Search Results

Search found 6497 results on 260 pages for 'usb appliance'.

Page 86/260 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• how to install Wimax Dongle over Ubuntu?

  - by Mosh

  i have Asus Wimax Dongle and it has an Independence software from the Asus company requires user name and password and its running will over windows 7 now i've tried ubuntu 10.10 but nothing happens when i plug the dongle into usb. in windows if you plugs it for the first time, an application wizard begins and you can find a virtual cd in my computer but i cant find it in Ubuntu now i would install it over ubuntu, how? toast for all

  Read the article

• How should one handle an external hard drive without an enclosure?

  - by TheLakersHighlights

  How should I go about mounting an external hard drive without an enclosure? I have a IDE/SATA to USB adapter. But where should I put the drive, what side should be facing upwards, etc?

  Read the article

• Is it possible to trick iTunes treating an external HD as an iPod?

  - by Boris Pavlovic

  I keep my music collection on my iPod, but since I got my first iPhone two and a half years ago I have quit using the iPod as a portable music device. It's just an external HD. Benefit of having it as an external HD is that when it's connected to some other computer iTunes can play its music and update iTunes database. It would be nice if I could copy data from the iPod to an external USB HD and give away the iPod to somebody who doesn't have one.

  Read the article

• Symbol LL500 Scanner Interface Not Detected

  - by agentfll

  I have an old Symbol LL500 scanner interface box and a scanner to go with it. The box's original cable used one of the old microsoft mouse connectors, but I got a converter to USB. The problem is that when I connect it to my MacBook, the interface powers up and works, but the computer dosen't recognize it or even say that a device is connected. Is there any way to make it see that the interface is there or am I just screwed?

  Read the article

• USB3 does not work in fresh Ubuntu install

  - by Adéline

  I have a new computer with an Asus P8Z68-V LE + Intel i2500 + 8GB of RAM. I installed Ubuntu without any issue, but the USB3 (from the motherboard - on the back of the computer) doesn't work. I plug a USB stick -- nothing, I plug my USB3 external drive -- nothing, when I plug them into the USB2 and everything works perfectly. Also, I ran all updates and everything is up to date. What am I missing?

  Read the article

• Clean install vs disk image

  - by Thanos

  Once a year I am making a clean install on windows, in order to keep my system fast. After posting a question on making a bootable windows usb with exe programs where I was adviced to make a disk image, a new question rose. What is the difference in making a disk image and performing a clean install on windows? Which is better in terms of speed, general performance, value for time and transfering between different computers?

  Read the article

• Concerning persistence size in the Linux Live Creator

  - by user63085

  Message : Hello everyone! I have ,for the last several months, used the Linux Live USB Creator which it is a very useful app to make portable OS on to flash drives. I mostly use this application to test and try out new OS's as they are released, before I decide to make a hard disk installatio on to the computer. In many cases, the application developers will allow the “persistence” feature in the flash-drive-installed OS, which is just another way of saying that after multiple boot-ups and shutdowns, all the changes made to the OS will be saved in the flash-drive. But I have a question about the limit of the Persistence size in Linux Live USB Creator (currently version 2.6). I install Super OS 10 on to a partition on my external drive which has 30 GB. I wanted to reserve 10 GB for the persistence so that I can install more applications and space will not run out as I update the installed applications or when I do system updates. But why is it that only 3950 MB can be put for persistence? It would be great if, when desired, as much more persistence space could be set aside so that the space will not run out soon. Also, as I have installed the OS on a 30 GB drive, I tried to see how much space is left. But it seems only the remaining of the Persistence space is displayed when I click on the File System folder. For example, after I have just installed it now, there is 3.5 GB of free space. Where can I access the remaining 26 GB or so drive space which is in the same drive? How do I access it Sir?? It would be helpful if any one could explain and help me with this. Most importantly, it would be a big relief if the persistence can be somehow expanded by a work-around so that I can continue using my SuperOS 10.04 (now heavily customized) OS, which unfortunately has just over 576 MB of space left now, after I removed OpenOffice.org and installed the Libre Office earlier today. This is what remains from the maximum allowable 3950 MB of space for persistence at set-up. Thanks in advance!

  Read the article

• Can a windows virus downloaded in linux be transferred to windows?

  - by user219048

  I know that linux is mostly safe from viruses, however: if you do download a windows virus (i.e., through a drive-by download), will it just sit there on your computer, and take up space? Is it unable to infect files because of the different operating system? If you transfer files between computers (by using a usb flash drive or through online file sharing), is there any risk that the virus could be transferred to windows and activate?

  Read the article

• Weird connectivity issue wtih USB Wifi stick.

  - by Carlos Nunez

  Hi, all! I'm not sure if this is the appropriate place to throw this question out there, but I'll give it a shot. I'm setting up two PCs, and I've been having massive troubles getting a USB wireless dongle working. I have two Sony VAIOs (Windows XP, SP2) that I found second-hand, and since they will be in a location too far to connect by Ethernet (no, can't do patch panels here :p), I need to connect them by wireless. Easiest and cheapest way to do that at the moment is by using two USB wireless sticks that I've had for a while, but never used. One of the computers is using a SMC-manufactured card, whereas the other is using a Belkin F5D7050. The box with the SMC card can see and authenticate with my router just fine, and has no problem obtaining a DHCP lease. The box with the Belkin, on the other hand, isn't so lucky. While it can see my router and associate with it, it will not obtain a DHCP-issued address. Worse, when I assign a static IP address to the NIC, it can ping the entire network and access the internet (meaning it can authenticate with the router), but no computer can ping to it UNLESS that computer pinged the computer that's pinging it first. Confused? Well, so am I. Has anyone had this issue before? Is this just a sign of a bad card? (For the moment, I have it connected by Ethernet, as I haven't moved it yet. However, this will be a problem when I set it up in its new home later.) Thanks! -Carlos Nunez

  Read the article

• Graphics and USB devices freezing soon after OS loads

  - by Andrew

  I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

  Read the article

• Windows 7 64-bit installation from alternative media (no DVD/USB Flash drive)

  - by Niels Willems

  Greetings I currently have Windows 7 x86 installed on my computer. I want to install Windows 7 x64 on a different partition on my computer. However there is a little issue, I cannot run the x64 install from Windows 7 x86 which I currently have. I was planning to Install Windows 7 x64 on another partition to then boot up from that partition to install it on the partition I actually want my OS on. Once that is complete I could just format the partition from the Windows 7 x64 that I didn't need anymore. But the installer will not run from the x86 version of Windows 7 even though I do not want to upgrade that Windows directly. The reason I'm doing this in such a weird way is that my optical drive is broken and I'm really not into buying a new one since I would use it like once every year or so. I also don't have a USB Flash Drive which is big enough to hold the installation files. As far as I'm aware I cannot use an external hard drive such as this one, which I do have. Are there any alternatives in which I can install Windows 7 x64 or am I forced into buying a USB Flash Drive or new optical drive? Thank you in advance for your replies. Edit: This picture shows my current partitions on my laptop. I want to get Windows 7 x64 on the C partition but have to install it first on the F partition to then boot up the F partition windows to format C and install x64 on that one. My external drive is J. Edit 2: No alternative computer which has a DVD drive, install files are located on an iso from MA3D. To install my 32 bit version I mounted the ISO in Daemon Tools to replace my Windows Vista but since I cannot run 64 bit into my 32 bit OS this doesn't work.

  Read the article

• How do I change the Creation/Mod Date of all folders on a USB drive using Touch command?

  - by Chad--24216

  I've got a USB drive with mp3 music on it that I play in my car. My car has a USB drive port. Problem is that the car sorts the music by Creation/Modification Date (and not alphabetically). This makes it a pain to find what artist I'm looking for. To solve this problem, I need a way to "update" the Creation/Modification Date for all folders on the USB drive every time I add a new folder of music to the USB drive. Anyone know how I can do this? The Touch command works great, but the format touch <filename> would take forever to do on each folder on the drive. Anyway to select all folders on the drive and then touch <all folders>? On my USB drive I have a folder for each album and the songs within each respective folder, like so: Album-1-folder Album-2-folder I need to apply the Touch command to each of the "album" folders on the drive. I stumbled upon a simple solution to solve this issue:touch /media/USB_Drive/*

  Read the article

• Light Peak, "le successeur de l'USB 3", devrait débarquer dès la fin de l'année avec des taux de tra

  Pour Intel, l'USB 3 a déjà un successeur : Light Peak Qui pourra atteindre les 10 Gbps et qui devrait débarquer dès fin 2010 Il y a à peine une an, Intel dévoilait Light Peak, une technologie de transfert de données par fibre optique qui flirte avec les 10 Gbps... soit le double de l'USB 3. Or l'USB 3 semble tarder à s'imposer. Les propos de Kevin Kahn, senior manager chez Intel lors de l'Intel Developer Forum de Pékin, n'en ont que plus de résonance. "Nous voyons [Light Peak] comme le successeur logique de l'USB 3.0. D'une certaine manière nous aimerions réaliser le tout dernier cable dont vous aurez besoin". Même si une période de cohabitation des deux ...

  Read the article

• Windows XP Setup Fails to Recognize USB Floppy after formatting AHCI disk

  - by Strahn

  I am attempting to install Windows XP Professional x64 onto a HP EliteBook 8540w. I have downloaded both the latest Intel Rapid Storage Technology drivers and the Intel Storage Matrix drivers that are listed on HPs website and copied the drivers over to a floppy disk (two separate floppies, one for each version of the drivers.) Booting to my WinXP Pro x64 install CD, I go through the F6 process, load the driver and am able to see my HDD, delete, create and format partitions on it. When I go to continue the install, after checking the disk, the system asks me to enter the disk labeled "Intel Rapid Storage Technology" and press enter to continue. Nothing happens at this point when I press enter. This happens if I use the latest drivers or the older drivers. We have created a slipstreamed install CD using nLite that has the AHCI drivers integrated, which installs fine. However, we have identified a number of issues with the system that I believe are side-effects of using nLite for the slipstreaming and I am attempting to verify that. I have researched this issue and found a few examples of others having the same problem, but no solution. The USB floppy is a Lacie branded floppy, connecting it to a working XP workstation shows it to be the Y-E Data USB floppy drive that is supposedly 100% compatible with XP per MS KB 916196.

  Read the article

• external USB HD doesn't show up on 'sudo fdisk -l' on one Ubuntu, shows up on another (both 'precise')

  - by Menelaos

  I have a 1.5TB WD external USB HDD and two Ubuntu systems, both 'precise'. When I plug the disk on system A it doesn't show up on the output of sudo fdisk -l nor is it automatically mounted (note that that wasn't always the case - it used to appear in the past). When I plug it on system B (again Ubuntu precise) it shows up when I do a sudo fdisk -l (output appended at the end) and mounts automatically just fine. What does this discrepancy point to and what kind of diagnostics should I run / tools I should use to troubleshoot the problem? I followed the suggestion I received to do a sudo tail -f /var/log/syslog and the output is the following when I plug, unplug and replug the USB cable on System A: Sep 14 23:27:09 thorin mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:27:09 thorin mtp-probe: bus: 2, device: 3 was not an MTP device Sep 14 23:28:01 thorin kernel: [ 338.994295] usb 2-2: USB disconnect, device number 3 Sep 14 23:28:04 thorin kernel: [ 341.808139] usb 2-2: new high-speed USB device number 4 using ehci_hcd Sep 14 23:28:04 thorin mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:28:04 thorin mtp-probe: bus: 2, device: 4 was not an MTP device Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting due to inactivity Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting was requested (I guess the last two message are irrelevant). Output of sudo fdisk -l on System B $ sudo fdisk -l Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00070db4 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2905114623 1452556288 83 Linux /dev/sda2 2905116670 2930276351 12579841 5 Extended /dev/sda5 2905116672 2930276351 12579840 82 Linux swap / Solaris Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9c849c84 Device Boot Start End Blocks Id System /dev/sdb1 * 63 488375999 244187968+ 7 HPFS/NTFS/exFAT Disk /dev/sdg: 1500.3 GB, 1500299395072 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930272256 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003e17f Device Boot Start End Blocks Id System /dev/sdg1 2048 2930272255 1465135104 7 HPFS/NTFS/exFAT

  Read the article

• Dosbox USB print Windows 8.1 64Bit

  - by eCronik

  Worked fine until I've upgraded to Windows 8.1 as well as made the mail programm working (had to get a windows live ID and have to type in a password now, when starting Windows). I did set the USB printer to lpt1 on the local Windows 8 computer and another XP computer via LAN to lpt2 the same way with the same printer on the Windows 8 computer. But now it doesn't work anymore from the Win8 one (where the printer is plugged via USB). Tried already deleting lpt2: on the XP one, as well as lpt1 on the Windows 8, resetted it. Not working... :-( I tried also net use lpt1: \server\printer password "\user:Ute Berger" /persistent:yes of course with the correct server and shared printer name as well as net use \server\printer "\user:Ute Berger" password /persistent:yes . This is the name displayed as a user now. But in C:\users it is named Benutzer1. Tried this one also. Nothing worked. What could be the problem here? What's strange is that when I type "net use lpt1:" on the XP, I get another error (67 - The networkname wasn't found) than trying something I didn't set up like lpt2 (2 - The system can't find the file). Could this be a possible problem as even if deleted something is left blocking on the Windows 8 computer? Please help me - I tried for hours today but all I've got was frustration... Regards Tim

  Read the article

• Input/output error reading USB backup drive on CentOS 6.4

  - by Kev

  I'm suddenly seeing some strange behaviour on our USB backup drive that doesn't make sense to me: (2013-10-21 14:58:23 [root@newdc /]$ cd /mnt/backup/ (2013-10-21 14:59:03 [root@newdc backup]$ ls -la ls: reading directory .: Input/output error total 0 (2013-10-21 14:59:05 [root@newdc backup]$ df -h /mnt/backup Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 843G 28G 97% /mnt/backup How is it possible for the OS to know how much is in use, but I can't ls any of it as root? Or more to the point, what problem does this indicate? /var/log/messages said this: Oct 21 14:57:54 g5 kernel: EXT4-fs error (device sda1): ext4_journal_start_sb: Detected aborted journal Oct 21 14:57:54 g5 kernel: EXT4-fs (sda1): Remounting filesystem read-only But...read-only is something different than 'throw an io error'... After unmounting to try fsck on it, I had someone on-site look at it, and the drive was not spun up, and had a slow-flashing light, which I believe means it was in a power-suspend mode. So I had them unplug and replug the USB cable, and now (before remounting) it says: fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/sda1: clean, 2805106/61046784 files, 181934167/244182016 blocks I then mount it and now ls works and df reports: Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 680G 191G 79% /mnt/backup What would cause it to go into such a state without being asked to? Why all the weird behaviour, and now it appears to not be corrupt?

  Read the article

• Moving from 1 Linux Partition to Many over USB Mount

  - by Mistiry

  We have devices which use Compact Flash for storage. They work OK, but we recently got industrial-grade CF cards to start using. One of the major problems we get is corruption on the flash card. As it is now, these flash cards run Debian with everything in a single partition. We want to have multiple partitions on the new industrial CF cards to help avoid some of the corruption problems. I booted up the device, and attached a USB CF reader. I then used fdisk to partition the CF card in the USB reader. How can I move the data to these partitions so that it works? I have a partition for each of these directories: /lib /var /root /boot /tmp /home /etc / swap space I imagine I can't just use rsync - do I need to attach a second CF reader with a copy of the CF card, so that it's not active and in-use - and then copy from the first reader to the second? How will the system know where to find its files? I know I'd have to change fstab, but that resides in /etc, which will be on a separate partition...how will it find the fstab file if it can't find /etc? And what about grub? I'm at a loss, perhaps its just because I'm under the weather, or I'm just missing a piece of logic here... Any help is greatly appreciated, this is somewhat urgent as our existing stock is nearing its end and we don't want to purchase anything but these industrial cards, but need to get it working with partitions.

  Read the article

• Fixing Windows install by connecting it's hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• Fixing Windows install by connecting its hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• How to use CLEAR USB internet connection in Ubuntu (host) and WindowsXP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for linux as yet. I've installed windowsxp as guest in ubuntu and the version I'm using is 3.2.2. USB is connecting fine in WindowsXP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

• I need to monitor a physical RS232 port on an appliance?

  - by Kendor

  I need to verify what's being output on an RS232 port of an appliance that's running proprietary software (e.g. NOT Windows or Linux). The port is sending data to a target app on another appliance, but I need to verify/log the actual data raw outside of the appliances. Would appreciate a recommendation on process/software to attach to the physical sending port (I have a straight through RS232 cable) and grab sample output of that port.

  Read the article

• How can I reprogram a USB "easy button"?

  - by Shawn Simon

  I have a USB "easy button"- is a USB cable attached to a large button. It appears as a keyboard to the computer. When I push the button, it sends the keys Start+R and then quickly types in a pre-configured URL. I am fairly certain that the company that produces these buttons sets the URL via some sort of software over USB. How could I reprogram the button myself? What sort of software would I need? Here is a link to the website: http://www.usbsmartbuttons.com/

  Read the article

• Android-USB Connectivity

  - by neoHacker

  Hi all, I'm in the middle of an android app that need to check whether the device is connected to another system or pendrive through usb and if it is connected i need to send a copy of my database file through usb port. This sis for backing up my database. I have no idea how to prompt for usb connections. I searched the net. But no results!.Can anyone please help. Because i'm stuck here at my project. Thanks in advance.

  Read the article

• Problem with an application in USB

  - by rajivpradeep

  I have an application on a pen drive, which executes some flash files on the same USB flash drive. when i run the application with in the drive, the application just keeps running in the back ground without running the flash files. When i copy the application on desktop, it runs the flash files in the USB. Also i programmed the app to write log file, when i run the application with in USB, the app is running but the log file is not getting written, when i remove the pen drive, the file gets written. What might be the problem, I am using VC++ , VS 2008 to build the application.

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >