Search Results

Search found 16499 results on 660 pages for 'off'.

Page 87/660 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • Internet connection sharing between Windows XP and Windows 7

    - by Dave
    I bought my lil sister's netbooks for Christmas and I've been having a heck of a time trying to get Internet Connection Sharing to work. The host computer is a Windows XP box and it uses a US Cellular 3G modem dongle thingy to set it's Internet access. Additionally I have a hard wire plugged into the LAN1 port of the router described below. (I tried the WAN port out of desperation but things didn't seem happy that way.) Additionally they have a linksys router (can't remember specific model number, I will find this out) that I was using to take advantage of it's wireless capabilities. Originally thought about updating the router to use dd-wrt, but after reading the instructions it looked like to much of a pita (had to downgrade firmware, then install dd-wrt) to set up, eventually I caved, out of desperation, and ended up successfully installing dd-wrt on the router. I have DHCP turned off on the router, actually all I could select was DHCP forwarder. The netbooks both have windows 7 starter installed on them. Initially, I had the networks joined to a homegroup but I dropped that and everyone is able to see everyone in their respective network explorers. When I turn on Internet Connection Sharing on the host, its IP on the LAN changed to 192.168.0.1, so I arbitrarily decided to assign the router to port 192.168.0.100. When I connect the netbooks they get IPs dynamically. As I stated before, everyone can see everyone in the network explorer, and shares can be accessed. The weird thing is that everyone can ping the router but they cannot ping each others IPs. The status on the netbooks says that there is no Internet Connectivity. Another thing I tried was manually setting the DNS servers on the netbooks to the DNS servers that the host computer has. The funny thing is when I ping an outside domain such as google.com the IP address resolves, however I get no responses from the pings. When I tried plugging the host into the WAN port I could ping the router, nor could I access the router's web access admin. Another thing I tried was turning off the firewall on the netbooks and the firewall off on the host computer for the LAN connection, and they still could not ping each other. Also I thought I should be able to start a remote desktop connection but I couldn't do that either, I also checked to make sure that computers would in fact accept a request for remote desktop connections.

    Read the article

  • Run a batch file silently, executed at remote desktop login

    - by ILMV
    In our office we are using Linux thin client machines, they work very well except the lack of IE, which is a pain because the corporations we deal with are too stupid to update their web apps (no flame wars please). To solve this problem we have machine in our computer room which users remote desktop into to access internet explorer, this is achieved by running a batch script which opens IE and when it closes logs them off, this setup works well for us. Even though I have @echo off and the cmd window isn't displaying anything, I would really like that batch file to be executed silently, so the cmd window doesn't appear at all. Is this possible? The Ubuntu terminal server client has an option to launch a file / app at login, is there a command I can use to run this batch silently. I have tried these: C:\my_batch.bat /NOCONSOLE C:\my_batch.bat /NOWINDOW C:\my_batch.bat /B C:\my_batch.bat /Q ...with no success, perhaps it's the way I am doing it? Cheers :-) Edit The remote desktop platform is a Windows XP machine, nothing entirely special but not a Windows Server setup.

    Read the article

  • SharePoint 2007 / 2010 Content Indexing &ldquo;The file reached the maximum download limit. Check that the full text of the document can be meaningfully crawled.&rdquo;

    - by Stacy Vicknair
    If you have large files in a content source that is being indexed by Sharepoint you might run into the following error message: “The file reached the maximum download limit. Check that the full text of the document can be meaningfully crawled.” This is usually caused because SharePoint’s MaxDownloadSize setting is set lower than the size of the file you are attempting to index. You can increase this value, restart the service then kick off a full crawl in order to fix this issue, but SharePoint 2007 and 2010 have different methods for accomplishing this task.   Sharepoint 2007 Open up the Registry editor and increase the MaxDownloadSize value to a number (in MB) higher than the largest file being indexed. You can find this at: HKEY_LOCAL_MACHINE\Software\Microsoft\Search\1.0\Gathering Manager After you increase the size, cycle the search service and kick off a full crawl of the content source in question.   Sharepoint 2010 With SharePoint 2010 you can use PowerShell via the Sharepoint 2010 Console in order to change the MaxDownloadSize. Execute the following commands to update the value: 1: $ssa = Get-SPEnterpriseSearchServiceApplication 2: $ssa.SetProperty(“MaxDownloadSize”, <new size in MB>) 3: $ssa.Update()   References: http://support.microsoft.com/kb/287231 http://blogs.technet.com/b/brent/archive/2010/07/19/sharepoint-server-2010-maxdownloadsize-and-maxgrowfactor.aspx   Technorati Tags: SharePoint,WSS,MaxDownloadSize,Search

    Read the article

  • Ubuntu, No wireless networks found after correctly installed madwifi

    - by Peter
    Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

    Read the article

  • Adding many IP addresses to Windows Firewall using CLI fails partially

    - by Thomas
    I have a PowerShell script which adds IP addresses to Windows Firewall using the "netsh advfirewall" command. (As described in this question: How to append netsh firewall rules, not just replace). The problem is that when adding a lot of IP addresses (currently over 700) the string of IP addresses seems to be 'cut off' at some point. Only an X amount of the total amount of IP addresses are actually added to the firewall, the rest... not. The script is very simple, and looks something like this: $ip = "123.123.123.123,124.124.124.124,125.125.125.125 and so on" netsh advfirewall firewall set rule name="*" new remoteip="$ip" I tried to echo the string to see if it's cut off; echo $ip But the complete string is correctly echo'ed. Is there some kind of string length limit for the netsh command? Or anything else that could be causing this issue?

    Read the article

  • Creating Multiple Users on Single PHP-FPM Pool

    - by Vince Kronlein
    Have PHP-FPM/FastCGI up and running on my cPanel/WHM server but I'd like have it allow for multiple users off of a single pool. Getting all vhosts to run off a single pool is simple by adding this to the Apache include editor under Global Post Vhost: <IfModule mod_fastcgi.c> FastCGIExternalServer /usr/local/sbin/php-fpm -host 127.0.0.1:9000 AddHandler php-fastcgi .php Action php-fastcgi /usr/local/sbin/php-fpm.fcgi ScriptAlias /usr/local/spin/php-fpm.fcgi /usr/local/sbin/php-fpm <Directory /usr/local/sbin> Options ExecCGI FollowSymLinks SetHandler fastcgi-script Order allow,deny Allow from all </Directory> </IfModule> But I'd like to find a way to implement php running under the user, but sharing the pool. I manage and control all the domains that run under the pool so I'm not concerned about security of files per account, I just need to make sure all scripting can be executed by the user who owns the files, instead of needing to change file permissions for each account, or having to create tons of vhost include files.

    Read the article

  • Windows will not go into standby

    - by Robert
    When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. If I have a TV program scheduled to record I get a window asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes. (If a program is not scheduled then that task in not running/in memory - this problem happens even if I'm not watching TV and no TV scheduling task is running.) This problem happens regardless of whether Media Center is running. Windows XP SP3 Media Center Edition, all current updates installed.

    Read the article

  • Podcast Show Notes: Architect Day Panel Highlights

    - by Bob Rhubart
    The 2010 series of Oracle Technology Network Architect Day events kicked off in May with events in Dallas, Texas, Redwood Shores, California, and Anaheim, California. The centerpiece of each Architect Day event is a panel discussion that brings together the day's various presenters along with experts drawn from the local Oracle community. This week’s ArchBeat program presents highlights from the panel discussion from the event held in Anaheim. Listen The voices you’ll hear in these highlights belong to (listed in order of appearance): Ralf Dossmann: Director of SOA and Middleware in Oracle’s Enterprise Solutions Group LinkedIn | Oracle Mix Floyd Teter: Innowave Technology, Oracle ACE Director Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Basheer Khan: Innowave Technology, Oracle ACE Director Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Jeff Savit:  Oracle virtualization expert, former Sun Microsystems principal engineer Blog | LinkedIn | Oracle Mix Geri Born: Oracle security analyst LinkedIn | A 10-minute podcast can't really do justice to the hour-long panel discussion at each Architect Day event, let alone the discussion that is characteristic of each session throughout each Architect Day. But at least you’ll get a taste of what you’ll find at the live events. You’ll find slide decks and more from this first series of 2010 events in the Architect Day Artifacts post on this blog. More dates/cities will be added soon to the Architect Day schedule.  Coming Soon Next week’s ArchBeat program kicks off a three-part series featuring Cameron Purdy,  Oracle ACE Director Aleksander Seovic, and Oracle ACE John Stouffer in a conversation about data grid technology and Oracle Coherence. Stay tuned: RSS Technorati Tags: oracle,oracle technology network,archbeat,arch2arch,podcast,architect day del.icio.us Tags: oracle,oracle technology network,archbeat,arch2arch,podcast,architect day

    Read the article

  • Screen gets stuck in a dim setting after waking up

    - by Mason Wheeler
    I've got a laptop that I recently upgraded from Vista to Windows 7. It works a lot better now for a lot of things, but there's one problem I've had happen a few times that never happened under Vista. When I put the system to sleep, then occasionally when I wake it up again, for no apparent reason, the screen's dim. Sometimes it's as if half the backlighting was turned off, and sometimes it's as if all the backlighting was turned off, all except for the mouse pointer, which remains as bright white as ever. Trying to change the screen's brightness does nothing, but rebooting fixes this. Has anyone else seen this? Any ideas on what's causing it or how to make it stop happening?

    Read the article

  • #altnetseattle &ndash; Collaboration, Why is it so hard!

    - by GeekAgilistMercenary
    The session convened and we began a discussion about why collaboration is so hard. To work together in software better us engineers have to overcome traditional software approaches (silos of work) and the human element of tending to go off in a corner to work through an issue. It was agreed upon that software engineers are jack asses of jack assery. Breaking down the stoic & silent types by presenting a continuous enthusiasm until the stoic and silent types break down and open up to the group.  Knowing it is ok to ask the dumb question or work through basic things once in a while. Non-work interactions are pivotal to work related collaboration. Collaboration is mostly autonomous of process (i.e. Agile or Waterfall) Latency time should be minimal in the feedback loop for software development. Collaboration is enhanced by Agile Ideals, and things like Scrum or Lean Process. Agile is not a process, Lean and Scrum are process.  Agile is an ideal. Lean, Agile, Scrum, Waterfall, Six Sigma, CMMI, oh dear. . . Great session.  Off to the next session and more brain crunching. . . weeeeeeee!

    Read the article

  • Hyper-V Machine drifts time all over, even with NTP

    - by MichaelGG
    Resolved The problem was Hyper-V on that machine. I removed Hyper-V, installed VMware Server, ran the same VM. Time sync issues went away (< 100ms difference after a day). My setup is like this: HYV1 - HyperV machine (non domain) - sync irrelevant AD1 - VM AD server on HYV1, sync'd to time.nist.gov. HyperV time sync off. S1 - Physical machine, sync'd to domain. S2 - Physical machine running HyperV, sync'd to domain. V1 - Linux VM machine on S2, sync'd to AD1. No HyperV integration. AD1 and S1 have fine sync -- stripchart shows less than 100ms difference. S2 drifts like crazy. Here's a bit of the stripchart against AD1: 18:33:22 d:+00.0010138s o:+05.4101899s 18:33:24 d:+00.0010138s o:+05.4319765s 18:33:26 d:+00.0000000s o:+05.4788429s 18:33:28 d:+00.0000000s o:+05.6089942s 18:33:30 d:+00.0010138s o:+05.7240269s 18:33:32 d:+00.0000000s o:+06.0421911s 18:33:34 d:+00.0081104s o:+06.5613708s 18:33:37 d:+00.0000000s o:+06.9096594s 18:33:39 d:+00.0000000s o:+06.8867838s 18:33:41 d:+00.0010127s o:+06.8936401s In 20 seconds, it drifted over a second. If I manually reset it to within 1s, within a few minutes it'll be back drifting about 2 seconds. Overnight it went from ~2s to ~5s. The Linux VM inside S2 has perfect sync with AD1. Here's the config: C:\Users\mgg>w32tm /dumpreg /subkey:Parameters Value Name Value Type Value Data ------------------------------------------------------------ ServiceDll REG_EXPAND_SZ %systemroot%\system32\w32time.dll ServiceMain REG_SZ SvchostEntry_W32Time ServiceDllUnloadOnStop REG_DWORD 1 Type REG_SZ NT5DS NtpServer REG_SZ ad01.mydomain ad02.mydomain C:\Users\mgg>w32tm /dumpreg /subkey:Config Value Name Value Type Value Data ----------------------------------------------------------- FrequencyCorrectRate REG_DWORD 4 PollAdjustFactor REG_DWORD 5 LargePhaseOffset REG_DWORD 50000000 SpikeWatchPeriod REG_DWORD 900 LocalClockDispersion REG_DWORD 9 HoldPeriod REG_DWORD 5 PhaseCorrectRate REG_DWORD 1 UpdateInterval REG_DWORD 30000 EventLogFlags REG_DWORD 2 AnnounceFlags REG_DWORD 5 TimeJumpAuditOffset REG_DWORD 28800 MinPollInterval REG_DWORD 2 MaxPollInterval REG_DWORD 8 MaxNegPhaseCorrection REG_DWORD -1 MaxPosPhaseCorrection REG_DWORD -1 MaxAllowedPhaseOffset REG_DWORD 300 I looked at the event log, and apart from warnings about sync (after it gets way out of sync), there's no other warnings. How can I go about troubleshooting this? It's the only machine that is having this problem. All the other machines (physical and virtual) are doing fine. Edit: To clarify: The VM (AD1) has integration turned off and syncs to time.nist.gov. AD1 is fine. It's the physical machine S1 that can't sync to AD1 and drifts all over. All the other physical servers are able to sync to AD1 just fine. Update So, it appears to be an issue of running the VM. The clock slips slowly with the VM off. Turned on, it immediately starts losing seconds. I swt the VM to only use half the resources, and that seems to have slightly mitigated it, for now. Thanks!

    Read the article

  • AT&T - Customer service hahahahahahahahahahahahahahaha

    - by AreYouSerious
    Okay, I'm a separated 2 time Iraq war veteran, living in Germany Supporting the military. About a year and a hald ago I bought an iPhone 4 off a guy from Craigslist. I thought the phone was unlocked, but when I got to Germany I realized it was not. I called AT&T and they told me that due to the contract with Apple they could not unlock any iPhone period. After the lawsuit with Apple, they started unlocking iPhones. So Today I called up their customer support and asked if they could unlock my phone. They said that they would only do it if I were a previous customer, could provide the information from the person that I had bought it from, or if I bought one at cost.-note, it has a baseband that is not able to be "unlocked" by software.Hello I already own the device, and a year and a half ago I bought it off someone that couldn't afford it... so no, I don't have the at&t account information from him. Just another example of why I won't ever use AT&T again. and I still have this iPhone that I have to jail break, and can't use a a phone. STAY AWAY FROM AT&T. They don't know the meaning of customer service!

    Read the article

  • Rotation of bitmap using a frame by frame animation

    - by pengume
    Hey every one I know this has probably been asked a ton of times but I just wanted to clarify if I am approaching this correctly, since I ran into some problems rotating a bitmap. So basically I have one large bitmap that has four frames drawn on it and I only draw one at a time by looping through the bitmap by increments to animate walking. I can get the bitmap to rotate correctly when it is not moving but once the animation starts it starts to cut off alot of the image and sometimes becomes very fuzzy. I have tried public void draw(Canvas canvas,int pointerX, int pointerY) { Matrix m; if (setRotation){ // canvas.save(); m = new Matrix(); m.reset(); // spriteWidth and spriteHeight are for just the current frame showed m.setTranslate(spriteWidth / 2, spriteHeight / 2); //get and set rotation for ninja based off of joystick m.preRotate((float) GameControls.getRotation()); //create the rotated bitmap flipedSprite = Bitmap.createBitmap(bitmap , 0, 0,bitmap.getWidth(),bitmap.getHeight() , m, true); //set new bitmap to rotated ninja setBitmap(flipedSprite); // canvas.restore(); Log.d("Ninja View", "angle of rotation= " +(float) GameControls.getRotation()); setRotation = false; } And then the Draw Method here // create the destination rectangle for the ninjas current animation frame // pointerX and pointerY are from the joystick moving the ninja around destRect = new Rect(pointerX, pointerY, pointerX + spriteWidth, pointerY + spriteHeight); canvas.drawBitmap(bitmap, getSourceRect(), destRect, null); The animation is four frames long and gets incremented by 66 (the size of one of the frames on the bitmap) for every frame and then back to 0 at the end of the loop.

    Read the article

  • Touchpad hardware button disables keyboard too

    - by jjg
    I have an old but nice Samsung X50 running MM which has a key between the touchpad buttons which disables the touchpad. Very nice, no-one like to brush against the touchpad while typing. It seems to be a hardware feature -- a BIOS style window appears at the top left of the screen when you press it saying "touchpad off"; and when you press it again it says "touchpad on", and so it is, but now the keyboard has no effect in X, I can type nothing except to meta-ctl F1 to the console. After a reboot the problem persists; and the only way I have found to fix it is to blow away .gconf are replace it with a copy I made in happier times. Deleting/modifying .gconf/desktop/gnome/peripherals/touchpad/%gconf.xml does not fix the problem. There is no way to turn off the switch in BIOS without losing the touchpad. I would prise the thing out with a screwdriver if I could, but it's a work machine. This button is the bane of my life, hanging over me like a sword of Damocles.

    Read the article

  • Screen gets stuck in a dim setting after waking up

    - by Mason Wheeler
    I've got a laptop that I recently upgraded from Vista to Windows 7. It works a lot better now for a lot of things, but there's one problem I've had happen a few times that never happened under Vista. When I put the system to sleep, then occasionally when I wake it up again, for no apparent reason, the screen's dim. Sometimes it's as if half the backlighting was turned off, and sometimes it's as if all the backlighting was turned off, all except for the mouse pointer, which remains as bright white as ever. Trying to change the screen's brightness does nothing, but rebooting fixes this. Has anyone else seen this? Any ideas on what's causing it or how to make it stop happening?

    Read the article

  • 256 SSD / 2TB Internal drive, i7, 16GB RAM.. explorer.exe still slow

    - by web_dvlp_sd
    OK, so I just got done tweaking my brand new PC and explorer.exe still manages to be sluggish not as snappy as I'd like or expected at all. Specs are i7 4th gen processor, 16GB RAM, windows 7 64 home premium on 256GB SSD, secondary internal 2TB drive. I assumed system would be lightning fast, been doing a bunch of researching and switched out a lot of different settings including enabling/disabling indexing, turning pagefile on/off or placing it on separate drive, turning folder optimization options on/off.. changes have been minimal or none at all. Any further advice or anything I might be missing, besides a new/repair install? PC is literally 3 days old I don't feel like I need a new install at all

    Read the article

  • Download - Upload is too slow on Centos

    - by Mehdi
    My download/upload in server and out of server is too slow (around 50 KB/s !) ! Did I miss some configuration ? Some information: CentOS release 6.3 uptime load average: 0.17, 0.32, 0.37 Memory free -m total used free shared buffers cached Mem: 24009 21988 2021 0 806 18098 -/+ buffers/cache: 3083 20926 Swap: 4095 28 4067 lshw -C network *-network description: Ethernet interface product: 82574L Gigabit Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 00 serial: 00:25:90:70:17:4a size: 100MB/s capacity: 1GB/s width: 32 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=off broadcast=yes driver=e1000e driverversion=1.9.5-k duplex=full firmware=2.1-2 ip=108.175.8.123 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:16 memory:fb900000-fb91ffff ioport:e000(size=32) memory:fb920000-fb923fff ethtool ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off MDI-X: off Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000001 (1) Link detected: yes dmesg |grep e1000e dmesg |grep e1000e e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:02:00.0: Disabling ASPM L0s e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:02:00.0: setting latency timer to 64 e1000e 0000:02:00.0: irq 33 for MSI/MSI-X e1000e 0000:02:00.0: irq 34 for MSI/MSI-X e1000e 0000:02:00.0: irq 35 for MSI/MSI-X e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:70:17:4a e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: Unsupported Speed/Duplex configuration e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: Disabling ASPM L1 e1000e 0000:02:00.0: eth0: changing MTU from 1500 to 9000 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO

    Read the article

  • Windows 2008 Incoming Connection: Where/How is Server IPv4 address defined

    - by revelate
    We're evaluating a VM hosted externally which runs Windows Server 2008 R2 Web Server Edition and wish to access it via a VPN connection for maintenance and administration. RRAS isn't included in Web Server Edition, but it does have a form of VPN server called "Incoming Connections". This appears to work well and even supports multiple simultaneous connections. As we'll be using this VPN regularly we'd like to know if this is a viable solution or if we'd be better off upgrading to Standard Edition and full-fledged RRAS. In particular we're accessing the VM via the Private IP given by the Incoming Connection (currently 169.254.135.207) so we'd like know: if the server private IP might change every so often? if so is there any way to define it manually? or should we be using the server name rather than the private IP address? if so how can we be sure that it will resolve correctly? Name resolution over the "Incoming Connection" has worked on and off during our tests. Thanks for your help

    Read the article

  • Are programmers a bunch of heartless robots who are lacking of empathy? [closed]

    - by Graviton
    OK, the provocative title got your attention. My experience as a programmer and dealing with my fellow programmers is that, a programmer is also usually someone who is so consumed by his programming work, so absorbed in his algorithmic construction that he has little passion/ time left for anything else, which includes empathy for other people, love and care for the people whom he love or should love ( such as their spouses, parents, kids, colleagues etc). The better a person is in terms of his programming powers, the more defective he is in terms of love/care because both honing programming skills and loving the surrounding takes time and one has only so much time to be allocated among so many different things. Also, programming ( especially INTERESTING programming job, like, writing an AI to predict the future search trend) is a highly consuming job; it doesn't just consume you from 9 to 5, it will also consume you after 5 and practically every second of your waking hours because a good programmer can't just magically switch off his thinking hat after the office lights go off ( If you can then I don't really think you are a passionate programmer, and the prerequisite of a good programmer is passion). So, a good programmer is necessarily someone who can't love as much as others do because the very nature of the programming job prevents him from loving others as much as he wants to. Do you concur with my observation/ reasoning?

    Read the article

  • Oracle OpenWorld 2012 - Register Now - The Early Bird Gets the Reward

    - by Thanos
    Planning ahead is always a smart move, and it’s never been smarter than now. Register by July 13 for Oracle OpenWorld and save US$500 off the onsite fee. By acting now, you’ll guarantee yourself access to: 2,000-plus sessions Hundreds of demos Dozens of hands-on labs Daily keynote addresses Two vast Exhibition Halls What's more, you'll receive all this for hundreds of dollars less than if you register later. Get an inside line on the latest technology, learn how to optimize your existing systems, and ask questions directly to the strategists and developers responsible for the products you rely on every day to succeed at your company. If you’ve been to Oracle OpenWorld and are planning to attend again, it won’t pay to wait. And if this is your first time, here’s the opening you’ve been waiting for. Register today and save US$500 off the onsite fee. Discounts available to attendees completing registration by July 13, 2012, 11:00 p.m. (Pacific time). Discounts may not be combined with any other promotion, discount, reduced rate, or offer. Only one discount per attendee allowed. The Oracle OpenWorld and JavaOne Emerging Markets pass can be purchased at a discounted rate when attendees register and select countries within the EE, CIS & MEA regions from African Operations (except South Africa), Albania, Armenia, Azerbaijan, Bahrain, Belarus, Bosnia & Herzegovina, Bulgaria, Croatia, Czech Republic, Cyprus, Estonia, Egypt, FYR Macedonia, Georgia, Hungary, Iraq, Jordan, Kazakhstan, Kosoevo (formerly Republic of Yugoslavia), Kuwait, Kyrgyzstan, Latvia, Lebanon, Lithuania, Malta, Moldova, Montenegro, Oman, Palestine, Poland, Qatar, Romania, Russia, Saudi Arabia, Serbia, Slovakia, Slovenia, Tajikistan, Turkey, Turkmenistan, Ukraine, United Arab Emirates, Uzbekistan, and Yemen. Attendees from these countries will need to enter a  priority code as their discount code during the registration process, where they are prompted for a "Priority Code". Please contact your local A&C Manager or email us at partner.imc-AT-beehiveonline.oracle-DOT-com

    Read the article

  • System starts without sound in Lubuntu

    - by cipricus
    When I log in the sound is muted. Why is that? This image is from the Xfce mixer, while the lxde volume does not show that the sound is off. So, I can see the sound muted only in Xfce Mixer. But I can also start the sound in another application, Pulse Audio Volume Control, if I change a setting in Output Devices from Analog Mono Output to LFE on Mono Separate Devices: The Analog Mono Output option here sets in fact the Xfce Mixer in the mute position from the first image. Could this be related to managing sessions (and therefore to these question)? This happens in LXDE session as well as in Lubuntu session. Starting sound and logging out and in between any of these two sessions would mute the volume as shown. Starting the volume in one of these and logging out and then logging in into the Gnome session, the sound would be off; but then, after starting sound, logging out of Gnome and then logging in into any session, the sound would not be muted. But after restart it would be so no matter the session.

    Read the article

  • Hard drive trouble trying to recover data

    - by DEmetria
    How to get my information off my old hard drive to my new one So I wanna know can anyone help me Laptop stop working and have me a hard disk error I finally got it to boot up again after playing with it, and I tried to copy my stuff and it froze on me and hasn't booted since Bought another hard drive and ended up making an image of my friends computer but couldn't get my stuff off my old drive so I tried the freezer method now and I put it in for two hours and it didn't boot but I'm putting it back in for 12hrs So my end result is I just wanna get my drive up enough to create an image of my CPU to my new hard drive and is there another way I could do it if my hard drive won't boot!! But here's the kickers when I made the image of my friends computerized up loaded it to the new hard drive and I have my old hard drive plugged up to an USB enclosure so I need help. Thanks in advance!!!

    Read the article

  • New apache on mac

    - by Keith
    I have installed php5 apache2 mysql5 and postgresql84 using MacPorts. I realize my mac already has apache but it didn't have apache2 nor postgesql hooked up to use with php. I want to not use the default apple apache and use the new macports install. How do I tell my computer to stop looking at the old apache? When I do apachectl in the terminal I believe it is using the old apache. I would like to hook it up to use the new one. How would I do that? The new stuff is installed at /opt/local/apache2 and the old stuff is installed at /private/etc/apache2 I went to system preferences...Sharing...and shut off Web Sharing but when I do apachectl's that turns it on and off in the preferences. I'm running in Snow Leopard.

    Read the article

  • C4C - 2012

    - by Timothy Wright
    C4C, in Kansas City, is always a fun event. At points it gets to be a pressure cooker as you zone in trying to crank out some fantastic code in just a few hours, but it is always fun. A great challenge of your skill as a software developer and for a good cause. This year my team helped The United Cerebral Palsy of Greater Kansas City organization to add online job applications and a database for tracking internal training. I keep finding that there is one key rule to pulling off a successful C4C weekend project, and that is “Keep It Simple”. Each time you want to add that one cool little feature you have to ask yourself.. Is it really necessary? and Do I have time for that? And if you are going to learn something new you should ask yourself if you’re really going to be able to learn that AND finish the project in the given time. Sometimes the less elegant code is the better code if it works. That said… You get a great amount of freedom to build the solution the way you want. Typically, the software we build for the charities will save them a lot of money and time and make their jobs easier. You are able to build the software you know you are capable of creating from your own ideas. I highly recommend any developers in the area to signup next year and show off your skills. I know I will!

    Read the article

  • magento on Zend Server (Win7) installation error

    - by czerasz
    I try to install magento for the first time. I've created the database with the name "project" in my C:\Zend\Apache2\conf\httpd.conf I added on the end: <Directory "C:\Zend\Apche2\htdocs\project"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> in my ZendServer/Server Setup/Extensions: PDO_MySQL, simplexml, mcrypt, hash, GD, DOM, iconv, curl, SOAP are on in C:\Zend\ZendServer\etc\php.ini I set: safe_mode = Off ;<-- was set to off ... memory_limit = 512M; Maximum amount of memory a script may consume (128MB) After step "Configuration" of magento installation (with Use Web Server (Apache) Rewrites enabled) I get: Internal Server Error My database is full of tables (that schould be ok) My Zend Server shows: 27-Oct 06:55 6 Severe Slow Request Execution (Absolute) http://localhost/project/index.php/install/wizard/installDb/ Critical Open 27-Oct 06:55 4 Fatal PHP Error C:\Zend\Apache2\htdocs\project\lib\Varien\Db\Adapter\Pdo\Mysql.php Critical Open 27-Oct 06:55 5 Slow Function Execution curl_exec Warning Open 27-Oct 06:55 5 Slow Request Execution (Absolute) http://localhost/project/index.php/install/wizard/configPost/ What can be wrong?

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >