Search Results

Search found 25181 results on 1008 pages for 'computer building'.

Page 86/1008 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

  • Computer loads BIOS, but won't load OS

    - by LEGEND383
    I have just purchased a brand new motherboard bundle, installed into the old case with the old PSU and the old HDD. I can get into the BIOS, but whenever I try to boot from the HDD, it just sits with the fans going, but nothing is displayed. The moniter works (tested with another machine), and I'd hope there are no problems with the motherboard, CPU or RAM because as I said I only brought them today. The only things I can think of are: The PSU's motherboard connector is a 20-pin, and the motherboard has a 24-pin connector (not a problem with the previous board) The OS is not supported (doesn't seem likly to me, but possible I guess) Here is my system configuration: Motherboard: ASUS F1A55-M le CPU: AMD APU A6 3500 HDD: 1Tb SATA RAM: 4Gb DDR3 OS: Ubuntu Satanic v666.9 PSU: Winpower ATX-400 (this thing is REALLY old) If anyone is able to offer a reason as to why this is not working, or a possible solution, it would be greatly appriciated.

    Read the article

  • Computer Software Needed

    - by captfrankie
    A friend started my website with Frontpage 2000 in Oct04. I used it until 09 and started to use Kompozer. I am starting to have difficulty updating my picture pages. Some pictures never show up or show up as X. I'm not sure what the problem is. I haven't been able to figure out how to upload files to Filezilla either. Is there a software program similar to Frontpage and Kompozer that will allow me to do weekly updates/addition to my picture pages without recreating the whole page? I dabbled with Web Builder 8-Easy WebEditor-Expression Web and Pagebreeze.

    Read the article

  • Event Log time when Computer Start up / boot up

    - by Param
    Client OS - Window XP Domain Controller:- Window server 2008 Standard R2 I had one Window XP system, i want to find out when the system has started or boot ( at what time and at which date ). I don't know which parameter / word should i search in Event Log. For finding out shutdown time, i simply find the word "Shutdown" in Event Log. Can you guide me which word should i find for finding Start up or boot time

    Read the article

  • Windows 7 computer apparently connected to working wireless network but can't access router page or internet

    - by Hemmer
    I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

    Read the article

  • How to diagnose computer freezing problem

    - by reinierpost
    I have a laptop (a Medion from Aldi) that tends to hang quite often - so often, in fact, that several attempts to install Windows XP or Ubuntu on it have all failed. However, I am able to boot and run Ubuntu as found on the standard Ubuntu 10.10 installation image. I have done this two times thus far. The first time everything was running smoothly, until at some point the GUI (i.e. X) became unresponsive. The cursor kept moving with the mouse, but menus would no longer show and clicking things no longer produced any response. So I switched to the consoles (Ctrl-F1, Ctrl-F2, etc., which in this setup automatically run shells. The shells were still responsive, and the cd command would still work, but any command that invoked an executable (e.g. /bin/ls or cd /bin; ./find caused the shell to hang up uninterruptibly. My hypothesis was that all attempts at disk access were hanging up, but I didn't actually try a command like echo /proc/$$ or while read line; do echo $line; done < /var/log/syslog to verify this. Another possibility is that an essential system library is cached in memory and somehow failing to function properly. The second time I left the system running overnight and it didn't hang itself spontaneously. I'm not sure I have the patience to just twiddle with the running system until the condition reappears, and I'm, not sure what to do once it does. Clearly we can rule out a software cause. It seems disk access related, but clearly it's not permanent hard disk failure because the system will reboot just fine. What kind of hardware problem might produce these symptoms? Can it be a memory problem?

    Read the article

  • 1 Computer Pulls Wrong DNS Every Morning

    - by bradenkeith
    One of my users takes his laptop home, connects to his internal network fine. He brings it in every morning and since Monday - every morning it pulls the wrong DNS every time. It pulls 1 DNS: 192.168.1.1 which is the router. The DNS are external IPs. I have several users that take their laptops home and connect to other networks - what could cause this anomaly? He's booting up when he comes in the office and a simple ipconfig /release /renew fixes the issue.

    Read the article

  • Computer won't stay powered up

    - by Android
    I have just tried to turn my PC on this morning and it won't stay powered up. It will come on as normal for about 5 seconds, not quite long enough for the monitor to wake up. Then it will power off. After about 2 seconds it will start again, it will continue like this until I pull out the plug. Plugging it in again doesn't restart the cycle although pressing the power button does. I have tried to clear the cmos but beyond that I have no ideas. It was working perfectly when I put it in hibernate last night. NOTE: I am using a Dell Optiplex 755 UPDATE 1: I took out the motherboard battery and it almost came on then it displays the message Error loading Operating System UPDATE 2: After taking out the custom video card, it says "No hard drive present"

    Read the article

  • I think my computer is eating my USB devices

    - by user1068446
    Hi so I think the USB ports on the front of my desktop PC are eating all the devices that are plugged in. (I've found with a couple of USB disks I put at the start of the year, were then unusable on any device after wards). If this is the case, what's likely to be the problem, and how do I fix it? What would a good, simple way to diagnose the problem be? I'm a bit scared to put any of my USB devices in, because that sounds expensive. (I'm thinking I might look out for some cheap old disks).

    Read the article

  • Where to get laptop replacement parts?

    - by wai
    I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

    Read the article

  • Where to get laptop replacement parts?

    - by wai
    I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

    Read the article

  • Custom built machine has much higher power consumption than expected

    - by foraidt
    I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

    Read the article

  • PostSharp causes error with .Net 4.0 when building

    - by Kev Hunter
    When trying to build a project which used PostSharp 1.5 on our Ci Server we get the following error; C:\Program Files\PostSharp 1.5\PostSharp-1.5.targets (261,5): error: Unhandled exception: PostSharp.CodeModel.BindingException: Cannot find the type 'System.Action`2' in assembly 'System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'. at PostSharp.CodeModel.AssemblyEnvelope.GetTypeDefinition(String typeName, BindingOptions bindingOptions) at PostSharp.CodeModel.TypeRefDeclaration.GetTypeDefinition(BindingOptions bindingOptions) at PostSharp.CodeModel.TypeSpecDeclaration.GetTypeDefinition(BindingOptions bindingOptions) at PostSharp.Extensibility.Tasks.IndexGenericInstancesTask.Execute() at PostSharp.Extensibility.Project.ExecutePhase(String phase) at PostSharp.Extensibility.Project.Execute() at PostSharp.Extensibility.PostSharpObject.ExecuteProjects() at PostSharp.Extensibility.PostSharpObject.InvokeProject(ProjectInvocation projectInvocation) at PostSharp.MSBuild.PostSharpRemoteTask.Execute(PostSharpTaskParameters parameters, TaskLoggingHelper log) It has previously worked on .net 3.5. What's the best way to fix this?

    Read the article

  • Error Building Project With NSXMLParserDelegate.

    - by fuzzygoat
    TurbineXMLParser.h #import <Foundation/Foundation.h> @interface TurbineXMLParser : NSObject <NSXMLParserDelegate> { ... TurbineXMLParser.m #import "TurbineXMLParser.h" I have just added a new class to my current project that I previously tested in a single file. When I try and build the project I get the error: error: cannot find protocol declaration for 'NSXMLParserDelegate' I did a bit of searching and tried adding the following ... TurbineXMLParser.h #import <Foundation/Foundation.h> @protocol NSXMLParserDelegate; @interface TurbineXMLParser : NSObject <NSXMLParserDelegate> { ... but still get the warning: warning: no definition of protocol 'NSXMLParserDelegate' is found any help would be much appreciated gary

    Read the article

  • Building Android NDK Toolchain for x86 Android on Windows via Cygwin

    - by grrussel
    The Android SDK includes the Android NDK, which in turn contains a customised GCC based tool chain for Android on ARM processors; The question is how to build the NDK tool chain to run on Windows to target x86 Android? The tool chain is already setup to build on Windows (cygwin) targeting ARM; There are also existing pre-built (unofficial) NDKs for targeting x86, but these contain pre-built tools for x86 Linux, not Windows. The NDK contains a build-toolchain.sh script to rebuild its tool chain; the question is, what specifically needs done to get that to build a tool chain targeting Android x86?

    Read the article

  • MSBuild: building website using AspNetCompiler - adding references?

    - by Tom Morgan
    Hi, I'm attempting to build a ASP.NET website using MSBuild - specifically the AspNetCompiler tag. I know that, for my project, I need to add some references. Within Visual Studio I have several references, one is a project reference and the others are some DLLS (AjaxControlToolkit etc). I'm happy not referencing the project and referencing the DLL instead - however I just can't work out how to add a reference. I've looked up and down and this is what I've found so far: <Target Name = "PrecompileWeb"> <AspNetCompiler VirtualPath = "DeployTemp" PhysicalPath = "D:\AutoBuild\CruiseControl\Projects\Websites\MyCompany\2.0.0\WorkingDirectory\VSS" TargetPath = "D:\AutoBuild\CruiseControl\Projects\Websites\MyCompany\2.0.0\PreCompiled" Force = "true" Debug = "true" Updateable = "true"/> </Target> Also - I've picked up this bit of code from around the web somewhere, which I thought might help: <ItemGroup> <Reference Include="My.Web.DataEngine, Culture=neutral, processorArchitecture=MSIL"> <SpecificVersion>False</SpecificVersion> <HintPath>D:\AutoBuild\CruiseControl\Projects\Components\My.Web.DataEngine\bin\Debug\My.Web.DataEngine.dll</HintPath> </Reference> </ItemGroup> What I want to do is add a attribute to the AspNetCompiler tag, something like: References="@(Reference)" but MSBuild isn't very happy about this. I've been a bit stuck in not being able to find decent references on doing this anywhere: so I'd really apprechiate some pointers or reference material etc. (or just the answer!) Thanks for you help. -tom

    Read the article

  • Building Dynamic Classes in Objective C

    - by kjell_
    I'm a somewhat competent ruby programmer. Yesterday I decided to finally try my hand with Apple's Cocoa frameworks. Help me see things the ObjC way? I'm trying to get my head around objc_allocateClassPair and objc_registerClassPair. My goal is to dynamically generate a few classes and then be able to use them as I would any other class. Does this work in Obj C? Having allocated and registered class A, I get a compile error when calling [[A alloc] init]; (it says 'A' Undeclared). I can only instantiate A using runtime's objc_getClass method. Is there any way to tell the compiler about A and pass it messages like I would NSString? A compiler flag or something? I have 10 or so other classes (B, C, …), all with the same superclass. I want to message them directly in code ([A classMethod], [B classMethod], …) without needing objc_getClass. Am I trying to be too dynamic here or just botching my implementation? It looks something like this… NSString *name = @"test"; Class newClass = objc_allocateClassPair([NSString class], [name UTF8String], 0); objc_registerClassPair(newClass); id a = [[objc_getClass("A") alloc] init]; NSLog(@"new class: %@ superclass: %@", a, [a superclass]); //[[A alloc] init]; blows up.

    Read the article

  • Building cURL & libcurl with Visual Studio 2010

    - by KTC
    With the help of question #197444, I have managed to build cURL & libcurl from source on Windows from within the Visual Studio 2010 IDE, OpenSSL 1.0.0, and zlib 1.2.5. The problem I see is that at the moment, if I run the resulting curl.exe with the argument -V, then the version that it report is curl 7.20.1 (i386-pc-win32) libcurl/7.20.1 OpenSSL/0.9.8d zlib/1.2.3 Protocols: dict file ftp ftps http https imap imaps ldap pop3 pop3s rtsp smtp smtps telnet tftp Features: AsynchDNS Largefile NTLM SSL libz Note the versions reported for both OpenSSL & zlib doesn't match if what I actually used. Any idea on how to fix this? p.s. Is there a clear list of optional components that can be compiled into libcurl and what options/preprocessor directive to use? (e.g. SSPI, libidn, ...?)

    Read the article

  • Building a generic page "Query Analyzer" like in Asp.net with SMO

    - by Rodrigo
    Hello, I'm build a web page in ASP.net is supposed to work just like Query Analyzer. It has basically a textarea to input the sql command, and an Execute button. I'm using SMO to execute the command in the database, as follows: //Create object SMO Microsoft.SqlServer.Management.Smo.Server server = new Microsoft.SqlServer.Management.Smo.Server(new Microsoft.SqlServer.Management.Common.ServerConnection(oConn)); //To execute the command server.ConnectionContext.ExecuteNonQuery(tbx_cmd.Text); //OR myDataset = server.ConnectionContext.ExecuteWithResults(tbx_cmd.Text); The problem is that the textarea command can contain anything, from a stored procedure (with GO's statements) and any select command that return resultsets, just like Query Analyzer. But, if I have GO statements, I only can perform the query using ExecuteNonQuery method. If I use the ExecuteWithResults method, it raises errors because of the GO statements. And if I want the resultsets to be available, of course I can only use the ExecuteWithResults method. Does anybody knows how can I do to execute the same command texts at the same time? Thank you!

    Read the article

  • which language to use for building web application?

    - by harshit
    Hi I already have experience in developing websites using java technologies ... Now i have a task to develop another website and i have the liberty to select technology to built. I dont want to built using Java/J2ee standard technology as i want to learn new language. The specification about website i can give is that: 1) its a real estate based site. 2) so it will have a db of real estate data around million records 3) website will have more than 1000 hits /day and will have various functionality like search, add , delete,generate reports etc. So i mean UI should be good and fast. Technologies i have in mind .NEt( i have already worked on it but it licensed so may not go for it) , Groovy, Ruby on rails ,Play, GWT etc ... I am a college student and the website is again of a student(non techie guy) so i have 5-6 mnths to bring the website up I have read about them but all have adv and disadv but would like to hear from people who have used it and can tell me what they felt about the languages and problems while developing it.. Please feel free to drop any opinion you feel . Thanks

    Read the article

  • Building a template to auto-scaffold Index views in ASP.NET MVC

    - by DanM
    I'm trying to write an auto-scaffolder for Index views. I'd like to be able to pass in a collection of models or view-models (e.g., IQueryable<MyViewModel>) and get back an HTML table that uses the DisplayName attribute for the headings (th elements) and Html.Display(propertyName) for the cells (td elements). Each row should correspond to one item in the collection. Here's what I have so far: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> <% var items = (IQueryable<TestProj.ViewModels.TestViewModel>)Model; // Should be generic! var properties = items.First().GetMetadata().Properties .Where(pm => pm.ShowForDisplay && !ViewData.TemplateInfo.Visited(pm)); %> <table> <tr> <% foreach(var property in properties) { %> <th> <%= property.DisplayName %> </th> <% } %> </tr> <% foreach(var item in items) { %> <tr> <% foreach(var property in properties) { %> <td> <%= Html.Display(property.DisplayName) %> // This doesn't work! </td> <% } %> </tr> <% } %> </table> Two problems with this: I'd like it to be generic. So, I'd like to replace var items = (IQueryable<TestProj.ViewModels.TestViewModel>)Model; with var items = (IQueryable<T>)Model; or something to that effect. The <td> elements are not working because the Html in <%= Html.Display(property.DisplayName) %> contains the model for the view, which is a collection of items, not the item itself. Somehow, I need to obtain an HtmlHelper object whose Model property is the current item, but I'm not sure how to do that. How do I solve these two problems?

    Read the article

  • Building the DropThings ASP.NET Solution

    - by Sephrial
    Hi all, I'm attempting to build a project called DropThings but I am getting all these errors and I'm not sure how to resolve them. Can anyone lend a helping hand? I'm wondering if anyone else can build the website and if so, what steps it took you. Thanks in advance! Source Code: http://code.google.com/p/dropthings/ My Configuration: Visual Studio 2008 SP1 SQL 2005 (with the database loaded + Web.Config file configured) Microsoft Silverlight Projects 2008 Errors: Error File Metadata file '...\Dropthings-v2.2.0\src\DashboardDataAccess\bin\Debug\Dropthings.DataAccess.dll' could not be found. ...\Dropthings-v2.2.0\src\DashboardBusiness Build failed due to validation errors in ...\Dropthings-v2.2.0\src\DashboardDataAccess\DropthingsDataContext.dbml. Open the file and resolve the issues in the Error List, then try rebuilding the project. ...\Dropthings-v2.2.0\src\DashboardDataAccess\DropthingsDataContext.dbml Metadata file '...\Dropthings-v2.2.0\src\DashboardBusiness\bin\Debug\Dropthings.Business.dll' could not be found. ...\Dropthings-v2.2.0\src\Dropthings.Business.Activities Metadata file '...\Dropthings-v2.2.0\src\DashboardDataAccess\bin\Debug\Dropthings.DataAccess.dll' could not be found. ...\Dropthings-v2.2.0\src\Dropthings.Business.Activities Metadata file '...\Dropthings-v2.2.0\src\Dropthings.Business.Activities\bin\Debug\Dropthings.Business.Activities.dll' could not be found. ...\Dropthings-v2.2.0\src\Dropthings.Business.Workflows Metadata file '...\Dropthings-v2.2.0\src\DashboardBusiness\bin\Debug\Dropthings.Business.dll' could not be found. ...\Dropthings-v2.2.0\src\Dropthings.Business.Workflows Metadata file '...\Dropthings-v2.2.0\src\DashboardDataAccess\bin\Debug\Dropthings.DataAccess.dll' could not be found. ...\Dropthings-v2.2.0\src\Dropthings.Business.Workflows Metadata file '...\Dropthings-v2.2.0\src\DashboardDataAccess\bin\Debug\Dropthings.DataAccess.dll' could not be found Dropthings.Widget.Framework Metadata file '...\Dropthings-v2.2.0\src\DashboardBusiness\bin\Debug\Dropthings.Business.dll' could not be found. ...\Dropthings-v2.2.0\src\Dropthings.Business.Facade Metadata file '...\Dropthings-v2.2.0\src\DashboardDataAccess\bin\Debug\Dropthings.DataAccess.dll' could not be found. ...\Dropthings-v2.2.0\src\Dropthings.Business.Facade Metadata file '...\Dropthings-v2.2.0\src\DashboardDataAccess\bin\Debug\Dropthings.DataAccess.dll' could not be found Dropthings.Web.Framework Metadata file '...\Dropthings-v2.2.0\src\Dropthings.Business.Workflows\bin\Debug\Dropthings.Business.Workflows.dll' could not be found Dropthings.Web.Framework Metadata file '...\Dropthings-v2.2.0\src\Dropthings.Business.Activities\bin\Debug\Dropthings.Business.Activities.dll' could not be found Dropthings.Web.Framework Metadata file '...\Dropthings-v2.2.0\src\Dropthings.Widget.Framework\bin\Debug\Dropthings.Widget.Framework.dll' could not be found Dropthings.Web.Framework Metadata file '...\Dropthings-v2.2.0\src\Dropthings.Business.Facade\bin\Debug\Dropthings.Business.Facade.dll' could not be found Dropthings.Web.Framework Metadata file '...\Dropthings-v2.2.0\src\DashboardBusiness\bin\Debug\Dropthings.Business.dll' could not be found Dropthings.Web.Framework The type or namespace name 'Framework' does not exist in the namespace 'Dropthings.Web' (are you missing an assembly reference?) ...\Dropthings-v2.2.0\src\Dropthings\web.config

    Read the article

  • xml schema building

    - by amanrahahla
    in xml can any concept inhert the attribute of the main concept as an example: can textbook take the same attribute of book and how? another question if the attribute is a compound noun (i mean two or more words) such as family line it gave me an error when i save it as xml how can i deal with this situation?

    Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >