Search Results

Search found 75611 results on 3025 pages for 'copy file'.

Page 858/3025 | < Previous Page | 854 855 856 857 858 859 860 861 862 863 864 865  | Next Page >

  • My server's been hacked EMERGENCY

    - by Grant unwin
    I'm on my way into work at 9.30 p.m. on a Sunday because our server has been compromised somehow and was resulting in a DOS attack on our provider. The servers access to the Internet has been shut down which means over 5-600 of our clients sites are now down. Now this could be an FTP hack, or some weakness in code somewhere. I'm not sure till I get there. How can I track this down quickly? We're in for a whole lot of litigation if I don't get the server back up ASAP. Any help is appreciated. UPDATE Thanks to everyone for your help. Luckily I WASN'T the only person responsible for this server, just the nearest. We managed to resolve this problem, although it may not apply to many others in a different situation. I'll detail what we did. We unplugged the server from the net. It was performing (attempting to perform) a Denial Of Service attack on another server in Indonesia, and the guilty party was also based there. We firstly tried to identify where on the server this was coming from, considering we have over 500 sites on the server, we expected to be moonlighting for some time. However, with SSH access still, we ran a command to find all files edited or created in the time the attacks started. Luckily, the offending file was created over the winter holidays which meant that not many other files were created on the server at that time. We were then able to identify the offending file which was inside the uploaded images folder within a ZenCart website. After a short cigarette break we concluded that, due to the files location, it must have been uploaded via a file upload facility that was inadequetly secured. After some googling, we found that there was a security vulnerability that allowed files to be uploaded, within the ZenCart admin panel, for a picture for a record company. (The section that it never really even used), posting this form just uploaded any file, it did not check the extension of the file, and didn't even check to see if the user was logged in. This meant that any files could be uploaded, including a PHP file for the attack. We secured the vulnerability with ZenCart on the infected site, and removed the offending files. The job was done, and I was home for 2 a.m. The Moral - Always apply security patches for ZenCart, or any other CMS system for that matter. As when security updates are released, the whole world is made aware of the vulnerability. - Always do backups, and backup your backups. - Employ or arrange for someone that will be there in times like these. To prevent anyone from relying on a panicy post on Server Fault. Happy servering!

    Read the article

  • Is there any way to prevent a Mac from creating dot underscore files?

    - by SoaperGEM
    At work we're letting one of our very tech savvy clients actually help out a little with a few development projects specific to him. However, he uses his own personal Macbook, and as he edits files on our (Windows) networks, his Macbook always creates a bunch of unnecessary meta files that we end up deleting later. For instance, it creates a file called .DS_Store in any directory he opens, as well as "dot underscore" files for each file he edits. So for instance, if he's editing a file called "Main.php", his Macbook will create another file called "._Main.php". I know there are ways to prevent creation of .DS_Store files, but none about how to prevent creation of these hidden files prefixed with dot underscore. Is there any way to turn that off on Macs? Any way to prevent it from creating those files in the first place?

    Read the article

  • Fixing a corrupted Windows Server 2003 server

    - by Keith
    I have a Windows Server 2003 server that is being mainly used for some reporting done in SQL Server. Recently Windows has started complaining about being corrupted, we are getting an NTFS error 55: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume1. The server is RAID 5 and I did have a disk die however the RAID never went degraded since I have a hotspare. I replaced the hot spare and I'm still having problems. When I run chkdsk I get tons of messages.. some are: Deleting corrupted attribute record (128, "") from file record segment 194746 Those go on for a while. Then it deletes some orphan files. Then it does Correcting error in index $I30 for file 132426 And that goes on for a while. Then I get tons of Recovering orphaned file RE1AB6~1.LOG into directory file 534959 I have seen a lot of errors relating to the SQL Server reporting services. What are my options at this point? I would prefer to fix the issue instead of building a new server but I don't know if I can at this point.

    Read the article

  • How to get the summarized sizes of folders and their subfolders?

    - by Kau-Boy
    Let's say I want to get the size of each folder of a linux file system. When I use ls -la I don't really get the summarized size of the folders. If I use df I get the size of each mounted file system but that also doesn't help me. And with du I get the size of each subfolder and the summary of the whole file system. But I want to have only the summarized size of each folder within the ROOT folder of the file system. Is there any command to achiev that?

    Read the article

  • Prevent Chrome from automatically opening downloaded PDF and Image files

    - by Phoenix
    When I download a PDF or image in Google Chrome on my Mac, is it possible to prevent Chrome from automatically opening it in my default application for that file type (e.g., Preview)? I notice that Chrome does not do this for other downloaded files such as audio and ZIP archives. I still want to be able to preview files in Chrome; I just want to prevent it from automatically launching my image/PDF viewer application after I download them. For example: I click on a link in an email to a PDF document or an image file. Chrome displays the contents in the browser. I press Cmd-S and save the file to my computer. When the download finishes, the file opens automatically in Preview.app. It's that last step that I would like to bypass.

    Read the article

  • Lots of files being used by blank web page. What are they?

    - by byronyasgur
    I am trying to optimise a website and I was using the network waterfall facility in Google Chrome. When I looked at the results there were lots of files which I didnt recognise. I first thought they might be something to do with Google Chrome itself, so I put a blank HTML file on my desktop and checked but there was nothing in the waterfall except the file itself. So I put a blank file on my server and I got the output below. What are all these files, are they all necessary, is this normal and do I need to be in any way concerned. My hosting provider has always been excellent in every regard that I'm aware of. My host is shared hosting, using cpanel and is based on a LAMP server. I also note that a couple of those file have problems but I have no idea how to fault find that or whether it's a concern. EDIT: I have cleared the cache so I don't think it's a browser cache issue.

    Read the article

  • Organize code in Chef: libraries, classes and resources

    - by ColOfAbRiX
    I am new to both Chef and Ruby and I am implementing some scripts to learn them. Now I am facing the problem of how to organize my code: I have created a class in the library directory and I have used a custom namespace to maintain order. This is a simplified example of my file: # ~/chef-repo/cookbooks/mytest/libraries/MyTools.rb module Chef::Recipe::EP class MyTools def self.print_something( text ) puts "This is my text: #{text}" end def self.copy_file( dir, file ) cookbook_file "#{dir}/#{file}" do source "#{dir}/#{file}" end end end end From my recipe I call both methods: # ~/chef-repo/cookbooks/mytest/recipes/default.rb EP::MyTools.print_something "Hello World!" EP::MyTools.copy_file "/etc", "passwd" print_something works fine, but with copy_file I get this error: undefined method `cookbook_file' for Chef::Recipe::EP::FileTools:Class It's clear to me that I don't know how to create libraries in Chef or I don't know some basic assumptions. Can anyone help me, please? I am looking for a solution of this problem (organize my code, libraries, use resources in classes) or, better, a good Chef documentation as I find the documentation very deficient in clarity and disorganized so that research through it is a pain.

    Read the article

  • Fixed ruby/mysql connection with new libmysql.dll, and broke Apache in the process

    - by jmtoporek
    Ok so bit of background - all my development has been on a local Windows 7 machine. I had Apache with PHP/MySQL running with no issues. Been using ruby (1.9.3 and latest rails release 3.2.9) with built in webrick server, but had a devil of a time connecting to mysql. Did some research, updated my libmysql.dll file in c:/ruby/bin and it worked! Very happy... except now Apache stopped working. In my attempt to resolve the issue I found an older copy of libmysql.dll, renamed the new file, copied the old file back to c:ruby/bin and apache works, ruby does not. So I can take this ass backwards approach but obviously this seems pretty stupid. I was surprised that Apache was using the dll file in ruby/bin folder. I presume this is related to path variables perhaps? I guess I was hoping someone could direct me as to how I can use one dll file for apache and another for ruby. Or if you have some other smarter approach - I've smart enough to follow directions to install apache from scratch and enable php on windows as well as ubuntu, but I'm not much of a sys admin, just a semi competent web developer.

    Read the article

  • Where are Wireless Profiles stored in Ubuntu

    - by LonnieBest
    Where does Ubuntu store profiles that allow it to remember the credentials to private wireless networks that it has previously authenticate to and used? I just replaced my Uncle's hard drive with a new one and installed Ubuntu 10.04 on it (he had Ubuntu 9.10 on his old hard drive. He is at my house right now, and I want him to be able to access his private wireless network when he gets home. Usually, when I upgrade Ubuntu, I have his /home directory on another partition, so his wireless profile to his own network persists. However, right now, I'm trying to figure out which .folder I need to copy from his /home/user folder on the old hard drive, to the new hard drive, so that he will be able to have wireless Internet when he gets home. Does anyone know with certainty, exactly which folder I need to copy to the new hard drive to achieve this?

    Read the article

  • how to stop powershell mangling command line options for program executed from shell?

    - by kem
    From the powershell prompt, when I try to run a program and feed it a command line option, powershell ends up mangling the option. Why does this happen? Is there any way to stop it besides enclosing the option in quotes? For example, from the powershell prompt: PS Microsoft.PowerShell.Core\FileSystem::\\mach\share .\myprog.exe -file=input.txt myprog.exe ends up getting two arguments: 1) -file=input 2) .txt I need to run it like: .\myprog.exe "-file=input.txt" or .\myprog.exe '-file=input.txt' to force it to be one argument. No other shell does this.

    Read the article

  • Is it possible to continue torrent downloads from other client

    - by Nrew
    I have downloaded a torrent file but I downloaded it using bitlord. And because bit lord doesnt have the ability like initial seeding. I decided to use utorrent. Ive already tried to continue it. What I did was to: Opened the original torrent file in utorrent. Target where the incomplete bitlord incomplete file was. But it seems that utorrent isn't detecting the file and it makes another copy of it and start to download from the beginning. Im at about 80 percent and there are only 18 seeds but there's 17 leech. And my connection is slow so I really have to initial seed. Other details: I've reformatted the original machine where I downloaded it. Also didn't copy the original application.

    Read the article

  • Get Matrox Millenium video card working in Ubuntu 9.10

    - by wcoenen
    I have installed Ubuntu 9.10 on an old PC and it is mostly working, except for some heavy drawing defects that show up whenever I start dragging a window or scrolling inside a window or menu. It looks like the video driver copies the rectangle being moved to the wrong location. I have taken a look in /var/log/Xorg.0.log and the following line shows the detected video card: (--) PCI:*(0:0:8:0) 102b:0519:0000:0000 Matrox Graphics, Inc. MGA 2064W [Millennium] rev 1, Mem@ 0xf9800000/16384, 0xfb000000/8388608, BIOS @0x????????/65536 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default mga Device 0" Driver "mga" EndSection How do I fix the drawing defects? It turned out that the 24 bit color depth (automatically selected by ubuntu 9.10) was the problem; apparantly the mga driver doesn't handle this well for cards with little memory. I took the following steps to resolve the issue (you can skip the first three steps if you already have a semi-working xorg.conf file): Reboot ubuntu in recovery mode, to get a root console without X running. Run Xorg -configure to generate a xorg.conf.new file Copy the file to /etc/X11/xorg.conf with cp xorg.conf.new /etc/X11/xorg.conf (assuming it didn't exist yet; that's why I generated it) Open the new config file with sudo nano /etc/X11/xorg.conf and make sure the screen section is configured for 16 bit color depth like this: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection EndSection I can't guarantee those were the only important changes I made - I tried a few things in my attempts to create a valid xorg.conf file. But I'm pretty sure that the screen section was the important part.

    Read the article

  • Multiple [Stand-alone] zip files creation?

    - by im_chc
    How can I automatically zip a group of files into multiple zip files (say, 2mb in size for each file), and that each zip file is a stand-alone zip file? (i.e. not mult-volume zip files, that you can't lost any one of the files, otherwise you can't unzip) Is there any tools available to do so? Actually I just need to group the files into many groups, 2mb each etc, zipped or not zipped doesn't matter thx!

    Read the article

  • Powershell Set-Acl fails

    - by Ulrich
    While working on a little backup script I try to change the ACL of a file using Set-Acl in Powershell 1 on Vista and always get the following error message: Set-Acl : The security identifier is not allowed to be the owner of this object. This error persists even if I go a minimal script: $acl = Get-Acl $sourcepath$file $acl |format-list Set-Acl -path $sourcepath$file -AclObject $acl Does anyone know the reason for this error? Obviously I'm not changing the ownership of the file... BTW: What I ultimately want to achieve is to reduce all access rights to ReadAndExecute. Is there maybe an easier way of doing this in Powershell? Thanks for your help! Ulrich

    Read the article

  • Looking for a way to diff many server's filesystem

    - by Itai Ganot
    There's a motivation in my office to make sure that all file systems on all servers in the production environment (It's a Windows environment) are identical until the last file and i'm looking for a program/tool which can help me achieve this goal. What i actually look for is a tool that will allow me to diff server's file systems by connecting them remotely (as they are spreaded around the world). Anyone knows a tool which allows it?

    Read the article

  • Why are some web clients requesting a page named "cache"?

    - by Toto
    We see errors like this in the apache error log: [Thu May 17 14:32:35 2012] [error] [client 192.168.1.1] File does not exist: /home/www-data/mywebsite.com/r/cache, referer: http://www.mywebsite.com/r/1010 It is strange because: There is no reference in the code/url about a folder/file "cache". The folder/file "cache" does not exist The client is randomly trying to access a "cache" folder everywhere on the website. It is always trying to access the folder/file "cache" following this pattern: Pattern: /level1/.../levelwhatever/filename (referer) /level1/.../levelwhatever/cache We run a LAMP (Debian stable: PHP 5.3.3-7+squeeze9. We also use APC 3.1.3p1). We use Google Analytics and AdSense. We do not know how to reproduce the problem. Note: I replaced the user's IP in the code for privacy.

    Read the article

  • Can't change read only folder in windows 7

    - by James Drinkard
    I'm trying to run a Spring MVC 2.5 tutorial and when I run the ant script for a deploy, I get this error: deploy: [copy] Copying 2 files to C:\apache-tomcat-7.0.8\webapps\c:\projects\workspace\springapp BUILD FAILED C:\projects\workspace\springapp\build.xml:46: Failed to copy C:\projects\workspace\springapp\war\WEB-INF\web.xml to C:\apache-tomcat-7.0.8\webapps\c:\projects\workspace\springapp\WEB-INF\web.xml due to failed to create the parent directory for C:\apache-tomcat-7.0.8\webapps\c:\projects\workspace\springapp\WEB-INF\web.xml After reviewing the directory: springapp I saw the properties as read-only. No problem I thought as I'm logging in as administrator. However, changing the uac settings, going to a command prompt as admin and then trying to change the properties of the folder with attrib, making me the owner of the folder, changing the security settings etc... did nothing. I can't seem to change this folder to anything. So my question is, how do I change the settings on that folder so ANT can make changes to that folder?

    Read the article

  • Would shell command join cause out of memory?

    - by Hancy
    I have two file to join. FILE 1: a A1 a A2 a A3 ... c C1 c C2 ... FILE 2: a feature1_of_a a feature2_of_a ... a featureN_of_a ... ... c feature1_of_c c feature2_of_c ... after join, i could get File like this: A1 feature1_of_a A2 feature1_of_a A3 feature1_of_a A1 feature2_of_a A2 feature2_of_a A3 feature2_of_a ... A1 featureN_of_a A2 featureN_of_a A3 featureN_of_a ... In order to do that: i wrote shell command join -11 -21 -o1.2,2.2 file1 file2. But the problem is: number N might be huge. So if join read all feautre of a into memory at once, memory might not be enough. I don't know how join is implemented. WQould the momery become a problem? If so, is there any way to get what I want?

    Read the article

  • Is it possible to open a sqlite database from within microsoft sql management studio?

    - by Brian T Hannan
    Is there a way to open a .db file (sqlite database file) from within microsoft sql management studio? Right now we have a process that will grab the data from a microsoft sql server database and put it into a sqlite database file that will be used by an application later on. Is there a way to open the sqlite database file so that it can be compared to the data inside the sql server database ... using only one sql query? Is there a plug-in for microsoft sql management studio? Or maybe there is another way to do this same task using only one query. Right now we have to write two scripts ... one for sql server database and one for sqlite database ... then take the output from each in the same format and put them each in their own OpenOffice spreadsheet file. Finally, we compare the two files to see if there are any differences. Perhaps there's a better way to do this. P.S. Alot of applications use sqlite internally: Well-Known Users Of SQLite

    Read the article

  • Advice on off-site backup of Hyper-V Failover Cluster

    - by Paul McCowat
    We are currently setting up a Server 2008 R2 which will be off-site over a leased line with VPN. At the main site is 2 x Hyper-V hosts in a failover cluster with PowerVault M3000i iSCSI SAN. We are using BackupAssist for local backups and each host backups up itself and it's guests nightly creating a 500GB backup each which is copied to a 2TB rotated NAS drive. Files and SQL DB's are also backed up / log shipped etc. Looking for the best way to backup the Hyper-V VM's and copy them off-site so that the OS's are only a month old and the data is a day old. The main backups are too large to transfer between backups so options discussed so far are: Take rotating individual backups of the VM's each day and copy over, Day 1 SQL VM, Day 2 Exchange VM etc, would require more storage. Look in to Hyper-V snapshots, however don't believe these are supported in clustering. 3rd party replication tools

    Read the article

  • Percona system tables corrupted.

    - by Anand Jeyahar
    I am having problems setting up mysql replication with a percona as server. accidentally, took a full dump from mysql and restored it on percona and then started,the replication. now when i stop slave and start slave, i am getting the error "[ERROR] Failed to open the relay log './s5-bin.000003' (relay_log_pos 2029993) 110103 9:15:59 [ERROR] Could not find target log during relay log initialization " But show local variables shows the relay_log variable as set in the cnf file.. But the relay-log variable is set to slave-relay-bin alright. I am able to start mysql as a service. But mysqld_safe fails with error "110103 9:19:39 [ERROR] /usr/sbin/mysqld: Can't create/write to file '/var/run/mysqld/mysqld.pid' (Errcode: 2) 110103 9:19:39 [ERROR] Can't start server: can't create PID file: No such file or directory " Am now lost as to what is the problem.

    Read the article

  • nginx rewrite rule to convert URL segments to query string parameters

    - by Nick
    I'm setting up an nginx server for the first time, and having some trouble getting the rewrite rules right for nginx. The Apache rules we used were: See if it's a real file or directory, if so, serve it, then send all requests for / to Director.php DirectoryIndex Director.php If the URL has one segment, pass it as rt RewriteRule ^/([a-zA-Z0-9\-\_]+)/$ /Director.php?rt=$1 [L,QSA] If the URL has two segments, pass it as rt and action RewriteRule ^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$ /Director.php?rt=$1&action=$2 [L,QSA] My nginx config file looks like: server { ... location / { try_files $uri $uri/ /index.php; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } How do I get the URL segments into Query String Parameters like in the Apache rules above? UPDATE 1 Trying Pothi's approach: # serve static files directly location ~* ^.+\.(jpg|jpeg|gif|css|png|js|ico|html)$ { access_log off; expires 30d; } location / { try_files $uri $uri/ /Director.php; rewrite "^/([a-zA-Z0-9\-\_]+)/$" "/Director.php?rt=$1" last; rewrite "^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$" "/Director.php?rt=$1&action=$2" last; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } This produces the output No input file specified. on every request. I'm not clear on if the .php location gets triggered (and subsequently passed to php) when a rewrite in any block indicates a .php file or not. UPDATE 2 I'm still confused on how to setup these location blocks and pass the parameters. location /([a-zA-Z0-9\-\_]+)/ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME ${document_root}Director.php?rt=$1{$args}; include fastcgi_params; } UPDATE 3 It looks like the root directive was missing, which caused the No input file specified. message. Now that this is fixed, I get the index file as if the URL were / on every request regardless of the number of URL segments. It appears that my location regular expression is being ignored. My current config is: # This location is ignored: location /([a-zA-Z0-9\-\_]+)/ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index Director.php; set $args $query_string&rt=$1; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location / { try_files $uri $uri/ /Director.php; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index Director.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }

    Read the article

  • Accessing a storage-side snapshot of a cluster-shared volume

    - by syneticon-dj
    From time to time I am in the situation where I need to get data back from storage-side snapshots of cluster shared volumes. I suppose I just never figured out a way to do it right, so I always needed to: expose the shadow copy as a separate LUN offline the original CSV in the cluster un-expose the LUN carrying the original CSV make sure my cluster nodes have detected the new LUN and no longer list the original one add the volume to the list of cluster volumes, promote it to be a CSV copy off the data I need undo steps 5. - 1. to revert to the original configuration This is quite tedious and requires downtime for the original volume. Is there a better way to do this without involving a separate host outside of the cluster?

    Read the article

  • How do I mount a sparse disk image permanently?

    - by Mike
    On Mac OS X 10.6.7, when I mount a sparse disk image (either by double-clicking it or using hdid from the command line), the image: Appears on my desktop Needs to be re-mounted every time I log in I'd like to set up the equivalent of an /etc/fstab which will mount the image when the system boots, and make it permanent - so I don't have to worry if my symbolic links will resolve or not. Is this more trouble than it's worth on a Mac? I noticed that there is no /etc/fstab, and /etc/fstab.hd contains a dire warning: IGNORE THIS FILE. This file does nothing, contains no useful data, and might go away in future releases. Do not depend on this file or its contents. I tried sudo hdid -notremovable <image>, which seemed like half of what I wanted (according to man hdid), but it failed with an error: hdid: attach failed - no mountable file systems.

    Read the article

< Previous Page | 854 855 856 857 858 859 860 861 862 863 864 865  | Next Page >