Search Results

Search found 2349 results on 94 pages for 'zune hd'.

Page 85/94 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • Linux can dual display but windows can't?

    - by Mr_CryptoPrime
    I have two monitors, one that is hdmi-to-dvi and the other vga-to-dvi. I have an AMD HD Radeon 6900 series graphics card installed. I got Ubuntu to display dual monitors, but then I restarted for an update and then Ubuntu wouldn't even boot in recovery mode, it just kept cycling forever...displaying something about "timeout: killing [filepath] [hexadecimal]. So I tried booting into windows (7-professional) and it crashed and displayed this after rebooting: IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT-IN-NONPAGED-AREA. I went into Bios and reverted to the system defaults and ran system restore and it booted ok, but the dvi-to-dvi monitor would not display. I made sure my drivers were updated and catalyst was updated. Also through research discovered only one is for vga and the other is digital only, so I put the vga-to-dvi in the vga slot and so on. Neither windows or catalyst will detect the dvi-to-dvi montior. Any suggestions? Thanks. EDIT: Found out that booting into Ubuntu with only one monitor (using either monitor with either cable) worked perfectly fine. I could then add another monitor and it displays ok. However, it will, out of the blue, suddenly distort the display. At first I thought the computer crashed, but it is something with the video output from the GPU to the monitor because I pushed the power button and it would refresh every 5secs or so and I could see the "Ubuntu will power down in X seconds", even though it was horribly distorted. Any ideas what's causing this?

    Read the article

  • Y560 Lenovo IdeaPad bandwidth issue

    - by Vlakarados
    I have a Y560 Lenovo IdeaPad, my config: i7 740QM, 4GB RAM, RADEON HD 6570m/5700 1024MB and my network adapter is Intel WIFI Link 5150. The laptop is 2 years old and the problem I'm about to describe is present from the first day. As may be seen here, the receive bandwidth should be up to 300 Mbps, but the maximum download speed from LAN and using torrents is about 2.4MB/s. My internet connection is 100Mbps and other laptops in my house have the appropriate download speed - up to 12MB/s, I have tested at my friends house and at my job, the speed remains the same. I have tried all possible configurations I could think of in network settings - nothing helps. I use Windows 7 and I have had installed different versions (Ultimate, Professional, Home, OEM Home, 64 and 32 bit versions). Some time ago I searched for the problem and found one or two threads that had the same problem and there were something said about a limitation in firmware that some experienced users have managed to bypass. Updating drivers didn't help me either. Is there any reliable way to fix this?

    Read the article

  • Does VLC Player work well on Windows 7 64-bit?

    - by ????
    I tried VLC Player on Windows 7 64-bit version and the playback was fine, but when the video is maximized the image is very pixelated. I tried this on a Radeon HD 2600 XT graphics card as well as a computer with an Intel graphics chipset and both have the same result. If I use VLC Player on Windows 7 32-bit instead of 64-bit, there is no pixelation. Is this a known problem or is there any method to fix it on Windows 7 64-bit? Update: there isn't a 32-bit vs 64-bit version of VLC player, is there? (unlike 7-Zip) I also tried GOM Player and it doesn't have the problem on Windows 7 64-bit. Update: Nov 4, 2009 VLC displays an update notice: VLC 1.0.3 is a minor release fixing many bugs, especially for Windows Vista and 7, but it also introduces 2 new modes for deinterlacing, and a new udev module. Major fixes are about WMA Pro support, Dolby tracks in 4.0, v4l/v4l2 and atsc and a crash in mjpeg demuxer. Update of translations are also part of this release.

    Read the article

  • Windows 8 doesn't start up after installation

    - by Raj BD
    I have a DELL INSPIRON n5110 machine running Windows 7 Home Premium 64-bit. It has 6GB of RAM and 500 GB hard disk capable to run any Windows and Linux system. And I recently attempted to install Windows 8 in the machine. Installation goes fine and smooth until the final stage when windows is done installing and GETS DEVICES READY. When GETTNG DEVICES READY reaches about 60%, the screen goes blank with the machine running. After a while it reboots. And after the new Windows Logo with dotted circles are done showing up, the screen goes blank again (when we'd expect login screen to show up). There is not even a cursor. I can see the HARD DISK ACTIVITY LED blinking but nothing shows up in the screen. I've tried CLEAN INSTALL several times. The DVD is fine, it installed and worked well in my friends' laptop PCs. I tried installing both PRO version and ENTERPRISE version and both 32-bit and 64-bit. But the problem was same everytime. Finally, I had to reinstall Windows 7 which installed and ran without any problem. The problem, we can guess, is GRAPHICS perhaps. I have Intel SandyBridge Graphics Mobile Chipset (Intel HD Graphics 3000). But if Windows 7 and Linux distrubutions like Mint and BackTrack can run on the machine, why on earth, would Windows 8 not run?

    Read the article

  • Mac OS X: Applications not responding

    - by Robot55
    This happens to me several times a day. I'll quit an app, the window will close, but the app won't finish shutting down. It stays open in the dock, and right clicking and force quit show not responding. Force quit won't work. I can't shut the app down. Starting any other app when this happens causes that app to behave in exactly the same way: the icon opens in the dock, but the app is non-responsive and can't be forced to quit. Can't access terminal when this happens, because it locks up just like all the apps. While I haven't tried to open every app, I think any app I try to open when this is happening will lock up. If I relaunch Finder, it too locks up and then the only thing left is to hold down the power button for a hard reboot. Any app that is running while this is happening will continue to run normally unless I try to shut it down. Repairing disk permissions has no effect. I also did a time machine and a full restore on a brand new MbP - and sure enough, after restore, the new MbP suffers form the same problem. Creating a new user has no effect. Any thoughts? Please help MacBook Pro 15" AG 2.53ghz i5 cpu 8gb RAM 500gb HD (over 200gb free)

    Read the article

  • 2 Days of Share &amp; Point

    - by Mark Rackley
    Groovy man… SharePoint Saturday Ozarks is back for 2010, bigger and better than before. Join us for a far out time and learn more about SharePoint in one day than you could in a year from the man… Yes! SharePoint Saturday Ozarks is back! SharePoint Saturday Ozarks is the largest SharePoint conference in Arkansas, Southern Missouri, and the very north east tip of Oklahoma. Last year we had a great turn out with 20 speakers, 5 MVPs, and attendees coming from Arkansas, Texas, Oklahoma, Missouri, Kansas, Nebraska, Indiana, Ohio, Alabama, Michigan, and Washington. Hey Man… what’s SharePoint Saturday anyway? Sounds like a conspiracy man… Not to worry, SharePoint Saturday is not an arm of the government bent on mind control or any attempt what-so-ever to bring you down man. SharePoint Saturday is grass roots effort started by Michael Lotter (http://www.sharepointsaturday.org/pages/about.aspx). It is a FREE one day event where the best SharePoint speakers gather to present their love, hatred, and frustrations of SharePoint to those lucky individuals who attend. Lessons are learned, contacts are made, prizes are won, food is eaten, assorted beverages are consumed until wee hours of the morning. SharePoint Saturday started with just a few sporadic one day events here and there. However, over the past year SharePoint Saturday has exploded and it’s hard to find a weekend where there is NOT a SharePoint Saturday event happing in some corner of the globe. There are even occasions where there are two SharePoint Saturdays on the same day! Many people are pleasantly surprised at the caliber of speakers at these SharePoint Saturday events. For the most part, these speakers are more eloquent, practiced, and practical than those speakers you find at the major multi-day conferences. These guys aren’t even paid to speak.. they do it out of love man… SharePoint Saturday Ozarks 2009 Alumni We had a star studded cast last year with many returning this year! Just check out the fun that they had… John Ferringer – Admin rockstar… I can still sense the awesomeness   SharePoint poster children Mike Watson & Laura Rogers     Lori Gowin spreading the SharePoint Love Eric Shupps is a little bit country and a little bit rock and roll       Cathy Dew, Sean McDonough, and JD Wade relaxing between gigs Actually, you can see real photos from last year’s SharePoint Saturday ozarks here:  picasaweb.google.com/mrackley/SharePointSaturdayOzarks#    What’s new for SharePoint Saturday Ozarks 2010 SharePoint Saturday Ozarks 2010 will totally blow your mind man. We’re getting the band back to together with many returning speakers and few new faces. Joel Oleson will be speaking this year, maybe he’ll grace us with his song stylings. Sadly, once again, Andrew Connell will not be able to attend SharePoint Saturday Ozarks, however he did feel the need to show his support in his own way. Prizes this year currently include books, software, a Zune HD, and much more! Wait Man… You said 2 days? I thought it was a one day event? Correct you are my herbal smelling friend… SharePoint Saturday Ozarks 2010 will spread the love an additional day this year. The first day will be all about the SharePoint love, on day 2 we will be taking a leisurely float down the Buffalo National River for those interested in a truly unique experience (no banjos allowed please).   Here are the details: WHAT 4 – 5 hour float down the Buffalo National River WHEN & WHERE Sunday June 13th. We will be leaving at 10am from the Parking Lot of: Gordon’s Motel & Canoe Rental Old Highway 7 Jasper, AR 72641 (870) 446-5252 Jasper is about 30 minutes south of Harrison, AR on Highway 7 South. You are responsible for bumming a ride to/from Gordon’s Motel, but they will be shuttling us to/from the river and providing canoes and a boxed lunch. WHAT ELSE? The float trip is dependent on the weather of course, we won’t be floating down the river in a thunderstorm, however I planned SPS Ozarks around a time of year ideal for floating. We aren’t talking class 5 rapids here, you don’t need any real skill, but you need to be okay with possibly tipping your canoe over once or twice. You can bring your own assorted beverages with you, but glass containers are not allowed on the river. I suggest a small cooler with extra snacks and drinks. Also bring clothing you can get wet in (these SharePoint people can get ornery). HOW DO I SIGN UP? When you register for SharePoint Saturday Ozarks, you will have the option to also sign up for the float trip. Seats are limited though! If you do not intend to go, please do not take someone else’s place.  The cost for the float trip will be about $35 dollars per person (which you are responsible for unless we find a sponsor). The price includes shuttle to/from river, canoe, life jackets, paddles, and boxed lunch. Far out man… how do I register??? You can register for SharePoint Saturday Ozarks by going to http://spsozarks.eventbrite.com/ We are limited to 200 people for the conference and 50 people for the float trip, so register today before we are sold out. Lodging for SharePoint Saturday Ozarks will once again take place at the Hotel Seville: Annex Suites are available for $103.20 This is So Groovy.. How can I help? I’m glad you asked! We are still looking for a few sponsors and one or two more speakers. If you are interested please let me know!  You can find out more information at http://www.sharepointsaturday.org/ozarks Hey… wait a minute…. what exactly IS SharePoint man??? Come to SharePoint Saturday Ozarks and find out!!  See you guys there!

    Read the article

  • Nokia Windows Phone 8 App Collection

    - by Tim Murphy
    I recently upgraded to a Nokia Lumia 920.  Along with it came the availability of a number of Nokia developed apps or apps that Nokia has made available from other developers.  Below is a summary of some of the ones that I have used to this point.  There are quite a few of them so I won’t be covering everything that is available. Nokia Maps I am quite pleased with the accuracy of Nokia Maps and not having to tap the screen for each turn any more.  The information on the screen is quite good as well.  The couple of improvements I would like to see are for the voice directions to include which street or exit you need to use and improve the search accuracy.  Bing maps had much better search results in my opinion. Nokia Drive This one really had me confused when I first setup the phone.  I was driving down the road and suddenly I am getting notification tones, but there were no visual notifications on the phone.  It seems that in their infinite wisdom Nokia thinks I don’t know when I am going over the speed limit and need to be told. ESPN I really liked my ESPN app on Windows Phone 7.5, but I am not getting the type of experience I was looking for out of this app.  While it allows me to pick my favorite teams, but there isn’t a pivot page or panorama page that shows a summary of my favorite teams.  I have also found that the live tile don’t update very often.  Over all I am rather disappointed compared app produced by ESPN. Smart Shoot I really need to get the kids to let me use this on.  I like the concept, but I need to spend more time with it.  The idea how running the camera through a continuous shooting mode and then picking the best is something that I have done with my DSLR and am glad to see it available here. Cinemagraph Here is a fun filter.  It doesn’t have the most accurate editing features, but it is fun to stop certain parts of a scene and let other parts move.  As a test I stopped the traffic on the highway and let the traffic on the frontage road flow.  It makes for a fun effect.  If nothing else it could be great for sending prank animations to your friends. YouSendIt I have only briefly touched this application.  What I don’t understand is why it is needed.  Most of the functionality seems to be similar to SkyDrive and it gives you less storage.  They only feature that seems to differentiate the app is the signature capability. Creative Studio This app has some nice quick edits, but it is not very comprehensive.  I am also not to thrilled with the user experience.  It puts you though an initial color cast series that I’m not sure why it is there.  Discovery of the remaining adjustments isn’t that great.  In the end I found myself wanting Thumbia back. Panorama This is one of the apps that I like.  I found it easy to use as it guides you with a target circle that you center for it to take the next pictures.  It also stitches the images with amazing speed.  The one thing I wish it had was the capability to turn the phone into portrait orientation and do a taller panorama.  Perhaps we will see this in the future. Nokia Music After getting over the missing album art I found that there were a number of missing features with this app as well.  I have a Zune HD and I am used to being able to go through my collection and adding songs, albums or artists to my now playing.  There also doesn’t seem to be a way to manage playlists that I have seen yet.  Other than that the UI is familiar and it give Nokia City Lens Augmented reality is a cool concept, but I still haven’t seen it implemented in a compelling fashion beyond a demo at TED a couple of years ago.  The app still leaves me wanting as well.  It does give an interesting toy.  It gives you the ability to look for general categories and see general direction and clusters of locations.  I think as this concept is better thought out it will become more compelling. Nokia Trailers I don’t know how often I will use this app, but I do like being able to see what movies are being promoted.  I can’t wait for The Hobbit to come out and the trailer was just what the doctor ordered.  I can see coming back to this app from time to time. PhotoBeamer PhotoBeamer is a strange beast that needs a better instruction manual.  It seems a lot like magic but very confusing.  I need some more testing, but I don’t think this is something that most people are going to understand quickly and may give up before getting it to work.  I may put an update here after playing with it further. Ringtone Maker The app was just published and it didn’t work very well for me. It couldn’t find 95% of the songs that Nokia Music was playing for me and crashed several times.  It also had songs named wrong that when I checked them in Nokia Music they were fine.  This app looks like it has a long way to go. Summary In all I think that Nokia is offering a well rounded set of initial applications that can get any new owner started.  There is definitely room for improvement in all of these apps.  The main need is usability upgrades.  I would guess that with feedback from users they will come up to acceptable levels.  Try them out and see if you agree. del.icio.us Tags: Windows Phone,Nokia,Lumia,Nokia Apps,ESPN,PhotoBeamer,City Lens,YouSendIt,Drive,Maps

    Read the article

  • Converting linear colors to SRGB shows banding in FFmpeg

    - by user1863947
    When I convert an EXR file sequence with x264 using FFmpeg and convert the colorspace from linear to SRGB (with gamma 0.45454545) I get some heavy banding issues (most visible on a dark gradient). Here is the ffmpeg command I use: C:/ffmpeg.exe -y -i C:/seq_v001.%04d.exr -vf lutrgb=r=gammaval(0.45454545):g=gammaval(0.45454545):b=gammaval(0.45454545) -vcodec libx264 -pix_fmt yuv420p -preset slow -crf 18 -r 25 C:/out.mov Here is the output: ffmpeg version N-47062-g26c531c Copyright (c) 2000-2012 the FFmpeg developers built on Nov 25 2012 12:25:21 with gcc 4.7.2 (GCC) configuration: --enable-gpl --enable-version3 --disable-pthreads --enable-runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libutvideo --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib libavutil 52. 9.100 / 52. 9.100 libavcodec 54. 77.100 / 54. 77.100 libavformat 54. 37.100 / 54. 37.100 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 23.102 / 3. 23.102 libswscale 2. 1.102 / 2. 1.102 libswresample 0. 17.101 / 0. 17.101 libpostproc 52. 2.100 / 52. 2.100 Input #0, image2, from 'C:/seq_v001.%04d.exr': Duration: 00:00:09.60, start: 0.000000, bitrate: N/A Stream #0:0: Video: exr, rgb48le, 960x540 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 25 tbn, 25 tbc [libx264 @ 0000000004d11540] using SAR=1/1 [libx264 @ 0000000004d11540] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0000000004d11540] profile High, level 3.1 [libx264 @ 0000000004d11540] 264 - core 128 r2216 198a7ea - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=5 deblock=1:0:0 analyse=0x3:0x113 me=umh subme=8 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=18 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=2 b_bias=0 direct=3 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=50 rc=crf mbtree=1 crf=18.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mov, to 'C:/out.mov': Metadata: encoder : Lavf54.37.100 Stream #0:0: Video: h264 (avc1 / 0x31637661), yuv420p, 960x540 [SAR 1:1 DAR 16:9], q=-1--1, 12800 tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (exr -> libx264) Press [q] to stop, [?] for help [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute frame= 16 fps=0.0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute frame= 34 fps= 33 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute frame= 52 fps= 34 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute frame= 68 fps= 34 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute frame= 85 fps= 33 q=23.0 size= 47kB time=00:00:00.44 bitrate= 867.5kbits/s Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute frame= 104 fps= 34 q=23.0 size= 94kB time=00:00:01.20 bitrate= 640.3kbits/s Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute frame= 121 fps= 34 q=23.0 size= 133kB time=00:00:01.88 bitrate= 577.8kbits/s Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute frame= 139 fps= 34 q=23.0 size= 172kB time=00:00:02.60 bitrate= 543.4kbits/s Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute frame= 157 fps= 34 q=23.0 size= 213kB time=00:00:03.32 bitrate= 525.6kbits/s Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute frame= 175 fps= 34 q=23.0 size= 254kB time=00:00:04.04 bitrate= 516.0kbits/s Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute frame= 193 fps= 35 q=23.0 size= 287kB time=00:00:04.76 bitrate= 494.6kbits/s Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute frame= 211 fps= 35 q=23.0 size= 332kB time=00:00:05.48 bitrate= 496.4kbits/s Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute frame= 228 fps= 34 q=23.0 size= 421kB time=00:00:06.16 bitrate= 559.8kbits/s frame= 240 fps= 32 q=-1.0 Lsize= 708kB time=00:00:09.52 bitrate= 609.3kbits/s video:705kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.505636% [libx264 @ 0000000004d11540] frame I:2 Avg QP:15.07 size: 18186 [libx264 @ 0000000004d11540] frame P:73 Avg QP:16.51 size: 3719 [libx264 @ 0000000004d11540] frame B:165 Avg QP:18.38 size: 2502 [libx264 @ 0000000004d11540] consecutive B-frames: 2.5% 3.3% 42.5% 51.7% [libx264 @ 0000000004d11540] mb I I16..4: 46.2% 33.3% 20.4% [libx264 @ 0000000004d11540] mb P I16..4: 6.8% 2.0% 0.6% P16..4: 29.4% 10.5% 4.6% 0.0% 0.0% skip:46.1% [libx264 @ 0000000004d11540] mb B I16..4: 1.8% 0.7% 0.2% B16..8: 40.9% 6.5% 0.3% direct: 1.2% skip:48.5% L0:52.0% L1:47.5% BI: 0.5% [libx264 @ 0000000004d11540] 8x8 transform intra:24.7% inter:81.3% [libx264 @ 0000000004d11540] direct mvs spatial:93.3% temporal:6.7% [libx264 @ 0000000004d11540] coded y,uvDC,uvAC intra: 10.7% 31.4% 24.9% inter: 2.3% 9.0% 2.9% [libx264 @ 0000000004d11540] i16 v,h,dc,p: 83% 11% 6% 1% [libx264 @ 0000000004d11540] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 9% 9% 52% 6% 4% 4% 5% 5% 5% [libx264 @ 0000000004d11540] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 11% 44% 5% 4% 3% 3% 4% 3% [libx264 @ 0000000004d11540] i8c dc,h,v,p: 69% 15% 15% 2% [libx264 @ 0000000004d11540] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0000000004d11540] ref P L0: 48.9% 0.1% 16.8% 17.0% 11.3% 5.8% [libx264 @ 0000000004d11540] ref B L0: 57.7% 21.9% 13.9% 6.4% [libx264 @ 0000000004d11540] ref B L1: 82.4% 17.6% [libx264 @ 0000000004d11540] kb/s:600.61 For me it looks like it converts the video first and afterwards applies the gamma correction on 8-bit clipped video. Does someone have an idea?

    Read the article

  • default xna 4.0 gametime don´t works well for 2D physics

    - by EusKoder
    I am developing a game using Visual Studio 2010 and XNA 4.0, after advancing to some extent with the project (a platform based 2d platformer msdn starter kit) I got to test it on different computers with different hardware (CPU, graphics, etc.) and I found that the speed of movement object of the game is quite different, I implemented the PSK physics msdn that are based on time, /// <summary> /// Updates the player's velocity and position based on input, gravity, etc. /// </summary> public void ApplyPhysics(GameTime gameTime) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; Vector2 previousPosition = Position; // Base velocity is a combination of horizontal movement control and // acceleration downward due to gravity. velocity.X += movement * MoveAcceleration * elapsed; velocity.Y = MathHelper.Clamp(velocity.Y + GravityAcceleration * elapsed, -MaxFallSpeed, MaxFallSpeed); velocity.Y = DoJump(velocity.Y, gameTime); // Apply pseudo-drag horizontally. if (IsOnGround) velocity.X *= GroundDragFactor; else velocity.X *= GroundDragFactor; //velocity.X *= AirDragFactor; // Prevent the player from running faster than his top speed. velocity.X = MathHelper.Clamp(velocity.X, -MaxMoveSpeed, MaxMoveSpeed); // Apply velocity. Position += velocity *elapsed; Position = new Vector2((float)Math.Round(Position.X), (float)Math.Round(Position.Y)); // If the player is now colliding with the level, separate them. HandleCollisions(gameTime); // If the collision stopped us from moving, reset the velocity to zero. if (Position.X == previousPosition.X) velocity.X = 0; if (Position.Y == previousPosition.Y) { velocity.Y = 0; jumpTime = 0.0f; } } tested eg with a PC (PC1) 2.13GHz Intel Core 2 6400 / ATI Radeon HD 4670 and another one: (pc2) 3.00GHz Intel Pentium D / Intel 82945G Express Chipset Family by displacement difference (moving x axis at supossed (position = velocity * gametime.ElapsedGameTime.TotalSeconds) constant velocity, for example) is 3 seconds in a total of 20 (example: moving pc1 player sprite 6000 pixels in the x-axis at 20 seconds and pc 2 runs the same distance in 17 ). Tested on a 3rd PC: i72700k / Gigabyte GTX 560 TI the results are even worse, after some time after starting the game gets like 3 times slower and showing the number of pixels in each frame moved in a debug window in the game (counting updatespersecond with counter variable for updates cuantity and gametime for counting a second show 63fps), it appears as if the number is always constant ( refreshments lose the Update method?). In this pc if I put the game in fullscreen during the course of the game, the effect of "go slow" is immediate and restore window mode sometimes yield returns to "normal" and sometimes not. Eventually I began to try a new project to test whether the movement is constant in different pc loading only one sprite and its position value in screen printing. Occur The same. I even tried moving a constant amount of pixels explicitly (position + = 5) and different speeds in different pc quantities of pixels moved in x time. I have the game loop as the default (fixedTimeStep=true;SynchronizeWithVerticalRetrace=true;). I've also tried turning off and creating another timestep as discussed in different post (eg http://gafferongames.com/game-physics/fix-your-timestep/ but i can´t achieve the desired result, move the same number of pixels in X seconds on different computers with windows. All pc used for tests use windows 7 enterprise pc1 == x86 the others are x64. The weirdest thing is that I find information about people describing the same problem and that I wear long nights of searches. Thanks for your help.

    Read the article

  • Ubuntu 12.04 doesn't recgonize m CPU correctly

    - by Nightshaxx
    My computer is running ubuntu 12.04 (64bit), and I have a AMD Athlon(tm) X4 760K Quad Core Processor which is about 3.8ghz (and an Radeon HD 7770 GPU). Yet, when I type in cat /proc/cpuinfo - I get: processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 16 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 1 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 17 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 2 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 2 apicid : 18 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 3 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 2 apicid : 19 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro The important part of all this being, cpu MHz : 1800.000 which indicates that I have only 1.8ghz of processing power, which is totally wrong. Is it something with drivers or Ubuntu?? Also, will windows recognize all of my processing power? Thanks! (NOTE: My cpu doesn't have intigrated graphics

    Read the article

  • Microsoft Ergonomic 7000 keyboard + mouse lag

    - by user115210
    I recently bought a new Microsoft Ergonomic 7000 keyboard. I started to use it with my Ubuntu 12.04 and it lags all the time. I try to be more specific: Even on a minor CPU usage the mouse lags. By minor I mean firefox loading a webpage, or opening an application like conky, gnome-terminal etc. When higher CPU usage occurs the keyboard is lagging too, but by this I mean it misses my hits, so what I type won't appear later. What I tried so far (and did not work)? Disable autosuspend (echo -1 to sys/bus/usb.../autosuspend) and at the same place set level to "on". I have tried several video drivers: Vesa, radeon, newest catalyst (and catalyst beta too) When my keyboard and/or mouse lags I tried an other USB keyboard which works perfectly and the same for the mouse. I tried the keyboard and mouse on a different computer with Linux (Ubuntu, Arch, OpenSuse) too, the same problem appears but not on Windows. I tried to replace the battery sets, and to change channel on the dongle. And also tried to use the dongle from other USB ports. On the same time I am able to use any other wireless mouse. I changed the XkbModel to "microsoft7000" but it did not solve anything. About the hardware: AMD A8 3870K - Radeon HD6550D 8 GB of memory 4 GB of swap (which is almost never used) Here are my PC's details: lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 045e:071d Microsoft Corp. Bus 005 Device 002: ID 0461:4ea7 Primax Electronics, Ltd lspci: 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6550D] 00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [IDE mode] (rev 40) 00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] Hudson IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:15.0 PCI bridge: Advanced Micro Devices [AMD] Device 43a0 00:15.1 PCI bridge: Advanced Micro Devices [AMD] Device 43a1 00:16.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:16.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -n 150: http://pastebin.com/sGUAAiUe cat /var/log/Xorg.0.log: http://pastebin.com/fny7ZkN4 Note: The Icon7 Twister Evolution is the replacement mouse to use.

    Read the article

  • Content Challenge: You Can Only Get it Here

    - by Mike Stiles
    Part of the content conundrum for brands is figuring out what kind of content customers would find cool, desirable, and relevant. The mere fact many brands have no idea what this content might be is, in itself, pretty alarming. You’d have to have a pretty thorough lack of involvement with and understanding of your customers to not know what they might like. But despite what should be a great awakening in which consumers are using every technology and trick in the book to shield themselves from ads and commercials, brand self-obsession continues as marketers concentrate on their message, their campaign, what they want to say, and what they want social users to do. When individuals conduct themselves in that same fashion on Facebook and Twitter, it gets tiresome and starts losing value pretty quickly. Their posts eventually get hidden. Conversely, friends who post things that consistently entertain or inform, with little self-marketing desperation involved, win the coveted “show all updates” setting. Of course brands are going to use social to market. It’s pretty much the point of having social in the marketing mix. And yes, people who follow a brand’s Twitter account or “Like” a brand’s Facebook Page implicitly state they want to know what’s going on with that brand’s products and services. But if you have a Facebook friend that assumes you want every one of her posts to be about what wine she likes (Mitsubishi’s current campaign is even based around weeding out pretentious Facebook friends, then running them over), then you know how it must feel for your fans and followers to get a sales pitch for your crackers or whatever you’re selling every single time. Is there such a thing as content that doesn’t sell but that still advances the brand and makes the consumer more involved and valuable? Of course. And perhaps there are no better companies than enterprise brands to do it. Enterprise organizations are large enough to go beyond a product and engage readers/viewers at higher, broader levels…communicating expertise across entire sectors, subjects and industries. You’re going from pitchman to news source, and getting full credit for it as the presenter. A recent GigaOM article pointed out the success a San Francisco-based startup called Crunchyroll is having. Their niche (and they proudly admit it’s a niche) is providing Japanese anime, Korean drama and Asian live action content to countries that can’t get it any other way via licensing deals. Shows are available in HD and on the same day they air in the host country. Crunchyroll not only gets 8 million viewers a month, they have 100,000 paying subscribers at $7-12/month. Got a point, Mike? I do happen to have one. Crunchyroll illustrates the content opportunity enterprise companies have…which is to determine your “area,” the interest graph of your customers, then provide content that speaks to and satisfies those interests that can’t be found anywhere else. At least not in the same style, or of the same quality, or with the same authority. Do what no one else is doing. Provide what no one else is providing in your sector. If underserved users are willing to pay monthly for access to awkwardly moving cartoon dragons, imagine the audience you could attract with free, useful, non-sales content in your customers’ area of interest. It’s an audience you’ll want in place when the time does come to put out that marketing message. A content challenge is better than a content conundrum any day.

    Read the article

  • Free RAM disappears - Memory leak?

    - by Izzy
    On a fresh started system, free reports about 1.5G used RAM (8G RAM alltogether, Ubuntu 12.04 with lightdm and plasma desktop, one konsole window started). Having the apps running I use, it still consumes not more than 2G. However, having the system running for a couple of days, more and more of my free RAM disappears -- without showing up in the list of used apps: while smem --pie=name reports less than 20% used (and 80% being available), everything else says differently. free -m for example reports on about day 7: total used free shared buffers cached Mem: 7459 7013 446 0 178 997 -/+ buffers/cache: 5836 1623 Swap: 9536 296 9240 (so you can see, it's not the buffers or the cache). Today this finally ended with the system crashing completely: the windows manager being gone, apps "hanging in the air" (frameless) -- and a popup notifying me about "too many open files". Syslog reports: kernel: [856738.020829] VFS: file-max limit 752838 reached So I closed those applications I was able to close, and killed X using Ctrl-Alt-backspace. X tried to come up again after that with failsafeX, but was unable to do so as it could no longer detect its configuration. So I switched to a console using Ctrl-Alt-F2, captured all information I could think of (vmstat, free, smem, proc/meminfo, lsof, ps aux), and finally rebooted. X again came up with failsafeX; this time I told it to "recover from my backed-up configuration", then switched to a console and successfully used startx to bring up the graphical environment. I have no real clue to what is causing this issue -- though it must have to do either with X itself, or with some user processes running on X -- as after killing X, free -m output looked like this: total used free shared buffers cached Mem: 7459 2677 4781 0 62 419 -/+ buffers/cache: 2195 5263 Swap: 9536 59 9477 (~3.5GB being freed) -- to compare with the output after a fresh start: total used free shared buffers cached Mem: 7459 1483 5975 0 63 730 -/+ buffers/cache: 689 6769 Swap: 9536 0 9536 Two more helpful outputs are provided by memstat -u. Shortly before the crash: User Count Swap USS PSS RSS mail 1 0 200 207 616 whoopsie 1 764 740 817 2300 colord 1 3200 836 894 2156 root 62 70404 352996 382260 569920 izzy 80 177508 1465416 1519266 1851840 After having X killed: User Count Swap USS PSS RSS mail 1 0 184 188 356 izzy 1 1400 708 739 1080 whoopsie 1 848 668 826 1772 colord 1 3204 804 888 1728 root 62 54876 131708 149950 267860 And after a restart, back in X: User Count Swap USS PSS RSS mail 1 0 212 217 628 whoopsie 1 0 1536 1880 5096 colord 1 0 3740 4217 7936 root 54 0 148668 180911 345132 izzy 47 0 370928 437562 915056 Edit: Just added two graphs from my monitoring system. Interesting to see: everytime when there's a "jump" in memory consumption, CPU peaks as well. Just found this right now -- and it reminds me of another indicator pointing to X itself: Often when returning to my machine and unlocking the screen, I found something doing heavvy work on my CPU. Checking with top, it always turned out to be /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none. So after this long explanation, finally my questions: What could be the possible causes? How can I better identify involved processes/applications? What steps could be taken to avoid this behaviour -- short from rebooting the machine all X days? I was running 8.04 (Hardy) for about 5 years on my old machine, never having experienced the like (always more than 100 days uptime, before rebooting for e.g. kernel updates). This now is a complete new machine with a fresh install of 8.04. In case it matters, some specs: AMD A4-3400 APU with Radeon(tm) HD Graphics, using the open-source ati/radeon driver (so no fglrx installed), 8GB RAM, WDC WD1002FAEX-0 hdd (1TB), Asus F1A75-V Evo mainboard. Ubuntu 12.04 64-bit with KDE4/Plasma. Apps usually open more or less permanently include Evolution, Firefox, konsole (with Midnight Commander running inside, about 4 tabs), and LibreOffice -- plus occasionally Calibre, Gimp and Moneyplex (banking software I'm already using for almost 20 years now, in a version which did fine on Hardy).

    Read the article

  • How to Convert Videos to 3GP for Mobile Phones

    - by DigitalGeekery
    Would you like to play videos on your phone, but the device only supports 3GP files? We’ll show you how to convert popular video files into 3GP mobile phone video format with Pazera Free Video to 3GP Converter. Download the Pazera Free Video to 3GP Converter (Download link below). It will allow you to convert popular video files (AVI, MPEG, MP4, FLV, MKV, and MOV) to work on your mobile phone. There is no installation to run. You’ll just need to unzip the download folder and double-click the videoto3gp.exe file to run the application. To add video files to the queue, click on the Add files button. Browse for your file, and click Open.   Your video will be added to the Queue. You can add multiple files to the queue and convert them all at one time. The converter comes with several pre-configured profiles for conversion settings. To load a profile, select one from the Profile drop down list and then click the Load button. The settings in the panels at the bottom of the application will be automatically updated.   If you are a more advanced user, the options on the lower panels allow for adjusting settings to your liking. You can choose between 3GP and 3G2 (for some older phones), H.263, MPEG-4, and XviD video codecs, AAC or AMR-NB audio codecs, as well as a variety of bitrates, resolutions, etc.  By default, the converted file will be output to the same location as the input directory. You can change it by clicking the text box input radio button and browsing for a different folder. Click Convert to start the conversion process. A conversion output box will open and display the progress. When finished, click Close.   Now you’re ready to load the video onto your phone and enjoy.     Conclusion Pazera Free Video to 3GP Converter is not exactly the ultimate video conversion tool, but it is quick and simple enough for the average user to convert most video formats to 3GP. Plus, it’s portable. You can copy the folder to a USB drive and take it with you. Do you have some 3GP video files you’d like to convert to more common formats? Check out our earlier article on how to convert 3GP to AVI and MPEG for free. Link Download Pazera Free Video to 3GP Converter Similar Articles Productive Geek Tips Convert .3GP and .3G2 Files to AVI / MPEG for FreeExtract Audio from a Video File with Pazera Free Audio ExtractorConvert PDF Files to Word Documents and Other FormatsConvert YouTube Videos to MP3 with YouTube DownloaderFriday Fun: Watch HD Video Content with Meevid TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

    Read the article

  • Converting a PV vm back into an HVM vm

    - by wim.coekaerts
    I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

    Read the article

  • Converting a PV vm back into an HVM vm

    - by wim.coekaerts
    I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

    Read the article

  • Very slow KVM in Ubuntu 12.04

    - by Guy Fawkes
    I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit windows or other application using the libvirt API. --> <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

    Read the article

  • As a person getting into mobile development, what's the best mobile platform in terms of profitability? [closed]

    - by Kyle Loman
    I realize this question can range very far so would love to hear any and all opinions on this. However, I'll be honest and say that I have been thinking of this in terms of most profitable. I know how this may sound either way but this is one of my main sticking points. I realize that I'm not guaranteed a single cent and success is never guaranteed but I'm going into this with the thought of making something out of it both financially and also for my own interest. I know that iOS gets a lot of attention on this front but Android commands a lot more market share. However, I know there are drawbacks to Android too, whether it's in the actual development process and programming (though I've heard conflicting reports on this, such as how easy/difficult it is for to address screen res in different devices) or the app ecosystem being flooded. But iOS's app ecosystem has been described as too saturated and harder to compete in for that reason. Since Windows Phone has fewer apps than both of those two, that might be the best place to start in order to be closer to the ground floor of the store and be noticed more? Less saturation = better chances of sales or differentiating? Something like the gold rush during the first years of the iOS App Store (not exactly but at least in concept)? Would it be that despite fewer users on the platform, there's more exposure due to less competition so that may translate to better success at sales? Plus, I know MS is in it for the long haul so I'm not too fearful of something like WebOS going away. Obviously RIM isn't very popular nowadays but I read a recent article that says Blackberry actually has the apps that make the most money, any thoughts on that: http://gigaom.com/mobile/which-mobile-oss-apps-make-most-money-surprise-its-blackberry/ Again, this is all I've heard or known about so if there's anything to add or correct here, please do. In addition, this has actually affected my next personal phone upgrade. I'm eligible for a carrier discount now and I've had my eye on the iPhone 5. However, the Lumia 920 is the one I'm holding out for and I'm open to trying an Android but I'm not sure I can wait that long for any new Nexus or even the Razr HD. Even the new Lumia in November is making me antsy, I'm so close to just getting an iPhone 5. But when I say this has affected my phone choice, I'd want to be able to carry the apps I write with me so that I'm able to pull my phone out to show people without having to carry around a second device to do so. So that's why I'd like to make my personal phone match the main platform I'm developing for. Of course, I will likely expand to other platforms if I gain any decent success but the one I target now would serve well as my personal phone I carry around so that I can use it as a marketing tool, in a sense, showing people my apps if the opportunity presents itself. So what's the best mobile platform to choose, and especially in regards to most lucrative? As said previously, this would influence my personal phone choice greatly. Thanks in advance and I hope this isn't taken the wrong way - I understand there are trade-offs and other factors that may balance this out but making some revenue is key among that. For some background, I have done software development and know programming language concepts so I'm not entirely new to it and I do get the notion of being familiar with these things so that I can translate this skill among a variety of languages but I'm currently just having difficulty choosing my first main mobile platform based on the criteria I've outlined above.

    Read the article

  • Sd card bigger than 2gb is not recognized in ubuntu 12.04

    - by dex1
    When I insert a card up to 2gb it is immediately seen by the system but if try it with bigger one it's not seen. I presume the issue is not due to the card reader itself as it reads all cards under windows 7 but due to linux driver. I could see some people having similar issues but no solution. Any help appreciated. GParted doesnt see cards bigger than 2gb. After insertion small card ubuntu@ubuntu:~$ dmesg [10169.384481] mmc0: new SD card at address a95c [10169.384870] mmcblk0: mmc0:a95c SD016 14.0 MiB [10169.386715] mmcblk0: p1 everything worked fine then I removed the small one and put 8gb, waited for 2min [10295.736422] mmc0: card a95c removed [10362.448383] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10372.480076] mmc0: Timeout waiting for hardware interrupt. [10382.496146] mmc0: Timeout waiting for hardware interrupt. [10392.512149] mmc0: Timeout waiting for hardware interrupt. [10402.528145] mmc0: Timeout waiting for hardware interrupt. [10402.529267] mmc0: error -110 whilst initialising SD card [10402.748807] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10412.768063] mmc0: Timeout waiting for hardware interrupt. [10422.784051] mmc0: Timeout waiting for hardware interrupt. [10432.800076] mmc0: Timeout waiting for hardware interrupt. [10442.816067] mmc0: Timeout waiting for hardware interrupt. [10442.817165] mmc0: error -110 whilst initialising SD card [10443.040805] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10453.056145] mmc0: Timeout waiting for hardware interrupt. [10463.072139] mmc0: Timeout waiting for hardware interrupt. [10473.088050] mmc0: Timeout waiting for hardware interrupt. [10483.104046] mmc0: Timeout waiting for hardware interrupt. [10483.104107] mmc0: error -110 whilst initialising SD card [10483.328960] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10493.344144] mmc0: Timeout waiting for hardware interrupt. ubuntu@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller (rev 16) 0a:01.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 0a:01.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 0a:01.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) Same cards, same machine (same reader) only different OS(win7) work flawlessly. Some interesting reading I came across but is Chinese for me http://www.mail-archive.com/[email protected]/msg14598.html and another bit http://article.gmane.org/gmane.linux.kernel.mmc/11973/match=sd+card+not+recognized

    Read the article

  • New Oracle BI Mobile Demonstration and SampleApp V305 on OTN

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 There is a new version of the Oracle BI Mobile HD app for iPhones and iPad. So download / update your App now. Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Then we have also changed the public server for hosting the Oracle BI Mobile Demonstration. This server image is based on the standard OBIEE 11.1.1.7 Sample Application (V305) which you can also download as a VirtualBox Image (this is a turnkey virtual environment with full SampleAppV305 preconfigured) from OTN here.   When your App is on your iPad, go into the “Settings” and “Add Server” to fill in the host location and access details as shown below: · Host = slc02ojq.oracle.com · Port = 7780 · Username = Prodney · Password = Admin123 · Note: SSL and SSO = OFF This same SampleApp V305 Demonstration server can also be accessed from your PC browser @ http://slc02ojq.oracle.com:7780/analytics. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

    Read the article

  • Best approach to depth streaming via existing codec

    - by Kevin
    I'm working on a development system (and game) intended for games set mostly in static third-person views. We produce our scenery by CG and photographic techniques. Our background art is rendered off-line by a production-grade renderer. To allow the runtime imagery to properly interact with the background art, I wrote a program to convert from depth output by Mental Ray into a texture, and a pixel shader to draw a quad such that the Z data comes from the texture. This technique is working out very well, but now we've decided that some of the camera angle changes between scenes should be animated. The animation itself is straightforward to produce from our CG models. We intend to encode it to some HD video codec such as H.264. The problem is that in order to maintain our runtime imagery on the screen, the depth buffer will need to be loaded for each video frame. Due to the bandwidth, the video's depth data will need to be compressed efficiently. I've looked into methods for performing temporal compression of depth info and found an interesting research paper here: http://web4.cs.ucl.ac.uk/staff/j.kautz/publications/depth-streaming.pdf The method establishes a mapping between 16-bit depth values and YCbCr values. The mapping is tuned to the properties of existing video codecs in order to maximize precision of the decoded depths after the YCbCr has undergone video compression. It allows an existing, unmodified video codec to be used on the backend. I'm looking at how to pull this off with the least possible work. (This design change was unplanned.) Our game engine itself is native C++, presently for Win32 and DirectX, although we've worked hard to keep platform dependence segregated because we intend other ports. We don't have motion video facilities in the engine yet but will ultimately need that anyway for cinematics. I was planning on using some off-the-shelf motion video solution we can plug into our engine, and haven't chosen one yet. This new added requirement makes selecting one harder since, among other things, we'll now need to bypass colourspace conversion on one of the streams, and also will need to be playing two streams simultaneously in lockstep, on top of in some cases audio on one of them (for the cinematics). I'm also wondering if it's possible (or even useful) to do the conversion from YCbCr to depth in a pixel shader, or if it's better to just do it in CPU and separately load the resulting depth values into a locked tex. The conversion unfortunately does involve branching logic per-pixel. (There are more naive mappings that don't need branching, but they produce inferior results.) It could be reduced to a table lookup but the table would be 32MB. Programming is second-nature to me but I'm not that experienced with pix shaders and have zero knowledge of off-the-shelf video solutions. I'd therefore be interested in advice from others who may have dealt more with depth streaming, pixel shaders, and/or off-the-shelf codecs, regarding how feasible the proposed application is and what off-the-shelf video systems out there would best get along with this usage case.

    Read the article

  • My LAN USB NIC is not working in ubuntu 11.10?

    - by Gaurav_Java
    Today i start my system its seems that my LAN port is not working . so i buy one USB to LAN adapter and i plug in ubuntu system its doen't connect automatically .when i check result lsusb its shows me that there is one DM9601 Ethernet adapter is connected when i click on network information in panel its shows me that there is something " wired NEtwork (Broadcom NetLink BCM5784M gigabit Ethernet PCIe) I think want some driver for that .i don't have any idea how it can be used ? here output of sudo lspci -nn *00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) 04:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]* sudo lshw -class network *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:1f:16:9a:56:98 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:f4500000-f450ffff *-network DISABLED description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fa:09:02:00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-17-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f4600000-f4601fff *-network description: Ethernet interface physical id: 4 logical name: eth1 serial: 00:60:6e:00:f1:7d size: 100Mbit/s capacity: 100Mbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=dm9601 driverversion=22-Aug-2005 duplex=full firmware=Davicom DM9601 USB Ethernet ip=192.168.1.34 link=yes multicast=yes port=MII speed=100Mbit/s I am using Wimax internet connection which i have to connect from browser . at that time my system is not showing that i am connected to any wired connection. but when i connect internet from other system after getting conneted to internet . when i plug again my USB LAN then its shows that you are conneted to wired connetion. here is screenshot for conneting wimax from browser after connecting to internet network connection shows

    Read the article

  • trying to setup wireless

    - by JohnMerlino
    I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

    Read the article

  • Extreme Makeover, Phone Edition: Comcasts xfinity

    Mobile Makeover For many companies the first foray into Windows Phone 7 (WP7) may be in porting their existing mobile apps. It is tempting to simply transfer existing functionality, avoiding the additional design costs. Readdressing business needs and taking advantage of the WP7 platform can reduce cost and is essential to a successful re-launch. To better understand the advantage of new development lets examine a conceptual upgrade of Comcasts existing mobile app. Before Comcast has a great mobile app that provides several key features. The ability to browse the lineup using a guide, a client for Comcast email accounts, On Demand gallery, and much more. We will leverage these and build on them using some of the incredible WP7 features.   After With the proliferation of DVRs (Digital Video Recorders) and a variety of media devices (TV, PC, Mobile) content providers are challenged to find creative ways to build their brands. Every client touch point must provide both value added services as well as opportunities for marketing and up-sale; WP7 makes it easy to focus on those opportunities. The new app is an excellent vehicle for presenting Comcasts newly rebranded TV, Voice, and Internet services. These services now fly under the banner of xfinity and have been expanded to provide the best experience for Comcast customers. The Windows Phone 7 app will increase the surface area of this service revolution.   The home menu is simplified and highlights Comcasts Triple Play: Voice, TV, and Internet. The inbox has been replaced with a messages view, and message management is handled by a WP7 hub. The hub presents emails, tweets, and IMs from Comcast and other viewers the user follows on Twitter.  The popular view orders shows based on the users viewing history and current cable package. The first show Glee is both popular and participating in a conceptual co-marketing effort, so it receives prime positioning. The second spot goes to a hit show on a premium channel, in this example HBOs The Pacific, encouraging viewers to upgrade for this premium content. The remaining spots are ordered based on viewing history and popularity. Tapping the play button moves the user to the theatre where they can watch previews or full episodes streaming from Fancast. Tapping an extra presents the user with show details as well as interactive content that may be included as part of co-marketing efforts. Co-Marketing with Dynamic Content The success of Comcasts services are tied to the success of the networks and shows it purveys, making co-marketing efforts essential. In this concept FOX is co-marketing its popular show Glee. A customized panorama is updated with the latest gleeks tweets, streaming HD episodes, and extras featuring photos and video of the cast. If WP7 apps can be dynamically extended with web hosted .xap files, including sandboxed partner experiences would enable interactive features such as the Gleek Peek, in which a viewer can select a character from a panorama to view the actors profile. This dynamic inline experience has a tailored appeal to aspiring creatives and is technically possible with Windows Phone 7.   Summary The conceptual Comcast mobile app for Windows Phone 7 highlights just a few of the incredible experiences and business opportunities that can be unlocked with this latest mobile solution. It is critical that organizations recognize and take full advantage of these new capabilities. Simply porting existing mobile applications does not leverage these powerful tools; re-examining existing applications and upgrading them to Windows Phone 7 will prove essential to the continued growth and success of your brand.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Cannot get ATI Drivers installed

    - by bittoast67
    I am trying to install the Catalyst driver. The best I can get is a strange resolution problem and firefox acts all wonkt. The worst I have gotten is low graphics mode in which I just reinstall Ubuntu. I have a HP Pavilion Dv7 laptop. With Radeon 3200 HD. I plan to try again with a fresh install of Ubuntu 12.4.3 as I have heard its the most compatible. This is what I have done: I have tried just the easy way of going to synaptic and installing the drivers that way. the fglrx package (not the fglrx update). And if memory serves I think that boots me into low graphics mode. So, fresh install of Ubuntu and tried again. I have done everything a couple times from this site (http://wiki.cchtml.com/index.php/Ubuntu_Precise_Installation_Guide) following every instruction to a T. That gets me something, such as a lowered fan speed and a much cooler computer, but I also lose most of my resolution. And displays says its the best resolution I can get. I also have a very screwy firefox. Using this method I can see AMD Catalyst Control Center in my dash (two of them really one administrator and one not) but when I try to open it it says no amd driver detected. So again, ubuntu reinstall. I have tried the GUI method from the Legacy driver I got from AMD's site. It runs through smoothly and at the very end after I exit the installer it gives me an error. I have also tried various other methods using terminal, as well as various different drivers (the one from the amd's site and the one suggested in the above link for my graphics card) both to no avail. When I try the method in the link on number 2, and I get the super low res and screwy fire fox. I type in, fglrxinfo ,and get a badrequest error. I have yet to type in fglrxinfo and get anything like what I am supposed to. UPDATE: I am now currently reinstalling Ubuntu 12.4. I tried the above mentioned link - thank you very much!- just to see on the previously failed driver attempt by following the purge commands. And to no avail when typing fglrxinfo I still get the badrequest thing. I will update again after a try with a true fresh install. Thanks again!! UPDATE: Alright everyone. Still no go. I have done everything word per word in the provided tutorial. I have rebooted my computer again to a fucked up resolution and this is what I get when typing fglrxinfo: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 153 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 I would like to add that when installing this file: fglrx_8.970-0ubuntu1_amd64.deb I got this: Building initial module for 3.8.0-29-generic Error! Bad return status for module build on kernel: 3.8.0-29-generic (x86_64) Consult /var/lib/dkms/fglrx/8.970/build/make.log for more information. update-initramfs: deferring update (trigger activated) Processing triggers for ureadahead ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-29-generic Processing triggers for libc-bin ... ldconfig deferred processing now taking place Any ideas? Anyone? I cant for the life of me figure out what I am doing wrong.

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >