated window. How can I ask that normal data readout window to please stay above all other windows owned by the main window, but still let other windows receive focus?

    Read the article

  • Debugging FLEX/AS3 memory leaks

    - by Scott Evernden
    I have a pretty big Flex & Papervision3D application that creates and destroys objects continually. It also loads and unloads SWF resource files too. While it's running the SWF slowly consumes memory til about 2GB when it croaks the player. Obviously I am pretty sure I let go of reference to instances I no longer want with expectation the GC will do its job. But I am having a heck of a time figuring out where the problem lies. I've tried using the profiler and its options for capturing memory snapshots, etc - but my problem remains evasive. I think there are known problems using debug Flash player also? But I get no joy using the release version either. How do you go about tracking down memory leak problems using FLEX/AS3 ? What are some strategies, tricks, or tools you have used to locate consumption

    Read the article

  • Resharper and ViEmu Keybindings ( and Visual Assist )

    - by Keith Nicholas
    With ViEmu you really need to unbind a lot of resharpers keybindings to make it work well. Does anyone have what they think is a good set of keybindings that work well for resharper when using ViEmu? What I'm doing at the moment using the Visual Studio bindings from Resharper. Toasting all the conflicting ones with ViEmu, and then just driving the rest through the menu modifiers ( Alt-R keyboard shortcut for the menu item ). I also do the same with Visual Assist shortcuts ( for C++ ) if anyones got any tips and tricks for ViEmu / Resharper or Visual Assist working together well I'd most apprciate it!

    Read the article

  • Actionscript/Flex - Is it possible to dynamically extend an object, modify functions, add functions

    - by RR
    I know this question might be frowned upon, but actionscript is a dynamic language similar to javascript and in javascript I can take an object from a library written by someone else and dynamically (at runtime) add/remove/modify functions, properties, prototypes etc. this is kind of like dynamically extending an object to make it work with the library it came with as well as another library. Is something like this possible in flex actionscript? I'm thinking it is only possible with classes that are declared 'dynamic' and definitely not possible with classes declared 'final'. What are your thoughts? Any ideas/tricks?

    Read the article

  • Modifying SQL Server Schema Collection

    - by Mevdiven
    SQL Server XML Schema Collection is an interesting concept and I find it very useful when designing dynamic data content. However as I work my way through implementing Schema Collections, I find it very difficult to maintain them. Schema Collection DDL allows only CREATE and ALTER/ADD nodes to existing schemes. CREATE XML SCHEMA COLLECTION [ <relational_schema>. ]sql_identifier AS 'XSD Content' ALTER XML SCHEMA COLLECTION [ <relational_schema>. ]sql_identifier ADD 'Schema Component' When you want to remove any node from a schema you have to issue following DDL's. If that schema collection assigned to a table column, you have to alter table to remove schema collection association from that column Drop the schema collection object Re-Create schema collection Alter table column to re-associate schema collection to that column. This is pain when it comes to 100+ of schemes in a collection. Also you have to re-create XML indexes all over again, if any. Any solutions, suggestions, tricks to make this schema collection object editing process easier?

    Read the article

  • What is your motivation?

    - by vava
    As software developers we all know that motivation matters. Without it we could just stare into the monitor all day long and do nothing. There are some tricks to get yourself motivated like talking to people or doing the fun part of the project, but they do not always work. In the mean time I started to notice that I am most productive when I could see the person who is appreciating my work. The user, who is using the software and enjoying it. Because if there's none, what's the point of writing this code? So I was wondering, what makes you be at your top, is it the users, your fellow coders or maybe the money you get? PS. I know there's quite a few questions about motivation but they all about overcoming current situation. What I want to hear is what makes you come to the office every day, what you enjoy the most in your job, what makes you want to write this code and do it as fast as you possible could.

    Read the article

  • jQuery prevent paste to iframe designmode from MS Word

    - by naugtur
    I've seen some questions on catching the paste event. This looks helpful. But I want to prevent paste on a designmode iframe from happening when the pasted content is not plaintext, but comes from MS Word or other WYSIWYG editor. What is experience on that? I suppose I should catch the event (bind to iframe or to its body?) and look for some specific tags in the clipboard. What content does Internet Explorer add every time? [edit] After doing more research I see there is no easy way to work with clipboard in non Internet Explorer browser except some Flash tricks. I don't want them. How can I detect paste in Firefox and others then?

    Read the article

  • Common SIMD techniques

    - by zxcat
    Hi! Where can I find information about common SIMD tricks? I have an instruction set and know, how to write non-tricky SIMD code, but I know, SIMD now is much more powerful. It can hold complex conditional branchless code. For example (ARMv6), the following sequence of instructions sets each byte of Rd equal to the unsigned minimum of the corresponding bytes of Ra and Rb: USUB8 Rd, Ra, Rb SEL Rd, Rb, Ra Links to tutorials / uncommon SIMD techniques are good too :) ARMv6 is the most interesting for me, but x86(SSE,...)/Neon(in ARMv7)/others are good too. Thank you.

    Read the article

  • *Client* scalability for large numbers of remote web service calls

    - by Yuriy
    Hey Guys, I was wondering if you could share best practices and common mistakes when it comes to making large numbers of time-sensitive web service calls. In my case, I have a SOAP and an XML-RPC based web service to which I'm constantly making calls. I predict that this will soon become an issue as the number of calls per second will grow. On a higher level, I was thinking of batching those calls and submitting those to the web services every 100 ms. Could you share what else works? On a lower level side of the things, I use Apache Xml-Rpc client and standard javax.xml.soap.* packages for my client implementations. Are you aware of any client scalability related tricks/tips/warnings with these packages? Thanks in advance Yuriy

    Read the article

  • How do you use pip, virtual_env and Fabric to handle deployement?

    - by e-satis
    What are your settings, your tricks, and above all, your work flow? These tools are great but they are still no best practices attached to their usage, so I don't know what is the most efficient way to use them. Do you use pip bundles or always download? Do you set up Apache/Cherokee/MySQL by hand or do you have a script for than. Do you put everything in virtual_env and use --no-site-package? Do you use one virtual_env for several projects? What do you use Fabric for (which part of your deployment do you script)? Do you put your Fabric scripts in on the client or the server? How do you handle database and media file migration? Do you even need a build tool such as SCons? What are the steps of your deployment? How often do you perform each of them? etc.

    Read the article

  • Keyboard for programmers

    - by Robert Höglund
    I'm trying to improve my working environment and I'm still searching for that perfect keyboard that practically types bug-free code all by itself. At the moment I'm using a Logitech Wave for my Windows need and an Apple Wireless Keyboard (the one without a numeric keypad) when doing OS X stuff. I'm quite happy with the Logitech Wave but I would prefer one without all the extra multimedia buttons. What I like most about the Apple Wireless Keyboard is that it is very similar to the Macbook's keyboard which for me makes it easier to write code when on my Macbook. What kind of keyboard would you recommend for going all out writing code until your fingers bleed? I have remapped the Caps Lock key to Ctrl which after a while feels really good, until I have to sit at another computer or when someone at work is going to show me something on my computer. Are there other little keyboard tricks that you use to get a little bit more productive? I have looked into switching to Dvorak but I have decided it's not for me.

    Read the article

  • Why not allow mutation of the this binding?

    - by gnucom
    Hi Everyone, I'm building a interpreter/compiler for a school project (well now its turning into a hobby project) and an instructor warned me not to allow mutation of the 'this' binding (he said it was gross and made a huge deal about it) but I never learned why this is so... dangerous or bad. I'm very curious about why this is so bad. I figured this sort of feature could be useful in some way or another. I'm wondering if anyone familiar with building languages can tell me what sort of problems mutation on the 'this' binding can cause, and if they know of any cool or useful tricks that one could do if it actually was allowed. Do any languages that you're aware of allow mutation of 'this'? Thanks,

    Read the article

  • What are some methods to debug Javascript inside of a UIWebView?

    - by bpapa
    I'm trying to figure out why something with Javascript isn't working inside of a UIWebView. To my knowledge, there is no way to set a breakpoint inside of XCode for a js file. No problemo, I'll just go back to 2004 and use alert statemen-- oh wait they don't seem to work inside of a UIWebView either! The only thing I could think of is by exporting my HTML And JS files to my desktop and then just doing my debugging inside of Safari. And that works! But of course, the bug I'm fighting with in the UIWebView doesn't occur in Safari. Are there any other ways for debugging inside of a UIWebView, or any tricks that I can use akin to using the old-school alert method?

    Read the article

  • structured vs. unstructured data in db

    - by Igor
    the question is one of design. i'm gathering a big chunk of performance data with lots of key-value pairs. pretty much everything in /proc/cpuinfo, /proc/meminfo/, /proc/loadavg, plus a bunch of other stuff, from several hundred hosts. right now, i just need to display the latest chunk of data in my UI. i will probably end up doing some analysis of the data gathered to figure out performance problems down the road, but this is a new application so i'm not sure what exactly i'm looking for performance-wise just yet. i could structure the data in the db -- have a column for each key i'm gathering. the table would end up being O(100) columns wide, it would be a pain to put into the db, i would have to add new columns if i start gathering a new stat. but it would be easy to sort/analyze the data just using SQL. or i could just dump my unstructured data blob into the table. maybe three columns -- host id, timestamp, and a serialized version of my array, probably using JSON in a TEXT field. which should I do? am i going to be sorry if i go with the unstructured approach? when doing analysis, should i just convert the fields i'm interested in and create a new, more structured table? what are the trade-offs i'm missing here?

    Read the article

  • Which of these is pythonic? and Pythonic vs. Speed

    - by Kashyap Nadig
    Hi! I'm new to python and just wrote this module level function: def _interval(patt): """ Converts a string pattern of the form '1y 42d 14h56m' to a timedelta object. y - years (365 days), M - months (30 days), w - weeks, d - days, h - hours, m - minutes, s - seconds""" m = _re.findall(r'([+-]?\d*(?:\.\d+)?)([yMwdhms])', patt) args = {'weeks': 0.0, 'days': 0.0, 'hours': 0.0, 'minutes': 0.0, 'seconds': 0.0} for (n,q) in m: if q=='y': args['days'] += float(n)*365 elif q=='M': args['days'] += float(n)*30 elif q=='w': args['weeks'] += float(n) elif q=='d': args['days'] += float(n) elif q=='h': args['hours'] += float(n) elif q=='m': args['minutes'] += float(n) elif q=='s': args['seconds'] += float(n) return _dt.timedelta(**args) My issue is with the for loop here i.e the long if elif block, and was wondering if there is a more pythonic way of doing it. So I re-wrote the function as: def _interval2(patt): m = _re.findall(r'([+-]?\d*(?:\.\d+)?)([yMwdhms])', patt) args = {'weeks': 0.0, 'days': 0.0, 'hours': 0.0, 'minutes': 0.0, 'seconds': 0.0} argsmap = {'y': ('days', lambda x: float(x)*365), 'M': ('days', lambda x: float(x)*30), 'w': ('weeks', lambda x: float(x)), 'd': ('days', lambda x: float(x)), 'h': ('hours', lambda x: float(x)), 'm': ('minutes', lambda x: float(x)), 's': ('seconds', lambda x: float(x))} for (n,q) in m: args[argsmap[q][0]] += argsmap[q][1](n) return _dt.timedelta(**args) I tested the execution times of both the codes using timeit module and found that the second one took about 5-6 seconds longer (for the default number of repeats). So my question is: 1. Which code is considered more pythonic? 2. Is there still a more pythonic was of writing this function? 3. What about the trade-offs between pythonicity and other aspects (like speed in this case) of programming? p.s. I kinda have an OCD for elegant code. EDITED _interval2 after seeing this answer: argsmap = {'y': ('days', 365), 'M': ('days', 30), 'w': ('weeks', 1), 'd': ('days', 1), 'h': ('hours', 1), 'm': ('minutes', 1), 's': ('seconds', 1)} for (n,q) in m: args[argsmap[q][0]] += float(n)*argsmap[q][1]

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >