Search Results

Search found 12330 results on 494 pages for 'old retired dude'.

Page 87/494 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• 6 Reasons Why You Can’t Move Your Cell Phone To Any Carrier You Want

  - by Chris Hoffman

  You can buy a laptop or Wi-Fi tablet and use it on Wi-Fi anywhere in the world, so why are cell phones and devices with mobile data not portable between different cellular networks in the same country? Unlike with Wi-Fi, there are many different competing cellular network standards — both around the world and within countries. Cellular carriers also like locking you to their specific network and making it difficult to move. That’s what contracts are for. Phone Locking Many phones are sold locked to a specific network. When you buy a phone from a cellular carrier, they often lock that phone to their network so you can’t take it to a competitor’s network. That’s why you’ll often need to unlock a phone before you can move it to a different cellular provider or take it to a different country and use it on a local provider instead of roaming. Cellular carriers will generally unlock your phone for you as long as you’re no longer in a contract with them. However, unlocking a cell phone you’ve paid for without your carrier’s permission is currently a crime in the USA. GSM vs. CDMA Some cellular networks use the GSM (Global System for Mobile Communications) standard, while some use CDMA (Code-division multiple access). Worldwide, most cellular networks use GSM. In the USA, both GSM and CDMA are popular. Verizon, Sprint, and other carriers that use their networks use CDMA. AT&T, T-Mobile, and other carriers that use their networks are use GSM. These are two competing standards and are not interoperable. This means you can’t simply take a phone from Verizon to T-Mobile, or from AT&T to Sprint. These carriers have incompatible phones. CDMA Restrictions CDMA is more restricted than GSM. GSM phones have SIM cards. Simply open the phone, pop out the SIM card, and pop in a new SIM card to switch carriers. (In reality, it’s more complicated thanks to phone locking and other factors here.) CDMA phones don’t have removable modules like this. All CDMA phones ship locked to a specific network and you’d have to get both your old carrier and your new carrier to cooperate to switch phones between them. In reality, many people just consider CDMA phones eternally locked to a specific carrier. Frequencies Different cellular networks throughout the USA and the rest of the world use different frequencies. These radio frequencies have to be supported by your phone’s hardware or your phone simply can’t work on a network using those frequencies. Many GSM phones support three or four bands of frequencies — 900/1800/1900 MHz, 850/1800/1900 MHz, or 850/900/1800/1900 MHz. These are sometimes called “world phones” because they allow easier roaming. This allows the manufacturer to produce a phone that will support all GSM networks in the world and allows their customers to travel with those phones. If your phone doesn’t support the appropriate frequencies, it won’t work on certain networks. LTE Bands When it comes to newer, faster LTE networks, different frequencies are still a concern. LTE frequencies are generally known as “LTE bands.” To use a smartphone on a certain LTE network, that smartphone will have to support that LTE network’s frequency. Different models of phones are often created to work on different LTE networks around the world. However, phones are generally supporting more and more LTE networks and becoming more and more interoperable over time. SIM Card Sizes The SIM cards used in GSM phones come in different sizes. Newer phones use smaller SIM cards to save space and be more compact. This isn’t a big obstacle, as the different sizes of SIM cards — full-size SIM, mini-SIM, micro-SIM, and nano-SIM are actually compatible. The only difference between them is the size of the plastic card surrounding the SIM’s chip. The actual chip is the same size between all the SIM cards. This means you can take an old SIM card and cut the plastic off until it becomes a smaller-size SIM card that fits in a modern phone. Or, you can take a smaller-size SIM card and insert it into a tray so that it becomes a larger-size SIM card that fits in an older phone. Be aware that it’s very possible to damage your SIM card and make it not work properly by cutting it to the wrong dimensions. Your cellular carrier will often be able to cut your SIM card for you or give you a new one if you want to use an old SIM card in a new phone. Hopefully they won’t overcharge you for this service, too. Be sure to check what types of networks, frequencies, and LTE bands your phone supports before trying to move it between networks. You may have to buy a new phone when moving between certain cellular carriers. Image Credit: Morgan on Flickr, 22n on Flickr

  Read the article

• SQLAuthority News – Why VoIP Service Providers Should Think About NuoDB’s Geo Distribution

  - by Pinal Dave

  You can always tell when someone’s showing off their cool, cutting edge comms technology. They tend to raise their voice a lot. Back in the day they’d announce their gadget leadership to the rest of the herd by shouting into their cellphone. Usually the message was no more urgent than “Hi, I’m on my cellphone!” Now the same types will loudly name-drop a different technology to the rest of the airport lounge. “I’m leveraging the wifi,” a fellow passenger bellowed, the other day, as we filtered through the departure gate. Nobody needed to know that, but the subtext was “look at me everybody”. You can tell the really advanced mobile user – they tend to whisper. Their handset has a microphone (how cool is that!) and they know how to use it. Sometimes these shouty public broadcasters aren’t even connected anyway because the database for their Voice over IP (VoIP) platform can’t cope. This will happen if they are using a traditional SQL model to try and cope with a phone network which has far flung offices and hundreds of mobile employees. That, like shouting into your phone, is just wrong on so many levels. What VoIP needs now is a single, logical database across multiple servers in different geographies. It needs to be updated in real-time and automatically scaled out during times of peak demand. A VoIP system should scale up to handle increased traffic, but just as importantly is must then go back down in the off peak hours. Try this with a MySQL database. It can’t scale easily enough, so it will keep your developers busy. They’ll have spent many hours trying to knit the different databases together. Traditional relational databases can possibly achieve this, at a price. Mind you, you could extend baked bean cans and string to every point on the network and that would be no less elegant. That’s not really following engineering principles though is it? Having said that, most telcos and VoIP systems use a separate, independent solution for each office location, which they link together – loosely.  The more office locations, the more complex and expensive the solution becomes and so the more you spend on maintenance. Ideally, you’d have a fluid system that can automatically shift its shape as the need arises. That’s the point of software isn’t it – it adapts. Otherwise, we might as well return to the old days. A MySQL system isn’t exactly baked bean cans attached by string, but it’s closer in spirit to the old many teethed mechanical beast that was employed in the first type of automated switchboard. NuoBD’s NewSQL is designed to be a single database that works across multiple servers, which can scale easily, and scale on demand. That’s one system that gives high connectivity but no latency, complexity or maintenance issues. MySQL works in some circumstances, but a period of growth isn’t one of them. So as a company moves forward, the MySQL database can’t keep pace. Data storage and data replication errors creep in. Soon the diaspora of offices becomes a problem. Your telephone system isn’t just distributed, it is literally all over the place. Though voice calls are often a software function, some of the old habits of telephony remain. When you call an engineer out, some of them will listen to what you’re asking for and announce that it cannot be done. This is what happens if you ask, say, database engineers familiar with Oracle or Microsoft to fulfill your wish for a low maintenance system built on a single, fluid, scalable database. No can do, they’d say. In fact, I heard one shouting something similar into his VoIP handset at the airport. “I can’t get on the network, Mac. I’m on MySQL.” You can download NuoDB from here. “NuoDB provides the ability to replicate data globally in real-time, which is not available with any other product offering,” states Weeks.  “That alone is remarkable and it works. I’ve seen it. I’ve used it.  I’ve tested it. The ability to deploy NuoDB removes a tremendous burden from our support and engineering teams.” Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: NuoDB

  Read the article

• I Didn&rsquo;t Get You Anything&hellip;

  - by Bob Rhubart

  Nearly every day this blog features a  list posts and articles written by members of the OTN architect community. But with Christmas just days away, I thought a break in that routine was in order. After all, if the holidays aren’t excuse enough for an off-topic post, then the terrorists have won. Rather than buy gifts for everyone -- which, given the readership of this blog and my budget could amount to a cash outlay of upwards of $15.00 – I thought I’d share a bit of holiday humor. I wrote the following essay back in the mid-90s, for a “print” publication that used “paper” as a content delivery system.  That was then. I’m older now, my kids are older, but my feelings toward the holidays haven’t changed… It’s New, It’s Improved, It’s Christmas! The holidays are a time of rituals. Some of these, like the shopping, the music, the decorations, and the food, are comforting in their predictability. Other rituals, like the shopping, the  music, the decorations, and the food, can leave you curled into the fetal position in some dark corner, whimpering. How you react to these various rituals depends a lot on your general disposition and credit card balance. I, for one, love Christmas. But there is one Christmas ritual that really tangles my tinsel: the seasonal editorializing about how our modern celebration of the holidays pales in comparison to that of Christmas past. It's not that the old notions of how to celebrate the holidays aren't all cozy and romantic--you can't watch marathon broadcasts of "It's A Wonderful White Christmas Carol On Thirty-Fourth Street Story" without a nostalgic teardrop or two falling onto your plate of Christmas nachos. It's just that the loudest cheerleaders for "old-fashioned" holiday celebrations overlook the fact that way-back-when those people didn't have the option of doing it any other way. Dashing through the snow in a one-horse open sleigh? No thanks. When Christmas morning rolls around, I'm going to be mighty grateful that the family is going to hop into a nice warm Toyota for the ride over to grandma's place. I figure a horse-drawn sleigh is big fun for maybe fifteen minutes. After that you’re going to want Old Dobbin to haul ass back to someplace warm where the egg nog is spiked and the family can gather in the flickering glow of a giant TV and contemplate the true meaning of football. Chestnuts roasting on an open fire? Sorry, no fireplace. We've got a furnace for heat, and stuffing nuts in there voids the warranty. Any of the roasting we do these days is in the microwave, and I'm pretty sure that if you put chestnuts in the microwave they would become little yuletide hand grenades. Although, if you've got a snoot full of Yule grog, watching chestnuts explode in your microwave might be a real holiday hoot. Some people may see microwave ovens as a symptom of creeping non-traditional holiday-ism. But I'll bet you that if there were microwave ovens around in Charles Dickens' day, the Cratchits wouldn't have had to entertain an uncharacteristically giddy Scrooge for six or seven hours while the goose cooked. Holiday entertaining is, in fact, the one area that even the most severe critic of modern practices would have to admit has not changed since Tim was Tiny. A good holiday celebration, then as now, involves lots of food, free-flowing drink, and a gathering of friends and family, some of whom you are about as happy to see as a subpoena. Just as the Cratchit's Christmas was spent with a man who, for all they knew, had suffered some kind of head trauma, so the modern holiday gathering includes relatives or acquaintances who, because they watch too many talk shows, and/or have poor personal hygiene, and/or fail to maintain scheduled medication, you would normally avoid like a plate of frosted botulism. But in the season of good will towards men, you smile warmly at the mystery uncle wandering around half-crocked with a clump of mistletoe dangling from the bill of his N.R.A. cap. Dickens' story wouldn't have become the holiday classic it has if, having spotted on their doorstep an insanely grinning, raw poultry-bearing, fresh-off-a-rough-night Scrooge, the Cratchits had pulled their shades and pretended not to be home. Which is probably what I would have done. Instead, knowing full well his reputation as a career grouch, they welcomed him into their home, and we have a touching story that teaches a valuable lesson about how the Christmas spirit can get the boss to pump up the payroll. Despite what the critics might say, our modern Christmas isn't all that different from those of long ago. Sure, the technology has changed, but that just means a bigger, brighter, louder Christmas, with lasers and holograms and stuff. It's our modern celebration of a season that even the least spiritual among us recognizes as a time of hope that the nutcases of the world will wake up and realize that peace on earth is a win/win proposition for everybody. If Christmas has changed, it's for the better. We should continue making Christmas bigger and louder and shinier until everybody gets it.  *** Happy Holidays, everyone!   del.icio.us Tags: holiday,humor Technorati Tags: holiday,humor

  Read the article

• Big Data – What is Big Data – 3 Vs of Big Data – Volume, Velocity and Variety – Day 2 of 21

  - by Pinal Dave

  Data is forever. Think about it – it is indeed true. Are you using any application as it is which was built 10 years ago? Are you using any piece of hardware which was built 10 years ago? The answer is most certainly No. However, if I ask you – are you using any data which were captured 50 years ago, the answer is most certainly Yes. For example, look at the history of our nation. I am from India and we have documented history which goes back as over 1000s of year. Well, just look at our birthday data – atleast we are using it till today. Data never gets old and it is going to stay there forever.  Application which interprets and analysis data got changed but the data remained in its purest format in most cases. As organizations have grown the data associated with them also grew exponentially and today there are lots of complexity to their data. Most of the big organizations have data in multiple applications and in different formats. The data is also spread out so much that it is hard to categorize with a single algorithm or logic. The mobile revolution which we are experimenting right now has completely changed how we capture the data and build intelligent systems.  Big organizations are indeed facing challenges to keep all the data on a platform which give them a  single consistent view of their data. This unique challenge to make sense of all the data coming in from different sources and deriving the useful actionable information out of is the revolution Big Data world is facing. Defining Big Data The 3Vs that define Big Data are Variety, Velocity and Volume. Volume We currently see the exponential growth in the data storage as the data is now more than text data. We can find data in the format of videos, musics and large images on our social media channels. It is very common to have Terabytes and Petabytes of the storage system for enterprises. As the database grows the applications and architecture built to support the data needs to be reevaluated quite often. Sometimes the same data is re-evaluated with multiple angles and even though the original data is the same the new found intelligence creates explosion of the data. The big volume indeed represents Big Data. Velocity The data growth and social media explosion have changed how we look at the data. There was a time when we used to believe that data of yesterday is recent. The matter of the fact newspapers is still following that logic. However, news channels and radios have changed how fast we receive the news. Today, people reply on social media to update them with the latest happening. On social media sometimes a few seconds old messages (a tweet, status updates etc.) is not something interests users. They often discard old messages and pay attention to recent updates. The data movement is now almost real time and the update window has reduced to fractions of the seconds. This high velocity data represent Big Data. Variety Data can be stored in multiple format. For example database, excel, csv, access or for the matter of the fact, it can be stored in a simple text file. Sometimes the data is not even in the traditional format as we assume, it may be in the form of video, SMS, pdf or something we might have not thought about it. It is the need of the organization to arrange it and make it meaningful. It will be easy to do so if we have data in the same format, however it is not the case most of the time. The real world have data in many different formats and that is the challenge we need to overcome with the Big Data. This variety of the data represent  represent Big Data. Big Data in Simple Words Big Data is not just about lots of data, it is actually a concept providing an opportunity to find new insight into your existing data as well guidelines to capture and analysis your future data. It makes any business more agile and robust so it can adapt and overcome business challenges. Tomorrow In tomorrow’s blog post we will try to answer discuss Evolution of Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• DBCC CHECKDB (BatmanDb, REPAIR_ALLOW_DATA_LOSS) &ndash; Are you Feeling Lucky?

  - by David Totzke

  I’m currently working for a client on a PowerBuilder to WPF migration.  It’s one of those “I could tell you, but I’d have to kill you” kind of clients and the quick-lime pits are currently occupied by the EMC tech…but I’ve said too much already. At approximately 3 or 4 pm that day users of the Batman[1] application here in Gotham[1] started to experience problems accessing the application.  Batman[2] is a document management system here that also integrates with the ERP system.  Very little goes on here that doesn’t involve Batman in some way.  The errors being received seemed to point to network issues (TCP protocol error, connection forcibly closed by the remote host etc…) but the real issue was much more insidious. Connecting to the database via SSMS and performing selects on certain tables underlying the application areas that were having problems started to reveal the issue.  You couldn’t do a SELECT * FROM MyTable without it bombing and giving the same error noted above.  A run of DBCC CHECKDB revealed 14 tables with corruption.  One of the tables with issues was the Document table.  Pretty central to a “document management” system.  Information was obtained from IT that a single drive in the SAN went bad in the night.  A new drive was in place and was working fine.  The partition that held the Batman database is configured for RAID Level 5 so a single drive failure shouldn’t have caused any trouble and yet, the database is corrupted.  They do hourly incremental backups here so the first thing done was to try a restore.  A restore of the most recent backup failed so they worked backwards until they hit a good point.  This successful restore was for a backup at 3AM – a full day behind.  This time also roughly corresponds with the time the SAN started to report the drive failure.  The plot thickens… I got my hands on the output from DBCC CHECKDB and noticed a pattern.  What’s sad is that nobody that should have noticed the pattern in the DBCC output did notice.  There was a rush to do things to try and recover the data before anybody really understood what was wrong with it in the first place.  Cooler heads must prevail in these circumstances and some investigation should be done and a plan of action laid out or you could end up making things worse[3].  DBCC CHECKDB also told us that: repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB Yikes.  That means that the database is so messed up that you’re definitely going to lose some stuff when you repair it to get it back to a consistent state.  All the more reason to do a little more investigation into the problem.  Rescuing this database is preferable to having to export all of the data possible from this database into a new one.  This is a fifteen year old application with about seven hundred tables.  There are TRIGGERS everywhere not to mention the referential integrity constraints to deal with.  Only fourteen of the tables have an issue.  We have a good backup that is missing the last 24 hours of business which means we could have a “do-over” of yesterday but that’s not a very palatable option either. All of the affected tables had TEXT columns and all of the errors were about LOB data types and orphaned off-row data which basically means TEXT, IMAGE or NTEXT columns.  If we did a SELECT on an affected table and excluded those columns, we got all of the rows.  We exported that data into a separate database.  Things are looking up.  Working on a copy of the production database we then ran DBCC CHECKDB with REPAIR_ALLOW_DATA_LOSS and that “fixed” everything up.   The allow data loss option will delete the bad rows.  This isn’t too horrible as we have all of those rows minus the text fields from out earlier export.  Now I could LEFT JOIN to the exported data to find the missing rows and INSERT them minus the TEXT column data. We had the restored data from the good 3AM backup that we could now JOIN to and, with fingers crossed, recover the missing TEXT column information.  We got lucky in that all of the affected rows were old and in the end we didn’t lose anything.  :O  All of the row counts along the way worked out and it looks like we dodged a major bullet here. We’ve heard back from EMC and it turns out the SAN firmware that they were running here is apparently buggy.  This thing is only a couple of months old.  Grrr…. They dispatched a technician that night to come and update it .  That explains why RAID didn’t save us. All-in-all this could have been a lot worse.  Given the root cause here, they basically won the lottery in not losing anything. Here are a few links to some helpful posts on the SQL Server Engine blog.  I love the title of the first one: Which part of 'REPAIR_ALLOW_DATA_LOSS' isn't clear? CHECKDB (Part 8): Can repair fix everything? (in fact, read the whole series) Ta da! Emergency mode repair (we didn’t have to resort to this one thank goodness)   Dave Just because I can…   [1] Names have been changed to protect the guilty. [2] I'm Batman. [3] And if I'm the coolest head in the room, you've got even bigger problems...

  Read the article

• Modifying Service URLs with LINQ to Twitter

  - by Joe Mayo

  It’s funny that two posts so close together speak about flexibility with the LINQ to Twitter provider.  There are certain things you know from experience on when to make software more flexible and when to save time.  This is another one of those times when I got lucky and made the right choice up front. I’m talking about the ability to switch URLs. It only makes sense that Twitter should begin versioning their API as it matures.  In fact, most of the entire API has moved to the v1 URL at “https://api.twitter.com/1/”, except for search and trends.  Recently, Twitter introduced the available and local trends, but hung them off the new v1, and left the rest of the trends API on the old URL. To implement this, I muscled my way into the expression tree during CreateRequestProcessor to figure out which trend I was dealing with; perhaps not elegant, but the code is in the right place and that’s what factories are for.  Anyway, the point is that I wouldn’t have to do this kind of stuff (as much fun as it is), if Twitter would have more consistency. Having went to Chirp last week and seeing the evolution of the API, it looks like my wish is coming true.  …now if they would just get their stuff together on the mess they made with geo-location and places… but again, that’s all transparent if your using LINQ to Twitter because I pulled all of that together in a consistent way so that you don’t have to. Normally, when Twitter makes a change, code breaks and I have to scramble to get the fixes in-place.  This time, in the case of a URL change, the adjustment is easy and no-one has to wait for me.  Essentially, all you need to do is change the URL passed to the TwitterContext constructor.  Here’s an example of instantiating a TwitterContext now: using (var twitterCtx = new TwitterContext(auth, "https://api.twitter.com/1/", "https://search.twitter.com/")) The third parameter constructor is the SearchUrl, which is used for Search and Trend APIs. You probably know what’s coming next; another constructor, but with the SearchUrl parameter set to the new URL as follows: using (var twitterCtx = new TwitterContext(auth, "https://api.twitter.com/1/", "https://api.twitter.com/1/")) One consequence of setting the URL this way is that you set the URL for both Trends and Search.  Since Search is still using the old URL, this is going to break for Search queries. You could always instantiate a special TwitterContext instance for Search queries, with the old URL set. Alternatively, you can use the TwitterContext’s SearchUrl property. Here’s an example: twitterCtx.SearchUrl = "https://api.twitter.com/1/"; var trends = (from trend in twitterCtx.Trends where trend.Type == TrendType.Daily && trend.Date == DateTime.Now.AddDays(-2).Date select trend) .ToList(); Notice how I set the SearchUrl property just-in-time for the query. This allows you to target the URL for each specific query. Whichever way you prefer to configure the URL, it’s your choice. So, now you know how to set the URL to be used for Trend queries and how to prevent whacking your Search queries. I’ll be updating the Trend API to use same URL as all other APIs soon, so the only API left to use the SearchUrl will be Search, but for the short term, it’s Trends and Search. Until I make this change, you’ll have a viable work-around by setting the URL yourself, as explained above. These were the Search and Trend URLs, but you might be curious about the second parameter of the TwitterContext constructor; that’s the URL for all other APIs (the BaseUrl), except for Trend and Search. Similarly, you can use the TwitterContext’s BaseUrl property to set the BaseUrl. Setting the BaseUrl can be useful when communicating with other services. In addition to Twitter changing URLs, the Twitter API has been adopted by other companies, such as Identi.ca, Tumblr, and  WordPress.  This capability lets you use LINQ to Twitter with any of these services.  This is a testament to the success of the Twitter API and it’s popularity. No doubt we’ll have hills and valleys to traverse as the Twitter API matures, but hopefully there will be enough flexibility in LINQ to Twitter to make these changes as transparent as possible for you. @JoeMayo

  Read the article

• Are IE9 really good ?

  - by anirudha

  IE9 started a campaign for kill IE6 from the core because they know that IE6 is a big trouble or  problem for them for promote 9 version of IE. so they started a campaign for killing IE6. next time they kill IE 7 , 8,9 whenever they found this old version have a big problem for them to promote next version of IE.   Why they not make a update system who automatically update the browser and tell user to restart and update goes installed in the user system. well IE9 should learn from all other that they have very well design auto-update system who never give user in trouble that your browser goes old. Chrome and Firefox both update themselves and say user restart to enjoy another good version. in IE6 a big problem is that updates. no one sure that they installed new version of IE6 without any hassles and update goes install without any problem because they really know or care about “you need this to install this and this for this” so they thing “why I update IE whenever I am unsure that my browser goes update and I have no problem again” so they do nothing because their work done with no problem because common person used high profile application who work even in IE6. so they do nothing.    IE6 countdown website have designed a banner for warn or force user to upgrade to next version of IE. well there is no good reason for put the banner on website some of reason are:-   Windows 7 comes with pre-installed IE8 and Vista comes with upgrade version them IE6 so that is sure that you force a user who have Windows XP [luna] and if they want to upgrade IE then they can get IE8 not version 9 because IE9 is design for Windows 7 or Vista Service pack 2. so What is the use of update when user still have a outdate version too because IE8 is old version and not have any capability of HTML5 so forcing user by using the banner have no sense. I am not know why they all listed on website put the banner on their own website. it’s good that you offer user what they want instead of giving them a outdate version of IE again. My means to give a user list of browser they can try to enhance their browser experience instead of only IE.   IE9 build upon WPF and they spent more time on using WPF in IE instead of making user experience browser.  many thing is designed wrongly in IE first thing is tabs. the tabs in chrome are bigger and easily to move and same in Firefox even not have smooth tabbing. IE have same tabbing as chrome have but leak a point that it’s too small. if you really  want to move then sometime they create a problem that they going elsewhere from the current instance of IE.   Chrome have a big buttons, tabs and menu to enhance browser experience and Firefox have a good feature that you can make them bigger or small. you can put the icon for add-ons on the toolbar for easily use but IE have no relation with customization so we never can thinking about that.   When chrome provide lot’s of extensions and a  webstore for browser application and same feature in Firefox can be seen then there is no plugin in IE. really you can see their IE addons Website where no plugin listed for web development. even in the category or tag. as a response from many blog there is new for developer that new version of IE9 developer tool. well IE9 have three new tabs a blogger tell on their blog. when I trying them I found many thing but I still unable to edit the Css from the HTML tab and no plugin I found I can get to enhance IE9 web development. something more other provide never IE9 give me like personas , customization , browser extension or any other they used to tell a small thing customization  .   IE9 still have some problem with JavaScript that when I use Firefox and chrome and logout in both then my cookie is deleted but in IE it’s not done. it’s show me that IE9 still have different from other not for good thing even some bad thing too. When I trying to read a article that is written in Hindi using Unicode font I found that they show many thing misspelled. there is three Sha in Hindi but they all goes wrong in IE. the misprint thing is not that the writing  for the articles goes wrong. it’s problem or browser to rendering a font. the Firefox and chrome not give me this problem even opera render the font in italic style by decrease the font-size but all those work perfect.   in Pwn2Own the apple’s safari  and IE9 both are hacked. this is a awesome news for whose who thing that  open-source is lose in  Security and close-source is highly-secured software. well this is not a good parameter for talking about software. it’s should depend how much application tested and used. because more testing and more use of application make them better.   I  appreciate IE to making their new version 9 and good luck for them. there is a another matter that I personally found nothing on them.

  Read the article

• Ops Center 12c - Provisioning Solaris Using a Card-Based NIC

  - by scottdickson

  It's been a long time since last I added something here, but having some conversations this last week, I got inspired to update things. I've been spending a lot of time with Ops Center for managing and installing systems these days.  So, I suspect a number of my upcoming posts will be in that area. Today, I want to look at how to provision Solaris using Ops Center when your network is not connected to one of the built-in NICs.  We'll talk about how this can work for both Solaris 10 and Solaris 11, since they are pretty similar.  In both cases, WANboot is a key piece of the story. Here's what I want to do:  I have a Sun Fire T2000 server with a Quad-GbE nxge card installed.  The only network is connected to port 2 on that card rather than the built-in network interfaces.  I want to install Solaris on it across the network, either Solaris 10 or Solaris 11.  I have met with a lot of customers lately who have a similar architecture.  Usually, they have T4-4 servers with the network connected via 10GbE connections. Add to this mix the fact that I use Ops Center to manage the systems in my lab, so I really would like to add this to Ops Center.  If possible, I would like this to be completely hands free.  I can't quite do that yet. Close, but not quite. WANBoot or Old-Style NetBoot? When a system is installed from the network, it needs some help getting the process rolling.  It has to figure out what its network configuration (IP address, gateway, etc.) ought to be.  It needs to figure out what server is going to help it boot and install, and it needs the instructions for the installation.  There are two different ways to bootstrap an installation of Solaris on SPARC across the network.   The old way uses a broadcast of RARP or more recently DHCP to obtain the IP configuration and the rest of the information needed.  The second is to explicitly configure this information in the OBP and use WANBoot for installation WANBoot has a number of benefits over broadcast-based installation: it is not restricted to a single subnet; it does not require special DHCP configuration or DHCP helpers; it uses standard HTTP and HTTPS protocols which traverse firewalls much more easily than NFS-based package installation.  But, WANBoot is not available on really old hardware and WANBoot requires the use o Flash Archives in Solaris 10.  Still, for many people, this is a great approach. As it turns out, WANBoot is necessary if you plan to install using a NIC on a card rather than a built-in NIC. Identifying Which Network Interface to Use One of the trickiest aspects to this process, and the one that actually requires manual intervention to set up, is identifying how the OBP and Solaris refer to the NIC that we want to use to boot.  The OBP already has device aliases configured for the built-in NICs called net, net0, net1, net2, net3.  The device alias net typically points to net0 so that when you issue the command  "boot net -v install", it uses net0 for the boot.  Our task is to figure out the network instance for the NIC we want to use.  We will need to get to the OBP console of the system we want to install in order to figure out what the network should be called.  I will presume you know how to get to the ok prompt.  Once there, we have to see what networks the OBP sees and identify which one is associated with our NIC using the OBP command show-nets. SunOS Release 5.11 Version 11.0 64-bit Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. {4} ok banner Sun Fire T200, No Keyboard Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.30.4.b, 32640 MB memory available, Serial #69057548. Ethernet address 0:14:4f:1d:bc:c, Host ID: 841dbc0c. {4} ok show-nets a) /pci@7c0/pci@0/pci@2/network@0,1 b) /pci@7c0/pci@0/pci@2/network@0 c) /pci@780/pci@0/pci@8/network@0,3 d) /pci@780/pci@0/pci@8/network@0,2 e) /pci@780/pci@0/pci@8/network@0,1 f) /pci@780/pci@0/pci@8/network@0 g) /pci@780/pci@0/pci@1/network@0,1 h) /pci@780/pci@0/pci@1/network@0 q) NO SELECTION Enter Selection, q to quit: d /pci@780/pci@0/pci@8/network@0,2 has been selected. Type ^Y ( Control-Y ) to insert it in the command line. e.g. ok nvalias mydev ^Y for creating devalias mydev for /pci@780/pci@0/pci@8/network@0,2 {4} ok devalias ... net3 /pci@7c0/pci@0/pci@2/network@0,1 net2 /pci@7c0/pci@0/pci@2/network@0 net1 /pci@780/pci@0/pci@1/network@0,1 net0 /pci@780/pci@0/pci@1/network@0 net /pci@780/pci@0/pci@1/network@0 ... name aliases By looking at the devalias and the show-nets output, we can see that our Quad-GbE card must be the device nodes starting with  /pci@780/pci@0/pci@8/network@0.  The cable for our network is plugged into the 3rd slot, so the device address for our network must be /pci@780/pci@0/pci@8/network@0,2. With that, we can create a device alias for our network interface.  Naming the device alias may take a little bit of trial and error, especially in Solaris 11 where the device alias seems to matter more with the new virtualized network stack. So far in my testing, since this is the "next" network interface to be used, I have found success in naming it net4, even though it's a NIC in the middle of a card that might, by rights, be called net6 (assuming the 0th interface on the card is the next interface identified by Solaris and this is the 3rd interface on the card).  So, we will call it net4.  We need to assign a device alias to it: {4} ok nvalias net4 /pci@780/pci@0/pci@8/network@0,2 {4} ok devalias net4 /pci@780/pci@0/pci@8/network@0,2 ... We also may need to have the MAC for this particular interface, so let's get it, too.  To do this, we go to the device and interrogate its properties. {4} ok cd /pci@780/pci@0/pci@8/network@0,2 {4} ok .properties assigned-addresses 82060210 00000000 03000000 00000000 01000000 82060218 00000000 00320000 00000000 00008000 82060220 00000000 00328000 00000000 00008000 82060230 00000000 00600000 00000000 00100000 local-mac-address 00 21 28 20 42 92 phy-type mif ... From this, we can see that the MAC for this interface is  00:21:28:20:42:92.  We will need this later. This is all we need to do at the OBP.  Now, we can configure Ops Center to use this interface. Network Boot in Solaris 10 Solaris 10 turns out to be a little simpler than Solaris 11 for this sort of a network boot.  Since WANBoot in Solaris 10 fetches a specified In order to install the system using Ops Center, it is necessary to create a OS Provisioning profile and its corresponding plan.  I am going to presume that you already know how to do this within Ops Center 12c and I will just cover the differences between a regular profile and a profile that can use an alternate interface. Create a OS Provisioning profile for Solaris 10 as usual.  However, when you specify the network resources for the primary network, click on the name of the NIC, probably GB_0, and rename it to GB_N/netN, where N is the instance number you used previously in creating the device alias.  This is where the trial and error may come into play.  You may need to try a few instance numbers before you, the OBP, and Solaris all agree on the instance number.  Mark this as the boot network. For Solaris 10, you ought to be able to then apply the OS Provisioning profile to the server and it should install using that interface.  And if you put your cards in the same slots and plug the networks into the same NICs, this profile is reusable across multiple servers. Why This Works If you watch the console as Solaris boots during the OSP process, Ops Center is going to look for the device alias netN.  Since WANBoot requires a device alias called just net, Ops Center uses the value of your netN device alias and assigns that device to the net alias.  That means that boot net will automatically use this device.  Very cool!  Here's a trace from the console as Ops Center provisions a server: Sun Sun Fire T200, No KeyboardCopyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.OpenBoot 4.30.4.b, 32640 MB memory available, Serial #69057548.Ethernet address 0:14:4f:1d:bc:c, Host ID: 841dbc0c.auto-boot? =            false{0} ok  {0} ok printenv network-boot-argumentsnetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok devalias net net                      /pci@780/pci@0/pci@1/network@0{0} ok devalias net4 net4                     /pci@780/pci@0/pci@8/network@0,2{0} ok devalias net /pci@780/pci@0/pci@8/network@0,2{0} ok setenv network-boot-arguments host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:8004/cgi-bin/wanboot-cginetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:8004/cgi-bin/wanboot-cgi{0} ok {0} ok boot net - installBoot device: /pci@780/pci@0/pci@8/network@0,2  File and args: - install/pci@780/pci@0/pci@8/network@0,2: 1000 Mbps link up<time unavailable> wanboot info: WAN boot messages->console<time unavailable> wanboot info: configuring /pci@780/pci@0/pci@8/network@0,2 See what happened?  Ops Center looked for the network device alias called net4 that we specified in the profile, took the value from it, and made it the net device alias for the boot.  Pretty cool! WANBoot and Solaris 11 Solaris 11 requires an additional step since the Automated Installer in Solaris 11 uses the MAC address of the network to figure out which manifest to use for system installation.  In order to make sure this is available, we have to take an extra step to associate the MAC of the NIC on the card with the host.  So, in addition to creating the device alias like we did above, we also have to declare to Ops Center that the host has this new MAC. Declaring the NIC Start out by discovering the hardware as usual.  Once you have discovered it, take a look under the Connectivity tab to see what networks it has discovered.  In the case of this system, it shows the 4 built-in networks, but not the networks on the additional cards.  These are not directly visible to the system controller.  In order to add the additional network interface to the hardware asset, it is necessary to Declare it.  We will declare that we have a server with this additional NIC, but we will also  specify the existing GB_0 network so that Ops Center can associate the right resources together.  The GB_0 acts as sort of a key to tie our new declaration to the old system already discovered.  Go to the Assets tab, select All Assets, and then in the Actions tab, select Add Asset.  Rather than going through a discovery this time, we will manually declare a new asset. When we declare it, we will give the hostname, IP address, system model that match those that have already been discovered.  Then, we will declare both GB_0 with its existing MAC and the new GB_4 with its MAC.  Remember that we collected the MAC for GB_4 when we created its device alias. After you declare the asset, you will see the new NIC in the connectivity tab for the asset.  You will notice that only the NICs you listed when you declared it are seen now.  If you want Ops Center to see all of the existing NICs as well as the additional one, declare them as well.  Add the other GB_1, GB_2, GB_3 links and their MACs just as you did GB_0 and GB_4.  Installing the OS  Once you have declared the asset, you can create an OS Provisioning profile for Solaris 11 in the same way that you did for Solaris 10.  The only difference from any other provisioning profile you might have created already is the network to use for installation.  Again, use GB_N/netN where N is the interface number you used for your device alias and in your declaration.  And away you go.  When the system boots from the network, the automated installer (AI) is able to see which system manifest to use, based on the new MAC that was associated, and the system gets installed. {0} ok {0} ok printenv network-boot-argumentsnetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok devalias net net                      /pci@780/pci@0/pci@1/network@0{0} ok devalias net4 net4                     /pci@780/pci@0/pci@8/network@0,2{0} ok devalias net /pci@780/pci@0/pci@8/network@0,2{0} ok setenv network-boot-arguments host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cginetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok boot net - installBoot device: /pci@780/pci@0/pci@8/network@0,2  File and args: - install/pci@780/pci@0/pci@8/network@0,2: 1000 Mbps link up<time unavailable> wanboot info: WAN boot messages->console<time unavailable> wanboot info: configuring /pci@780/pci@0/pci@8/network@0,2...SunOS Release 5.11 Version 11.0 64-bitCopyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.Remounting root read/writeProbing for device nodes ...Preparing network image for useDownloading solaris.zlib--2012-02-17 15:10:17--  http://10.140.204.22:5555/var/js/AI/sparc//solaris.zlibConnecting to 10.140.204.22:5555... connected.HTTP request sent, awaiting response... 200 OKLength: 126752256 (121M) [text/plain]Saving to: `/tmp/solaris.zlib'100%[======================================>] 126,752,256 28.6M/s   in 4.4s    2012-02-17 15:10:21 (27.3 MB/s) - `/tmp/solaris.zlib' saved [126752256/126752256] Conclusion So, why go to all of this trouble?  More and more, I find that customers are wiring their data center to only use higher speed networks - 10GbE only to the hosts.  Some customers are moving aggressively toward consolidated networks combining storage and network on CNA NICs.  All of this means that network-based provisioning cannot rely exclusively on the built-in network interfaces.  So, it's important to be able to provision a system using other than the built-in networks.  Turns out, that this is pretty straight-forward for both Solaris 10 and Solaris 11 and fits into the Ops Center deployment process quite nicely. Hopefully, you will be able to use this as you build out your own private cloud solutions with Ops Center.

  Read the article

• Designing for the future

  - by Dennis Vroegop

  User interfaces and user experience design is a fast moving field. It’s something that changes pretty quick: what feels fresh today will look outdated tomorrow. I remember the day I first got a beta version of Windows 95 and I felt swept away by the user interface of the OS. It felt so modern! If I look back now, it feels old. Well, it should: the design is 17 years old which is an eternity in our field. Of course, this is not limited to UI. Same goes for many industries. I want you to think back of the cars that amazed you when you were in your teens (if you are in your teens then this may not apply to you). Didn’t they feel like part of the future? Didn’t you think that this was the ultimate in designs? And aren’t those designs hopelessly outdated today (again, depending on your age, it may just be me)? Let’s review the Win95 design: And let’s compare that to Windows 7: There are so many differences here, I wouldn’t even know where to start explaining them. The general feeling however is one of more usability: studies have shown Windows 7 is much easier to understand for new users than the older versions of Windows did. Of course, experienced Windows users didn’t like it: people are usually afraid of changes and like to stick to what they know. But for new users this was a huge improvement. And that is what UX design is all about: make a product easier to use, with less training required and make users feel more productive. Still, there are areas where this doesn’t hold up. There are plenty examples of designs from the past that are still fresh today. But if you look closely at them, you’ll notice some subtle differences. This differences are what keep the designs fresh. A good example is the signs you’ll find on the road. They haven’t changed much over the years (otherwise people wouldn’t recognize them anymore) but they have been changing gradually to reflect changes in traffic. The same goes for computer interfaces. With each new product or version of a product, the UI and UX is changed gradually. Every now and then however, a bigger change is needed. Just think about the introduction of the Ribbon in Microsoft Office 2007: the whole UI was redesigned. A lot of old users (not in age, but in times of using older versions) didn’t like it a bit, but new users or casual users seem to be more efficient using the product. Which, of course, is exactly the reason behind the changes. I believe that a big engine behind the changes in User Experience design has been the web. In the old days (i.e. before the explosion of the internet) user interface design in Windows applications was limited to choosing the margins between your battleship gray buttons. When the web came along, and especially the web 2.0 where the browsers started to act more and more as application platforms, designers stepped in and made a huge impact. In the browser, they could do whatever they wanted. In the beginning this was limited to the darn blink tag but gradually people really started to think about UX. Even more so: the design of the UI and the whole experience was taken away from the developers and put into the hands of people who knew what they were doing: UX designers. This caused some problems. Everyone who has done a web project in the early 2000’s must have had the same experience: the designers give you a set of Photoshop files and tell you to translate it to HTML. Which, of course, is very hard to do. However, with new tooling and new standards this became much easier. The latest version of HTML and CSS has taken the responsibility for the design away from the developers and placed them in the capable hands of the designers. And that’s where that responsibility belongs, after all, I don’t want a designer to muck around in my c# code just as much as he or she doesn’t want me to poke in the sites style definitions. This change in responsibilities resulted in good looking but more important: better thought out user interfaces in websites. And when websites became more and more interactive, people started to expect the same sort of look and feel from their desktop applications. But that didn’t really happen. Most business applications still have that battleship gray look and feel. Ok, they may use a different color but we’re not talking colors here but usability. Now, you may not be able to read the Dutch captions, but even if you did you wouldn’t understand what was going on. At least, not when you first see it. You have to scan the screen, read all the labels, see how they are related to the other elements on the screen and then figure out what they do. If you’re an experienced user of this application however, this might be a good thing: you know what to do and you get all the information you need in one single screen. But for most applications this isn’t the case. A lot of people only use their computer for a limited time a day (a weird concept for me, but it happens) and need it to get something done and then get on with their lives. For them, a user interface experience like the above isn’t working. (disclaimer: I just picked a screenshot, I am not saying this is bad software but it is an example of about 95% of the Windows applications out there). For the knowledge worker, this isn’t a problem. They use one or two systems and they know exactly what they need to do to achieve their goal. They don’t want any clutter on their screen that distracts them from their task, they just want to be as efficient as possible. When they know the systems they are very productive. The point is, how long does it take to become productive? And: could they be even more productive if the UX was better? Are there things missing that they don’t know about? Are there better ways to achieve what they want to achieve? Also: could a system be designed in such a way that it is not only much more easy to work with but also less tiring? in the example above you need to switch between the keyboard and mouse a lot, something that we now know can be very tiring. The goal of most applications (being client apps or websites on any kind of device) is to provide information. Information is data that when given to the right people, on the right time, in the right place and when it is correct adds value for that person (please, remember that definition: I still hear the statement “the information was wrong” which doesn’t make sense: data can be wrong, information cannot be). So if a system provides data, how can we make sure the chances of becoming information is as high as possible? A good example of a well thought-out system that attempts this is the Zune client. It is a very good application, and I think the UX is much better than it’s main competitor iTunes. Have a look at both: On the left you see the iTunes screenshot, on the right the Zune. As you notice, the Zune screen has more images but less chrome (chrome being visuals not part of the data you want to show, i.e. edges around buttons). The whole thing is text oriented or image oriented, where that text or image is part of the information you need. What is important is big, what’s less important is smaller. Yet, everything you need to know at that point is present and your attention is drawn immediately to what you’re trying to achieve: information about music. You can easily switch between the content on your machine and content on your Zune player but clicking on the image of the player. But if you didn’t know that, you’d find out soon enough: the whole UX is designed in such a way that it invites you to play around. So sooner or later (probably sooner) you’d click on that image and you would see what it does. In the iTunes version it’s harder to find: the discoverability is a lot lower. For inexperienced people the Zune player feels much more natural than the iTunes player, and they get up to speed a lot faster. How does this all work? Why is this UX better? The answer lies in a project from Microsoft with the codename (it seems to be becoming the official name though) “Metro”. Metro is a design language, based on certain principles. When they thought about UX they took a good long look around them and went out in search of metaphors. And they found them. The team noticed that signage in streets, airports, roads, buildings and so on are usually very clear and very precise. These signs give you the information you need and nothing more. It’s simple, clearly understood and fast to understand. A good example are airport signs. Airports can be intimidating places, especially for the non-experienced traveler. In the early 1990’s Amsterdam Airport Schiphol decided to redesign all the signage to make the traveller feel less disoriented. They developed a set of guidelines for signs and implemented those. Soon, most airports around the world adopted these ideas and you see variations of the Dutch signs everywhere on the globe. The signs are text-oriented. Yes, there are icons explaining what it all means for the people who can’t read or don’t understand the language, but the basic sign language is text. It’s clear, it’s high-contrast and it’s easy to understand. One look at the sign and you know where to go. The only thing I don’t like is the green sign pointing to the emergency exit, but since this is the default style for emergency exits I understand why they did this. If you look at the Zune UI again, you’ll notice the similarities. Text oriented, little or no icons, clear usage of fonts and all the information you need. This design language has a set of principles: Clean, light, open and fast Content, not chrome Soulful and alive These are just a couple of the principles, you can read the whole philosophy behind Metro for Windows Phone 7 here. These ideas seem to work. I love my Windows Phone 7. It’s easy to use, it’s clear, there’s no clutter that I do not need. It works for me. And I noticed it works for a lot of other people as well, especially people who aren’t as proficient with computers as I am. You see these ideas in a lot other places. Corning, a manufacturer of glass, has made a video of possible usages of their products. It’s their glimpse into the future. You’ll notice that a lot of the UI in the screens look a lot like what Microsoft is doing with Metro (not coincidentally Corning is the supplier for the Gorilla glass display surface on the new SUR40 device (or Surface v2.0 as a lot of people call it)). The idea behind this vision is that data should be available everywhere where you it. Systems should be available at all times and data is presented in a clear and light manner so that you can turn that data into information. You don’t need a lot of fancy animations that only distract from the data. You want the data and you want it fast. Have a look at this truly inspiring video that made: This is what I believe the future will look like. Of course, not everything is possible, or even desirable. But it is a nice way to think about the future . I feel very strongly about designing applications in such a way that they add value to the user. Designing applications that turn data into information. Applications that make the user feel happy to use them. So… when are you going to drop the battleship-gray designs? Tags van Technorati: surface,design,windows phone 7,wp7,metro

  Read the article

• CodePlex Daily Summary for Wednesday, July 31, 2013

  CodePlex Daily Summary for Wednesday, July 31, 2013Popular ReleasesSharePoint 2010 Export User Information to Text file, SQL server: Full Source code of the project: Please change SharePoint server address. I have used my sharepoint server -> http://sneakpreviewWINJS CTK (Control Toolkit): Initial Release: Initial release supports the following. Expander NumericBoxXMLPreprocess: 2.0.18: What's new in this release For XML Spreadsheet 2003 format, used the frozen row at the top of the worksheet to indicate the beginning of the values. This prevents you from having to start your values at row 7. This can be overridden with the /firstValueRow (or /vr) argument. Issues Fixed Fix for Issue 13006 : Corrected default treatment of the value "false" Beginning with this version, the FixFalse behavior that has caused confusion to so many, has hopefully been addressed in a way that st...MVVM.EventToCommand: Tommy.MVVM.EventToCommand: Tommy.MVVM.EventToCommand is a free, open source developer focused event2command via WinRT for MVVM Pattern.MVC Generator: MVC Generator Visual Studio Addin: This is the latest build, this includes the MVCGenerator.dll, and Visual Studio Addin file. See the home page of this project for installation instructions.Project Nonnon: 2013_07_30: ----------==========----------==========----------==========---------- "No news is good news." ----------==========----------==========----------==========---------- Change Log 2013/07/30 BUGFIX game/sound/directsound.c n_directsound_loop() OLD : crash when DirectSound is not supported NEW : fixed game/sound/waveout.c when included OLD : compile error NEW : fixed game/chara.c when included OLD : compile error NEW : fixed game/direct2d.c when included ...Dynamics CRM 2011 EasyPlugins: EasyPlugins-1.2.3.1-managed: V1.2.3.1 - Bug Fix : Condition expression is not saved on action creation - Bug Fix : Request Param with single attribute result - Some style changes v1.2.3.0 - Bug Fix : Twice plugins execution. - New Abort action - Depth Plugin Execution management on each action - Turn On/Off EasyPlugins feature (can be useful in some cases of imports) v1.2.0.0 Associate / Disassociate actions are now available Import / Export features Better management of Lookups Trigger NamingXmlObjectMapper: XOM Alpha 1.0: first Alpha Version of XOM: read and write xml nodes and attributes mapping to IList or Interfaces simple property attribute mapping creates new xml nodes at run time IList changes (add, remove) implemented in the next releasenopCommerce. Open source shopping cart (ASP.NET MVC): nopCommerce 3.10: Highlight features & improvements: • Performance optimization. • New more user-friendly product/product-variant logic. Now we'll have only products (simple and grouped). • Bundle products support added. • Allow a store owner to associate product image for product variant attribute values. To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).ExtJS based ASP.NET Controls: FineUI v3.3.1: ??FineUI ?? ExtJS ??? ASP.NET ???。 FineUI??? ?? No JavaScript，No CSS，No UpdatePanel，No ViewState，No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License v2.0 ?：ExtJS ?? GPL v3 ?????(http://www.sencha.com/license)。 ???? ??：http://fineui.com/bbs/ ??：http://fineui.com/demo/ ??：http://fineui.com/doc/ ??：http://fineui.codeplex.com/ FineUI ???? ExtJS ????????，???? ExtJS ?，???????????ExtJS?： 1. ????? FineUI ? ExtJS ?：http://fineui.com/bbs/fo...AutoNLayered - Domain Oriented N-Layered .NET 4.5: AutoNLayered v1.0.5: - Fix Dtos. Abstract collections replaced by concrete (correct serialization WCF). - OrderBy in navigation properties. - Unit Test with Fakes. - Map of entities/dto moved to application services. - Libraries updated. Warning using Fakes: http://connect.microsoft.com/VisualStudio/feedback/details/782031/visual-studio-2012-add-fakes-assembly-does-not-add-all-needed-referencesPath Copy Copy: 11.1: Minor release with two new features: Submenu's contextual menu item now has an icon next to it Added reference to JavaScript regular expression format in Settings application Since this release does not have any glaring bug fixes, it is more of an optional update for existing users. It depends on whether you want to be able to spot the Path Copy Copy submenu more easily. I recommend you install it to see if the icon makes sense. As always, please don't hesitate to leave feedback via Discus...CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.0 RC3: This is the third release candidate of CMake Tools for Visual Studio 1.0, which contains the following bug fixes: Opening a CMake file from Windows Explorer while Visual Studio is already open will no start a new instance of Visual Studio. Typing a symbol while the IntelliSense list box is visible and the text typed so far does not match any item in the list will dismiss the list box and insert the symbol typed.R.NET: R.NET 1.5: The major changes in v1.5 are: Initialize method must be called before using R. Settings should be passed to the method. EagerEvaluate method renamed to Evaluate (use Defer method when you want old version of Evaluate).Media Companion: Media Companion MC3.574b: Some good bug fixes been going on with the new XBMC-Link function. Thanks to all who were able to do testing and gave feedback. New:* Added some adhoc extra General movie filters, one of which is Plot = Outline (see fixes above). To see the filters, add the following line to your config.xml: <ShowExtraMovieFilters>True</ShowExtraMovieFilters>. The others are: Imdb in folder name, Imdb in not folder name & Imdb not in folder name & year mismatch. * Movie - display <tag> list on browser tab ...OfflineBrowser: Preview Release with Search: I've added search to this release.VG-Ripper & PG-Ripper: VG-Ripper 2.9.46: changes FIXED LoginMath.NET Numerics: Math.NET Numerics v2.6.0: What's New in Math.NET Numerics 2.6 - Announcement, Explanations and Sample Code. New: Linear Curve Fitting Linear least-squares fitting (regression) to lines, polynomials and linear combinations of arbitrary functions. Multi-dimensional fitting. Also works well in F# with the F# extensions. New: Root Finding Brent's method. ~Candy Chiu, Alexander Täschner Bisection method. ~Scott Stephens, Alexander Täschner Broyden's method, for multi-dimensional functions. ~Alexander Täschner ...AJAX Control Toolkit: July 2013 Release: AJAX Control Toolkit Release Notes - July 2013 Release Version 7.0725July 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can be found at...MJP's DirectX 11 Samples: Specular Antialiasing Sample: Sample code to complement my presentation that's part of the Physically Based Shading in Theory and Practice course at SIGGRAPH 2013, entitled "Crafting a Next-Gen Material Pipeline for The Order: 1886". Demonstrates various methods of preventing aliasing from specular BRDF's when using high-frequency normal maps. The zip file contains source code as well as a pre-compiled x64 binary.New ProjectsA Simple Java Encryption program: This is my very first Java project. It's a file encryptor. It's purpose is to codify a file to make it look like it contain random information.AA??: aa??，????。Browser Chooser 2: Browser Chooser 2 is an updated fork of the original. It's primary goal is to simplify using multiple browser.campuscloud-mobile: Dieses Projekt enthält die mobilen Apps zur Campuscloud App.campuscloud-owncloudplugins: Dieses Projekt enthält die ownCloud-Plugins zu den CampuCloud-Apps, die ownCloud-Server um weitere Funktionalitäten ergänzen.campuscloud-windowsphone8: Diese Projekt enthält die Windows Phone 8 App zur Campuscloud App.Chronos .Net Performance Profiler: Free .Net Performance ProfilerConvertServer: a pet project i works onDevelopment Tools for Solid Edge: Development tools for Solid Edge.DocAssist: The project is to facilitate user's day-to-day management of her files in a customisable way on Windows System equipped with .NET framework.epe: epeETP 3: prueba de asp mvc para desarrollar conjuntamente en un repositorio tfsHello World in MVC4: Application to testInvoke-MsTest PowerShell Module: A PowerShell module that makes unit testing Visual Studio projects fast and easy. Uses MsTest.exe to launch all test associated with your project or solution.MarathonTP: MarathonTP (TP stands for Transport Protocol) is a lightweight communication protocol specificaly developped for machine to machine communication.Multicopter Simulator: A simulation environment for multicopter built with Microsoft Robotics Developer Studio 4.MVC Rags: A bunch of ASP.NET MVC4 helpersMVVM.EventToCommand: Tommy.MVVM.EventToCommand is a free, open source developer focused event2command via WinRT for MVVM Pattern.RNT.Common: rnt.commonStorageOrizer: Software to manage disk space, e.g. move Programs without damaging function. Subset Sum Problem Solver: SubsetThirdPartyLogin: ?????twitterBootstrapAspNetMVCControls: Asp.net MVC Controls based on twiiter Boostrap( a beautiful html & css framework published by Twitter).Unify: Unify is an automatic IoC Container Configurator, based on layers approach via annotations.V32 Assembler: The assembler for my assembly language for my 32-bit virtual machine with a home-made instruction set.

  Read the article

• Salt River Project Identifies US$500,000 in Cost Reduction Opportunities Through Unified IT Portfolio Management

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Salt River Project (SRP) includes two entities serving the Phoenix area: the Salt River Project Agricultural Improvement and Power District and the Salt River Valley Water Users’ Association. The SRP district operates various power plants and generating stations to provide electricity to nearly 956,000 retail customers. The SRP association maintains an extensive system of reservoirs, wells, and irrigation laterals to deliver nearly 1 million acre-feet of water annually. Salt River Project implemented Oracle’s Primavera Portfolio Management to unify management of its extensive IT portfolio, including essential utility systems, like work and asset management, as well as programming frameworks and development tools. With the system, SRP discovered almost US$500,000 in cost-reduction opportunities by identifying redundant or low use software, including 150 applications that are close to being unsupported. The company retired 10 applications in the last year and upgraded 34 systems. SRP also identified preferred technologies and ensured that more than 90% of applications are based on standard technologies—reducing procurement costs, simplifying maintenance support, and lowering total cost of ownership. Solutions: Provided approximately 70 users in the IT support group with detailed insight into the product lifecycle of each piece of IT infrastructure and software in the entire portfolio Discovered almost US$500,000 in cost reduction opportunities by identifying redundant or low use software that could be eliminated or migrated to alternative solutions Identified approximately 150 applications that are close to being unsupported and prioritized them to begin modernization Click here to view more Oracle Primavera Portfolio Management solutions for SRP. Why Oracle Salt River Project chose Oracle’s Primavera Portfolio Management after evaluating it against four other solutions. “Oracle’s Primavera Portfolio Management offered the most functionality to support our diverse needs,” said Eileen Ahles, IT portfolio manager, Salt River Project. Read the complete customer success story Access a list of all Primavera customer success stories

  Read the article

• jquery Setting cursor position in contenteditable div

  - by Mark

  The old version of the question is below, after researching more, I decided to rephrase the question. The problem as before is, I need to focus a contenteditable div without highlighting the text, doing straight up focus highlights the text in Chrome. I realize that people solved this problems in textareas by resetting the caret position in the textarea. How can I do that with a contenteditable element? All the plugins I've tried only works with textareas. Thanks. Old Phrasing of the question: I have a contenteditable element that I want to focus, but only insofar as to place the cursor at the front of the element, rather selecting everything. elem.trigger('focus'); with jquery selects all the text in the entire element in chrome. Firefox behaves correctly, setting the caret at the front of the text. How can I get Chrome to behave the way I want, or is focus perhaps not what I'm looking for. Thanks

  Read the article

• SAP DCOM Connector on Windows Server 2008

  - by Michael

  Does anybody know, if it is possible to use the "old" SAP DCOM Connector on a Windows Server 2008 ? I want to migrate a old ASP Web Solution with DCOM Connection to SAP from Windows 2000 Server to Windows 2008 Server. When I try to install the DCOM Connector I get the Error Message: "Setup could not find ActivX(R) Data Objects verion 2.5 or higher on your computer...." That is strange, because ado is there under C:\Program Files\Common Files\System\ado ! Thanks in advance for your help !

  Read the article

• TFS - Rebinding solution to new TFS when prior TFS no longer available

  - by MikeMalter

  The prior instance of TFS I was using is no longer available and I have a test project I want to bind to the new instance of TFS. However, when I try to add the solution to source control, the error message tells me that the collection is not available on the server. I have deleted all old source control files, and it still has the old bindings somewhere. Does anyone know how to remove ALL bindings so I can just simply start over again with a new instance of TFS? Thanks.

  Read the article

• trying to convert rails 2.3.4 app to rails 3 but views not appearing

  - by kgrad

  I have a simple rails 2.3.4 application I am trying to get running with rails 3.0.0-beta2. I have the server running and all my links and navigation showing, however for some reason the content of my views is not displaying. When I navigate to Site/index the html in my index.html.erb in my site view is completely ignored. There are no errors in the server log. My template is rendered properly (where all the links and navigation are being created) within application.html.erb however all of my actual view files are being ignored. Has anyone experienced this? I am using old style routing with map.connect, could this be the issue? Does anyone have a tutorial on how to convert old routes to new ones? I couldn't figure it out. my current routes look like this: map.connect ':controller/:action/:id' map.connect ':controller/:action/:id.:format' map.root :controller => :site, :action => :index

  Read the article

• Force SSRS 2008 to use SSRS 2005 CSV rendering

  - by Kash

  We are upgrading our report server from SSRS 2005 to SSRS 2008 R2. I have an issue with CSV export rendering for SSRS 2008 where the SUM of columns are appearing on the right side of the detail values in 2008 instead of the left side like in 2005 as shown in the below blocks. 117 and 131 are the sums of Column2 and Column3 respectively. SSRS 2005 CSV Output Column2_1,Column3_1,Column2,Column3 117,131,1,2 117,131,1,2 117,131,60,23 117,131,30,15 117,131,25,89 SSRS 2008 CSV Output Column2,Column3,Column2_1,Column3_1 1,2,117,131 1,2,117,131 60,23,117,131 30,15,117,131 25,89,117,131 I understand that the CSV renderer has gone through major changes in SSRS 2008 R2 with the support for charts and gauges and more importantly it provides 2 modes: the default Excel mode and Compliant mode. But neither mode helps fix this issue. The Compliant mode was supposed to be closest to that of 2005 but apparently it is not close enough for my case. My Question: Is there a way to force SSRS 2008 fall back a report to a backward compatibility mode so that it exports into a 2005 CSV format? Solution tried: a) Using 2005-based CRIs Based on this article on ExecutionLog2, if SSRS 2008 R2 encounters a report whose auto-upgrade is not possible (e.g. reports that were built with 2005-based CustomReportItem controls), those particular reports will be processed with the old Yukon engine in a "transparent backwards-compatibility mode". It seems like it falls back to its previous version mode (2005) and attempts to render it. So I tried using a 2005-based barcode CustomReportItem and deployed to a SSRS 2008 R2 report server, but it shows the same result as before though it suppressed the barcode. This would be because SSRS 2008 R2 finds a way to suppress part of the report output and displays the rest. It would be great to find a 2005-based CRI that makes SSRS 2008 R2 process it with its old Yukon engine. Please note that quite possibly, even if it uses the "old Yukon processing engine", it might still use the new CSV renderer hence it shows the same output. If that is true, then this option is moot. b) Using XML renderer We can use a custom XML renderer and then use XSLT to convert the xml to appropriate CSV but this would mean that we need to convert all our 200 reports. Hence this is not feasible. Please note that we do not have the option of having SSRS 2005 and SSRS 2008 R2 deployed side by side.

  Read the article

• How to fix these compiler errors?

  - by Sandra Schlichting

  I have this source code from 2001 that I would like to compile. It gives this: $ make g++ -O99 -Wall -DLINUX -pedantic -c -o audio.o audio.cpp In file included from audio.cpp:7: audio.h:14: error: use of enum ‘mad_flow’ without previous declaration audio.h:15: error: use of enum ‘mad_flow’ without previous declaration audio.h:17: error: use of enum ‘mad_flow’ without previous declaration audio.cpp: In function ‘mad_flow audio::input(void*, mad_stream*)’: audio.cpp:19: error: new declaration ‘mad_flow audio::input(void*, mad_stream*)’ audio.h:14: error: ambiguates old declaration ‘int audio::input(void*, mad_stream*)’ audio.h:11: error: ‘size_t audio::stream::BufferPos’ is private audio.cpp:23: error: within this context audio.h:11: error: ‘size_t audio::stream::BufferSize’ is private audio.cpp:23: error: within this context audio.h:10: error: ‘char* audio::stream::Buffer’ is private audio.cpp:26: error: within this context audio.h:11: error: ‘size_t audio::stream::BufferSize’ is private audio.cpp:26: error: within this context audio.h:11: error: ‘size_t audio::stream::BufferPos’ is private audio.cpp:27: error: within this context audio.h:11: error: ‘size_t audio::stream::BufferSize’ is private audio.cpp:27: error: within this context audio.cpp: In function ‘mad_flow audio::output(void*, const mad_header*, mad_pcm*)’: audio.cpp:49: error: new declaration ‘mad_flow audio::output(void*, const mad_header*, mad_pcm*)’ audio.h:15: error: ambiguates old declaration ‘int audio::output(void*, const mad_header*, mad_pcm*)’ audio.cpp: In function ‘mad_flow audio::error(void*, mad_stream*, mad_frame*)’: audio.cpp:83: error: new declaration ‘mad_flow audio::error(void*, mad_stream*, mad_frame*)’ audio.h:17: error: ambiguates old declaration ‘int audio::error(void*, mad_stream*, mad_frame*)’ audio.cpp: In constructor ‘audio::stream::stream(const char*)’: audio.cpp:119: error: ‘input’ was not declared in this scope audio.cpp:122: error: ‘output’ was not declared in this scope audio.cpp:123: error: ‘error’ was not declared in this scope make: *** [audio.o] Error 1 audio.h contains #include <stdlib.h> #include "mad.h" namespace audio { class stream { private: char* Buffer; size_t BufferSize, BufferPos; struct mad_decoder Decoder; friend enum mad_flow input(void* Data, struct mad_stream* MadStream); friend enum mad_flow output(void* Data, const struct mad_header* Header, struct mad_pcm* PCM); friend enum mad_flow error(void* Data, struct mad_stream* MadStream, struct mad_frame* Frame); public: stream(const char* FileName); ~stream(); void play(); }; } I have tried to just insert enum mad_flow {}; but that just gave a new problem. Can anyone see how to fix this?

  Read the article

• Is this so bad when using MySQL queries in PHP?

  - by alex

  I need to update a lot of rows, per a user request. It is a site with products. I could... Delete all old rows for that product, then loop through string building a new INSERT query. This however will lose all data if the INSERT fails. Perform an UPDATE through each loop. This loop currently iterates over 8 items, but in the future it may get up to 15. This many UPDATEs doesn't sound like too good an idea. Change DB Schema, and add an auto_increment Id to the rows. Then first do a SELECT, get all old rows ids in a variable, perform one INSERT, and then a DELETE WHERE IN SET. What is the usual practice here? Thanks

  Read the article

• Apache Config with Wildcard/Non-Wildcard Subdomain Mix

  - by SoupNutsy

  I have the domain, we'll call it "mydomain.com" and I want the following virtual hosts set up to resolve in the following way: mydomain.com / www.mydomain.com to point to /var/www/ dev.mydomain.com to point to /var/www/dev/ *.mydomain.com (all other subdomains) to point to /var/www/old My apache configuration is currently set up as: NameVirtualHost 1.2.3.4:80 <VirtualHost 1.2.3.4:80> ServerAlias *.mydomain.com DocumentRoot /var/www/old </VirtualHost> <VirtualHost 1.2.3.4:80> ServerName mydomain.com ServerAlias www.mydomain.com DocumentRoot /var/www </VirtualHost> <VirtualHost 1.2.3.4:80> ServerAlias dev.mydomain.com DocumentRoot /var/www/dev </VirtualHost> Unfortunately, this is not working as I expected. With this configuration, only the first (wildcard) VirtualHost entry works properly. What is the right way to configure Apache to do this?

  Read the article

• MPMoviePlayerContentPreloadDidFinishNotification does not fire [iPhone]

  - by JOKe

  I'm running into a problem with the MPMoviePlayerContentPreloadDidFinishNotification notification. I've regisered to recieve the MPMoviePlayerContentPreloadDidFinishNotification notification and MPMoviePlayerPlaybackDidFinishNotification but the first one never fires. Is this bug in Firmware OS 3.0 ? maybe fixed in 3.1 ? or ? Because my divice and similator is 3.0 maybe this is a bug ? My code : ... [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(MovieDidLoad:) name:MPMoviePlayerContentPreloadDidFinishNotification object:nil]; [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(MovieDidLoad:) name:MPMoviePlayerPlaybackDidFinishNotification object:nil]; ... -(void)MovieDidLoad:(NSNotification*)notification { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Notification Listener" message:@"Notification Listener invoked" cancelButtonTitle:@"Ok dude!" otherButtonTitles:nil]; [alert show]; [alert release]; } The MPMoviePlayerPlaybackDidFinishNotification is always fired but MPMoviePlayerContentPreloadDidFinishNotification is never fired. Any ideas ?

  Read the article

• Moving from WCF RIA Beta to RC: best practices?

  - by Duncan Bayne

  I have an existing WCF RIA project built on the Release Candidate; I'm now moving to the Release version & have discovered many changes. David Scruggs made the following comment on his (MSDN) blog: "If you’ve written anything in SIlverlight 4 RIA Services, you’ll need to rewrite it. There has been a lot of refactoring and namespace moves." Having made a brief attempt to compile the old solution with the new RIA framework I'm inclined to agree. My current plan is to: remove the Silverlight Business Application projects from the Solution rebuild the EF4 items from the database create a new Silverlight Business Application project re-add the files (XAML, CS) from the old Silverlight Business Application project Does this sound like a reasonable approach? I think it's cleaner than trying to manually alter the existing project.

  Read the article

• oracle's pro*C compiler and gnu C (__builtin_va_list, __attribute__, etc)

  - by Charles Ma

  I'm compiling a database library with pro*C which converts the .ppc library file to a .c file that gcc can use. However, I'm getting a lot of errors in pro*C like the following PCC-S-02201, Encountered the symbol "__ attribute__ " when expecting one of the following ... , Encountered the symbol "__builtin_va_list" when expecting one of the following The missing symbols are from a chain of standard includes like stdio.h and stdlib.h. How do I get around this issue? The library I'm compiling came from an old solaris system that we're now upgrading (to a new solaris 10 system) and the header files don't seem to use these symbols. e.g. the newer .h files has typedef __builtin_va_list va_list while the old .h files has typedef void* va_list There are a lot of things like this so I'm reluctant to go and fix all of them manually with a typedef

  Read the article

• Linux kernel scheduling

  - by Arpit

  Hi, I wish to know how Old Linux scheduling algorithm SJF (shortest job first) calculates the process runtime ?

  Read the article

• Dotrine::Zend::How generate new doctrine models without delete doctrine models classes with my code

  - by Yosef

  Hi, I build zend app with doctrine. The problem is when i add new tables to database and I should generate doctrine models, because I add my own code to Doctine generated classes- I dont wont to delete them. I solve this problem like that: 1. copy old generated doctine models classes to other folder 2. generate doctrine models from database 3. remove same new doctrine models class with old I think my solution stupied, but i cant think about something else. Please help me, Thanks, Yosef

  Read the article

• Update to php5.3 breaks connecting to mysql db

  - by bobbyb

  I just updated php to 5.3 and can no longer connect to my remote mysql server. I get the following errors: mysqli_connect(): OK packet 6 bytes shorter than expected mysqli_connect(): (HY000/2000): mysqlnd cannot connect to MySQL 4.1+ using old authentication It seems this has to do with the new mysqlnd driver. Is there a way to force it to use the old libmysql driver. Also, reverting to php5.2.11 doesn't seem to fix the issue which seems to work for most people. Anyone have any suggestions? thanks!

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >