Search Results

Search found 36645 results on 1466 pages for 'local content'.

Page 86/1466 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

  • Force local IP traffic to an external interface

    - by calandoa
    I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to forward all the traffic sent to one of these local addresses through the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 should be not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. May be I could then do NAT forwarding of all traffic directed to fake 192.168.1.2 on eth1, rerouted to 192.168.1.1 internally? I am actually struggling with iptables, but it is too tough for me. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

    Read the article

  • VPN - local and remote networks IP collision

    - by Guido García
    I have created a VPN connection in Windows using the New Network Connection wizard that comes with Windows. It works without problems in most places, but there is one concrete place where, despite the connection to the remote public IP works fine, it is not able to validate the login/password and establish the VPN connection. In this place, the network is 10.0.0.x (the same I use in other places where I am able to connect). The remote network is 192.168.x.x, so I suspect there is some kind of IP collision, because before connecting, a traceroute to i.e. 192.168.0.40 does not fail. 1 4 ms 1 ms 1 ms LINKSYS [10.0.0.1] 2 5 ms 1 ms 1 ms 172.26.27.1 3 4 ms 5 ms 3 ms 192.168.1.100 ... (more) I can't modify the local network further than the first router (10.0.0.1). That is the only different I've found so far. Any idea about how to solve it? Thank you.

    Read the article

  • Logging into Local Statusnet instance on Apache causes browser to download a file

    - by DilbertDave
    I've installed statusnet 0.9.1 on a Windows Server via the WAMP stack and on the whole it seems to be fine. However, when logging in using IE7 or Chrome the browers invoke a file download, i.e. the File Download dialog is displayed. In IE7 the file is called notice with the content below (some parts starred out): <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/"> <ShortName>Mumble Notice Search</ShortName> <Contact>david.carson@*****.com</Contact> <Url type="text/html" method="get" template="http://voice.*****.com/mumble/search/notice?q={searchTerms}"></Url> <Image height="16" width="16" type="image/vnd.microsoft.icon">http://voice.*****.com/mumble/favicon.ico</Image> <Image height="50" width="50" type="image/png">http://voice.******.com/mumble/theme/cloudy/logo.png</Image> <AdultContent>false</AdultContent> <Language>en_GB</Language> <OutputEncoding>UTF-8</OutputEncoding> <InputEncoding>UTF-8</InputEncoding> </OpenSearchDescription> In Chrome (Linux and Windows!) the file is called people and contains similar XML. This is not an issue when logging in using FireFox. This is obviously a configuration issue but I'm not having much luck tracking it down. I tested the previous version of Statusnet on an Ubuntu Server VM on our network and it worked fine for months. Thanks In Advance

    Read the article

  • IP-dependent local port-forwarding on Linux

    - by chronos
    I have configured my server's sshd to listen on a non-standard port 42. However, at work I am behind a firewall/proxy, which only allow outgoing connections to ports 21, 22, 80 and 443. Consequently, I cannot ssh to my server from work, which is bad. I do not want to return sshd to port 22. The idea is this: on my server, locally forward port 22 to port 42 if source IP is matching the external IP of my work's network. For clarity, let us assume that my server's IP is 169.1.1.1 (on eth1), and my work external IP is 169.250.250.250. For all IPs different from 169.250.250.250, my server should respond with an expected 'connection refused', as it does for a non-listening port. I'm very new to iptables. I have briefly looked through the long iptables manual and these related / relevant questions: http://serverfault.com/questions/57872/iptables-question-forwarding-port-x-to-an-ssh-port-of-different-machine-on-the-n http://serverfault.com/questions/140622/how-can-i-port-forward-with-iptables However, those questions deal with more complicated several-host scenarios, and it is not clear to me which tables and chains I should use for local port-forwarding, and if I should have 2 rules (for "question" and "answer" packets), or only 1 rule for "question" packets. So far I have only enabled forwarding via sysctl. I will start testing solutions tomorrow, and will appreciate pointers or maybe case-specific examples for implementing my simple scenario. Is the draft solution below correct? iptables -A INPUT [-m state] [-i eth1] --source 169.250.250.250 -p tcp --destination 169.1.1.1:42 --dport 22 --state NEW,ESTABLISHED,RELATED -j ACCEPT Should I use the mangle table instead of filter? And/or FORWARD chain instead of INPUT?

    Read the article

  • Sending mail through local MTA while domain MX records point to Google Apps

    - by Assaf
    My domain's email is managed by Google Apps, so that domain users get Gmail and Calendar, etc. But I also want to be able to send applicative notifications to users outside the domain via email (e.g. "some commented on your post", and so on). However, if I try to send email through code I get blocked by Gmail after a few emails. I send marketing email through MailChimp, to minimize the risk of appearing as spam to my users (one-click unsubscribe, etc.). But I can't send applicative message in this way. I want to install a local MTA (my server runs Ubuntu), but I'm not sure what anti-spam measures I need to implement so that receiving MTAs don't think it's a spam server. What's stopping anyone from setting up a mail server and sending emails using my domain name? AFAIK it's the DNS records that show the MTA's address actually belongs to the domain. But my understanding of this is rather superficial, so someone please correct me if I'm wrong. But what sort of DNS configuration do I need to put in place so that I don't get blacklisted (assuming I don't actually spam anyone)? The MX records already point to Google, and I'd like to keep it this way. So do I just need to define an A record for my internal mail server? Should it show email as coming from a sub-domain, so as not to conflict with the bare domain being managed by google? Edit: Does the following SPF record make sense if I want email from my domain name to be sent by either google's servers or any server with a dns name ending with mydomain.com? "v=spf1 ptr mx:google.com mx:googlemail.com ~all" How should I set up reverse DNS for my server? If I have an A record that points mailsender.mydomain.com to my MTA's ip address, does it mean that reverse lookup will only allow emails sent from [email protected]?

    Read the article

  • Truncated content with Apache on Vagrant VM

    - by Nev Stokes
    I'm using Vagrant to run a CentOS VM in order to try and achieve local development parity with our live servers. I've symlinked /var/www/html with the /vagrant shared directory and am forwarding port 80 for viewing at http://localhost:4567. I'm developing using SublimeText 2 on OS X Mountain Lion. Once I figured that iptables was tripping me up, all was well and good. Until I noticed something strange. I have a sample HTML page consisting of several paragraphs of lorem copy. I can view this fine in a browser on OS X. But when I make an edit, for example removing a paragraph, and refresh the content is truncated with the paragraph I deleted still visible. When I cat the files on the server I can see the changes I made but these aren't even reflected when I curl localhost. I strongly suspect that it's a problem with my Apache settings — with which I didn't really tinker — as the issue doesn't arise when I stop Apache and run sudo python -m SimpleHTTPServer 80 in the directory to view pages instead. What gives?

    Read the article

  • IIS SMTP server (Installed on local server) in parallel to Google Apps

    - by shaharru
    I am currently using free version of Google Apps for hosting my email.It works great for my official mails my email on Google is [email protected]. In addition I'm sending out high volume mails (registrations, forgotten passwords, newsletters etc) from the website (www.mydomain.com) using IIS SMTP installed on my windows machine. These emails are sent from [email protected] My problem is that when I send email from the website using IIS SMTP to a mail address [email protected] I don’t receive the email to Google apps. (I only receive these emails if I install a pop service on the server with the [email protected] email box). It seems that the IIS SMTP is ignoring the domain MX records and just delivers these emails to my local server. Here are my DNS records for domain.com: mydomain.com A 82.80.200.20 3600s mydomain.com TXT v=spf1 ip4: 82.80.200.20 a mx ptr include:aspmx.googlemail.com ~all mydomain.com MX preference: 10 exchange: aspmx2.googlemail.com 3600s mydomain.com MX preference: 10 exchange: aspmx3.googlemail.com 3600s mydomain.com MX preference: 10 exchange: aspmx4.googlemail.com 3600s mydomain.com MX preference: 10 exchange: aspmx5.googlemail.com 3600s mydomain.com MX preference: 1 exchange: aspmx.l.google.com 3600s mydomain.com MX preference: 5 exchange: alt1.aspmx.l.google.com 3600s mydomain.com MX preference: 5 exchange: alt2.aspmx.l.google.com 3600s Please help! Thanks.

    Read the article

  • Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

    - by WerkkreW
    Hello - I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified with SpeakEasy and Speedtest.net) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

    Read the article

  • Undeliverable e-mail message from [email protected]

    - by QGfisher
    I am responsible for IT for a small charity and we have a problem with a few individuals who e-mail us on our hosted e-mail addresses. The individual is on btconnect and our server is also on BT broadband and using MSExchange. I understand that the message from postmaster@he.local are generated by Exchange but can't tell whether this is a problem with our server (seems unlikely as most people send and receive e-mails perfectly well) or with the sender's server. I have copied a sample test message below and would be very grateful if somebody can explain what is causing this problem. I have * the personal details - hope that's acceptable but I don't want to compromise the individual's identity/security. ----- Original Message ----- From: "System Administrator" To: "****" <****.***@btconnect.com Sent: Tuesday, April 06, 2010 3:26 PM Subject: Undeliverable: Test Message Your message To: ***** Subject: Test Message Sent: Tue, 6 Apr 2010 15:25:59 +0100 did not reach the following recipient(s): ***@quiltersguild.org.uk on Tue, 6 Apr 2010 15:26:07 +0100 The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.

    Read the article

  • Cannot Access Local Network Shares (Strange Schannel and lsass.exe issues)

    - by Fake
    When I browse to my own computer's shares by going to \\MYCOMPUTERNAME\ ; I cannot access any of the shares on my LOCAL machine (nor can I access them remotely) and it generates about 40 of the following errors in my system event log: The following fatal alert was generated: 10. The internal error state is 1203. Details: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" /> <EventID>36888</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2011-04-05T13:52:09.144278900Z" /> <EventRecordID>79628</EventRecordID> <Correlation /> <Execution ProcessID="552" ThreadID="672" /> <Channel>System</Channel> <Computer>DEVELOP4.CONTOSO.COM</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="AlertDesc">10</Data> <Data Name="ErrorState">1203</Data> </EventData> </Event> Additonal information: The process that is generating the error is lsass.exe OS: Windows7 Professional x64 Joined to Domain: Yes I was able to access the shares locally in the past I am having the same issue on 3 other computers that have similar configurations Any help would be greatly appreciated, because I have no idea what's wrong. Thanks!

    Read the article

  • Malicious content on server - next steps advice [closed]

    - by Under435
    Possible Duplicate: My server's been hacked EMERGENCY I just got an e-mail from my hosting company that they got a report of malicious content being hosted on my vps. I was unaware of this and started looking into it. I discovered a file called /var/www/mysite.com/osc.htm. Soon after I discovered some weird php files wp-includes.php and ndlist.php both recognized as being PHP/WebShell.A.1 virus. I removed all these files but I'm unsure of what to do next. Can anyone help me analyze the output below of sudo netstat -A inet -p -e and give advice on what's best to do next. Thanks very much in advance Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 localhost.localdo:mysql localhost.localdo:37495 TIME_WAIT root 0 - tcp 0 1 mysite.com:50524 xnacreators.net:smtp SYN_SENT Debian-exim 69746 25848/exim4 tcp 0 0 mysite.com:www tha165.thehealtha:37065 TIME_WAIT root 0 - tcp 0 0 localhost.localdo:37494 localhost.localdo:mysql TIME_WAIT root 0 - udp 0 0 mysite.com:59447 merlin.ensma.fr:ntp ESTABLISHED ntpd 3769 2522/ntpd udp 0 0 mysite.com:36432 beast.syus.org:ntp ESTABLISHED ntpd 4357 2523/ntpd udp 0 0 mysite.com:48212 formularfetischiste:ntp ESTABLISHED ntpd 3768 2522/ntpd udp 0 0 mysite.com:46690 formularfetischiste:ntp ESTABLISHED ntpd 4354 2523/ntpd udp 0 0 mysite.com:35009 stratum-2-core-a.qu:ntp ESTABLISHED ntpd 4356 2523/ntpd udp 0 0 mysite.com:58702 stratum-2-core-a.qu:ntp ESTABLISHED ntpd 3770 2522/ntpd udp 0 0 mysite.com:49583 merlin.ensma.fr:ntp ESTABLISHED ntpd 4355 2523/ntpd udp 0 0 mysite.com:56290 beast.syus.org:ntp ESTABLISHED ntpd 3771 2522/ntpd

    Read the article

  • Authority Information Access local path being ignored

    - by Kevin
    I have a CA set up in Server 2008 R2, and generally it is working, but I can't control the local path/filename it writes its own certificate to for the Authority Information Access publishing. Here's a screen shot of the dialog I'm trying to set this on: From these settings I would expect to get the file: C:\Windows\system32\CertSrv\CertEnroll\DAMNIT.crt But instead I get: C:\Windows\system32\CertSrv\CertEnroll\SERVER.domain.com_My Issuing Authority(1).crt Of course, the actual change shown wouldn't be very useful, but it's illustrative; no matter what path/filename I use, it always lands up in the same place and with the same name. I actually wanted to change the name from <ServerDNSName>_<CaName><CertificateName>.crt to <CaName><CertificateName>.crt, since the latter corresponds to the HTTP URL whereas the former does not. Admittedly, I haven't set up many CAs so perhaps I'm just deluded as to what this dialog is supposed to be setting, but if so this is notoriously bad UI design. (Incidentally, I have a couple other complaints with the same dialog.) What's going on here and is there some way to get the filename pattern I want?

    Read the article

  • Synchronising a remote folder with a local one.

    - by Workshop Alex
    I am using a network disk (that's connected to my router by USB) to store several data files. A simple .NET application that I've created is supposed to read and modify these data files. However, some security issues are preventing this application to access these files directly. (Actually, these have been built-in to my application on purpose since it's not going to support NAS disks.) Since this disk is shared with several computers, I just want to have a simple synchronisation method, which will copy the files to a local folder where3 my application can access them. And, once modified, it should send back the modified files to the NAS disk again. I have two options: 1) Build a second application to do my own synchronisation. 2) Find some build-in function inside Windows 7 Ultimate which can do this for me. Option 2 is preferred. Option 1 is something I can do easily, if need be. I don't need third-party tools. (Still, feel free to add some references to good tools, although I won't accept them as answers.) Basically, is this possible with Windows 7 and if so, how?

    Read the article

  • How to take screenshots of WPF applications in correct size and content

    - by Thomas W.
    I usually take screenshots of single windows via the built-in key combination Alt+Print. Unfortunately this does not work well for more and more applications - all of them are WPF applications. Usually the screen shots have at least one of the following properties: the screenshot is larger than expected and contains parts of the screen around the actual window the screenshot has the correct size but includes parts of other windows, e.g. the Windows task bar. Of course the task bar might be in front of the window, but taking screen shots of "normal" programs works fine. How do I take screenshots of WPF application which are correct in size and content? I'd like to avoid the extra effort of checking all the screenshots for correctness, reproducing the situation, taking them again in case of issues or repairing/faking them manually in any pixel manipulation program (e.g. Paint.NET). I observe this on Windows 7 x64 SP 1, all official updates installed, but it might apply to other Windows versions as well (not tested yet). .NET 4.5 is installed. The application itself might only need the built-in .NET 3.5.1. It's reproducible on a virtual machine with the same settings. Examples: Screenshot of an application running in maximized mode. The screen shot includes parts of the task bar. Screenshot of a progress dialog which is behind the task bar. The screenshot also includes the task bar, while it doesn't for non WPF applications.

    Read the article

  • VPN - local and remote networks IP collision

    - by Guido García
    I have created a VPN connection in Windows using the New Network Connection wizard that comes with Windows. It works without problems in most places, but there is one concrete place where, despite the connection to the remote public IP works fine, it is not able to validate the login/password and establish the VPN connection. In this place, the network is 10.0.0.x (the same I use in other places where I am able to connect). The remote network is 192.168.x.x, so I suspect there is some kind of IP collision, because before connecting, a traceroute to i.e. 192.168.0.40 does not fail. 1 4 ms 1 ms 1 ms LINKSYS [10.0.0.1] 2 5 ms 1 ms 1 ms 172.26.27.1 3 4 ms 5 ms 3 ms 192.168.1.100 ... (more) I can't modify the local network further than the first router (10.0.0.1). That is the only different I've found so far. Any idea about how to solve it? Thank you.

    Read the article

  • Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

    - by WerkkreW
    I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

    Read the article

  • Internet Explorer / Windows 7 does not want to show HTML file from local network drive

    - by Jaanus
    Setup: I have Windows 7 running inside VirtualBox on Mac OS X host. I have a shared drive with some HTML files, that I am mounting as a local drive W: in Windows, from the VirtualBox server \VBOXSVR. I want to look at them with a browser in Windows. Chrome in Windows 7 opens and shows those HTML files just fine (file:///W:/welcome.html). But Internet Explorer does not, and shows this error instead of the files: Internet Explorer cannot display the web page What you can try: [button Diagnose Connection Problems] More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For the internet zone in the status bar, it shows: Internet | Protected Mode: On IE settings are a mystery to me, and I could possibly get it to work by tweaking IE settings, but I don't know which ones. How do I make IE show the same files that Chrome is happy to show? (Chrome showing them means that the files themselves are fine, there is something about the setup that just makes IE be a diva.)

    Read the article

  • IP routing Solaris 9 access the internet from local network

    - by help_me
    I am trying to configure the NICS on the Solaris Sparc server. My problem lies in getting out to the "Internet" from the local network. I have requested the NIC to receive a DHCP server address #ifconfig -interface dhcp start. If anyone could guide me as to what I need to do next. I am not able to ping 4.2.2.2 or access the internet. Much appreciated, thank you #uname -a SunOS dev 5.9 Generic_122300-59 sun4u sparc SUNW,Sun-Fire-V210 ifconfig -a lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.100.0.3 netmask ffffc000 broadcast 10.100.63.255 bge0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.100.0.22 netmask ffffc000 broadcast 10.100.63.255 bge3: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 12 inet 169.14.60.37 netmask fffffe00 broadcast 169.14.61.255 cat /etc/defaultrouter 10.100.0.254 169.14.60.1 cat /etc/resolv.conf nameserver 169.14.96.73 nameserver 169.10.8.4 netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 169.14.60.37 169.14.60.1 UGH 1 0 169.14.60.0 169.14.60.37 U 1 18 bge3 10.100.0.0 10.100.0.3 U 1 34940 bge0 10.100.0.0 10.100.0.22 U 1 0 bge0:2 224.0.0.0 10.100.0.3 U 1 0 bge0 default 10.100.0.254 UG 1 111 default 169.14.60.1 UG 1 26 127.0.0.1 127.0.0.1 UH 10 59464 lo0 bash-2.05$ sudo ndd -get /dev/ip bge0:ip_forwarding 1 bash-2.05$ sudo ndd -get /dev/ip bge3:ip_forwarding 1 bash-2.05$ sudo ndd -get /dev/ip ip_forwarding 1

    Read the article

  • DNS resolve .com domain on local domain

    - by Joost Verdaasdonk
    I'm building a local 2008 R2 domain as a test case to be able to write a roadmap for the real new domain that needs to be created soon. What I would like to know if I'm able to make a record in DNS that will point the domain name: www.example.com and example.com to one of the servers in my network. I tried creating an a-record for it but that doesn't work. To be honest I'm not even sure if this is possible? So can I do this? That way I would be able to fully test all our services (and webb app) offline before I build the real domain and switch the DNS records at the provider. Some advice if possible and where to start is appreciated. The solution (Thanks Brent): Create new Forward lookup zone pointing to example.com Create empty A record pointing to IP of the webserver you are targeting If www is needed create A record with Name: www and IP of your webserver sub domains repeat the process but then with names for example: sub or www.sub (and ip your webserver) Be aware of the DNS Cache while you are in this process. Things can take time or do the following: Right click the server and choose clear cache in CMD: ipconfig /flushdns (to flush the client cache)

    Read the article

  • Apache mod_proxy, how to forward request into local network ip(server)

    - by Beck
    Can't figure out, how to configure mod_proxy for this. I have two domains, one is working fine at the moment. Second is bind to the same ip. I need to forward requests from second domain to another server in local network. like that: domain1.com => 192.168.1.101 domain2.com => 192.168.1.102 What configuration or directives i should use? Thanks ;) Update <VirtualHost *:80> ServerName www.domain2.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://192.168.1.103:8080/ ProxyPassReverse / http://192.168.1.103:8080/ </VirtualHost> It just doesn't redirect to second server. That's it. And when i restart apache, it says something with overlapping 80 port. [warn] _default_ VirtualHost overlap on port 80, the first has precedence

    Read the article

  • Windows: disable remote access of local drive, even by domain admin

    - by Matt
    We have a network of Windows 7 PCs that are managed as part of a domain. What we want is for the domain admin to be unable to view the PC's local drive (C:) unless he is physically at the PC. In other words, no remote desktop and no ability to use UNC. In other words, the domain admin should not be allowed to put \\user_pc\c$ in Windows Explorer and see all the files on that computer, unless he is physically present at the PC itself. Edit: to clarify some of the questions/comments that have come up. Yes, I am an admin---but a complete Windows novice. And yes, for the sake of this and my similar questions, it is fair to assume that I am working for someone who is paranoid. I understand the arguments about this being a "social problem versus a technical problem", and "you should be able to trust your admins", etc. But this is the situation in which I find myself. I'm basically new to Windows system administration, but am tasked with creating an environment that is secure by the company owner's definition---and this definition is clearly very different from what most people expect. In short, I understand that this is an unusual request. But I'm hoping there is enough expertise in the ServerFault community to point me in the right direction.

    Read the article

  • Is there a local yubnub.org replacement?

    - by Justin Keogh
    I use yubnub very often... every google search I do by just (in firefox) "ctrl-t" - (now in the url bar) "y g searchterms" [Enter] "y" in this case is a search keyword I added by right clicking in the yubnub.org command box it's really fast, and I just do it automatically now... but the problem is now I am stuck with whatever the yubnub command that I am so used to using does. I cant change it... for example, what if I dont want to use google... but I still want to use the "g" command to search? or say I want to use google's https search... ect... I suppose this would be kinda trivial to implement locally... but I would hate to re-invent the code if it's allready done and in use... ideas? Also a local yubnub.org replacement would save me the DNS lookup and traffic to yubnub.org. I dont expect to be able to import all commands from yubnub.org but that would be cool if possible.

    Read the article

  • PHP Page Stopped outputting content After Running "yum install php-devel" Command

    - by stwhite
    This error is bizarre but after running the "yum install php-devel" command (after a long day of trying to install Facedetect and OpenCV for face detection) my site stopped functioning. The site uses mysql and php. When you hit the url, the page executes the mysql and the php, but it appears to randomly stop outputting the content of the page. None of the code was changed and the site was working flawlessly prior to running the mentioned ssh command. I do use output buffering in the site, but after removing the calls "ob_flush", "ob_end_flush" and "ob_start" it didn't appear to help—still having issues with the site. Any ideas what this could be? Here is output from terminal: [myserver ~]# cd Facedetect-4b1dfe1 [myserver Facedetect-4b1dfe1]# phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 [myserver Facedetect-4b1dfe1]# configure bash: configure: command not found [myserver Facedetect-4b1dfe1]# phpize && configure && make && make install Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 bash: configure: command not found bash: Read: command not found [myserver Facedetect-4b1dfe1]# make make: *** No targets specified and no makefile found. Stop. [myserver Facedetect-4b1dfe1]# yum install php5-devel

    Read the article

  • Serving static content with Apache web server and Tomcat

    - by Hunter
    I've configured Apache web server and Tomcat like this: I created a new file in apache2/sites-available, named it "myDomain" with this content: <VirtualHost *:80> ServerAdmin [email protected] ServerName myDomain.com ServerAlias www.myDomain.com ProxyPass / ajp://localhost:8009 <Proxy *> AllowOverride AuthConfig Order allow,deny Allow from all Options -Indexes </Proxy> </VirtualHost> Enabled mod_proxy and myDomain a2enmod proxy_ajp a2ensite myDomain Edited Tomcat's server.xml (inside the Engine tag) <Host name="myDomain.com" appBase="webapps/myApp"> <Context path="" docBase="."/> </Host> <Host name="www.myDomain.com" appBase="webapps/myApp"> <Context path="" docBase="."/> </Host> This works great. But I don't like to put static files (html, images, videos etc.) into {tomcat home}/webapps/myApp's subfolders instead I'd like to put them the apache webserver's root WWW directory's subdirectories. And I'd like Apache web server to serve these files alone. How could I do this? So all incoming request will be forwarded to Tomcat except those that ask for a static file.

    Read the article

  • Localhost stop resolving/serving local site after a few clicks IIS 7.5

    - by Jo-Pierre
    previously I have searched tried to find the answer from a previous question, however Im not sure it was resolved. I could comment on the question to find more, so decided to post a new question. Previous question found (http://serverfault.com/questions/314333/localhost-stop-resolving-after-a-few-minutes-iis-7-5) So I set up a new website on Windows 7 IIS 7.5 ... I give it a host header and in the hosts file I add the entry for 127.0.0.1 and browse the site. After about the second or third time of trying to click around on the local site, it starts hanging ... just seems to be looking like its trying to load, but just eventually comes back in Firefox with "The connection was reset" (takes about 30-50 secs before this happens). I then used a program like CurrPorts, to view the ports that are listening, and for the initial request it all seems good. Now after the site is hanging, I dont see the hit coming through anymore. Its as if the browser loses touch with IIS or something. If I open a different browser, works fine for about 2 clicks or so, then same problem. Anyone know what could be causing this? Or how to resolve?

    Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >