Search Results

Search found 22982 results on 920 pages for 'users'.

Page 868/920 | < Previous Page | 864 865 866 867 868 869 870 871 872 873 874 875  | Next Page >

  • debugging JBoss 100% CPU usage

    - by NateS
    Originally posted on Server Fault, where it was suggested this question might better asked here. We are using JBoss to run two of our WARs. One is our web app, the other is our web service. The web app accesses a database on another machine and makes requests to the web service. The web service makes JMS requests to other machines, aggregates the data, and returns it. At our biggest client, about once a month the JBoss Java process takes 100% of all CPUs. The machine running JBoss has 8 CPUs. Our web app is still accessible during this time, however pages take about 3 minutes to load. Restarting JBoss restores everything to normal. The database machine and all the other machines are fine, only the machine running JBoss is affected. Memory usage is normal. Network utilization is normal. There are no suspect error messages in the JBoss logs. I have set up a test environment as close as possible to the client's production environment and I've done load testing with as much as 2x the number of concurrent users. I have not gotten my test environment to replicate the problem. Where do we go from here? How can we narrow down the problem? Currently the only plan we have is to wait until the problem occurs in production on its own, then do some debugging to determine the cause. So far people have just restarted JBoss when the problem occurred to minimize down time. Next time it happens they will get a developer to take a look. The question is, next time it happens, what can be done to determine the cause? We could setup a separate JBoss instance on the same box and install the web app separately from the web service. This way when the problem next occurs we will know which WAR has the problem (assuming it is our code). This doesn't narrow it down much though. Should I enable JMX remote? This way the next time the problem occurs I can connect with VisualVM and see which threads are taking the CPU and what the hell they are doing. However, is there a significant down side to enabling JMX remote in a production environment? Is there another way to see what threads are eating the CPU and to get a stacktrace to see what they are doing? Any other ideas? Thanks!

    Read the article

  • Switching DataSources in ReportViewer in WinForms

    - by Mike Wills
    I have created a winform for the users to view view the many reports I am creating for them. I have a drop down list with the report name which triggers the appropriate fields to display the parameters. Once those are filled, they press Submit and the report appears. This works the first time they hit the screen. They can change the parameters and the ReportViewer works fine. Change to a different report, and the I get the following ReportViewer error: An error occurred during local report processing. An error has occurred during the report processing. A data source instance has not been supplied for the data source "CgTempData_BusMaintenance". As far as the process I use: I set reportName (string) the physical RDLC name. I set the dataSource (string) as the DataSource Name I fill a generic DataTable with the data for the report to run from. Make the ReportViewer visible Set the LocalReport.ReportPath = "Reports\\" = reportName; Clear the LocalReport.DataSources.Clear() Add the new LocalReport.DataSources.Add(new ReportDataSource(dataSource, dt)); RefreshReport() on the ReportViewer. Here is the portion of the code that setups up and displays the ReportViewer: /// <summary> /// Builds the report. /// </summary> private void BuildReport() { DataTable dt = null; ReportingCG rcg = new ReportingCG(); if (reportName == "GasUsedReport.rdlc") { dataSource = "CgTempData_FuelLog"; CgTempData.FuelLogDataTable DtFuelLog = rcg.BuildFuelUsedTable(fromDate, toDate); dt = DtFuelLog; } else if (reportName == "InventoryCost.rdlc") { CgTempData.InventoryUsedDataTable DtInventory; dataSource = "CgTempData_InventoryUsed"; DtInventory = rcg.BuildInventoryUsedTable(fromDate, toDate); dt = DtInventory; } else if (reportName == "VehicleMasterList.rdlc") { dataSource = "CgTempData_VehicleMaster"; CgTempData.VehicleMasterDataTable DtVehicleMaster = rcg.BuildVehicleMasterTable(); dt = DtVehicleMaster; } else if (reportName == "BusCosts.rdlc") { dataSource = "CgTempData_BusMaintenance"; dt = rcg.BuildBusCostsTable(fromDate, toDate); } // Setup the DataSource this.reportViewer1.Visible = true; this.reportViewer1.LocalReport.ReportPath = "Reports\\" + reportName; this.reportViewer1.LocalReport.DataSources.Clear(); this.reportViewer1.LocalReport.DataSources.Add(new ReportDataSource(dataSource, dt)); this.reportViewer1.RefreshReport(); } Any ideas how to remove all of the old remaining data? Do I dispose the object and recreate it?

    Read the article

  • Template inheritence c++

    - by Chris Condy
    I have made a template singleton class, I have also made a data structure that is templated. My question is; how do I make my templated data structure inherit from a singleton so you can only have one float type of this structure? I have tested both seperate and have found no problems. Code provided under... (That is the problem) template <class Type> class AbstractRManagers : public Singleton<AbstractRManagers<Type> > The problem is the code above doesn't work I get alot of errors. I cant get it to no matter what I do template a templated singleton class... I was asking for maybe advice or maybe if the code above is incorrect guidence? #ifndef SINGLETON_H #define SINGLETON_H template <class Type> class Singleton { public: virtual ~Singleton(); Singleton(); static Type* m_instance; }; template <class Type> Type* Singleton<Type>::m_instance = 0; #include "Singleton.cpp" #endif #ifndef SINGLETON_CPP #define SINGLETON_CPP #include "Singleton.h" template <class Type> Singleton<Type>::Singleton() { } template <class Type> Singleton<Type>::~Singleton() { } template <class Type> Type* Singleton<Type>::getInstance() { if(m_instance==nullptr) { m_instance = new Type; } return m_instance; } #endif #ifndef ABSTRACTRMANAGERS_H #define ABSTRACTRMANAGERS_H #include <vector> #include <map> #include <stack> #include "Singleton.h" template <class Type> class AbstractRManagers : public Singleton<AbstractRManagers<Type> > { public: virtual ~AbstractRManagers(); int insert(Type* type, std::string name); Type* remove(int i); Type* remove(std::string name); Type* get(int i); Type* getS(std::string name); int get(std::string name); int get(Type* i); bool check(std::string name); int resourceSize(); protected: private: std::vector<Type*> m_resources; std::map<std::string,int> m_map; std::stack<int> m_freePos; }; #include "AbstractRManagers.cpp" #endif #ifndef ABSTRACTRMANAGERS_CPP #define ABSTRACTRMANAGERS_CPP #include "AbstractRManagers.h" template <class Type> int AbstractRManagers<Type>::insert(Type* type, std::string name) { int i=0; if(!check(name)) { if(m_freePos.empty()) { m_resources.push_back(type); i = m_resources.size()-1; m_map[name] = i; } else { i = m_freePos.top(); m_freePos.pop(); m_resources[i] = type; m_map[name] = i; } } else i = -1; return i; } template <class Type> int AbstractRManagers<Type>::resourceSize() { return m_resources.size(); } template <class Type> bool AbstractRManagers<Type>::check(std::string name) { std::map<std::string,int>::iterator it; it = m_map.find(name); if(it==m_map.end()) return false; return true; } template <class Type> Type* AbstractRManagers<Type>::remove(std::string name) { Type* temp = m_resources[m_map[name]]; if(temp!=NULL) { std::map<std::string,int>::iterator it; it = m_map[name]; m_resources[m_map[name]] = NULL; m_freePos.push(m_map[name]); delete (*it).second; delete (*it).first; return temp; } return NULL; } template <class Type> Type* AbstractRManagers<Type>::remove(int i) { if((i < m_resources.size())&&(i > 0)) { Type* temp = m_resources[i]; m_resources[i] = NULL; m_freePos.push(i); std::map<std::string,int>::iterator it; for(it=m_map.begin();it!=m_map.end();it++) { if((*it).second == i) { delete (*it).second; delete (*it).first; return temp; } } return temp; } return NULL; } template <class Type> int AbstractRManagers<Type>::get(Type* i) { for(int i2=0;i2<m_resources.size();i2++) { if(i == m_resources[i2]) { return i2; } } return -1; } template <class Type> Type* AbstractRManagers<Type>::get(int i) { if((i < m_resources.size())&&(i >= 0)) { return m_resources[i]; } return NULL; } template <class Type> Type* AbstractRManagers<Type>::getS(std::string name) { return m_resources[m_map[name]]; } template <class Type> int AbstractRManagers<Type>::get(std::string name) { return m_map[name]; } template <class Type> AbstractRManagers<Type>::~AbstractRManagers() { } #endif #include "AbstractRManagers.h" struct b { float x; }; int main() { b* a = new b(); AbstractRManagers<b>::getInstance()->insert(a,"a"); return 0; } This program produces next errors when compiled : 1> main.cpp 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::stack<_Ty,_Container> &,const std::stack<_Ty,_Container> &)' : could not deduce template argument for 'const std::stack<_Ty,_Container> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\stack(166) : see declaration of 'std::operator <' 1> c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(124) : while compiling class template member function 'bool std::less<_Ty>::operator ()(const _Ty &,const _Ty &) const' 1> with 1> [ 1> _Ty=std::string 1> ] 1> c:\program files\microsoft visual studio 10.0\vc\include\map(71) : see reference to class template instantiation 'std::less<_Ty>' being compiled 1> with 1> [ 1> _Ty=std::string 1> ] 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(451) : see reference to class template instantiation 'std::_Tmap_traits<_Kty,_Ty,_Pr,_Alloc,_Mfl>' being compiled 1> with 1> [ 1> _Kty=std::string, 1> _Ty=int, 1> _Pr=std::less<std::string>, 1> _Alloc=std::allocator<std::pair<const std::string,int>>, 1> _Mfl=false 1> ] 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(520) : see reference to class template instantiation 'std::_Tree_nod<_Traits>' being compiled 1> with 1> [ 1> _Traits=std::_Tmap_traits<std::string,int,std::less<std::string>,std::allocator<std::pair<const std::string,int>>,false> 1> ] 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(659) : see reference to class template instantiation 'std::_Tree_val<_Traits>' being compiled 1> with 1> [ 1> _Traits=std::_Tmap_traits<std::string,int,std::less<std::string>,std::allocator<std::pair<const std::string,int>>,false> 1> ] 1> c:\program files\microsoft visual studio 10.0\vc\include\map(81) : see reference to class template instantiation 'std::_Tree<_Traits>' being compiled 1> with 1> [ 1> _Traits=std::_Tmap_traits<std::string,int,std::less<std::string>,std::allocator<std::pair<const std::string,int>>,false> 1> ] 1> c:\users\chris\desktop\311\ideas\idea1\idea1\abstractrmanagers.h(28) : see reference to class template instantiation 'std::map<_Kty,_Ty>' being compiled 1> with 1> [ 1> _Kty=std::string, 1> _Ty=int 1> ] 1> c:\users\chris\desktop\311\ideas\idea1\idea1\abstractrmanagers.h(30) : see reference to class template instantiation 'AbstractRManagers<Type>' being compiled 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::stack<_Ty,_Container> &,const std::stack<_Ty,_Container> &)' : could not deduce template argument for 'const std::stack<_Ty,_Container> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\stack(166) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::stack<_Ty,_Container> &,const std::stack<_Ty,_Container> &)' : could not deduce template argument for 'const std::stack<_Ty,_Container> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\stack(166) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::deque<_Ty,_Alloc> &,const std::deque<_Ty,_Alloc> &)' : could not deduce template argument for 'const std::deque<_Ty,_Alloc> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\deque(1725) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::deque<_Ty,_Alloc> &,const std::deque<_Ty,_Alloc> &)' : could not deduce template argument for 'const std::deque<_Ty,_Alloc> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\deque(1725) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::deque<_Ty,_Alloc> &,const std::deque<_Ty,_Alloc> &)' : could not deduce template argument for 'const std::deque<_Ty,_Alloc> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\deque(1725) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Tree<_Traits> &,const std::_Tree<_Traits> &)' : could not deduce template argument for 'const std::_Tree<_Traits> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(1885) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Tree<_Traits> &,const std::_Tree<_Traits> &)' : could not deduce template argument for 'const std::_Tree<_Traits> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(1885) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Tree<_Traits> &,const std::_Tree<_Traits> &)' : could not deduce template argument for 'const std::_Tree<_Traits> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(1885) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::vector<_Ty,_Ax> &,const std::vector<_Ty,_Ax> &)' : could not deduce template argument for 'const std::vector<_Ty,_Ax> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\vector(1502) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::vector<_Ty,_Ax> &,const std::vector<_Ty,_Ax> &)' : could not deduce template argument for 'const std::vector<_Ty,_Ax> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\vector(1502) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::vector<_Ty,_Ax> &,const std::vector<_Ty,_Ax> &)' : could not deduce template argument for 'const std::vector<_Ty,_Ax> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\vector(1502) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::unique_ptr<_Ty,_Dx> &,const std::unique_ptr<_Ty2,_Dx2> &)' : could not deduce template argument for 'const std::unique_ptr<_Ty,_Dx> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\memory(2582) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::unique_ptr<_Ty,_Dx> &,const std::unique_ptr<_Ty2,_Dx2> &)' : could not deduce template argument for 'const std::unique_ptr<_Ty,_Dx> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\memory(2582) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::unique_ptr<_Ty,_Dx> &,const std::unique_ptr<_Ty2,_Dx2> &)' : could not deduce template argument for 'const std::unique_ptr<_Ty,_Dx> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\memory(2582) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::reverse_iterator<_RanIt> &,const std::reverse_iterator<_RanIt2> &)' : could not deduce template argument for 'const std::reverse_iterator<_RanIt> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1356) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::reverse_iterator<_RanIt> &,const std::reverse_iterator<_RanIt2> &)' : could not deduce template argument for 'const std::reverse_iterator<_RanIt> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1356) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::reverse_iterator<_RanIt> &,const std::reverse_iterator<_RanIt2> &)' : could not deduce template argument for 'const std::reverse_iterator<_RanIt> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1356) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Revranit<_RanIt,_Base> &,const std::_Revranit<_RanIt2,_Base2> &)' : could not deduce template argument for 'const std::_Revranit<_RanIt,_Base> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1179) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Revranit<_RanIt,_Base> &,const std::_Revranit<_RanIt2,_Base2> &)' : could not deduce template argument for 'const std::_Revranit<_RanIt,_Base> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1179) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Revranit<_RanIt,_Base> &,const std::_Revranit<_RanIt2,_Base2> &)' : could not deduce template argument for 'const std::_Revranit<_RanIt,_Base> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1179) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::pair<_Ty1,_Ty2> &,const std::pair<_Ty1,_Ty2> &)' : could not deduce template argument for 'const std::pair<_Ty1,_Ty2> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\utility(318) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::pair<_Ty1,_Ty2> &,const std::pair<_Ty1,_Ty2> &)' : could not deduce template argument for 'const std::pair<_Ty1,_Ty2> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\utility(318) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::pair<_Ty1,_Ty2> &,const std::pair<_Ty1,_Ty2> &)' : could not deduce template argument for 'const std::pair<_Ty1,_Ty2> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\utility(318) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2676: binary '<' : 'const std::string' does not define this operator or a conversion to a type acceptable to the predefined operator ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========

    Read the article

  • Python, SWIG and other strange things

    - by wanderameise
    hey, I have a firmware for an USB module I can already control by visual C. Now I want to port this to python. for this I need the octopus library which is written in c. I found a file called octopus_wrap which was created by SWIG! then I found a makefile which says: python2.5: swig -python -outdir ./ ../octopus.i gcc -fPIC -c ../../liboctopus/src/octopus.c gcc -fPIC -c ../octopus_wrap.c -I /usr/include/python2.5 gcc -fPIC -shared octopus_wrap.o octopus.o /usr/lib/libusb.so -o _octopus.so python2.4: swig -python -outdir ./ ../octopus.i gcc -fPIC -c ../../liboctopus/src/octopus.c gcc -fPIC -c ../octopus_wrap.c -I /usr/include/python2.4 gcc -fPIC -shared octopus_wrap.o octopus.o /usr/lib/libusb.so -o _octopus.so win: gcc -fPIC -c ../../liboctopus/src/octopus.c -I /c/Programme/libusb-win32-device-bin-0.1.10.1/include gcc -fPIC -c octopus_wrap.c -I /c/Python25/libs -lpython25 -I/c/Python25/include -I /c/Programme/libusb-win32-device-bin-0.1.10.1/include gcc -fPIC -shared *.o -o _octopus.pyd -L/c/Python25/libs -lpython25 -lusb -L/c/Programme/libusb-win32-device-bin-0.1.10.1/lib/gcc clean: rm -f octopus* _octopus* install_python2.4: cp _octopus.so /usr/local/lib/python2.4/site-packages/ cp octopus.py /usr/local/lib/python2.4/site-packages/ install_python2.5: cp _octopus.so /usr/local/lib/python2.5/site-packages/ cp octopus.py /usr/local/lib/python2.5/site-packages/ I dont know how to handle this but as far as I can see octopus.py and _octopus.so are the resulting output files which are relevant to python right? luckily someone already did that and so I put those 2 files to my "python26/lib" folder (hope it doesnt matter if it´s python 2.5 or 2.6?!) So when working with the USB device the octopus.py is the library to work with! Importing this file makes several problems: >>> Traceback (most recent call last): File "C:\Users\ameise\My Dropbox\µC\AVR\OCTOPUS\octopususb-0.5\demos\python \blink_status.py", line 8, in <module> from octopus import * File "C:\Python26\lib\octopus.py", line 7, in <module> import _octopus ImportError: DLL load failed: module not found. and here´s the related line 7 : import _octopus So there´s a problem considering the .so file! What could be my next step? I know that´s a lot of confusing stuff but I hope anyone of you could bring some light in my mind! thy in advance

    Read the article

  • CakePHP Help with Blog Tutorial

    - by Cameron
    I've just been following the tutorial on the CakePHP website to create a simple Blog as a way to learn a bit about Cake. However I have run into an error and not sure why as I have followed exactly what the tutorial says. The errors: Notice (8): Undefined property: View::$Html [APP/views/posts/index.ctp, line 17] Fatal error: Call to a member function link() on a non-object in /Users/cameron/Sites/dentist/app/views/posts/index.ctp on line 17 Here is my posts_controller <?php class PostsController extends AppController { var $helpers = array('Html', 'Form'); var $name = 'Posts'; function index() { $this->set('posts', $this->Post->find('all')); } function view($id = null) { $this->Post->id = $id; $this->set('post', $this->Post->read()); } } ?> and here is my model <?php class Post extends AppModel { var $name = 'Post'; } ?> and here are my views <!-- File: /app/views/posts/index.ctp --> <h1>Blog posts</h1> <table> <tr> <th>Id</th> <th>Title</th> <th>Created</th> </tr> <!-- Here is where we loop through our $posts array, printing out post info --> <?php foreach ($posts as $post): ?> <tr> <td><?php echo $post['Post']['id']; ?></td> <td> <?php echo $this->Html->link($post['Post']['title'], array('controller' => 'posts', 'action' => 'view', $post['Post']['id'])); ?> </td> <td><?php echo $post['Post']['created']; ?></td> </tr> <?php endforeach; ?> </table>

    Read the article

  • i had problem in adding the additional content in my pdf

    - by Ayyappan.Anbalagan
    I am converting my data set into a pdf document.My data set contains the product bill details.So,at the top of the pdf i need to added some more content like "my company name & address customer name, date of bill,bill no" Below code i am using to convert into pdf. public static void Exportdata(DataTable dataTable, HttpResponse Response, int val) { //String filename = String.Concat(name, "-", DateTime.Today.Day.ToString(), "/", DateTime.Today.Month.ToString(), "/", DateTime.Today.Year.ToString(), ".pdf"); Document pdfDoc = new Document(PageSize.A4, 30, 30, 40, 25); System.IO.MemoryStream mStream = new System.IO.MemoryStream(); PdfWriter writer = PdfWriter.GetInstance(pdfDoc, mStream); //int cols = 0; //int rows = 0; int cols = dataTable.Columns.Count; int rows = dataTable.Rows.Count; pdfDoc.Open(); iTextSharp.text.Table pdfTable = new iTextSharp.text.Table(cols, rows); pdfTable.BorderWidth = 1; pdfTable.Width = 100; pdfTable.Padding = 1; pdfTable.Spacing = 1; //creating table headers for (int i = 0; i < cols; i++) { Cell cellCols = new Cell(); Font ColFont = FontFactory.GetFont(FontFactory.HELVETICA, 8, Font.BOLD); Chunk chunkCols = new Chunk(dataTable.Columns[i].ColumnName, ColFont); cellCols.Add(chunkCols); pdfTable.AddCell(cellCols); } //creating table data (actual result) for (int k = 0; k < rows; k++) { for (int j = 0; j < cols; j++) { Cell cellRows = new Cell(); Font RowFont = FontFactory.GetFont(FontFactory.HELVETICA, 6); Chunk chunkRows = new Chunk(dataTable.Rows[k][j].ToString(), RowFont); cellRows.Add(chunkRows); pdfTable.AddCell(cellRows); } } pdfDoc.Add(pdfTable); pdfDoc.Close(); Response.ContentType = "application/octet-stream"; if (val == 1) { Response.AddHeader("Content-Disposition", "attachment; filename=Users.pdf"); } else if (val == 2) { Response.AddHeader("Content-Disposition", "attachment; filename=Customers.pdf"); } else if (val == 3) { Response.AddHeader("Content-Disposition", "attachment; filename=Materials.pdf"); } else { Response.AddHeader("Content-Disposition", "attachment; filename=Reports.pdf"); } Response.Clear(); Response.BinaryWrite(mStream.ToArray()); //Response.Write(mStream.ToString()); HttpContext.Current.ApplicationInstance.CompleteRequest(); Response.End(); }

    Read the article

  • EXT-GWT Portal: How to get all Portlets?

    - by Lars
    Hi all this is my first Question here! Im just making my first steps with (Ext-) GWT. I´m testing the Ext-GWT libraries and really: These are absolute great! Now my question: Is it possible to make a kind of "clear-Portal" or "hide all portles" for a defined Portal? Or have i always manually clear the portal like in my example code above? My sample code looks like this: //define the Portal, 2 columns, each 50% auf width, with borders and Backgroundcolor portal = new Portal(2); portal.setBorders(true); portal.setStyleAttribute("backgroundColor", "white"); portal.setColumnWidth(0, .50); portal.setColumnWidth(1, .50); //define a Portlet for showing all Users portletUser = new Portlet(); portletUser.setHeading("Benutzer"); configPanel(portletUser); portletUser.setLayout(new FitLayout()); CompUserList compUserList = new CompUserList(); portletUser.add(compUserList); portletUser.setHeight(250); //define a Portlet for showing all Vehicles portletVehicles = new Portlet(); portletVehicles.setHeading("Fahrzeuge"); configPanel(portletVehicles); portletVehicles.setLayout(new FitLayout()); CompVehicleList compVehicleList = new CompVehicleList(); portletVehicles.add(compVehicleList); portletVehicles.setHeight(250); //define a portlet for showing all countries portletCountries = new Portlet(); portletCountries.setHeading("Länder"); configPanel(portletCountries); portletCountries.setLayout(new FitLayout()); CompCountryList compCountryList = new CompCountryList(); portletCountries.add(compCountryList); portletCountries.setHeight(250); //add both Portlets to Portal portal.add(portletUser, 0); portal.add(portletVehicles, 1); So first of all this works fine and looks great :-) Now i have a a button in a accordeon menu. The Listener on this button should hide all portlets in the portal (at this time its the portletUser and portletVehicles) and then add another portlet (for example the portletCountries): portletUser.hide(); portletVehicles.hide(); portal.add(portletCountries, 0) Question from above again ;-) Is it possible to make a kind of "clear-Portal" or "hide all portles" for a defined Portal? Or have i always manually clear the portal like in my example code above? What is the best practice for this functionallity? Thanks all for your tips! Lars.

    Read the article

  • Django & google openid authentication (openid.ax) with socialauth

    - by Zayatzz
    Hello I am trying to use django-socialauth (http://github.com/uswaretech/Django-Socialauth) for authenticating users for my django project. This is firs time working with openid and i've had to figure out how exactly this open id works. I have more or less understood it, by now, but there are few things that elude me. The authentication process starts when the request is put together in in django-socialauth.openid_consumer.views.begin. I can see that the outgoing authentication request is more or less something like this: https://www.google.com/accounts/o8/ud?openid.assoc_handle=AOQobUckRThPUj3K1byG280Aze-dnfc9Iu6AEYaBwvHE11G0zy8kY8GZ& openid.ax.if_available=fname& openid.ax.mode=fetch_request& openid.ax.required=email& openid.ax.type.email=http://axschema.org/contact/email& openid.ax.type.fname=http://example.com/schema/fullname& openid.claimed_id=http://specs.openid.net/auth/2.0/identifier_select& openid.identity=http://specs.openid.net/auth/2.0/identifier_select& openid.mode=checkid_setup&openid.ns=http://specs.openid.net/auth/2.0& openid.ns.ax=http://openid.net/srv/ax/1.0& openid.ns.sreg=http://openid.net/extensions/sreg/1.1& openid.realm=http://localhost/& openid.return_to=http://localhost/social/gmail_login/complete/?janrain_nonce=2010-03-20T11%3A19%3A44ZPZCjNc&openid.sreg.optional=postcode,country,nickname,email This is lot like 2nd example here: http://code.google.com/apis/accounts/docs/OpenID.html#Samples The problem is, that the request, i get back, is nothing like the corresponding example from code.google.com (look at the 3rd example in example responses. Response dict i get is like this: { 'openid.op_endpoint': 'https://www.google.com/accounts/o8/ud', 'openid.sig': 'QWMa4x4ruMUvSCfLwKV6CZRuo0E=', 'openid.ext1.type.email': 'http://axschema.org/contact/email', 'openid.return_to': 'http://localhost/social/gmail_login/complete/?janrain_nonce=2010-03-20T17%3A54%3A06ZHV4cqh', 'janrain_nonce': '2010-03-20T17:54:06ZHV4cqh', 'openid.response_nonce': '2010-03-20T17:54:06ZdC5mMu9M_6O4pw', 'openid.claimed_id': 'https://www.google.com/accounts/o8/id?id=AItOghawkFz0aNzk91vaQWhD-DxRJo6sS09RwM3SE', 'openid.mode': 'id_res', 'openid.ns.ext1': 'http://openid.net/srv/ax/1.0', 'openid.signed': 'op_endpoint,claimed_id,identity,return_to,response_nonce,assoc_handle,ns.ext1,ext1.mode,ext1.type.email,ext1.value.email', 'openid.ext1.value.email': '[email protected]', 'openid.assoc_handle': 'AOQobUfssTJ2IxRlxrIvU4Xg8HHQKKTEuqwGxvwwuPR5rNvag0elGlYL', 'openid.ns': 'http://specs.openid.net/auth/2.0', 'openid.identity': 'https://www.google.com/accounts/o8/id?id=AItOawkghgfhf1FkvaQWhD-DxRJo6sS09RwMKjASE', 'openid.ext1.mode': 'fetch_response'} The socialauth itself has been built to accept my email address this way: elif request.openid and request.openid.ax: email = request.openid.ax.get('email') And obviously this fails. Why i am asking all this is, that perhaps i am doing something wrong and my outgoing request is wrong? Or am i doing all correctly and should change the socialaouth module to accept info in a new way and then commit the change? Alan

    Read the article

  • how to store xml structure in a persistence layer?

    - by fayer
    i wonder how i could store a xml structure in a persistence layer. cause the relational data looks like: <entity id="1000070"> <name>apple</name> <entities> <entity id="7002870"> <name>mac</name> <entities> <entity id="7002907"> <name>leopard</name> <entities> <entity id="7024080"> <name>safari</name> </entity> <entity id="7024701"> <name>finder</name> </entity> </entities> </entity> </entities> </entity> <entity id="7024080"> <name>iphone</name> <entities> <entity id="7024080"> <name>3g</name> </entity> <entity id="7024701"> <name>3gs</name> </entity> </entities> </entity> <entity id="7024080"> <name>ipad</name> </entity> </entities> </entity> as you can see, it has no static structure but a dynamical one. mac got 2 descendant levels while iphone got 1 and ipad got 0. i wonder how i could store this data the best way? what are my options. cause it seems impossible to store it in a mysql database due to this dynamical structure. is the only way to store it as a xml file then? is the speed of getting information (xpath/xquery/simplexml) from a xml file worse or greater than from mysql? what are the pros and cons? do i have other options? is storing information in xml files, suited for a lot of users accessing it at the same time? would be great with feedbacks!! thanks!

    Read the article

  • Determine the 'Overtype' mode using Javascript

    - by Snorkpete
    We are creating a web app to replace an old-school green-screen application. In the green-screen app, as the user presses the Insert key to switch between overtype and insert modes, the cursor changes to indicate which input mode the user is currently in. In IE (which is the official browser of the company), overtype mode also works, but there's no visual indication as to whether overtype mode is on or not, until the user starts typing and possibly over-writes existing information unexpectedly. I'd like to put some sort of visual indicator on the screen if in overtype mode. How can you determine if the browser is in 'overtype mode' from Javascript? Is there some property or function i can query to determine if the browser is in overtype mode? Even an IE-specific solution would be helpful, since our corporate policy dictates the browser to use as IE7 (pure torture, btw). (I do know that one solution is to do check for key presses of the Insert key. However, it's a solution that I'd prefer to avoid since that method seems a bit flaky & error-prone because I can't guarantee what mode the user would be in BEFORE he/she hits my page. ) The reasoning behind this question: The functionality of this portion of the green-screen app is such that the user can select from a list of 'preformatted bodies of text'. crude eg. The excess for this policy is: $xxxxxx and max limit is:$xxxxxx Date of policy is: xx/xx/xxxx and expires : xx/xx/xxxx Some other irrelevant text After selecting this 'preformatted text', the user would then use overtype to replace the x's with actual values, without disturbing the alignment of the rest of the text. (To be clear, they can still edit any part of the 'preformatted text' if they so wished. It's just that usually, they just wish to replace specific portions of the text. Keeping the alignment is important since these sections of text can end up on printed documents.) Of course, the same effect can be achieved by just selecting the x's to replace first, but it would be helpful (with respect to easing the transition to the web app) to allow old methods of doing things to continue to work, while still allowing 'web methods' to be used by the more tech-savvy users. Essentially, we're trying to make the initial transition from the green-screen app to the web app be as seemless as possible to minimise the resistance from the long-time green-screeners.

    Read the article

  • SSH login with expect(1). How to exit expect and remain in SSH?

    - by Koroviev
    So I wanted to automate my SSH logins. The host I'm with doesn't allow key authentication on this server, so I had to be more inventive. I don't know much about shell scripting, but some research showed me the command 'expect' and some scripts using it for exactly this purpose. I set up a script and ran it, it worked perfectly to login. #!/usr/bin/env expect -f set password "my_password" match_max 1000 spawn ssh -p 2222 "my_username"@11.22.11.22 expect "*?assword:*" send -- "$password\r" send -- "\r" expect eof Initially, it runs as it should. Last login: Wed May 12 21:07:52 on ttys002 esther:~ user$ expect expect-test.exp spawn ssh -p 2222 [email protected] [email protected]'s password: Last login: Wed May 12 15:44:43 2010 from 20.10.20.10 -jailshell-3.2$ But that's where the success ends. Commands do not work, but hitting enter just makes a new line. Arrow keys and other non-alphanumeric keys produce symbols like '^[[C', '^[[A', '^[OQ' etc.[1] No other prompt appears except the two initially created by the expect script. Any ignored commands will be executed by my local shell once expect times out. An example: -jailshell-3.2$ whoami ls pwd hostname (...time passes, expect times out...) esther:~ user$ whoami user esther:~ ciaran$ ls Books Documents Movies Public Code Downloads Music Sites Desktop Library Pictures expect-test.exp esther:~ ciaran$ pwd /Users/ciaran esther:~ ciaran$ hostname esther.local As I said, I have no shell scripting experience, but I think it's being caused because I'm still "inside of" expect, but not "inside of" SSH. Is there any way to terminate expect once I've logged in, and have it hand over the SSH session to me? I've tried commands like 'close' and 'exit', after " send -- "\r" ". Yeah, they do what I want and expect dies, but it vindictively takes the SSH session down with it, leaving me back where I started. What I really need is for expect to do its job and terminate, leaving the SSH session back in my hands as if I did it manually. All help is appreciated, thanks. [1] I know there's a name for this, but I don't know what it is. And this is one of those frightening things which can't be googled, because the punctuation characters are ignored. As a side question, what's the story here?

    Read the article

  • Looking for efficient scaling patterns for Silverlight application with distributed text-file data s

    - by Edward Tanguay
    I'm designing a Silverlight software solution for students and teachers to record flashcards, e.g. words and phrases that students find while reading and errors that teachers notice while teaching. Requirements are: each person publishes his own flashcards in a file on a web server, e.g. http://:www.mywebserver.com/flashcards.txt other people subscribe to that person's flashcards by using a Silverlight flashcard reader that I have developed and entering the URLs of flashcard files they want to subscribe to, URLs and imported flashcards being saved in IsolatedStorage the flashcards.txt file has the following simple format: title, then blocks of question/answers: Jim Smith's flashcards from English class 53-222, winter semester 2009 ==fla Das kann nicht sein. That can't be. ==fla Es sei denn, er kommt nicht. Unless he doesn't come. The user then makes public the URL to his flashcard file and other readers begin reading in his flashcards. In order to lower the bar for non-technical users to contribute, it will even be possible for them to save this text in a Google Document, which they publish and distribute the URL. The flashcard readers will then recognize it is a google document and perform the necessary screen scraping to get at the raw text. I have two technical questions about this approach: What is a best way to plan now for scalability issues: e.g. if your reader is subscribed to 10 flashcard files that are each 200K, it will have to download 2MB of text just to find out if any new flashcards are available. Or can I somehow accurately and consistently get at the last update date/time of text files on servers and published google docs? Each reader will have the ability to allow the person to test himself on imported flashcards and add meta information to them, e.g. categorize them, edit them, etc. This information will be stored in IsolatedStorage along with the important flashcards themselves. What is a good pattern to allow these readers to share and synchronize this meta data, e.g. so when you are looking at a flashcard you can see that 5 other people have made corrections to it. The best solution I can think of now is that the Silverlight readers will have to republish their data to a central database, but then there is the problem of uniquely identifying each flashcard, the best approach seems to be URL + position-in-file, or even better URL + original text of both question and answer fields, but both of these have their obvious drawbacks. The main requirement is that the bar for participation is kept as low as possible, i.e. type text in a google document, publish it, distribute the URL, and you're publishing within the flashcard community. So I want to come up with the most efficient technical solutions in order to compensate for the lack of database, lack of unique ids, etc. For those who have designed or developed similar non-traditional, distributed database projects like this, what advice, experience or best-practice tips you can share on the above two points?

    Read the article

  • mutiple database in codeigniter

    - by adisembiring
    Hi ..., I'm trying to implement mutiple database in CI. My code Is here: //database.php $active_group = "default"; $active_record = TRUE; $db['default']['hostname'] = "localhost"; $db['default']['username'] = "root"; $db['default']['password'] = "root"; $db['default']['database'] = "ravelex"; $db['default']['dbdriver'] = "mysql"; $db['default']['dbprefix'] = "rvx_"; $db['default']['pconnect'] = TRUE; $db['default']['db_debug'] = TRUE; $db['default']['cache_on'] = FALSE; $db['default']['cachedir'] = ""; $db['default']['char_set'] = "utf8"; $db['default']['dbcollat'] = "utf8_general_ci"; $db['smf']['hostname'] = "localhost"; $db['smf']['username'] = "root"; $db['smf']['password'] = "root"; $db['smf']['database'] = "smf"; $db['smf']['dbdriver'] = "mysql"; $db['smf']['dbprefix'] = "smf_"; $db['smf']['pconnect'] = TRUE; $db['smf']['db_debug'] = TRUE; $db['smf']['cache_on'] = FALSE; $db['smf']['cachedir'] = ""; $db['smf']['char_set'] = "utf8"; $db['smf']['dbcollat'] = "utf8_general_ci"; The model is //user_model.php class user_model extends Model { private $ravelex_db; function user_model() { parent::Model(); $this->ravelex_db = $this->load->database('default', TRUE); } function find_all() { print_r($this->ravelex_db); $q = $this->ravelex_db->get('users'); return $q->result(); } } //smf_user_model.php class smf_user_model extends Model { private $smf_db; function smf_user_model() { parent::Model(); $this->smf_db = $this->load->database('smf', TRUE); } function find_all() { $q = $this->smf_db->get('members'); return $q->result(); } } Controller tester class mutipledb extends Controller { function mutipledb() { parent::Controller(); $this->load->database(); $this->load->model('user_model'); $this->load->model('smf_user_model'); } function index() { print_r($this->user_model->find_all()); print_r($this->smf_user_model->find_all()); } } There are some error, The first database uses the second database name. But it still use it's prefix. The error is A Database Error Occurred Error Number: 1146 Table 'smf.rvx_users' doesn't exist SELECT * FROM (`rvx_users`)

    Read the article

  • "Wrapping" a BindingList<T> propertry with a List<T> property for serialization.

    - by Eric
    I'm writing an app that allows users search and browse catalogs of widgets. My WidgetCatalog class is serialized and deserialized to and from XML files using DataContractSerializer. My app is working now but I think I can make the code a lot more efficient if I started taking advantage of data binding rather then doing everything manually. Here's a stripped down version of my current WidgetCatalog class. [DataContract(Name = "WidgetCatalog")] class WidgetCatalog { [DataContract(Name = "Name")] public string Name { get; set; } [DataContract(Name = "Widgets")] public List<Widget> Widgets { get; set; } } I had to write a lot of extra code to keep my UI in sync when widgets are added or removed from a catalog, or their internal properties change. I'm pretty inexperienced with data-binding, but I think I want a BindingList<Widget> rather than a plain old List<Widget>. Is this right? In the past when I had similar needs I found that BindingList<T> does not serialize very well. Or at least the Event Handers between the items and the list are not serialized. I was using XmlSerializer though, and DataContractSerializer may work better. So I'm thinking of doing something like the code below. [DataContract(Name = "WidgetCatalog")] class WidgetCatalog { [DataMember(Name = "Name")] public string Name { get; set; } [DataMember(Name = "Widgets")] private List<Widget> WidgetSerializationList { get { return this._widgetBindingList.ToList<Widget>(); } set { this._widgetBindingList = new BindingList<Widget>(value); } } //these do not get serialized private BindingList<Widget> _widgetBindingList; public BindingList<Widget> WidgetBindingList { get { return this._widgetBindingList; } } public WidgetCatalog() { this.WidgetSerializationList = new List<Widget>(); } } So I'm serializing a private List<Widget> property, but the GET and SET accessors of the property are reading from, and writing to theBindingList<Widget> property. Will this even work? It seems like there should be a better way to do this.

    Read the article

  • trouble with utf-8 chars & apache2 rewrite rules

    - by tixrus
    I see the post http://stackoverflow.com/questions/2565864/validating-utf-8-in-htaccess-rewrite-rule and I think that is great, but a more fundamental problem I am having first: I needed to expand to handle utf-8 chars for query string parameters, names of directories, files, and used in displays to users etc. I configured my Apache with DefaultCharset utf-8 and also my php if that matters. My original rewrite rule filtered everything except regular A-Za-z and underscore and hyphen. and it worked. Anything else would give you a 404 (which is what I want!) Now, however it seems that everything matches, including stuff I don't want, however, although it seems to match it doesn't go in the query string unless it is a regular A-Za-z_- character string. I find this confusing, because the rule says put whatever you matched into the query string: Here is the original rule: RewriteRule ^/puzzle/([A-Za-z_-]+)$ /puzzle.php?g=$1 [NC] and here is the revised rule: RewriteRule ^/puzzle/(\w+)$ /puzzle.php?g=$1 [NC] I made the change because somewhere I read that \w matches ALL the alpha chars where as A-Zetc. only matches the ones without accents and stuff. It doesn't seem to matter which of those rules I use: Here is what happens: In the application I have this: echo $_GET['g']; If I feed it a url like http://mydomain.com/puzzle/USA it echoes out "USA" and works fine. If I feed it a url like http://mydomain.com/puzzle/México it echoes nothing for that and warns me that index g is not defined and of course doesn't get resources for Mexico. if I feed it a url like http://mydomain.com/puzzle/fuzzle/buzzle/j.qle it does the same thing. This last case should be a 404! And it does this no matter which of the above rules I use. I configured a rewrite log RewriteLogLevel 5 RewriteLog /opt/local/apache2/logs/puzzles.httpd.rewrite but it is empty. Here is from the regular access log (it gives a status of 200) [26/May/2010:11:21:42 -0700] "GET /puzzle/M%C3%A9xico HTTP/1.1" 200 342 [26/May/2010:11:21:54 -0700] "GET /puzzle/M/l.foo HTTP/1.1" 200 342 What can I do to get these $%#$@(*#@!!! characters but not slash, dot or other non-alpha into my program, and once there, will it decode them correctly??? Would posix char classes work any better? Is there anything else I need to configure?

    Read the article

  • load google annotated chart within jquery ui tab content via ajax method

    - by twmulloy
    Hi, I am encountering an issue with trying to load a google annotated chart (http://code.google.com/apis/visualization/documentation/gallery/annotatedtimeline.html) within a jquery ui tab using content via ajax method (http://jqueryui.com/demos/tabs/#ajax). If instead I use the default tabs functionality, writing out the code things work fine: <div id="tabs"> <ul> <li><a href="#tabs-1">Chart</a></li> </ul> <div id="tabs-1"> <script type="text/javascript"> google.load('visualization', '1', {'packages':['annotatedtimeline']}); google.setOnLoadCallback(drawChart); function drawChart() { var data = new google.visualization.DataTable(); data.addColumn('date', 'Date'); data.addColumn('number', 'cloudofinc.com'); data.addColumn('string', 'header'); data.addColumn('string', 'text') data.addColumn('number', 'All Clients'); data.addRows([ [new Date('May 12, 2010'), 2, '2 New Users', '', 3], [new Date('May 13, 2010'), 0, undefined, undefined, 0], [new Date('May 14, 2010'), 0, undefined, undefined, 0], ]); var chart = new google.visualization.AnnotatedTimeLine(document.getElementById('chart_users')); chart.draw(data, { displayAnnotations: false, fill: 10, thickness: 1 }); } </script> <div id='chart_users' style='width: 100%; height: 400px;'></div> </div> </div> But if I use the ajax method for jquery ui tab and point to the partial for the tab, it doesn't work completely. The page renders and once the chart loads, the browser window goes white. However, you can see the tab partial flash just before the chart appears to finish rendering (the chart never actually displays). I have verified that the partial is indeed loading properly without the chart. <div id="tabs"> <ul> <li><a href="ajax/tabs-1">Chart</a></li> </ul> </div>

    Read the article

  • Asp.net hosting equivalent of Dreamhost (pricing, features and support)

    - by Cherian
    Disclaimer: I have browsed http://stackoverflow.com/questions/tagged/asp.net+hosting and didn’t find anything quite similar in value to Dreamhost. One of the biggest impediments IMHO for developing web applications on asp.net is the cost of deployment. I am not talking about building sites like Stackoverflow.com or plentyoffish.com. This is about sites that are bigger than brochureware and smaller than ones that require dedicated servers. Let me give you an example. xmec.org is an asp.net site I maintain for my college alumni. On an average it’s slated to hit around 1000-1100 views per day. At present it’s hosted on godaddy. The service is so damn pathetic; I am using it only because of the lack of options. The site doesn’t scale (no, it’s not the code) and the web control panels are extremely slow. The money I pay doesn’t justify the service or the performance. Every deployment push is a visit to the infuriating web control panel to set the permissions and the root directories. Had I developed it in python, this would have been deployed on Dreamhost.com with $10/year hosting fees (they have offers running all throughout) 50 GB space 5 MySQL Databases Shell / FTP Users POP / SMTP Access Unlimited Domains hosting Unlimited Sub domains hosting Unlimited Domains Forwarded/Mirrored Custom DNS (These are the only ones I could think of. More at the feature page) With a dream host shell, I even have a svn checked-out version of wordpress for my blog. Now, that’s control! To my question: Is there any asp.net (preferably .net 3.5. Dreamhost keeps on updating versions every fortnight) hosting company providing remotely similar feature-sets and pricing like Dreamhost. My requirements are: Less than $15-25/ year Typical WISP minus PHP .net 3.5 SP1 Full Trust mode(I can live with medium trust, if not for the IL emitting libraries) Isolated Application Pool 5 – 10 MySQL db’s Unlimited domain hosting MsSql 2005 or 2008 FTP support At Least 5 GB space SMTP IIS 7 Log files Accessibility Moderately good control panel Scripting, shell support Nominal bandwidth Another case in point: Recently I’ve been contemplating building a tool-website to find duplicates and weird characters in my Google contacts and fix them. With asp.net, the best part is that I can do this with LINQ to XML in less than 100 lines of code. What’s bad is the hosting part. I don’t think I stand to make any money out of this and therefore can’t afford to host it on GoGrid or DiscountAsp.net. Godaddy is not an option either. If I do this in python, I can push to this my existing $10 Dreamhost account with another domain pointed. No extra cost. Svn exported with scripts (capability) to change the connection string! Looking at the problem holistically, I think I represent a large breed of programmers playing it cheap and experimenting different things on a regular basis, one of which will become the next twitter/digg.

    Read the article

  • SignalR recording when a Web Page has closed

    - by Benjamin Rogers
    I am using MassTransit request and response with SignalR. The web site makes a request to a windows service that creates a file. When the file has been created the windows service will send a response message back to the web site. The web site will open the file and make it available for the users to see. I want to handle the scenario where the user closes the web page before the file is created. In that case I want the created file to be emailed to them. Regardless of whether the user has closed the web page or not, the message handler for the response message will be run. What I want to be able to do is have some way of knowing within the response message handler that the web page has been closed. This is what I have done already. It doesnt work but it does illustrate my thinking. On the web page I have $(window).unload(function () { if (event.clientY < 0) { // $.connection.hub.stop(); $.connection.exportcreate.setIsDisconnected(); } }); exportcreate is my Hub name. In setIsDisconnected would I set a property on Caller? Lets say I successfully set a property to indicate that the web page has been closed. How do I find out that value in the response message handler. This is what it does now protected void BasicResponseHandler(BasicResponse message) { string groupName = CorrelationIdGroupName(message.CorrelationId); GetClients()[groupName].display(message.ExportGuid); } private static dynamic GetClients() { return AspNetHost.DependencyResolver.Resolve<IConnectionManager>().GetClients<ExportCreateHub>(); } I am using the message correlation id as a group. Now for me the ExportGuid on the message is very important. That is used to identify the file. So if I am going to email the created file I have to do it within the response handler because I need the ExportGuid value. If I did store a value on Caller in my hub for the web page close, how would I access it in the response handler. Just in case you need to know. display is defined on the web page as exportCreate.display = function (guid) { setTimeout(function () { top.location.href = 'GetExport.ashx?guid=' + guid; }, 500); }; GetExport.ashx opens the file and returns it as a response. Thank you, Regards Ben

    Read the article

  • Android Market: Application not visible on some Devices

    - by Andreas
    Hello, i have written an application that needs to process outgoing calls. Everything works fine, the application has already a few hundred downloads, but now i get feedback from people who would like to download it, yet cannot find it. I have done some tests and have found that the permission "PROCESS_OUTGOING_CALLS" seems to be responsible for this. If i include it in an app, people with branded phones (at least in Germany) cannot find it, as soon as i remove this permission, everything is fine (when i re-insert it again, the app vanishes again) The weird thing is, that those users can see other apps which use this permission in the market. I have compared my manifest file to outputs from other manifest files and cannot understand why it doesn't work. Here is the manifest file for a test application i wrote to test the problem: <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.eventkontor.marketavailabilitytest" android:versionName="1.2" android:versionCode="3" android:installLocation="auto"> <application android:icon="@drawable/icon" android:label="@string/app_name"> <activity android:name=".showMain" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> </application> <uses-sdk android:minSdkVersion="3" android:targetSdkVersion="4" /> <uses-permission android:name="android.permission.INTERNET"></uses-permission> <uses-permission android:name="android.permission.PROCESS_OUTGOING_CALLS"></uses-permission> <uses-permission android:name="android.permission.READ_CONTACTS"></uses-permission> <uses-permission android:name="android.permission.VIBRATE"></uses-permission> <uses-permission android:name="android.permission.READ_PHONE_STATE"></uses-permission> <uses-permission android:name="android.permission.ACCESS_WIFI_STATE"></uses-permission> <supports-screens android:normalScreens="true" android:resizeable="true" android:largeScreens="true" android:smallScreens="false"></supports-screens> </manifest> Does anyone have an idea what i'm doing wrong?

    Read the article

  • Adding UIView animation mysteriously changes starting frame

    - by clozach
    I'm working on an app that shows a thumbnail of a photo taken by the user. In order to show a seemless transition from the full-screen image shown in the UIImagePickerController to the thumbnail, I set the frame on my copy of the image to [[UIScreen mainScreen] bounds] and then change the frame to match the frame of an invisible button. (The button allows users to re-take their photo by tapping the thumbnail image.) The trouble is that the starting x-origin of my UIImageView (imageView) is mysteriously starting nearly offscreen to the left: As you can see from the alert, the imageView purports to be located at (0,0), yet it's displaying at something like (-255,0). Here's the code: CGRect frame = [[UIScreen mainScreen] bounds]; imageView.frame = frame; [[[[UIAlertView alloc] initWithTitle:@"Yo!" message:[NSString stringWithFormat:@"starting frame:%@",NSStringFromCGRect(imageView.frame)] delegate:nil cancelButtonTitle:@"K." otherButtonTitles:nil] autorelease] show]; // Slide the enlarged image seamlessly "onto" the photo button [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:1000]; [UIView setAnimationDelay:.5]; imageView.frame = pictureButton.frame; [UIView commitAnimations]; As if to taunt me, the image actually does go full screen if I comment out the animation code: CGRect frame = [[UIScreen mainScreen] bounds]; imageView.frame = frame; [[[[UIAlertView alloc] initWithTitle:@"Yo!" message:[NSString stringWithFormat:@"starting frame:%@",NSStringFromCGRect(imageView.frame)] delegate:nil cancelButtonTitle:@"K." otherButtonTitles:nil] autorelease] show]; // Slide the enlarged image seamlessly "onto" the photo button // [UIView beginAnimations:nil context:nil]; // [UIView setAnimationDuration:1000]; // [UIView setAnimationDelay:.5]; // // imageView.frame = pictureButton.frame; // // [UIView commitAnimations]; (Note: animationDuration will of course be set to something more like .5 in production, not 1000 seconds.) Update — Other weirdness worth mentioning in case it's relevant: It turns out the offset changes depending on the orientation of the camera when the photo was taken. If I take the picture with the phone upside-down, for instance, then the image gets offset vertically as well as horizontally. The picker seems to be filling the image's imageOrientation incorrectly: I have to hold the phone sideways, Home button on the left, to get an image with UIImageOrientationUp. At one point I experimented with setting imageView.clipsToBounds = YES;, which revealed that my image view's frame is in fact correct. Rather, it's the UIImage's placement within the UIImageView that gets offset. Fwiw, the image view's contentMode is the default, UIViewContentModeScaleToFill.

    Read the article

  • foreach loop corrupting my array?

    - by WmasterJ
    Explanation I have a multidimensional array that is iterated over to created a categorized view of people with different research interests. The main array look something like this: Array ( ... ['Cell Biology'] => Array(4 elements) ['Molecular'] => Array(6 elements) ['Biology Education'] => Array(14 elements) ['Plant Biology'] => Array(19 elements) <--- Last element in array ) I know that the entire array is intact and correctly structured. The only information that is inside these array is an user id, like so: Array ('Plant Biology') 19 elements ( [0] => 737 [1] => 742 [2] => 748 ... ) My problem is that after i run the main array through a foreach loop the last 'sub-array' gets messed up. By messed up I mean that what you see about instead look like: String (13 characters) 'Plant Biology' This is without doing at all anything inside the loop with to the array that gets corrupted. Any tips to what it might be? PHP Code // ---> Array is OK here echo "<h2>Research divided</h2>"; // Loop areas and list them in 2 columns foreach($research['areas'] as $area => $areaArray) { // ---> Here it is already corrupted $count = count($areaArray); if($count > 0) { echo "<h3>$area</h3><hr/>"; echo "<table class='area_list'><tr>"; // Loop users within areas, divided up in 2 columns for($i=0 ; $i<$count ; $i++) { $uid = $areaArray[$i]; echo "<li>$uid</li>"; } echo "</tr></table>"; } }

    Read the article

  • objective-c Add to/Edit .plist file

    - by Dave
    Does writeToFile:atomically, add data to an existing .plist? Is it possible to modify a value in a .plist ? SHould the app be recompiled to take effect the change? I have a custom .plist list in my app. The structure is as below: <array> <dict> <key>Title</key> <string>MyTitle</string> <key>Measurement</key> <dict> <key>prop1</key> <real>28.86392</real> <key>prop2</key> <real>75.12451</real> </dict> <key>Distance</key> <dict> <key>prop3</key> <real>37.49229</real> <key>prop4</key> <real>58.64502</real> </dict> </dict> </array> The array tag holds multiple items with same structure. I need to add items to the existing .plist. Is that possible? I can write a UIView to do just that, if so. *EDIT - OK, I just tried to writetofile hoping it would atleast overwrite if not add to it. Strangely, the following code selects different path while reading and writing. NSString *rootPath = [NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) objectAtIndex:0]; The .plist file is in my project. I can read from it. When I write to it, it is creating a .plist file and saving it in my /users/.../library/! Does this make sense to anyone?

    Read the article

  • Rail test case fixtures not loading

    - by Deano
    Rails appears to not be loading any fixtures for unit or functional tests. I have a simple 'products.yml' that parses and appears correct: ruby: title: Programming Ruby 1.9 description: Ruby is the fastest growing and most exciting dynamic language out there. If you need to get working programs delivered fast, you should add Ruby to your toolbox. price: 49.50 image_url: ruby.png My controller functional test begins with: require 'test_helper' class ProductsControllerTest < ActionController::TestCase fixtures :products setup do @product = products(:one) @update = { :title => 'Lorem Ipsum' , :description => 'Wibbles are fun!' , :image_url => 'lorem.jpg' , :price => 19.95 } end According to the book, Rails should "magically" load the fixtures (as my test_helper.rb has fixtures :all in it. I also added the explicit fixtures load (seen above). Yes Rails complains: user @ host ~/Dropbox/Rails/depot > rake test:functionals (in /Somewhere/Users/user/Dropbox/Rails/depot) /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby -Ilib:test "/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/rake-0.8.3/lib/rake/rake_test_loader.rb" "test/functional/products_controller_test.rb" Loaded suite /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/rake-0.8.3/lib/rake/rake_test_loader Started EEEEEEE Finished in 0.062506 seconds. 1) Error: test_should_create_product(ProductsControllerTest): NoMethodError: undefined method `products' for ProductsControllerTest:Class /test/functional/products_controller_test.rb:7 2) Error: test_should_destroy_product(ProductsControllerTest): NoMethodError: undefined method `products' for ProductsControllerTest:Class /test/functional/products_controller_test.rb:7 ... I did come across the other Rails test fixture question http://stackoverflow.com/questions/1547634/rails-unit-testing-doesnt-load-fixtures, but that leads to a plugin issue (something to do with the order of loading fixtures). BTW, I am developing on Mac OS X 10.6 with Rail 2.3.5 and Ruby 1.8.7, no additional plugins (beyond the base install). Any pointers on how to debug, why the magic of Rails appears to be failing here? Is it a version problem? Can I trace code into the libraries and find the answer? There are so many "mixin" modules I can't find where the fixtures method really lives.

    Read the article

  • ForEach loop: Output something different on every second result

    - by Wade D Ouellet
    I have two for each loops and I am trying to output something different for each second result: foreach ($wppost as $wp) { $wp_title = $wp->post_title; $wp_date = strtotime($wp->post_date); $wp_slug = $wp->post_name; $wp_id = $wp->ID; // Start Permalink Template $wp_showurl = $wp_url; $wp_showurl = str_replace("%year%", date('Y', $wp_date), $wp_showurl); $wp_showurl = str_replace("%monthnum%", date('m', $wp_date), $wp_showurl); $wp_showurl = str_replace("%day%", date('d', $wp_date), $wp_showurl); $wp_showurl = str_replace("%hour%", date('H', $wp_date), $wp_showurl); $wp_showurl = str_replace("%minute%", date('i', $wp_date), $wp_showurl); $wp_showurl = str_replace("%second%", date('s', $wp_date), $wp_showurl); $wp_showurl = str_replace("%postname%", $wp_slug, $wp_showurl); $wp_showurl = str_replace("%post_id%", $wp_id, $wp_showurl); // Stop Permalink Template $wp_posturl = $blog_address . $wp_showurl; echo '<li><a href="'.$wp_posturl.'" title="'.$wp_title.'">'.$wp_title.'</a></li>'; } For this one I want it to echo li class="even" instead of just li for each second result. I think this will have to be changed to a for loop to accomplished this but I am not sure how that is done without breaking it. Exact same for this one: if(is_array($commenters)) { foreach ($commenters as $k) { ?><li><?php if($ns_options["make_links"] == 1) { $url = ns_get_user_url($k->poster_id); if(trim($url) != '') { echo "<a href='" . $url . "'>"; } } if($ns_options["make_links"] == 2) { $url = ns_get_user_profile($k->poster_id); echo "<a href='" . $url . "'>"; } $name = $bbdb->get_var(" SELECT user_login FROM $bbdb->users WHERE ID = $k->poster_id"); echo ns_substr_ellipse($name, $ns_options["name_limit"]); if(trim($url) != '' && $ns_options["make_links"] == 1) { echo "</a>"; } if($ns_options["make_links"] == 2) { echo "</a>"; } if ($ns_options["show_posts"] == 1) { echo " (" . $k->num_posts . ")\n"; } echo $ns_options["end_html"] . "\n"; unset($url); } } else { ?></li><?php } Thanks, Wade

    Read the article

  • Using OpenID as the only authentication method

    - by iconiK
    I have read the other questions and they mostly talk about the security of doing so. That's not entirely my concern, mostly because the website is question is a browser-based game. However, the larger issue is the user - not every user is literate enough to understand OpenID. Sure RPX makes this pretty easy, which is what I'll use, but what if the user does not have an account at Google or Facebook or whatever, or does not trust the system to log in with an existing account? They'd have to get an account at another provide - I'm sure most will know how to do it, let alone be bothered to do it. There is also the problem of how to manage it in the application. A user might want to use multiple identities with a single account, so it's not as simple as username + password to deal with. How do I store the OpenID identities of a user in the database? Using OpenID gives me a benefit too: RPX can provide extensive profile information, so I can just prefill the profile form and ask the user to edit as required. I currently have this: UserID Email ------ --------------- 86000 [email protected] 86001 [email protected] UserOpenID OpenID ---------- ------ 86000 16733 86001 16839 86002 19361 OpenID Provider Identifier ------ -------- ---------------- 16733 Yahoo https:\\me.yahoo.com\bob#d36bd 16839 Yahoo https:\\me.yahoo.com\bigbobby#x75af 19361 Yahoo https:\\me.yahoo.com\alice#c19fd Is that the right way to store OpenID identifiers in the database? How would I match the identifier RPX gave me with one in the database to log in the user (if the identifier is known). So here are concrete questions: How would I make it accessible to users not having an OpenID or not wanting to use one? (security concerns over say, logging in with their Google account for example) How do I store the identifier in the database? (I'm not sure if the tables above are right) What measures do I need to take in order to prevent someone from logging in as another user and happily doing anything with their account? (as I understand RPX sends the identifier via HTTP, so what anyone would have to do is to just somehow grab it then enter it in the "OpenID" field) What else do I need to be aware of when using OpenID?

    Read the article

< Previous Page | 864 865 866 867 868 869 870 871 872 873 874 875  | Next Page >