Search Results

Search found 3167 results on 127 pages for 'wish'.

Page 85/127 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • vagrant and puppet security for ssl certificates

    - by Sirex
    I'm pretty new to vagrant, would someone who knows more about it (and puppet) be able to explain how vagrant deals with the ssl certs needed when making vagrant testing machines that are processing the same node definition as the real production machines ? I run puppet in master / client mode, and I wish to spin up a vagrant version of my puppet production nodes, primarily to test new puppet code against. If my production machine is, say, sql.domain.com I spin up a vagrant machine of, say, sql.vagrant.domain.com. In the vagrant file I then use the puppet_server provisioner, and give a puppet.puppet_node entry of “sql.domain.com” to it gets the same puppet node definition. On the puppet server I use a regex of something like /*.sql.domain.com/ on that node entry so that both the vagrant machine and the real one get that node entry on the puppet server. Finally, I enable auto-signing for *.vagrant.domain.com in puppet's autosign.conf, so the vagrant machine gets signed. So far, so good... However: If one machine on my network gets rooted, say, unimportant.domain.com, what's to stop the attacker changing the hostname on that machine to sql.vagrant.domain.com, deleting the old puppet ssl cert off of it and then re-run puppet with a given node name of sql.domain.com ? The new ssl cert would be autosigned by puppet, match the node name regex, and then this hacked node would get all the juicy information intended for the sql machine ?! One solution I can think of is to avoid autosigning, and put the known puppet ssl cert for the real production machine into the vagrant shared directory, and then have a vagrant ssh job move it into place. The downside of this is I end up with all my ssl certs for each production machine sitting in one git repo (my vagrant repo) and thereby on each developer's machine – which may or may not be an issue, but it dosen't sound like the right way of doing this. tl;dr: How do other people deal with vagrant & puppet ssl certificates for development or testing clones of production machines ?

    Read the article

  • What breaks in a Windows domain if a member has a high time skew?

    - by Ryan Ries
    It's taken for granted by most IT people that in a Windows domain, if a member server's clock is off by more than 5 minutes (or however many minutes you've configured it for) from that of its domain controller - logons and authentications will fail. But that is not necessarily true. At least not for all authentication processes on all versions of Windows. For instance, I can set my time on my Windows 7 client to be skewed all to heck - logoff/logon still works fine. What happens is that my client sends an AS_REQ (with his time stamp) to the domain controller, and the DC responds with KRB_AP_ERR_SKEW. But the magic is that when the DC responds with the aforementioned Kerberos error, the DC also includes his time stamp, which the client in turn uses to adjust his own time and resubmits the AS_REQ, which is then approved. This behavior is not considered a security threat because encryption and secrets are still being used in the communication. This is also not just a Microsoft thing. RFC 4430 describes this behavior. So my question is does anyone know when this changed? And why is it that other things fail? For instance, Office Communicator kicks me off if my clock starts drifting too far out. I really wish to have more detail on this. edit: Here's the bit from RFC 4430 that I'm talking about: If the server clock and the client clock are off by more than the policy-determined clock skew limit (usually 5 minutes), the server MUST return a KRB_AP_ERR_SKEW. The optional client's time in the KRB-ERROR SHOULD be filled out. If the server protects the error by adding the Cksum field and returning the correct client's time, the client SHOULD compute the difference (in seconds) between the two clocks based upon the client and server time contained in the KRB-ERROR message. The client SHOULD store this clock difference and use it to adjust its clock in subsequent messages. If the error is not protected, the client MUST NOT use the difference to adjust subsequent messages, because doing so would allow an attacker to construct authenticators that can be used to mount replay attacks.

    Read the article

  • Webcam becomes "Unknown Device" after Windows Messenger 2011 is installed

    - by Boris
    I have Sony VAIO VGN-NS290J laptop. I installed Windows 7 Ultimate 64-bit. I was able to find drivers for all hardware without any problems. Recently, I installed Microsoft Windows Live Essentials 2011, i.e. Windows Live Messenger 2011. Ever since that application is running on my computer, my webcam is not recognized by the OS any more. It is listed as the "Unknown Device" and placed in the Universal Serial Bus controllers group in the Device Manager. There don't seem to be any drivers for this webcam. It's a standard Sony Motion Eye web camera and Sony does not offer any drivers for it. There is one application to download that utilizes the camera, but there are no drivers (and the system is showing the same behavior regardless of the presence of the application). It happens from time to time that the webcam becomes recognized by the OS again, after a couple of restarts; but not always. Then it becomes unknown again. I am absolutely positive that this issue is caused by the Windows Live Messenger 2011, because same symptoms caused the same effects before. I wish to be able to continue to use this software, but also to use my webcam. I was wondering if anyone had a similar issue and if there is a way to fix it. Thanks for all the help, I appreciate it. Update: I have discovered a pattern - if the camera goes astray, restarting the machine does not bring it back; but switching the computer off and turning it back on does. Every time! This is getting super complicated :)

    Read the article

  • samba sync password with unix password on debian wheezy

    - by Oz123
    I installed samba on my server and I am trying to write a script to spare me the two steps to add user, e.g.: adduser username smbpasswd -a username My smb.conf states: # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. unix password sync = yes Further reading brought me to pdbedit man page which states: -a This option is used to add a user into the database. This com- mand needs a user name specified with the -u switch. When adding a new user, pdbedit will also ask for the password to be used. Example: pdbedit -a -u sorce new password: retype new password Note pdbedit does not call the unix password syncronisation script if unix password sync has been set. It only updates the data in the Samba user database. If you wish to add a user and synchronise the password that im- mediately, use smbpasswd’s -a option. So... now I decided to try adding a user with smbpasswd: 1st try, unix user still does not exist: root@raspberrypi:/home/pi# smbpasswd -a newuser New SMB password: Retype new SMB password: Failed to add entry for user newuser. 2nd try, unix user exists: root@raspberrypi:/home/pi# useradd mag root@raspberrypi:/home/pi# smbpasswd -a mag New SMB password: Retype new SMB password: Added user mag. # switch to user pi, and try to switch to mag root@raspberrypi:/home/pi# su pi pi@raspberrypi ~ $ su mag Password: su: Authentication failure So, now I am asking myself: how do I make samba passwords sync with unix passwords? where are samba passwords stored? Can someone help enlighten me?

    Read the article

  • I need help choosing between two configurations of the Dell Studio 14

    - by Adnan
    There are two configurations of the Dell Studio 14 (1458) which I'm looking at: Config 1: Core i7-720QM @ 1.6 GHz; ATI Mobility Radeon HD 5450 1GB; 4gb DDR3 RAM @ 1066 MHz; 500 GB SATA HDD @ 7200 RPM; Price: $999 Config 2: Core i5-430M; ATI Mobility Radeon HD 4530 512MB; 4GB DDR3 RAM @ 1066 MHz; 500 GV SATA HDD @ 7200 RPM; Price: $874 What I want to know is, would config 1 still be able to do decent gaming (maybe some Starcraft II), and is there a great performance difference between the i5 and i7 processors? Is the $130 extra worth it for the i7 and better graphics card? I do more than just basic computing. I plan on getting into web design (specifically using Photoshop and Dreamweaver), and I wish to do gaming. I know Conifg 1 is the better value, but I want to be sure that the $130 more is truly worth it. I dont have too much money and want to spend wisely as possible, yet I am a computer geek and plan on doing a lot more than the average user.

    Read the article

  • PGB Multipath & return routes

    - by Dennis van der Stelt
    I'm probably a complete n00b concerning serverfault related questions, but our IT department makes a bold statement I wish to verify. I've searched the internet, but can find nothing related to my question, so I come here. We have Threat Management Gateway 2010 and we used to just route the request to IIS and it contained the ip address so we could see where it was coming from. But now they turned on "Requests apear to come the TMG server" so ip addresses aren't forwarded anymore. Every request has the ip of the TMG server. Now the idea behind this is that because of multipath bgp routes, the incoming request goes over RouteA, but the acknowledgement messages could return over RouteB. The claim is that because the request doesn't come from the first known source, our proxy, but instead from IIS, some smart routers at the visitor of our websites don't recognize the acknowledgement message and filter it out. In other words, the response never arrives. Again, this is the claim. But I cannot find ANY resources on the internet that support this claim. I do read about pgb multipath, but more in the case that there are alternative routes when the fastest route fails for some reason. So is the claim completely bogus or is there (some) truth to it? Can someone explain or point me to resources? Thanks in advance!

    Read the article

  • Setting SVN permissions with Dav SVN Authz

    - by Ken
    There seems to be a path inheritance issue which is boggling me over access restrictions. For instance, if I grant rw access one group/user, and wish to restrict it some /../../secret to none, it promptly spits in my face. Here is an example of what I'm trying to achieve in dav_svn.authz [groups] grp_W = a, b, c, g grp_X = a, d, f, e grp_Y = a, e, [/] * = @grp_Y = rw [somerepo1:/projectPot] @grp_W = rw [somerepo2:/projectKettle] @grp_X = rw What is expected: grp_Y has rw access to all repositories, while grp_W and grp_X only have access to their respective repositories. What occurs: grp_Y has access to all repositories, while grp_W and grp_X have access to nothing If I flip the access ordering where I give everyone access and restrict it in each repository, it promply ignores the invalidation rule (stripping of rights) and gives everyone the access granted at the root level. Forgoing groups, it performs the same with user specific provisions; even fully defined such as: [/] a = rw b = c = d = e = f = g = rw [somerepo1:/projectPot] a = rw b = rw c = rw d = e = rw f = g = rw [somerepo2:/projectKettle] a = rw b c d = rw e = rw f = rw g Which yields the exact same result. According to the documentation I'm following all protocols so this is insane. Running on Apache2 with dav_svn

    Read the article

  • Liferay - Verify each node in a cluster

    - by Schrute
    In this example, I have two clustered instances of Liferay using bundled Tomcat running, using cluster link and shared documents. Let's say the name of the public community is fubar and friendy URL used is fubar.lipsum.com. Let's say the ports listening on each server is 8080. If I go to both server1:8080 or server2:8080 I will get the default page for Liferay. How can I test fubar.lipsum.com on each node by using the backend server, so I can verify each server? If I test it, it just goes to the load balancer, I wish there was a way to append to the backend connection to bring it up. I can add the friendly URL to my local machines hosts file and this seems to kinda work, but then once something is called in the application, it tries to go out again from the backend server and then uses SSL and then we have problems. I think I may be able to do port forwarding, but this seems like a basic thing we should be able to do and what I've found so far in the admin docs has not helped. Using the option to print the server name in the page details isn't an option either.

    Read the article

  • Looking for recommendations on OCR problem - tabular numeric data

    - by ldigas
    I have 20 pages of experiment measurement data which I need to digitalize. The results are in tabular form, scanned in 600 dpi resolution, and as far as scans go, they came up pretty clean and readable. For an example of how it looks see here (but beware: it is a rather big scan; about 5Mb; no problem for any broadband connection, but dialups should approach with caution!) ... and I need it finished by sunday afternoon (:-o) <-- smiley in a state of panic (then why did't you start sooner?)... yea, yeah ... I know ... but, it came up late, and I wasn't thinking I was gonna need this data also. So, I'm looking for recommendations. I haven't much experience with OCR programs, save scanning a page or two of pure text, but just to mention, I haven't the wish also to test out every OCR program out there. So this isn't a "name your OCR favourite". What I'm looking is advice from someone who's done something like that, and his/hers experience on what would be the best way to undertake. I need the data in txt form but since it will have to be checked (by drawing it, and just simply watching whether some points "jump out") I'll probably be entering it in Excel at first.

    Read the article

  • How to backup a NAS drive to a USB drive?

    - by Tim Murphy
    How would you backup 600+ GB of data on a NAS (Network-Attached Storage) drive to a USB external drive? The NAS drive does not contain mission critical data nonetheless I wish to make weekly copies of it just in case. The NAS drive is almost exclusively used as an archive dump and is rarely updated. However the backup strategy used must have a simple restore procedure so I can confidently say the data now on the NAS drive is exactly how it was at the time of backup. I did try xcopy but seemed like it would take many-many hours and eventually crashed with insufficient memory. http://www.ctunion.com/node/114 suggests I would need to use xxcopy instead due to folder/file name lengths. My concern with xcopy/xxcopy is the length of time it takes. Hoping something else is faster. NAS drive is DLink DNS-313. 1TB drive installed. Connected to router via Ethernet cable. USB drive is Seagate 1TB. Can be connected to Windows Vista (preferred) or Windows 7 PCs. Both PCs are usually connected Wirelessly however ethernet cable can be used during backup to speed up the process.

    Read the article

  • download management

    - by Jonathan
    I download many files, usually 2 or 3 a day, often 10ish. Some of them are duplicates because I just can't be bothered to find the original in my downloads folder. I have previously tried DAP and used that to create a new subfolder for each day's download. yet I have found this insufficient as sometimes I wish to find files by name/file type or I have multiple parts of downloads over more than one day. Another problem I have found is zips/rars/etc after downloading them and extracting them I then have the zip and the folder. I like it like on a Mac where it automatically extracts the zip after it has been downloaded and removes the zip. What I'd like to be able to do is sort the downloads by date, but dynamically so they are just in the big downloads folder, but I can just press a button and it will show me all the files from a particular site, or from a particular day or by a certain file type. Is there any software that will do this? I use Chrome as a browser but also have Firefox and like that. Jonathan

    Read the article

  • why sendmail resolves to ISP domain?

    - by digital illusion
    I wish to setup a local mail server for debugging purposes using fedora 15 I set up sendmail, but there is a problem. When I'm not connected to the internet, the local mail server delivers correctly (to localhost). And in /var/log/mail I see that I correctly delivered a mail to [email protected]: Jun 21 18:24:56 PowersourceII sendmail[6019]: p5LGOttt006019: [email protected], size=328, class=0, nrcpts=1, msgid=<[email protected]>, relay=adriano@localhost Jun 21 18:24:56 PowersourceII sendmail[6020]: p5LGOuSV006020: from=<[email protected]>, size=506, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=PowersourceII.localdomain [127.0.0.1] Jun 21 18:24:56 PowersourceII sendmail[6019]: p5LGOttt006019: [email protected], [email protected] (500/500), delay=00:00:01, xdelay=00:00:00, mailer=relay, pri=30328, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (p5LGOuSV006020 Message accepted for delivery) When I connect, networkmanager fills in /etc/resolv.conf with: domain fastwebnet.it search fastwebnet.it localdomain nameserver 62.101.93.101 nameserver 83.103.25.250 Now sendmail does not work any longer and tries to send messages to my ISP domain, as seen in the log: Jun 21 18:40:02 PowersourceII sendmail[6348]: p5LGe1LV006348: [email protected], [email protected] (500/500), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=30327, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (p5LGe10n006352 Message accepted for delivery) Jun 21 18:40:02 PowersourceII sendmail[6354]: p5LGe10n006352: to=<[email protected]>, delay=00:00:01, xdelay=00:00:00, mailer=esmtp, pri=120651, relay=mx3.fastwebnet.it. [85.18.95.21], dsn=5.1.1, stat=User unknown As you can see, it tries to deliver a mail to [email protected], and fails The setup is working under other ISPs. How can I avoid the fastweb ISP DNS relay? Thank you

    Read the article

  • Shared printer hosted by Windows 7 to XP peers [closed]

    - by Alistair Knock
    Possible Duplicate: Add Network Printer drivers in Windows 7/Server 2008 R2? A Canon Pixma ip4600 installed all by itself when connected to a Windows 7-64 bit machine. I then updated it with the add-on Canon provide to give additional functionality. I then wish to share it with a box which is running Windows XP 32-bit. The XP box can see the printer but can't find a driver from the 7 machine, which is fine. I ask the 7 machine to get the x86 drivers, but it can't. I install the 32-bit XP drivers on the XP machine, but unlike previous Canon drivers (which unzip to give an .inf file), they assume a local printer and partially give up. I find the .inf file in the Program files\CanonBJ\... directory. Neither the XP machine, nor the 7 machine when the CanonBJ directory is shared to it, is happy with the .inf file. I attempt to install the 32-bit drivers on the 64-bit 7 machine, which, understandably, fail. Where do we go from here? (I apologise for posting in the first-person, I'm not sure why this was)

    Read the article

  • Oracle with Kerberos authentication and Windows 2003 Server as KDC

    - by Supaplex
    Hello everyone. I am running Oracle 10.2 on a Windows 2003 Server SP2 which is also the domain controller on the network. I wish to switch authentication method from NTS to Kerberos. I have spent a lot of time trying to configure Oracle with Kerberos authentication from the Oracle Advanced Security option from the Net Manager utility. I have disabled NTS so Kerberos is promoted as the preferred authentication method. But as soon as the configuration is saved from Net Manager and I restart the Oracle server service, Oracle will not start. I don't know what Oracle is complaining about, because I don't know where to look for the Oracle error log. My first question is: how can I figure out what's bugging Oracle? My second question: is there a good tutorial for setting up Oracle on a Windows 2003 with Kerberos Authentication, where the Windows 2003 Server is the KDC? Maybe there is a book I can get? I have read Oracles own guide, but it is mostly for Linux/Unix. Thanks a lot!

    Read the article

  • What is the quickest reliable way to backup a NAS drive to a USB drive?

    - by Tim Murphy
    How would you backup 600+ GB of data on a NAS (Network-Attached Storage) drive to a USB external drive? The NAS drive does not contain mission critical data nonetheless I wish to make weekly copies of it just in case. The NAS drive is almost exclusively used as an archive dump and is rarely updated. However the backup strategy used must have a simple restore procedure so I can confidently say the data now on the NAS drive is exactly how it was at the time of backup. I did try xcopy but seemed like it would take many-many hours and eventually crashed with insufficient memory. http://www.ctunion.com/node/114 suggests I would need to use xxcopy instead due to folder/file name lengths. My concern with xcopy/xxcopy is the length of time it takes. Hoping something else is faster. NAS drive is DLink DNS-313. 1TB drive installed. Connected to router via Ethernet cable. USB drive is Seagate 1TB. Can be connected to Windows Vista (preferred) or Windows 7 PCs. Both PCs are usually connected Wirelessly however ethernet cable can be used during backup to speed up the process.

    Read the article

  • Change OpenVZ route to pass through ip failover

    - by Kevin Campion
    I have one dedicaced server with its own IP and another IP (failover) who refer to the first. I will wish to change the gateway of a Proxmox virtual machine (openvz) who runs on this dedicaced server to go through the failover IP rather than the ip of host main server. Once connected to a virtual machine, when I do a traceroute VE# traceroute www.google.fr traceroute to www.google.fr (209.85.229.104), 30 hops max, 60 byte packets 1 MY_SERVER_NAME.ovh.net (xxx.xxx.xxx.xxx FIRST_IP_MAIN_SERVER) 0.021 ms 0.010 ms 0.009 ms The first line tells me the ip of host main server. I would like that the traceroute display the second IP failover. VE# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 * 255.255.255.255 UH 0 0 0 venet0 default 192.0.2.1 0.0.0.0 UG 0 0 0 venet0 With iptables HOST# iptables -t nat -L Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- anywhere anywhere MASQUERADE all -- anywhere anywhere SNAT tcp -- anywhere 10.10.101.2 tcp dpt:www state NEW,RELATED,ESTABLISHED,UNTRACKED to:SECOND_IP_FAILOVER SNAT all -- 10.10.101.2 anywhere to:SECOND_IP_FAILOVER 10.10.101.2 is the virtual machine IP (interface venet0) Any ideas ?

    Read the article

  • Fully FOSS EMail solution

    - by Ravi
    I am looking at various FOSS options to build a robust EMail solution for a government funded university. Commercial options are to be chosen only in the worst case scenario. Here are the requirements: Approx 1000-1500 users - Postfix or Exim? (Sendmail is out;-)) Mailing lists for different groups/Need web based archive - Mailman? Sympa? Centralised identity store - OpenLDAP? Fedora 389DS? Secure IMAP only - no POP3 required - Courier? Dovecot? Cyrus?? Anti Spam - SpamAssasin? what else? Calendaring - ?? webmail - good to have, not mandatory - needs to be very secure...so squirrelmail is out;-)? Other questions: What mailbox storage format to use? where to store? database/file system? Simple and effective HA options? Is there a web proxy equivalent to squid in the mail server world? software load balancers?CARP? Monitoring and alert? Backup? The govt wants to stimulate the local economy by buying hardware locally from whitebox vendors. Also local consultants and university students will do the integration. We looked at out-of-the-box integrated solutions like Axigen, Zimbra and GMail but each was ruled out in favour of a DIY approach in the hopes of full control over the data and avoiding vendor lockin - which i though was a smart thing to do. I wish more provincial governments in the developing world think of these sort of initiatives As for OS - Debian, FreeBSD would be first preference. Commercial OS's need not apply. CentOS as second tier option...

    Read the article

  • Workstations cannot see new MS Server 2008 domain, but can access DHCP. (solved)

    - by Radix
    The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

    Read the article

  • Using mod_rewrite to mask /cgi-bin/abc as /def

    - by Alois Mahdal
    I have a seemingly easy task, but somehow I just can't get it to work: Some interesting lines from my httpd.conf: ... DocumentRoot "D:/opt/apache/htdocs" ... ScriptAlias /cgi-bin/ "D:/opt/apache/cgi-bin/" ... <Directory "D:/opt/apache/htdocs"> Options Indexes FollowSymLinks ExecCGI AllowOverride None Order allow,deny Allow from all </Directory> <Directory "D:/opt/apache/cgi-bin/"> AllowOverride None Options ExecCGI Order allow,deny Allow from all </Directory> (I know it's dumb but it's only a testing machine :D.) Now, I have d:\opt\apache\cgi-bin\expired.pl and I expect GET /licensecheck.php?code=123456. And I wish to fake client into thinking it speaks with /licensecheck.php, but actually return data by \expired.pl. What I tried was setting following at the end of http.conf: RewriteEngine on RewriteRule ^/licensecheck.php$ /cgi-bin/expired.pl [T=application/x-httpd-cgi,L] ...but it keeps 404-ing me, looking for cgi-bin directory (not cgi-bin\expired.pl) in my DocumentRoot! [error] [client 127.0.0.1] script not found or unable to stat: D:/opt/apache/htdocs/cgi-bin /cgi-bin/expired.pl and all other scripts in /cgi-bin/ work as expected, Only way I could make it work was actually putting the \expired.pl to DocumentRoot, but I don't want this, I want my cgi-bin neatly separated :)

    Read the article

  • Setting kernel memory for installing postgresql

    - by Matthieu Taymans
    My question is about setting the kernel shared memory for installing postgresql on mac osx 10.6.8. In the readme file of postgresql it is said: Shared Memory PostgreSQL uses shared memory extensively for caching and inter-process communication. Unfortunately, the default configuration of Mac OS X does not allow suitable amounts of shared memory to be created to run the database server. Before running the installation, please ensure that your system is configured to allow the use of larger amounts of shared memory. Note that this does not 'reserve' any memory so it is safe to configure much higher values than you might initially need. You can do this by editting the file /etc/sysctl.conf - e.g. % sudo vi /etc/sysctl.conf On a MacBook Pro with 2GB of RAM, the author's sysctl.conf contains: kern.sysv.shmmax=1610612736 kern.sysv.shmall=393216 kern.sysv.shmmin=1 kern.sysv.shmmni=32 kern.sysv.shmseg=8 kern.maxprocperuid=512 kern.maxproc=2048 Note that (kern.sysv.shmall * 4096) should be greater than or equal to kern.sysv.shmmax. kern.sysv.shmmax must also be a multiple of 4096. Once you have edited (or created) the file, reboot before continuing with the installation. If you wish to check the settings currently being used by the kernel, you can use the sysctl utility: % sysctl -a The database server can now be installed. I'm a real beginner with all this but need to instal postgresql for academic purposes do you know how i can set this kernel shared memory. Won't that be harmful for my system? Thank you in advance. Matthieu

    Read the article

  • Exchange 2010 DAG + VMWare HA = no support?

    - by Dan
    We currently have an Exchange 2003 clustered environment (two machine cluster) that we're looking to upgrade to 2010. We recently purchased a VMWare virtualization environment (three Dell R710's with an EMC NS-120 serving up NFS datastores - iSCSI is available) that we wish to use for this new environment. I'm seeing that Microsoft does not support Exchange 2010 DAGs with a virtualization high availability solution (see links below). I would like to utilize the DAG to ensure the data stays available if one host goes down, and HA to ensure that if the physical host goes down, the VM will come back up on the other available host. Does anybody know why MS does not support this? VMWare HA will only restart the VM if it is hung/down - I don't see any difference between this and restarting the physical box if someone pulled the power... Will we only run into issues with support if it has something to do with HA/DAG failover or will they see we have HA and tell us to put it on a physical box even if it has nothing to do with HA? If we disable HA for these VM's will that satisfy them on a support case? Has anybody set up an Exchange 2010 DAG on VMware with HA enabled? Will they have any issues with using an NFS datastore? We have much greater flexibility on the EMC with NFS vs iSCSI, so I would prefer to continue utilizing that. Thanks for any input! http://www.vmwareinfo.com/2010/01/verifying-microsoft-exchange-2010.html Take a look at the second image under "Not Supported" http://technet.microsoft.com/en-us/library/aa996719.aspx "Microsoft doesn't support combining Exchange high availability solutions (database availability groups (DAGs)) with hypervisor-based clustering, high availability, or migration solutions. DAGs are supported in hardware virtualization environments provided that the virtualization environment doesn't employ clustered root servers."

    Read the article

  • Using Varnish (only) for DDoS mitigation

    - by Martin Kanters
    My VPS is suffering from a (D)DoS doing a SYN flood with spoofed IPs. I'm right now searching from ways how to be able to defend (at least a bit) against it. It's running a DirectAdmin apache2 webserver. Mainly used for serving PHP and MySQL. We are using CloudFlare, which are saying that they are able to mitigate (D)DoS at some level, now the attacker knows our real IP address, so CloudFlare isn't helping a bit. I've done some searching on the net and found out about enabling SYN cookies, to defend against it. I've checked my settings and it seems it was enabled all along. I've also read about that Varnish is able to defend against SYN flooding and Slowloris attacks, now I'm pretty interested in using that. The thing is that CloudFlare is already caching a lot from us, and I don't wish to spend too much resources on Varnish. Is it possible and smart to set up Varnish only for the better handling of requests? Are there perhaps better ways which I've missed? Thanks in advance, Martin

    Read the article

  • libsasl2 change paths

    - by mk_89
    I have been following the tutorial https://help.ubuntu.com/community/Postfix for installing Postfix on ubuntu. Im stuck at the Authenication section of the tutorial where you change paths to live in the false root, if you look at the link above I have a file (/etc/default/saslauthd) which is pretty much the same as the one from the tutorial. saslauthd # This needs to be uncommented before saslauthd will be run automatically START=yes PWDIR="/var/spool/postfix/var/run/saslauthd" PARAMS="-m ${PWDIR}" PIDFILE="${PWDIR}/saslauthd.pid" # You must specify the authentication mechanisms you wish to use. # This defaults to "pam" for PAM support, but may also include # "shadow" or "sasldb", like this: # MECHANISMS="pam shadow" MECHANISMS="pam" # Other options (default: -c) # See the saslauthd man page for information about these options. # # Example for postfix users: "-c -m /var/spool/postfix/var/run/saslauthd" # Note: See /usr/share/doc/sasl2-bin/README.Debian #OPTIONS="-c" #make sure you set the options here otherwise it ignores params above and will not work OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd" When I run the following command in ubuntu dpkg-statoverride --force --update --add root sasl 755 /var/spool/postfix/var/run/saslauthd I get the following error dpkg-statoverride: warning: An override for '/var/spool/postfix/var/run/saslauthd' already exists, but --force specified so will be ignored. dpkg-statoverride: warning: --update given but /var/spool/postfix/var/run/saslauthd does not exist I don't why this is happening, I literally followed the tutorial step by step and have installed all the packages necessary, what could be the problem? do I have to manually create

    Read the article

  • What's next for all of these Microsoft "overlapping" and "enhanced" products ?

    - by indyvoyage
    Recently I attended a road show, organised by MS Gold Partner company in the UK. The products discussed were: SharePoint server (2010 and 2007), Exchange server, Office Communication Server 2007, Exchange hosted services Office Live meeting, Office Communicator, System Center Configuration Manager and Operation Manager, VMware, Windows 7 etc. As Microsoft claims the enhancement in the each product against higher version, I felt that clients are not much interested in all these details. For example Office Communicator, surely they have improved a lot the product and first site all said 'WOW' great product, but nobody wish to pay money for all these extra features. Some argued, they are bogged down by all these increased number of menus. They don't need soft call feature included with mobile call. It apply for all other products as well such as MS office (next what 2 ribbons ?), windows OS and many more. Indeed there must be good features in all these products, but is it worth to spend money and time to update the older system ? Also sometimes these feature will decrease the productivity instead increase it. *So do you think what ever enhancement MS is doing in the products is only for selling purpose, not a real use ?? and I think also keep the developer busy learning the new tools and features. * I am sure some some people here will argue that some people need this sort of features. But I am not talking about NASA or MI5 guys. I am talking of usual businesses and joe public. Any ideas welcome.

    Read the article

  • Migrating away from LVM

    - by Kye
    I have an Ubuntu home media server setup with 4.5TB split across a few hard-drives (1x3TB, 2x1TB) and I'm using LVM2 to manage the volumes. I have recently added a 60GB SSD to my server, and I wish to use it to house the 'root' partition of my server (which is currently under the LVM group). I don't want to simply add it to the LVM volume group, because (afaik) there's no way to ensure that the SSD will be used for the root filesystem. If I just throw it at the VG, it may be used to house my media, which would defeat the purpose of having the SSD in the first place. I feel that my only solution is to somehow remove my root partition from the LVM setup and copy it across to the SSD. My boot partition is, of course, not part of the LVM group. My disk setup is as follows: 60GB SSD: EMPTY. 1TB HDD: /boot, LVM space. 1TB HDD: LVM space. 3TB HHD: LVM space. I have a few logical volumes. my root (/), a 'media' volume for my media collection, a backup one for my network backups.etc. Does anyone have any advice as to how to go about this? My end goal is to have the 60GB SSD used for my boot and root partitions, with everything else on the 3TB/1TB/1TB hard-drives.

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >