Search Results

Search found 3405 results on 137 pages for 'ac adapter'.

Page 87/137 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • VMWare Server 2 Install is Failing w/ Error 25032: "failed to customize windows logon process"

    - by Justin Searls
    VMWare Server 2 install question here.* Straightforward question that would probably require a VMWare expert to pull apart, given that Google has been totally worthless on this. On a patched Windows XP machine, any attempt to install VMWare Server 2.0.1 results in failure, just prior to completion (progress bar is full but I can tell network adapter stuff hasn't been fired yet and most of the services haven't been instaled). The error: Error 25032. Failed to customize Windows logon process (). Please contact your administrator. Upon dismissing the error, you're treated to: Warning 25033. Failed to remove Windows logon customization (VMGINA.DLL). Please contact your administrator. Clicking "OK" rolls back your installation. Killing the installer and hoping that it somehow leaves a working install behind was also unproductive. *I hope install troubleshooting isn't outside the purview of serverfault, I'm typically an SO user.

    Read the article

  • Should I enable "Intel NIC DMA Channels"?

    - by javapowered
    I have HP DL360p Gen8 646902-xx1 I'm trying to optimize my config for low latency trading. Should I enable "Intel NIC DMA Channels"? Will that help/affect my system? From HP doc: Added a new ROM Based Setup Utility (RBSU) Advanced Performance Option menu that allows the user to enable Intel NIC DMA Channels (IOAT). This option is disabled by default. When enabled, certain networking devices may see an improvement in performance by utilizing Intel's DMA engine to offload network activity. Please consult documentation from the network adapter to determine if this feature is supported.

    Read the article

  • MS Windows Server 2008R2 slow file copy, slow network connection

    - by MattrixHax
    i just setup a windows 2008R2 standard server, with the only installed app being Hyper-V, and only 1 windows XP VM is running. Whenever i try to copy a file from my windows 7 laptop over to the 2008R2 server machine's admin shares ( \\servername\c$ ) the files start transferring around 60mb/s and then drop to around 5mb/s. My windows 7 machine and the server 2008 machine are both in WORKGROUP (no domain here). when i try the same transfer to our server 2003 box the transfer speeds are fine. tried disabling autotuning (netsh interface tcp set global autotuninglevel=disabled) as well as turning off the checksum offload to the adapter (tx and rx) - i still see strange packet errors (bad header checksum) using wireshark and just cannot seem to track down what the issue is - over 1 hour to transfer 4gb of files from 1 server to another that are on the same GB switch is just crazy.... any ideas would be greatly appreciated!

    Read the article

  • RAID 5 RECONSTRUCT with RAID Reconstructor

    - by user22914
    I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software called "GetDataBack" from here http://www.runtime.org/data-recovery-software.htm but the problem that not all data recovered, I am still looking for importants data with about 5 GB size. I have another software called "RAID Reconstructor" from "http://www.runtime.org/raid.htm" I thought if I run it to reconstruct that will help to recover more data and put the third drive to be Online but I am afraid that might erase the current data in the other drives. Please I need your advise in how I could retrive the remaining data? Thanks

    Read the article

  • Problem with apache + ssl: length mismatch error and ocasional bad request

    - by Ruben Garat
    we migrated a server from slicehost to linode recently, we copied the config from one server to the other. Everything works perfectly except that we get: Occasional errors with "Bad Request", this error is not common, you can use it all day and not see it, and the next day it will happen a lot. apart from that, a lot of the time, event though the request works fine we get some errors. using ssldump we get: New TCP connection #1: myip(39831) <-> develserk(443) 1 1 0.2316 (0.2316) C>S SSLv2 compatible client hello Version 3.1 cipher suites Unknown value 0x39 Unknown value 0x38 Unknown value 0x35 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA SSL2_CK_3DES Unknown value 0x33 Unknown value 0x32 Unknown value 0x2f SSL2_CK_RC2 TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 SSL2_CK_RC4 TLS_DHE_RSA_WITH_DES_CBC_SHA TLS_DHE_DSS_WITH_DES_CBC_SHA TLS_RSA_WITH_DES_CBC_SHA SSL2_CK_DES TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5 SSL2_CK_RC2_EXPORT40 TLS_RSA_EXPORT_WITH_RC4_40_MD5 SSL2_CK_RC4_EXPORT40 1 2 0.2429 (0.0112) S>C Handshake ServerHello Version 3.1 session_id[32]= 9a 1e ae c4 5f df 99 47 97 40 42 71 97 eb b9 14 96 2d 11 ac c0 00 15 67 4e f3 7d 65 4e c4 30 e9 cipherSuite Unknown value 0x39 compressionMethod NULL 1 3 0.2429 (0.0000) S>C Handshake Certificate 1 4 0.2429 (0.0000) S>C Handshake ServerKeyExchange 1 5 0.2429 (0.0000) S>C Handshake ServerHelloDone 1 6 0.4965 (0.2536) C>S Handshake ClientKeyExchange 1 7 0.4965 (0.0000) C>S ChangeCipherSpec 1 8 0.4965 (0.0000) C>S Handshake 1 9 0.5040 (0.0075) S>C ChangeCipherSpec 1 10 0.5040 (0.0000) S>C Handshake ERROR: Length mismatch from the apache error.log [Fri Aug 27 14:50:05 2010] [debug] ssl_engine_io.c(1892): OpenSSL: I/O error, 5 bytes expected to read on BIO#b80c1e70 [mem: b8100918] the server is ubuntu 10.04.1 the apache version is 2.2.14-5ubuntu8 the openssl version is 0.9.8k-7ubuntu8

    Read the article

  • SSL23_WRITE:ssl handshake failure:s23_lib.c:177

    - by Armin
    When attempting to connect to an xmpp server over SSL, openssl fails with the following error: 3071833836:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177 I believe that the server uses the RC4-MD5 cipher, here is the full output: [root@localhost ~]# openssl s_client -connect 184.106.52.124:5222 -cipher RC4-MD5 CONNECTED(00000003) >>> SSL 2.0 [length 0032], CLIENT-HELLO 01 03 03 00 09 00 00 00 20 00 00 04 01 00 80 00 00 ff b0 c9 c2 3f 0b 0e 98 df b4 dc fe b7 e8 8f 17 9a 34 b5 9b 17 1b 2b ac 01 dc bd 2b a9 2d 18 44 0c 3071866604:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 0 bytes and written 52 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE --- Using gnutls-cli: [root@localhost ~]# gnutls-cli 184.106.52.124 -p 5222 Resolving '184.106.52.124'... Connecting to '184.106.52.124:5222'... *** Fatal error: A TLS packet with unexpected length was received. *** Handshake has failed GNUTLS ERROR: A TLS packet with unexpected length was received. Connecting to the same server on port 5223 works fine. Using OpenSSL 1.0.1e-fips on CentOS 6.5 and OpenSSL 1.0.1f on Ubuntu 14.04.1 Any tips on how to troubleshoot this? Thanks in advance.

    Read the article

  • Ubuntu 11.04 VM shows a black screen in VMware Player

    - by Roel Veldhuizen
    I have a Ubuntu Server 11.04 64 bit VM running on VMware Player 3.1.4 that only shows a black screen. No matter what I try, the screen remains black. The VM has worked the first time. When I reset the machine, it shows the VMware loader and a flickering _ for about a second. Then the screen turns black again. VM settings: Memory: 512MB Processors: 1 HD: 20GB CD: auto detect Floppy: auto detect Network adapter: NAT USB controller: present soundcard: auto detect printer: present display: auto detect I just created a fresh VM and the same happens, so it seems that the problem is consistent.

    Read the article

  • XRDP errors when trying to use sesman-x11rdp

    - by Nicholas
    I've just installed Ubuntu 11.10 Desktop on an old laptop of mine and I wanted to set it up so I could remote into it from my windows desktop. I've installed XRDP, but when I attempt to login using sesman-x11rdp it logs in, then the window shuts down. I've checked over the logs and here is what I get at the time of login: [20120123-16:49:23] [INFO ] scp thread on sck 8 started successfully [20120123-16:49:23] [INFO ] granted TS access to user nicholas [20120123-16:49:24] [INFO ] starting X11rdp session... [20120123-16:49:24] [CORE ] error starting X server - user nicholas - pid 3869 [20120123-16:49:24] [DEBUG] errno: 2, description: No such file or directory [20120123-16:49:24] [DEBUG] execve parameter list: 11 [20120123-16:49:24] [DEBUG] argv[0] = X11rdp [20120123-16:49:24] [DEBUG] argv[1] = :11 [20120123-16:49:24] [DEBUG] argv[2] = -geometry [20120123-16:49:24] [DEBUG] argv[3] = 1280x720 [20120123-16:49:24] [DEBUG] argv[4] = -depth [20120123-16:49:24] [DEBUG] argv[5] = 16 [20120123-16:49:24] [DEBUG] argv[6] = -bs [20120123-16:49:24] [DEBUG] argv[7] = -ac [20120123-16:49:24] [DEBUG] argv[8] = -nolisten [20120123-16:49:24] [DEBUG] argv[9] = tcp [20120123-16:49:25] [DEBUG] argv[10] = (null) [20120123-16:49:34] [ERROR] X server for display 11 startup timeout [20120123-16:49:34] [ERROR] X server for display 11 startup timeout [20120123-16:49:34] [INFO ] starting xrdp-sessvc - xpid=3869 - wmpid=3868 [20120123-16:49:34] [ERROR] another Xserver is already active on display 11 [20120123-16:49:34] [DEBUG] aborting connection... [20120123-16:49:34] [INFO ] session 3867 - user nicholas - terminated Can anyone point me to the proper way to get this working with x11rdp?

    Read the article

  • Getting a VMnet0 error in VMWare workstation after updating host computer from Windows 8 to 8.1

    - by Andrew
    Yesterday, I updated my computer from Windows 8 to 8.1. I have VMWare Workstation 10 running Windows XP on this computer and prior to the update I had no issues connecting to my network. However, since updating, I haven't been able to connect to any network and I'm getting the following error: "The network bridge on device VMnet0 is not running. The firtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet0" I've checked all of my settings which currently have my network adapter set for a bridged connection and under device status "connected" is checked. Not really sure where to go from here, but after doing some research I have seen that others users have reported getting this error when updating the OS (any OS, not windows 8 specifically) of the host computer. Thanks in advance to anyone who can help.

    Read the article

  • Problem using Polar Irda device in Windows Server 2008

    - by AngrySpade
    I'm attempting to use the Polar IrDA device with Windows Server 2008 R2 x64. Although they dont make explicit drivers for it, I figured the Windows 7 x64 drivers would do. http://www.polar.fi/en/support/downloads?product=&category=Software&documenttitle=Polar+IrDA+USB+Adapter+drivers&document=/gip/PKBStoGIP.nsf/web_cat/C225742500419A8AC2257458003D3F40 The device has a yellow warning icon in Device Manager. Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Is there anything I can do about this?

    Read the article

  • Installing esx 3.5 on hpblade 460c G7

    - by stillStudent
    I was trying to install ESX 3.5 on hp blade 460c but it fails with error no 'network adapter is detected'. Anybody has work around for this. I also tried to install ESX 4.1, it also had the same problem but in case of 4.1 there is support to add your custom driver while installing. So I added NIC drivers and installation completed successfully. ESX 3.5 installtion does not support adding custom drivers while installing. I can't use ESX 4.1 because it does not support 'license server' configuration and only asks for license file(key). I do not have license keys, I only have vmware license server. That is the reason I have to be with ESX 3.5.

    Read the article

  • Windows 7 Not Recognizing Any Hardware, Linux Recognizing Hardware

    - by Newb
    I have a new desktop computer with two SSDs: one running Linux Mint 15 (SSD1), the other running Windows 7 (SSD2). My mint runs perfectly - USB wireless adapter is recognized, SSD2 (connected by SATA) is recognized and accessible through the filesystem, Ethernet works, etc. However, my Windows 7 is not recognizing any of these devices - even plugging in a regular ethernet cable doesn't work. It seems that it's not recognizing any network adapters, and it also doesn't recognize SSD1, connected to the mainboard by SATA. I've installed, uninstalled, and reinstalled Windows multiple times, but the problem persists. I used the Windows 7 CD to install Windows on a machine previously, and that time around, I didn't have any problems, which leads me to suspect that this might be a hardware issue, specifically with the mainboard. My mainboard is an MSI-7641 model, the 760GM-P34 FX. It uses an AMD Chipset and an AMD processor. Can anyone suggest what might be wrong, and how to fix it?

    Read the article

  • XenServer 5.6.1-fp1. Can't get network working

    - by bakytn
    I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed)

    Read the article

  • Keep getting invalid IP via WiFi

    - by nmuntz
    There is something wrong with my WiFi. I keep getting an invalid IP via DHCP (169.254.x.x), this happens for ALL wifi connections (home, office, etc). If I try a Local Ethernet connection via cable it works fine. I have tried downloading the latest drivers for my wireless adapter, resetting the TCP Stack and still have this issue. One strange thing I notice is under Device Manager, Network Adapters I have 4 "Unknown Devices" and three "Remote NDIS based Internet Sharing Device". My guess is that this belongs to McAfee. Not sure if this is related or not, anyways to try to fix this I tried downloading the NetLUIDfix.exe utility from McAfee but it didn't work. Any ideas how to solve this annoying issue? Thanks!!

    Read the article

  • ndiswrapper wlan driver installed, but wlan still does not work

    - by mugetsu
    I'm trying to get my Atheros AR1111 EB-WG PCI wireless adapter to work. Right now wifi is not even detected. I'm on ubuntu 12.04 64bit and I managed to find a xp64bit driver. I followed the exact steps here: https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper And where I do ndiswrapper -l I get something like : {name of driver} : driver installed device ({Chipset ID}) present which shows that the driver installed properly However, after I load the new module : sudo modprobe ndiswrapper nothing happens, and iwconfig shows that I still have no wlan. I tried to do dmseg | grep ndiswrapper, but there were no driver loading errors or anything strange. I also have blacklist ath5k, ath8k in /etc/modprobe.d/blacklist.conf What am I doing wrong? What could be causing this?

    Read the article

  • Can't ping host from vmware guest using bridged networking

    - by user199421
    Host is Windows 7 Guest is Ubuntu 11.04 Network adapter is wireless I can ping other computers on the network but not the host. No firewall are involved. Sniffing the traffic with wireshark it looks like both the host and the guest are using the same MAC address. My guest simply doesn't receive a reply when asking for 192.168.1.101 (the host) My router has no problem giving both of them different IP addresses but maybe duplicate MAC address is the problem? It seems logical that both will have the same MAC address (from the host point of view) but it strange that there is no work around for this because otherwise I don't see how the host and guess are supposed to communicate.

    Read the article

  • Sound quality in bluetooth headphones doesn't change to high

    - by Sergiy Byelozyorov
    My Bluetooth headset Philips SHB6610 has several profiles. It can work as low-quality headset (HFP) and high-quality headphones (A2DP). I mean sound quality. Typically whenever I start to play the music in my media player it works in high quality, while if I receive a call on Skype it switches to low-quality. Once call is finished it falls back on high quality again. However, from time to time, it happens that I connect headphones to the computer and they just stay in low-quality mode. I don't know how can I change the profile manually, since it was always done automatically so far. The only thing that helps (but not always) is re-pairing of headphones with PC. I am using Windows 7 on Toshiba Satellite Pro P300-1CG laptop, with Belkin Mini Bluetooth Adapter.

    Read the article

  • Windows Media Center says "Searching for tuners" when I try to play live TV

    - by Louis
    After upgrading from Windows 8 Pro with Media Center to the 8.1 preview, I need some help in being able to watch live TV again. When I try to now, it says Please Wait. Searching for tuners. I tried reinstalling the software for the Hauppauge WinTV DCR-2650 TV tuner, and upgrading the firmware for both the tuner and the Cisco STA-1520 tuning adapter. I also tried swapping around the USB ports, cold-booting the devices, and running the Set Up TV Signal setting in WMC, but that says The TV signal cannot be configured because a TV tuner was not detected. Both devices look fine in Device Manager, reporting the "This device is working properly" status. I'm not sure if this is related, but I did have some network connectivity issues immediately after upgrading to Windows 8.1 where my either my subnet mask or default gateway was missing, and since the TV tuner shows up as a network device, I wonder if that might be related. However, I really don't know how those settings should look and Hyper-V sort of further complicates things with the virtual Ethernet adapters:

    Read the article

  • windows 7 no internet access

    - by Kyle
    Just did a fresh install of Windows 7, and the network and sharing center says no internet access. Disabling and enabling the adapter seems to fix the issue temporarily, but the internet stops working shortly after. I have installed the latest NIC drivers and have installed all Windows updates. I have also tried manually setting the ip/gateway/dns and running netsh int ip reset in an elevated command prompt. I am running Windows 7 Home Premium 64bit with a wired connection. I have searched for hours, but have found no working solutions. Does anyone have any ideas?

    Read the article

  • how to program a special key on my laptop?

    - by daniel11
    ok so i have a set of touch screen buttons on the top of my laptop's keyboard, (one turns on power save mode, one disables/enables the mouse touch pad, one toggles the wifi adapter, and two turns the volume up/down) however theres another one that opened a file backup utility that came with my laptop. but since i bought my laptop , ive uninstalled that utility, rendering this button useless. So i was wondering if it was possible to reprogram that button to open another file or program on my computer? And if so what are the requirements and how would i go about doing it? Thanks in advance!

    Read the article

  • Cachefilesd (cachefiles) everything seems to be set up, still not working

    - by Evgenius
    I'm trying to set up cachefilesd to work with my network folder shared using NFS. I have seemingly everything set up, however cachefilesd starts normally, however caching isn't functioning. Here is output of commands, which I ran in the same order 1 sudo mount ... cache-1:/mnt/datashared on /mnt/nfsshare type nfs (rw,sync,ac,acregmin=3,acregmax=60,acdirmin=30,acdirmax=300,lookupcache=pos,vers=3,fsc) ... 2 lsbmod | grep cachefiles cachefiles 40555 1 fscache 57430 4 nfs,cifs,cachefiles,nfsv4 3 [edited - deleted] 4 uname -r 3.8.0-34-generic 5 grep CONFIG_NFS_FSCACHE /boot/config-3.8.0-34-generic CONFIG_NFS_FSCACHE=y 6 lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.04 Release: 13.04 Codename: raring 7 sudo service cachefilesd restart * Restarting FilesCache daemon cachefilesd [ OK ] 8 dmesg [6211206.141781] FS-Cache: Withdrawing cache "mycache" [6211210.135236] FS-Cache: Cache "mycache" added (type cachefiles) [6211210.135242] CacheFiles: File cache on sdb1 registered [6214644.348929] CacheFiles: File cache on sdb1 unregistering [6214644.348935] FS-Cache: Withdrawing cache "mycache" [6214654.575909] FS-Cache: Cache "mycache" added (type cachefiles) [6214654.575915] CacheFiles: File cache on sdb1 registered 9 ps aux | grep cachefilesd root 65399 0.0 0.0 4460 540 ? Ss 23:14 0:00 /sbin/cachefilesd 1000 65464 0.0 0.0 8160 916 pts/0 S+ 23:16 0:00 grep --color=auto cachefilesd finally, biggest problem is 10 cat /proc/fs/nfsfs/volumes NV SERVER PORT DEV FSID FSC v3 64476645 801 0:24 233e020f0da07a93 no tl;dr I think I configured everything properly but FSC mount option + fscachefilesd don't seem to work

    Read the article

  • Accessing apache in ubuntu 10 virtualbox guest from ubuntu 10 host

    - by Francis L
    I did the following: installed VirtualBox 3.1.6 OSE in ubuntu 10 desktop. installed ubuntu 10 server on a virtual machine in VirtualBox. select "LAMP server" and "OpenSSH server" options during the ubuntu server installation. leave network "adapter 1" of virtual machine as "NAT". use "VBoxManage" described in manual to setup port forwarding on the host (Protocol: TCP, GuestPort: 80, HostPort: 8080). verify "ExtraDataItem" have been added to "ubuntuServer1.xml" (my virtual machine name) correctly. run command "pgrep apache" in ubuntu server in virtual machine to ensure apache is running. Everything went well. But, when I try to access the apache from the browser on the host with "http://localhost:8080/", it just continue fetching with no response. Now, I'm struck! Please help! Many many thanks in advance!

    Read the article

  • Dedicated NIC or dedicated port for iSCSI?

    - by Newt
    When spec'ing and configuring a machine that will utilise shared iSCSI storage, I've read a lot of documentation which suggests a dedicated network adapter should be used for iSCSI communication. That makes a lot of sense and I have no problem with it. The question I do have, is this - should that suggestion be taken to mean that a separate physical NIC should be used, or will a dedicated port/ports on a dual/quad port NIC be just as good? My suspicion is that simply using dedicated port(s) on a shared NIC would be just as good. Any input greatly appreciated.

    Read the article

  • DNS and DHCP not agreeing on an IP address

    - by Mr. Jefferson
    I'm having a problem where our Windows Server 2003 domain controller assigns my Windows 7 computer one IP address (x.x.x.75) via DHCP, but reports another (x.x.x.84) via DNS. This causes some interesting behavior on the network. If I change my adapter settings to get IP and DNS addresses from DHCP, I can access the internet, but no one on our network can access my computer. If I change my IP manually to what DNS says it is, I lose my internet access, but everyone can get to my computer again. I know that we have some old, invalid reverse DNS pointers hanging around (a reverse lookup on an IP address often gives more than one result, usually not including the one that is correct), so that could be contributing, but my problem is recent, and the invalid reverse pointers have been around a long time. What's going on, and how do I fix it?

    Read the article

  • Windows 8.1 killed notebook's wifi

    - by char1es
    Was running Windows 8 on a Lenovo G780 and updated to windows 8.1 Wifi does not work anymore, i always receive a dns server not responding error. I have tried using public dns servers from Google but with still no results. I've restarted my router with no results. All other devices on my network are having no trouble at all. I've tried updating the wireless driver but the manufacturers website claims that the Win8.1 driver should be updated with the update from windows. So i cant find a wireless driver... Anyone else having this error and does anyone have any ideas on how to fix it?? EDIT: here are the driver details: Broadcom 802.11n Network Adapter Provider: Microsoft Driver Date: 2013-05-31 Driver Version: 6.30.223.102 Digital Signer: Microsoft Windows Thanks

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >