Search Results

Search found 46749 results on 1870 pages for 'system preferences'.

Page 87/1870 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• Looking for a good free or cheap task tracking system

  - by JWood

  I've finally decided that pen and paper/whiteboards are not up to the job as my workload increases so I'm looking for a good task tracking system. I need something that can track tasks in categories (projects) and allow me to assign priority to each task. I've tried iTeamWork which requires projects to have an end time which is no good for me as at least one of my projects is ongoing. I also tried Teamly which was required tasks to be set to a specific day which is no good as tasks sometimes take more than a day and I would like them organised by priority rather than specific days. Preferably looking for something hosted but I'm happy to install on our servers if it supports PHP/MySQL. Oh, and an iPhone client would be the icing on the cake! Can anyone recommend anything?

  Read the article

• List all devices of system

  - by pareshverma91

  In my understanding linux can list only those devices which it can understand, i.e. for which the drivers have been installed. I think lspci is the command for that. But how can one figure out if there exists some device in the system for which the drivers are not installed and perhaps some hint about what that device is for and what driver would suffice for it. I would like to know this info so as to be able to recompile my linux kernel to a minimum and would like to avoid a hit and trial approach.

  Read the article

• How to drop packets in a custom Intrusion Detection System

  - by tzoukos

  Hi there, I'm trying to build a custom Intrusion Detection and Prevention System (IDS/IPS). I found a great utility named ROPE which can scan the packet payload and drop the packet that doesn't follow the rules, set by a script. This serves my purpose completely, since what I want to do is check the payload for some specific text and then drop it or allow it ( the string feature in iptables wouldn't do me any good, because I want to check more than one string in tha payload, like usernames, id's, etc ). However, ROPE is really old and despite my many attempts I haven't managed to install it properly. Do you know any similar program that will help me drop packets in iptables depending on the payload? Any suggestion is greatly appreciated :)

  Read the article

• How to assign more then one open action to one file system

  - by Martin

  All operating system I use apart form Windows have a “Open with…” options for there Explorer, Finder, whatever. This is very useful as often more then one program can handle a given file extension. With the exception on zip file I generally have not seen such a function on Window. However since there is an exceptions it is possible. The questions I have is: How can a “Open with…” can be archived with windows? Is there perhaps a tool which can do it?

  Read the article

• Nvidia System Tools compatible with GTX 560 Ti?

  - by Paula Ferreira

  I want to download and use Nvidia System Tools with ESA suport. But on the "Supported Products" tab my GTX 560 Ti isn't listed. The product was last released on April last year, but it shows support for both the GTX 570 and 580 as well as the GTX 4x family. All sister cards of the GTX 560. Has anyone successfuly ran this nvidia product with the GTX 560 Ti? Why wasn't this card included on the list of supported products?

  Read the article

• Why Ubuntu Server asks to insert a CD-ROM when installed from PXE?

  - by MainMa

  I set up a PXE server which hosts both Ubuntu Desktop and Ubuntu Server. Ubuntu Desktop is installed successfully from PXE. Ubuntu Server seems to successfully load vmlinuz and initrd.gz, asks for the language, then the location, then the keyboard layout, and finally complains that it can't mount the CD-ROM: The content of /var/lib/tftpboot/pxelinux.cfg/default is the following: default ubuntu-installer/amd64/boot-screens/vesamenu.c32 menu title Ubuntu setup label ubuntu-14.04-desktop-amd64 menu label ubuntu-14.04-desktop-amd64 kernel ubuntu-14.04-desktop-amd64/vmlinuz.efi append initrd=ubuntu-14.04-desktop-amd64/initrd.lz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.1.41:/exports/ubuntu-14.04-desktop-amd64 splash -- label ubuntu-14.04-server-amd64 menu label ubuntu-14.04-server-amd64 kernel ubuntu-14.04-server-amd64/vmlinuz append initrd=ubuntu-14.04-server-amd64/initrd.gz root=/dev/nfs boot=install netboot=nfs nfsroot=192.168.1.41:/exports/ubuntu-14.04-server-amd64 splash -- What explains the fact that it requests the CD-ROM and how to avoid it?

  Read the article

• Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

  - by user38030

  Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails.

  Read the article

• Installing Ubuntu 14.04 on macbook pro EFI

  - by user279771

  Macbook pro: mavericks, 5.2, graphics: nvidia geforce 9600M I followed the guides from here: https://help.ubuntu.com/community/UEFIBooting#Detect_.28U.29EFI_firmware_processor_architecture and http://www.rodsbooks.com/ubuntu-efi/. What I have is the following: /dev/sda apple partitions /boot / (root) swap When installing ubuntu, I did not install the boot loader during installation but did so in a chroot environment after installing grub-efi. I installed grub to /dev/sda1 (efi) which created the grub64.efi file in efi/ubuntu. This allows the refined boot manager to bring up grub and select ubuntu however, the graphics does not work. Even after adding nomodeset and removing quiet/splash from the kernel parameters. Any ideas on what could be wrong? To be clear, if I remove quiet/splash, I can see all the text startup messages being printed out however, the display manager doesn't appear to start (the screen stays black). Oddly enough though, the ubuntu startup sound can be heard.

  Read the article

• Why doesn't Gradle include transitive dependencies in compile / runtime classpath?

  - by Francis Toth

  I'm learning how Gradle works, and I can't understand how it resolves a project transitive dependencies. For now, I have two projects : projectA : which has a couple of dependencies on external libraries projectB : which has only one dependency on projectA No matter how I try, when I build projectB, gradle doesn't include any projectA dependencies (X and Y) in projectB's compile or runtime classpath. I've only managed to make it work by including projectA's dependencies in projectB's build script, which, in my opinion does not make any sense. These dependencies should be automatically attached to projectB. I'm pretty sure I'm missing something but I can't figure out what. I've read about "lib dependencies", but it seems to apply only to local projects like described here, not on external dependencies. Here is the build.gradle I use in the root project (the one that contains both projectA and projectB) : buildscript { repositories { mavenCentral() } dependencies { classpath 'com.android.tools.build:gradle:0.3' } } subprojects { apply plugin: 'java' apply plugin: 'idea' group = 'com.company' repositories { mavenCentral() add(new org.apache.ivy.plugins.resolver.SshResolver()) { name = 'customRepo' addIvyPattern "ssh://.../repository/[organization]/[module]/[revision]/[module].xml" addArtifactPattern "ssh://.../[organization]/[module]/[revision]/[module](-[classifier]).[ext]" } } sourceSets { main { java { srcDir 'src/' } } } idea.module { downloadSources = true } // task that create sources jar task sourceJar(type: Jar) { from sourceSets.main.java classifier 'sources' } // Publishing configuration uploadArchives { repositories { add project.repositories.customRepo } } artifacts { archives(sourceJar) { name "$name-sources" type 'source' builtBy sourceJar } } } This one concerns projectA only : version = '1.0' dependencies { compile 'com.company:X:1.0' compile 'com.company:B:1.0' } And this is the one used by projectB : version = '1.0' dependencies { compile ('com.company:projectA:1.0') { transitive = true } } Thank you in advance for any help, and please, apologize me for my bad English.

  Read the article

• How to Make More Space Available on the Windows 7 Taskbar

  - by Lori Kaufman

  Do you pin a lot of programs to your Windows 7 Taskbar and run a lot of programs at once? Between pinned programs and other programs running, your Taskbar can get crowded. There are a few ways you can reclaim the space on your Taskbar. How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It

  Read the article

• Windows 7 system intermittent freezes

  - by lang2

  I've been using a new laptop with Windows 7 professional. Occasionally, the whole system will lock up for a few seconds before it comes back to normal. During the freeze, mouse can't be moved, keys are not recognized, music playback stops.... it's like there is a global mutex been locked on and not released. A easy way to reproduce this is to minimized the current window. It doesn't happen 100% but it's quite very annoying. Any help to get rid of this is much appreciated. lang2

  Read the article

• Is osTicket secure/private enough

  - by Andy

  I was going to use osTicket as my 'help desk' for my website, however I just got a little bit concerned when I realised that the clients' login details to see their support tickets are only their email address and a ticket ID. I am probably going over the top with security though, which is why I wanted to get some second opinions on how secure osTicket actually is and whether I should use it with my website. I run a software company, so chances are licence keys may be included in support tickets which are obviously sensitive information and valuable - so I want to ensure that the likelihood of a support ticket being hacked is very low. If there is any plugins/additions to make osTicket more 'secure', I would appreciate it if you could point me to them. Otherwise if there are any more free, more suited, help desk softwares out there please let me know. Thanks in advance

  Read the article

• My 5.1 audio system not working properly when I connect to Internet

  - by Gemboz

  I just bought a Genuis 5005 5.1 audio system, and I have an issue with it: It won't work properly when I get on the Internet (the central speaker isn't working). I also bought an Asus Xonar DG 5.1 sound card which works perfectly. I installed it and also installed the driver for it. When I play music/videos from my hard drive, all the speakers work fine, but when I connected to Internet to play videos/music, the center speaker won't work. How can I fix this issue?

  Read the article

• Weirdness After Reinstall The Windows Operating System

  - by Eka Anggraini

  I want to ask, and ask advice from you guys. I have reinstall my OS and successful, I'm turn off the restart a few times is fine .. Later a few hours later, when I turn it on, a sudden there was an error : Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM Select 'R' at the first screen to start repair. So I intend to repair, reinstall all again .. I enter cd windows : press any key .. with blue background text below: Setup is loading files (windows executive) Setup is loading files (hardware abstraction layer) Then I was waiting until half an hour, and no changes, I repeated the process several times is also nil. Please advice and solutions about the problem where? Hardware / cd Windows ?

  Read the article

• Maxi/minimizing active applications in system tray

  - by ldigas

  This is a little hard to explain, so I'll try with an examle ... I got a lot of always active applications that have the feature which enables them to be minimized to system tray. Double click / or single click to restore them, and down there again they go. So I spend a lot of time double/single clicking. Is it possible, and how would one go about it, to define an for example AHK shortcut for minimizing/restoring back again those applications (where every app. would have its own shortcut, of course) ? Of course, all other approaches are equally welcomed.

  Read the article

• Installing 12.04 within 11.04

  - by user288752

  I recently installed 11.04 from an installation disk (overwriting Windows in the process). I know 11.04 is no longer supported but I had no problems subsequently upgrading it to 12.04 (via 11.10) a couple of months ago on another device. This time though, things are different. I can't upgrade through update manager because Ubuntu then tells me I have no internet connection, which is (obviously incorrect). I have tried to circumvent the problem by downloading the 12:04 iso from ubuntu.com directly but now I'm troubled by something else. The download is succesfull but after mounting the iso I can't interact with it. When I try to access the Wubi it gives me the following message: Archive: /home/lars/.cache/.fr-7g75Fe/wubi.exe [/home/lars/.cache/.fr-7g75Fe/wubi.exe] End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /home/lars/.cache/.fr-7g75Fe/wubi.exe or /home/lars/.cache/.fr-7g75Fe/wubi.exe.zip, and cannot find /home/lars/.cache/.fr-7g75Fe/wubi.exe.ZIP, period. What am I doing wrong here?

  Read the article

• VMware Workstation 7.x error loading operating system help

  - by StealthRT

  Hey all i am using the windows verison of VMware Workstation 7.x and I am getting this error when i start my VM error loading operating system That only started to happen when i tried to load that vmdk file into the program VirtualBox. Prior to this it ran just fine. Ever since then i have been unable to start it in VMware Workstation 7.x... I've already tried to repair the vmdk file but when i do it tells me there are no errors found? I used vmware-vdiskmanager.exe -R "c:\blah\my vm disk.vmdk" Anyone else have any more suggestions i could try? It's a 300+GB VM so i really don't want to lose it!!! Thanks, David

  Read the article

• Sprite and Physics components or sub-components?

  - by ashes999

  I'm taking my first dive into creating a very simple entity framework. The key concepts (classes) are: Entity (has 0+ components, can return components by type) SpriteEntity (everything you need to draw on screen, including lighting info) PhysicsEntity (velocity, acceleration, collision detection) I started out with physics notions in my sprite component, and then later removed them to a sub-component. The separation of concerns makes sense; a sprite is enough information to draw anything (X, Y, width, height, lighting, etc.) and physics piggybacks (uses the parent sprite to get X/Y/W/H) while adding physics notions of velocity and collisions. The problem is that I would like collisions to be on an entity level -- meaning "no matter what your representation is (be it sprites, text, or something else), collide against this entity." So I refactored and redirected collision handling from entities to sprite.physics, while mapping and returning the right entity on physics collisions. The problem is that writing code like this.GetComponent<SpriteComponent>().physics is a violation of abstraction. Which made me think (this is the TLDR): should I keep physics as a separate component from sprites, or a sub-component, or something else? How should I share data and separate concerns?

  Read the article

• Alerting system for Munin

  - by akirk

  I am very satisfied with munin as a monitoring tool (as I only have a simple 2-server setup) but its alerting system is very annoying as you can only configure it to send an e-mail upon every check which generates a warning or an error. It seems like the only option is to use Nagios but in Debian it has Apache as a dependency and I already use nginx on my monitoring machine. All I want is to have the possibility to silence/acknowledge the alarm while I am working on a fix, so that I don't get bombarded with e-mails. Nagios seems like an oversized solution for that anyway. Is there any simple solution for that or am I the only one who feels like he needs such a tool?

  Read the article

• Rails/Node.js interaction

  - by lpvn

  I and my co-worker are developing a web application with rails and node.js and we can't reach a consensus regarding a particular architectural decision. Our setup is basically a rails server working with node.js and redis, when a client makes a http request to our rails API in some cases our rails application posts the response to a redis database and then node.js transmits the response via websocket. Our disagreement occurs in the following point: my co-worker thinks that using node.js to send data to clients is somewhat business logic and should be inside the model, so in the first code he wrote he used commands of broadcast in callbacks and other places of the model, he's convinced that the models are the best place for the interaction between rails and node. I on the other hand think that using node.js belongs to the runtime realm, my take is that the broadcast commands and other node.js interactions should be in the controller and should only be used in a model if passed through a well defined interface, just like the situation when a model needs to access the current user of a session. At this point we're tired of arguing over this same thing and our discussion consists in us repeating to ourselves our same opinions over and over. Could anyone, preferably with experience in the same setup, give us an unambiguous response saying which solution is more adequate and why it is?

  Read the article

• Recorded Webcast Available: Extend SCOM to Optimize SQL Server Performance Management

  - by KKline

  Join me and Eric Brown, Quest Software senior product manager for SQL Server monitoring tools, as we discuss the server health-check capabilities of Systems Center Operations Manager (SCOM) in this previously recorded webcast. We delve into techniques to maximize your SCOM investment as well as ways to complement it with deeper monitoring and diagnostics. You’ll walk away from this educational session with the skills to: Take full advantage of SCOM’s value for day-to-day SQL Server monitoring Extend...(read more)

  Read the article

• LDAP System Authentication in Ubuntu

  - by andrew

  Hi, I'm having a bit of an issue with system authentication against LDAP in Ubuntu. The LDAP server is OpenLDAP on Ubuntu 10.10, and the client is Ubuntu 10.10 also. I've set up the client by following the "LDAP Authentication" steps at https://help.ubuntu.com/10.10/serverguide/C/openldap-server.html apt-get install libnss-ldap; auth-client-config -t nss -p lac_ldap; pam-auth-update I've done these steps on the server and been able to see LDAP users when running getent passwd. Doing the same steps on the client, getent passwd does not return any LDAP users. Any ideas?

  Read the article

• Operation System Clone from a Motherboard to Another

  - by Devian

  Lately we had an idea with my Family of building a Super Computer from Scratch. So while we were planning on building our setup, one idea came to my head that it seems possible but i want also your opinions. Lets say that we have 2 ATX Motherboards and 1 MicroATX. Motherboard Setup: 1x ASUS Rampage Extreme Black Edition 1x Intel Core i7 4960x 4x GTX Titan 8x 8GB 1866 Ram Motherboard Setup: 1x SuperMicro X9DRG-QF 2x Intel Xeon E7-8890V2 1x nVIDIA QUADRO K6000 4x nVIDIA Tesla K40 128 GB 1866 Ram And imagine a Solid State Drive with a Switch connected to both of the MotherBoards Can i edit & copy all the data of The first motherboard's RAM to The Other's to be able to continue operating my current Operation System after switching the SSD to the Second Motherboard, from the Second MotherBoard and vice versa? Les say my "Switch Application" modifies everything the Kernel needs to believe nothing happend and continuing its operation from the same point the first motherboard stopped. (Changes on the Device List, CPU Cores, Drivers... etc)

  Read the article

• how to set owner and permission to a cryptsetup made device?

  - by Antoine Rodriguez

  I have an encrypted loopback volume. I need to mount and umount manually the volume so I use cryptsetup luksOpen and cryptsetup luksClose . However, When I invoke this command it pops up the /dev/mapper device under all the sessions under gnome/xfce/kde/unity ... And then it let the user to mount (with password), expulse and unmount the volume. It's quite annoying in a multi user server (you are working on your files and the volume is being unmounted). How can I define ownership and permission on the device ? I've tried chown and chmod approach witch gives nothing. Cryptsetup doesn't have any options that let you do that. crypttab auto mount the filesystem on boot witch is unwanted (only manual mount)

  Read the article

• How to Diagnose a Pre-Operating System Load or Hardware Issue

  - by soandos

  How can I find out if my problem is hardware based? If it is, how can I figure out what component is to blame How can I fix other pre-operating system issues? As an aside, what are all of these components responsible for, and if they break, what can go wrong? (This question comes up frequently, and the suggested solutions are usually the same. This community wiki is an attempt to serve as the definitive, most comprehensive answer possible. Feel free to add your contributions via edits.)

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >