Search Results

Search found 23700 results on 948 pages for 'express install'.

Page 87/948 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• UbuntuStudio 12.04 does not boot after install - no "intrd" image

  - by user72705

  After installing Ubuntu Studio 12.04 from DVD onto the fourth hard disk, it fails to boot, even when explicitly choosing the fourth hard disk as the boot device. I have SUSE 11.2 on the first 2 SCSI disks (which form a RAID) and Studio64 on the 1st IDE disk (that is, the third disk). Looking at the /boot directory on the Ubuntu partition, I see there is no initrd image. Editing the GRUB configuration file to include (hd3,1)/vmlinuz and of course (hd3,1)/initrd should fix the problem. But still GRUB gives a file not found error. This appears to me that, no mkintrd during the booting process (checked with LiveCD) runs like in OpenSUSE. How do I create the initrd to make Ubuntu bootable.

  Read the article

• Can't install Dual Boot from USB live - crash and nouvea problem

  - by user215064

  I just got a new laptop with Windows 8 pre-installed and I'm trying to make a dual boot with Ubuntu on my other hard drive but I can't make the Live USB work. I followed all the procedure for disabling the Security Boot and the UEFI setting but still doesn't work. It seems to start the installing procedure but I never get to choose anything: after a few seconds the screen turns black with an error message [18.707838] divide error: 0000 [#1] SMP (it goes on for several lines quoting some nouveau problem). Any ideas?

  Read the article

• Can't install Ubuntu 13.10 from 12.04 lts

  - by Matt Carle

  I have ubuntu 12.04 lts installed on my hp pavilion and I want to try 13.10. When I try to boot into the livecd, I get the purple ubuntu splash screen, then a blackscreen where some text flashes (to fast to see what it says) then it goes to a black screen and stays there. I know the installation disc is not the problem because I've successfully installed it on a different machine using the same disc. I've been trying to troubleshoot the issue for a while now and no luck. I have a radeon hd 8250 card. I know it's not much to go off of but any help would be greatly appreciated! Thanks!

  Read the article

• no windows 7 option after recent 12.10 install and boot repair

  - by user95240

  Earlier today i installed ubuntu 12.10 beta. Grub wasn't booting, but just going directly to my primary OS Windows 7. I assumed i had partitioned incorrectly, because partitioning isnt my strong suit. I used boot repair because it was well recomanded off a live usb. Afterwards, grub appeared, but i only had options for Ubuntu, Advanced Ubuntu Option, and my hidden windows 7 recovery partition. Please help me recover my access to windows partiton. See this link for Boot-Repair report: http://paste.ubuntu.com/1266467/ ps. ran Boot-Repair a second time - no change

  Read the article

• How to install Syngen?

  - by inLoveWithPython

  I'm using Ubuntu 12.04. I found out that there is a near-obsolete program based on the obsolete Caml Special Light by someone at INRIA ( ftp.inria.fr, directory lang/caml-light ). The program is called Syngen. I need it to create Syntax diagrams. But i am not able to run the binaries that come with it, and i'm not able to compile the source because it needs a compiler called cmlc. Somebody help, i find REALLY less documentation about this in internet.

  Read the article

• Fresh install of 12.04 using USB stick booted into tty1

  - by croc

  I just installed 12.04 Alternate for the first time to give it a try using a USB stick burned with UnetBootIn. It installed without a problem. But it booted into a tty1 console without booting into a GUI. After logging into the tty1 console, I typed unity. It appeared that the system doesn't have unity desktop. How can it be solved? My installation didn't show any error. Something worth mentioning: During installation, I had to choose an option saying 'customize the system to your needs' something like that I don't remember correctly with options 'SSH server','Mail Server', 'Ubuntu Desktop',.....,'Manual selection of packages' etc. I chose 'Ubuntu Desktop'. I haven't encountered something like this in 11.04. To do an installation of Alternate iso using UnetBootIn, i used '12.04_Hdmedia' option of that software and had to change file extension of .ude to .udeb in /pool/main/l/linux that i found in Alternate ubuntu cdrom detect to go around with the cdrom detection problem. I have a 945G intel graphics.

  Read the article

• Visual Studio 2012 : le développement pour desktop réintroduit dans la version Express gratuite, l'EDI s'ouvre à l'open-source

  Visual Studio 2012 : Microsoft réintroduit le développement d'applications desktop dans la version Express Gratuite, et poursuit son ouverture à l'open-source avec son EDI star Microsoft a écouté. Plusieurs décisions qui viennent d'être prises concernant la prochaine version de son EDI star, Visual Studio 2012 (ex-Visual Studio 11), feront certainement plaisir à la communauté. Tout d'abord, l'interface monochrome (ou plus exactement bicolore dans les gris) pourra être remplacée par une UI « à l'ancienne », avec plus de couleurs. C'est ce qu'a montré avant-hier un VP Microsoft sur la scène du TechEd d'Orlando. Deuxième bonne nouvelle, la version Express (gratuite) de Visual ...

  Read the article

• VS Express - accessing image added to project folder

  - by Petr

  Hi, I would like to know following: I added the folder "Graphics" into my project and placed one BMP to it. Now I would like to load the image from my code, but I cannot figure out how. I know its simple with resources but is there a way without adding the image into resources? Thanks

  Read the article

• Ubuntu 12.04 fresh install wont boot up

  - by user147220

  im running ubuntu 12.04 and it refuses to boot up. the screen will come on for a second, the mosue will appear, then itll go black again all inside about 3 seconds. i let it just do that for a while and eventually a window popped up saying i had a display issue. I didn't have a mouse but there was a button saying "ok" at the bottom that i couldnt click on. i hit enter, got through that screen, now im looking at another that says "What would you like to do?" - run in low-graphics mode for just one session - reconfigure graphics - troubleshoot the error - exit to console login then two buttons, cancel, and ok. I dont have a mouse and its not letting me navigate between these options with tab. firstly, if i make it through these windows will it get me into the computer so i can try and fix whats going on? also, whats going on here? also, how can i click on these buttons without the use of tab or a mouse?

  Read the article

• Ubuntu install doesn't run on latest Nexus7 64Gb?

  - by raj

  I tried installing Ubuntu on my recently purchased (for this purpose!) Nexus 7 64Gb, with the Cellular option. When I rebooted with Ubuntu, it didn't come up. I know, I need to post the errors I received. I was in a hurry to get back to something usable for the holiday (on the road, Thanksgiving, etc.), so I just reinstalled Android for now. When I have time, I'll post more of the errors. All I remember right now is that it dropped into busybox and I didn't have a keyboard or any way to attach one. (I used the 32Gb Ubuntu, by the way.) Have others seen this? Happy Thanksgiving! More later, I promise.

  Read the article

• Regular Express remove leading blank and dash character

  - by Ke

  Hi, Given a string like String a="- = - - What is your name?"; How to remove the leading equal, dash, space characters, to get the clean text, "What is your name?" Thanks.

  Read the article

• Folder location for Project->Add Class in Visual Studio 2008 Express

  - by Filip Gibki

  Hello. I like the VS option of Add Class that creates .cpp and .h file for me with a class template in it. But currently i am storing my source files in other folder than project file. Is there a way to to tell VS that i want to create those .cpp and .h files in a specific folder?

  Read the article

• 100% APC Fragmentation - Cacherouter & Pressflow install

  - by granttoth

  My APC cache has a 100% fragmentation. I'm not quite sure I understand what is going on here. For testing I jacked the available memory up to 512. After a day the total available free memory shows 73% but I still have 100% fragmentation. Would you gurus please look at my settings and offer your advice? Oh, I have read people suggest that I disable apc.stat when possible but when I do the site crashes. I am using the Pressflow build of Drupal 6 with the cacherouter module installed. Edit: (added screenshot) http://i.imgur.com/DqZEX.png

  Read the article

• Slight stuttering when moving windows in fresh 12.04 install

  - by Konsolkongen

  Installed Ubuntu 12.04 today and my problem is that when I'm moving the windows around my screen it doesn't feel smooth at all. Usually I can fix this by changing the refresh rate to 60Hz, but this time it doesn't help. My graphics card is a Nvidia GTX 560Ti and I've tried both the 295.40, 295.45 and 304.43 (which I'm currently using) but neither has resolved my problem. I searched around a bit and tried changing the refresh-rate using compizconfig-settings-manager and xrandr. No change using CCSM, but when I tried xrandr I got this reply: konsolkongen@konsolkongen-desktop:~$ xrandr -r 60Rate 60.0 Hz not available for this size - which is nonsense of course. This is what my xorg.conf file looks like: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 560 Ti" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1680x1050_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Any help would be greatly appreciated, my obsession with video quality can't stand stuttering like this. For what it's worth though, I don't have any screen tearing, so at least V-sync is on. Thanks.

  Read the article

• Install and Configure a Postfix Mail Server

  <b>Linux.com:</b> "...there are a number of ways you can go in order to get that mail server up and running. Over the years I have found Postfix to be one of the easiest to set up and most reliable to deploy in most organizations."

  Read the article

• Install Memcached With repcached "Built-In Server Side Replication" On Debian

  <b>Howtoforge:</b> "People probably know about memcached (http://memcached.org/) and its high performance name-value based memory object cache interface. Its main purpose is to provide an easy to use distributed caching engine in a multinode environment."

  Read the article

• install 64 bit as dual boot with 32 bit

  - by profgeorgefhart

  I downloaded Ubuntu 12.10 - bit .iso onto a bootable USB and want to put it on to my 32 bit 12.10 system as a dual boot, using a totally separate 1 Tb disk [which already has data on it]. However, when I go to restart and hit F8 fir BIOS set-up, I can change all the settings except the boot search order. Is there some other way to force the startup to read the USB first? Is the fact that I cannot change the search order to do with the fact that the 32 bit OS was 'Installed in legacy mode' not 'EFI? How can I rectify this? (This might be related -- might I need to update my BIOS for my Intel DX38BT motherboard? I think their last upgrade was 2009.)

  Read the article

• Kubuntu permanent install won't attach sound card

  - by rob

  I installed Kubuntu Live version and sound card visible in the volume/mixer panel. After installing the permanent version I have a dummy output where my sound card should be, therefore no sound. I re-installed the live version three times and then to permanent but the same problem each time. There is a very brief error on boot up to the permanent version that says: error. cannot attach card default. no such file or directory. I'm running Kubuntu 12.04 on a Mac G4 PPC with no other OS. I'm very new to Linux. I am able to follow instructions to help resolve this, but I'm not familiar with the OS.

  Read the article

• Clean Ubuntu 14.04 install taking longer to boot after kernel upgrade

  - by mvburgos

  Hello this is my first post. I own an Asus Chromebox (2gb ram, 16 gb sdd, 3.0 usb ports) and fresh installed Ubuntu 14.04 x64. I decided to upgrade kernel because I was experiencing some freezing issues with XBMC, So first i installed stable kernel 3.14.04 from mainline and boot time was fine (it booted very fast I would say about 5 seconds) then after a while I installed kernels 3.15 and 3.14.06 BUT this time I also removed OLD STOCK KERNELS (dunno if that has something to do) after that the problem began, boot time is taking way longer, I would say about 30 seconds. Finally today I installed kernel 3.14.07, set grub to boot with that by default but same thing :( I post boot.log and dmesg, hope it is correct for this matter, if you need any other log just let me know. boot.log dmesg

  Read the article

• how to install EasyBCD on ubuntu 11.10

  - by Kriti

  I want to delete ubuntu 11.10 from dual boot system(windows 7 + ubuntu 11.10). I currently have ubuntu as main OS but I don't want to continue with it further.I don't have CD for win 7 so I am trying other sources. I have downloaded EasyBCD on another system and pasted it on ubuntu. It is .exe file and is not running on ubuntu. I am not aware of any commands regarding installation and further process. :( So,pls suggest what to do next,I would be very thankful. :)

  Read the article

• SIP Express Router- MaxFwd Module

  - by Alice

  How can I change Max_Forward headers value in SIP request? I'm using SER and two xlite sipphones,and I want to check MaxFwd module.

  Read the article

• Sortie officielle de ASP.NET MVC 2 pour Visual Studio 2008, Visual Web Developer 2008 Express et Net

  Mise à jour du 15/03/10 Sortie officielle de ASP.NET MVC 2 Pour Visual Studio 2008, Visual Web Developer 2008 Express et Net Framework 3.5 Le mois dernier, Microsoft avait mis en ligne une Release Candidate de sa nouvelle version de ASP.NET MVC spécialement conçue pour les développeurs d'applications webs. Depuis la fin de la semaine dernière, la technologie est passé en version définitive. Elle peut être utilisée avec Visual Studio 2008 (ou Visual Web Developer 2008 Express) et Net Framework 3.5. Pour mémoire, elle est rétro-compatible avec ASP.NET MVC 1 et/ou peut-être installée side-by-side avec ce dernier. AS...

  Read the article

• Software install failure

  - by ilandroffshore

  I am getting a "Package Operations Failed" message at the 95% mark of each download. Details show "Reading database" for each 5 percentage segment until Reading database ... 95%dpkg: unrecoverable fatal error aborting: failed in buffer_read(fd): files list for package `gstreamer0.10-plugins-ugly' I have tried to download a number of piece of software (most recently PDF Editor) and am getting the same message at the same point in the download. Is there something wrong with my Ubuntu version, a virus or is it the software being downloaded? Using 10.04 LTS. P.S. Same problem when trying to download updates.

  Read the article

• 10 Things You Should Do After You Install WordPress

  It's a good idea to go to your server and locate the WordPress instruction and installation file that is automatically uploaded with the WordPress software. You need to rename this file to something random and hard to guess. This is a preventative measure to deter hackers from easily finding that your site runs WordPress and trying to exploit any vulnerabilities in the software.

  Read the article

• How to recover lost files after an install

  - by Gentry McColm

  I'm a newbie learning along the way. I recently installed a 2nd hdd into my ubuntu box. Have one of about 160g which runs ubuntu 12.04. And the new hdd was 1 tb, used for holding videos. I had set up 2nd drive as ext3 I believe. And set up folders on it to hold the videos. Worked great. Also thought I had set it up for auto mount. I was able to read and write on it. Etc. Computer froze, so had to reboot it. When I did, system would not reboot: hung on the Ubuntu screen with 5 dots. I hit a few buttons and the command screen showed up, indicating that my 2nd hdd would not mount. Stopped up whole system. Tried rebooting, no go. Had to reinstall ubuntu on the 1st hdd. Did not apparently touch the 2nd one. Well, when I got it up and running, my 2nd hdd mounted automatically (yeah!), but now I cannot find my videos I already had on it. I had not put any more than about 30g of videos on it, but now when I read its Properties, it says I'm using about 50g. So, I'm wondering if somewhere in that, buried, are my 17 videos. Any help in recovering this? Thanks!

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >