Search Results

Search found 11540 results on 462 pages for 'gnome session'.

Page 86/462 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

  • JBoss7 load balancing with mod_proxy_balancer - session not working

    - by Phil P.
    I am trying to set up mod_proxy_balancer for routing requests to 2 jboss7-servers. For the time being I am testing this setup on my local machine, using following config in httpd.conf: ProxyRequests Off <Proxy \*> Order deny,allow Deny from all </Proxy> ProxyPass / balancer://mycluster/ stickysession=JSESSIONID|jsessionid scolonpathdelim=On <Proxy balancer://mycluster> BalancerMember http://localhost:8080 route=node1 BalancerMember http://localhost:8081 route=node2 Order allow,deny Allow from all </Proxy> and in the standalone.xml file of each jboss I have defined the jvmRoute system property: <system-properties> <property name="jvmRoute" value="node1"/> </system-properties> At http:// localhost/myapp the application is accessible but the java-session is not build up correctly. Consequently the authentication is not working. The funny thing is, that everything is working if I turn off one JBoss-instance. As I have tried a couple of settings already, I am thankful for any further suggestions.

    Read the article

  • Install IIS on Server 2003 unattended via PowerShell as a service user (no terminal session)

    - by maik
    I've been racking my brain with this for a bit and figured I would ask here to see if anyone could enlighten me. As the title says, I'm trying to install the IIS role on Server 2003 using an unattended install method launched via a service. We're using RightScale and most of what we want to accomplish is pretty straightforward. I created an unattend file for use with sysocmgr.exe: [Components] iis_common = ON iis_www = ON iis_www_vdir_scripts = ON iis_inetmgr = ON fp_extensions = ON iis_ftp = ON And I invoke it like so: sysocmgr.exe /i:%windir%\inf\sysoc.inf /u:C:\path\to\iis-unattend.txt /r /x /q If I run that from a command prompt while logged in as Administrator it works just fine, but if it runs via RightScript (the RightScale user on the server, which is a local admin) it fails somewhere in the middle and the logs I get are rather unhelpful. The thing is I can do this same thing with the SNMP Client (which is a Windows component, not a server role) and it works with no problems while run via the script service user. My best guess is that sysocmgr.exe is expecting a GUI element to be there during the role installation and since the service user has no terminal session it coughs and dies. That's just a wild stab in the dark.

    Read the article

  • Windows Remote Desktop: "configuring remote session" closes without error

    - by icelava
    I have a desktop/laptop pair at home operating x64 Windows 7 (the desktop was upgraded from Windows Vista, works just fine). I remote desktop to them on a daily basis when outside. In recent weeks, I would occasionally fail to connect to my desktop. It can connect and authenticate fine, but the "configuring remote session" dialog would simply close and not show me the desktop window or any error message. There is no error event log relating to this on the desktop computer. Some suggestions call for disabling remote audio, which mine already is, but trying different audio modes did not yield any different result. I am not too sure if this is related to video card drivers (they do get auto-updated), since remote desktop video is supposed to steer via a virtual device driver? Nonetheless the desktop operates three monitors via an ATI Radeon HD5770 (1 Displayport, 2 DVI). I do not see a real problem with that since I can mostly connect and operate it remotely. I try to "remote tunnel" via my home laptop but obviously won't work either as the problem lies in the desktop. What other conditions can cause remote desktop to break without error? UPDATE I came home and still couldn't connect to the desktop until I restarted the entire system.

    Read the article

  • Outlook locking network connection/session?

    - by HaydnWVN
    Scenario: We have an 'automatic orders' machine sat in the corner running XP with Outlook 2003. Its job is to check for new emails on a specific account, when it encounters one it checks the e-mail body for specific wording to determine which customer it is from (using a macro), then it checks the attachment for specific order codes before parsing the attachment to create a .csv file (which is then e-mailed onto one of the sales team) before importing the .csv into our bespoke ERP/Sales Order system to create an order. Problem: Periodically the machine will have symptoms of a lost network connection (unable to connect to any network source). Sometimes after several days, sometimes over a week. Volume of emails/orders processed does not seem to be linked. Additional info: The machines .pst is stored on a mapped network location. The .csv created is stored on a mapped network location. This is a workgroup, not a domain. All network drives are Samba shares from an Ubuntu fileserver. Our bespoke system runs from a database (MySQL) Ubuntu server. Our troubleshooting so far: I have switched machines (previous was Win2000) with the same symptoms. Restarting the machine FIXES the problem. Closing Outlook and then end tasking an Outlook.exe background process FIXES the problem. If you close Outlook, without end taking the background process, outlook will not reopen (saying it cannot find the pst file & it will not open any network location). Does Outlook have some kind of 'max session' linking it to network activity that is not closing after a mail request? Could Auto-archive be causing this? Is there a tool to check/display what each outlook.exe process is doing? Have not found many ways to troubleshoot this yet, as it is so infrequent...

    Read the article

  • ESXi 5 VM Putty session hangs, vSphere client timing out

    - by user192702
    First of all I believe this is a ESXi issue but let me know if you have seen this. It started about a year ago when I noticed occasionally when I putty via SSH to my VM guests, if I do anything that makes it to display a lot of things at once, the session will hang and I have to start a new one quite often only to find the same behaviour. What I meant by display a lot of things can be any of the following: 1) tail -f filename 2) Paste a long command 3) less filename If I type in one character at a time this won't happen. I tried searching online and it always point me to flow control settings and the various suggestions I've tried have never been able to resolve the issue. Since last week, I've noticed I'm not able to connect to my POP3 server from Outlook (it's timing out from Outlook's perspective). Today I tried to connect to the ESXi via vSphere client and it gives me a time out also. Exact behavior and error I saw is similar to the one posted at the following URL but the suggested technique also failed to resolve the issue. http://davidcocke.blogspot.hk/2012/02/unable-to-login-with-vsphere-client.html Has anyone experienced this before? Any suggestions on how to troubleshoot this?

    Read the article

  • PHP on several servers with session-sharing

    - by Etu
    there's certanly other threads about this, but I have one more question. We are about to scale the website at work to have more than one server. And we need to share the sessions between the servers. We have been looking into different solutions, one in memcached and use Memcached as sessionhandler in PHP. That will probably work. And the idea would be to run memcached on every machine and let all webservers access all other servers memcached servers, and then we have shared sessions between the machines, yay. (we have no resources to setup with sticky-sessions yet, that's a later project. we need this running, and we need this running now. and we will loadbalance with DNS for a starter) But then... If I want to take one server down, say, for maintenance, or a server crashes, or whatever reason. I don't want the users to just loose their sessions and have to start from the beginning... That's why we need some kind of replication, which Memcached does not support. Then I found http://repcached.lab.klab.org/ -- which has multi-master replication of memcached, which is great, and is what I want. But does it work with 2 machines? Say 3, 5, 10? For future scaling. I also looked into redishttp://redis.io/ -- which also seems great, but is a bit more "shaky" with the php-session-handler support, and no multi-master-replication. The thing is that I like to use memcached, but I want to be able to power down one of two boxes without loosing half of the sessions. Any suggestions?

    Read the article

  • Is it possible to use the Volume Notifications from Gnome Shell in XFCE?

    - by Uri Herrera
    I somehow had them working before in 11.10 but I don't really remember what did I do back then other than activating "load Gnome components on start up" in the XFCE's settings manager. I've tried the same in 12.04 but doesn't seem to do anything, I specifically ask for the Volume notifications as other notifications used notify-osd or xfce4-notifyd but the volume one was Gnome's (I found that later) As far as I know it uses notification-daemonbut installing it instead of the other two doesn't give me the correct notifications. I'm using XFCE 4.10

    Read the article

  • Sortie d'OpenSuse 12.1 : GNOME 3.2, KDE 4.7, Go, support amélioré du Cloud et la virtualisation plus stable et flexible

    Sortie d'OpenSuse 12.1 : GNOME 3.2, KDE 4.7, Go support amélioré du Cloud et la virtualisation pour l'OS plus stable et flexible Une nouvelle version majeure de la distribution Linux OpenSuse est disponible. Après plus de huit mois de travaux, la version 12.1 du système d'exploitation qui vient d'être publiée apporte un nombre impressionnant de nouveautés avec un support du Cloud et de la virtualisation. L'OS basé sur le noyau Linux 3.1, embarque l'environnement de bureau GNOME Shell 3.2, avec une meilleure gestion des écrans plus petits, des configurations multiécrans, de meilleures notifications et un système centralisé de configuration de comptes en ligne.

    Read the article

  • Sharing the same `ssh-agent` among multiple login sessions

    - by intuited
    Is there a convenient way to ensure that all logins from a given user (ie me) use the same ssh-agent? I hacked out a script to make this work most of the time, but I suspected all along that there was some way to do it that I had just missed. Additionally, since that time there have been amazing advances in computing technology, like for example this website. So the goal here is that whenever I log in to the box, regardless of whether it's via SSH, or in a graphical session started from gdm/kdm/etc, or at a console: if my username does not currently have an ssh-agent running, one is started, the environment variables exported, and ssh-add called. otherwise, the existing agent's coordinates are exported in the login session's environment variables. This facility is especially valuable when the box in question is used as a relay point when sshing into a third box. In this case it avoids having to type in the private key's passphrase every time you ssh in and then want to, for example, do git push or something. The script given below does this mostly reliably, although it botched recently when X crashed and I then started another graphical session. There might have been other screwiness going on in that instance. Here's my bad-is-good script. I source this from my .bashrc. # ssh-agent-procure.bash # v0.6.4 # ensures that all shells sourcing this file in profile/rc scripts use the same ssh-agent. # copyright me, now; licensed under the DWTFYWT license. mkdir -p "$HOME/etc/ssh"; function ssh-procure-launch-agent { eval `ssh-agent -s -a ~/etc/ssh/ssh-agent-socket`; ssh-add; } if [ ! $SSH_AGENT_PID ]; then if [ -e ~/etc/ssh/ssh-agent-socket ] ; then SSH_AGENT_PID=`ps -fC ssh-agent |grep 'etc/ssh/ssh-agent-socket' |sed -r 's/^\S+\s+(\S+).*$/\1/'`; if [[ $SSH_AGENT_PID =~ [0-9]+ ]]; then # in this case the agent has already been launched and we are just attaching to it. ##++ It should check that this pid is actually active & belongs to an ssh instance export SSH_AGENT_PID; SSH_AUTH_SOCK=~/etc/ssh/ssh-agent-socket; export SSH_AUTH_SOCK; else # in this case there is no agent running, so the socket file is left over from a graceless agent termination. rm ~/etc/ssh/ssh-agent-socket; ssh-procure-launch-agent; fi; else ssh-procure-launch-agent; fi; fi; Please tell me there's a better way to do this. Also please don't nitpick the inconsistencies/gaffes ( eg putting var stuff in etc ); I wrote this a while ago and have since learned many things.

    Read the article

  • Lazy loading of child throwing session error

    - by Thomas Buckley
    I'm the following error when calling purchaseService.updatePurchase(purchase) inside my TagController: SEVERE: Servlet.service() for servlet [PurchaseAPIServer] in context with path [/PurchaseAPIServer] threw exception [Request processing failed; nested exception is org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: com.app.model.Purchase.tags, no session or session was closed] with root cause org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: com.app.model.Purchase.tags, no session or session was closed at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationException(AbstractPersistentCollection.java:383) at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationExceptionIfNotConnected(AbstractPersistentCollection.java:375) at org.hibernate.collection.AbstractPersistentCollection.initialize(AbstractPersistentCollection.java:368) at org.hibernate.collection.PersistentSet.add(PersistentSet.java:212) at com.app.model.Purchase.addTags(Purchase.java:207) at com.app.controller.TagController.createAll(TagController.java:79) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.web.method.support.InvocableHandlerMethod.invoke(InvocableHandlerMethod.java:212) at org.springframework.web.method.support.InvocableHandlerMethod.invokeForRequest(InvocableHandlerMethod.java:126) at org.springframework.web.servlet.mvc.method.annotation.ServletInvocableHandlerMethod.invokeAndHandle(ServletInvocableHandlerMethod.java:96) at org.springframework.web.servlet.mvc.method.annotation.RequestMappingHandlerAdapter.invokeHandlerMethod(RequestMappingHandlerAdapter.java:617) at org.springframework.web.servlet.mvc.method.annotation.RequestMappingHandlerAdapter.handleInternal(RequestMappingHandlerAdapter.java:578) at org.springframework.web.servlet.mvc.method.AbstractHandlerMethodAdapter.handle(AbstractHandlerMethodAdapter.java:80) at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:900) at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:827) at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:882) at org.springframework.web.servlet.FrameworkServlet.doPost(FrameworkServlet.java:789) at javax.servlet.http.HttpServlet.service(HttpServlet.java:641) at javax.servlet.http.HttpServlet.service(HttpServlet.java:722) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:225) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:927) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:407) at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:999) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:565) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:309) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) TagController: @RequestMapping(value = "purchases/{purchaseId}/tags", method = RequestMethod.POST, params = "manyTags") @ResponseStatus(HttpStatus.CREATED) public void createAll(@PathVariable("purchaseId") final Long purchaseId, @RequestBody final Tag[] entities) { Purchase purchase = purchaseService.getById(purchaseId); Set<Tag> tags = new HashSet<Tag>(Arrays.asList(entities)); purchase.addTags(tags); purchaseService.updatePurchase(purchase); } Purchase: @Entity @XmlRootElement public class Purchase implements Serializable { /** * */ private static final long serialVersionUID = 6603477834338392140L; @Id @GeneratedValue(strategy = GenerationType.AUTO) private Long id; @OneToMany(mappedBy = "purchase", fetch = FetchType.LAZY, cascade={CascadeType.ALL}) private Set<Tag> tags; @JsonIgnore public Set<Tag> getTags() { if (tags == null) { tags = new LinkedHashSet<Tag>(); } return tags; } public void setTags(Set<Tag> tags) { this.tags = tags; } ... } Tag: @Entity @XmlRootElement public class Tag implements Serializable { /** * */ private static final long serialVersionUID = 5165922776051697002L; @Id @GeneratedValue(strategy = GenerationType.AUTO) private Long id; @ManyToOne(fetch = FetchType.LAZY) @JoinColumns({@JoinColumn(name = "PURCHASEID", referencedColumnName = "ID")}) private Purchase purchase; @JsonIgnore public Purchase getPurchase() { return purchase; } public void setPurchase(Purchase purchase) { this.purchase = purchase; } } PurchaseService: @Service public class PurchaseService implements IPurchaseService { @Autowired private IPurchaseDAO purchaseDAO; public PurchaseService() { } @Transactional public List<Purchase> getAll() { return purchaseDAO.findAll(); } @Transactional public Purchase getById(Long id) { return purchaseDAO.findOne(id); } @Transactional public void addPurchase(Purchase purchase) { purchaseDAO.save(purchase); } @Transactional public void updatePurchase(Purchase purchase) { purchaseDAO.update(purchase); } } TagService: @Service public class TagService implements ITagService { @Autowired private ITagDAO tagDAO; public TagService() { } @Transactional public List<Tag> getAll() { return tagDAO.findAll(); } @Transactional public Tag getById(Long id) { return tagDAO.findOne(id); } @Transactional public void addTag(Tag tag) { tagDAO.save(tag); } @Transactional public void updateTag(Tag tag) { tagDAO.update(tag); } } Any ideas on how I can fix this? (I want to avoid using EAGER loading). Do I need to setup some form of session management for transactions? Thanks

    Read the article

  • Session caching problem

    - by Levani
    I have a strange problem with php sessions. I use them for authorization on my site. I store two variables - currently logged in user's id and username in session. When I log in with one username, than log out and log in again with another username the previous user's id is returned using the session variable instead of the current user. The most strange thing is that this happens only when it comes to insert some data into database. When I directly echo this variable the correct id is displayed, but when I insert new record into database this variable sends incorrect id. Here is the php code I use for sending data into database: <?php session_start(); //connect database require_once 'dbc.php'; $authorID = $_SESSION['user_id']; if ( $authorID != 0 ) { $content = htmlentities($_POST["answ_content"],ENT_COMPAT,'UTF-8'); $dro = date('Y-m-d H:i:s'); $qID = $_POST["question_ID"]; $author = 'avtori'; $sql="INSERT INTO comments (comment_ID, comment_post_ID, comment_author, comment_date, comment_content, user_id) VALUES (NULL, '$qID', '$author', '$dro', '$content', '$authorID')"; $result = mysql_query($sql); } else { echo 'error'; } ?> Can anyone please help? Here is the logout function: function logout() { global $db; session_start(); if(isset($_SESSION['user_id']) || isset($_COOKIE['user_id'])) { mysql_query("update `users` set `ckey`= '', `ctime`= '' where `id`='$_SESSION[user_id]' OR `id` = '$_COOKIE[user_id]'") or die(mysql_error()); } /************ Delete the sessions****************/ unset($_SESSION['user_id']); unset($_SESSION['user_name']); unset($_SESSION['user_level']); unset($_SESSION['HTTP_USER_AGENT']); session_unset(); session_destroy(); /* Delete the cookies*******************/ setcookie("user_id", '', time()-60*60*24*COOKIE_TIME_OUT, "/"); setcookie("user_name", '', time()-60*60*24*COOKIE_TIME_OUT, "/"); setcookie("user_key", '', time()-60*60*24*COOKIE_TIME_OUT, "/"); header("Location: index.php"); } Here is the authentication script: include 'dbc.php'; $err = array(); foreach($_GET as $key => $value) { $get[$key] = filter($value); //get variables are filtered. } if ($_POST['doLogin']=='Login') { foreach($_POST as $key => $value) { $data[$key] = filter($value); // post variables are filtered } $user_email = $data['usr_email']; $pass = $data['pwd']; if (strpos($user_email,'@') === false) { $user_cond = "user_name='$user_email'"; } else { $user_cond = "user_email='$user_email'"; } $result = mysql_query("SELECT `id`,`pwd`,`full_name`,`approved`,`user_level` FROM users WHERE $user_cond AND `banned` = '0' ") or die (mysql_error()); $num = mysql_num_rows($result); // Match row found with more than 1 results - the user is authenticated. if ( $num > 0 ) { list($id,$pwd,$full_name,$approved,$user_level) = mysql_fetch_row($result); if(!$approved) { //$msg = urlencode("Account not activated. Please check your email for activation code"); $err[] = "Account not activated. Please check your email for activation code"; //header("Location: login.php?msg=$msg"); //exit(); } //check against salt if ($pwd === PwdHash($pass,substr($pwd,0,9))) { // this sets session and logs user in session_start(); session_regenerate_id (true); //prevent against session fixation attacks. // this sets variables in the session $_SESSION['user_id']= $id; $_SESSION['user_name'] = $full_name; $_SESSION['user_level'] = $user_level; $_SESSION['HTTP_USER_AGENT'] = md5($_SERVER['HTTP_USER_AGENT']); //update the timestamp and key for cookie $stamp = time(); $ckey = GenKey(); mysql_query("update users set `ctime`='$stamp', `ckey` = '$ckey' where id='$id'") or die(mysql_error()); //set a cookie if(isset($_POST['remember'])){ setcookie("user_id", $_SESSION['user_id'], time()+60*60*24*COOKIE_TIME_OUT, "/"); setcookie("user_key", sha1($ckey), time()+60*60*24*COOKIE_TIME_OUT, "/"); setcookie("user_name",$_SESSION['user_name'], time()+60*60*24*COOKIE_TIME_OUT, "/"); } if(empty($err)){ header("Location: myaccount.php"); } } else { //$msg = urlencode("Invalid Login. Please try again with correct user email and password. "); $err[] = "Invalid Login. Please try again with correct user email and password."; //header("Location: login.php?msg=$msg"); } } else { $err[] = "Error - Invalid login. No such user exists"; } }

    Read the article

  • The server rejected the session-establishment request: WCF hosted on IIS

    - by Dave Hanna
    Background: I'm working on a project where we have about a dozen distinct WCF services implemented in an IIS application, communicating over net.tcp on the default port (808), using the Microsoft Net.Tcp Port Sharing Service. I recently added a self-test method to the base class of each of these services so that I could remotely hit the service and get back a status string verifying that it was in operation. We implement this app in a ladder of environments - Development, QA, UAT, and finally production. My problem: My test program, which instantiates a connection to each service in turn and invokes the self-test method, works fine on all the environments below production. We recently moved the app to production, and I'm getting a weird error that I can't explain: On the first of the services that I hit, I get back an exception: "The server at [URL] rejected the session-establishment request". All the other services respond fine. I initially thought there was something wrong with the particular service that was failing, but I tried rearranging the list of services into a different order, and it SEEMS to always be the first service that I hit that fails. (I say SEEMS because it think once in the early iterations of testing, I saw it happen on the second service that it hit. But I haven't been able to reproduce that.) I've looked at application startup delays, and that doesn't seem to be the problem, because I can come back and run the test again as soon as it finishes - a delay of only a minute or two - and get the same error. Also, in the lower level environments, there is a start up delay of probably 30 seconds to a minute, but the result still comes back as expected. I've tried accessing the services over http from INetManager, and I get intermittent failures on all the services - a particular service will return a yellow screen of death on on invocation, then come up with the expected link to the WSDL on the next one seconds later. I'm completely at a loss to explain this behavior, or how to resolve it. I've googled the error message, and not found anything helpful. It may be a configuration issue - the production servers are newly provisioned VM's, and we may not have the config exactly right (whereas all the lower level environments have been running this and other similar apps for some time), but I have not idea what to look for. I've looked at the properties of the app pool that the app is running on and compared it to the lower level environments without finding any differences. If somebody can point me in the right direction, you would have my undying gratitude.

    Read the article

  • Losing sessions on GlassFish

    - by synti
    I have a web application that logs users in a @SessionScoped managed bean. It's all the basic stuff, pretty much like this: users logs in using regular http form and gets redirect to user area (wich is protected using a filter). But if any resource on that area is accessed, the request somehow uses a new session, wich has no managed bean, no user, and the filter does his job, redirecting him to login page. Here's the login form: <h:form> <h:outputLabel for="email" value="Email "/> <p:inputText id="email" size="30" value="#{loginManager.email}"/> <h:outputLabel for="password" value="Password "/> <p:password id="password" size="12" value="#{loginManager.password}"/> <p:commandButton value="Login" action="#{loginManager.login()}"/> </h:form> The loginManager managed bean: @ManagedBean @SessionScoped public class LoginManager implements Serializable { @EJB private UserService userService; private User user; private String email; private String password; public String login() { user = userService.findBy(email, password); if (user == null) { // FacesMessage stuff } else { return "/user/welcome.xhtml?faces-redirect=true"; } } public String logout() { FacesContext.getCurrentInstance().getExternalContext().invalidateSession(); return "/index.xhtml?faces-redirect=true"; } // Getters, setters (no setter for user) and serialVersionUID And then comes the filter that protects the user area: @WebFilter(urlPatterns="/user/*", displayName="UserFilter") public class UserFilter implements Filter { @Override public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws IOException, ServletException { HttpSession session = ((HttpServletRequest)request).getSession(false); LoginManager loginManager = (LoginManager) session.getAttribute("loginManager"); if (loginManager == null || !loginManager.hasUser()) { HttpServletResponse resp = (HttpServletResponse) response; resp.sendRedirect("index.xhtml"); } final User user = loginManager.getUser(); if (user.isValid()) { chain.doFilter(request, response); } else { HttpServletResponse resp = (HttpServletResponse) response; resp.sendRedirect("index.xhtml"); } } The UserService is just a stateless EJB that handles persistence. Part of the JSF for user area: <h:form> <p:panelMenu> <p:submenu label="Items"> <p:menuitem value="Add item" action="#{userItens.addItems}" ajax="false"/> <p:menuitem value="My items" /> </p:submenu> </p:panelMenu> </h:form> And finally the userItens managed bean. @ManagedBean @RequestScoped public class UserItens { private User user; @PostConstruct private void init() { HttpSession session = (HttpSession) FacesContext.getCurrentInstance() .getExternalContext().getSession(false); LoginManager loginManager = (LoginManager) session.getAttribute("loginManager"); if (loginManager != null) user = loginManager.getUser(); } public String addItems() { // Doesn't get here. Seems like UserFilter comes first, doesn't find // an user and redirects. } I'm using glassfish and session timeout is now on 0.

    Read the article

  • Timeout settings for Remote Desktop Sessions to lock

    - by atroon
    Our office uses a Windows 2003 server to provide access to an accounting application. Recently I was asked to increase the amount of time it takes for the session to lock itself and require the entry of the user's password to resume. That seems to be about ten minutes, at present. I am familiar with group policy and have tweaked those settings to scavenge sessions (and thereby licenses) from sessions that have been disconnected (by the user closing the mstsc.exe client or by a network issue). That's simple and straightforward. But I can't find anything in GP to allow a longer time period before the RDP client window goes black and then, when clicked upon, requires a username and password to resume the session. I must admit this would be nice personally as well, since most of my time is spent documenting the application and/or monitoring its database, so I usually have a window open to the terminal server along with the rest of the staff in the accounting center, but I interact with it very little. I usually enter my password 10-15 times per workday, but I'm pretty good at it by now. ;) So, can this timeout period be adjusted, or are we out of luck?

    Read the article

  • Creating a session scoped bean in Google App Engine using Spring 2.5

    - by zfranciscus
    Hi, I am trying to create a session bean in spring mvc. I am having the following error message when I run my google app engine server in my local box: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'siteController' defined in ServletContext resource [/WEB-INF/springapp-servlet.xml]: Cannot resolve reference to bean 'oAuth' while setting bean property 'oAuth'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'oAuth' defined in BeanDefinition defined in ServletContext resource [/WEB-INF/springapp-servlet.xml]: Initialization of bean failed; nested exception is org.springframework.aop.framework.AopConfigException: **Cannot proxy target class because CGLIB2 is not available. Add CGLIB to the class path or specify proxy interfaces.** This is my spring mvc configuration: <bean name="oAuth" class="org.locate.server.FoursquareMgr" scope="session"> <aop:scoped-proxy/> </bean> <bean name="siteController" class="org.locate.server.SiteController" > <property name="oAuth" ref="oAuth"></property> </bean> I have enabled session in my google app engine appengine-web.xml file <sessions-enabled>true</sessions-enabled> I have included CGLIB2: cglib-2.1_3.jar and cglib-nodep-2.1_3.jar in my eclipse project build path. Has any one encountered this problem before ?

    Read the article

  • WCF: Per-Call and Per-Session services...need convincing that Per-Call is worthwhile

    - by mrlane
    Hello all. We are currently doing a review of our WCF service design and one thing that is bothering me is the decision between Per-Call and Per-Session services. I believe I understand the concept behind both, but I am not really seeing the advantage of Per-Call services. I understand that the motivation for using Per-Call services is that a WCF services only holds a servier object for the life of a call thereby restricting the time that an expensive resource is held by the service instance, but to me its much simpler to use the more OO like Per-Session model where your proxy object instance always corrisponds to the same server object instance and just handle any expensive resources manually. For example, say I have a CRUD Service with Add, Update, Delete, Select methods on it. This could be done as a Per-Call service with database connection (the "expensive resource") instanciated in the server object constructor. Alternately it could be a Per-Session service with a database connection instanciated and closed within each CRUD method exposed. To me it is no different resource wise and it makes the programming model simpler as the client can be assured that they always have the same server object for their proxies: any in-expensive state that there may be between calls is maintained and no extra parameters are needed on methods to identify what state data must be retrieved by the service when it is instanciating a new server object again (as in the case of Per-Call). Its just like using classes and objects, where the same resource management issues apply, but we dont create new object instances for each method call we have on an object! So what am I missing with the Per-Call model? Thanks

    Read the article

  • Glassfish: Defining Custom JNDI Names for Session Beans

    - by Adeel Ansari
    Background: Want to use GF3 in development, where as actual SIT, UAT, and production is using WAS. Problem: With the remote session beans everything is good to go, as GF3 gives a non-standard JNDI name, which is same as what WAS suggests, i.e. an absolute class name. Now for the local session beans WAS use the same absolute class name but with the prefix, i.e. ejblocal:. Whereas GF3 doesn't give any non-standard JNDI name for local session beans. GF3 came up with only portable name, java:global/..I need to find a way so I can use the same names for both. I am using EJB 3.0, WAS 7.9, and Glassfish 3. Don't have any xml confiuration for ejbs. Using Spring to inject the bean in Struts2 actions. With remote interfaces both servers are okay and agreed on a single convention, but for locals they differ. Is there any solution for this? Or just sun-ejb-jar.xml will solve it? Thanks.

    Read the article

  • Storing multiple inputs with the same name in a CodeIgniter session

    - by Joshua Cody
    I've posted this in the CodeIgniter forum and exhausted the forum search engine as well, so apologies if cross-posting is frowned upon. Essentially, I've got a single input, set up as <input type="text" name="goal">. At a user's request, they may add another goal, which throws a duplicate to the DOM. What I need to do is grab these values in my CodeIgniter controller and store them in a session variable. My controller is currently constructed thusly: function goalsAdd(){ $meeting_title = $this->input->post('topic'); $meeting_hours = $this->input->post('hours'); $meeting_minutes = $this->input->post('minutes'); $meeting_goals = $this->input->post('goal'); $meeting_time = $meeting_hours . ":" . $meeting_minutes; $sessionData = array( 'totaltime' => $meeting_time, 'title' => $meeting_title, 'goals' => $meeting_goals ); $this->session->set_userdata($sessionData); $this->load->view('test', $sessionData); } Currently, obviously, my controller gets the value of each input, writing over previous values in its wake, leaving only a string of the final value. I need to store these, however, so I can print them on a subsequent page. What I imagine I'd love to do is extend the input class to be able to call $this-input-posts('goal'). Eventually I will need to store other arrays to session values. But I'm totally open to implementation suggestion. Thanks so much for any help you can give.

    Read the article

  • how to intercept processing when Session.IsNewSession is true

    - by Cen
    I have a small 4-page application for my customers to work through. They fill out information. If they let it sit too long, and the Session timeout out, I want to pop up a javascript alert that their session has expired, and that they need to start over. At that point, then redirected to the beginning page of the application. I'm getting some strange behavior. I'm stepping through code, forcing my Sessioni.IsNewSession to be true. At this point, I write out a call to Javascript to a Literal Control placed at the bottom of the . The javascript is called, and the redirection occurs. However, what is happening is.. I am pressing a button which is more or less a "Next Page" button and triggering this code. The next page is being displayed, and then the Alert and redirection occurs. The result I was expecting was to stay on the same page I received the "Timeout", with the alert to pop-up over it, then redirection. I'm checking for Session.IsNewSession in a BaseClass for these pages, overriding the OnInit event. Any ideas why I am getting this behavior? Thanks!

    Read the article

  • Why can't I access the facebook friends list after reopening a session in ios

    - by user1532390
    I am upgrading to the facebook 3.0 sdk for ios. Things went well, until I tried to open an existing session after relaunching the application. I am trying to access the list of friends for the facebook user. if ([[FBSession activeSession] isOpen]) { [request startWithCompletionHandler:^(FBRequestConnection *connection, id result, NSError *error) { //do something here }]; }else{ [[self session] openWithCompletionHandler:^(FBSession *session, FBSessionState status, NSError *error) { if ([self isValid]) { [request startWithCompletionHandler:^(FBRequestConnection *connection, id result, NSError *error) { //log this error we always get NSLog(@"%@",error); //do something else }]; } }]; } However I get this error: Error Domain=com.facebook.sdk Code=5 "The operation couldn’t be completed. (com.facebook.sdk error 5.)" UserInfo=0x1d92ff40 {com.facebook.sdk:ParsedJSONResponseKey={ body = { error = { code = 2500; message = "An active access token must be used to query information about the current user."; type = OAuthException; }; }; code = 400; }, com.facebook.sdk:HTTPStatusCode=400} I've found that if I use the FBSession reauthorize method it allows me to complete the request without error, but it also means I must show UI or switch apps every time we relaunch the application which is unacceptable. Any suggestions on what I should be doing differently?

    Read the article

  • Same session and session ID for different subdomains in Grails project - How can I do that?

    - by fluxon
    I am currently working on a project that supports multiple languages. In order to be seo friendly, I am trying to redirect users subdomains corresponding to their locale (or their preferred language). I.e., my projects's url is mydomain.com and I work with the subdomains en.mydomain.com, es.mydomain.com, de.mydomain.com, fr.mydomain.com ... you get the idea. All subdomains are served by the same grails app for now. What happens is that my grails project maintains different sessions (as seen by the session ids) for every single subdomain, hence information is lost, when a user switches between languages. I had not forseen that. :( How can I explicitly set the session identifier? I would like it to be based on just mydomain.com. I got the hint that Apache Tomcat offers something like <Context sessionCookiePath="/" sessionCookieDomain=".mydomain.com"> , but that does not help for the devel environment etc. Any hints? Have you tried storing session information in the DB? This is sometimes used for load-balancing purposes and might help here as well?! Help is highly appreciated (as always)! Cheers!

    Read the article

  • Request header field x-user-session is not allowed by Access-Control-Allow-Headers

    - by Saurabh Bhandari
    I am trying to do a CORS call to a WCF service endpoint hosted on IIS7.5. I have configured custom headers in IIS. My configuration looks like below <customHeaders> <add name="Access-Control-Allow-Methods" value="GET,PUT,POST,DELETE,OPTIONS" /> <add name="Access-Control-Allow-Headers" value="x-user-session,origin, content-type, accept" /> <add name="Access-Control-Allow-Credentials" value="true" /> </customHeaders> When I do a POST request I get following error message "Request header field x-user-session is not allowed by Access-Control-Allow-Headers" If I remove my custom header from the call and run it, everything works fine. Also if I do a GET call with custom header then also API works correctly. $.ajax({ type:"POST", success: function(d) { console.log(d) }, timeout: 9000, url: "http://api.myserver.com/Services/v2/CreditCard.svc/update_cc_detail", data: JSON.stringify({"card_id": 1234,"expire_month":"11","expire_year":"2020","full_name":"Demo Account", "number":"4111111111111111","is_primary":true}), xhrFields: { withCredentials: true}, headers: { x-user-session': "B23680D0B8CB5AFED9F624271F1DFAE5052085755AEDDEFDA3834EF16115BCDDC6319BD79FDCCB1E199BB6CC4D0C6FBC9F30242A723BA9C0DFB8BCA3F31F4C7302B1A37EE0A20C42E8AFD45FAB85282FCB62C0B4EC62329BD8573FEBAEBC6E8269FFBF57C7D57E6EF880E396F266E7AD841797792619AD3F1C27A5AE" }, crossDomain: true, contentType: 'application/json' });

    Read the article

  • Checking servlet session attribute value in jsp file

    - by Marta
    I have a no framework java application. It consists of jsp files for view and servlets for the business logic. I must set the user session is the servlet with a firstName parameter. In the jsp file, I need to check if my firstName parameter has a value or not. If the firstName parameter is set, I need to display some html in the jsp file. If it is not set, I need to display different html in the jsp file. Servlet.java: HttpSession session = request.getSession(); session.setAttribute("firstName", customer.getFristName()); String url = "/index.jsp"; RequestDispatcher dispatcher = getServletContext().getRequestDispatcher(url); dispatcher.forward(request, response); header.jsp: // Between the <p> tags bellow I need to put some HTML with the following rules // If firstName exist: Hello ${firstName} <a href="logout.jsp">Log out</a> // Else: <a href="login.jsp">Login</a> or <a href="register.jsp">Register</a> <p class="credentials" id="cr"></p> What would be the best way to do this? Any help is much appreciated! Thank you in advance. -Marta

    Read the article

  • WordPress Write Cache Problem with Multiple Sessions

    - by Volomike
    I'm working on a content dripper custom plugin in WordPress that my client asked me to build. He says he wants it to catch a page view event, and if it's the right time of day (24 hours since last post), to pull from a resource file and output another post. He needed it to also raise a flag and prevent other sessions from firing that same snippet of code. So, raise some kind of flag saying, "I'm posting that post, go away other process," and then it makes that post and releases the flag again. However, the strangest thing is occurring when placed under load with multiple sessions hitting the site with page views. It's firing instead of one post -- it's randomly doing like 1, 2, or 3 extra posts, with each one thinking that it was the right time to post because it was 24 hours past the time of the last post. Because it's somewhat random, I'm guessing that the problem is some kind of write caching where the other sessions don't see the raised flag just yet until a couple microseconds pass. The plugin was raising the "flag" by simply writing to the wp_options table with the update_option() API in WordPress. The other user sessions were supposed to read that value with get_option() and see the flag, and then not run that piece of code that creates the post because a given session was already doing it. Then, when done, I lower the flag and the other sessions continue as normal. But what it's doing is letting those other sessions in. To make this work, I was using add_action('loop_start','checkToAddContent'). The odd thing about that function though is that it's called more than once on a page, and in fact some plugins may call it. I don't know if there's a better event to hook. Even still, even if I find an event to hook that only runs once on a page view, I still have multiple sessions to contend with (different users who may view the page at the same time) and I want only one given session to trigger the content post when the post is due on the schedule. I'm wondering if there are any WordPress plugin devs out there who could suggest another event hook to latch on to, and to figure out another way to raise a flag that all sessions would see. I mean, I could use the shared memory API in PHP, but many hosting plans have that disabled. Can't use a cookie or session var because that's only one single session. About the only thing that might work across hosting plans would be to drop a file as a flag, instead. If the file is present, then one session has the flag. If the file is not present, then other sessions can attempt to get the flag. Sure, I could use the file route, but it's kind of immature in my opinion and I was wondering if there's something in WordPress I could do.

    Read the article

  • Cannot start session without errors in phpMyAdmin running Nginx with PHP-FPM

    - by Infinity
    Whenever I open phpMyAdmin from my VPS I get the following error: Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly. I have researched it, but cant seem to find a solution, I have done the following: Cleared cache and cookies Checked the php.ini (see below) Checked the logs (found nothing relevant) Given the correct permissions. [by sudo chown -R root:nginx /home/humza/pma] I am running Nginx with PHP-FPM, I have php-mysql and all that working fine but I can't get phpMyAdmin to work. I downloaded it off phpMyAdmin's website and extracted it, that's all. http://pastebin.com/raw.php?i=6n57cW8H - my php.ini sessions bit http://pastebin.com/raw.php?i=VaNP2TLi - my whole php.ini None of my logs have anything relevant. My error logs have other PHP errors but not this one and my access logs don't have anything either. I have checked my nginx logs and my PHP-FPM logs. I tried installing phpMyAdmin via yum and got a whole lot of dependency errors. [root@infinity ~]# yum install phpmyadmin Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package phpMyAdmin.noarch 0:2.11.11.3-1.el5 set to be updated --> Processing Dependency: php-mcrypt >= 4.1.0 for package: phpMyAdmin --> Processing Dependency: php >= 4.1.0 for package: phpMyAdmin --> Processing Dependency: php-mbstring >= 4.1.0 for package: phpMyAdmin --> Running transaction check ---> Package php.i386 0:5.1.6-27.el5_5.3 set to be updated --> Processing Dependency: php-common = 5.1.6-27.el5_5.3 for package: php --> Processing Dependency: php-cli = 5.1.6-27.el5_5.3 for package: php ---> Package php-mbstring.i386 0:5.1.6-27.el5_5.3 set to be updated --> Processing Dependency: php-common = 5.1.6-27.el5_5.3 for package: php-mbstring ---> Package php-mcrypt.i386 0:5.1.6-15.el5.centos.1 set to be updated --> Processing Dependency: php-api = 20041225 for package: php-mcrypt --> Running transaction check ---> Package php.i386 0:5.1.6-27.el5_5.3 set to be updated --> Processing Dependency: php-common = 5.1.6-27.el5_5.3 for package: php ---> Package php-cli.i386 0:5.1.6-27.el5_5.3 set to be updated --> Processing Dependency: php-common = 5.1.6-27.el5_5.3 for package: php-cli ---> Package php-mbstring.i386 0:5.1.6-27.el5_5.3 set to be updated --> Processing Dependency: php-common = 5.1.6-27.el5_5.3 for package: php-mbstring ---> Package php-mcrypt.i386 0:5.1.6-15.el5.centos.1 set to be updated --> Processing Dependency: php-api = 20041225 for package: php-mcrypt --> Finished Dependency Resolution php-5.1.6-27.el5_5.3.i386 from base has depsolving problems --> Missing Dependency: php-common = 5.1.6-27.el5_5.3 is needed by package php-5.1.6-27.el5_5.3.i386 (base) php-cli-5.1.6-27.el5_5.3.i386 from base has depsolving problems --> Missing Dependency: php-common = 5.1.6-27.el5_5.3 is needed by package php-cli-5.1.6-27.el5_5.3.i386 (base) php-mbstring-5.1.6-27.el5_5.3.i386 from base has depsolving problems --> Missing Dependency: php-common = 5.1.6-27.el5_5.3 is needed by package php-mbstring-5.1.6-27.el5_5.3.i386 (base) php-mcrypt-5.1.6-15.el5.centos.1.i386 from extras has depsolving problems --> Missing Dependency: php-api = 20041225 is needed by package php-mcrypt-5.1.6-15.el5.centos.1.i386 (extras) Error: Missing Dependency: php-api = 20041225 is needed by package php-mcrypt-5.1.6-15.el5.centos.1.i386 (extras) Error: Missing Dependency: php-common = 5.1.6-27.el5_5.3 is needed by package php-cli-5.1.6-27.el5_5.3.i386 (base) Error: Missing Dependency: php-common = 5.1.6-27.el5_5.3 is needed by package php-5.1.6-27.el5_5.3.i386 (base) Error: Missing Dependency: php-common = 5.1.6-27.el5_5.3 is needed by package php-mbstring-5.1.6-27.el5_5.3.i386 (base) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. [root@infinity ~]# Any ideas?

    Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >