Search Results

Search found 4907 results on 197 pages for 'xfce4 terminal'.

Page 85/197 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• Xorg server won't start after fresh install of Debian 5.04, screen goes blank (Intel Atom D510(Pinet

  - by Kamil Zadora

  Hello, I have installed Debian 5.04 Lenny on my new Intel D510MO motheboard. I fixed some issues with incorrect drive mapping (for some reason during installation my hdd was on sdb, after a restart it is under sda - fixed in grub), and now I am struggling with getting graphical enviroment up and running, I installed the graphical enviroment using the Debian installer. I am not an linux expert by any means, I assume that I need to edit the xorg.conf file. Any hints appreciated! UPDATE1: No change after dpkg-reconfigure xserver-xorg Here is my current xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "pl" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection UPDATE2: I have installed vnc4server package. I can connect over vnc from my windows 7 laptop and i see empty desktop with terminal window open. Seems that the xserver and gdm are running but they cant talk with my GPU. I am not sure if a can use any gui tool to configure it overthe vnc, as all I see is the terminal window, no taskbars etc. UPDATE3: My current Xorg.0.log http://pastebin.pl/18918 The graphic chipset integrated into the D510 processor is Intel 945GC

  Read the article

• Problems configuring an SSH tunnel to a Nexentastor appliance for use with headless Crashplan

  - by Rob Smallshire

  Problem I am attempting to configure an SSH tunnel to a NexentaStor appliance from either a Windows or Linux computer so that I can connect a Crashplan Desktop GUI to a headless Crashplan server running on the Nexenta box, according to these instructions on the Crashplan support site: Connect to a Headless CrashPlan Desktop. So far, I've failed to get a working SSH tunnel from from either either a Windows client (using Putty) or a Linux client (using command line SSH). I'm fairly sure the problem is at the receiving end with NexentaStor. A blog article - CrashPlan for Backup on Nexenta - indicates that it could be made to work only after "after enabling TCP forwarding in Nexenta in /etc/ssh/sshd_config" - although I'm not sure how to go about that or specifically what I need to do. Things I have tried Ensuring the Crashplan server on the Nexenta box is listening on port 4243 $ netstat -na | grep LISTEN | grep 42 127.0.0.1.4243 *.* 0 0 131072 0 LISTEN *.4242 *.* 0 0 65928 0 LISTEN Establishing a tunnel from a Linux host: $ ssh -L 4200:localhost:4243 admin:10.0.0.56 and then, from another terminal on the Linux host, using telnet to verify the tunnel: $ telnet localhost 4200 Trying ::1... Connected to localhost. Escape character is #^]'. with nothing more, although the Crashplan server should respond with something. From Windows, using PuTTY have followed the instructions on the Crashplan support site to establish an equivalent tunnel, but then telnet on Windows gives me no response at all and the Crashplan GUI can't connect either. The PuTTY log for the tunnelled connection shows reasonable output: ... 2011-11-18 21:09:57 Opened channel for session 2011-11-18 21:09:57 Local port 4200 forwarding to localhost:4243 2011-11-18 21:09:57 Allocated pty (ospeed 38400bps, ispeed 38400bps) 2011-11-18 21:09:57 Started a shell/command 2011-11-18 21:10:09 Opening forwarded connection to localhost:4243 but the telnet localhost 4200 command from Windows does nothing at all - it just waits with a blank terminal. On the NexentaStor server I've examined the /etc/ssh/sshd_config file and everything seems 'normal' - and I've commented out the ListenAddress entries to ensure that I'm listening on all interfaces. How can I establish a tunnel, and how can I verify that it is working?

  Read the article

• Replace text with spaces in MySQL

  - by javipas

  I'm trying to do a global replace of search in my database, which has a lot of articles with a double carriage return because of this code: <p> </p> I'd like to replace this in my WordPress blog so instead of that appears... nothing, and so I can delete the CR. I've tried this on my database UPDATE wp_posts set post_content = replace (post_content,'<p> </p>',''); but didn't work. Why? Do I have to add special thinks to consider the space between the <p>and the</p>? Mmm. Good points, both Jon Angliss and Wim. Jon, as you could have guessed, the database shows no entries with that text string. So there's something going on inside the post_content field. Wim, the famous   was replaced previously, but there are still hundreds of posts that for some reason have something different between the p and the /p tags. I've done a search of one of the posts with this error: mysql> select * from wp_posts where post_title like '%3DVisionLive%'; And looking in the wp_content field, this is a little piece of the post: Phil Eisler, responsable de la divisi?n 3D Vision.?</p> <p>?</p> <p>Este portal ser? por tanto No spanish tilde (accent) shown on the terminal, and instead of an space there's a quotation mark between the p and the /p tags. I've tried to replace <p>?</p>, but again, no results. There's some character (or several) there, but I don't know how to discover that. Maybe it's the character set of my terminal, but I've accessed the database from phpmyadmin and in that case there's a space character between the p and the /p. Weird.

  Read the article

• Ballooning Mac OS X kernel_task and Wired memory usage. How to diagnose / fix?

  - by user28930

  I have a very strange issue, which I'm having a hard time diagnosing as to the root cause. I have a Mac Pro (2008, 8-core 2.8 GHz, 8800GT) with 14 GB of RAM (recently upgraded because of this issue!). When I boot my system and log in, vm_stat / top / Activity Monitor will show that kernel_task has about 150 MB allocated, and the machine has about 800 MB of Wired memory being allocated. Even initially, 800 MB seems an awful lot of wired memory to be allocated with no applications running - but, it gets worse. (NB: Wired is locked, unswappable memory) After a very short time, sometimes triggered by something as simple as launching a terminal, kernel_task will balloon to 8-900 MB of Real Mem (RSIZE), and Wired Memory will accelerate to 1.6 GB (implying that all the extra memory requests are for wired RAM in the kernel). If I quit everything (I.E: no running applications, bar an activity monitor or terminal to view top), there is no appreciable reduction in either kernel_task RSIZE, or Wired Memory usage. Going the opposite way, and loading the system with tasks also shows that wired memory does not get reduced - and that importantly it is not reduced in preference to heavy swapping. If I log out and log back in again, it reduces a bit (450 MB kernel_task, 1.28 GB Wired), but not back to the start. I'm not running any wacky kexts - and futhermore, kextstat shows no huge memory allocations there; the largest being com.apple.nvidia.nv50hal at about 4 MB of Memory. The machine feels overall more sluggish when this has happened - unsurprisingly because such a huge amount of RAM has been marked as non-pageable. So I have a few questions: 1) Is there a good way to diagnose what has allocated all of this wired memory? It's often over 2 times the kernel_task size, running no applications. The real memory total doesn't seem to add up - it seems that there is a bunch of RAM that isn't being accounted for anywhere. 2) What is happening to cause the kernel to suddenly require 6 times as much memory?

  Read the article

• Installing MySQL on Ubuntu Natty with Shell Script

  - by Obi Hill

  I'm trying to install MySQL on Ubuntu Natty from a shell script. However, I keep running into one major issue: when I try to define the password outside of the shell script. Below is the code to my shell script (which I have saved in /etc/init.d/install_mysql: export DEBIAN_FRONTEND=noninteractive echo mysql-server-5.1 mysql-server/root_password password $dbpass | debconf-set-selections echo mysql-server-5.1 mysql-server/root_password_again password $dbpass | debconf-set-selections apt-get -y install mysql-server So what I enter in the terminal is: dbpass="mysqlpass" chmod +x /etc/init.d/install_mysql /etc/init.d/install_mysql MySQL installs, but it installs without a password, so I can just do something like mysql -uroot to access mysql (which I don't want). The funny thing is if I put the password in the shell script as regular text, it works ok. So if I my install script is as follows, everything works (i.e. I must specify a password to access mysql): export DEBIAN_FRONTEND=noninteractive echo mysql-server-5.1 mysql-server/root_password password mysqlpass | debconf-set-selections echo mysql-server-5.1 mysql-server/root_password_again password mysqlpass | debconf-set-selections apt-get -y install mysql-server Is there a way I can use a shell script variable to define my password in the shell script, instead of entering the password literally?! Thanks in advance. EDIT I've found the answer to this. The following is what I should have entered in the terminal: dbpass="mysqlpass" export dbpass chmod +x /etc/init.d/install_mysql /etc/init.d/install_mysql It works like a charm now.

  Read the article

• Cannot connect to server via SSH

  - by Rayne

  I'm running RHEL 6.0, and I accidentally moved the /bin, /boot, /cgroup, console.txt, /data, /dev, /etc to another folder. I think I managed to move these folders back, but now I'm having trouble connecting to the server using SSH, but am able to access the server via VNC. When I tried to connect to the server using a terminal from another server, I get the error ssh_exchange_identification: Connection closed by remote host I'm currently still connected via SSH to the server (haven't closed the window yet), and am still able to access it normally. But if I try to open a new SSH terminal from my current session, I see /bin/bash: Permission denied If I try to open a new SSH File Transfer window from my current session, I get the error File transfer server could not be started or it exited unexpectedly. Exit value 0 was returned. Most likely the sftp-server is not in the path of the user on the server-side I checked and I have Subsystem sftp /usr/libexec/openssh/sftp-server which is the same path as the output of locate sftp-server Also, when I tried to restart sshd, I get the error Couldn't open /dev/null: Permission denied But my /dev/null has the permissions crw-rw-rw- for root,root. How can I resolve this? ETA: Thanks for all your help! I was able to start ssh by running the application directly /usr/sbin/sshd Even though the status of the openssh-daemon is still "stopped".

  Read the article

• Ubuntu : apt-get command error

  - by Wibowo Margito

  I work with Ubuntu 10.04 everyday. Several days ago, when I release command sudo apt-get install .... it run very good, no error. I also able to open websites with my browser with no proxy. But, today, I got error. Every time I release the command, the connection redirected to an IP in my local network. I can see it in the terminal window. Several days ago I tried to connect to the internet throught the IP, by SSH tunneling. But I forget what I have done and there is no way home. This is the output in terminal : deo@deo-laptop:~$ sudo apt-get update [sudo] password for deo: Err http://cx.archive.ubuntu.com lucid Release.gpg [ Could not connect to 10.7.7.15:3128 (10.7.7.15). - connect (110: Connection timed out) Err http://cx.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_US Unable to connect to 10.7.7.15:3128: 10.7.7.15 is an adress in my local network. Somebody please help me :)

  Read the article

• SSH from mac to linux -> start gnome-session -> X11 keyboard mapping all messed up.

  - by Justin

  I have 2 computers: echo.local is running Ubuntu 9.04. justin.local is running Mac OS 10.6.1. X11 version on the mac is 2.3.4. I open X11 on the mac, and open a new xterm window (Applications Menu - Terminal), everything is fine. Keyboard works as expected. I do ssh -X echo.local from the mac (connecting to the linux box), and from the linux command prompt, start xterm - everything is fine. Keyboard works as expected. I do gnome-session from the linux command prompt (through SSH), gnome launches, but keyboard mapping is ALL types of screwed up. If I kill gnome-session and open an xterm via ssh, keyboard mapping is still screwed up. If I then kill the SSH session entirely, and do X11 - Applications Menu - Terminal, opening a brand new xterm window on the mac with no SSH session running at all ... keyboard mapping is still screwed up. Only after I quit X11 and relaunch, is the keyboard mapping back to normal. Keyboard layout under GNOME is Apple-MacBook/MacBook Pro.

  Read the article

• Linux: Force fsck of a read-only mounted filesystem?

  - by Timothy Miller

  I'm developing for a headless embedded appliance, running CentOS 6.2. The user can connect a keyboard, but not a monitor, and a serial console would require opening the case, something we don't want the user to have to do. This all pretty much obviates the possibility of using a recovery USB drive to boot from, unless all it does is blindly reimage the harddrive. I would like to provide some recovery facilities, and I have written a tool that comes up on /dev/tty1 in place of getty to provide these functions. One such function is fsck. I have found out how to remount the root and other file systems read-only. Now that they are read-only, it should be safe to fsck them and then reboot. Unfortunately, fsck complains to me that the filesystems are mounted and refuses to do anything. How can I force fsck to run on a read-only mounted partition? Based on my research, this is going to have to be something obscure. "-f" just means to force repair of a clean (but unmounted) partition. I need to repair a clean or unclean mounted partition. From what I read, this is something "only experts" should do, but no one has bothered to explain how the experts do it. I'm hoping someone can reveal this to me. BTW, I've noticed that e2fsck 1.42.4 on Gentoo will let you fsck a mounted partition, even mounted read-write, but it seems only to do so if fsck is run from a terminal, so it can ask the user if they're sure they want to do something so dangerous. I'm not sure if the CentOS version does the same thing, but it appears that fsck CAN repair a mounted partition, but it flatly refuses to when not run from a terminal. One last-resort option is for me to compile my own hacked fsck. But I'm afraid I'll mess it up in some unexpected way. Thanks! Note: Originally posted here.

  Read the article

• Virtual host config issues in osx 10.7 server app

  - by Benno

  I have two mac mini lion servers setup to run as production and staging machines. My sysadmin decided on these machines over the previous CentOS we had because it had an "interface" to be able to manage it, rather than just the terminal. To be honest, I prefer the terminal. My problem is, the mac osx 10.7 server.app seems to be having issues with the creation of virtual hosts in the 'Web' section. It seems VERY touchy. For example, I cannot create a http virtual host first. I have to create a https host first with a unique dns name 9e..g vuly6), then create the http host with a different dns name to the first (e.g. www), or it appears to override it the first one, even though one is ssl and one is non-ssl. Further, it seems to override perfectly good configurations at random. For example, the default sites directory is usually /Users/default/Sites/Customsites or something, but sometimes when I load the server.app it changes to /var/empty. Also, if I change or add extra virtual hosts after the first one or two, it starts to mess up and the first two virtual hosts start having issues. Has anyone had any experience with setting up virtual hosts via this app? Am I able to manually create these virtual hosts, without using the app, and without the app overriding my settings when I restart apache?

  Read the article

• How do I make XTerm not use bold?

  - by mike

  I like using XTerm, I like its default "fixed" font, and I like using terminal colors rather than having a monochromatic terminal. However, XTerm seems to insist on using a bold version of the font whenever it's displaying a bright color: I hate hate hate the bold version of the font, but I like the brightness. The man page seems to suggest that adding "XTerm.VT100.boldMode:false" to my ~/.Xresources would disable this "feature", but it doesn't seem to have any effect. I've had it in there for months, so it's not a rebooting issue. How can I force XTerm to always use the standard, non-bold version of the fixed font, even when it's displaying bright text? Edit: Some have suggested putting "XTerm*boldMode: false" in my ~/.Xresources. That didn't help either. I've confirmed that the changes have taken effect with xrdb, though: $ xrdb -query | grep boldMode XTerm*boldMode: false And if i run xprop and click an xterm, I get "WM_CLASS(STRING) = "xterm", "XTerm"" .. so i'm definitely running real xterms. BTW, this is just a plain-vanilla Ubuntu Intrepid box. If anyone else here is running the same, can you try running: echo -e '#\e[1m#' ...and let me know whether the # on the right has a black pixel in the middle like the one on the left does?

  Read the article

• Routing data through VPN in linux

  - by Shadyabhi

  I think its a silly question but still here it goes.. Terminal Output: eth0 Link encap:Ethernet HWaddr 00:1c:c0:37:5e:25 inet addr:10.100.98.51 Bcast:10.100.98.255 Mask:255.255.255.0 inet6 addr: fe80::21c:c0ff:fe37:5e25/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:29677 errors:0 dropped:0 overruns:0 frame:0 TX packets:5209 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3179007 (3.1 MB) TX bytes:610142 (610.1 KB) Memory:e0380000-e03a0000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:9555 (9.5 KB) TX bytes:9555 (9.5 KB) vpn_0 Link encap:Ethernet HWaddr 00:ac:39:95:a1:16 inet6 addr: fe80::2ac:39ff:fe95:a116/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1786 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:128597 (128.5 KB) TX bytes:468 (468.0 B) Actually, I followed this tutorial to setup the PacketiX VPN on ubuntu. Now, how do I actually use this VPN? Terminal Output: shadyabhi@shadyabhi-desktop:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 shadyabhi@shadyabhi-desktop:~$ As told in tutorial, if I do route del default route add default dev vpn_0 I am not able to surf the internet. And I get the route command output as: root@shadyabhi-desktop:/home/shadyabhi# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default * 0.0.0.0 U 0 0 0 vpn_0 root@shadyabhi-desktop:/home/shadyabhi# I know I am not able to route the traffic properly. How do i do that?

  Read the article

• Ubuntu root privs installation issue

  - by Pam

  I am a fairly new Ubuntu user (and Linux user, for that matter) and I just downloaded a program whose installer was a .sh file. Not thinking, I copied the installer to an /opt subdirectory, thinking that I was going to install the application there: sudo cp ~/Downloads/fooInstaller.sh /opt/someDir I can't remember, but I either had to use sudo because /opt required it, or I just used it without thinking, but in any case, I prefixed with sudo. Once in /opt/someDir, I executed the installer again, using sudo: sudo sh fooInstaller.sh The terminal went crazy, and a few seconds later, a graphical install wizard popped up that guided me through the rest of the process. At the end of the wizard I was prompted to launch the program, and I did, and everything was great. Until... I closed the program, and attempted to add it to my Ubuntu "panel" (the icon panel at the top of the screen). The program was installed to /usr/local/foo/theProgram, and so I specified that URL as the command in the custom app launcher. When I open the program through the panel/launcher (at the top of the screen), the program doesn't load or operate correctly. I get a lot of error messages complaining about being denied permissions. I'm assuming that this is a "superuser/installation/privs" issue, and not a problem with the application (hence this post at superuser.com instead of the application's forums), because when I launch the program from the terminal with sudo, it opens and executes perfectly fine, just like it did the first time around after the install wizard finished. I realize I'm probably going to have to uninstall the program completely, and re-install it differently. Finally, my question: After uninstalling, can I avoid all these issue by just running the installer (sh fooInstaller.sh) right out of my Downloads directory, sans the sudo prefix? If not, how do I get the program to install without root privs so that I can add it to my panel/launcher and get it executing correctly? Sorry for the long post but I didn't want to omit any details because, as I'm sure you can tell, I'm not really sure I know what I'm doing. Thanks for any help here!

  Read the article

• Broken fonts in Konsole KDE 4.3.4

  - by depesz

  I have a strange situation - after some upgrades a couple of days ago fonts in KDE Konsole broke. To make it more specific - standard fonts look more or less OK, but when I use my national characters (like acelnsózz) they all look broken - like from another font, or badly scaled. The same problem doesn't exist in GNOME Terminal. I usually use the Terminus font, so I used this for demonstration, but it shows in other fonts as well - if that will be necessary I will provide list. Konsole shot: GNOME Terminal shot: As for my settings: =$ cat /etc/X11/xorg.conf Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" Monitor "Monitor0" EndSection Section "InputDevice" Identifier "touchpad" Driver "synaptics" Option "CorePointer" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" InputDevice "touchpad" EndSection =$ xdpyinfo | grep -E resolution\|dimensions dimensions: 1680x1050 pixels (444x277 millimeters) resolution: 96x96 dots per inch I tried forcing DPI in system settings (to 120), or adding monitor size to xorg.conf - so far nothing helped. Any idea on what should I do to make it work sanely again?

  Read the article

• Does Windows 7 Authenticate Cached Credentials on Startup

  - by Farray

  Problem I have a Windows domain user account that gets automatically locked-out semi-regularly. Troubleshooting Thus Far The only rule on the domain that should automatically lock an account is too many failed login attempts. I do not think anyone nefarious is trying to access my account. The problem started occurring after changing my password so I think it's a stored credential problem. Further to that, in the Event Viewer's System log I found Warnings from Security-Kerberos that says: The password stored in Credential Manager is invalid. This might be caused by the user changing the password from this computer or a different computer. To resolve this error, open Credential Manager in Control Panel, and reenter the password for the credential mydomain\myuser. I checked the Credential Manager and all it has are a few TERMSRV/servername credentials stored by Remote Desktop. I know which stored credential was incorrect, but it was stored for Remote Desktop access to a specific machine and was not being used (at least not by me) at the time of the warnings. The Security-Kerberos warning appears when the system was starting up (after a Windows Update reboot) and also appeared earlier this morning when nobody was logged into the machine. Clarification after SnOrfus answer: There was 1 set of invalid credentials that was stored for a terminal server. The rest of the credentials are known to be valid (used often & recently without issues). I logged on to the domain this morning without issue. I then ran windows update which rebooted the computer. After the restart, I couldn't log in (due to account being locked out). After unlocking & logging on to the domain, I checked Event Viewer which showed a problem with credentials after restarting. Since the only stored credentials (according to Credential Manager) are for terminal servers, why would there be a Credential problem on restart when remote desktop was not being used? Question Does anyone know if Windows 7 "randomly" checks the authentication of cached credentials?

  Read the article

• How do I get the F1-F12 keys to switch screens in gnu screen in cygwin when connecting via SSH?

  - by Mikey

  I'm connecting to a desktop running cygwin via SSH from the terminal app in Mac OS X. I have already started screen on the cygwin side and can connect to it over the SSH session. Furthermore, I have the following in the .screenrc file: bindkey -k k1 select 1 # F1 = screen 1 bindkey -k k2 select 2 # F2 = screen 2 bindkey -k k3 select 3 # F3 = screen 3 bindkey -k k4 select 4 # F4 = screen 4 bindkey -k k5 select 5 # F5 = screen 5 bindkey -k k6 select 6 # F6 = screen 6 bindkey -k k7 select 7 # F7 = screen 7 bindkey -k k8 select 8 # F8 = screen 8 bindkey -k k9 select 9 # F9 = screen 9 bindkey -k F1 prev # F11 = prev bindkey -k F2 next # F12 = next However, when I start multiple windows in screen and attempt to switch between them via the function keys, all I get is a beep. I have tried various settings for $TERM (e.g. ansi, cygwin, xterm-color, vt100) and they don't really seem to affect anything. I have verified that the terminal app is in fact sending the escape sequence for the function key that I'm expecting and that my bash shell (running inside screen) is receiving it. For example, for F1, it sends the following (hexdump is a perl script I wrote that takes STDIN in binmode and outputs it as a hexadecimal/ascii dump): % hexdump [press F1 and then hit ^D to terminate input] 00000000: 1b4f50 .OP If things were working correctly, I don't think bash should receive the escape sequence because screen should have caught it and turned it into a command. How do I get the function keys to work?

  Read the article

• Getting Windows (VMware) to load from OSX's localhost without an Internet Connection

  - by Jonah Goldstein

  I'm using MAMP to host my local sites, and VirtualHostX so that I can access sites during local development via a convenient URL like mysite.dev I'm also running Windows XP via VirtualBox, and it would be great to be able to load up any of my local sites within windows while offline as currently often working without access, on the move, unfortunately. I know that I can append my IP and a nice domain name to the host file in C:/WINDOWS/system32/drivers/etc ... and i can find my IP simply through terminal with "ifconfig" while I'm online. The problem is that when I'm not online, there's no IP. Even if there is an IP (when i have a connection), I still have grab it and update the windows hosts' file all the time, since I'm developing from a laptop and have a new IP at the drop of a dime. I found a tutorial where the author is able to get a permanent IP. He uses VMware Fusion as his VMachine, which is the only difference between his setup and mine. By running the terminal command "ifconfig vmnet1" he gets: a secret IP the virtual machine uses to talk to OSX And that doesn't change - which is awesome. I'm assuming it exists even if he's offline. His tutorial is here, http://bit.ly/U2lq It would be pretty fantabulous if I could replicate this with virtualBox. Anyone have ideas? Thanks:)

  Read the article

• Rsync when run in cron doesnt work. Rsync between Mac Os x Server and Linux Centos

  - by Brady

  I have a working rsync setup between Mac OS X Server and Linux Centos when run manually in a terminal. I enter the rsync command, it asks for the password, I enter it and off it goes, runs and completes. Now I know thats working I set out to fully automate it via cron. First off I create an SSH authorized key by running this command on the Mac server: ssh-keygen -t dsa -b 1024 -f /Users/admin/Documents/Backup/rsync-key Entering the password and then confirming it. I then copy the rsync-key.pub file accross to the linux server and place in the rsync user .ssh folder and rename to authorized_keys: /home/philosophy/.ssh/authorized_keys I then make sure that the authorized_keys file is chmod 600 in the folder chmod 700. I then setup a shell script for cron to run: #!/bin/bash RSYNC=/usr/bin/rsync SSH=/usr/bin/ssh KEY=/Users/admin/Documents/Backup/rsync-key RUSER=philosophy RHOST=example.com RPATH=data/ LPATH="/Volumes/G Technology G Speed eS/Backup" $RSYNC -avz --delete --progress -e "$SSH -i $KEY" "$LPATH" $RUSER@$RHOST:$RPATH Then give the shell file execute permissions and then add the following to the crontab using crontab -e: 29 12 * * * /Users/admin/Documents/Backup/backup.sh I check my crontab log file after the above command should run and I get this in the log and nothing else: Feb 21 12:29:00 fileserver /usr/sbin/cron[80598]: (admin) CMD (/Users/admin/Documents/Backup/backup.sh) So I asume everything has run as it should. But when I check the remote server no files have been copied accross. If I run the backup.sh file in a terminal as normal it still prompts for a password but this time its through the Mac Key chain system rather than typing into the console window. With the Mac Key Chain I can set it to save the password so that it doesnt ask for it again but Im sure when run with cron this password isnt picked up. This is where I'm asuming where rsync in cron is failing because it needs a password to connect but I thought the whole idea of making the SSH keys was to prevent the use of a password. Have I missed a step or done something wrong here? Thanks Scott

  Read the article

• Broken fonts in konsole kde 4.3.4

  - by depesz

  I have strange situation - after some upgrade couple of days ago fonts in KDE konsole broke. To make it more specific - standard fonts look more or less ok, but when I use my national characters (like acelnsózz) they all look broken - like from another font, or badly scaled. The same problem doesn't exist in gnome-terminal. I usually use Terminus font, so I used this for demonstration, but it shows in other fonts as well - if that will be necessary I will provide list. Konsole shot: gnome-terminal shot: As for my settings: =$ cat /etc/X11/xorg.conf Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" Monitor "Monitor0" EndSection Section "InputDevice" Identifier "touchpad" Driver "synaptics" Option "CorePointer" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" InputDevice "touchpad" EndSection =$ xdpyinfo | grep -E resolution\|dimensions dimensions: 1680x1050 pixels (444x277 millimeters) resolution: 96x96 dots per inch I tried forcing DPI in system settings (to 120), or adding monitor size to xorg.conf - so far nothing helped. Any idea on what should I do to make it work sanely again?

  Read the article

• OSX 10.6 goes unresponsive

  - by mjb

  This behavior continues to perplex me. My MBP, running 10.6.7, stops responding to all Apple-based software. Whatever software I have open remains open (Terminal, iTunes, Safari), but if I try to use the F-shortcuts or launch any OSX-based software not already open (System Preferences for example) it just bounces in the dock then never launches. I also cannot reboot without hard rebooting. I left terminal open, so I see the following in /var/log/system.log Jun 25 19:39:02 mjb-2 com.apple.ReportCrash.Root[59432]: 2011-06-25 19:39:02.585 ReportCrash[59432:7f1f] Saved crash report for CoreServicesUIAgent[59576] version ??? (???) to /Library/Logs/DiagnosticReports/CoreServicesUIAgent_2011-06-25-193902_localhost.crash Jun 25 19:39:02 mjb-2 com.apple.ReportCrash.Root[59432]: 2011-06-25 19:39:02.586 ReportCrash[59432:b10f] Saved crash report for quicklookd[59571] version ??? (???) to /Library/Logs/DiagnosticReports/quicklookd_2011-06-25-193902_localhost.crash Two requests: (1) please don't send this off to the Apple area so it can die a slow painful rotting death of tumbleweed. (2) Suggest what I should kill -9 or logs to look at to cut this sh*$ out. Cheers, mjb

  Read the article

• Logstash agent doesn't run as a daemon on MAC OS X 10.9.1

  - by user329324

  I need to run the logstash agent as a Daemon on an MAC OS X System whenever the system boots up terminal: /usr/local/logstash/bin/logstash agent -f /usr/local/etc/cvlog.conf Per terminal the program is working succesfully but as an daemon it doesn't start. My com.bcd.logstash.plist <plist version="1.0"> <dict> <key>Label</key> <string>com.bcd.logstash</string> <key>KeepAlive</key> <dict> <key>SuccessfulExit</key> </false> </dict> <key>ProgramArguments</key> <array> <string>/usr/local/logstash/bin/logstash</string> <string>agent</string> <string>-f</string> <string>/usr/local/etc/cvlog.conf</string> </array> <key>RunAtLoad</key> </true> </dict> </plist> I start with: launchtl load /Library/LaunchDaemons/com.bcd.logstash.plist Syslog Error Message com.apple.launchd[1] (com.bcd.logstash[pid]): Exited with code:1 com.apple.launchd[1] (com.bcd.logstash[pid]): Exited with code:143 What's wrong with my plist?

  Read the article

• Bind a key to a commandline command in Mac OS X?

  - by Stefan Lasiewski

  I have a Mac Powerbook running Leopard (10.5.8). Does Leopard provide an easy way to bind keys to commands which are typically run on the commandline? For example, I can open up Terminal.app and run the command /System/Library/Frameworks/ScreenSaver.framework/Resources/ScreenSaverEngine.app/Contents/MacOS/ScreenSaverEngine which will activate the screensaver and lock my screen. What if I want to bind 'Apple-key L' to this command and execute this globally, regardless of which application is in use at the moment? Can I do this, or can I only run ScreenSaverEngine from a Terminal window? I tried to set up global keyboard shortcuts, but it seems that this won't allow me to bind a key to an arbitrary shell command: Note: You can create keyboard shortcuts only for existing menu commands. You cannot define keyboard shortcuts for general purpose tasks such as opening an application or switching between applications. I tried to set up a application keyboard shortcut, but commands like ScreenSaverEngine don't seem to be an application. Note that this Screensaver/Lock screen is just one example. I have come across other nifty commands which I might want to bind to a key-combination as well. I can do this in Gnome and Windows (with varying success). How about with Leopard? Should I be looking at doing this with AppleScript? (I haven't used that since the Hypercard days ...)

  Read the article

• ssh connection operation timed out using rsync

  - by Mark Molina

  I use rsync to backup my remote server on my local device but when I combine it with a cron job my ssh times out. Just to be clear, the data is stored on a remote server and I want it stored on my local server. The backup request must be sent from my local server to the remote server. The command for backup up the data is working when I just type it in terminal like this: rsync -chavzP --stats USERNAME@IPADDRES: PATH_TO_BACKUP LOCAL_PATH_TO_BACKUP but when I combine it with a cron job like this: 10 11 * * * rsync -chavzP --stats USERNAME@IP_ADDRESS: PATH_TO_BACKUP LOCAL_PATH_TO_BACKUP the ssh connection times out. When the cronjob executes it send a mail to the root user with the output like this: From local.xx.xx.xx Tue Jul 2 11:20:17 2013 X-Original-To: username Delivered-To: [email protected] From: [email protected] (Cron Daemon) To: [email protected] Subject: Cron <username@server> rsync -chavzP --stats USERNAME@IPADDRES: PATH_TO_BACKUP LOCAL_PATH_TO_BACKUP X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=username> X-Cron-Env: <USER=username> X-Cron-Env: <HOME=/Users/username> Date: Tue, 2 Jul 2013 11:20:17 +0200 (CEST) ssh: connect to host IP_ADDRESS port XX: Operation timed out rsync: connection unexpectedly closed (0 bytes received so far) [receiver] rsync error: unexplained error (code 255) at /SourceCache/rsync/rsync-42/rsync/io.c(452) [receiver=2.6.9] So the rsync command is working when just typed in terminal but not when used by a cronjob. Can anybody explain this?

  Read the article

• How to Load Balance 2 Internet Connections on a Windows 7 machine?

  - by Jimmy Chandra

  It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

  Read the article

• port forwarding with socks over proxy

  - by Oz123

  I am trying to browse a wiki that runs on a server inside one domain from another domain. The wiki is accessible only on the LAN, but I need to browse it from another LAN to which I connect with an SSH tunnel ... Here is my setup and the steps I did so far: ~.ssh/confing on wikihost: Host gateway User kisteuser Port 443 Hostname gateway.companydomain.com ProxyCommand /home/myuser/bin/ssh-https-tunnel %h %p # ssh-https-tunnel: # http://ttcplinux.sourceforge.net/tools/stunnel Protocol 2 IdentityFile ~/.ssh/key_dsa LocalForward 11069 localhost:11069 Host server1 User kisteuser Hostname localhost Port 11069 LocalForward 8022 server1:22 LocalForward 17001 server1:7100 LocalForward 8080 www-proxy:3128 RemoteForward 11069 localhost:22 from wikihost myuser@wikihost: ssh -XC -t gateway.companydomain.com ssh -L11069:localhost:22 server1 on another terminal: ssh gateway.companydomain.com Now, on my companydomain I would like to start firefox and browse the wiki on wikihost. I did: [email protected] ~ $ ssh gateway Have a lot of fun... kisteuser@gateway ~ $ ssh -D 8383 localhost user@localhost's password: user@wikiserver:~> My .ssh/config on that side looks like that: host server1 localforward 11069 localhost:11069 host localhost user myuser port 11069 host wikiserver forwardagent yes user myuser port 11069 hostname localhost Now, I started firefox on the server called gateway, and edited the proxy settings to use SOCKSv5, specifying that the proxy should be gateway and use the port 8383... kisteuser@gateway ~ $ LANG=C firefox -P --no-remote And, now I get the following error popping in the Terminal of wikiserver: myuser@wikiserver:~> channel 3: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused Confused? Me too ... Please help me understand how to properly build the tunnels and browse the wiki over SOCKS protocol. update: I managed to browse the wiki on wikiserver with the following changes: host wikiserver forwardagent yes user myuser port 11069 hostname localhost localforward 8339 localhost:8443 Now when I ssh gateway I launch Firefox and go to localhost:8339 and I hit the start page of the wiki, which is served on Port 8443. Now I ask myself is SOCKS really needed? Can someone elaborate on that ?

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >