Search Results

Search found 16980 results on 680 pages for 'home edition'.

Page 87/680 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• Everytime i am trying to connect to my box using SSH, its failing not connecting

  - by YumYumYum

  From any other PC doing SSH to my Ubuntu 11.10,is failing. My network setup: Telenet ISP (Belgium) Fiber cable < RJ45 cable straight to Ubuntu PC Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ nmap 192.168.0.128 Starting Nmap 5.50 ( http://nmap.org ) at 2012-06-08 19:11 CEST Nmap scan report for 192.168.0.128 Host is up (0.00045s latency). All 1000 scanned ports on 192.168.0.128 are closed (842) or filtered (158) Nmap done: 1 IP address (1 host up) scanned in 6.86 seconds ubuntu@ubuntu:~$ netstat -aunt | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 1 192.168.0.128:58616 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:56749 199.7.57.72:80 ESTABLISHED tcp 0 1 192.168.0.128:58614 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:49916 173.194.65.113:443 ESTABLISHED tcp 0 1 192.168.0.128:45699 64.34.119.101:80 SYN_SENT tcp 0 0 192.168.0.128:48404 64.34.119.12:80 ESTABLISHED tcp 0 0 192.168.0.128:54161 67.201.31.70:80 TIME_WAIT $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 $ apt-get install openipml openhpi-plugin-ipml $ openipmish > help redisp_cmd on|off > redisp_cmd on redisp set Final follow up: Step 1: BUG for network card driver r8169 Step 2: get the latest build version http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=4&PFid=4&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true#RTL8110SC(L) Step 3: build / make $ cd /var/tmp/driver $ tar xvfj r8169.tar.bz2 $ make clean modules && make install $ rmmod r8169 $ depmod $ cp src/r8169.ko /lib/modules/3.xxxx/kernel/drivers/net/r8169.ko $ modprobe r8169 $ update-initramfs -u $ init 6 Voila!!

  Read the article

• jQuery Animate Inconsistencies between Browsers

  - by silent1mezzo

  I'm trying to figure out why this works in FireFox, Chrome but not in IE and not properly in Safari and Opera (you can view it working at http://41six.com/about/) HTML: <div id="menu"> <ul> <li> <a href="/" class="home" title="Home" alt="fortyonesix">&nbsp;</a> <div id='home-hover'>Home Page</div> </li> </ul> </div> CSS: #menu .home { display:block; height:24px; width:24px; background-image: url('../images/Home.png'); } #home-hover { position:fixed; padding: 3px 0 3px 10px; left:40px; top:125px; width: 100px; height: 20px; background-color:#000; color: #fff; z-index:9999; opacity: .9; filter: alpha(opacity=90); -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=90)"; -moz-border-radius-topright: 5px; -webkit-border-top-right-radius: 5px; -moz-border-radius-bottomright: 5px; -webkit-border-top-bottom-radius: 5px; display:none; } JQuery: $('.home').hover(function() { $('#home-hover').animate({width:'toggle'},200); }, function() { $('#home-hover').animate({width:'toggle'},200); }); It's definitely not pretty but I'm not sure why its not working for Safari, Opera and IE

  Read the article

• Django and Google App Engine Helper not finding the ipaddr module.

  - by Phil

  I'm trying to get Django running on GAE using this tutorial. When I run python manage.py runserver I get the stacktrace below. I'm new to both django and python so I don't know what my next steps are (This is Ubuntu Jaunty btw). It seems django isn't finding the GAE module ipaddr which comes with SDK 1.3.1. How do I get django to find this module? /home/username/bin/google_appengine/google/appengine/api/datastore_file_stub.py:40: DeprecationWarning: the md5 module is deprecated; use hashlib instead import md5 /home/username/bin/google_appengine/google/appengine/api/memcache/__init__.py:31: DeprecationWarning: the sha module is deprecated; use the hashlib module instead import sha Traceback (most recent call last): File "manage.py", line 18, in <module> InstallAppengineHelperForDjango() File "/home/username/Development/GAE/myapp/appengine_django/__init__.py", line 543, in InstallAppengineHelperForDjango InstallDjangoModuleReplacements() File "/home/username/Development/GAE/myapp/appengine_django/__init__.py", line 260, in InstallDjangoModuleReplacements import django.db File "/home/username/Development/GAE/myapp/django/db/__init__.py", line 57, in <module> 'TIME_ZONE': settings.TIME_ZONE, File "/home/username/Development/GAE/myapp/appengine_django/db/base.py", line 117, in __init__ self._setup_stubs() File "/home/username/Development/GAE/myapp/appengine_django/db/base.py", line 128, in _setup_stubs from google.appengine.tools import dev_appserver_main File "/home/username/bin/google_appengine/google/appengine/tools/dev_appserver_main.py", line 82, in <module> from google.appengine.tools import appcfg File "/home/username/bin/google_appengine/google/appengine/tools/appcfg.py", line 53, in <module> from google.appengine.api import dosinfo File "/home/username/bin/google_appengine/google/appengine/api/dosinfo.py", line 25, in <module> import ipaddr ImportError: No module named ipaddr

  Read the article

• Install proprietary drivers 14.04 NVIDIA (steam segmentation issue)

  - by allthosemiles

  Recently, I finally got the official drivers for my NVIDIA 560 Ti card installed on Ubuntu 14.04 (hooray) However I started looking into installing Steam and I'm getting segmentation errors when I try to run the software. I tried installing 32-bit libs and it seemed like they weren't available or they were already installed. Upon further investigation, I found that a solution is to install the proprietary drivers, install steam then switch back to the other drivers. I'm not really sure what "proprietary drivers" are in all honesty. Has anyone gone through this process that could provide some insight here? (I installed the official 64-bit driver from the NVIDIA site for my 560 Ti just for reference. And the Ubuntu version installed is 64-bit as well) Update: This is the error text I get when trying to run steam after installing it via the ubuntu store. Running Steam on ubuntu 14.04 64-bit STEAM_RUNTIME is enabled automatically Installing breakpad exception handler for appid(steam)/version(1401381906_client) /home/dbrewer/.steam/steam.sh: line 755: 3943 Segmentation fault (core dumped) $STEAM_DEBUGGER "$STEAMROOT/$PLATFORM/$STEAMEXE" "$@" mv: cannot stat ‘/home/dbrewer/.steam/registry.vdf’: No such file or directory Installing bootstrap /home/dbrewer/.steam/bootstrap.tar.xz Reset complete! Restarting Steam by request... Running Steam on ubuntu 14.04 64-bit STEAM_RUNTIME has been set by the user to: /home/dbrewer/.steam/ubuntu12_32/steam-runtime Installing breakpad exception handler for appid(steam)/version(1401381906_client) /home/dbrewer/.steam/steam.sh: line 755: 4066 Segmentation fault (core dumped) $STEAM_DEBUGGER "$STEAMROOT/$PLATFORM/$STEAMEXE" "$@" What I get when I run "steam --reset" mv: cannot stat ‘/home/dbrewer/.steam/registry.vdf’: No such file or directory Installing bootstrap /home/dbrewer/.steam/bootstrap.tar.xz Reset complete!

  Read the article

• How do I rename a table in SQL Server Compact Edition?

  - by romkyns

  I've designed my SQL CE tables using the built-in designer in VS2008. I chose the wrong names for a couple. I am now completely stuck trying to find a way to rename them. I am refusing to believe that such a feature could have been "forgotten". How do I rename an existing table using the VS2008 designer, or a free stand-alone app?

  Read the article

• SSIS 2008 - How to read from SQL Server Compact Edition file?

  - by Gustavo Cavalcanti

  I can see "SQL Server Compact Destination" under Data Flow Destinations, but I am looking for its source counterpart. If I choose ADO.Net source and create a new connection, there's no provider for SQL CE. What am I missing? Thanks! Update: I am able to create a "Data Source" (under "Data Sources" folder in my SSIS project") that connects to an existing Sql CE file. But how can I use this Data Source in my data flow?

  Read the article

• NuGet JustMock

  - by mehfuzh

  As most of us already know JustMock got  a free edition. The free edition is not a stripped down of the features of the full edition but I would rather say its a strip down of the type you can mock. Technically, free version runs on  proxy as full version runs on proxy + profiler. In full version, It switches to profiler when you are mocking final methods or sealed class or anything else that can not be done using inheritance. Like in full version you can mock non public methods , in free version you can still do it but it has to be virtual for protected or must be done through InternalsVisibleTo attribute for internal virtual methods (If you have access to the source and can apply the attribute). Now, you can get a copy of free edition from the product page. Install it and off you go. But it is also exposed to NuGet. Those of you are not familiar with NuGet (that will be odd). But still NuGet is the centralized package manager from Microsoft that cuts the workflow of manual inclusion of  libraries in your project. I think NuGet in future will limit the scope of  “.vsi” packages and installers because of its ease (except in some cases). Its similar to ruby gems. In ruby, virtually you can install any library in this way “gems  install <target_library>” and you are off to go. It will check the dependencies, install them or less prompt with the steps you need to do.   Now sticking to the post, to get started you first need to install NuGet package manager. Once you have completed the step pressing “Ctrl + W, Ctrl + Z” it will bring up an console like one below:   Once you are here, you just have to type “install-package justmock” Next, it will should print the confirmation when the installation is complete: Moving to visual studio solution explorer, you will now see:   Finally, NuGet is still in its early ages and steps that are shown here may not remain the same in coming releases, but feel free to enjoy what is out there right now. Regarding JustMock free edition, there is a nice post by Phil Japikse at Introducing JustMock Free Edition. I think its worth checking if not already.   Have fun and happy holidays!

  Read the article

• ICQ

  The all new, streamlined Lite edition of ICQ with Xtraz

  Read the article

• Quick question about open_basedir

  - by Gio

  Hello, On my server, I have following setting: open_basedir /home/ :/usr/lib/php :/usr/local/lib/php :/tmp/ :/usr/local/ :/usr/bin Now, I am little bit confused about ending / in the / home / setting, does that mean that all subfolders inside home have same rights? or does it mean that only home files can be accessed? So, basically what is the main difference between: /home/ and /home With example if possible Thank you in advance.

  Read the article

• Limiting ssh user account only to access his home directory!

  - by EBAGHAKI

  By reading some tutorials online I used these commands: Make a local group: net localgroup CopsshUsers /ADD Deny access to this group at top level: cacls c:\ /c /e /t /d CopsshUsers Open access to the copSSH installation directory: cacls copssh-inst-dir /c /e /t /r CopsshUsers Add Copssh user to the group above: net localgroup CopsshUsers mysshuser /add simply put these commands will try to create a usergroup that has no permission on your computer and it only have access to the copSSH Installation directory. This is not true, since you cannot change the permission on your windows directory, the third command won't remove access to windows folder (it says access denied on his log). Somehow I achieved that by taking ownership of Windows folder and then i execute the third command so CopsshUsers has no permissions on windows folder from now on. Now i tried to SSH to the server and it simply can't login! this is kind of funny because with permission on windows directory you can login and without it you can't!! So if you CAN SSH to the server somehow you know that you have access to the windows directory! (Is this really true??) Simple task: Limiting ssh user account only to access his home directory on WINDOWS and nothing else! Guys please help!

  Read the article

• Google Books API - How do I separate Book from Book Edition?

  - by RadiantHex

  Hi, I'm using Google Book Search API to add missings bits and pieces to my database. Problem is that The API gives me back a list of book editions, and not reference to the original book itself. The data I'm trying to get is this: Original title: The Hobbit Original year of publication: 1937 Can anyone help? Just in case anyone asks: I'm developing this in Python.

  Read the article

• What are license terms for Biztalk Server 2009 Developer Edition?

  - by 13ren

  Where can I find the license terms for Microsoft Biztalk Server? (especially the Developer license). I've found the pricing and licensing page, which links to a FAQ - but I can't find the actual legal document anywhere (i.e. the actual license terms). The closest is a 100+ page document of "user rights" - but it is only the changes from previous licenses (and it covers all their products).

  Read the article

• Bash & 'su' script giving an error "standard in must be a tty".

  - by sHz

  Folks, I'm having an issue with a bash script which runs a particular command as a different user. The background: Running on a Linux box (CentOS), the script is quite simple, its starting the hudson-ci application. declare -r HOME=/home/hudson declare -r RUNAS=hudson declare -r HOME=/home/hudson declare -r LOG=hudson.log declare -r PID=hudson.pid declare -r BINARY=hudson.war su - ${RUNAS} -c "nohup java -jar ${HOME}/${BINARY} >> ${HOME}/${LOG} 2>&1; echo $! > ${HOME}/${PID}" & This is the bridged version of the script, when run, the script exists with "standard in must be a tty". Any ideas on what I could be doing wrong? I've tried Dr Google and all the advise hasn't helped thus far.

  Read the article

• How to configure installed Ruby and gems?

  - by NARKOZ

  Hi. My current gem env returns: RubyGems Environment: - RUBYGEMS VERSION: 1.3.6 - RUBY VERSION: 1.8.7 (2008-08-11 patchlevel 72) [x86_64-linux] - INSTALLATION DIRECTORY: /home/USERNAME/.gems - RUBYGEMS PREFIX: /home/narkoz - RUBY EXECUTABLE: /usr/bin/ruby1.8 - EXECUTABLE DIRECTORY: /home/USERNAME/.gems/bin - RUBYGEMS PLATFORMS: - ruby - x86_64-linux - GEM PATHS: - /home/USERNAME/.gems - /usr/lib/ruby/gems/1.8 - GEM CONFIGURATION: - :update_sources => true - :verbose => true - :benchmark => false - :backtrace => false - :bulk_threshold => 1000 - "gempath" => ["/home/USERNAME/.gems", "/usr/lib/ruby/gems/1.8"] - "gemhome" => "/home/USERNAME/.gems" - REMOTE SOURCES: - http://rubygems.org/ How can I change path /home/USERNAME/ to my own without uninstalling? OS: Debian Linux

  Read the article

• how to use asadmin deploy for Sun Application Server Plaform Edition 9.1?

  - by dfdfd

  I try to use the command so that i can schedule the deployment using cron trigger. But however i been encountering this error. java.io.IOException: Remote host closed connection during handshake What could be the reason and how do i resolve it? Is it something to do with the port i define? I defined the port used in the admin-server system. As for secure i set to true.

  Read the article

• Cannot chown my own files from NFS

  - by valpa

  We have a NFS server provide home directory for many account, which provided by a NIS server. I have account A and B. In /home/A, I try to copy "cp -a /home/B/somedir ~/". Then I found in /home/A/somedir, all files are owned by user A. Then if I do "chown -R B:B somedir", I got "Operation not permitted" error. I am user A, "cp -a" didn't preserve the original user (B). Then I cannot chown my own files. Any suggestion? I fix my own issue by "chmod 777 /home/A", "su - B" and "cp -a somedir /home/A/", and "su - A", then "chmod 755 /home/A". But it is not a good solution.

  Read the article

• SSH asks for password

  - by user1435470

  I have already : Installed the server Generated the pub/pri keys with -P "" Copied the id_rsa.pub to authorized_keys ssh localhost answered "yes", copied to known_hosts tried ssh localhost still asks for password Output: hduser@hduser1-desktop:~$ ssh -v localhost OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /home/hduser/.ssh/identity type -1 debug1: identity file /home/hduser/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/hduser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debian- 3ubuntu7 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu7 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /home/hduser/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Offering public key: /home/hduser/.ssh/id_rsa debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/hduser/.ssh/identity debug1: Trying private key: /home/hduser/.ssh/id_dsa debug1: Next authentication method: password Any suggestions ? Cheers

  Read the article

• how to put SQL Server express R2 advance and Wt edition in the visual studio setup as a CLickOnce pr

  - by ZeroAbsolute

  Like i said in the topic: I would like to insert as a ClickOnce prerequisites sql server express r2 editions. I can do a similar package.xml and product.xml like that of sql server express that i took from vs2010 but i don't have the public key for SQLEXPRWT_x86_ENU.exe does anyone know how to find the public key ???

  Read the article

• How to route Url with # character in Asp.Net 4?

  - by cjinojl

  How to route url contains # sharp character like this: ~/page.aspx#/Home to be: ~/Home

  Read the article

• How to run javascript in ECMA 5th edition strict mode?

  - by marko

  Is there any way to know how and which browsers support it?

  Read the article

• How can I make a home widget behave like a launcher icon?

  - by Tughi

  I have a widget that acts as a launcher on the home screen. How can I make it behave like a launcher icon? I use this layout for portrait: <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent"> <RelativeLayout android:background="@drawable/widget_background_selector" android:focusable="true" android:layout_width="74dip" android:layout_height="79dip" android:layout_marginLeft="3dip" android:layout_marginTop="14dip"> <ImageView android:id="@android:id/background" android:layout_width="72dip" android:layout_height="72dip" android:layout_marginLeft="1dip" android:layout_marginTop="4dip" /> </RelativeLayout> </RelativeLayout> And this is the background selector: <selector xmlns:android="http://schemas.android.com/apk/res/android"> <item android:state_pressed="true" android:drawable="@drawable/widget_background_pressed" /> <item android:state_window_focused="true" android:state_focused="true" android:drawable="@drawable/widget_background_focused" /> <item android:state_window_focused="false" android:state_focused="true" android:drawable="@android:color/transparent" /> </selector> This way if I use the DPAD the widget is focusable but the click doesn't work. The touch still works but the widget is not displayed as focused. Any idea what I do wrong?

  Read the article

• SQL Compact Edition 3.5 SP 1 - LockTimeOutException - how to debug?

  - by Bob King

  Intermittently in our app, we encounter LockTimeoutExceptions being throw from SQL CE. We've recently upgraded to 3.5 SP 1, and a number of them seem to have gone away, but we still do see them occasionally. I'm certain it's a bug in our code (which is multi-threaded) but I haven't been able to pin it down precisely. Does anyone have any good techniques for debugging this problem? The exceptions log like this (there's never a stack trace for these exceptions): SQL Server Compact timed out waiting for a lock. The default lock time is 2000ms for devices and 5000ms for desktops. The default lock timeout can be increased in the connection string using the ssce: default lock timeout property. [ Session id = 6,Thread id = 7856,Process id = 10116,Table name = Product,Conflict type = s lock (x blocks),Resource = DDL ] Our database is read-heavy, but does seldom writes, and I think I've got everything protected where it needs to be. EDIT: SQL CE already automatically uses NOLOCK http://msdn.microsoft.com/en-us/library/ms172398(sql.90).aspx

  Read the article

• How to configure installed Ruby and gems?

  - by NARKOZ

  My current gem env returns: RubyGems Environment: - RUBYGEMS VERSION: 1.3.6 - RUBY VERSION: 1.8.7 (2008-08-11 patchlevel 72) [x86_64-linux] - INSTALLATION DIRECTORY: /home/USERNAME/.gems - RUBYGEMS PREFIX: /home/narkoz - RUBY EXECUTABLE: /usr/bin/ruby1.8 - EXECUTABLE DIRECTORY: /home/USERNAME/.gems/bin - RUBYGEMS PLATFORMS: - ruby - x86_64-linux - GEM PATHS: - /home/USERNAME/.gems - /usr/lib/ruby/gems/1.8 - GEM CONFIGURATION: - :update_sources => true - :verbose => true - :benchmark => false - :backtrace => false - :bulk_threshold => 1000 - "gempath" => ["/home/USERNAME/.gems", "/usr/lib/ruby/gems/1.8"] - "gemhome" => "/home/USERNAME/.gems" - REMOTE SOURCES: - http://rubygems.org/ How can I change path /home/USERNAME/ to my own without uninstalling? OS: Debian Linux

  Read the article

• Home based business would like customers to schedule via website the time, day and date they want to take a class.

  - by Alessandro Machi

  I'm using google blogger. I want to ad thumbnail images of different classes I will be offering in my home film/video/sound/lighting studio. The idea is the prospective student visits my website, sees a class they want to take, clicks the thumbnail so first read a descriptive article about the class, at which point they can schedule the class for the time, day, and date of their choosing between the hours of 5am to 9pm, 365 days a year. As soon as the student has inputed the time, day and date of the class they want, they would go to a check out page to purchase the class time. The student would then be sent an email confirmation along with the exact location, the class name, and the time and date they selected. I was thinking of using Dwolla for the check out page because Dwolla offers either no fee or 25 cents per payment transaction, but I'm not sure I can hook up to them easily enough. My blog site is not finished by a longshot. I still have to actually input all of the class thumbnail images along with descriptions, but if you need to see what the page looks like the web address is http://www.myalexlogic.com Google blogger allows for third party code to be added within movable gadgets.

  Read the article

• Url mod_rewrite for static chained pages

  - by user1121487

  How can I achieve this with mod_rewrite? from: .com/index.php?menu=home to: .com/home AND from: .com/index.php?menu=home&list=hello to: .com/home/hello ALSO (without the folder hierarki) from: .com/index.php?menu=home&list=hello to: .com/hello I'm using this for the first one: RewriteRule ^([^/\.]+)/?$ index.php?menu=$1 [L] But how to I connect them if there are multiple variables? Tried this: RewriteRule ^([^/]*)/([^/]*)?$ index.php?home=$1&list=$2

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >