Search Results

Search found 13930 results on 558 pages for 'dev center'.

Page 86/558 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• GIT and Django Projects

  - by Garfonzo

  I have two servers, a Dev server and a Production server. The Production server runs a live Django site, while the Dev server has a copy of the Django project. I use the Dev server to work on the Django site, make improvements, fix bugs, etc. Once I am satisfied with how the Dev version is working, I move the whole Django directory from the Dev server and replace the same directory on the Production server. The two servers are not on the same LAN so the process is not straight forward. There are a few issues with this that I am having so far. Moving the whole directory is laborious and time consuming If I only change a few files, it is even move tedious to replace a few files than the whole directory since the project is getting fairly large and I worry that I'll miss something I often run into permission issues after I've moved things It's super inefficient, and, due to lack of time, I haven't bothered figuring out a new method. Now it's just getting out of hand and i need to address the situation. I am thinking I need to move to a GIT repository for this process. But my question is how would I set this all up? Do I host the repository on the Production server, pull from the Dev server, do work, then commit? Then I would pull from the Production server (same server the repo is hosted on) to run the current working version? Do I host the repo on the Dev Server, pulling from the same server to do work on the repo, then pull a working version onto the Production server? Should I be hosting the repo on a different server than the Production server and the Dev server (a third server)? Are there any special considerations with Django and repos that I need to worry about? Thanks for the help :)

  Read the article

• mdadm lvm and ext4 slowness - How can I speed it up?

  - by beatbreaker

  I can't figure out why I'm getting such terrible times out of my mdadm and in particular the lvm partitions in it. I made the raid: mdadm --create --verbose /dev/md0 --level=5 --chunk=1024 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sda1[0] sdd1[3] sdc1[2] sdb1[1] 2930279424 blocks level 5, 1024k chunk, algorithm 2 [4/4] [UUUU] I then created the physical volume, volume group, and logical volumes, I then formatted the logical volumes to ext4 using the following commands I got from here: http://busybox.net/~aldot/mkfs_stride.html mkfs.ext3 -b 4096 -E stride=256,stripe-width=768 /dev/datavg/blah Now I'm confused, I had these lvs running real quick before in mdadm but now that I've 'optimized' everything it's slower, eg, before: /dev/datavg/lv_audio: Timing buffered disk reads: 598 MB in 3.01 seconds = 198.85 MB/sec but now after: /dev/datavg/audio: Timing buffered disk reads: 198 MB in 3.00 seconds = 65.96 MB/sec That's pitiful! What's happened here? Did I not follow the instructions correctly? Can i reshape the ext4 partitons to default back to what they were? (I used defaults before and they were fine!)

  Read the article

• jQuery .animate() not animating backgroundPosition in IE

  - by mikemike

  I'm trying to animate a background image to move down a set amount of pixels but remain in the center of the page. Upon another click of an element I need it to move back to the top, but still remain in the center. Below is the current code: $(document).ready(function() { $('#email_campaigns').click(function(){ var width = $(window).width(); width = (width / 2) - 700; if($('#email_campaigns_box').css('display') == 'none'){ //$('body').css('background-position','center 119px'); $('body').animate({ backgroundPosition: (width + "px 119px") }, {duration:500}); } else { //$('body').css('background-position','center top'); $('body').animate({ backgroundPosition: (width + "px 0px") }, {duration:500}); } $('#email_campaigns_box').slideToggle("slow"); $('#client_login_box').slideUp("slow"); }); $('#client_login').click(function(){ var width = $(window).width(); width = (width / 2) - 700; alert(width); if($('#client_login_box').css('display') == 'none'){ //$('body').css('background-position','center 119px'); $('body').animate({ backgroundPosition: (width + "px 119px") }, {duration:500}); } else { //$('body').css('background-position','center top'); $('body').animate({ backgroundPosition: (width + "px 0px") }, {duration:500}); } $('#client_login_box').slideToggle("slow"); $('#email_campaigns_box').slideUp("slow"); }); }); I cannot pass 'center', as it will onyl accept numeric values. My goal is to calulate the center of the page in pixels (width = (width / 2) - 700;), and then animate to this rough position (it's normally out by a few pixels due to scrollbars, and then force to the center using a .css() call. The problem is that IE does not want to play ball. IE will not animate at all. Firefox/Safari/Chrome all work as expected. Below is a live example: http://recklessnewmedia.com/new/# (click 'email campaigns' at the top). Thanks

  Read the article

• Firefox radial gradient issue

  - by Tural Teyyuboglu

  Trying to set radial gradient to the bg. The problem is, all other browsers shows gradient, on Firefox doesn't. What's wrong? Generated this code on this website http://www.colorzilla.com/gradient-editor/ (with ie9 support) background: rgb(255,255,255); background: url(data:image/svg+xml;base64,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); background: -moz-radial-gradient(center, ellipse cover, rgba(255,255,255,1) 0%, rgba(234,234,234,1) 100%); background: -webkit-gradient(radial, center center, 0px, center center, 100%, color-stop(0%,rgba(255,255,255,1)), color-stop(100%,rgba(234,234,234,1))); background: -webkit-radial-gradient(center, ellipse cover, rgba(255,255,255,1) 0%,rgba(234,234,234,1) 100%); background: -o-radial-gradient(center, ellipse cover, rgba(255,255,255,1) 0%,rgba(234,234,234,1) 100%); background: -ms-radial-gradient(center, ellipse cover, rgba(255,255,255,1) 0%,rgba(234,234,234,1) 100%); background: radial-gradient(center, ellipse cover, rgba(255,255,255,1) 0%,rgba(234,234,234,1) 100%); filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#ffffff', endColorstr='#eaeaea',GradientType=1 );

  Read the article

• IPhone SDK help with minigame

  - by Harry

  right basically what ive got is an app which is a ball and bat and its how many bounces you can achieve, it works alright but there is one problem, when the ball hits the side of the bat it throws it off course and its like the frame of the ball is bouncing in the frame of the bat, Here is my code in my mainview.m #import "MainView.h" #define kGameStateRunning 1 @implementation MainView @synthesize paddle, ball; - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [[event allTouches] anyObject]; CGPoint location = [touch locationInView:touch.view]; CGPoint xLocation = CGPointMake(location.x,paddle.center.y); paddle.center = xLocation; } -(IBAction) play { pos = CGPointMake(14.0,7.0); [NSTimer scheduledTimerWithTimeInterval:0.05 target:self selector:@selector(onTimer) userInfo:nil repeats:YES]; } -(void) onTimer { ball.center = CGPointMake(ball.center.x+pos.x,ball.center.y+pos.y); if(ball.center.x > 320 || ball.center.x < 0) pos.x = -pos.x; if(ball.center.y > 460 || ball.center.y < 0) pos.y = -pos.y; [self checkCollision]; } -(void) checkCollision { if(CGRectIntersectsRect(ball.frame,paddle.frame)) { pos.y = -pos.y; } } @end can anyone work out the problem here? Thanks Harry

  Read the article

• View results of affine transform

  - by stckjp

  I am trying to find out the reason why when I apply affine transformations on an image in OpenCV, the result of it is not visible in the preview window, but the entire window is black.How can I find workaround for this problem so that I can always view my transformed image (the result of the affine transform) in the window no matter the applied transformation? Update: I think that this happens because all the transformations are calculated with respect to the origin of the coordinate system (top left corner of the image). While for rotation I can specify the center of the rotation, and I am able to view the result, when I perform scaling I am not able to control where the transformed image goes. Is it possible to somehow move the coordinate system to make the image fit in the window? Update2: I have an image which contains only ROI at some position in it (the rest of the image is black), and I need to apply a set of affine transforms on it. To make things simpler and to see the effect of each individual transform, I applied each transform one by one. What I noticed is that, whenever I move (translate) the image such that the center of the ROI is in the center of the coordinate system (top left corner of the view window), all the affine transforms perform correctly without moving. However, by translating the center of ROI at the center of the coordinate system, the upper and the left part of the ROI remain cut out of the current view window. If I move ROI's central point to another point in the view window (for example the window center), an affine transform of type: A=[a 0 0; 0 b 0] (A is 2x3 matrix, parameter of the warpAffine function) moves the image (ROI), outside of the view window (which doesn't happen if the ROI's center is in the top-left corner). How can I modify the affine transform so the image doesn't move out of its place (behaves the same way as when the ROI center is in the center of the coordinate system)?

  Read the article

• Why does my Google maps api v3 and side panel not fill my page upon resizing?

  - by Gavin

  I'm developing a web page and I have a side panel on the left with a search bar and a Google maps api v3 filling the rest of the page to the right. When I make the browser very small vertically, there is a white space between the side panel and the map, and the bottom of the browser. However, the text continues to the bottom of the browser. It looks like: Here's my css code: <style type="text/css"> body {margin:0;} #panel {height:100%; width:300px; position:absolute; padding:0;background-color:#8C95A0;} #header {padding:2px; text-align:center} #address_instruction {position:relative; top:7%; padding:2px; text-align:center} #geocoder {position:relative; top:8%; padding:2px; text-align:center} #toggle_instruction {position:relative; top:22%; padding:2px; text-align:center} #layers {position:relative; top:25%; padding:2px; text-align:center} #layer0 {padding:2px; text-align:center} #layer1 {padding:2px; text-align:center} #layer2 {padding:2px; text-align:center} #link {top:50%; position:relative; padding:2px; text-align:center} #map_canvas {height:100%; left:300px; right:0px; position:absolute; padding:0;} </style> The IDs within #panel refer to the items on the left hand side in the panel. Why don't the side panel background color and map extend to the bottom of the browser?

  Read the article

• php link to call another php page

  - by user2086894

  i have a php page which contain this field: Delete i want when i press on the Delete to call the delcat.php and send a categoryid which is in a field in the same table. any one can help me to reach this please? here my complete table code: <table border="0" align='center' class="styled-table"> <tr class="thh"> <th class="thh">Category Code</th> <th class="thh">Category Name </th> <th class="thh">Category IMage </th> <th class="thh">Edit</th> <th class="thh">Delete</th> </tr> <?php for ($counter = 0; $row = mysql_fetch_row ($resultSet); $counter++) { print ("<tr align='center' class='trh'>"); print ("<td align='center' class='tdh'>$row[0]</td>"); print ("<td align='center' class='tdh'>$row[1]</td>"); print ("<td align='center' class='tdh'><img src='$row[2]' width='50' height='50'></td>"); print ("<td align='center' class='tdh' width='50' align='center'><a href src='#'>Edit</a></td>"); print ("<td align='center' class='tdh' width='50' align='center'><a href src='delcat.php'>Delete</a></td>"); print("</tr>"); }

  Read the article

• SQLAuthority News – Learning Trip – Traveling to Learn SQL Server

  - by pinaldave

  I am currently traveling to Delhi to learn SQL Server in person from my friend. You can read more details about why am I learning SQL Server.  I have signed up for the course End to End SQL Server Business Intelligence at Koenig Solutions. Yesterday I blogged about my registration experience and today I am going to write about my  experience once I arrived at Delhi. From Ahmedabad to Delhi I stay with my wife and daughter in Bangalore (IT Hub of India), my hometown is Ahmedabad. My parents stay in city nearby Ahmedabad. I decided to spend few days with my folks before I sign up for 3 days of solid learning. I had selected an early morning flight to Delhi. I landed at 8:30 AM in Delhi. As soon as I checked email in my mobile I was really glad that I had received details of my pick up vehicle from Koenig. I walked out of the airport and I noticed that a driver was waiting with a placard with my name and photo associated with it. He was in Koenig uniform so there was no chance to make mistakes. In minutes of landing in Delhi I was in my transport heading to the Koenig Training Center. After the quick introduction driver handed me a bag (to be precise Eco friendly bag). The bag contained following items: My registration form All necessary documents in print which I had received earlier A Printed Book of the course next day INR 1000 (What?) I was glad to receive the bag but I was very confused with the Rs 1000. I decided to figure this out once I reach to the training center. Arriving at Koenig Inn Deluxe Koenig registration fees include all the stay and meals. I had opted for Koenig Inn Deluxe as my stay as it was recommended by my friend as well it was the right economical choice for me. When I reached to my accommodation, they were well aware of my arrival and was immediately led to my spacious room. The room is well equipped with all the amenities (hot water, air condition, coffee table, munching snacks,  and free internet) and the staff is very friendly. I immediately got ready as I had to go to Koenig Training Center to meet Center Head for a quick introduction. Koenig Inn Delux Koenig Training Center The training center is within five minutes of distance from the accommodation. I was lead to center head right away and had a very meaningful conversation with Ms Hema regarding my learning goals. She gave me a quick tour of the training center. I was amazed with the numbers of lab rooms they have in the center. The labs are spacious and give the most needed hand’s on experience to the users. I was led to the lab where I was suppose to learn my class the very next day as well I was provided my trainer’s profile. Mystery of Rs 1000 Well, after all this I have still not forgotten why I was provided Rs 1000 when arrived at the airport. When I asked about that I was told that because many students comes from foreign places and they may not have Indian Currency when they land at airport. This was for their immediate consumption till they arrive at the training center. Later on they can get their currency converted to local currency at Koenig Travel Desk. My curiosity was satisfied but I had not expected this answer. I am amazed at the attention to the details. Koenig Travel Desk When I heard about Koenig Travel Desk, I remembered that I have few friends in Delhi and Gurgaon. I had completed all of the formalities so I had reset of the day on my hand. I requested the travel desk if they can arrange a day cab for me so I can visit my friends in Guragon. Within 10 minutes I was on my way to Gurgaon. Telerik India Office Visit What did I do in Guragaon? I met my friends Abhishek Kant, Dhananjay Kumar and Amit Chowdhary. I visited Telerik India office and we had an excellent conversation on various aspects of technology and community. The Telerik India office is very spacious and Abhishek Kant (Telerik India Country Manager) gave us a quick tour of the office. We had an excellent lunch and dinner. One thing is for sure – the day was well spent. Pinal Dave, Dhananjay Kumar and Abhishek Kant Later evening I returned to my accommodation and decided to read up a few of the topics which I was going to learn next day. In tomorrow’s blog post I will discuss about my learning experience. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

  Read the article

• Can I install two Ubuntu versions on the same machine?

  - by Abh

  Hello, I have Ubuntu 10.10 32 bit already installed on my machine..I am using MongoDB and it does not work properly with 32 bit machine. So I want to install 64 bit Ubuntu 10.10 on my system on another partition (so that I can have both 32 bit and 64 bit versions). Is it okay to install both 32 bit and 64 bit? I mean will it give any problems? On which partition should I install the 64 bit version? My partitions are as follows: Filesystem Size Used Avail Use% Mounted on /dev/sda1 37G 11G 25G 30% / none 1.4G 260K 1.4G 1% /dev none 1.4G 776K 1.4G 1% /dev/shm none 1.4G 244K 1.4G 1% /var/run none 1.4G 0 1.4G 0% /var/lock /dev/sda6 129G 73G 50G 60% /home /dev/sda7 127G 76G 45G 64% /vol Waiting for your replies.

  Read the article

• Why does my Grub have two entries for Windows?

  - by Tomas Lycken

  I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

  Read the article

• Kernel Panic: Not booting after upgrade from 10.04 to 12.04

  - by Jitesh

  I upgraded from 10.04 to 12.04LTS. Upgrade went fine, even restarted couple of times. Then the next day while booting into Ubuntu, after the grub, it gave the error Kernel panic : not syncing vfs unable to mount root fs on unknown block (0,0). I then booted into live CD and tried the following commands, based on other posts on this forum: sudo fdisk -l As the 8 was on /dev/sda1, sudo mount /dev/sda1 /mnt sudo mount --bind /dev /mnt/dev Now I got the message: mount: mount point /mnt/dev does not exist Then tried sudo mount --bind /proc /mnt/proc Again got the message: mount point point /mnt/proc does not exist. then tried sudo chroot /mnt Got message: chroot: failed to run comman '/bin/bash': No such file or directory Now have no clue what to do next. Unable to boot into Ubuntu. Please help. Jitesh

  Read the article

• Can't remove the libpcap0.8 package

  - by Yogesh

  I am getting error when running apt-get remove root@System:~/Downloads# sudo apt-get remove The following packages have unmet dependencies: libpcap0.8 : Breaks: libpcap0.8:i386 (!= 1.4.0-2) but 1.5.3-2 is installed libpcap0.8:i386 : Breaks: libpcap0.8 (!= 1.5.3-2) but 1.4.0-2 is installed libpcap0.8-dev : Depends: libpcap0.8 (= 1.5.3-2) but 1.4.0-2 is installed E: Unmet dependencies. Try using -f. and when I ran apt-get remove -f this is what happens: root@System:~/Downloads# sudo apt-get remove -f The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads# clear root@System:~/Downloads# sudo apt-get remove -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads# root@System:~/Downloads# sudo apt-get check Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libpcap0.8 : Breaks: libpcap0.8:i386 (!= 1.4.0-2) but 1.5.3-2 is installed libpcap0.8:i386 : Breaks: libpcap0.8 (!= 1.5.3-2) but 1.4.0-2 is installed libpcap0.8-dev : Depends: libpcap0.8 (= 1.5.3-2) but 1.4.0-2 is installed E: Unmet dependencies. Try using -f. root@System:~/Downloads# apt-cache policy libpcap0.8:amd64 libpcap0.8 libpcap0.8-dev libpcap0.8: Installed: 1.4.0-2 Candidate: 1.5.3-2 Version table: 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages *** 1.4.0-2 0 100 /var/lib/dpkg/status libpcap0.8: Installed: 1.4.0-2 Candidate: 1.5.3-2 Version table: 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages *** 1.4.0-2 0 100 /var/lib/dpkg/status libpcap0.8-dev: Installed: 1.5.3-2 Candidate: 1.5.3-2 Version table: *** 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status root@System:~/Downloads# root@System:~/Downloads# sudo apt-get -f remove libpcap0.8 libpcap0.8-dev libpcap0.8-dev:i386 libpcap0.8:i386 Reading package lists... Done Building dependency tree Reading state information... Done Package 'libpcap0.8-dev:i386' is not installed, so not removed. Did you mean 'libpcap0.8-dev'? You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: libpcap-dev : Depends: libpcap0.8-dev but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). root@System:~/Downloads# sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads#

  Read the article

• Bridged virtual interface is not available or visible to ifconfig.

  - by Omniwombat

  Hello all. I'm running Ubuntu 9.04, kernel 2.6.28-18, and vmware-server 2.0.1. I'm attempting to setup a virtual linux machine to use a bridged interface rather than NAT or host-only. Both NAT and host-only work just fine. When running vmware-config.pl, I set /dev/vmnet0 to bridge eth0, /dev/vmnet1 to host-only, and /dev/vmnet8 to NAT. When I run ifconfig -a I see the physical interface (eth0), vmnet1 and vmnet8 both of which are up and have IP addresses assigned to them. I also see other various interfaces that are not relevant here. In the web console, when I ask that the guest machine's network card be bridged, it states that a bridged setup is "Not available" and shows the disabled device icon. Inside the guest machine, I do have an eth0 interface which I can set to anything I like, however it can't see my external network, or the host. I do see errors in my vmware/hostd.log which state: "The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network" which confirms the problem. vmnet-bridge is running, and I see the following in my process table: /usr/bin/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0 -i eth0 I confirm that the /var/run/vmnet-bridge-0.pid file is there and that it points to the correct process. I saw this question relating to Ubuntu 9.04 and bridged interfaces, in which the poster determined that the vsock library was not getting built due to a flaw in the vmware-config.pl script. I applied the patch, reran the script, and confirm that vsock.ko and vsock.o are in my /lib directory structure. vsock does show up in an lsmod. My /etc/vmware directory has /vmnet1 and /vmnet8 subdirectories. They contain configuration utilities for running DHCP and nat type services as expected. There is no vmnet0 subdirectory. My /etc/vmware/netmap.conf file DOES show entries for vmnet0; both the name and the device as I configured it from the script. My /dev directory contains devices vmnet0 through vmnet9. They have major device number 119, and minor device numbers 0 through 9. /proc/net/dev shows statistics for vmnet1 and vmnet8, but not vmnet0. I have a /proc/vmnet directory, but it's empty. When I start or stop the vmware service with /etc/init.d/vmware start, I see the following: Starting VMware services: Virtual machine monitor done Virtual machine communication interface done VM communication interface socket family: done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done DHCP server on /dev/vmnet1 done Host-only networking on /dev/vmnet8 (background) done DHCP server on /dev/vmnet8 done NAT service on /dev/vmnet8 done VMware Server Authentication Daemon (background) done Shared Memory Available done Starting VMware management services: VMware Server Host Agent (background) done VMware Virtual Infrastructure Web Access Starting VMware autostart virtual machines: Virtual machines done Nothing appears to be wrong there. What n00b thing am I doing such that vmnet0 and only vmnet0 does not show up in the interface list?

  Read the article

• Grub bootloader goes fail to boot in dual boot system after installing Ubuntu 12.10

  - by K.K Patel

  I had 12.04 with my dual boot system. Yesterday I downloaded Ubuntu 12.10 make bootable USB and choose Upgrade option in Installer. After installation Grub failed to boot my machine. I tried following to fix grub bootloder . Same problem I fixed with Ubuntu 12.04 using live USB but this solution not work for Ubuntu 12.10. Now coming at exactly where this solution goes fail. I followed this steps after booting Live USB and opening terminal. 1) sudo fdisk -l to see where Linux is installed 2) sudo mount /dev/sda9 /mnt where sda9 is my linux partition 3) sudo mount /dev/sda9 /mnt/boot 4) sudo mount --bind /dev /mnt/dev 5) sudo chroot /mnt (No problems with this steps done perfectly) 6) grub-install /dev/sda when I type command I got error that source_dir doesn't exist Please specify --target or --directory How can I solve this ?

  Read the article

• Error when trying to get movies off my Camera

  - by matt wilkie

  How do I retrieve movies and audio files from my Canon PowerShot S5 IS camera? Shotwell only sees the pictures. Mounting the camera via "Places Canon Digital Camera" and then clicking twice on the resulting desktop icon yields this error: could not display "gphoto2://[usb:001,002]/" There is nothing in /media. update: output of sudo fdisk -l Disk /dev/sda: 40.0 GB, 40007761920 bytes 255 heads, 63 sectors/track, 4864 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ee33ee2 Device Boot Start End Blocks Id System /dev/sda1 2364 2612 1999872 82 Linux swap / Solaris /dev/sda2 * 1 2364 18979840 83 Linux /dev/sda3 2613 4864 18089159+ f W95 Ext'd (LBA) /dev/sda5 2613 4864 18089158+ b W95 FAT32 Partition table entries are not in disk order Solution: install gphotofs, then Nautilus shows camera contents similar to a standard usb storage device (though note that gphotofs does not yet support adding to or deleting contents).

  Read the article

• How to access photos from my Genius G-Shot P7545 camera?

  - by Florin

  I have a Genius G-Shot P7545 camera. In Windows I had just to plug in the camera to the usb and acces it like a usb stick. I tried to do that in Ubuntu 10.10 with no result. How can I acces the photots? With these comands I get: lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 015: ID 0784:1692 Vivitar, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xcf5acf5a Device Boot Start End Blocks Id System /dev/sda1 * 1 2550 20478976 83 Linux /dev/sda3 2550 19458 135810048 f W95 Ext'd (LBA) /dev/sda5 2550 19458 135809024 83 Linux Unable to read /dev/sdb

  Read the article

• Ubuntu Server 13.04.3 doesn't boot w/ EFI

  - by user1004816

  I'm was actually trying to install Debian Wheezy (which failed horribly), then tried Ubuntu Server 13.04 and got the exact same problems as w/ Debian: After installing, the system doesn't show any boot-selection and tells me "Missing operating system". My setup is pretty simple: /dev/sdc - 1TB HDD (+ 3 other NTFS HDD) /dev/sdc1 - EFI, 100MiB, bootable /dev/sdc4 - ext4, 65GiB, Ubuntu/Debian (sdc2 & 3 are NTFS w/ data. Sorta lacking SATA-ports, therefore no OS-only HDD/SSD) Grub seems to be installed on /dev/sdc4, /dev/sdc1 only contains a "EFI"-folder. Not sure if thats correct. I used UNetbootin on OS X to make an 8GB USB-drive bootable and used the standard amd64-iso, running a perl-script wich eradicates a couple of naming-errors (different story). Using this tutorial and actually disabling UEFI and using legacy only dind't work either, the usb drive dind't even bother to boot. I'm pretty clueless here. I'd just like to install and use either Debian oder Ubuntu Server!

  Read the article

• Switch from encrypted partition to unencrypted (Error: cryptsetup: evms_activate is not available)

  - by Chris Lercher

  I initially installed Ubuntu 11.04 with an encrypted file system (from the alternate install CD: Guided Partitioning, LVM encrypted). Now I wanted to change this setup to have my root file system on an unencrypted partition. I had the following setup before: /dev/mapper/my-root on / type ext4 (rw,noatime,errors=remount-ro,commit=0,commit=0) /dev/sda1 on /boot type ext2 (rw,noatime) I backed up /, reformatted /dev/sda5 (which had contained the encrypted LVM device) to an ext3 partition, and restored / to that partition. I edited /etc/fstab, removed the line /dev/mapper/my-root / ..., and added the line: /dev/sda5 / ext3 noatime,rw,errors=remount-ro,commit=0 0 1 I edited /etc/crypttab, and commented out the single entry. On reboot, I get the grub screen as usual, but then I get the message cryptsetup:evms_activate is not available, waiting for encrypted source device. I tried reinstalling Grub2 using a LiveCD with the ChRoot method, but that didn't make any difference. Why is Ubuntu still searching for an encrypted device?

  Read the article

• Can't see my partitions after grub recovery

  - by dimbo

  I stupidly inserted the windows CD into my dual boot Ubuntu 11.10 / windows xp system. I just wanted to see if I could install windows on my external usb HD, but didn't actually go ahead with the install. It seems like the windows CD messed up my MBR and I had to use boot-repair and the ubuntu 11.10 live CD to gain access to ubuntu again. It seems to boot up a little differently (slower) but works. However, I now cant see any of my partitions in nautilus (there are 3). When I open gparted, it just shows my whole hard drive as unallocated (I know it has a windows partition that works and my ubuntu partition that I am using now). If I insert a usb pen, it is also not visible in nautilus but in gparted shows up as a FAT32 partition (which is correct although I cannot access it). sudo fdisk -l gives the following : demian@dimbo-TP:~$ sudo fdisk -l [sudo] password for demian: omitting empty partition (5) Disk /dev/sda: 320.1 GB, 320072933376 bytes 240 heads, 63 sectors/track, 41345 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x877b877b Device Boot Start End Blocks Id System /dev/sda1 * 63 63842309 31921123+ 7 HPFS/NTFS/exFAT /dev/sda2 63844350 133484084 34819867+ 5 Extended /dev/sda3 127636488 133484084 2923798+ 82 Linux swap / Solaris /dev/sda4 133484085 625137344 245826630 83 Linux /dev/sda5 63844352 123445247 29800448 83 Linux /dev/sda6 123447296 127635455 2094080 82 Linux swap / Solaris Disk /dev/sdb: 8100 MB, 8100249600 bytes 12 heads, 40 sectors/track, 32960 cylinders, total 15820800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 5992 15820799 7907404 c W95 FAT32 (LBA) Here is my grub.conf file. Like I said before, I had to use the 'boot-repair' utility with the live cd to get grub working again. I think that this utility maybe created a new grub for me because the startup is definitely not the same. The screen goes blank for a while, and then the ubuntu loading dots come up for a brief moment (instead of during the whole startup process) before the dektop is displayed. Anyway : # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 72A89361A89322A1 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I get things back to normal. Thanks, Demian.

  Read the article

• Subdomain redirects to different server, maintaining original URL

  - by Jason Baker

  I just took over the webmaster position in my organization, and I'm trying to set up a development environment separate from the production environment. The two environments are hosted with different companies, both on shared hosting plans. Right now, production is at domain.com and development is at domain2.com What I want is to direct my development team to dev.domain.com More importantly, I don't want the URL to change from dev.domain.com back to domain2.com, but I also be responsive to page changes. For example, if my dev team navigates from dev.domain.com to a page (called "page"), I'd like the URL to show as dev.domain.com/page Is this possible, or am I just dreaming?

  Read the article

• Can someone explain how this IOS Pan Gesture Recognition works? [on hold]

  - by user79894

  It is ios app using Pan Gesture Recognizer It works great, but I didn't get it. I wanna do some changes if the dragged UIView reaches a specific position it would call another method. Any comments are appreciated. - (IBAction)handlePan1:(UIPanGestureRecognizer *)recognizer { CGPoint translation = [recognizer translationInView:self.view]; recognizer.view.center = CGPointMake(recognizer.view.center.x + translation.x, recognizer.view.center.y + translation.y); [recognizer setTranslation:CGPointMake(0, 0) inView:self.view]; /* [x1 setText:[NSString stringWithFormat: @"%.2f", recognizer.view.center.x]]; [y1 setText:[NSString stringWithFormat: @"%.2f", recognizer.view.center.y]]; [x2 setText:[NSString stringWithFormat: @"%.2f", translation.x]]; [y2 setText:[NSString stringWithFormat: @"%.2f", translation.y]];*/ }

  Read the article

• Mounting ntfs windows drive and retrieving its data

  - by Sarmad

  Hej, A friend gave me his laptop which had problems with booting (windows). He claims his data on the drive to be retrieved and saved. I have Linux Ubuntu Server to mount its hard drive and check the contents. Now when I have mounted it I see only boot.sdi, sources, System Volume Information I have no idea why is it so? How can I access and retrieve the contents? results of sudo fdisk -l are as follows: Enhet Start Början Slut Block Id System /dev/sdb1 2048 3074047 1536000 27 Hidden NTFS WinRE /dev/sdb2 * 3074048 246945791 121935872 7 HPFS/NTFS/exFAT /dev/sdb3 246945792 416354295 84704252 7 HPFS/NTFS/exFAT /dev/sdb4 416354304 488394751 36020224 f W95 Utökad (LBA) /dev/sdb5 416356352 488394751 36019200 7 HPFS/NTFS/exFAT Please help me in this regard.

  Read the article

• Reconstructing the disk order in RAID 6 with 7 disks

  - by rkotulla

  a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of 3TB to the RAID. The QNAP internals handled the growing and re-syncing etc, and everything seemd to be perfectly fine. About 2 weeks ago, I had one of the disks (disk #5, disk #2 has gone bad in the mean time) fail, and somehow (I have no idea why), also disks 1 and 2 got kicked out of the array. I replaced disk #5, but the RAID didn't start working again. After some calls to QNAP technical support, they re-created the array (using mdadm --create --force --assume-clean ...), but the resulting array couldn't find a filesystem, and I was kindly referred to contact a data recovery company that I can't afford. After some digging through old log files, resetting the disk to factory default, etc, I found a few errors that were made during this re-create - I wish I still had some of the original metadata, but unfortunately i don't (I definitely learned that lesson). I'm currently at the point where I know the correct chunk-size (64K), metadata-version (1.0; factory default was 0.9, but from what I read 0.9 doesn't handle disks over 2 TB, mine are 3 TB), and I now find the ext4 filesystem that should be on the disks. Only variable left to determine is the right disk order! I started using the description found in answer #4 of "Recover RAID 5 data after created new array instead of re-using" but am a little confused on what the order should be for a proper RAID-6. RAID-5 is pretty well documented in a number of places, but RAID-6 much less so. Also, does the layout, i.e. distribution of parity and data chunks across the disks, change after the growing of the array from 5 to 7 disks, or does the re-sync re-organize them in such a way a native 7-disk RAID-6 would have been? Thanks some more mdadm output that might be helpful: mdadm version: [~] # mdadm --version mdadm - v2.6.3 - 20th August 2007 mdadm details from one of the disks in the array: [~] # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 1.0 Feature Map : 0x0 Array UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Name : 0 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Raid Devices : 7 Used Dev Size : 5857395112 (2793.02 GiB 2998.99 GB) Array Size : 29286975360 (13965.12 GiB 14994.93 GB) Used Size : 5857395072 (2793.02 GiB 2998.99 GB) Super Offset : 5857395368 sectors State : clean Device UUID : 7c572d8f:20c12727:7e88c888:c2c357af Update Time : Tue Jun 10 13:01:06 2014 Checksum : d275c82d - correct Events : 7036 Chunk Size : 64K Array Slot : 0 (0, 1, failed, 3, failed, 5, 6) Array State : Uu_u_uu 2 failed mdadm details for the array in the current disk-order (based on my best guess reconstructed from old log-files) [~] # mdadm --detail /dev/md0 /dev/md0: Version : 01.00.03 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Array Size : 14643487680 (13965.12 GiB 14994.93 GB) Used Dev Size : 2928697536 (2793.02 GiB 2998.99 GB) Raid Devices : 7 Total Devices : 5 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Jun 10 13:01:06 2014 State : clean, degraded Active Devices : 5 Working Devices : 5 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K Name : 0 UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Events : 7036 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 0 0 2 removed 3 8 51 3 active sync /dev/sdd3 4 0 0 4 removed 5 8 99 5 active sync /dev/sdg3 6 8 83 6 active sync /dev/sdf3 output from /proc/mdstat (md8, md9, and md13 are internally used RAIDs holding swap, etc; the one I'm after is md0) [~] # more /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdf3[6] sdg3[5] sdd3[3] sdb3[1] sda3[0] 14643487680 blocks super 1.0 level 6, 64k chunk, algorithm 2 [7/5] [UU_U_UU] md8 : active raid1 sdg2[2](S) sdf2[3](S) sdd2[4](S) sdc2[5](S) sdb2[6](S) sda2[1] sde2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdg4[3] sdf4[4] sde4[5] sdd4[6] sdc4[2] sdb4[1] sda4[0] 458880 blocks [8/7] [UUUUUUU_] bitmap: 21/57 pages [84KB], 4KB chunk md9 : active raid1 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sda1[0] sdb1[1] 530048 blocks [8/7] [UUUUUUU_] bitmap: 37/65 pages [148KB], 4KB chunk unused devices: <none>

  Read the article

• Grub2 with BURG: duplicate Windows entries, how do I remove one?

  - by Tomas Lycken

  I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >