Search Results

Search found 71242 results on 2850 pages for 'temp file guy'.

Page 87/2850 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • Windows 7, file properties - Is "date accessed" ALWAYS 100% accurate?

    - by Robert
    Hello, Here's the situation: I went on vacation for a couple of weeks, but before I left, I took the harddrive out of my computer and hid it in a different location. Upon coming back on Monday and putting the harddrive back in my computer, I right-clicked on different files to see their properties. Interestingly enough, several files had been accessed during the time I was gone! I right-clicked different files in various locations on the harddrive, and all of these suspect files had been accessed within a certain time range (Sunday, ?January ?09, ?2011, approximately ??between 6:52:16 PM - 7:16:25 PM). Some of them had been accessed at the exact same time--down to the very second. This makes me think that someone must have done a search on my harddrive for certain types of files and then copied all those files to some other medium. The Windows 7 installation on this harddrive is password protected, but NOT encrypted, so they could have easily put the harddrive into an enclosure/toaster to access it from a different computer. Of course I did not right-click every single file on my computer, but did so in different folders. For instance, one of the folders I went through has different types of files: .mp3, ,prproj, .3gp, .mpg, .wmv, .xmp, .txt with file-sizes ranging from 2 KB to 29.7 MB (there is also a sub-folder in this folder which contains only .jpg files); however, of all these different types of files in this folder and its subfolder, all of them had been accessed (including the .jpg files from the sub-folder) EXCEPT the .mp3 files (if it makes any difference, the .mp3 files in this folder range in size from 187 KB to 4881 KB). Additionally, this sub-folder which contained only .jpg files (48 .jpg files to be exact) was not accessed during this time--only the .jpg files within it were accessed-- (between 6:57:03 PM - 6:57:08 PM). I thought that perhaps this was some kind of Windows glitch that was displaying the wrong access date, but then I looked at the "date created" and "date modified" for all of these files in question, and their created/modified dates and times were spot on correct. My first thought was that someone put the harddrive into an enclosure/toaster and viewed the files; but then I realized that this was impossible because several of the files had been accessed at the same exact time down to the second. So this made me think that the only other way the "date accessed" could have changed would have been if someone copied the files. Is there any chance at all whatsoever that this is some kind of Windows glitch or something, or is it a fact that someone was indeed accessing my files (and if someone was accessing my files, am I right about the files in question having been copied)? Is there any other possibility for what could have happened? Do I need to use any kinds of forensics tools to further investigate this matter (and if so, which tools), or is there any other way in which I can be certain of what took place in that timeframe the day before I got back? Or is what I see with Windows 7 good enough (i.e. accurate and truthful)? Thanks in advance, and please let me know if any other details are required on my part.

    Read the article

  • Photo sharing social platform [closed]

    - by user1696497
    I am working on a photo sharing social platform like Flickr, Photobucket. To start off with I have half a million photos as of now. I want to convert all of these into a single format, compression ratio and use it as an original image. I will be storing original image, re-sized image according to layout and a thumbnail. I have started off with ruby, didn't find supporting libraries. I am considering python as it has a good image processing library and instagram is using it. I want some advise about how the image has to be processed while uploading, efficient way of storage whether database or a file system, image compressions, and precautions to be taken. I would be having profile pictures, do I need store them separately or along with the images? If I want to store the images on a file system, which file system should I use and also should I store the url or should I use any intermediate key value store like redis?

    Read the article

  • Is there a remote file transfer command that preserves nanosecond timestamps?

    - by Denver Gingerich
    I've tried transferring files using scp and rsync on Ubuntu 10.04, but neither of them preserves more than second precision. Here's an example: $ touch test1 $ scp -p test1 localhost:test2 $ ls -l --full-time test* -rw-r--r-- 1 user user 0 2011-01-14 18:46:06.579717282 -0500 test1 -rw-r--r-- 1 user user 0 2011-01-14 18:46:06.000000000 -0500 test2 $ cp -p test1 test2 $ ls -l --full-time test* -rw-r--r-- 1 user user 0 2011-01-14 18:46:06.579717282 -0500 test1 -rw-r--r-- 1 user user 0 2011-01-14 18:46:06.579717282 -0500 test2 $ A straight copy works fine, but scp truncates the timestamp. Are there any tools (preferably similar to scp or rsync in their usage) that do remote file transfers while preserving nanosecond timestamps? I could write a hacky script to do it, but I'd rather not.

    Read the article

  • Can't install any drivers at all on Windows 8. Error 0x000003F9

    - by ABarney
    I suddenly can't install any drivers at all on my Windows 8 Pro x64 install. It doesn't matter what kind of driver it is, nothing will install. Everything ends with error 0x000003F9: The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format. When Windows Update tries to install a driver, it just gives error code 800703F9 and says that "Windows Update ran into a problem." I've already done a scan of system files with sfc, tried another user account, done a chkdsk, and a few more things, but nothing works. The problem started when I tried to install drivers for my printer earlier today and suddenly started getting messages saying that "Windows Modules Installer has stopped working." I decided to restart and was being greeted with the recovery boot options. I shut the computer down, but when I booted it back up the same thing happened, so I did a repair your pc, and was able to boot into the OS properly. Then I rebooted into my external drive and did a chkdsk on the Windows 8 install that started acting funny. When I booted back into Windows 8, I wasn't able to install any drivers. They all keep coming up with the same error. And I can't seem to find anything at all on this issue. Any help would be much appreciated. Here's an install log from a failed driver install: >>> [Device Install (DiInstallDriver) - F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf] >>> Section start 2012/12/06 20:15:20.714 cmd: "F:\Windows\System32\InfDefaultInstall.exe" "F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf" inf: {SetupCopyOEMInf: F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf} 20:15:20.716 sto: {Import Driver Package: F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf} 20:15:20.719 sto: Driver Store = F:\Windows\System32\DriverStore [Online] (6.2.9200) sto: Driver Package = F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf sto: Architecture = amd64 sto: Flags = 0x00000000 inf: Provider = Google, Inc. inf: Class GUID = {3f966bd9-fa04-4ec5-991c-d326973b5128} inf: Driver Version = 08/27/2012,7.0.0.1 inf: Catalog File = androidwinusba64.cat inf: Version Flags = 0x00000011 ! sto: Unable to determine presence of driver package 'android_winusb.inf'. Error = 0x000003F9 flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\amd64\WdfCoInstaller01009.dll' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WdfCoInstaller01009.dll'. flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\amd64\WinUSBCoInstaller2.dll' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WinUSBCoInstaller2.dll'. flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf'. flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\androidwinusba64.cat' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\androidwinusba64.cat'. pol: {Driver package policy check} 20:15:20.814 pol: {Driver package policy check - exit(0x00000000)} 20:15:20.814 sto: {Stage Driver Package: F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf} 20:15:20.815 ! sto: Unable to determine presence of driver package 'android_winusb.inf'. Error = 0x000003F9 inf: {Query Configurability: F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf} 20:15:20.820 inf: Driver package uses WDF. inf: Driver package 'android_winusb.inf' is configurable. inf: {Query Configurability: exit(0x00000000)} 20:15:20.823 flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WdfCoInstaller01009.dll' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\amd64\WdfCoInstaller01009.dll'. flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WinUSBCoInstaller2.dll' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\amd64\WinUSBCoInstaller2.dll'. flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\android_winusb.inf'. flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\androidwinusba64.cat' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\androidwinusba64.cat'. sto: {DRIVERSTORE IMPORT VALIDATE} 20:15:20.875 sig: {_VERIFY_FILE_SIGNATURE} 20:15:20.881 sig: Key = android_winusb.inf sig: FilePath = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\android_winusb.inf sig: Catalog = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\androidwinusba64.cat ! sig: Verifying file against specific (valid) catalog failed! (0x800b0109) ! sig: Error 0x800b0109: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider. sig: {_VERIFY_FILE_SIGNATURE exit(0x800b0109)} 20:15:20.893 sig: {_VERIFY_FILE_SIGNATURE} 20:15:20.893 sig: Key = android_winusb.inf sig: FilePath = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\android_winusb.inf sig: Catalog = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\androidwinusba64.cat sig: Success: File is signed in Authenticode(tm) catalog. sig: Error 0xe0000242: The publisher of an Authenticode(tm) signed catalog has not yet been established as trusted. sig: {_VERIFY_FILE_SIGNATURE exit(0xe0000242)} 20:15:20.907 ! sig: Driver package signer is unknown, but user trusts signer. sto: {DRIVERSTORE IMPORT VALIDATE: exit(0x00000000)} 20:15:22.701 sig: Signer Score = 0x0F000000 sig: Signer Name = Google Inc sto: {DRIVERSTORE IMPORT BEGIN} 20:15:22.702 sto: {DRIVERSTORE IMPORT BEGIN: exit(0x00000000)} 20:15:22.702 cpy: {Copy Directory: F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}} 20:15:22.703 cpy: Target Path = F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3 cpy: {Copy Directory: F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\amd64} 20:15:22.704 cpy: Target Path = F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3\amd64 cpy: {Copy Directory: exit(0x00000000)} 20:15:22.705 cpy: {Copy Directory: exit(0x00000000)} 20:15:22.706 ! sto: Unable to determine if driver package 'android_winusb.inf' is already registered. Error = 0x000003F9 idb: {Register Driver Package: F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3\android_winusb.inf} 20:15:22.707 !!! idb: Failed to create driver package object 'android_winusb.inf_amd64_f7c4b212c9d862a3' in DRIVERS database node. Error = 0x000003F9 !!! idb: Failed to register driver package 'F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3\android_winusb.inf'. Error = 0x000003F9 idb: {Register Driver Package: exit(0x000003f9)} 20:15:22.709 sto: {DRIVERSTORE IMPORT END} 20:15:22.710 sto: {DRIVERSTORE IMPORT END: exit(0x000003f9)} 20:15:22.710 sto: Rolled back driver package import. !!! sto: Failed to import driver package into Driver Store. Error = 0x000003F9 sto: {Stage Driver Package: exit(0x000003f9)} 20:15:22.736 sto: {Import Driver Package: exit(0x000003f9)} 20:15:22.766

    Read the article

  • Recommendations needed for email server and file sharing solutions.

    - by Abeansits
    I work at a relatively small company, around 30 people and we are now looking into a solution that can handle: File sharing. Email server. Calendar support. Around 30 users. Accessible from external network. Support for Windows XP (and above), Mac OS 10.6.3 and Ubuntu clients. When it comes down to security we don't have the experience to comment on that. I guess the de facto standard is good enough for us. Sorry if this is formulated as a n00b question, because it is. =) Any kind of pointer in the right direction will be appreciated. Thanks in advance! //Abean

    Read the article

  • Vim: Fuzzy file search comparable to Sublime Text 2's?

    - by Jed
    I've tried FuzzyFinder, Command-T, and Ctrl-P (which is my finder of choice right now), but none hold a candle to Sublime Text 2. For example, I want to type: Head.php and have it find, among others: app/code/core/Mage/Page/Block/Html/Head.php Currently in Ctrl-P, which has otherwise served me better than Command-T, searching for Head.php gives me these first: downloader/lib/Mage/Connect/Command/Config_Header.php app/code/local/Namespace/Modals/Helper/Reader.php app/code/core/Mage/XMLConnect/Helper/Ipad.php My file is nowhere to be found (and I've never opened any of the above files), so I have to type this instead: pagehtmlhead.php Is there any utility that does smarter scoring/matching?

    Read the article

  • What technical reasons exist for not using space characters in file names?

    - by Chris W. Rea
    Somebody I know expressed irritation today regarding those of us who tend not to use spaces in our filenames, e.g. NamingThingsLikeThis.txt -- despite most modern operating systems supporting spaces in filenames. Are there technical reasons that it's still common to see file names without (appropriate) spaces? If so, what are these technical reasons that spaces in filenames are avoided or discouraged, and in what circumstances are they relevant? The most obvious reason I could think of, and why I typically avoid it, are the extra quotes required on the command line when dealing with such files. Are there any other significant technical reasons?

    Read the article

  • What hash should be used to ensure file integrity?

    - by Corey Ogburn
    It's no secret that large files offered up for download often are coupled with their MD5 or SHA-1 hash so that after you download you can verify the file's integrity. Are these still the best algorithms to use for this? Obviously these are very popular hashes that potential downloaders would have easy access to. Ignoring that factor, what hashes have the best properties for being used for this? For example, bcrypt would be horrible for this. It's designed to be slow. That would suck to use on your 7.4 GB dual layer OS ISO you just downloaded when a 12 letter password might take up to a second with the right parameters.

    Read the article

  • Is there some way Linux editors can tell the programming language without the file extension?

    - by vfclists
    I am editing some scripts on Linux without the languages file extensions, and it seems that the editors, namely vi, nano and gedit are not applying syntax highlighting because the filenames don't use the language extensions. Is there some parameters to be passed or some setting that can enable them to recognize the language? Update: After some googling I realize that bash has that ability, at least to do some parsing or check the shebang at the top determine the language. By default Ubuntu does not install the complete vim package, so after installing it, the shell files are recognized. I don't know about nano or gedit, but vi and its graphical counterpart will do.

    Read the article

  • No file sharing between two server 2008 R2 machines.

    - by ProfKaos
    I have just replaced XP with Server 2008 R2 on my test sever, and have been running 2008 R2 on my dev laptop. When my server was still XP, file sharing just worked, but now it just doesn't. I've enabled everything I can about sharing, and I can ping the server by machine name, but if I try an access a share, I get asked for a password. The passowrd dialog assumes a domain for this user, but neither my laptop admin user nor my server admin user can get past this login. What am I doing wrong?

    Read the article

  • How can I view and sort after the page count for multiple PDF files in a Windows file explorer?

    - by grunwald2.0
    I unsuccessfully used the "pages" feature in Windows Explorer, as well as in Directory Opus 10 and Free Commander XT (which I installed just for that reason, to try it out) to display the page count of multiple PDFs in a folder. All my PDF's are free to edit, i.e. not write-protected. I don't understand why any PDF reader can display the (correct) page number, but none of the file explorers can? (In the "details" view of course.) The only documents whose page count is displayed are MS Word documents. Do I have to use Adobe Bridge? (I didn't try it.) On a side-note: Did that change in Windows 8? Initial research: Google search was unsuccessful, the only slightly related SE topic I found was "How to count pages in multiple PDF files?".

    Read the article

  • How to send a direccion to the void using the Hosts file and without using 127.0.0.1?

    - by magallanes
    I have some name address that i want to send straight to the void using the HOSTS file but i don't want to use the 127.0.0.1. How can i do that?. Why?, I want to speed up some proccess but 127.0.0.1 is serving a webserver, so if i use 127.0.0.1 then this process will call my webserver, consuming resources and may be delaying the process. Right now, i am using 0.0.0.0 instead of 127.0.0.1 but i am not sure if it is correct. 0.0.0.0 crl.microsoft.com

    Read the article

  • Why is the "file" command get confused on .py files?

    - by pythonic metaphor
    I have several python modules that I've written. Randomly, I used file on this directory, and I was really surprised by what I saw. Here's the resulting count of what it thought the files were: 1 ASCII Java program text, with very long lines 1 a /bin/env python script text executable 1 a python script text executable 2 ASCII C++ program text 4 ASCII English text 18 ASCII Java program text That's strange! Any idea what's going on or why it seems to think python modules are very often java files? I'm using CentOS 5.2.

    Read the article

  • How to start a cmd window and issue tail request in a bat file?

    - by Kari
    I can open a cmd window and start a tail by entering something like this: tail -f C:\Oracle\WebCenter\Sites\11gR1\Sites\11.1.1.6.1\logs\sites.log This is probably a stupid question, but how do I do this in a batch file? It should be easy but it's not working - I have tried a couple variations and no success. Can anyone tell me what I am doing wrong here? ECHO OFF CD C:\Oracle\WebCenter\Sites\11gR1\Sites\11.1.1.6.1\logs\ cmd tail -f sites.log I've also tried: ECHO OFF start cmd tail -f C:\Oracle\WebCenter\Sites\11gR1\Sites\11.1.1.6.1\logs\sites.log (am using Win7 Ultimate, on a 64-bit machine, if that has any bearing)

    Read the article

  • How can I retrieve the details of the file from an outbound operation in BPEL 11g

    - by [email protected]
    Several times, we come across requirements where we need to capture the details of the file that got written out as a part of a BPEL process invoking a File/Ftp Adapter. Consider a case where we're using FileNamingConvention as "PurchaseOrder_%SEQ%.txt" and we need to do some post processing based on the filename (please remember that we wouldn't know the filename until the adapter invocation completes) In order to achieve this, we need to manually tweak the WSDL so that the File/Ftp Adapter can return the metadata of the file that was written out. In general, the File/Ftp Write/Put WSDL operations are one way as shown below:         The File/Ftp Adapters are designed to return the metadata back if this WSDL is tweaked into a two-way WSDL. In addition, the <wsdl:output/> must import the fileread.xsd schema (see below). You will need to copy fileread.xsd from  here into the xsd folder of your composite.       Finally, we will need to tweak the  WSDL. (highlighted below)           Finally, the BPEL <invoke> would look as shown below. Please note that the file metadata would be returned as a part of the BPEL output variable:

    Read the article

  • Centralizing a resource file among multiple projects in one solution (C#/WPF)

    - by MarkPearl
    One of the challenges one faces when doing multi language support in WPF is when one has several projects in one solution (i.e. a business layer & ui layer) and you want multi language support. Typically each solution would have a resource file – meaning if you have 3 projects in a solution you will have 3 resource files.   For me this isn’t an ideal solution, as you normally want to send the resource files to a translator and the more resource files you have, the more fragmented the dictionary will be and the more complicated it will be for the translator. This can easily be overcome by creating a single project that just holds your translation resources and then exposing it to the other projects as a reference as explained in the following steps. Step 1 Step 1 -  Add a class library to your solution that will contain just the resource files. Your solution will now have an additional project as illustrated below. Step 2 Reference this project to the other projects. Step 3 Move all the resources from the other resource files to the translation projects resource file. Step 4 Set the translations projects resource files access modifier to public. Step 5 Reference all other projects to use the translation resource file instead of their local resource file. To do this in xaml you would need to expose the project as a namespace at the top of the xaml file… note that the example below is for a project called MaxCutLanguages – you need to put the correct project name in its place.   xmlns:MaxCutLanguages="clr-namespace:MaxCutLanguages;assembly=MaxCutLanguages"   And then in the actual xaml you need to replace any text with a reference to the resource file. <TextBlock Text="{x:Static MaxCutLanguages:Properties.Resources.HelloWorld}"/> End Result You can now delete all the resource files in the other projects as you now have one centralized resource file.

    Read the article

  • TransformXml Task locks config file identified in Source attribute

    - by alexhildyard
    As background: the TransformXml MSBuild task is typically invoked in a custom build step to mark up a web.config file with per-environment configuration; its flexible directives offer highly granular control over the insertion, removal, substitution and transformation of existing configuration hierarchies. For those using the TransformXML task (typically in a Web Deployment Project) I raised an issue against Visual Studio 2010, in which the file handle on the input file was not released, meaning that following transformation the source file remained locked. As a result, the best way to transform a file was first to rename it, transform it, and then copy it back, leaving the "locked" file to be freed up later.I just heard today that this has now been resolved in Visual Studio 2012 RTM. That's good news, because Web Config Transformations offer a lot. An intelligent, automated build process will swap in the relevant transform(s), making it much easier to synthesise the Developer and Build server builds. This makes for a simpler and more exemplary build process, and with the tighter coupling comes a correspondingly quicker response to Developmental change.Oh, and don't forget -- it isn't just web.configs you can transform. You can transform app.configs, or indeed any XML file that honours the task's schema and hierarchical rules.

    Read the article

  • c# Create a unique name with a GUID

    - by Dave Rook
    I am creating a back up solution. I doubt there is anything new in what I'm trying to achieve. Before copying the file I want to take a backup of the destination file in case anything becomes corrupt. This means renaming the file. I have to be careful when renaming in case the file already exists and adding a 01 to the end is not safe. My question is, based upon not finding the answer else where, would adding a GUID to the file name work. So, if my file was called file01.txt, renaming the file to file01.txtGUID (where GUID is the generated GUID), I could then perform my back up of that file (at this instance having 2 back ups) and then, after ensuring the file has copied (by comparing length of file to the source), delete the file with the GUID in the name. I know the GUID is not 100% guaranteed to be unique but would this suffice?

    Read the article

  • file cretaed using exec could not be accessed immediately after creation?

    - by Holicreature
    HI I'm using exec in php to execute a command and it will create a .png file in a temp folder.. After creating that i'm trying to open that file and read contents and process them,, but i end up file could not read error.. I think the time taken by the exec to execute and create a file is the cause for the issue.. but i dont know how to fix it? i tried sleep() but it makes my script to run slow <?php error_reporting(E_ALL); extension_loaded('ffmpeg') or die('Error in loading ffmpeg'); //db connection codes $max_width = 120; $max_height = 72; $path ="/path/"; $qry="select id, input_file, output_file from videos where thumbnail='' or thumbnail is null;"; $res=mysql_query($qry); $cnt = 1; while($row = mysql_fetch_array($res,MYSQL_ASSOC)) { $outfile = $row[output_file]; $imgname = $cnt.".png"; $srcfile = "/path/".$outfile; echo "####$srcfile####"; exec("ffmpeg -i ".$srcfile." -r 1 -ss 00:00:05 -f image2 -s 120x72 ".$path.$imgname); $nname = "./temp/".$imgname; echo "nname===== $nname"; $fileo = fopen($nname,"rb"); if($fileo) { $imgData = addslashes(file_get_contents($nname)); .. ... .... } else echo "Could not open<br><br>"; $cnt = $cnt + 1: } ?>

    Read the article

  • Convert Excel File 'xls' to CSV, CAUTION: Bumps Ahead

    - by faizanahmad
    The task was to provide users with an interface where they can upload the 'csv' files, these files were to be processed and loaded to Database by a Console application. The code in Console application could not handle the 'xls' files so we thought, OK, lets convert 'xls' to 'csv' in the code, Seemed like fun. The idea was to convert it right after uploading within 'csv' file. As Microsoft does not recommend using the  Excel objects in ASP.NET, we decided to use the Jet engine to open xls. (Ace driver is used for xlsx) The code was pretty straight, can be found on following links: http://www.c-sharpcorner.com/uploadfile/yuanwang200409/102242008174401pm/1.aspx http://www.devasp.net/net/articles/display/141.html FIRST BUMP 'OleDbException (0x80004005): Unspecified error' ( Impersonation ): The ablove code ran fine in my test web site and test console application, but it gave an 'OleDbException (0x80004005): Unspecified error' in main web site, turns out imperonation was set to True and as soon as I changed it to False, it did work. on My XP box, web site was running under user                   'ASPNET'  with imperosnation set to FALSE                   'IUSR_*' i.e IIS guest user with impersonation set to TRUE The weired part was that both users had same rights on the folders I was saving files to and on Excel app in DCOM Config.  We decided to give it a try on Windows Server 2003 with web site set to windows authentication ( impersonation = true ) and yes it did work. SECOND BUMP 'External table not in correct format': I got this error with some files and it appeared that the file from client has some metadata issues  ( when I opened the file in Excel and try to save it ,excel  would give me this error saying File can not be saved in current format ) and the error was caused by that. Some people were able to reslove the error by using "Extended Properties=HTML Import;" in connection string. But it did not work for me. We decided to detour from here and use Excel object :( as we had no control on client setting the meta deta of Excel files. Before third bump there were a ouple of small thingies like 'Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 80070005' Fix can be found at http://blog.crowe.co.nz/archive/2006/03/02/589.aspx THIRD BUMP ( Could not get rid of the EXCEL process  ):  I has all the code in place to 'Quiet' the excel, but, it just did not work. work around was done to Kill the process as we knew no other application on server was using EXCEL.  The normal steps to quite the excel application worked just fine in console application though.   FOURTH BUMP: Code worked with one file 1 on my machine and with the other file 2 code will break. and the same code will work perfectly fine with file 2 on some other machine . We moved it to QA  ( Windows Server 2003 )and worked with every file just perfect. But , then there was another problem: one user can upload it and second cant, permissions on folder and DCOM Conifg checked. Another Detour: Uplooad the xls as it is and convert in Console application.   Lesson Learnt:  If its 'xlsx' use 'ACE Driver' or read xml within excel as recommneded by MS. If xls and you know its always going to be properly formatted  'jet Engine'  Code: Imports Microsoft.Office.Interop Private Function ConvertFile(ByVal SourceFolder As String, ByVal FileName As String, ByVal FileExtension As String)As Boolean     Dim appExcel As New Excel.Application     Dim workBooks As Excel.Workbooks = appExcel.Workbooks     Dim objWorkbook As Excel.Workbook      Try                   objWorkbook = workBooks.Open(CompleteFilePath )                            objWorkbook.SaveAs(Filename:=CObj(SourceFolder & FileName & ".csv"), FileFormat:=Excel.XlFileFormat.xlCSV)       Catch ex As Exception         GenerateAlert(ex.Message().Replace("'", "") & " Error Converting File to CSV.")         LogError(ex )         Return False      Finally                      If Not(objWorkbook is Nothing) then               objWorkbook.Close(SaveChanges:=CObj(False))           End If           ReleaseObj(objWorkbook)                                      ReleaseObj(workBooks)           appExcel.Quit()           ReleaseObj(appExcel)                                 Dim proc As System.Diagnostics.Process           For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")               proc.Kill()           Next         DeleteSourceFile(SourceFolder & FileName & FileExtension)     End Try  Return True  End Function   Private Sub ReleaseObj(ByVal o As Object)     Try      System.Runtime.InteropServices.Marshal.ReleaseComObject(o)   Catch ex As Exception           LogError(ex )   Finally      o = Nothing    End Try End Sub     Protected Sub DeleteSourceFile(Byval CompleteFilePath As string)         Try             Dim MyFile As FileInfo = New FileInfo(CompleteFilePath)             If  MyFile.Exists Then                 File.Delete(CompleteFilePath)             Else              Throw New FileNotFoundException()             End If         Catch ex As Exception             GenerateAlert( " Source File could not be deleted.")              LogError(ex)         End Try     End Sub  The code to kill the process ( Avoid it if you can ): Dim proc As System.Diagnostics.Process For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")     proc.Kill() Next

    Read the article

  • Trace File Source Adapter

    The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

    Read the article

  • Trace File Source Adapter

    The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

    Read the article

  • java.util.zip.ZipException: Error opening file When Deploying an Application to Weblogic Server

    - by lmestre
    The latest weeks we had a hard time trying to solve a deployment issue.* WebLogic Server 10.3.6* Target: WLS Cluster<21-10-2013 05:29:40 PM CLST> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.management.DeploymentException:        at weblogic.servlet.internal.WarDeploymentFactory.findOrCreateComponentMBeans(WarDeploymentFactory.java:69)        at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)        at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)        at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)        at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)        at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:67)        at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:315)        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:81)        at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:97)        at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)        at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)        at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)        at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)        at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)Caused by: java.util.zip.ZipException: Error opening file - C:\Oracle\Middleware\user_projects\domains\MyDomain\servers\MyServer\stage\myapp\myapp.war Message - error in opening zip file        at weblogic.servlet.utils.WarUtils.existsInWar(WarUtils.java:87)        at weblogic.servlet.utils.WarUtils.isWebServices(WarUtils.java:76)        at weblogic.servlet.internal.WarDeploymentFactory.findOrCreateComponentMBeans(WarDeploymentFactory.java:61) So the first idea you have with that error is that the war file is corrupted or has incorrect privileges.        We tried:1. Unzipping the  war file, the file was perfect.2. Checking the size, same size as in other environments.3. Checking the ownership of the file, same as in other environments.4. Checking the permissions of the file, same as other applications.Then we accepted the file was fine, so we tried enabling some deployment debugs, but no clues.We also tried:1. Delete all contents of <MyDomain/servers/<MyServer>/tmp> a and <MyDomain/servers/<MyServer>/cache> folders, the issue persisted.2. When renaming the application the deployment was sucessful3. When targeting to the Admin Server, deployment was also working.4. Using 'Copy this application onto every target for me' didn't help either.Finally, my friend 'Test Case' solved the issue again.I saw this name in the config.xml<jdbc-system-resource>    <name>myapp</name>    <target></target>    <descriptor-file-name>jdbc/myapp-jdbc.xml</descriptor-file-name>  </jdbc-system-resource> So, it turned out that customer had created a DataSource with the same name as the application 'myapp' in the above example.By deleting the datasource and created another exact DataSource with a different name the issue was solved.At this point, Do you know Why 'java.util.zip.ZipException: Error opening file' was occurring?Because all names is WebLogic Server need to be unique.References: http://docs.oracle.com/cd/E23943_01/web.1111/e13709/setup.htm"Assigning Names to WebLogic Server ResourcesMake sure that each configurable resource in your WebLogic Server environment has a unique name. Each, domain, server, machine, cluster, JDBC data source, virtual host, or other resource must have a unique name." Enjoy!

    Read the article

  • File sharing for small, distributed, non-technical, non-profit organization?

    - by mnmldave
    Problem: I've started volunteering for a small non-profit with fewer than five non-technical Windows users who need to share 20-30GB of files (Office documents, images, PDFs, etc.) amongst themselves online. Background: The users are accustomed to a Windows network share on a machine that backed up their data locally. An on-site "disaster" has forced them to work from their homes for awhile and to re-evaluate their file sharing needs (office was located in an old building with obvious electrical issues, etc.). Access to time from volunteers with IT experience seems to be difficult. Demonstrably minimizing energy consumption is a nice-to-have. I'm currently considering Jungle Disk (a Desktop account shared amongst the handful of employees since their TOS and my inquiries to their helpdesk seem to indicate this is permissible). It appears easy-to-use, inexpensive, secure, has backup functionality, and can scale to accomodate more data when needed. I've not used it myself though (have only used Dropbox for personal use) and systems isn't my area of expertise, so am worried I might be jumping on a bandwagon. That said, any suggestions, thoughts or similar experiences would be really appreciated.

    Read the article

  • How do I change file protections running XP on a disk from Windows Server?

    - by cdkMoose
    I had a Windows Server 2003 machine running at home, along with my desktop which I use for development. Server went belly up, but since my desktop is reasonably powerful, I figured I would move the disk from the file server (it was OK) into my XP machine to keep all of the files. Disk comes up fine and shows all of the files. I have been getting access denied errors when trying to work with some of the files. When I display attributes in Explorer, none of them are marked Read-Only. When I view properties on the directories, the Read-Only checkbox is not checked, but has a green background(which I thought meant mixed usage for files in the directory). When I click on the checkbox to clear it and click Apply, the disk does some work and all looks well. However, I continue to get the Access Denied errors, the files still don't show any Read-Only attribute and the directory properties shows the green background again on the Read-Only checkbox. I did check the box which says to apply the change to the folder and all files /subfilders under it. I am assuming that the issue relates to userids/permissions carried over from the Server install. So, why does it let me think I can change the attribute when I can't and how can I correct this problem so that the disk correctly recognizes the ids from XP?

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >