Search Results

Search found 2589 results on 104 pages for 'dell r710'.

Page 87/104 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• Fix for poor hd playback for 11.04 upwards

  - by mark kirby

  Hi guys ive seen loads of posts on this site about poor 720/1080p playback in recent ubuntu versions I had this problem and fixed it so I thought id share it with everyone.... 1 install mplayer 2 install smplayer frontend {in software center} 3 open smplayer 4 go to "OPTIONS" then "PREFRENCES" then "GENRAL" 5 if you have a nvidia card choose "OUTPUT DRIVER" and select "VDPAU" {for ATI or AMD choose xv (0 - ATI Radeon AVIVO video) I dont know if this will work as my card is nvidia but it should) 6 go to performance on the left hand side and set both local and streaming cache to 99999 (this may also fix dvd playback if you set that cache aswell} 7 check the box for "ALLOW HARD FRAME DROP" and set "LOOP FILTER" to skip only on HD 8 Set the "THREDS FOR DECODING OPTION TO THE NUMBER OF CORES YOUR CPU HAS IF YOU HAVE MORE THAN ONE CPU ADD UP ALL THE CORES FOR BEST PERFORMANCE" 9 Enjoy you HD movies again on ubuntu...... I have a pretty avrage machine heres my spec.... 2x Pentium 4 ht 3 ghz Stock dell power and motherboard GFORCE 310 HDMI 24 inch full HD tv as a monitor so any one with dule core cpu should have no problems getting this to work. hope this helps someone out.

  Read the article

• "The daemon is being inhibited" error message when mounting volumes on a partitioned external HD [closed]

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• Colored Vertical Lines upon boot and nomodeset DOES NOT fix it

  - by user2851032

  I have installed Lubuntu 13.04 on a Dell Inspiron 1501 laptop, rebooted the machine and encountered this problem. I edited the GRUB configuration to remove "quite splash" and enter "nomodeset", updated grub, and everything was fine. I could reboot the machine without any trouble. However, if I unplug the machine, wait a few seconds, and plug it back in, the problem with the colored lines comes back and nomodeset no longer helps to solve the problem. I tried using radeon.modeset=0 instead of nomodeset and that also works on multiple reboots until I unplug the machine and plug it back in. I was finally able to get around the problem by entering "radeon.exapixmaps=0" instead of radeon.modeset=0. I suppose I kind of made up that boot option using some information from an Arch Wiki page. This would work throughout reboots and even if I unplugged the laptop. It was working fine for quite a while. A few weeks later, I had some unrelated issues with the Java iced-tea plugin, and since 13.10 had just come out, I thought I would try upgrading. So upgrading didn't fix the problem with Java, and after unplugging the machine and trying to use it later, I was back to this problem with the black screen and colored vertical lines. I am completely out of ideas on what to try. It took me a week to figure out how to get it working the first time, but the solution I had isn't working anymore.

  Read the article

• Botting from a stick drive

  - by Zap

  Am trying to boot from a usb stick. Have carefully followed the instructions at the following link and successfully downloaded and installed version Ubuntu 12.04 desk top: http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows I used the Universal-USB-Installer-1.9.0.2 as instructed and choose the "Ubuntu 12.04 desk top" option, after downloading the respective iso/zip file onto my Dell laptop from the Ubuntu site. Also modified my bios to select the usb first as boot drive instead of hard drive. Also, turned off bit blocker on my laptop and usb stick. Usb stick has the setting of "Automatically unlock this drive on this computer". When i reboot my laptop, it first boots into a black screen (i assume is the bios), but prompts saying "Remove disks or other media. Press any key to start". I press any key and regardless the laptop boots up to windows. Hence, it appears that the boot process is checking the USB first before going to the hard drive to look for it's boot disk and starting Windows 7. Is it that the USB stick is not correctly configured with Ubuntu as a boot disk? Is there anything else that i need to do besides the instructions at the following link? http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows How can I ensure that USB boot stick is configured correctly? After running the Universal-USB-Installer-1.9.0.2 to "install" Ubuntu, is there additional configuration/installation steps? What is the first file that the bios would look for on this USB drive? Is this configured somewhere in the bios, or would it just look for an grub file or /boot dir? The only message i get when booting is "Remove disks or other media. Press any key to start". Any and all help would be much appreciated.. Thanks ... :)

  Read the article

• How do I disable touchpad tap to click?

  - by AWE

  You've heard this a million times but the "tap to click" is a pain in the behind and I want to disable it. There is no touchpad in gpointing-device-settings and neither in mouse and touchpad in system settings. I've tried some commands in terminal but it's all crap. Dconf-editor doesn't react. How about solving this once and for all? xinput list: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys id=14 [slave keyboard (3)]

  Read the article

• Lost WiFi after 12.10 upgrade

  - by Steven Guillory

  I received my new Dell Vostro 2420 last week, and just got around to upgrading from 11.10 to 12.10. Unfortunately, like many others (after researching the issue), I no longer have WiFi. I have tried every sudo command given that worked for others, and still can't get my wireless to function. I am new to Linux, so any and all help is appreciated. Thanks in advance! Edit: I can connect via ethernet, just not via wifi. As a matter of fact, when I use Fn + F2 to turn on wifi, only my bluetooth comes on. lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) This is what I am getting... dpkg: error: --install needs at least one package archive file argument Type dpkg --help for help about installing and deinstalling packages [*]; Use dselect or aptitude for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through less or more !

  Read the article

• Help setting up wireless in Ubuntu 13.04

  - by James

  I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

  Read the article

• recent unreliable wireless connection with Netgear KWGR614 router

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I know that this router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. Is it possible that someone is jamming my signal ?

  Read the article

• Ubuntu 12.04 server froze during the first boot after it was installed.

  - by user69021

  I installed Ubuntu server 12.04 to my new server and it failed on the first boot. It just stopped and I can't proceed any further. Server's specifications: Dell PowerEdge T620 CPU : Xeon E5-2665 2.4G x 2 RAM : 8GB RDIMM, 1333MHz x 12 HDD : 3TB Near Line SAS 7.2K x 8 RAID controller : PERC H710 GPU : NVIDIA Tesla C2075 x 4 I have a screenshot of the screen it stopped on but I cannot attach it because my privilege level is currently too low. ![freeze on boot][1] Here are the last messages while booting. [5.048743] Freeing unused kernel memory : 920k freed [5.049046] Write protecting the kernel read-only data : 12288k [5.052973] Freeing unused kernel memory : 1608k freed [5.056132] Freeing unused kernel memory : 1196k freed Loading, please wait... [5.070236] udevd[218]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [5.089030] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 [5.089518] megasas: 0x1000:0x005b:0x1028:0x1f35: bus 1:slot 0:func 0 [5.089739] megaraid_sas 0000:01:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [5.089937] megasas: FW now in Ready state [5.090427] dca service started, version 1.12.1 [5.091463] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k [5.091578] Copyright (c) 2007-2011 Intel Corporation. [5.091712] igb 0000:06:00.0: PCI INT A -> GSI 16 (level,low) -> IRQ 16 [5.111090] megasas:IOC Init cmd success [5.123124] usb 1-1:new high-speed USB device number 2 using ehci_hcd What can I do about this?

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• ATI Radeon 5800 series dual monitor unity not 3D accelerated

  - by Victor S

  When I had a single monitor setup, without Xinerama, with my current setup of Ubuntu 11.10, ATI 5800 series card, Unity showed transparencies, shadows, etc. (although graphics was reported as 'Standard' in the control/settings panel). Having switched to a dual monitor setup, dell 24" UltraSharp and a smaller Acer monitor, Unity shows only as 2d, even though I'm not loggin in to that display manager. WebGL performance is very sluggish, I'm getting the impression that the processor is doing all the work and the card isn't even accessible even though the drivers are installed (from the ubuntu repository, I did not compile custom drivers). Any tips on how to enable full 3D accelerationn and video card support. Here is my xorg.conf file: Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-DFP4" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1200" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-0" Device "amdcccle-Device[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-1" Device "amdcccle-Device[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[1]-0" 0 0 Screen "amdcccle-Screen[1]-1" 1920 0 EndSection Section "Device" Identifier "amdcccle-Device[1]-0" Driver "fglrx" Option "Monitor-DFP4" "0-DFP4" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "amdcccle-Device[1]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:1:0:0" Screen 1 EndSection Section "ServerFlags" Option "Xinerama" "on" EndSection More info: fglrxinfo display: :0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5800 Series OpenGL version string: 4.1.11005 Compatibility Profile Context

  Read the article

• Ubuntu 12.04 using b43-fwcutter

  - by Nathan

  I have used 10.04 with the b43-fwcutter driver to drive my BCM4318 Broadcom card (a Linksys WPC54G v3) on my old Dell Inspiron 8100 for two years+ with no troubles. I just upgraded to 12.04 and although everything worked fine after install, before I added the b43-fwcutter driver, once I installed the driver, the system refuses to boot. Even before I install the Linksys card!! It just hangs on boot with graphical garbage on the screen. I tried several attempts to recover the system using the live CD, and finally reinstalled completely. I have been thru the cycle, install fresh system, verify everything works, then install b43-fwcutter and it is hung, several times. Consistent hard fail. The system runs fine on hardwire Ethernet, and wireless was fine on 10.04. But I cannot get there with 12.04. So after several attempts, I am now ready to admit defeat and ask for help. I have read every thread that search turned up, and either the advice is to do what I did, i.e. install fwcutter, or does not apply (Different Broadcom, STA, legacy, whatever) So what do I need to do to fix it? Or is the B43-fwcutter driver broken for 12.04? Thoughts? Tips? Log files needed??

  Read the article

• Hibernation to a swap file 12.04, fragfile output

  - by MrHug10

  I've been trying for some time now, to get hibernation working in Ubuntu 12.04 on my Dell XPS17. I dualboot Windows 7 and Ubuntu, each having their own partition and one shared partition for all my data and documents. As I would like to be able to swtich from ubuntu to windows without losing all the things I was currently doing in Ubuntu, I would like to be able to use hibernation. In order to achieve this I've followed the information at http://ubuntuforums.org/showthread.php?t=1042946. Only instead of creating my swap file on my linux partition (which is formatted: ext4), I've chosen to create one on my shared partition (which is formatted: ntfs). There is a problem with this though (at least, that's what I think the problem is), because when I call: sudo filefrag -v /media/data/Ubuntu_Swap_Space/6GiB.swap, I get the following output: Filesystem type is: 65735546 File size of /media/Data/Ubuntu_Swap_Space/6GiB.swap is 6442450944 (1572864 blocks, blocksize 4096) Discontinuity: Block 22 is at 25829097 (was 232498) /media/Data/Ubuntu_Swap_Space/6GiB.swap: 2 extents found So I'm not sure what I need to fill in as an offset to follow the rest of the earlier mentioned information. I've tried both the location of block 22 and the number that is listed after that, but when I then try sudo pm-hibernate nothing happens and this shows up in my /var/log/pm-suspend.log s2disk: Could not use the resume device (try swapon -a). Reason: No such device Hope someone can help me out with this! If you need more information about anything, please let me know!

  Read the article

• How to Turn Your Home Ubuntu PC Into a LAMP Web Server

  - by YatriTrivedi

  Got a Linux PC you want to put to work? Maybe you’re not comfortable with the command-line only version of Ubuntu Server Edition. Here’s how to keep the standard Ubuntu desktop and add web-serving capabilities to it. Whether you’re not comfortable with a command-line only system, you’re using your Ubuntu desktop for other things, or you just need it installed for a few particular apps, you can add Apache, MySQL, and PHP to any standard desktop installation of Ubuntu very quickly and easily Latest Features How-To Geek ETC How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin The How-To Geek Video Guide to Using Windows 7 Speech Recognition Stylebot Customizes Web Pages in Chrome, Now Has Downloadable Styles Blackberry, Dell, Apple, and Motorola Tablets Compared [Infographic] Encrypt Your Google Search Queries Vintage Posters Showcase the History of Tech Advertising Google Cloud Print Extension Lets You Print Doc/PDF/Txt Files from Web Sites Hack a $10 Flashlight into an Ultra-bright Premium One

  Read the article

• How do I debug an overheating problem?

  - by Tab

  Hello guys. I have a problem with my Laptop (Dell Inspiron 1564 Core i5 4GB Ram VGA ATI Mobility Radeon HD 4300 running Ubuntu 10.10 32bit). It shuts down abruptly without even a lag in the application I am working with before shutdown. I think it's overheating problem. Actually the laptop is hot all the time when I am running Ubuntu. When I switch back to windows, even with intense load it won't shutdown or show any problem as long as I keep proper ventilation (when the air openings are blocked it does the same). Actually on Ubuntu i don't usually do things that need much CPU power, usually surfing internet, coding web pages and sometimes playing with python and ruby. I am not enabling desktop effects so no GPU load except the normal GNOME gui. Now as I am writing the Processor load in the panel monitor applet is 0%, Memory 11% by programs, 22% by cache. And i have CPU Frequency monitor for each of the 4 cores set to 1.20 Ghz (the lowest possible value, i am not sure if this applet does really limit CPU usage). Running sensors in terminal gave me temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) hddtemp /dev/sda at the terminal gave me /dev/sda: WDC WD3200BEVT-75ZCT2: 46°C All that fine but the laptop is Really hot i can feel it in the keyboard, mouse pad is painful to touch, and the fan is always spinning. I am also placing 2 small fans running on USB under the laptop right now and the laptop is lifted over the fans so it's well ventilated. When I am running windows it doesn't get that hot except when there is a really big load on the CPU and this is keeping me away from using Linux for everyday tasks. Actually I don't care much for speed as I can deal with low speed it's not going to shutdown abruptly. So please if you can help me and tell me what are the possible causes, where should I start ?

  Read the article

• Ubuntu crashes with menu bar launcher freeze during software centre use

  - by UbunUser

  I recently reinstalled Ubuntu 12.04 LTS on a Dell Studio 1588 64-bit and ran into crashes as I was installing some software on the software centre. Before this, I had display/screen problems that I needed to fix so I will briefly describe that in case it has any connection to the crashes. The problem was of screen crash/flickering (related to ATI Mobility Radeon HD 5400x) when trying to adjust brightness and so I followed guidance from an earlier chain (question 131967) to (a) use jockey to install fglrx update driver (deactivate experimental beta driver) and (b) edit grub to add acpi_backlight=vendor dell_laptop.backlight=0 The crashes that happened (twice, while software centre was just finishing installation in the background) was that all tabs (on open Firefox window) stayed open along with cursor control with mousepad but all menu bars disappeared completely along with the launcher and the keyboard also turned unresponsive. So there seemed to be no way to close windows or shut down the computer except for a forced hard shut down of the system using the start button. This is very similar to Questions #167540 and #298843, which seem to be closed. Why is this happening? Is there some update or fix I need to make? Thanks!

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

• recent unreliable wireless connection

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

  Read the article

• Lubuntu customized cdrom installation crashes

  - by SBarve

  I have created customized live cd of lubuntu and it is customized using uck. After burning the CDROM and using the cdrom for installation of same CD the installation works fine on HP desktop but it fails on Dell desktop. Here is the error. Can someone help to sort out this error. We are sorry; the installer crashed. After you close this window, we will allow you to file a bug report using the integrated bug reporting tool. This will gather information about your system and your installation process. The details will be sent to our bug tracker and a developer will attend to the problem as soon as possible. Traceback (most recent call last): File "/usr/lib/ubiquity/plugins/ubi-timezone.py", line 173, in geoname-cb for result in json.loads (message.response_body.data): File "/usr/lib/python2.7/json/_init_.py", line 326, in loads return_default_decoder.decode(s) File "/usr/lib/python2.7/json/decoder.py", line 366, in decode obj, end=self.raw_decode(S, idx=_w(S,0).end ()) File "/usr/lib/python2.7/json/decoder.py", line 384, in raw_decode raise ValueError ("No JSON object could be decoded") ValueError: No JSON object could be decoded.

  Read the article

• How do I fix the HDMI/DVI display output with Intel HD 4000 Graphics in 12.04?

  - by YumYumYum

  I have an Alienware Dell PC with Intel HD 4000 Graphics (Ivy Bridge) as verified by the output of lspci | grep VGA posted below. 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) The PC only has HDMI and DVI display outputs and using the HDMI output I am only being offered abnormal resolutions. As you can see below it does not even list HDMI1 or DVI1 but just only a fallback. $ export DISPLAY=:0.0 && xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1360 x 768, maximum 1360 x 768 default connected 1360x768+0+0 0mm x 0mm 1360x768 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 How can I fix this? Does it just need to be configured differently or will I need to use a newer kernel (as Intel Graphics drivers are included in the kernel)? Follow up: kernel to latest Step 1: Go to: http://kernel.ubuntu.com/~kernel-ppa/mainline/ Go to last: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/ Download: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3_3.6.0-030600rc3.201208221735_all.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-extra-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb Step 2: sudo dpkg -i linux*.deb Step 3: reboot which shows that i have Ubuntu 12.04 with latest $ uname -a Linux sun-Alienware-X51 3.6.0-030600rc3-generic #201208221735 SMP Wed Aug 22 21:36:32 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux But still same problem remain.

  Read the article

• Latest update to Ubuntu 13.10 broke Intel graphics drivers

  - by James Davies

  I'm running a copy of Ubuntu 13.10 on an i7-4771 w/ Intel HD4600 Graphics using a Dell Ultrasharp 1440p monitor via Displayport. Up until today this configuration has been working perfectly, however the latest update appears to have broken my graphics configuration, and xorg is now refusing to go above 1280p resolution. Running xrandr it appears the driver incorrectly thinks my monitor is plugged into the HDMI port and is detecting a max resolution of 1920x1200 instead of 2560x1440. (It's actually plugged in via Displayport). Based on the apt history.log, the latest update was for the kernel. I'm presuming the issue is that the official Intel driver hasn't been updated to support this version? Is there any way to resolve this, or will I need to upgrade to 14.10 to get the latest driver from Intel? Start-Date: 2014-05-28 11:30:57 Commandline: aptdaemon role='role-commit-packages' sender=':1.473' Install: linux-image-extra-3.11.0-22-generic:amd64 (3.11.0-22.38), linux-image-3.11.0-22-generic:amd64 (3.11.0-22.38), linux-headers-3.11.0-22:amd64 (3.11.0-22.38), linux-headers-3.11.0-22-generic:amd64 (3.11.0-22.38)

  Read the article

• Install Ubuntu in UEFI mode (unable to boot from USB)

  - by Adele

  I recently bought a Dell Inspiron 15R SE with Windows 8 (64 bit) pre-installed (UEFI supported). I want to install Ubuntu in dual boot with Windows 8. I tried to follow all instruction here : https://help.ubuntu.com/community/UEFI And here : Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) So, I set Secure Boot to "off" into BIOS and I disable Fast Startup as described here : http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html I created a bootable USB key for Ubuntu (Ubuntu 13.10 64bits international Edition) with Unetbootin. The problem is I am unable to boot from the USB key. The computer tries to boot into infinite loop. I also tried to boot from USB with "Legacy Boot" option instead of UEFI. In this case, the computer says there are no bootable devices. Of course, I tried to boot from my USB key on an other computer having normal BIOS and it works perfectly. Have you ideas about what I need to do to be able to boot from USB ? Thanks in advance for your help, Adele

  Read the article

• Second Monitor Detected, but not receiving a signal after upgrading to 12.04

  - by user62458

  After I upgraded to 12.04, my second monitor is detected (in display settings), but will not power on. I have scoured the Internet and forums for a solution and I can't find anything. I have found a couple people with the same problem, but never a solution for it. I am no expert, but I'm certainly not a noob. My computer uses AMD Radeon 6250 graphics, but I do NOT want to use the proprietary graphics drivers. They refuse to work properly with my second monitor (they ATI drivers will only mirror screens, and I've done everything to try to fix it, and I DON't want mirrored screens) Not to mention that the default open-source video drivers seem to work much better than the proprietary anyway! Again, Ubuntu's default video drivers work fine, and they even DETECT the second monitor (Dell 19'). I can drag stuff off the screen and put it on the 'space' of the second monitor and even a screen-shot shows that there are two monitors active; but the monitor is OFF. It will not power on. It goes into 'power-save' mode because it is not receiving a signal. For some reason it is not getting the signal to power on, even though Ubuntu thinks the monitor is working properly. I had this working fine on my Sony VAIO yesterday (with Radeon graphics/default Ubuntu video drivers). I upgraded to a Samsung Series 3 and now I have this issue. I can't for the life of me figure out why the monitor is connected, detected and I have screen space for the monitor, but the screen won't turn on! XRANDR Output: Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 VGA-0 connected (normal left inverted right x axis y axis) 1440x900 59.9 + 75.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 60.1*+ 1280x720 59.9 1152x768 59.8 1024x768 59.9 800x600 59.9 848x480 59.7 720x480 59.7 640x480 59.4 HDMI-0 disconnected (normal left inverted right x axis y axis)

  Read the article

• Ubuntu on Samsung NP700Z5B - no Grub

  - by copolii

  I just bought a Samsung NP700Z5B laptop. Gorgeous machine and great performance! I do 2 things when I get a new laptop: Format the HD and install Winblows from a CD to ditch the bloatware Install some variant of Linux on it (lately Ubuntu) Step 1 worked fine (until earlier today), but I haven't been able to install Ubuntu on it for the past 3 days! I've tried Mint12, Ubuntu 12.04, Ubuntu 11.10, Ubuntu 11.04 and Ubuntu 10.04. The live CD and the installations all run fine and report no problems, but when I reboot grub is nowhere to be found! The system goes directly to Winblows! I've tried booting from the liveCD and re-installing grub via the chroot and purge & reinstall methods (https://help.ubuntu.com/community/Grub2) and neither makes a difference. I've also tried copying the boot sector: dd if=/dev/sda of=linux.bin bs=512 count=1 and putting it on c: then setting bcdedit to add the entry to the Windows bootloader with no results. Earlier today I decided to try and set my boot partition as an EFI boot partition ... bad choice, now I don't even have the Winblows boot loader. I've officially ran out of ideas. Tried calling Samsung, but they're closed (they'd probably say something stupid along the lines of "Samsung recommends Windows 7" ... I've had Dell say that to me). Any help would be greatly appreciated. Update 1 Tried re-installing 12.04 and now I get the screen continously turning off and back on, but still no sign of booting ... it has been doing it for 15 mins so far (I set the boot partition type to ext2 instead of ext4) Update 2 Well ... this just gets better and better. I inserted the installation USB key to reboot it and the flickering stopped for about a minute (remained on) then it started turning off and on again

  Read the article

• Ubuntu 11.10 loads from live usb fine, but boots to black screen from harddrive. Why?

  - by Estel

  A few days ago I had a hard drive failure, which was running Windows XP (32-bit) just fine. The second hard drive in my computer held a few unimportant files, so I formatted it in the Ubuntu setup and installed 11.10 without a hitch. I had been using it for about a week, but decided to install Windows 7 (64-bit) in order to utilize Networking with my home server (running Windows Server 2000). My system is 64-bit based, and thus I had no problems installing other than a basic RAM error that required me to remove my RAM down to a single stick. I played with the settings in Windows 7 for around an hour before I shut down. After reinstalling the RAM, Windows 7 would not boot. In this, I then assumed that something about my system was rejecting Win7 and I reinstalled Ubuntu. However, now Ubuntu (11.10) boots into black screen, and I've already attempted activating the grub menu with the shift key, and following steps listed here: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen but nothing seems to work. I've reinstalled twice now, with the same result each time. Now, the very odd part about this whole scenario is that the USB I installed from has no problems booting as a live USB. This puzzles me greatly, because the hard drive boots straight to black screen and the live USB loads normally. At this point, my only theory is that the boot sector of the hard disk was somehow corrupted with Win7, and that Ubuntu was unable to completely write through. I used Darik's Boot n Nuke to wipe the drive, but was met with an error, this also puzzles me because the hard disk has no promblems reading or writing. Any suggestions/comments are appreciated. If you have a theory, I will be more than happy to oblige. Additional information: Intel Core2 Duo e6400 2.13GHz nVidia GeForce 7-series (7900 GS) 4 GB DDR2 333MHz (2x 2GB) Dell XPS 410 BIOS Revision 2.5.3

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >