Search Results

Search found 23762 results on 951 pages for 'network speed'.

Page 86/951 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Second network card configuration not working.

  - by Sebas

  I have 4 servers running Centos 5. All of them have two ethernet network cards. I have configured 192.168.1.x IP addresses on their eth0 card. They are all connected to the same switch using their eth0 card and they are all working. I have configured 10.72.11.x IP addresses on their eth1 card.They are all connected to the same switch - a different one from the switch used with eth0 card - using their eth1 card and they are NOT all working. Their configuration files is like: DEVICE=eth1 BOOTPROTO=static IPADDR=10.72.11.236 BROADCAST=10.72.11.191 NETMASK=255.255.255.192 NETWORK=10.72.11.128 HWADDR=84:2B:2B:55:4B:98 IPV6INIT=yes IPV6_AUTOCONF=yes ONBOOT=yes The interfase is starting and configured as I need. [root@sql1 network-scripts]# ifconfig eth0 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:97 inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::862b:2bff:fe55:4b97/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2981 errors:0 dropped:0 overruns:0 frame:0 TX packets:319 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:386809 (377.7 KiB) TX bytes:66134 (64.5 KiB) Interrupt:36 Memory:da000000-da012800 eth1 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:98 inet addr:10.72.11.236 Bcast:10.72.11.191 Mask:255.255.255.192 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:48 Memory:dc000000-dc012800 I also added a route-eth1 file that looks like: 10.0.0.0/8 via 10.72.11.254 Routing looks fine to me: [root@sql1 network-scripts]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.72.11.192 0.0.0.0 255.255.255.192 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.72.11.254 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 But I cannot ping one server from the other. [root@sql1 network-scripts]# ping 10.72.11.235 PING 10.72.11.235 (10.72.11.235) 56(84) bytes of data. From 10.72.11.236 icmp_seq=1 Destination Host Unreachable From 10.72.11.236 icmp_seq=2 Destination Host Unreachable From 10.72.11.236 icmp_seq=3 Destination Host Unreachable From 10.72.11.236 icmp_seq=4 Destination Host Unreachable From 10.72.11.236 icmp_seq=5 Destination Host Unreachable From 10.72.11.236 icmp_seq=6 Destination Host Unreachable ^C --- 10.72.11.235 ping statistics --- 7 packets transmitted, 0 received, +6 errors, 100% packet loss, time 6033ms , pipe 3 What am I doing wrong?

  Read the article

• Which is faster: Appropriate data input or appropriate data structure?

  - by Anon

  I have a dataset whose columns look like this: Consumer ID | Product ID | Time Period | Product Score 1 | 1 | 1 | 2 2 | 1 | 2 | 3 and so on. As part of a program (written in C) I need to process the product scores given by all consumers for a particular product and time period combination for all possible combinations. Suppose that there are 3 products and 2 time periods. Then I need to process the product scores for all possible combinations as shown below: Product ID | Time Period 1 | 1 1 | 2 2 | 1 2 | 2 3 | 1 3 | 2 I will need to process the data along the above lines lots of times ( 10k) and the dataset is fairly large (e.g., 48k consumers, 100 products, 24 time periods etc). So speed is an issue. I came up with two ways to process the data and am wondering which is the faster approach or perhaps it does not matter much? (speed matters but not at the cost of undue maintenance/readability): Sort the data on product id and time period and then loop through the data to extract data for all possible combinations. Store the consumer ids of all consumers who provided product scores for a particular combination of product id and time period and process the data accordingly. Any thoughts? Any other way to speed up the processing? Thanks

  Read the article

• Automation : Selenium iphone(Mobile) Driver To Capture Network using Xcode iPhone Simulator

  - by Sandeep

  I am using Xcode iPhone(Mobile) simulator to run Selenium iPhone WebDriver Automation scripts for mobile Websites. Is there anyway to capture Network-Traffic on iPhone simulator similar to Selenium RC Network capture or BrowserMob Proxy for Web Driver. Please let me know if you know way to capture Network traffic on iPhone simulator programmatically. I do see some tools like Wireshark or HTTPScoop to capture network traffic but I need in a pro grammatical way to automate. I need this scenario for pixel tracking. Thanks Sandeep

  Read the article

• Node.js vs PHP processing speed

  - by Cody Craven

  I've been looking into node.js recently and wanted to see a true comparison of processing speed for PHP vs Node.js. In most of the comparisons I had seen, Node trounced Apache/PHP set ups handily. However all of the tests were small 'hello worlds' that would not accurately reflect any webpage's markup. So I decided to create a basic HTML page with 10,000 hello world paragraph elements. In these tests Node with Cluster was beaten to a pulp by PHP on Nginx utilizing PHP-FPM. So I'm curious if I am misusing Node somehow or if Node is really just this bad at processing power. Note that my results were equivalent outputting "Hello world\n" with text/plain as the HTML, but I only included the HTML as it's closer to the use case I was investigating. My testing box: Core i7-2600 Intel CPU (has 8 threads with 4 cores) 8GB DDR3 RAM Fedora 16 64bit Node.js v0.6.13 Nginx v1.0.13 PHP v5.3.10 (with PHP-FPM) My test scripts: Node.js script var cluster = require('cluster'); var http = require('http'); var numCPUs = require('os').cpus().length; if (cluster.isMaster) { // Fork workers. for (var i = 0; i < numCPUs; i++) { cluster.fork(); } cluster.on('death', function (worker) { console.log('worker ' + worker.pid + ' died'); }); } else { // Worker processes have an HTTP server. http.Server(function (req, res) { res.writeHead(200, {'Content-Type': 'text/html'}); res.write('<html>\n<head>\n<title>Speed test</title>\n</head>\n<body>\n'); for (var i = 0; i < 10000; i++) { res.write('<p>Hello world</p>\n'); } res.end('</body>\n</html>'); }).listen(80); } This script is adapted from Node.js' documentation at http://nodejs.org/docs/latest/api/cluster.html PHP script <?php echo "<html>\n<head>\n<title>Speed test</title>\n</head>\n<body>\n"; for ($i = 0; $i < 10000; $i++) { echo "<p>Hello world</p>\n"; } echo "</body>\n</html>"; My results Node.js $ ab -n 500 -c 20 http://speedtest.dev/ This is ApacheBench, Version 2.3 <$Revision: 655654 $> Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/ Licensed to The Apache Software Foundation, http://www.apache.org/ Benchmarking speedtest.dev (be patient) Completed 100 requests Completed 200 requests Completed 300 requests Completed 400 requests Completed 500 requests Finished 500 requests Server Software: Server Hostname: speedtest.dev Server Port: 80 Document Path: / Document Length: 190070 bytes Concurrency Level: 20 Time taken for tests: 14.603 seconds Complete requests: 500 Failed requests: 0 Write errors: 0 Total transferred: 95066500 bytes HTML transferred: 95035000 bytes Requests per second: 34.24 [#/sec] (mean) Time per request: 584.123 [ms] (mean) Time per request: 29.206 [ms] (mean, across all concurrent requests) Transfer rate: 6357.45 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 0 0.2 0 2 Processing: 94 547 405.4 424 2516 Waiting: 0 331 399.3 216 2284 Total: 95 547 405.4 424 2516 Percentage of the requests served within a certain time (ms) 50% 424 66% 607 75% 733 80% 813 90% 1084 95% 1325 98% 1843 99% 2062 100% 2516 (longest request) PHP/Nginx $ ab -n 500 -c 20 http://speedtest.dev/test.php This is ApacheBench, Version 2.3 <$Revision: 655654 $> Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/ Licensed to The Apache Software Foundation, http://www.apache.org/ Benchmarking speedtest.dev (be patient) Completed 100 requests Completed 200 requests Completed 300 requests Completed 400 requests Completed 500 requests Finished 500 requests Server Software: nginx/1.0.13 Server Hostname: speedtest.dev Server Port: 80 Document Path: /test.php Document Length: 190070 bytes Concurrency Level: 20 Time taken for tests: 0.130 seconds Complete requests: 500 Failed requests: 0 Write errors: 0 Total transferred: 95109000 bytes HTML transferred: 95035000 bytes Requests per second: 3849.11 [#/sec] (mean) Time per request: 5.196 [ms] (mean) Time per request: 0.260 [ms] (mean, across all concurrent requests) Transfer rate: 715010.65 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 0 0.2 0 1 Processing: 3 5 0.7 5 7 Waiting: 1 4 0.7 4 7 Total: 3 5 0.7 5 7 Percentage of the requests served within a certain time (ms) 50% 5 66% 5 75% 5 80% 6 90% 6 95% 6 98% 6 99% 6 100% 7 (longest request) Additional details Again what I'm looking for is to find out if I'm doing something wrong with Node.js or if it is really just that slow compared to PHP on Nginx with FPM. I certainly think Node has a real niche that it could fit well, however with these test results (which I really hope I made a mistake with - as I like the idea of Node) lead me to believe that it is a horrible choice for even a modest processing load when compared to PHP (let alone JVM or various other fast solutions). As a final note, I also tried running an Apache Bench test against node with $ ab -n 20 -c 20 http://speedtest.dev/ and consistently received a total test time of greater than 0.900 seconds.

  Read the article

• Simulate Network Presence in dbus

  - by Evans

  Is there a way using Python to simulate the presence of an active network connection using dbus? If I call getstate() on the dbus, I'm able to get the current network state. I want to set the current state to 4 (Connection Present). This is because Network Manager is not able to connect using my modem and I use other tools to connect. Pidgin, Empathy and other software are not able to detect the network.

  Read the article

• Smallest sum of graph weight, where each node are connceted (like a network)

  - by Svisstack

  Hello, What algorithm I can use for problem like this: Have a graph positive weighted, i want to know a smallest possible sum of weights where each node are connected (connected like a network, where each node is a eg. network device). In this network each node can be connected with other node by some other other nodes in way. But all nodes from input graph must be in a network. Any one can help me with this?

  Read the article

• Mapping Drive Error - System Error 1808

  - by Julian Easterling

  A vendor is attempting to map and preserve a network drive using nt authority/system; so it stays persistent when the interactive session of the server is lost. They were able to do this on one server (Windows 2008 R2) but not a second computer (also Windows 2008 R2). D:\PsExec.exe -s cmd.exe PsExec v1.98 - Execute processes remotely Copyright (C) 2001-2010 Mark Russinovich Sysinternals - www.sysinternals.com Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. all rights reserved. C:\Windows\system32>whoami nt authority\system C:\Windows\system32>net use New connections will be remembered. Status Local Remote Network -------------------------------------------------------------------- OK X: \\netapp1\share1 Microsoft Windows Network The command completed successfully. C:\Windows\system32>net use q: \\netapp1\share1 System error 1808 has occurred. The account used is a computer account. Use your global user account or local user account to access this server. C:\Windows\system32> I am unsure on how to set up a "machine account mapping" which will preserve the drive letter of the Netapp path being mapped, so that the service account running a Windows service can continue to access the share after interactive logon has expired on the server. Since they were able to do this on one server but not another, I'm not sure how to troubleshoot the problem? Any suggestions?

  Read the article

• How to speed up boot sequence on a Dell PowerEdge 1950

  - by Studer

  Everytime I had to reboot one of the Dell PowerEdge 1950 we have, there are very long tests and with them the boot sequence becomes incredibly long. Is there a way to turn off all these tests (or at least speeding them up) ?

  Read the article

• Existing open source software for wireless mesh networking?

  - by user70352

  Hello! My goal: Build a wireless mesh network with some ALIX 2D2 (500 MHz AMD Geode LX800 x86 CPU, 256MB RAM, Atheros wireless card) Aside from working like a normal wireless mesh network users should be able to read/write data from/to the ALIX Boxes and the ALIX boxes should be able to process data. Questions: Should I try to flash dd-wrt x86, voyage linux (linux.voyage.hk) or something else? What (open source) software should I look into before I start? Should I use a 'server' for data storage and processing instead of the ALIX boxes? Is it even possible to use the ALIX boxes for routing AND data storage and processing? Final notes: Data can be anything, for example, I want to setup a wireless mesh using the OLSRD protocol so my whole town gets wifi and can access songs on the network. It's not for that, but that's the idea. I'm not afraid of programing, compiling or working with *nix. This is mostly 'for fun' rather than for practicality. Thanks in advance for any feedback.

  Read the article

• "No more threads can be created in the system" in Network and Sharing Center

  - by Zell Faze

  A while back I noticed on one of our laboratory computers (Windows 7, very little extra software installed) that the network connection icon in the system tray would claim that it had no network connection, even though it did. This issue would go away after the computer was rebooted, but would surface again the next time I looked at the computer (a few days later). Upon opening the Network and Sharing Center I am shown an actual error message, but not one that seems to give me a lot of information about what the problem is. In the place of the usual information about network adapters and whether you are connected to the Internet it simply says: "No more threads can be created in the system." The Event Viewer shows hundreds of events from different services also with the same message. "Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance. hr = 0x800700a4, No more threads can be created in the system."; "The WinHTTP Web Proxy Auto-Discovery Service service failed to start due to the following error: A thread could not be created for the service."; "The IP Helper service terminated with the following error: No more threads can be created in the system." As far as I can tell, this message seems to mean that there is some sort of resource leak in Windows where something is creating a large number of threads and those threads are not being killed off? I've tried restarting WMI and several services related to networking, without avail. Can anyone provide more information on what "No more threads can be created in the system" might mean and what I might be able to do to fix the issue? Currently the only solution appears to be restarting.

  Read the article

• Accessing network shares on Windows7 via SonicWall VPN client

  - by Jack Lloyd

  I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

  Read the article

• Best Practice: Changing CPU speed and dynamic VHD to static VHD in Hyper-V

  - by Journey Tinoco

  I'm collecting best practice to Hyper-V and I have two question. First, Can someone help me with advice about how to limit and improve the CPU usage on the VMs (hyper-v)? Or maybe you have links about this topic. The other question is about how can I change dynamic VHDs to static VHDs??. Please, hope this helps. Thanks.

  Read the article

• Intel Wireless 4965AGN not achieving N throughput when connected to an Airport Express N network

  - by BenA

  I have an Intel Wireless WiFi Link 4965AGN adaptor in my laptop (HP Pavillion dv2000 series) which is connecting to a 5Ghz-only 802.11n network provided by an Apple Airport Express. The network is using WPA2 encryption. My desktop is also connected the Airport, via a Linksys WUSB600N USB adaptor. Both are running with the latest drivers, and the Airport is running the latest firmware. The Airport is also configured to use wide channels. The problem I have is that I never get throughput above 4MB/s when transferring files between the two machines. Even a pessimistic calculation shows a 270Mbps network as being capable of transfer rates at well above 10MB/s. I'm pretty sure I've isolated the issue to being the Intel adaptor, as wiring the desktop to the AP, and using the Linksys adaptor on the laptop immediately yielded speeds limited by the 100MB/s ethernet connection. I know that 802.11n is still a draft standard, and so mixing kit from different manufacturers can easily lead to poor results, but I was just wondering if anybody else out there has had success with this Intel adaptor on an N network? Or even better, connecting it to an Airport Express? Can anybody give me any advice on how to troubleshoot this issue? I should also mention that the Airport Express doesn't allow you to manually specify channels when running in N mode, and that I've been able to rule out interference from other Wireless LANs by scanning. There aren't any other 5GHz networks in my area. All ideas welcome! Update: A while later, I've just updated to the most recent drivers for both the Intel chip in the laptop, and the USB adaptor. Unfortunately this hasn't improved things :(. If anybody has any advice it would be be gratefully received.

  Read the article

• Windows 8 unable to connect to WPA2 AES Wireless Network

  - by user170193

  I'm running Windows 8 and am unable to connect to my home wireless network. I've tried restarting the router, patching the drivers to the next version, patching the drivers to the last version, running windows update and patching the chipset drivers to the latest version. So far nothing has worked. My computer can get on the internet via USB tethering on my phone or an open WiFi connection, but it is unable to connect to my home WPA2 AES secured wireless network. It sees the network, attempts to connect, gets a limited connection and then drops the connection. All the other wireless devices in my household have no problems. I have the new Dell XPS 12, running Windows 8 using an Intel Centrino Advanced-N 6235 wireless adapter. I've refreshed windows twice now to try different driver configurations. I've tried uninstalling all the Dell software, I've tried uninstalling all the Intel software and reinstalling just the drivers. I've tried turning switching the ability for the Wireless driver to turn the computer off or on. I've tried setting up the connection manually from desktop mode. I've tried switching it on and off using the wireless button on the keyboard and in the software. So far nothing has allowed me to connect to the secured network. It just keeps getting a limited connection, dropping the connection and retrying. It's driving me crazy, any ideas, anything I missed? Thanks.

  Read the article

• Stress test speed on a gateway?

  - by TheLQ

  I'm interested in stress testing my gateway server but am lost on how. Most of the stress testing applications I've seen only see how much load an app like Apache can handle, but not this. Essentially I want to send as many packets I can into this box with one computer on one card and see how many come out the other in another computer just to get an idea of what kind of load this can handle. I'm also interested how Snort will perform. I'm not really sure how to do this though. What tools could you recommend that could do this?

  Read the article

• High quality / high speed dvd reader for Mac Pro

  - by deadprogrammer

  I have a high end Mac pro, but one thing in is that I'm unhappy with is a DVD drive. It's a Hitachi GH41N. Apple calls it a "superdrive", but it's anything but. The damn thing makes an amazing amount of noise, and isn't too fast either. What I want is a state of the art, fast, quiet DVD reader, preferably not even a burner. What should I get?

  Read the article

• Cisco SG 300-28P PoE switch appears to have damaged my domain server's network IF

  - by cdonner

  I just replaced the old HP ProCurve switch with a new Cisco SG 300-28P managed switch. It has PoE on all ports. Everything works, except for my domain server that went offline and the network interface appears to be dead. Windows says the network cable is disconnected, and no lights blink on the switch. Tried different cables and different ports on the switch. The Cisco PoE ports are supposed to be auto-sensing, i.e. not to send power to a device that cannot handle it. Is this technique not 100% reliable? The server is a SHUTTLE XS35V2 with an onboard network chip, so it is probably fried. My questions: is this plausible? who's fault is it - Shuttle or Cisco (i.e. which support line should I try first)? UPDATE: I did go back and tried another switch between the server and the Cisco switch, and indeed, the connection came back to live. When everything is powered down and I start fresh, with the server connected to the Cisco switch, the port light will blink for a while and the connection status is "No Internet connection" at first until it goes off after about 20 seconds and the connection status changes to "Network cable disconnected". On the other switch it works. Clearly not a PoE issue now. I will start looking into the Cisco's onboard diagnostic functions, but so far I have not noticed anything unusual in the log.

  Read the article

• pfsense 2.0.1 Firewall SMB Share not showing up under network

  - by atrueresistance

  I have a freenas NAS with a SMB share running at 192.168.2.2 of a 192.168.2.0/28 network. Gateway is 192.168.2.1. Originally this was running on a switch with my LAN, but now having upgraded to new hardware the Freenas has it's own port on the firewall. Before the switch the freenas would show up under Network on a windows 7 box and an OSX Lion box as freenas{wins} or CIFS shares on freenas{osx} so I know it doesn't have anything do to with the freenas. Here are my pfsense rules. ID Proto Source Port Destination Port Gateway Queue Schedule Description PASS TCP FREENAS net * LAN net 139 (NetBIOS-SSN) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 389 (LDAP) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 445 (MS DS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 137 (NetBIOS-NS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 138 (NetBIOS-DGM) * none cifs lan passthrough BLOCK * FREENAS net * LAN net * * none BLOCK * FREENAS net * OPTZONE net * * none BLOCK * FREENAS net * 192.168.2.1 * * none PASS * FREENAS net * * * * none BLOCK * * * * * * none I can connect if I use \\192.168.2.2 and enter the correct login details. I would just like this to show up on the network. Nothing in the log seems to be blocked when I filter by 192.168.2.2. What port am I missing for SMB to show up under the network and not have to connect by IP? ps. Do I really need the LDAP rule?

  Read the article

• Accessing network shares on Windows7 via SonicWall VPN client

  - by Jack Lloyd

  I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

  Read the article

• Ubuntu 12.04 on VMware Player loses network configuration

  - by d4ryl3

  I've been having this issue for 2 weeks now with my VMware Player-hosted Ubuntu 12.04. I only use it for my LAMP stack. I've had no issues with it before until about 2 weeks ago when it almost always (once per day at least) loses its network configuration. On boot it shows: Waiting for network configuration... Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... Then when I do ifconfig -a it doesn't show an IP Address and couldn't get online. The only resolutions I've found so far was either to reinstall VMware Tools or use the VMware Player installer and choose Repair. This is frustrating to me because even when the issue was resolved after doing either of the steps I mentioned, the IP Address gets changed. Then I'd have to update the Remote Configuration of my IDE (Netbeans) and my database manager. What could possible cause this? Please help. Thank you. Additional details: I'm using a laptop with Windows 7 and connected to the office WiFi, which is unrestricted as far as I know. Thanks again.

  Read the article

• How to speed up a HP M9517C

  - by Jen

  I bought a system with 8GB RAM, 1TB HD, Quad-Core AMD Phenom 9550, Nvidia Geforce 9300GE, 64-bit Windows Vista Machine. Bought it primarily because it was cheap and came with 25.5 inch screen. Problem: It's slow - if you can believe it. My Dell laptop 1525 is faster and more stable! I tried installing and dual-booting Linux Mint and ran into video and audio troubles. I need fast and stable and I'm going for awesome. Anyone have some suggestions on making this thing smoking hot? Vista is fine, but slows over time - suspect virus/spyware/etc.. But I need to use Photoshop, Fireworks, Dreamweaver, Illustrator. I've tried the alternatives and I just don't like them. When you've got deadlines looming you want to work with what you know. Also use Skype (and I had audio problems with it in Linux), gotomeeting, gotowebinar. Don't need MS Office. Tried VMWare, Virtualbox and again - I keep getting audio/video problems. I'd love someone's input on THEIR setup and how they got there. I'm sure I need to upgrade my video card, but what should I go to?

  Read the article

• What can I do to speed up createrepo?

  - by jsd

  We are using a yum repository to distribute our software to our production instances. Unfortunately, createrepo is becoming a bottleneck, and we only have 469 packages in the repository. $ time createrepo /opt/tm-yum-repo Spawning worker 0 with 469 pkgs Workers Finished Gathering worker results Saving Primary metadata Saving file lists metadata Saving other metadata Generating sqlite DBs Sqlite DBs complete real 0m43.188s user 0m37.798s sys 0m1.296s What can I do to make it faster?

  Read the article

• Windows 7 PC cannot see some LAN PCs, but can access them via path

  - by zoot

  In an office LAN, with Windows 7 Professional workstations and a FreeNAS Samba server, 2 workstations have intermittent problems in browsing for the other workstations, as well as the FreeNAS server. However, so far, it appears that typing in the path to any of the workstations which aren't visible via the "browse" function, works. ie. the machine Workstation7 is not visible while browsing via Windows Explorer, but is accessible if I type \\Workstation7 in the path field. Occasionally the workstations exhibiting these symptoms show errors that their connection to the FreeNAS server has failed and only rebooting resolves the issue. All other workstations on the network use identical Windows 7 Professional installations and never have these problems. I've checked all machines and they're not using Home Groups. All are setup on the same WorkGroup as the FreeNAS server and the network type is set to Work Network. Temporarily disabling the firewall on the workstations with the issue made no difference, so I know this has nothing to do with the firewall settings. Any pointers would be appreciated. Thanks.

  Read the article

• Nginx's speed, and how to replicate it [migrated]

  - by Mediocre Gopher

  I'm interested in this from more than an academic standpoint rather than a practical standpoint; I don't plan on creating a production webserver to compete with nginx. What I'm wondering is how exactly nginx is so fast. The top google response for this is this thread, but it merely links to a cryptic slideshow and a general covering of different io strategies. All other results seem to simply describe how fast nginx is, rather then the reason. I tried building a simple erlang server to try to compete with nginx, but to no avail; nginx won out. All my server does is spawn a new process for each request, uses that process to read the file to a socket, then closes the file and kills the thread. It's not complicated, but given erlang's lightweight processes and underlying aio structure I thought it would compete, but nginx still wins out by a consistent 300 ms average under a heavy stress test. What is nginx doing that my simple server isn't? My first thought would be keeping files in main memory instead of tossing them between requests, but the filesystem cache does this already so I didn't think it would make that great of difference. Am I wrong? Or is there something else that I'm missing?

  Read the article

• Mac OS X CD ripping speed

  - by SlimSCSI

  I am using vobcopy (installed via macports) to rip DVDs on a mac. I have been doing this for a while on linux with no problems. On the mac however, it is VERY slow. I am guessing that somehow the DVD drive is being limited to 1x in order to keep noise and power consumption down during playback. Is there a way to over ride this? Update: It is MUCH slower than 1x. It has taken me about an hour to copy 300MB Notes: While I appreciate all suggestions, I am not looking for "Have you tried HandBrake?". I am looking for a solution to copy the contents of a DVD, not transcode them. Also, I am launching vobcopy from an apple script that gets executed on DVD insertion, so a GUI solution is not desirable.

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >