Search Results

Search found 2143 results on 86 pages for 'vpn'.

Page 86/86 | < Previous Page | 82 83 84 85 86 

• Cisco: unable to negotiate IP using IPCP with Windows server

  - by lnk

  I am connecting to Windows server using PPP (for vpn), I establish connection but server does not respond me for my address requests: *Mar 23 00:40:06.055: Vi1 MS-CHAP-V2: I CHALLENGE id 0 len 25 from "MSDC" *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using hostname from interface CHAP *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using password from interface CHAP *Mar 23 00:40:06.067: Vi1 MS-CHAP-V2: O RESPONSE id 0 len 69 from "XXX" *Mar 23 00:40:06.087: Vi1 PPP: I pkt type 0xC223, datagramsize 50 link[ppp] *Mar 23 00:40:06.087: Vi1 MS-CHAP-V2: I SUCCESS id 0 len 46 msg is "S=XXX" *Mar 23 00:40:06.087: Vi1 MS CHAP V2 No Password found for : XXX *Mar 23 00:40:06.091: Vi1 MS CHAP V2 Check AuthenticatorResponse Success for : XXX *Mar 23 00:40:06.091: Vi1 IPCP: O CONFREQ [Closed] id 1 len 20 *Mar 23 00:40:06.091: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:06.091: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:07.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up *Mar 23 00:40:07.091: Vi1 LCP: O ECHOREQ [Open] id 1 len 12 magic 0x194CAFCF *Mar 23 00:40:07.103: Vi1 LCP-FS: I ECHOREP [Open] id 1 len 12 magic 0x361B62E5 *Mar 23 00:40:07.103: Vi1 LCP-FS: Received id 1, sent id 1, line up *Mar 23 00:40:08.083: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:08.083: Vi1 IPCP: O CONFREQ [REQsent] id 2 len 20 *Mar 23 00:40:08.083: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:08.083: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:10.099: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:10.099: Vi1 IPCP: O CONFREQ [REQsent] id 3 len 20 *Mar 23 00:40:10.099: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:10.099: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.115: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:12.115: Vi1 IPCP: O CONFREQ [REQsent] id 4 len 20 *Mar 23 00:40:12.115: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:12.115: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.211: Vi1 LCP: O ECHOREQ [Open] id 2 len 12 magic 0x194CAFCF *Mar 23 00:40:12.219: Vi1 LCP-FS: I ECHOREP [Open] id 2 len 12 magic 0x361B62E5 *Mar 23 00:40:12.219: Vi1 LCP-FS: Received id 2, sent id 2, line up *Mar 23 00:40:14.131: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:14.131: Vi1 IPCP: O CONFREQ [REQsent] id 5 len 20 *Mar 23 00:40:14.131: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:14.131: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:16.147: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:16.147: Vi1 IPCP: O CONFREQ [REQsent] id 6 len 20 *Mar 23 00:40:16.147: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:16.147: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:17.331: Vi1 LCP: O ECHOREQ [Open] id 3 len 12 magic 0x194CAFCF *Mar 23 00:40:17.343: Vi1 LCP-FS: I ECHOREP [Open] id 3 len 12 magic 0x361B62E5 *Mar 23 00:40:17.343: Vi1 LCP-FS: Received id 3, sent id 3, line up You see: My router asks for address, but only keepalives are on line. But the same server works with windows client!! ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service internal ! hostname Router ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ! ! ip cef vpdn enable ! vpdn-group pptp request-dialin protocol pptp pool-member 1 initiate-to ip XXXX ! ! ! ! ! ! ! bridge irb ! ! interface ATM0 no ip address shutdown no atm ilmi-keepalive dsl operating-mode auto ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface Dot11Radio0 no ip address shutdown speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Vlan1 no ip address bridge-group 1 ! interface Dialer0 ip address negotiated encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer string XXX dialer persistent dialer vpdn dialer-group 1 keepalive 5 3 no cdp enable ppp authentication ms-chap-v2 optional ppp eap refuse ppp chap hostname XXX ppp chap password 0 XXX ppp ipcp mask request ppp ipcp ignore-map ppp ipcp address accept ! interface BVI1 mac-address XXX.XXX.XXX ip address dhcp ! ip classless ip route 172.0.0.0 255.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! dialer-list 1 protocol ip permit ! control-plane ! bridge 1 protocol vlan-bridge bridge 1 route ip ! line con 0 no modem enable line aux 0 line vty 0 4 login ! scheduler max-task-time 5000 end

  Read the article

• OpenVPN Configuration - Windows 7 client & debian server

  - by Guillaume

  I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

  Read the article

• Wireshark does not see interfaces (winXP)

  - by bua

  Short story: Wireshark is working....on my winXP-32b ... usage .... Long long time later Wireshark does not work It can't find any usefull interface (just VPN) ipconfig /all Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Dell Wireless 1490 Dual Band WLAN Mini-Card Physical Address. . . . . . . . . : SOME VALID MAC Ethernet adapter eth0: Connection-specific DNS Suffix . : xxxx Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller Physical Address. . . . . . . . . : SOME VALID MAC Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.12.68 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168..... ..... Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Fortinet virtual adapter Physical Address. . . . . . . . . : SOME VALID MAC Following steps didn't help: Several Wireshark re-installation Several LIBPCAP re installation SP3 for winXP Any ideas welcome.

  Read the article

• OpenVPN - client-to-client traffic working in one direction but not the other

  - by Pawz

  I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

  Read the article

• Cisco PIX firewall blocking inbound Exchange email

  - by sumsaricum

  [Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

  Read the article

• Most secure way to access my home Linux server while I am on the road? Specialized solution wanted

  - by Ace Paus

  I think many people may be in my situation. I travel on business with a laptop. And I need secure access to files from the office (which in my case is my home). The short version of my question: How can I make SSH/SFTP really secure when only one person needs to connect to the server from one laptop? In this situation, what special steps would make it almost impossible for anyone else to get online access to the server? A lot more details: I use Ubuntu Linux on both my laptop (KDE) and my home/office server. Connectivity is not a problem. I can tether to my phone's connection if needed. I need access to a large number of files (around 300 GB). I don't need all of them at once, but I don't know in advance which files I might need. These files contain confidential client info and personal info such as credit card numbers, so they must be secure. Given this, I don't want store all these files on Dropbox or Amazon AWS, or similar. I couldn't justify that cost anyway (Dropbox don't even publish prices for plans above 100 GB, and security is a concern). However, I am willing to spend some money on a proper solution. A VPN service, for example, might be part of the solution? Or other commercial services? I've heard about PogoPlug, but I don't know if there is a similar service that might address my security concerns? I could copy all my files to my laptop because it has the space. But then I have to sync between my home computer and my laptop and I found in the past that I'm not very good about doing this. And if my laptop is lost or stolen, my data would be on it. The laptop drive is an SSD and encryption solutions for SSD drives are not good. Therefore, it seems best to keep all my data on my Linux file server (which is safe at home). Is that a reasonable conclusion, or is anything connected to the Internet such a risk that I should just copy the data to the laptop (and maybe replace the SSD with an HDD, which reduces battery life and performance)? I view the risks of losing a laptop to be higher. I am not an obvious hacking target online. My home broadband is cable Internet, and it seems very reliable. So I want to know the best (reasonable) way to securely access my data (from my laptop) while on the road. I only need to access it from this one computer, although I may connect from either my phone's 3G/4G or via WiFi or some client's broadband, etc. So I won't know in advance which IP address I'll have. I am leaning toward a solution based on SSH and SFTP (or similar). SSH/SFTP would provided about all the functionality I anticipate needing. I would like to use SFTP and Dolphin to browse and download files. I'll use SSH and the terminal for anything else. My Linux file server is set up with OpenSSH. I think I have SSH relatively secured. I'm using Denyhosts too. But I want to go several steps further. I want to get the chances that anyone can get into my server as close to zero as possible while still allowing me to get access from the road. I'm not a sysadmin or programmer or real "superuser". I have to spend most of my time doing other things. I've heard about "port knocking" but I have never used it and I don't know how to implement it (although I'm willing to learn). I have already read a number of articles with titles such as: Top 20 OpenSSH Server Best Security Practices 20 Linux Server Hardening Security Tips Debian Linux Stop SSH User Hacking / Cracking Attacks with DenyHosts Software more... I have not implemented every single thing I've read about. I probably can't do that. But maybe there is something even better I can do in my situation because I only need access from a single laptop. I'm just one user. My server does not need to be accessible to the general public. Given all these facts, I'm hoping I can get some suggestions here that are within my capability to implement and that leverage these facts to create a great deal better security than general purpose suggestions in the articles above.

  Read the article

• Upgrading from TFS 2010 RC to TFS 2010 RTM done

  - by Martin Hinshelwood

  Today is the big day, with the Launch of Visual Studio 2010 already done in Asia, and rolling around the world towards us, we are getting ready for the RTM (Released). We have had TFS 2010 in Production for nearly 6 months and have had only minimal problems. Update 12th April 2010  – Added Scott Hanselman’s tweet about the MSDN download release time. SSW was the first company in the world outside of Microsoft to deploy Visual Studio 2010 Team Foundation Server to production, not once, but twice. I am hoping to make it 3 in a row, but with all the hype around the new version, and with it being a production release and not just a go-live, I think there will be a lot of competition. Developers: MSDN will be updated with #vs2010 downloads and details at 10am PST *today*! @shanselman - Scott Hanselman Same as before, we need to Uninstall 2010 RC and install 2010 RTM. The installer will take care of all the complexity of actually upgrading any schema changes. If you are upgrading from TFS 2008 to TFS2010 you can follow our Rules To Better TFS 2010 Migration and read my post on our successes.   We run TFS 2010 in a Hyper-V virtual environment, so we have the advantage of running a snapshot as well as taking a DB backup. Done - Snapshot the hyper-v server Microsoft does not support taking a snapshot of a running server, for very good reason, and Brian Harry wrote a post after my last upgrade with the reason why you should never snapshot a running server. Done - Uninstall Visual Studio Team Explorer 2010 RC You will need to uninstall all of the Visual Studio 2010 RC client bits that you have on the server. Done - Uninstall TFS 2010 RC Done - Install TFS 2010 RTM Done - Configure TFS 2010 RTM Pick the Upgrade option and point it at your existing “tfs_Configuration” database to load all of the existing settings Done - Upgrade the SharePoint Extensions Upgrade Build Servers (Pending) Test the server The back out plan, and you should always have one, is to restore the snapshot. Upgrading to Team Foundation Server 2010 – Done The first thing you need to do is off the TFS server and then log into the Hyper-v server and create a snapshot. Figure: Make sure you turn the server off and delete all old snapshots before you take a new one I noticed that the snapshot that was taken before the Beta 2 to RC upgrade was still there. You should really delete old snapshots before you create a new one, but in this case the SysAdmin (who is currently tucked up in bed) asked me not to. I guess he is worried about a developer messing up his server Turn your server on and wait for it to boot in anticipation of all the nice shiny RTM’ness that is coming next. The upgrade procedure for TFS2010 is to uninstal the old version and install the new one. Figure: Remove Visual Studio 2010 Team Foundation Server RC from the system.   Figure: Most of the heavy lifting is done by the Uninstaller, but make sure you have removed any of the client bits first. Specifically Visual Studio 2010 or Team Explorer 2010.  Once the uninstall is complete, this took around 5 minutes for me, you can begin the install of the RTM. Running the 64 bit OS will allow the application to use more than 2GB RAM, which while not common may be of use in heavy load situations. Figure: It is always recommended to install the 64bit version of a server application where possible. I do not think it is likely, with SharePoint 2010 and Exchange 2010  and even Windows Server 2008 R2 being 64 bit only, I do not think there will be another release of a server app that is 32bit. You then need to choose what it is you want to install. This depends on how you are running TFS and on how many servers. In our case we run TFS and the Team Foundation Build Service (controller only) on out TFS server along with Analysis services and Reporting Services. But our SharePoint server lives elsewhere. Figure: This always confuses people, but in reality it makes sense. Don’t install what you do not need. Every extra you install has an impact of performance. If you are integrating with SharePoint you will need to run this install on every Front end server in your farm and don’t forget to upgrade your Build servers and proxy servers later. Figure: Selecting only Team Foundation Server (TFS) and Team Foundation Build Services (TFBS)   It is worth noting that if you have a lot of builds kicking off, and hence a lot of get operations against your TFS server, you can use a proxy server to cache the source control on another server in between your TFS server and your build servers. Figure: Installing Microsoft .NET Framework 4 takes the most time. Figure: Now run Windows Update, and SSW Diagnostic to make sure all your bits and bobs are up to date. Note: SSW Diagnostic will check your Power Tools, Add-on’s, Check in Policies and other bits as well. Configure Team Foundation Server 2010 – Done Now you can configure the server. If you have no key you will need to pick “Install a Trial Licence”, but it is only £500, or free with a MSDN subscription. Anyway, if you pick Trial you get 90 days to get your key. Figure: You can pick trial and add your key later using the TFS Server Admin. Here is where the real choices happen. We are doing an Upgrade from a previous version, so I will pick Upgrade the same as all you folks that are using the RC or TFS 2008. Figure: The upgrade wizard takes your existing 2010 or 2008 databases and upgraded them to the release.   Once you have entered your database server name you can click “List available databases” and it will show what it can upgrade. Figure: Select your database from the list and at this point, make sure you have a valid backup. At this point you have not made ANY changes to the databases. At this point the configuration wizard will load configuration from your existing database if you have one. If you are upgrading TFS 2008 refer to Rules To Better TFS 2010 Migration. Mostly during the wizard the default values will suffice, but depending on the configuration you want you can pick different options. Figure: Set the application tier account and Authentication method to use. We use NTLM to keep things simple as we host our TFS server externally for our remote developers.  Figure: Setting your TFS server URL’s to be the remote URL’s allows the reports to be accessed without using VPN. Very handy for those remote developers. Figure: Detected the existing Warehouse no problem. Figure: Again we love green ticks. It gives us a warm fuzzy feeling. Figure: The username for connecting to Reporting services should be a domain account (if you are on a domain that is). Figure: Setup the SharePoint integration to connect to your external SharePoint server. You can take the option to connect later.   You then need to run all of your readiness checks. These check can save your life! it will check all of the settings that you have entered as well as checking all the external services are configures and running properly. There are two reasons that TFS 2010 is so easy and painless to install where previous version were not. Microsoft changes the install to two steps, Install and configuration. The second reason is that they have pulled out all of the stops in making the install run all the checks necessary to make sure that once you start the install that it will complete. if you find any errors I recommend that you report them on http://connect.microsoft.com so everyone can benefit from your misery.   Figure: Now we have everything setup the configuration wizard can do its work.  Figure: Took a while on the “Web site” stage for some point, but zipped though after that.  Figure: last wee bit. TFS Needs to do a little tinkering with the data to complete the upgrade. Figure: All upgraded. I am not worried about the yellow triangle as SharePoint was being a little silly Exception Message: TF254021: The account name or password that you specified is not valid. (type TfsAdminException) Exception Stack Trace:    at Microsoft.TeamFoundation.Management.Controls.WizardCommon.AccountSelectionControl.TestLogon(String connectionString)    at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) [Info   @16:10:16.307] Benign exception caught as part of verify: Exception Message: TF255329: The following site could not be accessed: http://projects.ssw.com.au/. The server that you specified did not return the expected response. Either you have not installed the Team Foundation Server Extensions for SharePoint Products on this server, or a firewall is blocking access to the specified site or the SharePoint Central Administration site. For more information, see the Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=161206). (type TeamFoundationServerException) Exception Stack Trace:    at Microsoft.TeamFoundation.Client.SharePoint.WssUtilities.VerifyTeamFoundationSharePointExtensions(ICredentials credentials, Uri url)    at Microsoft.TeamFoundation.Admin.VerifySharePointSitesUrl.Verify() Inner Exception Details: Exception Message: TF249064: The following Web service returned an response that is not valid: http://projects.ssw.com.au/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. Either the extensions are not installed, the request resulted in HTML being returned, or there is a problem with the URL. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://projects.ssw.com.au. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. (type TeamFoundationServerInvalidResponseException) Exception Data Dictionary: ResponseStatusCode = InternalServerError I’ll look at SharePoint after, probably the SharePoint box just needs a restart or a kick If there is a problem with SharePoint it will come out in testing, But I will definatly be passing this on to Microsoft.   Upgrading the SharePoint connector to TFS 2010 You will need to upgrade the Extensions for SharePoint Products and Technologies on all of your SharePoint farm front end servers. To do this uninstall  the TFS 2010 RC from it in the same way as the server, and then install just the RTM Extensions. Figure: Only install the SharePoint Extensions on your SharePoint front end servers. TFS 2010 supports both SharePoint 2007 and SharePoint 2010.   Figure: When you configure SharePoint it uploads all of the solutions and templates. Figure: Everything is uploaded Successfully. Figure: TFS even remembered the settings from the previous installation, fantastic.   Upgrading the Team Foundation Build Servers to TFS 2010 Just like on the SharePoint servers you will need to upgrade the Build Server to the RTM. Just uninstall TFS 2010 RC and then install only the Team Foundation Build Services component. Unlike on the SharePoint server you will probably have some version of Visual Studio installed. You will need to remove this as well. (Coming Soon) Connecting Visual Studio 2010 / 2008 / 2005 and Eclipse to TFS2010 If you have developers still on Visual Studio 2005 or 2008 you will need do download the respective compatibility pack: Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 If you are using Eclipse you can download the new Team Explorer Everywhere install for connecting to TFS. Get your developers to check that you have the latest version of your applications with SSW Diagnostic which will check for Service Packs and hot fixes to Visual Studio as well.   Technorati Tags: TFS,TFS2010,TFS 2010,Upgrade

  Read the article

• openvpn: after changing to server mode, client does not create TUN device

  - by lurscher

  i had a previously working configuration with the config files used in a previous question However, i've changed this now to the following configuration using server mode, everything on the logs seem fine, however the client doesn't create any tun interface, so i don't have anything to connect to, presumably, i need to add or push some route commands, but i don't have any idea at this point what i need to do. I am posting all my relevant configuration files server.conf: dev tun server 10.8.117.0 255.255.255.0 ifconfig-pool-persist ipp.txt tls-server dh /home/lurscher/keys/dh1024.pem ca /home/lurscher/keys/ca.crt cert /home/lurscher/keys/vpnCh8TestServer.crt key /home/lurscher/keys/vpnCh8TestServer.key status openvpn-status.log log openvpn.log comp-lzo verb 3 and client.conf: dev tun remote my.server.com tls-client ca /home/chuckq/keys/ca.crt cert /home/chuckq/keys/vpnCh8TestClient.crt key /home/chuckq/keys/vpnCh8TestClient.key ns-cert-type server ; port 1194 ; user nobody ; group nogroup status openvpn-status.log log openvpn.log comp-lzo verb 3 the server ifconfig shows a tun device: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.117.1 P-t-P:10.8.117.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) However the client ifconfig does not show any tun interface! $ ifconfig tun0 tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) the client log says: Tue May 17 23:27:09 2011 OpenVPN 2.1.0 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 Tue May 17 23:27:09 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue May 17 23:27:09 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Tue May 17 23:27:09 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue May 17 23:27:09 2011 LZO compression initialized Tue May 17 23:27:09 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:27:09 2011 TUN/TAP device tun0 opened Tue May 17 23:27:09 2011 TUN/TAP TX queue length set to 100 Tue May 17 23:27:09 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:27:09 2011 Local Options hash (VER=V4): '41690919' Tue May 17 23:27:09 2011 Expected Remote Options hash (VER=V4): '530fdded' Tue May 17 23:27:09 2011 Socket Buffers: R=[114688->131072] S=[114688->131072] Tue May 17 23:27:09 2011 UDPv4 link local (bound): [undef] Tue May 17 23:27:09 2011 UDPv4 link remote: [AF_INET]192.168.0.101:1194 Tue May 17 23:27:09 2011 TLS: Initial packet from [AF_INET]192.168.0.101:1194, sid=8e8bdc33 f4275407 Tue May 17 23:27:09 2011 VERIFY OK: depth=1, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:09 2011 VERIFY OK: nsCertType=SERVER Tue May 17 23:27:09 2011 VERIFY OK: depth=0, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=vpnCh8TestServer/name=lurscher/[email protected] Tue May 17 23:27:09 2011 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:09 2011 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:09 2011 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:09 2011 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:09 2011 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue May 17 23:27:09 2011 [vpnCh8TestServer] Peer Connection Initiated with [AF_INET]192.168.0.101:1194 Tue May 17 23:27:10 2011 Initialization Sequence Completed the client status log: OpenVPN STATISTICS Updated,Tue May 17 23:30:09 2011 TUN/TAP read bytes,0 TUN/TAP write bytes,0 TCP/UDP read bytes,5604 TCP/UDP write bytes,4244 Auth read bytes,0 pre-compress bytes,0 post-compress bytes,0 pre-decompress bytes,0 post-decompress bytes,0 END and the server log says: Tue May 17 23:18:25 2011 OpenVPN 2.1.0 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 Tue May 17 23:18:25 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue May 17 23:18:25 2011 WARNING: --keepalive option is missing from server config Tue May 17 23:18:25 2011 NOTE: your local LAN uses the extremely common subnet address 192.168.0.x or 192.168.1.x. Be aware that this might create routing conflicts if you connect to the VPN server from public locations such as internet cafes that use the same subnet. Tue May 17 23:18:25 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Tue May 17 23:18:25 2011 Diffie-Hellman initialized with 1024 bit key Tue May 17 23:18:25 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue May 17 23:18:25 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:18:25 2011 ROUTE default_gateway=192.168.0.1 Tue May 17 23:18:25 2011 TUN/TAP device tun0 opened Tue May 17 23:18:25 2011 TUN/TAP TX queue length set to 100 Tue May 17 23:18:25 2011 /sbin/ifconfig tun0 10.8.117.1 pointopoint 10.8.117.2 mtu 1500 Tue May 17 23:18:25 2011 /sbin/route add -net 10.8.117.0 netmask 255.255.255.0 gw 10.8.117.2 Tue May 17 23:18:25 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:18:25 2011 Socket Buffers: R=[126976->131072] S=[126976->131072] Tue May 17 23:18:25 2011 UDPv4 link local (bound): [undef] Tue May 17 23:18:25 2011 UDPv4 link remote: [undef] Tue May 17 23:18:25 2011 MULTI: multi_init called, r=256 v=256 Tue May 17 23:18:25 2011 IFCONFIG POOL: base=10.8.117.4 size=62 Tue May 17 23:18:25 2011 IFCONFIG POOL LIST Tue May 17 23:18:25 2011 vpnCh8TestClient,10.8.117.4 Tue May 17 23:18:25 2011 Initialization Sequence Completed Tue May 17 23:27:22 2011 MULTI: multi_create_instance called Tue May 17 23:27:22 2011 192.168.0.104:1194 Re-using SSL/TLS context Tue May 17 23:27:22 2011 192.168.0.104:1194 LZO compression initialized Tue May 17 23:27:22 2011 192.168.0.104:1194 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:27:22 2011 192.168.0.104:1194 Local Options hash (VER=V4): '530fdded' Tue May 17 23:27:22 2011 192.168.0.104:1194 Expected Remote Options hash (VER=V4): '41690919' Tue May 17 23:27:22 2011 192.168.0.104:1194 TLS: Initial packet from [AF_INET]192.168.0.104:1194, sid=8972b565 79323f68 Tue May 17 23:27:22 2011 192.168.0.104:1194 VERIFY OK: depth=1, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:22 2011 192.168.0.104:1194 VERIFY OK: depth=0, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:22 2011 192.168.0.104:1194 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue May 17 23:27:22 2011 192.168.0.104:1194 [vpnCh8TestClient] Peer Connection Initiated with [AF_INET]192.168.0.104:1194 Tue May 17 23:27:22 2011 vpnCh8TestClient/192.168.0.104:1194 MULTI: Learn: 10.8.117.6 -> vpnCh8TestClient/192.168.0.104:1194 Tue May 17 23:27:22 2011 vpnCh8TestClient/192.168.0.104:1194 MULTI: primary virtual IP for vpnCh8TestClient/192.168.0.104:1194: 10.8.117.6 finally, the server status log: OpenVPN CLIENT LIST Updated,Tue May 17 23:36:25 2011 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since vpnCh8TestClient,192.168.0.104:1194,4244,5604,Tue May 17 23:27:22 2011 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.117.6,vpnCh8TestClient,192.168.0.104:1194,Tue May 17 23:27:22 2011 GLOBAL STATS Max bcast/mcast queue length,0 END

  Read the article

• IIS Strategies for Accessing Secured Network Resources

  - by ErikE

  Problem: A user connects to a service on a machine, such as an IIS web site or a SQL Server database. The site or the database need to gain access to network resources such as file shares (the most common) or a database on a different server. Permission is denied. This is because the user the service is running under doesn't have network permissions in the first place, or if it does, it doesn't have rights to access the remote resource. I keep running into this problem over and over again and am tired of not having a really solid way of handling it. Here are some workarounds I'm aware of: Run IIS as a custom-created domain user who is granted high permissions If permissions are granted one file share at a time, then every time I want to read from a new share, I would have to ask a network admin to add it for me. Eventually, with many web sites reading from many shares, it is going to get really complicated. If permissions are just opened up wide for the user to access any file shares in our domain, then this seems like an unnecessary security surface area to present. This also applies to all the sites running on IIS, rather than just the selected site or virtual directory that needs the access, a further surface area problem. Still use the IUSR account but give it network permissions and set up the same user name on the remote resource (not a domain user, a local user) This also has its problems. For example, there's a file share I am using that I have full rights to for sharing, but I can't log in to the machine. So I have to find the right admin and ask him to do it for me. Any time something has to change, it's another request to an admin. Allow IIS users to connect as anonymous, but set the account used for anonymous access to a high-privilege one This is even worse than giving the IIS IUSR full privileges, because it means my web site can't use any kind of security in the first place. Connect using Kerberos, then delegate This sounds good in principle but has all sorts of problems. First of all, if you're using virtual web sites where the domain name you connect to the site with is not the base machine name (as we do frequently), then you have to set up a Service Principal Name on the webserver using Microsoft's SetSPN utility. It's complicated and apparently prone to errors. Also, you have to ask your network/domain admin to change security policy for both the web server and the domain account so they are "trusted for delegation." If you don't get everything perfectly right, suddenly your intended Kerberos authentication is NTLM instead, and you can only impersonate rather than delegate, and thus no reaching out over the network as the user. Also, this method can be problematic because sometimes you need the web site or database to have permissions that the connecting user doesn't have. Create a service or COM+ application that fetches the resource for the web site Services and COM+ packages are run with their own set of credentials. Running as a high-privilege user is okay since they can do their own security and deny requests that are not legitimate, putting control in the hands of the application developer instead of the network admin. Problems: I am using a COM+ package that does exactly this on Windows Server 2000 to deliver highly sensitive images to a secured web application. I tried moving the web site to Windows Server 2003 and was suddenly denied permission to instantiate the COM+ object, very likely registry permissions. I trolled around quite a bit and did not solve the problem, partly because I was reluctant to give the IUSR account full registry permissions. That seems like the same bad practice as just running IIS as a high-privilege user. Note: This is actually really simple. In a programming language of your choice, you create a class with a function that returns an instance of the object you want (an ADODB.Connection, for example), and build a dll, which you register as a COM+ object. In your web server-side code, you create an instance of the class and use the function, and since it is running under a different security context, calls to network resources work. Map drive letters to shares This could theoretically work, but in my mind it's not really a good long-term strategy. Even though mappings can be created with specific credentials, and this can be done by others than a network admin, this also is going to mean that there are either way too many shared drives (small granularity) or too much permission is granted to entire file servers (large granularity). Also, I haven't figured out how to map a drive so that the IUSR gets the drives. Mapping a drive is for the current user, I don't know the IUSR account password to log in as it and create the mappings. Move the resources local to the web server/database There are times when I've done this, especially with Access databases. Does the database have to live out on the file share? Sometimes, it was just easiest to move the database to the web server or to the SQL database server (so the linked server to it would work). But I don't think this is a great all-around solution, either. And it won't work when the resource is a service rather than a file. Move the service to the final web server/database I suppose I could run a web server on my SQL Server database, so the web site can connect to it using impersonation and make me happy. But do we really want random extra web servers on our database servers just so this is possible? No. Virtual directories in IIS I know that virtual directories can help make remote resources look as though they are local, and this supports using custom credentials for each virtual directory. I haven't been able to come up with, yet, how this would solve the problem for system calls. Users could reach file shares directly, but this won't help, say, classic ASP code access resources. I could use a URL instead of a file path to read remote data files in a web page, but this isn't going to help me make a connection to an Access database, a SQL server database, or any other resource that uses a connection library rather than being able to just read all the bytes and work with them. I wish there was some kind of "service tunnel" that I could create. Think about how a VPN makes remote resources look like they are local. With a richer aliasing mechanism, perhaps code-based, why couldn't even database connections occur under a defined security context? Why not a special Windows component that lets you specify, per user, what resources are available and what alternate credentials are used for the connection? File shares, databases, web sites, you name it. I guess I'm almost talking about a specialized local proxy server. Anyway, so there's my list. I may update it if I think of more. Does anyone have any ideas for me? My current problem today is, yet again, I need a web site to connect to an Access database on a file share. Here we go again...

  Read the article

• IIS Strategies for Accessing Secured Network Resources

  - by Emtucifor

  Problem: A user connects to a service on a machine, such as an IIS web site or a SQL Server database. The site or the database need to gain access to network resources such as file shares (the most common) or a database on a different server. Permission is denied. This is because the user the service is running as doesn't have network permissions in the first place, or if it does, it doesn't have rights to access the remote resource. I keep running into this problem over and over again and am tired of not having a really solid way of handling it. Here are some workarounds I'm aware of: Run IIS as a custom-created domain user who is granted high permissions If permissions are granted one file share at a time, then every time I want to read from a new share, I would have to ask a network admin to add it for me. Eventually, with many web sites reading from many shares, it is going to get really complicated. If permissions are just opened up wide for the user to access any file shares in our domain, then this seems like an unnecessary security surface area to present. This also applies to all the sites running on IIS, rather than just the selected site or virtual directory that needs the access, a further surface area problem. Still use the IUSR account but give it network permissions and set up the same user name on the remote resource (not a domain user, a local user) This also has its problems. For example, there's a file share I am using that I have full rights to for sharing, but I can't log in to the machine. So I have to find the right admin and ask him to do it for me. Any time something has to change, it's another request to an admin. Allow IIS users to connect as anonymous, but set the account used for anonymous access to a high-privilege one This is even worse than giving the IIS IUSR full privileges, because it means my web site can't use any kind of security in the first place. Connect using Kerberos, then delegate This sounds good in principle but has all sorts of problems. First of all, if you're using virtual web sites where the domain name you connect to the site with is not the base machine name (as we do frequently), then you have to set up a Service Principal Name on the webserver using Microsoft's SetSPN utility. It's complicated and apparently prone to errors. Also, you have to ask your network/domain admin to change security policy for the web server so it is "trusted for delegation." If you don't get everything perfectly right, suddenly your intended Kerberos authentication is NTLM instead, and you can only impersonate rather than delegate, and thus no reaching out over the network as the user. Also, this method can be problematic because sometimes you need the web site or database to have permissions that the connecting user doesn't have. Create a service or COM+ application that fetches the resource for the web site Services and COM+ packages are run with their own set of credentials. Running as a high-privilege user is okay since they can do their own security and deny requests that are not legitimate, putting control in the hands of the application developer instead of the network admin. Problems: I am using a COM+ package that does exactly this on Windows Server 2000 to deliver highly sensitive images to a secured web application. I tried moving the web site to Windows Server 2003 and was suddenly denied permission to instantiate the COM+ object, very likely registry permissions. I trolled around quite a bit and did not solve the problem, partly because I was reluctant to give the IUSR account full registry permissions. That seems like the same bad practice as just running IIS as a high-privilege user. Note: This is actually really simple. In a programming language of your choice, you create a class with a function that returns an instance of the object you want (an ADODB.Connection, for example), and build a dll, which you register as a COM+ object. In your web server-side code, you create an instance of the class and use the function, and since it is running under a different security context, calls to network resources work. Map drive letters to shares This could theoretically work, but in my mind it's not really a good long-term strategy. Even though mappings can be created with specific credentials, and this can be done by others than a network admin, this also is going to mean that there are either way too many shared drives (small granularity) or too much permission is granted to entire file servers (large granularity). Also, I haven't figured out how to map a drive so that the IUSR gets the drives. Mapping a drive is for the current user, I don't know the IUSR account password to log in as it and create the mappings. Move the resources local to the web server/database There are times when I've done this, especially with Access databases. Does the database have to live out on the file share? Sometimes, it was just easiest to move the database to the web server or to the SQL database server (so the linked server to it would work). But I don't think this is a great all-around solution, either. And it won't work when the resource is a service rather than a file. Move the service to the final web server/database I suppose I could run a web server on my SQL Server database, so the web site can connect to it using impersonation and make me happy. But do we really want random extra web servers on our database servers just so this is possible? No. Virtual directories in IIS I know that virtual directories can help make remote resources look as though they are local, and this supports using custom credentials for each virtual directory. I haven't been able to come up with, yet, how this would solve the problem for system calls. Users could reach file shares directly, but this won't help, say, classic ASP code access resources. I could use a URL instead of a file path to read remote data files in a web page, but this isn't going to help me make a connection to an Access database, a SQL server database, or any other resource that uses a connection library rather than being able to just read all the bytes and work with them. I wish there was some kind of "service tunnel" that I could create. Think about how a VPN makes remote resources look like they are local. With a richer aliasing mechanism, perhaps code-based, why couldn't even database connections occur under a defined security context? Why not a special Windows component that lets you specify, per user, what resources are available and what alternate credentials are used for the connection? File shares, databases, web sites, you name it. I guess I'm almost talking about a specialized local proxy server. Anyway, so there's my list. I may update it if I think of more. Does anyone have any ideas for me? My current problem today is, yet again, I need a web site to connect to an Access database on a file share. Here we go again...

  Read the article

• Wisdom of merging 100s of Oracle instances into one instance

  - by hoytster

  Our application runs on the web, is mostly an inquiry tool, does some transactions. We host the Oracle database. The app has always had a different instance of Oracle for each customer. A customer is a company which pays us to provide our service to the company's employees, typically 10,000-25,000 employees per customer. We do a major release every few years, and migrating to that new release is challenging: we might have a team at the customer site for a couple weeks, explaining new functionality and setting up the driving data to suit that customer. We're considering going multi-client, putting all our customers into a single shared Oracle 11g instance on a big honkin' Windows Server 2008 server -- in order to reduce costs. I'm wondering if that's advisable. There are some advantages to having separate instances for each customer. Tell me if these are bogus, please. In my rough guess about decreasing importance: Our customers MyCorp and YourCo can be migrated separately when breaking changes are made to the schema. (With multi-client, we'd be migrating 300+ customers overnight!?!) MyCorp's data can be easily backed up and (!!!) restored, without affecting other customers. MyCorp's data is securely separated from their competitor YourCo's data, without depending on developers to get the code right and/or DBAs getting the configuration right. Performance is better because the database is smaller (5,000 vs 2,000,000 rows in ~50 tables). If MyCorp's offices are (mostly) in just one region, then the MyCorp's instance can be geographically co-located there, so network lag doesn't hurt performance. We can provide better service to global clients, for the same reason. In MyCorp wants to take their database in-house, then we can easily export their instance, to get MyCorp their data. Load-balancing is easier because instances can be placed on different servers (this is with a web farm). When a DEV or QA instance is needed, it's easier to clone the real instance and anonymize the data, because there's much less data. Because they're small enough, developers can have their own instance running locally, so they can work on code while waiting at the airport and while in-flight, without fighting VPN hassles. Q1: What are other advantages of separate instances? We are contemplating changing the database schema and merging all of our customers into one Oracle instance, running on one hefty server. Here are advantages of the multi-client instance approach, most important first (my WAG). Please snipe if these are bogus: Less work for the DBAs, since they only need to maintain one instance instead of hundreds. Less DBA work translates to cheaper, our main motive for this change. With just one instance, the DBAs can do a better job of optimizing performance. They'll have time to add appropriate indexes and review our SQL. It will be easier for developers to debug & enhance the application, because there is only one schema and one app (there might be dozens of schema versions if there are hundreds of instances, with a different version of the app for each version of the schema). This reduces costs too. The alternative is having to start every debug session with (1) What version is this customer running and (2) Let's struggle to recreate the corresponding development environment, code and database. (We need a Virtual Machine that includes the code AND database instance for each patch and release!) Licensing Oracle is cheaper because it's priced per server irrespective of heft (or something -- I don't know anything about the subject). The database becomes a viable persistent store for web session data, because there is just one instance. Some database operations are easier with one multi-client instance, like finding a participant when they're hazy about which customer they (or their spouse, maybe) works for: all the names are in one table. Reporting across customers is straightforward. Q2: What are other advantages of having multiple clients in one instance? Q3: Which approach do you think is better (why)? Instance per customer, or all customers in one instance? I'm concerned that having one multi-client instance makes migration near-impossible, and that's a deal killer... ... unless there is a compromise solution like having two multi-client instances, the old and the new. In that case case, we would design cross-instance solutions for finding participants, reporting, etc. so customers could go from one multi-client instance to the next without anything breaking. THANKS SO MUCH for your collective advice! This issue is beyond me -- but not beyond the collective you. :) Hoytster

  Read the article

• Multiple routers, subnets, gateways etc

  - by allentown

  My current setup is: Cable modem dishes out 13 static IP's (/28), a GB switch is plugged into the cable modem, and has access to those 13 static IP's, I have about 6 "servers" in use right now. The cable modem is also a firewall, DHCP server, and 3 port 10/100 switch. I am using it as a firewall, but not currently as a DHCP server. I have plugged into the cable modem, two network cables, one which goes to the WAN port of a Linksys Dual Band Wireless 10/100/1000 router/switch. Into the linksys are a few workstations, a few printers, and some laptops connecting to wifi. I set the Linksys to use take static IP, and enabled DHCP for the workstations, printers, etc in 192.168.1.1/24. The network for the Linksys is mostly self contained, backups go to a SAN, on that network, it all happens through that switch, over GB. But I also get internet access from it as well via the cable modem using one static IP. This all works, however, I can not "see" the static IP machines when I am on the Linksys. I can get to them via ssh and other protocols, and if I want to from "outside", I open holes, like 80, 25, 587, 143, 22, etc. The second wire, from the cable modem/fireall/switch just uplinks to the managed GB switch. What are the pros and cons of this? I do not like giving up the static IP to the Linksys. I basically have a mixed network of public servers, and internal workstations. I want the public servers on public IP's because I do not want to mess with port forwarding and mappings. Is it correct also, that if someone breaches the Linksys wifi, they still would have a hard time getting to the static IP range, just by nature of the network topology? Today, just for a test, I toggled on the DHCP in the firewall/cable modem at 10.1.10.1/24 range, the Linksys is n the 192.168.1.100/24 range. At that point, all the static IP machines still had in and out access, but Linksys was unreachable. The cable modem only has 10/100 ports, so I will not plug anything but the network drop into it, which is 50Mb/10Mb. Which makes me think this could be less than ideal, as transfers from the workstation network to the server network will be bottlenecked at 100Mb when I have 1000Mb available. I may not need to solve that, if isolation is better though. I do not move a lot of data, if any, from Linsys network to server network, so for it to pretend to be remote is ok. Should I approach this any different? I could enable DHCP on the cable modem/firewall, it should still send out the statics to the GB switch, but will also be a DHCP in 10.1.10.1/24 range? I can then plug the Linksys into the GB switch, which is now picking up statics and the 10.1.10.1/24 ranges, tell the Linksys to use 10.1.10.5 or so. Now, do I disable DHCP on the Linksys, and the cable modem/firewall will pass through the statics and 10.0.10.1/24 ranges as well? Or, could I open a second DHCP pool on the Linksys? I guess doing so gives me network isolation again, but it is just the reverse of what I have now. But I get out of the bottleneck, not that the Linksys could ever really touch real GB speeds anyway, but the managed switch certainly can. This is all because 13 statics are not that many. Right now, 6 "servers", the Linksys, a managed switch, a few SSL certs, and I am running out. I do not want to waste a static IP on the managed GB switch, or the Linksys, unless it provides me some type of benefit. Final question, under my current setup, if I am on a workstation, sitting at 192.168.1.109, the Linksys, with GB, and I send a file over ssh to the static IP machine, is that literally leaving the internet, and coming back in, or does it stay local? To me it seems like: Workstation (192.168.1.109) -> Linksys DHCP -> Linksys Static IP -> Cable Modem -> Server ( and it hits the 10/100 ports on the cable modem, slowing me down. But does it round trip the network, leave and come back in, limiting me to the 50/10 internet speeds? *These are all made up numbers, I do not use default router IP's as I will one day add a VPN, and do not want collisions. I need some recommendations, do I want one big network, or two isolated ones. Printers these days need an IP, everything does, I can not get autoconf/bonjour to be reliable on most printers. but I am also not sure I want the "server" side of my operation to be polluted by the workstation side of my operation. Unless there is some magic subetting I have not learned yet, here is what I am thinking: Cable modem 10/100, has 13 static IP, publicly accessible -> Enable DHCP on the cable modem -> Cable modem plugs into managed switch -> Managed switch gets 10.1.10.1 ssh, telnet, https admin management address -> Managed switch sends static IP's to to servers -> Plug Linksys into managed switch, giving it 10.1.10.2 static internally in Linksys admin -> Linksys gets assigned 10.1.10.x as its DHCP sending range -> Local printers, workstations, iPhones etc, connect to this -> ( Do I enable DHCP or disable it on the Linksys, just define a non over lapping range, or create an entirely new DHCP at 10.1.50.0/24, I think I am back isolated again with that method too? ) Thank you for any suggestions. This is the first time I have had to deal with less than a /24, and most are larger than that, but it is just a drop to a cabinet. Otherwise, it's a router, a few repeaters, and soho stuff that is simple, with one IP. I know a few may suggest going all DHCP on the servers, and I may one day, just not now, there has been too much moving of gear for me to be interested in that, and I would want something in the Catalyst series to deal with that.

  Read the article

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• CodePlex Daily Summary for Thursday, March 03, 2011

  CodePlex Daily Summary for Thursday, March 03, 2011Popular ReleasesDDRMenu: 01.99.00 (aka 2.0 beta 1): First beta of version 2.0.AutoLoL: AutoLoL v1.6.0: Implemented 3D Model / Skin viewer Added JarvanIV and Maokai Fixed Renekton and Karma image sizes Added more hotkeys to Auto Chat Fix: Update information is now cached daily (instead of forever)Chirpy - VS Add In For Handling Js, Css, DotLess, and T4 Files: Margogype Chirpy (ver 2.0): Chirpy loves Americans. Chirpy hates Americanos.Document.Editor: 2011.9: Whats new for Document.Editor 2011.9: New Templates System New Plug-in System New Replace dialog New reset settings Minor Bug Fix's, improvements and speed upsTortoiseHg: TortoiseHg 2.0: TortoiseHg 2.0 is a complete rewrite of TortoiseHg 1.1, switching from PyGtk to PyQtSandcastle Help File Builder: SHFB v1.9.2.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. NOTE: The included help file and the online help have not been completely updated to reflect all changes in this release. A refresh will be issue...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...SQL Server Compact Toolbox: Standalone version 2.0 for SQL Server Compact 4.0: Download the Visual Studio add-in for SQL Server Compact 4.0 and 3.5 from here Standalone version of (most of) the same functionality as the add-in, for SQL Server Compact 4.0. Useful for anyone not having Visual Studio Professional or higher installed. Requires .NET 4.0. Any feedback much appreciated.Claims Based Identity & Access Control Guide: Drop 1 - Claims Identity Guide V2: Highlights of drop #1 This is the first drop of the new "Claims Identity Guide" edition. In this release you will find: All previous samples updated and enhanced. All code upgraded to .NET 4 and Visual Studio 2010. Extensive cleanup. Refactored Simulated Issuers: each solution now gets its own issuers. This results in much cleaner and simpler to understand code. Added Single Sign Out support. Added first sample using ACS ("ACS as a Federation Provider"). This sample extends the ori...Simple Notify: Simple Notify Beta 2011-02-25: Feature: host the service with a single click in console Feature: host the service as a windows service Feature: notification cient application Feature: push client application Feature: push notifications from your powershell script Feature: C# wrapper libraries for your applicationsMono.Addins: Mono.Addins 0.6: The 0.6 release of Mono.Addins includes many improvements, bug fixes and new features: Add-in engine Add-in name and description can now be localized. There are new custom attributes for defining them, and can also be specified as xml elements in an add-in manifest instead of attributes. Support for custom add-in properties. It is now possible to specify arbitrary properties in add-ins, which can be queried at install time (using the Mono.Addins.Setup API) or at run-time. Custom extensio...Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.New ProjectsARCHFORMEMVC - Just a reference MVC architecture for me and perhaps you: ARCHFORMEMVC stands for giving me (and perhaps you) a default architecture for handling Cross Cutting Concerns and a quick way to start new project using MVCBackupLib: SingularityShift.BackupLib provides a framework for an application's backup needs. It offers common interfaces, abstract implementations, and many base classes ready for use in any .NET application. It can be easily extended to use any backup method you might require.ComponentModel: ComponentModel provides a simple API for building an application based on a hierarchy of various types of components, which are then extended to fill essentially any need. It attempts to simplify much of the work of building such a system.DataModels: DataModels is a project which aims to allow for easy reuse of specific data models using a very simple API. euler 14 problem: euler 14 problemGameLib: GameLib is a library for rapid game tool development. It offers an API and many abstract/concrete implementations for referencing and managing a game and its modifications. It is the driving force behind FOMS (Fallout Mod Studio).GSH Reasoner: GSHR (Gloriously Slow Haskell Reasoner) is a simple, partially incomplete and very slow reasoner for OWL 2 ontologies which uses rules for inference and consistency checking. Written in Haskell.internal DataBase for C# and .Net/Mono: This Project will create a DataBase which can only be used intern in a programm, so there is no need to have a DB installed on the users pc. SQL Support will come too. So u can eaasily migrate existing projects.Morro.VPN: morro bay various netMovieManager: Movie manager is a tool to keep you updated about movie series you watch. First step is to create your movie series database. Next you select episodes you already watched. Program will automatically show you new episodes, air dates of the upcoming episodes.NHL.App: NHL.App makes it easier for people to browse news in the NHL and current standings in a format that is nice and easy on the eyes. It is developed in C# with Visual Studio 2010 Express for Windows Phone.RegexRenamer: RegexRenamer allows file moving and renaming using .NET regular expressions. It supports regular expression chains so files can be renamed/moved in multiple steps. It is developed in C# using .NET Framework 4 and WPF.Research: Personal research projectSAB BizTalk Archiving Pipeline Component: The SAB BizTalk Archiving Pipeline Component can be added to any stage of receive and send ports to archive processed messages to file locations.Simple Configuration Facade: SingularityShift.Preferences is an abstraction layer over any configuration library allowing you to keep whichever configuration library you choose out of your main code entirely, so you are free to change it later without repercussion or the need to make extensive code changes.Simple Dependency Injection Facade: SDIF allows decoupling not only from your dependencies, but also from the framework that injects them. It is a lightweight layer between your code and the DI framework that wires up your dependencies, so that you can easily adapt to other frameworks as necessary.Simple Json: A simple set of utilities for json and rest.SingularityShift.Common: SingularityShift.Common is where we put all of the code that we use in many or all of our other libraries and applications. This obviously helps us, but is also designed to help other developers by providing these common interfaces and classes for use in other projects as well.TLDRML: Python/JSON inspired markup language designed to be extremely terse.TripleA for Silverlight: Axis and allies port from the Java versionWCF Credentials Manager in WPF (MVVM): This is a WPF (MVVM) version of the IDesign WCF credentials manager. It provides a more responsive user interface for managing users and roles in applications that use the ASP.NET membership and role providers.Windawesome: A highly customizable dynamic window manager for Windows, which works on top of explorer.exe and NOT as a shell replacement. Written in C# and scriptable and pluggable in IronRuby, IronPython and any .NET language that compiles down to an assembly.Zack's Fiasco - eWallet to KeePass: Convert an eWallet export to a KeePass 2.x XML file, which can be imported into KeePass 2.x

  Read the article

• Hosted bug tracking system with mercurial repositories (Summary of options & request for opinions)

  - by Mark Booth

  The Question What hosted mercurial repository/bug tracking system or systems have you used? Would you recommend it to others? Are there serious flaws, either in the repository hosting or the bug tracking features that would make it difficult to recommend it? Do you have any other experiences with it or opinions of it that you would like to share? If you have used other non mercurial hosted repository/bug tracking systems, how does it compare? (If I understand correctly, the best format for this type of community-wiki style question is one answer per option, if you have experienced if several) Background I have been looking into options for setting up a bug/issue tracking database and found some valuable advice in this thread and this. But then I got to thinking that a hosted solution might not only solve the problem of tracking bugs, but might also solve the problem we have accessing our mercurial source code repositories while at customer sites around the world. Since we currently have no way to serve mercurial repositories over ssl, when I am at a customer site I have to connect my laptop via VPN to my work network and access the mercurial repositories over a samba share (even if it is just to synce twice a day). This is excruciatingly slow on high latency networks and can be impossible with some customers' firewalls. Even if we could run a TRAC or Redmine server here (thanks turnkey), I'm not sure it would be much quicker as our internet connection is over-stretched as it is. What I would like is for developers to be able to be able to push/pull to/from a remote repository, servicing engineers to be able to pull from a remote repository and for customers (both internal and external) to be able to submit bug/issue reports. Initial options The two options I found were Assembla and Jira. Looking at Assembla I thought the 'group' price looked reasonable, but after enquiring, found that each workspace could only contain a single repository. Since each of our products might have up to a dozen repositories (mostly for libraries) which need to be managed seperately for each product, I could see it getting expensive really quickly. On the plus side, it appears that 'users' are just workspace members, so you can have as many client users (people who can only submit support tickets and track their own tickets) without using up your user allocation. Jira only charges based on the number of users, unfortunately client users also count towards this, if you want them to be able to track their tickets. If you only want clients to be able to submit untracked issues, you can let them submit anonymously, but that doesn't feel very professional to me. More options Looking through MercurialHosting page that @Paidhi suggested, I've added the options which appear to offer private repositories, along with another that I found with a web search. Prices are as per their website today (29th March 2010). Corrections welcome in the future. Anyway, here is my summary, according to the information given on their websites: Assembla, http://www.assembla.com/, looks to be a reasonable price, but suffers only one repository per workspace, so three projects with 6 repos each would use up most of the spaces associated with a $99/month professional account (20 spaces). Bug tracking is based on Trac. Mercurial+Trac support was announced in a blog entry in 2007, but they only list SVN and Git on their Features web page. Cost: $24, $49, $99 & $249/month for 40, 40, unlimited, unlimited users and 1, 10, 20, 100 workspaces. SSL based push/pull? Website https login. BitBucket, http://bitbucket.org/plans/, is primarily a mercurial hosting site for open source projects, with SSL support, but they have an integrated bug tracker and they are cheap for private repositories. It has it’s own issues tracker, but also integrates with Lighthouse & FogBugz. Cost: $0, $5, $12, $50 & $100/month for 1, 5, 15, 25 & 150 private repositories. SSL based push/pull. No https on website login, but supports OpenID, so you can chose an OpenID provider with https login. Codebase HQ, http://www.codebasehq.com/, supports Hg and is almost as cheap as BitBucket. Cost: £5, £13, £21 & £40/month for 3, 15, 30 & 60 active projects, unlimited repositories, unlimited users (except 10 users at £5/month) and 0.5, 2, 4 & 10GB. SSL based push/pull? Website https login? Firefly, http://www.activestate.com/firefly/, by ActiveState looks interesting, but the website is a little light on details, such as whether you can only have one repository per project or not. Cost: $9, $19, & £39/month for 1, 5 & 30 private projects, with a 0.5, 1.5 & 3 GB storage limit. SSL based push/pull? Website https login. Jira, http://www.atlassian.com/software/jira/, isn’t limited by the number of repositories you can have, but by ‘user’. It could work out quite expensive if we want client users to be able to track their issues, since they would need a full user account to be created for them. Also, while there is a Mercurial extension to support jira, there is no ‘Advanced integration’ for Mercurial from Atlassian Fisheye. Cost: $150, $300, $400, $500, $700/month for 10, 25, 50, 100, 100+ users. SSL based push/pull? Website https login. Kiln & FogBugz On Demand, http://fogcreek.com/Kiln/IntrotoOnDemand.html, integrates Kilns mercurial DVCS features with FogBugz, where the combined package is much cheaper than the component parts. Also, the Fogbugz integration is supposedly excellent. *8’) Cost: £30/developer/month ($5/d/m more than either on their own). SSL based push/pull? SourceRepo, http://sourcerepo.com/, also supports HG and is even cheaper than BitBucket & Codebase. Cost: $4, $7 & $13/month for 1, unlimited & unlimited repositories/trac/redmine instances and 500MB, 1GB & 3GB storage. SSL based push/pull. Website https login. Edit: 29th March 2010 & Bounty I split this question into sections, made the questions themselves more explicit, added other options from the research I have done since my first posting and made this community wiki, since I now understand what CW is for. *8') Also, I've added a bounty to encourage people to offer their opinions. At the end of the bounty period, I will award the bounty to whoever writes the best review (good or bad), irrespective of the number of up/down votes it gets. Given that it's probably more important to avoid bad providers than find the absolute best one, 'bad reviews' could be considered more important than good ones.

  Read the article

• Set up linux box for secure local hosting a-z

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms Virtualhosts In the rssh section above I added a user to use for SFTP. In this users' home directory, I created a folder called 'https'. This is where the documents for this site will live, so I need to add a virtualhost that will point to it. I will use the above virtual interface for this site (herein called dev.site.local). vi /etc/http/conf/httpd.conf Add the following to the end of httpd.conf: <VirtualHost 192.168.1.3:80> ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> I put a dummy index.html file in the https directory just to check everything out. I tried browsing to it, and was met with permission denied errors. The logs only gave an obscure reference to what was going on: [Mon May 17 14:57:11 2010] [error] [client 192.168.1.100] (13)Permission denied: access to /index.html denied I tried chmod 777 et. al., but to no avail. Turns out, I needed to chmod+x the https directory and its' parent directories. chmod +x /home chmod +x /home/dev chmod +x /home/dev/https This solved that problem. DNS I'm handling DNS via our local Windows Server 2003 box. However, the CentOS documentation for BIND can be found here: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-bind.html SSL To get SSL working, I changed the following in httpd.conf: NameVirtualHost 192.168.1.3:443 #make sure this line is in httpd.conf <VirtualHost 192.168.1.3:443> #change port to 443 ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Unfortunately, I keep getting (Error code: ssl_error_rx_record_too_long) errors when trying to access a page with SSL. As JamesHannah gracefully pointed out below, I had not set up the locations of the certs in httpd.conf, and thusly was getting the page thrown at the broswer as the cert making the browser balk. So first, I needed to set up a CA and make certificate files. I found a great (if old) walkthrough on the process here: http://www.debian-administration.org/articles/284. Here are the relevant steps I took from that article: mkdir /home/CA cd /home/CA/ mkdir newcerts private echo '01' > serial touch index.txt #this and the above command are for the database that will keep track of certs Create an openssl.cnf file in the /home/CA/ dir and edit it per the walkthrough linked above. (For reference, my finished openssl.cnf file looked like this: http://pastebin.com/raw.php?i=hnZDij4T) openssl req -new -x509 -extensions v3_ca -keyout private/cakey.pem -out cacert.pem -days 3650 -config ./openssl.cnf #this creates the cacert.pem which gets distributed and imported to the browser(s) Modified openssl.cnf again per walkthrough instructions. openssl req -new -nodes -out dev.req.pem -config ./openssl.cnf #generates certificate request, and key.pem which I renamed dev.key.pem. Modified openssl.cnf again per walkthrough instructions. openssl ca -out dev.cert.pem -config ./openssl.cnf -infiles dev.req.pem #create and sign certificate. cp dev.cert.pem /home/dev/certs/cert.pem cp dev.key.pem /home/certs/key.pem I updated httpd.conf to reflect the certs and turn SSLEngine on: NameVirtualHost 192.168.1.3:443 <VirtualHost 192.168.1.3:443> ServerAdmin [email protected] DocumentRoot /home/dev/https SSLEngine on SSLCertificateFile /home/dev/certs/cert.pem SSLCertificateKeyFile /home/dev/certs/key.pem ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Put the CA cert.pem in a web-accessible place, and downloaded/imported it into my browser. Now I can visit https://dev.site.local with no errors or warnings. And this is where I'm at. I will keep editing this as I make progress. Any tips on how to configure SSL email would be appreciated.

  Read the article

• You Might Be a DBA

  - by BuckWoody

  With all apologies to Jeff Foxworthy, I was up late Friday night on a holiday weekend (which translated into T-SQL becomes “Maintenance Window”) and I got bored in between the two or three minutes I had between clicks. So I started a “Twitter” meme – and it just took off. I haven’t cleaned these up much, but here, in author order as of Saturday the 29th of May is the list “You might be a DBA” from around the Twitterverse: buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA  buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA  buckwoody You have at least one set of scripts you won't share #youmightbeaDBA  buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA  buckwoody You have children older than the rest of your team #youmightbeaDBA  buckwoody You and the Oracle DBA would kill each other, but you'll happily fight off a developer together first #youmightbeaDBA  buckwoody You've threatened to quit if they give anyone the sa password on production #youmightbeaDBA  buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA  buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA  buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA  buckwoody You have at least one set of scripts you won't share #youmightbeaDBA  buckwoody You refer to co-workers as "carbon-units" #youmightbeaDBA  buckwoody Being paranoid is on your resume at the top #youmightbeaDBA  buckwoody Everyone comes to your cube to find the MSDN DVD's #youmightbeaDBA  buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA  buckwoody You've worn down developers to get your way by explaining normalization levels #youmightbeaDBA  buckwoody You refer to clothes as "Data Abstractions" #youmightbeaDBA  buckwoody Users pester you to be able to put data in a database, then they pester you to take it out and put it in Excel #youmightbeaDBA  buckwoody Others try to de-duplicate data, you try to copy it to more than three locations #youmightbeaDBA  buckwoody You have at least one DLT tape in the trunk of your car #youmightbeaDBA  buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA  buckwoody Your spouse knows what "ETL" means #youmightbeaDBA  buckwoody You've referred to yourself as the "Data Janitor" #youmightbeaDBA  buckwoody You don't have positive connotations of the word "upgrade" #youmightbeaDBA  buckwoody You get your coffee before you check your servers, because you know you won't get any if you don't #youmightbeaDBA  buckwoody You always come to work through the back door so no one hijacks you on the way to your cube #youmightbeaDBA  buckwoody You check your server logs before you check your e-mail in the morning so you can reply "Yeah, I already fixed that." #youmightbeaDBA  buckwoody You have more conference badges than clean socks #youmightbeaDBA  buckwoody Your coffee mug says "It depends" #youmightbeaDBA  buckwoody You can convince a boss that you need 16GB of RAM in your laptop #youmightbeaDBA  buckwoody You've used ebay to find production equipment #youmightbeaDBA  buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA  buckwoody You know when your company is acquiring another even before the CFO #youmightbeaDBA  buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA  buckwoody You call aspirin "work vitamins" #youmightbeaDBA  buckwoody You get the same amount of sleep even after you have a child #youmightbeaDBA  buckwoody You obsess about performance metrics from over one year ago #youmightbeaDBA  buckwoody The first thing you buy after the database software is aftermarket tools to manage the database software #youmightbeaDBA  buckwoody You've tried to convince someone else to become a DBA #youmightbeaDBA  buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA  buckwoody You only know other DBA's by their Tweet Handle #youmightbeaDBA  buckwoody You've explained the difference between 32 and 64-bit to more than one manager in terms they can understand, using puppets #youmightbeaDBA  buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA  buckwoody You've driven to the Datacenter to install SQL Server because "you don't trust those NOC admins" #youmightbeaDBA  buckwoody You pay more for faster Internet connections than cable at home so you don't have to drive in #youmightbeaDBA  buckwoody You call texting a "queuing system" #youmightbeaDBA  buckwoody You know that if someone can read Perl, they manage an Oracle system #youmightbeaDBA  buckwoody You have an e-mail rule for backup notifications #youmightbeaDBA  buckwoody Your food pyramid includes coffee, salt and fat #youmightbeaDBA  buckwoody You wish everything had a graphical query plan #youmightbeaDBA  buckwoody You refactor your e-mails #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA  buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody You've written blog posts on technology you've never actually implemented in production #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody @MidnightDBA Click the #youmightbeaDBA tag. I've had WAY too much coffee today.  buckwoody There is no other position that is 1-deep except you and the CEO #youmightbeaDBA  buckwoody When you watch "The Office" you call it "OJT" #youmightbeaDBA  buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA  buckwoody Your blog would make a "best practices" or "worst practices" book #youmightbeaDBA  buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA  buckwoody The first thing you install on your netbook is SSMS #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody Your watch is set to UTC because it's just easier #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA  buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA  buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody * == bad #youmightbeaDBA  buckwoody * == bad #youmightbeaDBA  buckwoody There are just as many females in your technical field as males #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA  buckwoody You refer to time as a "Clustered Index" #youmightbeaDBA  buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA  buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA  buckwoody You think a millisecond is a really long time #youmightbeaDBA  buckwoody You're sitting and typing #youmightbeaDBA when you could be outside #youmightbeaDBA  buckwoody You can't wait for a technical conference so you can wear a kilt - and you're not Scottish #youmightbeaDBA  buckwoody You know that "DBA" stands for "Default Blame Acceptor" #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You know what "the truth, thole truth and nothing but the truth, so help me Codd" means #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You can't talk fast enough to get a concept out of your head so you tweet it instead #youmightbeaDBA  buckwoody You cry when someone doesn't use a WHERE clause #youmightbeaDBA  buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA  buckwoody You think "Set theory" is not an verb but a noun #youmightbeaDBA  buckwoody You try to convince random strangers to vote on your Connect item #youmightbeaDBA  buckwoody You think 3 hours of contiguous sleep is a good thing #youmightbeaDBA or #youmightbeamother  buckwoody You don't like Oracle, and not just because of what she did to Neo #youmightbeaDBA  buckwoody You know when to say "sequel" and "s-q-l" #youmightbeaDBA  buckwoody You know where the data is #youmightbeaDBA  buckwoody You refer to your children as "Fully Redundant Mirrors" #youmightbeaDBA  buckwoody Holiday == "Maintenance Window" #youmightbeaDBA  buckwoody Your laptop is more powerful than the servers in most companies - including your own #youmightbeaDBA  buckwoody You capitalize SELECTed words #youmightbeaDBA  buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA  buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA  buckwoody You cringe in public when the word "upgrade" is used in a sentence #youmightbeaDBA  buckwoody Holiday == "Maintenance Window" #youmightbeaDBA  buckwoody All Data Is MetaData means something to you #youmightbeaDBA  buckwoody You've never seen the driveway to your house in the daylight #youmightbeaDBA  buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA  buckwoody Most of your bloodstream is composed of caffeine #youmightbeaDBA  buckwoody Your task list is labeled "CRUD Matrix" #youmightbeaDBA  buckwoody You call your wife/husband a "Linked Server" #youmightbeaDBA  anonythemouse When someone tells you they are going to take a dump and you wonder of which database then #youmightbeaDBA  anonythemouse When it's 11pm on a holiday weekend and you are working #youmightbeaDBA  anonythemouse When you sit down at a table and look for it's primary key #youmightbeaDBA  anonythemouse When getting milk from the fridge you check the expiry date is > getdate() #youmightbeaDBA  blakmk when you wake up dreaming about sql #youmightbeaDBA  CharlesGarver You think a @buckwoody bobblehead would be a cool thing to have on the dashboard of your car #youmightbeaDBA  CharlesGarver Your friends don't understand why you think there's a difference between single and double quotes #youmightbeaDBA  CharlesGarver Even the newest employees know your name from all the downtime notices you've sent out #youmightbeaDBA  CharlesGarver You sometimes feel anxious and think "I should test restoring those backups" and then the feeling passes #youmightbeadba  CharlesGarver You know what a co-worker means when they ask "how is your squirrel server?" #youmightbeadba  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver You're willing to move someone's job up in priority for a box of #voodoodonuts #youmightbeaDBA  CharlesGarver Each person in your company seems to think you work for THEM #youmightbeaDBA  CharlesGarver You have a Love/Hate relationship going on with #Microsoft #youmightbeaDBA  CharlesGarver People ask you to troubleshoot their Access program #youmightbeaDBA  CharlesGarver The first words you hear in the morning are 'your voicemail box is full' #youmightbeaDBA  CharlesGarver The thought of disrupting 500 people's work so you can do something doesn't phase you #youmightbeaDBA  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver Your home computer is backed up in 3 different places #youmightbeaDBA  CharlesGarver Your wardrobe for work includes pajamas #youmightbeaDBA  CharlesGarver Someone tells you to look in the INDEX and you look puzzled before finally going to the back of the book. #youmightbeaDBA  chuckboycejr If you have ever set up a SQLAgent job to email your mobile phone to serve as an alarm clock #youmightbeaDBA  chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA  chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA  chuckboycejr If you'd wrestle a SysAdmin to the ground to implement #DPA best practices as per @aspiringgeek #youmightbeaDBA  databaseguy I need to be up in 7 hours, so I'm off to bed! I'll have to read the rest of @buckwoody's #youmightbeaDBA posts in the AM. (g'night Buck!)  databaseguy When people ask you about your house, the first thing you describe is the network. #youmightbeaDBA  databaseguy The last thing you say at the office each day is, "is anybody else here? I'm shutting off the lights!" #youmightbeaDBA  databaseguy Your blood pressure rises when you read application specs drafted by marketing. #youmightbeaDBA  databaseguy A good day at work is one when nobody pays you no mind. #youmightbeaDBA  databaseguy You care about latches and wait states. #youmightbeaDBA  databaseguy You have worked over 200 hours on a performance tuning project that required no application changes at all. #youmightbeaDBA  databaseguy The late-night security guard knows the names of your spouse and kids. #youmightbeaDBA  databaseguy You have had vigorous debates about whether it should be pronounced "sequel" or "ess-queue-ell". #youmightbeaDBA  databaseguy You have VPN and RDP software installed on your phone ... just in case. #youmightbeaDBA  databaseguy You have edited a data file by hand, just to see what would happen. #youmightbeaDBA  databaseguy You decorate your office walls with database catalog posters. #youmightbeaDBA  databaseguy You've built programs that access data just to keep other developers from asking you to run queries all the time. #youmightbeaDBA  databaseguy When you watch movies like The Matrix, you find yourself calculating the fasibility of storing all that data. #youmightbeaDBA  databaseguy You have tried to convince someone to spend money on an SSD storage array. #youmightbeaDBA  databaseguy When CPU is spiked on a server, you want to gather forensic evidence. #youmightbeaDBA  databaseguy You have to remind developers not to push code to production without checking if the database is ready. #youmightbeaDBA  databaseguy Nobody cares what you wear to work, as long as the thing keeps running. #youmightbeaDBA  databaseguy Telepathy is a job requirement when working with app dev teams. #youmightbeaDBA  databaseguy You read database statistics for the educational value. #youmightbeaDBA  databaseguy And your boss freely admits this to anyone within earshot. #youmightbeaDBA  databaseguy Your boss cannot explain or understand what you do. #youmightbeaDBA  databaseguy You envision ERDs when you see a GUI. #youmightbeaDBA  databaseguy You say things like "applications come and go, but data lasts forever." #youmightbeaDBA  databaseguy You have memorized the names of several of the AdventureWorks employees. #youmightbeaDBA  databaseguy You know what MAXDOP setting you can get away with for a big query based on current server load. #youmightbeaDBA  databaseguy And you immediately recognize the recursion in my last tweet. #youmightbeaDBA  databaseguy You find 50 simultaneous tweets from @buckwoody about #youmightbeaDBA :O)  DBAishness You have "funny stories" about the times your developers accidentally deleted the T-log in their test environment. #youmightbeaDBA  DBAishness Planning to slice and dice your MDW data with PowerPivot makes you giggle like a schoolgirl. #youmightbeaDBA  donalddotfarmer You think @buckwoody lives in the "real world." #youmightbeaDBA  jamach09 @buckwoody #youmightbeaDBA Why go outside when you can sit in the nice cool server room?  jamach09 If you refer to procreation as "Replication", #youmightbeaDBA.  jamach09 If you think ORM is a four-letter word, #youmightbeaDBA  JamesMarsh If you have ever preached the value of Source Code Control, #YouMightBeADBA  jethrocarr @venzann You store your shopping list in a ACID compliant DB #youmightbeaDBA  joe_positive @buckwoody thought it stood for "Don't Bother Asking" #youmightbeaDBA  joe_positive when you check your IT Events Calendar before making weekend plans #youmightbeaDBA  LadyRuna You cringe whenever someone calls Excel a database #youmightbeaDBA  LadyRuna When the waiter says he'll be your server today, you ask how many terabytes he is #youmightbeaDBA  LadyRuna you always call the asterisk a "Star" #youmightbeaDBA  LadyRuna You walk into a server room, say "Nice RACK!" and everyone there knows you're talking about server rack... #youmightbeaDBA  LadyRuna You receive more messages from servers than from friends #youmightbeaDBA  LadyRuna hmmm... #youmightbeaDBA if your recipe for gumbo is "SELECT * FROM Refrigerator"  markjholmes @SQLSoldier Heh. #youmightbeaDBA if you correct other DBAs' spelling of @PaulRandal  markjholmes #youmightbeaDBA if you actually test RAID5 vs RAID10 on your SAN because when it comes to configuration, "it depends."  markjholmes #youmightbeaDBA if you have at least 3 definitions of the word "cluster"  MarlonRibunal 3 Words: @BrentO, snicker, & Access #youmightbeaDBA  MarlonRibunal @onpnt @mikeSQL my appeal was a couple of mins late. Enjoying #youmightbeaDBA  MarlonRibunal @mikeSQL @onpnt pls, don't mention bacon #youmightbeaDBA  merv @buckwoody You HATE 3-way joins #youmightbeaDBA  MidnightDBA If you're up at midnight Tweeting about SQL #youmightbeaDBA  MidnightDBA @buckwoody I'd noticed that. :) #youmightbeaDBA  mikeSQL when people talk about "their type" you're thinking varchar, bigint, binary, etc #youmightbeadba  mikeSQL people ask you to go to lunch , but you can't go because you're attending #SQLlunch #youmightbeadba  mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba  mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba  mrdenny If you think that @buckwoody's demo using PowerPivot to analyze index usage data from DMVs is awesome then #youmightbeaDBA  mrdenny You wish @PaulRandal still worked at Microsoft so that they would make a bobble head of him #youmightbeadba  mrdenny When it's 11pm on a holiday weekend, and your posting stupid jokes on Twitter then #youmightbeadba  mrdenny If you go out with friends and wonder why no one's wearing a kilt then #YouMightBeADBA  mrdenny You can't do basic math, but you know off the top of your head how many CALs $14,412 can buy you. #YoumightbeaDBA  mrdenny If you've ever setup a SQL Job to email you to get you out of a regularly scheduled meeting #YouMightBeADBA.  mrdenny You throw up in your mouth a little when ever you here the word "Access". Even if it doesn't relate to a MS product. #YouMightBeADBA  msdtjones You spend more time listening to @buckwoody than your wife #youmightbeaDBA  NFDotCom You perform "hail deltas" on a regular basis. #YouMightBeADBA  NoelMcKinney If you tell your wife you want to go to Columbus Ohio for your wedding anniversary so you can attend #sqlsat42 then #youmightbeaDBA  NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA  NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA  NoelMcKinney Someone asks you to throw another log on the fire and you tell them not to worry about it because Autogrowth is turned on #youmightbeaDBA  Nuurdygirl Even if you have a girlfriend...its possible #youmightbeadba. Yeah-i said its possible!  Nuurdygirl When your girlfriend has to lean around the laptop to kiss you goodnight #youmightbeadba  Old_Man_Fish If you worry about how big your package is and how long it takes to finish #youmightbeaDBA  Old_Man_Fish If you no longer wonder if someone is in trouble or died if you are getting calls at 2AM #youmightbeaDBA  Old_Man_Fish If, when you hear the word ACCESS with no connotation you blood pressure jumps 50 points, #youmightbeaDBA  onpnt When you hear the word inject you immediately get concerned if your databases are OK #youmightbeaDBA  onpnt Your servers haven't been rebooted in a year #youmightbeaDBA  onpnt You know why it's funny when @PaulRandal has the word, "Sheep" in a tweet #youmightbeaDBA  onpnt You have read BOL without actually having a problem to figure out #youmightbeaDBA  onpnt You can type "SELECT columns FROM tables" without typos but tipen ni Banglish ares a messis #youmightbeaDBA  onpnt DR strategies doesn't include the word, RAID in them #youmightbeaDBA  onpnt you can move a SQL Server instance to a new server without the users ever knowing #youmightbeaDBA  onpnt You have made an SSIS package that is more than one step #youmightbeaDBA  onpnt You have the balls to say no to your boss when they ask for the sa password #youmightbeaDBA  onpnt you google to trouble shoot a problem and end up at your own blog (and it fixes it) #youmightbeaDBA  onpnt You talk your wife into moving the family vacation a week earlier so you can attend the areas local SSUG meeting #youmightbeaDBA  onpnt you can explain to a nontechnical person what a deadlock is #youmightbeaDBA  onpnt You hope a girl asks you what your collation is #youmightbeaDBA  onpnt you make jokes that include the words shrink, truncate and 1205. And you are the only one that laughs at them #youmightbeaDBA  onpnt You rate your ability to stay awake to work longer on blogs, twitter, forums and your day to day job with the 5 9's goal #youmightbeaDBA  onpnt you have major surgery and beg the doctor to release you back to work 5 days later because you miss your servers #youmightbeaDBA #TrueStory  onpnt You do have backups and you know how to use them #youmightbeaDBA  onpnt It's the network #youmightbeaDBA  onpnt When the developers get to work your mood changes rapidly #youmightbeaDBA  onpnt When someone says, "PASS", you first think of karaoke #youmightbeaDBA  onpnt Recruiters try to get you to call them *just* because they think you'll give them @BrentO contact info #youmightbeaDBA  onpnt You chuckle every time you go to grab the "CLR" Calcium, Lime and Rust Remover to clean something #youmightbeaDBA  onpnt @MarlonRibunal @mikeSQL Sorry man, it was already in motion ;-) #youmightbeaDBA  onpnt When you have an "I love bacon" sticker on your laptop. #youmightbeaDBA http://twitpic.com/1ry671  onpnt You sing SELECT statements in the shower #youmightbeaDBA  onpnt When you see a chicken it doesn't remind you of food. It reminds you of a guy named Jorge #youmightbeaDBA  onpnt At time, SQL is your mistress #youmightbeaDBA  onpnt Your wife wonders if SQL is the code name of your mistress at times #youmightbeaDBA  onpnt it's Friday and you are on twitter thinking really hard about what would be funny for hash tag #youmightbeaDBA  onpnt You organize your wife's "decorative"pillows on the bed in a B-Tree structure #youmightbeaDBA  PaulWhiteNZ If you: SELECT TOP (1) milk FROM fridge WHERE use_by_date >= GET_DATE() ORDER BY use_by_date ASC #YouMightBeaDBA  RonDBA #youmightbeaDBA if you read @buckwoody's and @BrentO's blogs.  ryaneastabrook @buckwoody omg, you have to stand up a website with these on them, they are awesome #youmightbeaDBA  soulvy @StrateSQL @LadyRuna Or a "Splat" #youmightbeaDBA  speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA  speedracer You retweet @buckwoody on a Friday night #youmightbeaDBA  speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA  speedracer Developers make you twitch #youmightbeaDBA  sqlagentman You know what X/1024*8 is. #YouMightBeADBA  SqlAsylum Your still in the office at 5:00 on memorial day weekend. #youmightbeadba :)  SQLBob Whenever someone you know gets pregnant you bring up INNER JOINs or SQL Injection attacks... #youmightbeaDBA  SQLChicken You know one or more SQL folks in the community with an animal in their username #youmightbeaDBA  SQLChicken You've used one or more car analogies to explain how a database works #youmightbeaDBA  SQLChicken “@sqljoe: #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you” lmao nice!  SQLChicken When talking about SSIS your discussions break down into various jokes about packages #youmightbeaDBA  SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA  SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA  SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  SQLCraftsman You really own a "Stick of Much Developer Whacking" #YouMightBeADBA  SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA  SQLCraftsman Default Blame Acceptor #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  SQLCraftsman Default Blame Acceptor #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  sqljoe #youmightbeaDBA if you wished your wife knew T-sql. USE ShoppingList SELECT NecessaryItems from Supermarket WHERE Category<> ("junk food")  sqljoe #youmightbeaDBA if the first thing you kiss when you wake up is your mobile for not waking you up in the middle of the night  sqljoe #youmightbeaDBA if your wife has a "Do Not Fly" family vacation list of her own including your laptop and mobile  sqljoe #youmightbeaDBA if you have researched for DBA Anonymous groups and attended a #SSUG willing to drop your database (vice)  sqljoe #youmightbeaDBA if your only maintenance windows are staff meetings  sqljoe #youmightbeaDBA if you think of yourself as "The One" in The Matrix "balancing the equation" from The Architect's (developers) poor coding  sqljoe #youmightbeaDBA if you think @PaulRandal should have played the Oracle in The Matrix  sqljoe #youmightbeaDBA if home CD & Movie collection is stored in secured containers,in logical order & naming convention,and with a backup copy  sqljoe #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you  sqljoe #youmightbeaDBA if you have tried to TiVo @MidnightDBA broadcasts  sqljoe #youmightbeaDBA if your #sql user group feels like #AA meetings  sqljoe #youmightbeaDBA if you thought of bringing your #sql books to #sqlsaturday and #sqlpass for autographs  sqljoe #youmightbeaDBA if #sqlpass feels like the #oscars  sqljoe #youmightbeaDBA if you are proud of your small package  SQLLawman #youmightbeaDBA when you hear MDX and Acura is not first thought that comes to mind.  sqlrunner If your wife double checks that there isn't a SQLSat within 200 miles of your vacation destination #youmightbeaDBA  sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA  sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA  sqlrunner You treat the word 'access' as a verb, not a noun #youmightbeaDBA  sqlrunner If you are happy with sub-second performance #youmightbeaDBA  sqlrunner When you know the names of the NOC people AND their families #youmightbeadba  sqlrunner When you know the names of the NOC people AND their families #youmightbeadba  sqlrunner Your company set's up international phone coverage for your cruise #youmightbeaDBA  sqlsamson @buckwoody if your manager asks you for data and you respond with "there's a script for that" #youmightbeadba  sqlsamson @buckwoody If you receive more messages from your server then your spouse #youmightbeadba  SQLSoldier You've spent all night Valentines Day upgrading the SQL Servers and forgot to tell your wife you'd be working late. #youmightbeadba  SQLSoldier You're flattered when someone calls you a geek. #youmightbeadba  SQLSoldier @llangit @mrdenny it's 11pm on a holiday weekend, & your reading stupid jokes on Twitter then #youmightbeadba  SQLSoldier Your manager borrows lunch money from you because your salary is 30% higher than his. #youmightbeaDBA  SQLSoldier You think "intellisense" is a double negative because it's not intelligent nor makes sense. #youmightbeaDBA  SQLSoldier 75% of the emails you receive at home have the phrase "now following you on Twitter!" in the subject line. #youmightbeaDBA  SQLSoldier You petition Ken Burns to remake Office Space because it should have been 18 hours long. #youmightbeaDBA  SQLSoldier You select a candidate for a Jr DBA position because his resume said he's willing to get your coffee. #youmightbeaDBA  SQLSoldier Somebody misquotes @PaulRandall and you call him on your cell to verify. #youmightbeaDBA  SQLSoldier You wish the elevator in your building was slower because it's the last time you'll be left alone all day. #youmightbeaDBA  SQLSoldier The developers sacrifice small animals before giving you their code for review. #youmightbeaDBA  SQLSoldier Developers bring you coffee and a BLT when you review their code. #youmightbeaDBA #IWish  SQLSoldier You can get out of any family get-together by saying you have to work and nobody questions it. #youmightbeaDBA  SQLSoldier You've requested a HP Superdome for you "test" box. #youmightbeaDBA  SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA  SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier A dev. asks if you've heard about some great new feature in SQL and you show the 16 blog posts you wrote on it ... last year #youmightbeaDBA  SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA #TrueStory  SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA  SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA  SQLSoldier You use a cell phone service coverage map to plan your next vacation. #youmightbeaDBA  SQLSoldier You come in to work at 7 AM because it gives you at least 3 hours without any developers around. #youmightbeaDBA  SQLSoldier You figure out a way to make take your wife on a cruise and deduct it as a business expense. #youmightbeaDBA #sqlcruise  SQLSoldier You name your cat SQLDog because the name @SQLCat was already taken. #youmightbeaDBA  SQLSoldier You rate your blog posts based on the number of retweets you get. #youmightbeaDBA  SQLSoldier You disable random logins just to mess with people. #youmightbeaDBA  SQLSoldier You fall for the pickup line, "Hey baby, what's your collation?" #youmightbeaDBA  SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA  SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier Your think the 4 food groups are coffee, bacon, fast food, and Mountain Dew. #youmightbeaDBA  SQLSoldier You tell someone your job title and they ask "What?" You describe it and they ask "What?". So you say "computer geek". #youmightbeaDBA  SQLSoldier The #1 referrer to your blog is Twitter.com. #youmightbeaDBA  SQLSoldier Your idea of a good time on a Saturday involves free training. #youmightbeaDBA #sqlsat43  SQLSoldier You write a book that all of your co-workers have and none have read it. #youmightbeaDBA  SQLSoldier You write a book that sells a couple thousand copies and is heralded a best seller. #youmightbeaDBA  SQLSoldier No matter how sick you are, you go to work if it's time to pass the pager on to the next guy. #youmightbeaDBA #TrueStory  SQLSoldier You go out on the town, and strangers walk up to you and say, "Hey you're that SQL guy" #youmightbeaDBA #TrueStory  SQLSoldier Your wife asks you to fix something, and you request a downtime window. #youmightbeaDBA  SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA  SQLSoldier Your best pickup line, "Hey baby, what's your collation?" #youmightbeaDBA  SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA  SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA  SQLSoldier You list TSQL as your native language on the 2010 census. #youmightbeaDBA  SQLSoldier Starbucks' stock price drops every time you go on vacation. #youmightbeaDBA  SQLSoldier You're happy when the web master says that the website is down. #youmightbeaDBA  SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA  SQLSoldier You get mad when someone calls your car a "heap" because you've always considered it to be a "clustered index". #youmightbeaDBA  SQLSoldier Your blog has more hits than your company's website. #youmightbeaDBA  SQLSoldier You systematically remove the asterisk key from all keyboards in the company except yours. #youmightbeaDBA  SQLSoldier When asked if you recycle, you reply that you run sp_cycle_errorlog every night at midnight #youmightbeaDBA  SQLSoldier You wouldn't allow someone named @AdamMachanic to work on your car. #youmightbeaDBA  SQLSoldier You switch offices every 3 days to avoid developers #youmightbeaDBA  SQLSoldier PSS has your number on speed dial. #youmightbeaDBA  SQLSoldier You frown when you they tell Neo that he's going to the Oracle #youmightbeaDBA  swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA  swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA  Tarwn A pleasurable saturday means spending the day learning more about what you already do the rest of the week #youmightbeaDBA ...oh, wait...  thelostforum For great justice; all our base are belong to YOU !! #youmightbeadba  thelostforum @SQLSoldier: You need a witness to use a mirror #youmightbeaDBA ;)  TimCost you capitalize key words. always. everywhere. you can't help it, usually don't even notice. #youmightbeaDBA  Toshana Your the only one in your company not impressed with the developers new application. #youmightbeaDBA  venzann Coming soon from a (respected) book publisher - @buckwoody's #youmightbeaDBA  venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets...  venzann I love the #youmightbeaDBA tag. Found at least 6 new DBAs to follow..  venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets...  venzann You use #sqlhelp as a primary resource during troubleshooting #youmightbeaDBA  venzann You insist on stricter password security for your sql servers than you implement on your own laptop #youmightbeaDBA  WesBrownSQL @buckwoody you are up so late the only tweets you see are from @buckwoody #youmightbeaDBA  WesBrownSQL @SQLSoldier you are upgrading all your 2005 prod servers to 2008 R2 on a three day weekend... #youmightbeaDBA  zippy1981 #youmightbeaDBA if everytime you do something with #mongodb you think of the Vulcan proverb "only Nixon could go to China."  Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• DHCP settings out of range Internet shuts off after a few minutes

  - by user263115

  I recently upgraded from windows eight to windows 8.1 I do not know if this has anything to do with anything I have a 64 bit OS. My Internet goes off by itself every 5 minutes even though my wireless icon at the lower right of the screen still shows connected I had an error message in the last event in it said that might DHCP settings were out of range. I get my internet at my house through a wireless portable hotspot through my smart phone. But i haven't ever had any problems before and i only have this problem on this network. If i turn airplane mode on and reset my network card, the internet will come back to life but soon die. i don't experience this problem while on a different network or if i'm on WiFi. This s really annoying please help Windows IP Configuration Host Name . . . . . . . . . . . . : NastyMcnastyJr Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TeamViewer VPN Adapter Physical Address. . . . . . . . . : 00-FF-5D-13-26-21 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter Physical Address. . . . . . . . . : F6-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter SAMMY McNASTY: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter Physical Address. . . . . . . . . : F4-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3107:66bc:cf1f:c776%4(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.43.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Friday, November 1, 2013 9:50:20 PM Lease Expires . . . . . . . . . . : Saturday, November 2, 2013 12:56:46 AM Default Gateway . . . . . . . . . : 192.168.43.1 DHCP Server . . . . . . . . . . . : 192.168.43.1 DHCPv6 IAID . . . . . . . . . . . : 83146722 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-F1-98-B4-20-89-84-84-61-BB DNS Servers . . . . . . . . . . . : 192.168.43.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 20-89-84-84-61-BB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/26/2013 7:52:23 PM Event ID: 20003 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management has concluded the process to add Service vwifibus for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0. Event Xml: 20003 0 4 7005 0 0x8000000000000000 5118 System NastyMcnastyJr vwifibus \SystemRoot\system32\DRIVERS\vwifibus.sys PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 false true 0 Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/19/2013 3:29:12 PM Event ID: 20001 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management concluded the process to install driver netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0x0. Event Xml: 20001 0 4 7005 0 0x8000000000000000 2015 System NastyMcnastyJr netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf 6.30.223.102 Microsoft PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 {4D36E972-E325-11CE-BFC1-08002BE10318} false false false 0x0 Broadcom 802.11n Network Adapter Log Name: System Source: Microsoft-Windows-DNS-Client Date: 11/2/2013 12:24:59 AM Event ID: 1014 Task Category: (1014) Level: Warning Keywords: (268435456) User: NETWORK SERVICE Computer: NastyMcnastyJr Description: Name resolution for the name www.google.com timed out after none of the configured DNS servers responded. Event Xml: 1014 0 3 1014 0 0x4000000010000000 34771 System NastyMcnastyJr www.google.com 128 02000000C0A82B01000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

  Read the article

< Previous Page | 82 83 84 85 86