Search Results

Search found 3141 results on 126 pages for 'zero'.

Page 86/126 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Poor Write Performance in VM inside Proxmox PVE 2.0

  - by sorsenne

  I am running a PVE 2.0 on a decent Hardware (2 SATA HDDs as RAID1, 12GB RAM, i7 CPU) but the I/O Performance is very poor inside the VM (Ubuntu 11.10 Server). The very same VM was copied to another Server running simply Ubuntu Server with KVM and had better I/O Perf. this is how the HDD is shown in the Guest: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-8: ST3000DM001-9YN166, CC49, max UDMA/133 ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC49 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA I tested with DD: $ dd bs=1M count=128 if=/dev/zero of=test conv=fdatasync 128+0 records in 128+0 records out 134217728 bytes (134 MB) copied, 19.2222 s, 7.0 MB/s on the Host, this same Test will result with 156 MB/s in average. PS: I am using VirtIO and see no error in dmesg.

  Read the article

• eee box "drobpox" server 24/7

  - by microspino

  I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have a Samsung A4 small laser printer, a HP500 Designjet Plotter, a Samsung Multifunction Machine (fax/print/scan/copy), a modern HP color A3 Deskjet printer and a HP laserjet A4 color printer. All of them need to be connected to this mini server. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: - If You have something similar running for a long time - If You disagree with this hardware choice and If You would suggest some other device. - If You see any issues with my printing setup - Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

  Read the article

• Batch copy gives errors, xcopy works fine

  - by ndm13

  I am writing a general file backup program. It searches the drive for files matching a set of types and then writes them to a folder on the desktop. I wrote it using xcopy on Windows XP but upon learning that xcopy was deprecated in favor of robocopy in Vista and newer, still wanting to maintain compatibility I decided to switch to the non-deprecated copy. This is where the problems begin. I'm trying to fix the copy routine. I thought I had everything sorted out, but it doesn't copy anything. My output is zero files copied for every iteration. Original Code using xcopy: for /r %%a in (*.bmp *.dds *.gif *.jpg *.jpeg *.png *.psd *.pspimage *.tga *.thm *.tif *.tiff) do ( echo f | xcopy "%%a" "%HOMEDRIVE%%HOMEPATH%\Desktop\LDR\Images\Bitmap\%%~nxa" /q /y /g /c ) Revised (broken) Code using copy: for /r %%a in (*.bmp *.dds *.gif *.jpg *.jpeg *.png *.psd *.pspimage *.tga *.thm *.tif *.tiff) do ( copy "%%a" "%HOMEDRIVE%%HOMEPATH%\Desktop\LDR\Images\Bitmap\%%~nxa" /d /y /z ) Output: The system cannot find the path specified. 0 files copied. I know that it seems everyone uses either xcopy or robocopy but can anyone help with copy? Note: I'm using Batch to keep it very lightweight and command-line accessible.

  Read the article

• Very slow write performance on Debian 6.0 (AMD64) with DMCRYPT/LVM/RAID1

  - by jdelic

  I'm seeing very strange performance characteristics on one of my servers. This server is running a simple two-disk software-RAID1 setup with LVM spanning /dev/md0. One of the logical volumes /dev/vg0/secure is encrypted using dmcrypt with LUKS and mounted with the sync and noatimes flag. Writing to that volume is incredibly slow at 1.8 MB/s and the CPU usage stays near 0%. There are 8 crpyto/1-8 processes running (it's a Intel Quadcore CPU). I hope that someone on serverfault has seen this before :-(. uname -a 2.6.32-5-xen-amd64 #1 SMP Tue Mar 8 00:01:30 UTC 2011 x86_64 GNU/Linux Interestingly, when I read from the device I get good performance numbers: reading without encryption: $ dd if=/dev/vg0/secure of=/dev/null bs=64k count=100000 100000+0 records in 100000+0 records out 6553600000 bytes (6.6 GB) copied, 68.8951 s, 95.1 MB/s reading with encryption: $ dd if=/dev/mapper/secure of=/dev/null bs=64k count=100000 100000+0 records in 100000+0 records out 6553600000 bytes (6.6 GB) copied, 69.7116 s, 94.0 MB/s However, when I try to write to the device: $ dd if=/dev/zero of=./test bs=64k 8809+0 records in 8809+0 records out 577306624 bytes (577 MB) copied, 321.861 s, 1.8 MB/s Also, when I read I see CPU usage, when I write, the CPU stays at almost 0% usage. Here is output of cryptsetup luksDump: LUKS header information for /dev/vg0/secure Version: 1 Cipher name: aes Cipher mode: cbc-essiv:sha256 Hash spec: sha1 Payload offset: 2056 MK bits: 256 MK digest: dd 62 b9 a5 bf 6c ec 23 36 22 92 4c 39 f8 d6 5d c1 3a b7 37 MK salt: cc 2e b3 d9 fb e3 86 a1 bb ab eb 9d 65 df b3 dd d9 6b f4 49 de 8f 85 7d 3b 1c 90 83 5d b2 87 e2 MK iterations: 44500 UUID: a7c9af61-d9f0-4d3f-b422-dddf16250c33 Key Slot 0: ENABLED Iterations: 178282 Salt: 60 24 cb be 5c 51 9f b4 85 64 3d f8 07 22 54 d4 1a 5f 4c bc 4b 82 76 48 d8 a2 d2 6a ee 13 d7 5d Key material offset: 8 AF stripes: 4000 Key Slot 1: DISABLED Key Slot 2: DISABLED Key Slot 3: DISABLED Key Slot 4: DISABLED Key Slot 5: DISABLED Key Slot 6: DISABLED Key Slot 7: DISABLED

  Read the article

• Block protect (Keep last line of paragraph with next paragraph)

  - by Ed Cottrell

  Is there a way to force Microsoft Word 2010 to keep the last line of a paragraph with the next paragraph? An example of when this is relevant is when starting a block quote; it doesn't look good to have the block quote start at the top of a new page, particularly when it's introduced by a partial sentence, like this: "Lorem ipsum" is sample text widely used in the publishing industry, as the text has spacing roughly similar to that of English and therefore looks "normal" but unintelligible to an English reader's eye, allowing the reader to focus on design elements. It begins, Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam rhoncus laoreet risus, quis congue leo viverra congue. Suspendisse magna massa, viverra imperdiet est eu, ultrices volutpat lectus. Sed pulvinar est id risus lobortis venenatis. There shouldn't be a page break after "begins," because it looks like the sentence ends abruptly. "Keep lines together" won't work, because by definition we're talking about two paragraphs. "Keep with next" won't work if the first paragraph is larger than a couple of lines, because then you get an awkwardly large space at the bottom of a page. Manual line breaks obviously work, but only when the document is final, which is often less certain than it seems. I know WordPerfect has a feature called "block protect" that does this, but I have not found even an acceptable substitute in Word. I have played with style separators and hidden paragraph breaks, but to no avail. I would love a special character, kind of like the nonbreaking space or zero width optional space, that tells Word to move to the next page if the next paragraph would otherwise start the page. A macro would also be great, but I haven't been able to find a starting point (like how to detect where non-manual page breaks fall). Edit: It looks like "Keep with next" works this way in Word 2013, but I specifically need a fix that works in Word 2010.

  Read the article

• SORT empties my file?

  - by Jonathan Sampson

  I'm attempting to sort a csv on my machine, but I seem to be erasing the contents each time I use the sort command. I've basically created a copy of my csv lacking the first row: sed '1d' original.csv > newcopy.csv To confirm that my new copy exists lacking the first row I can check with head: head 1 newcopy.csv Sure enough, it finds my file and shows me the original second now (now first row). My csv consists of numerous values seperated by commas: Jonathan Sampson,,,,[email protected],,,GA,United States,, Jane Doe,Mrs,,,[email protected],,,FL,United States,32501, As indicated above, some fields are empty. I want to sort based upon the email address field, which is either 4, or 5 - depending on whether the sort command uses a zero-based index. So I'm trying the following: sort -t, +4 -5 newcopy.csv > newcopy.csv So I'm using -t, to indicate that my fields are terminated by the comma, rather than a space. I'm not sure if +4 -5 actually sorts on the email field or not - I could use some help here. And then newcopy.csv > newcopy.csv to overwrite the original file with new sort results. After I do this, if I try to read in the first line: head 1 newcopy.csv I get the following error: head: cannot open `1' for reading: No such file or directory == newcopy.csv <== Sure enough, if I check my directory the file is now empty, and 0 bytes.

  Read the article

• EEE PC dropbox server running 24/7

  - by microspino

  I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have Samsung SCX 4521F (fax/print/scan/copy), Samsung ML2010, HP Laser jet P1006, HP Color Laserjet CP1215, HP Office jet pro K8600, HP Design jet 500. All of them now are connected using little print servers and I want to get rid of them hooking everything to this mini server. The fax/print/scan/copy machine need to stay connected to a PC to make me able to use the software that comes with It. The mini server would save me on this too. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: If You have something similar running for a long time If You disagree with this hardware choice and If You would suggest some other device. If You see any issues with my printing setup Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

  Read the article

• Disk IO slow on ESXi, even slower on a VM (freeNAS + iSCSI)

  - by varesa

  I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas 8.0.4). Those two machines are connected to each other with Gigabit ethernet. The raid-z volume is divided into three parts: two zvols, shared with iscsi, and one directly on top of zfs, shared with nfs and similar. I ssh'd into the freeNAS box, and did some testing on the disks. I used ddto test the third part of the disks (straight on top of ZFS). I copied a 4GB (2x the amount of RAM) block from /dev/zero to the disk, and the speed was 80MB/s. Other of the iSCSI shared zvols is a datastore for the ESXi. I did similar test with time dd .. there. Since the dd there did not give the speed, I divided the amount of data transfered by the time show by time. The result was around 30-40 MB/s. Thats about half of the speed from the freeNAS host! Then I tested the IO on a VM running on the same ESXi host. The VM was a light CentOS 6.0 machine, which was not really doing anything else at that time. There were no other VMs running on the server at the time, and the other two "parts" of the disk array were not used. A similar dd test gave me result of about 15-20 MB/s. That is again about half of the result on a lower level! Of course the is some overhead in raid-z - zfs - zvolume - iSCSI - VMFS - VM, but I don't expect it to be that big. I belive there must be something wrong in my system. I have heard about bad performance of freeNAS's iSCSI, is that it? I have not managed to get any other "big" SAN OS to run on the box (NexentaSTOR, openfiler). Can you see any obvious problems with my setup?

  Read the article

• VoIP setup for one external PSTN line

  - by Jcl

  I'm completely new to VoIP and the likes, and I'm trying to find information about what could be the best setup for this. I need 4 (maybe more in the future, but maximum 5 or 6) wireless extensions, connected to 1 PSTN line, and maybe 2 in the future. I've been trying to gather information about the gear needed but everything I find seems too much over-the-top (and extremely expensive). The main problem is that the physical place we are on doesn't have possibilities of having a decent internet connection, so using a external VoIP "virtual PBX" is not an option. Thing is, even if small, phone is critical to this organization. I currently have an analog DECT/GAP PBX which does what I need, however the PBX is very bad and the call quality is horrible, and that's why I want to change it. The requirements would be: 4 wireless terminals (routing cable is not an option), all of them ringing on incoming PSTN calls. Ability to do internal calls (4 separate offices) and ability to pass calls between terminals. The 4 terminals should be able to access the external PSTN line without dialing any special codes. Very important: terminals should be able to issue commands on the PSTN line to the external operator in the form *nn*nnnnnnnn# . Don't know wether this could face to be a problem, but I've had problems with analog PBX which would take any * as a PBX command and wouldn't allow terminals to send it to the external lines. Not so important, but would be nice to have: call waiting music Could anyone recommend such a setup? I need to be able to do this on a EXTREMELY LIMITED budget (that is: I don't have a limit, but all should get as much to zero as possible). I have enough spare powerful computers and a 300mbps wireless network which works just fine, so that's not to include in the budget. Don't really know if this is the best place to ask, but it's the most StackExchange-related site I've found to this subject.

  Read the article

• copying an lvm partition to a smaller disk, and renaming volume groups.

  - by dlamblin

  I was trying to shrink a vmdk (VMWare disk image) file to be as small as possible, and found two recommendations. The first is to cat /dev/zero into the fs then delete it, and run VMWare tools' shrink. This works okay. The second is to copy everything into a new vmdk. I went the second route. I did not use dd because I actaully want to use as few blocks as possible, instead of having a block-by-clok copy. Any unlinked files will still have blocks that aren't zeroed out. Secondly the centos image was mostly lvm, except for the boot partition, and my target was going to be 4gb instead of 8gb. I did use dd for the first 40mb to get the boot blocks and partition copied. I then used parted to create an identical primary boot, and smaller primary lvm. Then I used pvcreate on that device sdb2, vgcreate, and lvcreate to create a root and swap. I used mkfs.ext3fs on the root partition and then rsync -av / /2root excluding /proc /sys /2root /dev. So far everything went fine. My problem is that: The result is 2.7 GB while the source was 2.1 GB. This is weird to me. The second vgroup is called VolGroup01, while the original was called VolGroup00. How can I rename the VolGroup01 to VolGroup00 and swap it out after all this?

  Read the article

• Bad sectors, S.M.A.R.T., SpinRite, firmware on platter and drive id questions.

  - by Christopher Galpin

  Is it possible for S.M.A.R.T. to give false readings (say I was fiddling with lots of recovery programs, transfers, so on and so forth) or is it absolutely a read-only direct correlation to the physical status of a drive? Does SpinRite level 5 "recover bad sectors" operate on those marked at the factory? Are they on the same level as your generic bad sector, with SpinRite thus having full access? (Also I'm curious if SMART's bad sector count is zero'd afterward or if it includes factory marked sectors.) The main firmware of some drives, like a WD Passport is stored on the platter. How is it protected? Is it through marking them as bad sectors? If so, I'm wondering if SpinRite's sector recovery could bring about firmware corruption on these drives. Is the failure of a drive to report valid identity information (hdparm -I /dev/xx) consistent with corrupted firmware, or just general disk failure? I may be misunderstanding the role of firmware here. I feel I've read a drive's identity information is on the platter, just like the partition tables and so on. Is this true? (Apologizes if this is more appropriate for SuperUser.)

  Read the article

• Is it possible to use rsync over sftp (without an ssh shell)?

  - by Tom Feiner

  Rsync over ssh, works great every time. However, trying to rsync to a host which allows only sftp logins, but not ssh logins, provides the following error: rsync -av /source ssh user@remotehost:/target/ protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(171) [sender=3.0.6] Here's the relevant section from the rsync man page: This message is usually caused by your startup scripts or remote shell facility producing unwanted garbage on the stream that rsync is using for its transport. The way to diagnose this problem is to run your remote shell like this: ssh remotehost /bin/true > out.dat then look at out.dat. If everything is working correctly then out.dat should be a zero length file. If you are getting the above error from rsync then you will probably find that out.dat contains some text or data. Look at the contents and try to work out what is producing it. The most com- mon cause is incorrectly configured shell startup scripts (such as .cshrc or .profile) that contain output statements for non-interactive logins. Trying this on my system produced the following in out.dat: ssh-dummy-shell: Command not allowed. As I thought, the host is not allowing ssh logins. The following link shows that it is possible to accomplish this task using fuse with sshfs - however it is extremely slow, and not fit for production use. Is there any chance of getting rsync sftp to work?

  Read the article

• undelete big files - mission impossible?

  - by johnrembo

  Hi, I've accidentaly deleted outlook.pst (6.7GB) file, while there was only 400MB free space left on primary NTFS partition (winxp). I've tried several recovery tools to get this file back. "Ontrack Easy Recovery Pro" found 0 pst files (complete scan mode), while "Recover My Files" in sector scan mode found 5 pst's, but 4 of them of sizes from 3 to 28 KB, while the 5th one - 1Gb. I've managed to succesfuly recover 1Gb pst file, which was 1 year old copy (the one used after the latest windows reinstall). Now, I'm frustrated and confused Why 1 year old file was succesfuly recovered if there were only 400MB left on primary partition? Where's 6.7GB file gone? I did some reading (i.e. here), and it seems that there's almost no probability to retrieve the file I'm looking for, but wait - none of recovery tools i've used found zero-sized pst file, moreover - if due to fragmentation a file might be corrupted - we could use scanpst.exe to fix some errors and survive with 10 or 100 emails missing - whatever. Could you please recommend some more sophisticated recovery tools for this particular task? Appretiate your help - thanks in advance

  Read the article

• Virus / Malware: Explorer window with strange user logged into Hotmail

  - by abel

  I was looking into a PC, the user of which had complained that he couldn't connect to the internet and that the PC was experiencing random restarts. The PC runs WinXP SP3. On examination, I found that the Wireless Zero Configuration service was stopped. I enabled that and the internet was back on(The pc connected through wifi). Then I started firefox and browsed to gmail.com. I did not launch any other program, except for a few explorer windows. It was then I noticed a window had popped up(it was not a pop up). It had the explorer folder icon and instead of explorer folder contents, it showed a hotmail page, with a user named "Homer Stinson" logged in. The titlebar was empty and there were no toolbars. I asked the client whether this was his email id, which he said it was not. I opened task manager, which did not show this explorer window in it's Application tab. I switched back to the 'rogue' window and found that the hotmail settings page was now open, which later changed to the hotmail edit profile page for the same user. I was not clicking anything. Then suddenly the window closed. I checked the autorun locations, fired up a Malwarebytes Anti Malware scan which gave a clean result. The system also had an updated installation of AVG. I don't want a solution for this virus(?) problem. I asked this here because I wanted to know if somebody has come across something similar. What kind of malware can this be? The user had not seen a similar window before and I should have taken screenshots. (PS:Homer Stinson is an imaginary name. I searched for the other real name with some relevant keywords but could not come up with a virus/malware discussion post.) UPDATE: When I checked the PC later a DEP error had popped up closing which restarted the PC.

  Read the article

• Installing Trac on Windows under Apache 2.2?

  - by Warren P

  Trac is a python-powered bug-tracking and project-management app. According to Trac's wiki, there are several options for installing Trac, a standalone server (tracd), or under a dedicated webserver using one of these options: FastCGI - Not available on windows. mod_wsgi - No version of mod_wsgi available for Apache 2.2.22 and Python 2.7.3-amd64 that actually runs on my system! mod_python - no longer recommended, as mod_python is not actively maintained anymore) CGI -should not be used, as the performance is far from optimal) That leaves me with zero ways to run Trac on Windows. Apache 2.2.22 with ModWSGI loading, crashes the Apache2.2 service on startup without any error logs. Disabling the line in the apache configuration to load mod_wsgi restores sanity. I just want an installation of Trac on windows with Authentication enabled. I am unable to get authenetication to work using basic tracd like this: tracd -p 8000 --basic-auth="c:\tmp,c:\tmp\Passwords.md5.txt,mycompany" c:\tmp\RootFolder And I am unable to get Mod_WSGI installed. I'm going to keep trying to figure out a combination that works, I suspect I should have installed 32 bit python instead of 64 bit python, to start with. Did I do wrong to install Python 64 bit 2.7.3? I tried again with all 32 bit components, and still can't get MOD_WSGI to work with apache 2.2.22. I'm going to try to compile mod_wsgi myself with Visual C++ Express 2010, but it seems to me that it ought to be easier than this to get Trac running on windows, with authentication. Is there a way to run Trac on Windows, under Apache, with authentication? The last "Trac on windows" article died in 2008, leaving only this internet archive link for "Trac on windows" setup.

  Read the article

• Trouble with IIS SMTP relaying to Gmail

  - by saille

  I appreciate that similar questions have been asked about how to setup SMTP relaying with IIS's virtual SMTP server. However I'm still completely stumped on this problem. Here's the setup: IIS 6.0 SMTP server running on Win2k3 box with a NAT'ed IP. Company uses Gmail for all email services. An app on the box needs to send email, so normally we'd just set the app up to talk to smtp.gmail.com directly, but this app doesn't support TLS. Easy, we just setup a local SMTP relay right? So I thought. What we have done so far: Setup IIS SMTP server to relay to smtp.gmail.com, as per these excellent instructions: http://fmuntean.wordpress.com/2008/10/26/how-to-configure-iis-smtp-server-to-forward-emails-using-a-gmail-account/ The local SMTP relay allows anonymous access. Both the local IP and the loopback IP have been explicitly allowed in the Connection and Relay dialogs. Tried sending email from 2 different apps via the local SMTP server, but failed (the emails end up in the Queue folder, but never get sent). The IIS logs show the conversation with the local app, but zero conversation happening with smtp.gmail.com. The port used by gmail is open outbound, and indeed the apps we have that support TLS can send email directly via smtp.gmail.com, so there is no problem with the network. At this point I changed the smtp settings in IIS SMTP server to use a different external SMTP server and hey-presto, the local apps can send email via local IIS SMTP relay. So smtp.gmail.com fails to work with our IIS SMTP relay, but another 3rd party SMTP service works fine. We need to use smtp.gmail.com, so how to troubleshoot this one?

  Read the article

• dd oflag=direct 5x fast

  - by César

  I have Centos 6.2 in server with this specs: 2xCPU 16 Core AMD Opteron 6282 SE 64GB RAM Raid controller H700 1GB cache NV - 2HD 74GB SAS 15Krpm RAID1 stripe 16k (OS Centos 6.2) sda - 4HD 146GB SAS 15Krpm RAID10 stripe 16k (ext4 bs 4096, no barriers) sdb -> /vol01 Raid controller H800 1GB cache nv - MD1200 12HD 300GB SAS 15Krpm RAID10 stripe 256k (For DB Postgres 8.3.18) (ext4 bs 4096, stride 64, stripe-width 384, no barriers) sdc -> /vol02 I'm benchmarking IO speed with dd, and view thah if in RAID10 12 disk exec: dd if=/dev/zero of=DD bs=8M count=10000 oflag=direct 10000+0 records in 10000+0 records out 83886080000 bytes (84 GB) copied, 126,03 s, 666 MB/s but if I remove "oflag=direct" option obtain about 80 MB/s. In read benchmark, results are similar: dd of=/dev/null if=DD bs=8M count=10000 iflag=direct 10000+0 records in 10000+0 records out 83886080000 bytes (84 GB) copied, 79,5918 s, 1,1 GB/s If remove iflag=direct obtain 150MB/s... I don't understand this huge differences, on other machines y don't have this behavior. Can I have some kernel parameter misconfigured? Thanks!

  Read the article

• Surprising corruption and never-ending fsck after resizing a filesystem.

  - by Steve Kemp

  System in question has Debian Lenny installed, running a 2.65.27.38 kernel. System has 16Gb memory, and 8x1Tb drives running behind a 3Ware RAID card. The storage is managed via LVM. Short version: Running a KVM guest which had 1.7Tb storage allocated to it. The guest was reaching a full-disk. So we decided to resize the disk that it was running upon We're pretty familiar with LVM, and KVM, so we figured this would be a painless operation: Stop the KVM guest. Extend the size of the LVM partition: "lvextend -L+500Gb ..." Check the filesystem : "e2fsck -f /dev/mapper/..." Resize the filesystem: "resize2fs /dev/mapper/" Start the guest. The guest booted successfully, and running "df" showed the extra space, however a short time later the system decided to remount the filesystem read-only, without any explicit indication of error. Being paranoid we shut the guest down and ran the filesystem check again, given the new size of the filesystem we expected this to take a while, however it has now been running for 24 hours and there is no indication of how long it will take. Using strace I can see the fsck is "doing stuff", similarly running "vmstat 1" I can see that there are a lot of block input/output operations occurring. So now my question is threefold: Has anybody come across a similar situation? Generally we've done this kind of resize in the past with zero issues. What is the most likely cause? (3Ware card shows the RAID arrays of the backing stores as being A-OK, the host system hasn't rebooted and nothing in dmesg looks important/unusual) Ignoring brtfs + ext3 (not mature enough to trust) should we make our larger partitions in a different filesystem in the future to avoid either this corruption (whatever the cause) or reduce the fsck time? xfs seems like the obvious candidate?

  Read the article

• Dos/ Flood Lag even though Port not Saturated

  - by Asad Moeen

  My GameServers had been under some UDP Floods due to which they generated outputs to the attacker which gave the GameServers some huge lags. Thanks to friends at ServerFault that upon different kind of testing, I was able to successfully block the attack. My question is actually something else but it is important to know how the GameServers reacted to the attack and if the machine kept stable or not: 300kb/s Input would cause GameServer to generate 2mb/s Output. So as the Input Rate kept increasing, output rate would reach so high that it would no longer be possible for the GameServer to control it and hence it would give a huge Lag until the attack is stopped. Usually the game server starts to lag when it sends out something greater than 5mb/s and under that is controllable. Theoretically, I was able to receive a 60mb/s output from my GameServer on inputting 10mb/s. Its just the way the GameServer works if not protected. Now on some of my machines, only the GameServer under attack lagged and although the server was generating 60mb/s output, rest of the gameservers on other ports would run fine without lags on the same machine. But there was another machine which also runs on a 100 MBPS Network port, even 1 mbps input ( and ZERO output because attack is blocked ) even on an unused port would give a constant yellow line ( on the Lag-o-Meter ) to all the clients on all GameServers indicating lag because that line is actually blue under normal conditions. It would remain the same even on 50mbps or 900mbps input. I tried contacting the host about it because I believe its the way their Network is bridged, but they can't help me about it. Anyone else knowing about such issues because if 900mbps input does not Saturate the port, how can 1mbps input lag the servers although port is not saturated and enough bandwidth is available?

  Read the article

• How do hdparm's -S and -B options interact?

  - by user697683

  These two options seem confusing. For example: according to the man page -B 254 "does not permit spin-down". However, testing with -B 254 -S 1 the drive does spin down after 5 seconds. -B Query/set Advanced Power Management feature, if the drive supports it. A low value means aggressive power management and a high value means better performance. Possible settings range from values 1 through 127 (which permit spin-down), and values 128 through 254 (which do not permit spin-down). The highest degree of power management is attained with a setting of 1, and the highest I/O performance with a setting of 254. A value of 255 tells hdparm to disable Advanced Power Management altogether on the drive (not all drives support disabling it, but most do). -S Put the drive into idle (low-power) mode, and also set the standby (spindown) timeout for the drive. This timeout value is used by the drive to determine how long to wait (with no disk activity) before turning off the spindle motor to save power. Under such circumstances, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 and 12 hours, and the value 254 is reserved. 255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.

  Read the article

• SQL Full-Text indexing not populating

  - by Sam

  We installed a clustered SQL 2005 installation on windows 2008 and reattached our san drives from another machine and restored to do a migration to new hardware. There have been a few minor issues, but this one has me stuck. Trying to populate Full-Text indexes is not working. I create a basic table with some simple text in a new database and get the same results as old indexes. 2010-09-27 10:30:46.85 spid19s Informational: Full-text Full population initialized for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'). Population sub-tasks: 1. 2010-09-27 10:31:15.36 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001DF. Attempt will be made to reindex it. 2010-09-27 10:31:15.37 spid19s The component 'MSFTE.DLL' reported error while indexing. Component path 'D:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\MSFTE.DLL'. 2010-09-27 10:31:15.37 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001E0. Attempt will be made to reindex it. The rebuild/repopulate procedure finishes, but I get zero rows in the index. The .dll in the message is present and the service accounts have access to this. My FTData also has data in it, so it seems there wouldn't be permission issue on this folder. Application throws this error: “PHP Warning: mssql_query() [function.mssql-query]: message: Full-text catalog 'ikm_PageIndex_FText' is in an unusable state. Drop and re-create this full-text catalog. (severity 16) in E:\Inetpub\knowledgebase_insidemesa\lib\database\mssql.php on line 154” A microsoft discussion is the only post I found which had claimed to fix this - said it was registry related, but then didn't post the fix.

  Read the article

• How to choose the most optimal RAID settings on PE2950

  - by javano

  I have some Dell PowerEdge 2950's with 4x 15k, 150GB Cheetah SAS drives in them. They are going to be VM hosts, CentOS running ESXi with Windows Server 2k8 guests. Some guests will be hosting IIS servers, and others MSSQL servers. I am trying to set the RAID virtual disks settings and can't decide which is more optimal given this situation; Read Policy: Out of Read-Ahead, No-Read-Ahead and Adaptive Read-Ahead, the default is Read-Ahead. I will be making large sequential writes initially, writing out blank images for virtual machine hard drives (lets say 30GBs from /dev/zero for example) so Read-Ahead seems good at first. But within the virtual machines reads could be random from anywhere within their file systems as they are IIS and MSSQL servers, so perhaps No-Read-Ahead is a better idea? Now I think Adaptive Read-Ahead would be better then as a compromise but I don't know much about this option, how does it compare in performance to the others? Write Policy: write-back caching, write-through caching, the default is write-back caching. The default of write-back caching is safer than write-through caching but at a performance expense. My thinking here is that in the event of power loss for example, it seems more likely in my head (this is why I need some clarification!) that damage will occur to a guest VM with write-back caching enabled, so I should favour write-through? I have searched around and there is obviously no definitive answer, so I would like to find out what is best for my situation.

  Read the article

• Processing-time billing in Amazon EC2

  - by Rafael Almeida

  Hi all! I think my question is fairly basic, but I would like a clarification: in the Pricing part of AWS we can see that Amazon charges people around .10 by the 'instance computing hour'. I've seen in a blog post somewhere (can't remember where exactly, and even if I did I think it was in Portuguese anyway) that this way your minimum monthly payment would be $72 (= .10 $s/hour x 24 hours x 30 days). Is this correct? (I don't think it is!) In my understanding is that this 'virtual computing time' is only used when your machine is actually doing something (serving pages, serving the admin via ssh, whatever), so real billable usage would be less than 720 hours/month in most webserver scenarios. Is my view correct? If it is, then it leads me to another question: is it economically interesting to buy access to one of these instances for testing? I mean, would I have the 'freedom' to 'forget' about it for a month and receive a very-close-to-zero (as in, a few cents) bill? Do you do it/know of anybody who does? Any thoughts on the matter (as in, "yes, it's a good idea", or "yes, but there's this 'gotcha': ...", or "no, nobody does it because of...")? PS: sorry for the loong question text. I highlighted the main questions for easy view. Also, I'm not sure if this question is actually more than one and if it's desirable for the community, so, sorry if it is too! Thanks in advance!

  Read the article

• Loss of network connectivity when playing video on Optoma HD180 projector

  - by Jeff Fohl

  Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas?

  Read the article

• When I restart my LXC environment, the container does not re-bind to the IP address

  - by RoboTamer

  The IP does no longer respond to a remote ping With restart I mean: lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d -- /etc/network/interfaces auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo # device: eth0 auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.22.189.58 netmask 255.255.255.248 gateway 192.22.189.57 broadcast 192.22.189.63 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off post-up ip route add 192.22.189.59 dev br0 post-up ip route add 192.22.189.60 dev br0 post-up ip route add 192.22.189.61 dev br0 post-up ip route add 192.22.189.62 dev br0 -- /etc/lxc/vm3.conf lxc.utsname = vm3 lxc.rootfs = /var/lib/lxc/vm3/rootfs lxc.tty = 4 #lxc.pts = 1024 # pseudo tty instance for strict isolation lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.mtu = 1500 #lxc.cgroup.cpuset.cpus = 0 # security parameter lxc.cgroup.devices.deny = a # Deny all access to devices lxc.cgroup.devices.allow = c 1:3 rwm # dev/null lxc.cgroup.devices.allow = c 1:5 rwm # dev/zero lxc.cgroup.devices.allow = c 5:1 rwm # dev/console lxc.cgroup.devices.allow = c 5:0 rwm # dev/tty lxc.cgroup.devices.allow = c 4:0 rwm # dev/tty0 lxc.cgroup.devices.allow = c 4:1 rwm # dev/tty1 lxc.cgroup.devices.allow = c 4:2 rwm # dev/tty2 lxc.cgroup.devices.allow = c 1:9 rwm # dev/urandon lxc.cgroup.devices.allow = c 1:8 rwm # dev/random lxc.cgroup.devices.allow = c 136:* rwm # dev/pts/* lxc.cgroup.devices.allow = c 5:2 rwm # dev/pts/ptmx lxc.cgroup.devices.allow = c 254:0 rwm # rtc # mounts point lxc.mount.entry=proc /var/lib/lxc/vm3/rootfs/proc proc nodev,noexec,nosuid 0 0 lxc.mount.entry=devpts /var/lib/lxc/vm3/rootfs/dev/pts devpts defaults 0 0 lxc.mount.entry=sysfs /var/lib/lxc/vm3/rootfs/sys sysfs defaults 0 0

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >