Search Results

Search found 2602 results on 105 pages for 'dell vostro'.

Page 86/105 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Sun2Oracle: Upgrading from DSEE to the next generation Oracle Unified Directory - webcast follow up

  - by Darin Pendergraft

  Thanks to all of the guest speakers on our Sun2Oracle webcast: Steve from Hub City Media, Albert from UCLA and our own Scott Bonell. During the webcast, we tried to answer as many questions as we could, but there were a few that we needed a bit more time to answer.  Albert from UCLA sent me the following information: Alternate Directory EvaluationWe were happy with Sun DSEE. OUD, based on the research we had done, was a logical continuation of DSEE.  If we moved away, it was to to go open source. UCLA evaluated OpenLDAP, OpenDS, Red Hat's 389 Directory. We also briefly entertained Active Directory. Ultimately, we decided to stay with OUD for the Enterprise Directory, and adopt OpenLDAP for the non-critical edge directories.HardwareFor Enterprise Directory, UCLA runs 3 Dell PowerEdge R710 servers. Each server has 12GB RAM and 2 2.4GHz Intel Xeon E5 645 processors. We run 2 of those servers at UCLA's Data Center in a semi active-passive configuration. The 3rd server is located at UCLA Berkeley. All three are multi master replicated. At run time, the bulk of LDAP query requests go to 1 server. Essentially, all of our authn/authz traffic is being handled by 1 server, with the other 2 acting as redundant back ups.

  Read the article

• Looking for a comfortable Laptop Cooling Pad? Repurpose a pillow as a Laptop Cooling Pad

  - by Gopinath

  Update: This idea sucks as using a pillow blocks laptop cooling fans and air flow, which in turn would damage the laptop. Thanks Vijay I’ve a HP Pavilion laptop which turns hot quickly and most of the time I would not be able to keep it on my lap after 30 minutes of usage. It’s the same case with my DELL laptop and not to blame any specific brand or model. Most of the budget laptops generate lot of heat and tough to keep them on laps for a long time. They burn skin and the irritation sense leaves me with no option other than throwing them away. While searching for options to beat the heat I found Laptop Cooling Pads on Amazon.They attach to the base of laptops and act like a heat shield/sink to protect thighs from the heat generated by laptops. They are available from around $7 and goes up to $100 depending on the features they offer. After reading reviews I selected a trendy looking and comfortable laptop cooling pad and it was around $25 before shipping and taxes. I’m going to buy one of the cooling pads from Amazon. On a second thought I started searching for options to repurpose any of the house hold items as a laptop cooling pad and save money. The option suggested by wife is to repurpose an old pillow as a laptop cooling pad.  Here is my laptop cooling pad Wow! That is a nice suggestion which saved my thighs from laptop heat as well my wallet from spending $25. Even if I’ve to buy a new pillow I would be able to pickup cheap one from Wal-Mart store for as low as $2.  Also I find it is very comfortable to use a pillow as a Laptop Cooling Pad as they are flexible and automatically adjust to the shape of my body.

  Read the article

• VGA monitor won't detect on NVIDIA Quadro NVS 4200M

  - by tanmayk

  I am on a Dell Latitude E6420 and just installed 12.04. When I plug in my external monitor's VGA cable, the laptop doesn't detect any new monitor. Here's the output of my lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) 01:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 0b:00.0 SD Host controller: O2 Micro, Inc. Device 8221 (rev 05) 0b:00.1 Mass storage controller: O2 Micro, Inc. Device 8231 (rev 03) I tried installing the Quadro NVS 4200M from the nvidia website but got stuck in TTY after the installation finished. Any ideas as to how I can get the external monitor to work? Thanks!

  Read the article

• Unity's gone! How do I get it back?

  - by Kelley

  Earlier today my Unity desktop disappeared: I got a black screen with white text, but it disappeared too quickly for me to read. When the desktop reappeared, it was the Ubuntu Classic desktop. I used $ unity --reset but that did not do anything. I tried rebooting so I could choose unity from the list when I logged in, but although there was Ubuntu choice, there was no unity listed (but classic was listed). I was able to install Unity 2D and am using that, but really want to get 3D back. I had been using Ubuntu without problems for several weeks when this happened. My graphics card is onboard a Dell Latitude desktop - a couple years old - and is reported as an Intel G33/G31. I've looked at other requests for help here, and tried suggestions when they seemed to relate to similar problems, but nothing seems to work so far. Any ideas? Thanks! This is part of the output of my latest attempt to run unity --reset Window manager warning: 0x3e01c35 () appears to be one of the offending windows with a timestamp of 1309472834. Working around... Window manager warning: last_user_time (1309473695) is greater than comparison timestamp (1126160). This most likely represents a buggy client sending inaccurate timestamps in messages such as _NET_ACTIVE_WINDOW. Trying to work around... Window manager warning: 0x4c0046c (mdk@Habane) appears to be one of the offending windows with a timestamp of 1309473695. Working around... Window manager warning: Received a NET_CURRENT_DESKTOP message from a broken (outdated) client who sent a 0 timestamp Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x4c0046c (mdk@Habane) Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.

  Read the article

• Nvidia optimus and Steam (on 12.04)

  - by Seiryuu

  I've obtained a copy of the .deb for the Steam beta, but it was pretty disappointing to see that it simply doesn't run. Hardware - Dell XPS L502, with Nvidia Optimus I have bumblebee installed. Trying to run Steam with the Intel HD 3000 completely fails to start it. Message received Installing breakpad exception handler for appid(steam)/version(1352224866_client) followed by a crash with no other information provided. Trying to optirun steam runs the client, but as soon as it gets to the home screen, it says that the Nvidia drivers I am using are out of date (and Steam requires newer drivers to run). It's probably worth to note that it throws the same Installing breakpad... error when run with optirun, but it doesn't crash the client immediately. Any way to fix this? Also, is there a way of manually updating the drivers in bumblebee without breaking anything? Alternatively, is there a reliable way of completely disabling the Intel GPU (in order to use the Nvidia GPU exclusively)? Note: I am using Xmonad with gnome-fallback, if that makes a difference. However, when I tried everything mentioned with Unity (2d), everything was the same, so I guess it has nothing to do with the window manager in use.

  Read the article

• Screen Resolution stuck at 640x480 after installing Bumblebee

  - by Saurabh Agarwal

  I have a Dell XPS 15z laptop. As you can see here, there are some issues with NVidia drivers. The site recommends installation of Bumblebee (instructions given in the link). I am posting it again for ease: $ sudo add-apt-repository ppa:bumblebee/stable $ sudo apt-get update && sudo apt-get upgrade $ sudo apt-get install bumblebee bumblebee-nvidia $ sudo usermod -a -G bumblebee $USER After restarting the computer however, the screen resolution was stuck at 640x480 and I got the following error message as soon as I logged in: **Could not apply the stored configuration for monitors** none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Prior to the update, the display was absolutely normal and thus there is no doubt about the cause. Albeit, there was no support for graphic drivers. In case it helps, some features of graphics drivers seem to be functional after bumblebee, ie, all features are in order except for the resolution. And if the resolution can't be fixed, please suggest a way to retract the changes so that atleast the prior state may be reachieved. Any help in the matter would be highly appreciated.

  Read the article

• early audio offset in Audacity and VLC, but not Banshee

  - by reek

  I'm editing audio files with speech in Audacity, marking particular types of speech. I just noticed that files edited in Windows have different intervals marked than files edited in Ubuntu. After testing and confirming this error, it seems that the audio playback in Ubuntu clips the sound too early from the end (early offset), which causes the person doing the editing to mark the interval wrongly. Interestingly, the error appears in Audacity and VLC (which I sometimes use for playback), but NOT Banshee. Since both Audacity and VLC have this problem, I assume it is not application-specific. I don't know why Banshee handles this without problem though... Are there any ALSA or Pulseaudio settings that are likely to cause this problem (I know very little about either)? The task itself does not appear to consume large amounts of resources, but I am on an old laptop, so here are my specs: Ubuntu 11.10. Dell XPS m1210 1.6 GHz Intel Core, 2 x 512 Mb 667 MHz RAM, Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01). Audacity settings: Device Interface: ALSA (cannot select anything else)

  Read the article

• Ubuntu 12.10 unmet dependencies

  - by John

  I have Ubuntu 12.10 with 3.2.0.24-generic #39-Ubuntu running on a Dell Inspiron 700m laptop. I have unmet dependencies as follows: root@John-700m:/home/John# sudo apt-get remove --purge linux-image-3.5.0-{18,27,31,34}-generic Reading package lists... Done Building dependency tree Reading state information... Done Package 'linux-image-3.5.0-18-generic' is not installed, so not removed Package 'linux-image-3.5.0-27-generic' is not installed, so not removed Package 'linux-image-3.5.0-31-generic' is not installed, so not removed Package 'linux-image-3.5.0-34-generic' is not installed, so not removed You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-image-generic but it is not going to be installed linux-image-extra-3.5.0-18-generic : Depends: linux-image-3.5.0-18-generic but it is not going to be installed linux-image-extra-3.5.0-27-generic : Depends: linux-image-3.5.0-27-generic but it is not going to be installed linux-image-extra-3.5.0-31-generic : Depends: linux-image-3.5.0-31-generic but it is not going to be installed linux-image-extra-3.5.0-34-generic : Depends: linux-image-3.5.0-34-generic but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). I tried to remove the packages, but I still get the same error message. Any help would certainly be appreciated. @Eric, well noted. Here is the reults: model name : Intel(R) Pentium(R) M processor 1.60GHz flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 Thanks again. @Eric, If I need to downgrade to Ubuntu 12.04 from 12.10, can I do it without having to mess my current partition or files? I also have Windows XP running on the machine. Best. @Eric, if you are online, I could use your help (or anybody's else). I installed the package for non-pae unit and I still get the same error. Any suggestions? Thanks

  Read the article

• Oracle Enterprise Manager Extensibility News - June 2014

  - by Joe Diemer

  Introducing Extensibility Exchange Version 2 On the heals of Enterprise Manager 12c Release 4 this week comes version 2.0 of the Extensibility Exchange.  A new theme allows optimal viewing on a number of different computing devices from large monitor displays to tablets to smartphones.   One of the first things you'll notice is a scrollable banner with the latest news related to Enterprise Manager and extensibility.  Along with the "slider" and the latest entries from Oracle and the Partner community, new features like a tag cloud and an auto-complete search box provide a better way to find the plug-in, connector or other Enterprise Manager entity you are looking for.  Once you find it, a content details page with specific info related to that particular entity will enable you to access it at the provider's site and also rate and comment on that particular item. You can also send an email from the content details page which is routed to the developer.   And if you want to use version 1 of the Extensibility Exchange instead, you will be able to do so via the "Classic" option.  Check it out today at http://www.oracle.com/goto/emextensibility. Recent Additions from Oracle's Partner Community A number of important 3rd party plug-ins have been contributed by Oracle's partner community, which can be accessed via the Extensibility Exchange or by clicking the links in this blog: Dell Open Manage Fusion I-O ION Accelerator NetApp SANtricity E-Series PostgreSQL by Blue Medora You can also check out the following best practices and labs available via the Exchange: Riverbed Stingray Traffic Manager Reference Architecture Datavail Alert Optimizer Custom Templates Apps Associates' Oracle Enterprise Manager "Test Drives" for Oracle Database 12c Management Oracle Enterprise Manager Monitoring Essentials Oracle Application Management Suite for Oracle E-Business Suite

  Read the article

• Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)

  - by simpleton

  I downloaded 12.04.1 and md5 sum checked them and everything is good. Made a live usb and booted up... Just gets to where its about to start with the purple ubuntu loading screen then it goes back to text and gives this message: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) mount: mounting /dev/loop0 on ///filesystem.squashfs failed: Input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs This happens in the live option, or persistent even the file checking one doesn't work Also I've tried a few different F6 options to no avail. I used 'LiLi USB creator' and 'unetbootin' and also 'Universal USB Installer,' all with the same results. I've also tried using a VM and it showed the same. That is when I figured I had a corrupt .iso so I downloaded it again checked the MD5: e235b63c02644e219b7bf3668f479c9e. Only I'm having the same problem. I'm just about ready to give up on 12.04.1 and just go back to 10.04 utill the next LTS comes out. I've got a dell mini 10 btw. Thanks for your time.

  Read the article

• Upgrade won't allow second display to go to 1920x1080

  - by Rick

  I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

  Read the article

• HDMI video output not working for external monitor

  - by user291852

  I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

  Read the article

• How do I access shared folders on Ubuntu server from Mac OS?

  - by Stephen

  I have an old dell desktop running ubuntu 11.04, I also have samba installed on it. I'm trying to access the shared folders on the Ubuntu machine from my Mac, so I go into 'Finder', click on 'Go' and 'Connect to Server'. I type in the ip address of the ubuntu machine smb://xxx.xxx.x.xx and click connect, I can then see the list of shared folders from the ubuntu machine so I know its making a connection. But when I access the 'Music' folder I get an error message stating: There was an error connecting to the server "xxx.xxx.x.xx". Check the server name or IP address, and try again. Any thoughts anyone ? EDIT I have a external hard drive attached to the server, and the folders I'm trying to access are located on that external hard drive. The location of the folder is /media/HD-CELU2/test, so I think the path from Finder should be smb://xxx.xxx.x.xx/media/HD-CELU2/test, but having tested this, I'm still not getting in. P.S. I'm using Samba as I have a Windows machine on my home network as well.

  Read the article

• 12.04 Wi-Fi not working correctly with Intel Pro/Wireless 3945ABG

  - by Jerel

  This is a very strange problem. The only time the Wi-Fi works is when I have the wired connection connected. I have a Dell 6400/e1505 with the Broadcom BCM 4401-B0 internal NIC, and the Intel Pro/Wireless 3945ABG Wi-Fi adapter. I was on 10.0.4 LTS before, and I remember having to screw around to get the Wi-Fi to work, but that was years ago, and now it's acting even stranger than it did back then. If I boot up with the wire connected, the Wi-Fi starts up. If I boot up without the wire connected, the Wi-Fi won't start at all. If after booting with the wire connected, and the Wi-Fi starts up, I then disable the wireless, the wired connection works fine. Without the wire connected, dmesg shows the iwl3945 driver loading and starting with no errors, and the wireless adapter activated. Running rfkill list shows no blocks, but there is no connection to my Wi-Fi. Help! I am more confused than a chameleon in a bag of Skittles.

  Read the article

• Why does 12.04 upgrade abort with out of space error when I have lots of it?

  - by Kristian Thomsen

  When upgrading Ubuntu from 11.10 to 12.04 I discovered an unexpected problem. The upgrade was stopped because there wasn't enough free space for the installation. I managed to free some space and do the upgrade but now a prompt appears after logging in saying I'm out of space. This prompt asks me if I want to examine the problem. The "Disk Usage Analyser" is opened. In the top it says: Total filesystem capacity: 47.0 GB (used: 13.5 GB available: 33.4 GB) Folder -- Usage -- Size / -- 100% -- 12.5 GB usr -- 44.8 % -- 5.6 GB home -- 30.3 % -- 3.8 GB lib -- 13.0 % -- 1.6 GB var -- 9.1 % -- 1.1 GB boot 2.5 % 309.5 GB and a lot of small contributors like: etc, opt, sbin, bin etc. I do not really understand this problem since the analyser in the top says that I have 33.4 GB left in this file system. What can I do to make Ubuntu use the remaining space? Running df -i in the terminal gives: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda7 610800 576874 33926 95% / udev 213451 563 212888 1% /dev tmpfs 218524 486 218038 1% /run none 218524 3 218521 1% /run/lock none 218524 7 218517 1% /run/shm /dev/sda8 2264752 16371 2248381 1% /home The output of df -h Filesystem Size Used Avail Use% Mounted on /dev/sda7 9,3G 7,8G 1,1G 88% / udev 993M 4,0K 993M 1% /dev tmpfs 401M 884K 400M 1% /run none 5,0M 0 5,0M 0% /run/lock none 1003M 152K 1002M 1% /run/shm /dev/sda8 35G 4,0G 29G 13% /home /dev/sda2 101G 64G 37G 64% /media/A2C8E28BC8E25CD3 Running sudo fdisk -l gives Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 63 96389 48163+ de Dell Utility /dev/sda2 * 98304 210434488 105168092+ 7 HPFS/NTFS/exFAT /dev/sda3 210436094 312576704 51070305+ f W95 Ext'd (LBA) /dev/sda5 306279288 312576704 3148708+ dd Unknown /dev/sda6 210436096 214341631 1952768 82 Linux swap / Solaris /dev/sda7 214343680 233873407 9764864 83 Linux /dev/sda8 233875456 306278399 36201472 83 Linux Partition table entries are not in disk order

  Read the article

• No GUI boot; startx error, I suspect no filesystem corruption.

  - by Dharmaj Soni

  Till yesterday, my Ubuntu 9.10 was working fine. I had watched a movie using vlc. I had also charged my ipod using the laptop. Today, when I started it, I automatically booted into command line. There seems to be no filesystem corruption etc as I can view/open (text) files. Before the CLI appeared, the screen blinked with a cursor, then the white Ubuntu logo flashed, and then I got the CLI login prompt. After logging in, if I try startx, to start gnome, I get the following error after a few seconds: giving up xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error* The same error comes up, even if I use sudo, or if I change my directory to '/' before using startx, and also when, from the grub, using the recovery mode option to load into CLI, and then trying startx. On trying command 'xinit', I get "Server error" Also, on trying GDM, I get 2 errors. I cannot connect to the internet in this state. Thanks for any help. I am using Dell Inspiron 1440, no special graphics card.

  Read the article

• How do I install BCM4312 wireless drivers?

  - by t3ch

  completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• xubuntu install on p4

  - by adi

  Hello i am thinking of installing xubuntu on a dell gx260 pentium 4 pc with: 1.8GHz processor 64mb integrated video card(had other but it died on me) 1GB of RAM Ive installed lubuntu but im not enjoying it since i can not make shortcuts of partitions or folders on desktop for faster usability(i dont want them on my bar, want them on desktop) also the buggs i seen on it made me reconsider of using lubuntu:mplayer not working, no video was working,chromium outdated etc and i dont want to stay all day to find solutions over the internet. And seen on internet from xubuntu that theyve had shortcuts for theyre partitions on desktop, and is more attractive.(can some1 tell me if with xubuntu u can make shortcuts on desktop, i mean the shortcuts remain after reboot) 1 more thing to add:at installing lubuntu when it asked me where to install it only showed me the entire hard drive(i have 3 partitions on it) and made me select the size of the lubuntu partition from 1 that the installer wanted.(from local disk D: from windows xp view),need to mention that i have windows xp on the machine which is on local C:, kept my downloads on local D:, and other stuff on E:. I want an ubuntu distro which would work fine especially for internet purpose. Can someone lend me a hand on this?

  Read the article

• cpufreq not available 11.10

  - by code shogan

  on 11.04 I had cpufreq working on my "AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02" processors, however now on oneiric cpufreq won't load. The core temperature of my cpu is normally 40 c, but lately it's cooking away at 75-80+ c and the fan is always extremely loud even when cpu usage has at 0.4%. and after this dmesg | grep -i cpu I got: Brought up 2 CPUs Switch to broadcast mode on CPU1 Switch to broadcast mode on CPU0 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 ACPI: acpi_idle registered with cpuidle cpufreq-nforce2: No nForce2 chipset. cpuidle: using governor ladder cpuidle: using governor menu powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 (2 cpu cores) (version 2.20.00) I see something about governors and ladder there, does this mean the OS is able to scale my cpu's or not? If so is there a way I can determine it's working? I saw that for other users that the wrong module had been loaded and by disabling it they were able to get cpufreq loaded. How can I tell what scaling module is loaded? stats: Ubuntu Oneiric 32bit Dell Inspiron 1501

  Read the article

• Laptop battery life drastically decreased compared to Windows 7

  - by Aron Rotteveel

  I am running Ubuntu 10.10 on my Dell Studio XPS 1640 and have about one hour of battery life in it, compared to about 2.5 hours running on Windows 7. This is with wireless and bluetooth on, but still, the difference seems incredible. What could be causing such a difference and is there a way to close the gap without losing core functionality? EDIT: here's some output from powertop. This is with bluetooth turned off and Wifi turned on. The output seems pretty normal to me, but as indicated, this is about 1 hour of battery life on a full battery... Wakeups-from-idle per second : 476.2 interval: 10.0s Power usage (ACPI estimate): 2.5W (1.2 hours) Top causes for wakeups: 30.0% (167.2)D chrome 21.0% (117.3) [extra timer interrupt] 13.9% ( 77.4) [kernel scheduler] Load balancing tick 3.4% ( 18.9)D xchat 7.1% ( 39.8) [iwlagn] <interrupt> 5.9% ( 32.9) AptanaStudio3 3.9% ( 21.6)D java 2.7% ( 14.9) [TLB shootdowns] <kernel IPI> 2.5% ( 14.1) docky 1.8% ( 10.0) nautilus 1.6% ( 9.0) thunderbird-bin 1.0% ( 5.5) [ahci] <interrupt> 0.9% ( 5.0) syndaemon 0.8% ( 4.3) [kernel core] hrtimer_start (tick_sched_timer) EDIT: after changing /proc/sys/vm/laptop_mode to 5 (it was set to 0), wakeups seem to have decreased, although usage still seems far too high: Wakeups-from-idle per second : 263.8 interval: 10.0s Power usage (ACPI estimate): 2.6W (0.9 hours) EDIT: I seem to have discovered the main cause: I was using the open source ATI Drivers. I recently installed the official ATI drivers and laptop battery life seems to have doubled since. EDIT: last edit. The previous 'solution' of installing the official ATI drivers turns out to be a non-solution. Although it does increase battery life, my laptop resolution is maxed out at 1200x800 after a reboot. (Please note that this problem does not need answering in this question as it is a seperate case)

  Read the article

• Why does Eclipse keep crashing and dpkg erroring out?

  - by Sanju Sony Kurian

  I AM GETTING THE ERROR E: Sub-process /usr/bin/dpkg returned an error code (1) WHILE I WAS TRYING TO UPGRADE MY PC. i USE ECLIPSE AND IT KEEPS ON CRASHING... pLEASE HELP I ATTACH THE ERROR sanju@sanju-Dell-System-XPS-L502X:~$ upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: aisleriot gir1.2-rb-3.0 gir1.2-totem-1.0 gnome-disk-utility gnome-keyring libgck-1-0 libgcr-3-1 libtotem0 linux-generic linux-headers-generic linux-image-generic rhythmbox rhythmbox-data rhythmbox-mozilla rhythmbox-plugin-cdrecorder rhythmbox-plugin-magnatune rhythmbox-plugin-zeitgeist rhythmbox-plugins seahorse totem totem-common totem-mozilla totem-plugins 0 upgraded, 0 newly installed, 0 to remove and 23 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y Setting up grub-pc (1.99-21ubuntu3.1) ... /var/lib/dpkg/info/grub-pc.config: 35: /etc/default/grub: Syntax error: EOF in backquote substitution dpkg: error processing grub-pc (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: grub-pc E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Resizing partition using Gparted gives "can't have overlapping partitions" error

  - by Marcus

  I just decided to install Ubuntu 12.04 alongside Windows 7 on my Dell laptop. However I didn't do this manually but instead used the "Run Ubuntu alongside Windows 7" option upon installation, and now the partition that Ubuntu runs on has very little space (It's giving me warnings). I'm trying to use Gparted 0.12.1-5 (via a live CD) to give Windows less space and give Ubuntu more. I've managed to remove 100GB from the Windows partition so I now have some unallocated space between Windows and Ubuntu. This is what it looks like inside Ubuntu (not using the live CD, since it won't let me mount a USB to save a screenshot): http://i.stack.imgur.com/0keQq.png So first I take sda4 (extended?) and resize it to the left so it takes up all the unallocated space. Then I resize sda5 (ext4) as well so it takes up all the new space. However, when I hit apply, it fails on the first action (resizing sd4), saying "can't have overlapping partitions". Any ideas as to why this happens? I also tried resizing sda4 by just a few MB so that it definitely didn't overlap anything, but I still got the same error message. To clarify, I am doing it using the CD, I just took the screenshot from Ubuntu. Any help would be greatly appreciated! And again, I can't mount any USB (I'm following the guide on the gparted website but it says "Invalid argument" or something like that) so I couldn't attach the details file from Gparted. If this is needed, I may need some hints on how to solve the USB issue as well. :) Thanks

  Read the article

• Fixing Two keys events on single key press by xmodmap

  - by William.Ebe

  I'm using Dell Latitude D620. Whenever, I'm pressing the space key, the down arrow key also triggered perform it's action. Here is the log: KeyPress event, serial 30, synthetic NO, window 0x3200001, root 0x10c, subw 0x0, time 2248017, (70,-9), root:(76,39), state 0x0, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 31, synthetic NO, window 0x3200001, root 0x10c, subw 0x0, time 2248018, (70,-9), root:(76,39), state 0x0, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XmbLookupString gives 1 bytes: (20) " " XFilterEvent returns: False KeyRelease event, serial 33, synthetic NO, window 0x3200001, root 0x10c, subw 0x0, time 2248083, (70,-9), root:(76,39), state 0x0, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XFilterEvent returns: False KeyRelease event, serial 33, synthetic NO, window 0x3200001, root 0x10c, subw 0x0, time 2248085, (70,-9), root:(76,39), state 0x0, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False ClientMessage event, serial 33, synthetic YES, window 0x3200001, message_type 0x157 (WM_PROTOCOLS), format 32, message 0x155 (WM_DELETE_WINDOW) The above log is for a single press+release of spacebar key. I would like to know how to fix that. Thanks. PS: I'm using the same laptop to post question. If somebody helps to align it into code format, it would be helpful as I can't do that with this keyboard properly.

  Read the article

• Dual Boot, Dual Hard Drives!

  - by Mars

  I'm posting this question after reading most of similar ones. My situation is different here in the fact that I'm installing on SSD and not partitioning my HDD, and that I can actually boot! I'm just looking to improve the convenience of having easier way to choose. 1- I have a Dell Inspiron 15R SE. It has HDD (1TB) and SSD (32GB). I managed to do whatever things I did in distant past to set the SSD free (I don't really care how fast my system boots). Now I wanted to install Linux on the SSD and leave the HDD untouched. It's way too precious for me to mess with it. So, I repartitioned the SSD to: 30GB for /root, 1GB for /swap, and 100MB for /boot. I installed Linux on the root and the GRUB on boot (of the SSD). Now GRUB immediately boots into linux and doesn't allow me to boot to Windows. BUT! If I enable UEFI Boot manager and choose "Windows Boot Manager" after hitting F12, I can boot into Windows 8 normally. I'd say that's pretty ok, except, I'd prefer to have the option to boot into which one or at the very least, default to boot to Windows. 2- I'm concerned that if I now delete the SSD partition, that the boot will break and I won't be able to boot anything! Does this seem like a valid concern? I made that choice of having linux on SSD because I'm going to be training on it, so I expect multiple resets from time to time.

  Read the article

• XF86 keybinds in Openbox

  - by vasa1

  Lubuntu uses Openbox as its window manager. ~/.config/openbox/lubuntu-rc.xml is a file that specifies, among other things, keybinds for various commands. Most of the keybinds in lubuntu-rc.xml use modifier keys such as Control, Shift, Alt, and Super. For example, one way of opening a terminal window would be by pressing Control+Alt+T together: <!-- Launch a terminal on Ctrl + Alt + T--> <keybind key="C-A-T"> <action name="Execute"> <command>lxsession-default terminal</command> </action> </keybind> But there is also this: <!-- Keybinding for terminal button--> <keybind key="XF86WWW"> <action name="Execute"> <command>lxsession-default terminal</command> </action> </keybind> <keybind key="XF86Terminal"> <action name="Execute"> <command>lxsession-default terminal</command> </action> </keybind> What are keybind key="XF86WWW" and keybind key="XF86Terminal"? How do I locate these keys on my laptop's keyboard? My laptop is a Dell Inspiron N 1545 from 2008.

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >