Search Results

Search found 8083 results on 324 pages for 'total newbie'.

Page 87/324 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • Router recommendation to virtualize 800 IPs

    - by delerious010
    I've recently been looking at getting some new load balancers for our environment as we are expecting to double our client base in the next 12 months. Currently we have 400 public IPS serving 800 clusters ( 2 clusters / IP due to ports ) on Coyote Point Balancers, and distributing connections to 3 web servers serving about 6GBytes outgoing, 2Gbytes in per day. If we double, this would be about 800 IPs, possibly 1600 clusters, and about 6 servers per cluster ( for a total of 9600 so called "real servers" using Barracuda's lingo ). Due to the amount of clusters, most solutions I've looked at ( Coyote, Barracuda, Loadbalancer.org ) seem to be unsure whether they'll be able to handle our planned growth, mostly due to health checks performed on the servers ... which makes total sense when you think of it. So the fine folk at loadbalancer.org recommended that we may be better off offload the 400-800 public IPs, which we require for SSL eCommerce solutions, over to a forward facing router. From that point on, the router could do some mangling to route EXT_IP:443 to INT_IP:INT_PORT which would then allow us to reduce the Load Balancer configuration to 1 or 2 clusters, thus resolving the health check problem. Does this idea make sense to yall ? Or would you have other recommendations to make ? Secondly, what router would you recommend for such an undertaking ? I'd be looking at something that has some form of failover mechanism built in. On a totally unrelated note, I've got to admit that I'm extremely pleased with the responses I got from loadbalancer.org. Their responses to my inquiries were surprisingly helpful ( i.e. I didn't feel as if I was taking to a sales guy trying to push something ). ( No I don't work for them, and sadly nor are they sending me free gear ).

    Read the article

  • Oracle Database Recovery Problem

    - by Palani
    I am very new to Oracle, and trying to restore a oracle 8i database on win 2000 server. I have one week old database backup (backup taken with exp command), and i want to restore it now. Now I am unable to login through sqlplus (got shutdown in progress error) I have a backup and i want to restore it, but oracle is not starting at all, and 'imp' command is failing. I started sqlplus / as sysdba and following is the log of what i am trying to do. Can some one guide me further. SQL> shutdown immediate; ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup; ORACLE instance started. Total System Global Area 143423516 bytes Fixed Size 75804 bytes Variable Size 58105856 bytes Database Buffers 85164032 bytes Redo Buffers 77824 bytes Database mounted. ORA-01589: must use RESETLOGS or NORESETLOGS option for database open SQL> shutdown immediate; ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup mount; ORACLE instance started. Total System Global Area 143423516 bytes Fixed Size 75804 bytes Variable Size 58105856 bytes Database Buffers 85164032 bytes Redo Buffers 77824 bytes Database mounted. SQL> alter database open; alter database open * ERROR at line 1: ORA-01589: must use RESETLOGS or NORESETLOGS option for database open SQL> alter database open resetlogs; alter database open resetlogs * ERROR at line 1: ORA-01245: offline file 1 will be lost if RESETLOGS is done ORA-01110: data file 1: 'C:\ORACLE\ORADATA\ABCD\SYSTEM01.DBF'

    Read the article

  • Why won't this script accept any arguments?

    - by Nate Wagar
    I'm trying to write an SVN post-commit hook and, strangely, am getting hung up on what should be the easiest part. The Script: set REPO="$1" set REV="$2" set SVNBIN="/opt/CollabNet_Subversion/bin/" set SSHBIN="/usr/bin/ssh" set HOST="staging.domain.net" set timeout=30 set USERNAME="svn-usr" set E_NO_CONNECT=2 set E_WRONG_PASS=3 set E_UNKOWN=25 set CHANGED=`"$SVNBIN"svnlook changed --revision $REV $REPOS` echo "Here are changes: $CHANGED" >> /var/svn/repos/www/logs/testing echo "Command: $0; Repo: $REPO; Rev: $REV; Total: $#" >> /var/svn/repos/www/logs/testing set PROJECT "" Yet when I call it, it doesn't seem to be seeing the arguments I pass to it: /var/svn/repos/www/logs> sudo ../hooks/post-commit /var/svn/repos/www 33 svnlook: missing argument: --revision Type 'svnlook help' for usage. /var/svn/repos/www/logs> cat testing Here are changes: Command: ../hooks/post-commit; Repo: ; Rev: ; Total: 1 This is on a Solaris 10 SPARC box. I'm a bit of a script newbie, but shouldn't this be really easy??

    Read the article

  • Excel Help: Data Input Help

    - by B-Ballerl
    Everyday I download data from a site that will have rows each filled with individual data for clients. I'm able to input the data into excel as a whole but after that I'm having trouble figuring out how to put it into a chart. For example Web visits time. So say Client 1 stayed for 5 min increasing his total time on the site to 20 min and Client 2 stayed for 0 min keeping his time of 10 min and they were both registered on new years eve, and R1's last login was today and R2's was yesterday. (R for some reason repersents Client, no idea why...). Client 3 hasn't been on since he registered keeping his total at 4 min So my data would look something like this for Today (20110104) R1,20101231,20110104,20 R2,20101231,20110103,10 R3,20101231,20101231,4 And this for the day before (201101030), R1,20101231,20110102,15 R2,20101231,20110103,10 R3,20101231,20101231,4 I get about 200+ client rows each day where even the names of the Client list are changing. Is it possible to import the data each day and fill it in a excel sheet where the Client number is off on the left hand side in a table, and the amount of time (Whole Number ex. 4) each day it spends on the site extend to the right under it's specific date see Picture? I've manage to create a manual sheet but have been unsucessful at getting excel to do any of it for me. Here are two pictures:

    Read the article

  • Replicated MongoDB server slower than simple shards

    - by displayName
    I tried to compare the performance of a sharded configuration against a sharded and replicated configuration. The sharded configuration consists of 8 shards each running on three different machines thereby constituting a total of 24 shards. All 8 of these shards run in the same partition on each machine. The sharded and replicated version is 8 shards again just like plain sharding, and all 8 mongods run on the same partition in each machine. But apart from this, each of these three machine now run additional 16 threads on another partition which serve as the secondary for the 8 mongods running on other machines. This is the way I prepared a sharded and replicated configuration with data chunks having replication factor of 3. Important point to note is that once the data has been loaded, it is not modified. So after primary and secondaries have synchronized then it doesn't matter which one i read from. To run the queries, I use an entirely different machine (let's call it config) which runs mongos and this machine's only purpose is to receive queries and run them on the cluster. Contrary to my expectations, plain sharding of 8 threads on each machine (total = 3 * 8 = 24) is performing better for queries than the sharded + replicated configuration. I have a script written to perform the query. So in order to time the scripts, I use time ./testScript and see the result. I tried changing the reading preference for replicated cluster by logging to mongo of config and run db.getMongo().setReadPref('secondary') and then exit the shell and run the queries like time ./testScript. The questions are: Where am i going wrong in the replication? Why is it slower than its plain sharding version? Does the db.getMongo().ReadPref('secondary') persist when i leave the shell and try to perform the query? All the four machines are running Linux and i have already increased the ulimit -n to 2048 from initial value of 1024 to allow more connections. The collections are properly distributed and all the mongods have equal number of chunks. Goes without saying that indices in both configurations are the same.

    Read the article

  • Tripwire help Required

    - by ramaperumal
    I have created the policy file in Tripwire and also I have created the rules as well mentioned below: /opt/jboss/server/gis/conf -> $(SEC_CONFIG) +aipm +c+g+a+i+s+t+u+l+M; /usr/local/gtech/eseries/ -> $(SEC_CONFIG) +a+c+g+i+s+t+u+l+M ; After running the integrity check the output should be a(Access timestamp),c (Inode timestamp (create/modify),g (File owner's group ID),i (Inode number),s (File size),t (time stamp),u (File owner's user ID),l(File is increasing in size (a "growing file"),M (MD5 hash value). I am getting the output as below: [root@xxsi1242 tripwire]# tripwire --check Parsing policy file: /etc/tripwire/tw.pol *** Processing Unix File System *** Performing integrity check... Wrote report file: /var/lib/tripwire/report/xxsi1242.gtk.gtech.com-20131106-053812.twr Open Source Tripwire(R) 2.4.1 Integrity Check Report Report generated by: root Report created on: Wed 06 Nov 2013 05:38:12 AM EST Database last updated on: Wed 06 Nov 2013 05:31:17 AM EST =============================================================================== Report Summary: =============================================================================== Host name: xxsi1242.gtk.gtech.com Host IP address: 156.24.65.171 Host ID: None Policy file used: /etc/tripwire/tw.pol Configuration file used: /etc/tripwire/tw.cfg Database file used: /var/lib/tripwire/xxsi1242.gtk.gtech.com.twd Command line used: tripwire --check =============================================================================== Rule Summary: =============================================================================== ------------------------------------------------------------------------------- Section: Unix File System ------------------------------------------------------------------------------- Rule Name Severity Level Added Removed Modified --------- -------------- ----- ------- -------- Invariant Directories 66 0 0 0 Temporary directories 33 0 0 0 * Tripwire Data Files 100 0 0 1 Tech Stack 100 0 0 0 User binaries 66 0 0 0 Tripwire Binaries 100 0 0 0 * CLPS bins 100 0 0 2 CLPS Configuration files 100 0 0 0 ESCommon 100 0 0 0 Shell Binaries 100 0 0 0 OS executables and libraries 100 0 0 0 Security Control 100 0 0 0 ESCommon Configuration 100 0 0 0 (/etc/gtech/escommon) Total objects scanned: 12358 Total violations found: 3 =============================================================================== Object Summary: =============================================================================== ------------------------------------------------------------------------------- # Section: Unix File System ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Rule Name: Tripwire Data Files (/etc/tripwire/tw.pol) Severity Level: 100 ------------------------------------------------------------------------------- Modified: "/etc/tripwire/tw.pol" ------------------------------------------------------------------------------- Rule Name: CLPS bins (/opt/jboss/server) Severity Level: 100 ------------------------------------------------------------------------------- Modified: "/opt/jboss/server/esapps1/data/hypersonic/localDB.lck" "/opt/jboss/server/gis/data/hypersonic/localDB.lck" =============================================================================== Error Report: =============================================================================== No Errors ------------------------------------------------------------------------------- *** End of report *** Note: In the output I only am getting the files which are modified. I need the detail output for this. But unfortunately I am not getting what I expected. Please help me to proced further.

    Read the article

  • Google Chrome warning that Javascript is disabled

    - by kirchoffs415
    I hope somebody can help. I keep getting the following message when I log on: Your Javascript is disabled. Limited functionality is available. It will stay for maybe a day sometimes two. I have uninstalled javascript and reinstalled but still the same. I am using chrome. Any help would be grateful many thanks Dominic My system spec is as follows System InformationOS Name Microsoft® Windows Vista™ Home Premium Version 6.0.6002 Service Pack 2 Build 6002 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DOM-PC System Manufacturer Dell Inc. System Model Inspiron 1545 System Type X86-based PC Processor Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Dell Inc. A05, 25/02/2009 SMBIOS Version 2.4 Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume3 Locale United Kingdom Hardware Abstraction Layer Version = "6.0.6002.18005" User Name DOM-PC\DOM Time Zone GMT Standard Time Installed Physical Memory (RAM) 3.00 GB Total Physical Memory 2.96 GB Available Physical Memory 1.38 GB Total Virtual Memory 5.89 GB Available Virtual Memory 4.25 GB Page File Space 3.00 GB Page File C:\pagefile.sys My System Specs

    Read the article

  • Lost Permission on Files using wrong chmod syntax Centos 5.5

    - by alloutfallout
    Hello, I was trying to remove write permissions on an entire directory, and I used the incorrect command: chmod 644 -r sites/default I meant to type chmod -R 644 sites/default The result was this: chmod: cannot access `644': No such file or directory $ ls -als sites total 24 4 drwxr-xr-x 5 user group 4096 Jan 11 10:54 . 4 drwxrwxr-x 14 user group 4096 Jan 11 10:11 .. 4 drwxr-xr-x 4 user group 4096 Jan 5 01:25 all 4 d-w------- 3 user group 4096 Jan 11 10:43 default 4 -rw-r--r-- 1 user group 1849 Apr 15 2010 example.sites.php I fixed the permissions on the default folder with $ chmod 644 sites/default But, the following ls shows a all the files with red backgrounds and question marks. I can't access any files unless I am root. $ ls -als sites/default total 0 ? ?--------- ? ? ? ? ? . ? ?--------- ? ? ? ? ? .. ? ?--------- ? ? ? ? ? default.settings.php ? ?--------- ? ? ? ? ? files ? ?--------- ? ? ? ? ? settings.php When I log in as root, I can edit all of the files, and their permissions appear correctly. I do not know how to undo the damage caused by using -r with chmod instead of -R. Any Suggestions?

    Read the article

  • Do you really need cable management for a cabinet with just switches and patch panels?

    - by ObligatoryMoniker
    We are about to start wiring out a building expansion and our vendor has laid out the racks in the following configuration: Option 1 1U Fiber patch panel 2U Cable Manager 2U 48 port Patch Panel 2U Cable Manager 2U 48 port Patch Panel 2U Cable Manager 1U 48 port Switch 2U Cable Manager 1U 48 port Switch Total = 15U All the patch panels would be connected to the switches with 1ft+ cables fed through cable management. What I am considering instead is: Option 2 1U Fiber patch panel 1U 24 port Patch Panel 1U 48 port Switch 2U 48 port Patch Panel 1U 48 port Switch 2U 48 port Patch Panel Total = 8U All of the patch panels would be connected to the switches with .5 ft cables directly on their face with the top 24 ports of each switch patched to the patch panel above it and the bottom 24 ports of each switch patched to the patch panel beneath it which would not require any cable management. If I go with option 2 it save all of the space used by cable management and allows us to keep adding on switches and patch panels at the end without having to re-cable all of the patch panels above. Our vendor has indicated that this is not best practice and that .5ft cables will introduce cross talk. I could understand that being the case if we were connecting the .5 ft cable directly into another switch but we are connecting it to a patch panel that likely has another 150 ft cable run from the back of the patch panel out to the port in the building in which case the real resulting cable is 150.5 ft at minimum before even connecting it to a PC. It seems like it makes much more sense to go with option 2. It is easier to expand, saves space, and saves money on cabling and cable management. Does this kind of configuration make sense or is there a legitimate reason to choose Option 1 over Option 2?

    Read the article

  • How to allow writing to a mounted NFS partition

    - by Cerin
    How do you allow a specific user permission to write to an NFS partition? I've mounted an NFS share on my localhost (a Fedora install), and I can read and write as root, but I'm unable to write as the apache user, even though all the files and directories in the share on my localhost and remote host are owned by apache. For example, I've mounted it via this line in my /etc/fstab: remotehost:/data/media /data/media nfs _netdev,soft,intr,rw,bg 0 0 And both locations are owned by apache: [root@remotehost ~]# ls -la /data total 24 drwxr-xr-x. 6 root root 4096 Jan 6 2011 . dr-xr-xr-x. 28 root root 4096 Oct 31 2011 .. drwxr-xr-x 4 apache apache 4096 Jan 14 2011 media [root@localhost ~]# ls -la /data total 16 drwxr-xr-x 4 apache apache 4096 Dec 7 2011 . dr-xr-xr-x. 27 root root 4096 Jun 11 15:51 .. drwxrwxrwx 5 apache apache 4096 Jan 31 2011 media However, when I try and write as the apache user, I get a "Permission denied" error. [root@localhost ~]# sudo -u apache touch /data/media/test.txt' touch: cannot touch `/data/media/test.txt': Permission denied But of course it works fine as root. What am I doing wrong?

    Read the article

  • If I partition a drive connected via eSata will it show different partitions when connected via USB?

    - by jeffreypriebe
    I have an odd problem with an external drive. I'm formatting it connected to my laptop prior to connecting it to my router. The HDD enclosure has both an eSata and USB connections. Generally, I connect it via eSata to my laptop. I created my partitions and connected it to the router, but I see partition information that is different than what I created. After chasing leads concerning large HDD size, I mindlessly connected the HDD to my laptop with USB. Lo! I see the same partitions as the router. Attached are screenshots using the same program and the HDD in question. The only difference is the connection. For the first, I connected via eSata and hit "refresh" on the partition program. Then, turned off the HDD, disconnected the eSata cable, and connected via USB. Power and refresh. eSata: reports a total HDD size of 2328 GB, with four partitions (the third being 1.96TB) USB: reports a total HDD size of 280 GB, with three partitions (the third being 279 GB) Any idea why this is happening? It looks like it clearly is an issue of the 4K sector size and not playing nice with the USB enclosure. I tried it eSata and USB in Windows and Linux and it appears consistently that eSata is reporting correctly, USB incorrectly.

    Read the article

  • JVM disappeared on Mac OS X Snow Leopard 10.6.8

    - by weisjohn
    I'm working in Eclipse one night, (also using Android's DDMS from the commandline). The next morning, I open the lid... attempt to run Eclipse and get an error. me$ sudo /Applications/eclipse/eclipse JavaVM: requested Java version ((null)) not available. Using Java at "" instead. JavaVM: Failed to load JVM: /bundle/Libraries/libserver.dylib So I then attempt to find out where my JDKs are pointed: me$ ls -la /System/Library/Frameworks/JavaVM.framework/Versions/ total 64 drwxr-xr-x 12 root wheel 408 Nov 16 10:44 . drwxr-xr-x 12 root wheel 408 Sep 7 09:39 .. lrwxr-xr-x 1 root wheel 5 Sep 7 17:07 1.3 -> 1.3.1 drwxr-xr-x 3 root wheel 102 Dec 2 2009 1.3.1 lrwxr-xr-x 1 root wheel 10 Sep 7 17:07 1.4 -> CurrentJDK lrwxr-xr-x 1 root wheel 10 Sep 7 17:07 1.4.2 -> CurrentJDK lrwxr-xr-x 1 root wheel 10 Sep 7 17:07 1.5 -> CurrentJDK lrwxr-xr-x 1 root wheel 10 Sep 7 17:07 1.5.0 -> CurrentJDK lrwxr-xr-x 1 root wheel 10 Sep 7 17:07 1.6 -> CurrentJDK drwxr-xr-x 9 root wheel 306 Nov 16 10:44 A lrwxr-xr-x 1 root wheel 1 Sep 7 17:07 Current -> A lrwxr-xr-x 1 root wheel 59 Sep 7 17:07 CurrentJDK -> /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents Everything looks normal so far... me$ ls -la /System/Library/Java/JavaVirtualMachines/ total 0 drwxr-xr-x 2 root wheel 68 Nov 16 10:44 . drwxr-xr-x 5 root wheel 170 Nov 16 10:44 .. Apparently, my virtual machines have been deleted or moved? I'll probably be able to just re-install Java, but does anyone have any insight into why this may have happened or how to prevent in the future?

    Read the article

  • Cannot load from raid with grub

    - by Andrew Answer
    I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... This is my partial fdisk -l output: Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Anybody can resolve this issue? I have big headache with this.

    Read the article

  • Slow performance of MySQL database on one server and fast on another one, with similar configurations

    - by Alon_A
    We have a web application that run on two servers of GoDaddy. We experince slow preformance on our production server, although it has stronger hardware then the testing one, and it is dedicated. I'll start with the configurations. Testing: CentOS Linux 5.8, Linux 2.6.18-028stab101.1 on i686 Intel(R) Xeon(R) CPU L5609 @ 1.87GHz, 8 cores 60 GB total, 6.03 GB used Apache/2.2.3 (CentOS) MySQL 5.5.21-log PHP Version 5.3.15 Production: CentOS Linux 6.2, Linux 2.6.18-028stab101.1 on x86_64 Intel(R) Xeon(R) CPU L5410 @ 2.33GHz, 8 cores 120 GB total, 2.12 GB used Apache/2.2.15 (CentOS) MySQL 5.5.27-log - MySQL Community Server (GPL) by Remi PHP Version 5.3.15 We are running the same code on both servers. The Problem We have some function that executes ~30000 PDO-exec commands. On our testing server it takes about 1.5-2 minutes to complete and our production server it can take more then 15 minutes to complete. As you can see here, from qcachegrind: Researching the problem, we've checked the live graphs on phpMyAdmin and discovered that the MySQL server on our testing server was preforming at steady level of 1000 execution statements per 2 seconds, while the slow production MySQL server was only 250 executions statements per 2 seconds and not steady at all, jumping from 0 to 250 every seconds. You can clearly see it in the graphs: Testing server: Production server: You can see here the comparison between both of the configuration of the MySQL servers.Left is the fast testing and right is the slow production. The differences are highlighted, but I cant find anything that can cause such a behavior difference, as the configs are mostly the same. Maybe you can see something that I cant see. Note that our tables are all InnoDB, so the MyISAM difference is (probably) not relevant. Maybe it is the MySQL Community Server (GPL) that is installed on the production server that can cause the slow performance? Or maybe it needs to be configured differently for 64bit ? I'm currently out of ideas...

    Read the article

  • Oracle Database Recovery Problem

    - by Palani
    I am very new to Oracle, and trying to restore a oracle 8i database on win 2000 server. I have one week old database backup (backup taken with exp command), and i want to restore it now. Now I am unable to login through sqlplus (got shutdown in progress error) I have a backup and i want to restore it, but oracle is not starting at all, and 'imp' command is failing. I started sqlplus / as sysdba and following is the log of what i am trying to do. Can some one guide me further. SQL> shutdown immediate; ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup; ORACLE instance started. Total System Global Area 143423516 bytes Fixed Size 75804 bytes Variable Size 58105856 bytes Database Buffers 85164032 bytes Redo Buffers 77824 bytes Database mounted. ORA-01589: must use RESETLOGS or NORESETLOGS option for database open SQL> shutdown immediate; ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup mount; ORACLE instance started. Total System Global Area 143423516 bytes Fixed Size 75804 bytes Variable Size 58105856 bytes Database Buffers 85164032 bytes Redo Buffers 77824 bytes Database mounted. SQL> alter database open; alter database open * ERROR at line 1: ORA-01589: must use RESETLOGS or NORESETLOGS option for database open SQL> alter database open resetlogs; alter database open resetlogs * ERROR at line 1: ORA-01245: offline file 1 will be lost if RESETLOGS is done ORA-01110: data file 1: 'C:\ORACLE\ORADATA\ABCD\SYSTEM01.DBF'

    Read the article

  • Ruby net:LDAP returns "code = 53 message = Unwilling to perform" error

    - by Yong
    Hi, I am getting this error "code = 53, message = Unwilling to perform" while I am traversing the eDirectory treebase = "ou=Users,o=MTC". My ruby script can read about 126 entries from eDirectory and then it stops and prints out this error. I do not have any clue of why this is happening. I am using the ruby net:LDAP library version 0.0.4. The following is an excerpt of the code. require 'rubygems' require 'net/ldap' ldap = Net::LDAP.new :host => "10.121.121.112", :port => 389, :auth => {:method => :simple, :username => "cn=abc,ou=Users,o=MTC", :password => "123" } filter = Net::LDAP::Filter.eq( "mail", "*mtc.ca.gov" ) treebase = "ou=Users,o=MTC" attrs = ["mail", "uid", "cn", "ou", "fullname"] i = 0 ldap.search( :base => treebase, :attributes => attrs, :filter => filter ) do |entry| puts "DN: #{entry.dn}" i += 1 entry.each do |attribute, values| puts " #{attribute}:" values.each do |value| puts " --->#{value}" end end end puts "Total #{i} entries found." p ldap.get_operation_result Here is the output and the error at the end. Thank you very much for your help. DN: cn=uvogle,ou=Users,o=MTC mail: --->[email protected] fullname: --->Ursula Vogler ou: --->Legislation and Public Affairs dn: --->cn=uvogle,ou=Users,o=MTC cn: --->uvogle Total 126 entries found. OpenStruct code=53, message="Unwilling to perform"

    Read the article

  • lvm mirroring space unavailable.

    - by Bryan Ward
    I am trying to migrate my data on lvm to two new disks, and setup mirroring between the two. I have successfully migrated all of the data to the first of the two disks, leaving the second one completely available as a mirror. I verified this using pvdisplay -m /dev/sd{g,h}1 --- Physical volume --- PV Name /dev/sdg1 VG Name vg PV Size 931.51 GiB / not usable 3.19 MiB Allocatable yes PE Size 4.00 MiB Total PE 238466 Free PE 82866 Allocated PE 155600 PV UUID v2nc3j-EFBR-QpuG-xgro-Rm59-fmu6-IB3QcR --- Physical Segments --- Physical extent 0 to 49999: Logical volume /dev/vg/videos Logical extents 0 to 49999 Physical extent 50000 to 99999: Logical volume /dev/vg/home Logical extents 0 to 49999 Physical extent 100000 to 129999: Logical volume /dev/vg/music Logical extents 0 to 29999 Physical extent 130000 to 155599: Logical volume /dev/vg/videos Logical extents 50000 to 75599 Physical extent 155600 to 238465: FREE --- Physical volume --- PV Name /dev/sdh1 VG Name vg PV Size 931.51 GiB / not usable 3.19 MiB Allocatable yes PE Size 4.00 MiB Total PE 238466 Free PE 238466 Allocated PE 0 PV UUID LuTrem-WcsZ-qw7l-2CDS-lLKI-wdq0-QEXhLf --- Physical Segments --- Physical extent 0 to 238465: FREE Then when I try to mirror the home logical volume for example, it says that I do not have sufficient space. I used lvconvert -m1 vg/home and the output was: Insufficient suitable allocatable extents for logical volume : 50000 more required Unable to allocate extents for mirror(s). This puzzling to me because it appears as if there is plenty of space on the second disk to mirror. Is there something I have done wrong here? Or is there a way to explicitly tell LVM where to put each leg of the mirror? I'm using lvm2.

    Read the article

  • Dual pane file manager for Mac OS X

    - by Alex Kaushovik
    Is there a good customizable dual-pane file manager for Mac like Total Commander / Far Manager in Windows, or like Krusader / Midnight Commander in Linux? I used to work on Windows for quite a while and mostly used Far Manager and sometimes Total Commander, then I switched to Ubuntu Linux and used Krusader, now I switched to Mac OS (Snow Leopard) and I'm having a hard time trying to find a good file manager... Many of the existing applications are trying to replace the Finder with "multimedia capabilities nobody cares about in file manager - IMHO" (Path Finder, ForkLift), some of them are almost good dual-pane file managers (couldn't remember examples), but none of them worked for me mostly because of one reason: I couldn't integrate my file/folder comparison utility (Araxis Merge for Mac) with them... The way it worked for me in Windows and Linux is that I was setting the cursor on one file in the left pane, then setting the right-pane cursor on another file in right pane, then I pressed a hotkey that launched Araxis Merge with those to files/folders comparison results. It was very easy to set up in Far Manager (Windows) and Krusader (Linux, actually in Linux I used "Meld" instead of Araxis Merge...) The tool I'm looking for doesn't necessarily has to be free... Thank you!

    Read the article

  • IPtables - Accept Arbitrary Packets

    - by Asad Moeen
    I've achieved a lot on blocking attacks on GameServers but I'm stuck on something. I've blocked major requests of game-server which it aceepts in the form "\xff\xff\xff\xff" which can be followed by the actual queries like get status or get info to make something like "\xff\xff\xff\xff getstatus " but I see other queries if sent to the game-server will cause it to reply with a "disconnect" packet with the same rate as input so if the input rate is high then the high output of "disconnect" might give lag to the server. Hence I want to block all queries except the ones actual clients use which I suppose are in the form "\xff\xff\xff\xff" or .... so, I tried using this rule : -A INPUT -p udp -m udp -m u32 ! --u32 0x1c=0xffffffff -j ACCEPT -A INPUT -p udp -m udp -m recent --set --name Total --rsource -A INPUT -p udp -m udp -m recent --update --seconds 1 --hitcount 20 --name Total --rsource -j DROP Now where the rule does accept the clients but it only blocks requests in the form "\xff\xff\xff\xff getstatus " ( by which GameServer replies with status ) and not just "getstatus " ( by which GameServer replies with disconnect packet ). So I suppose the accept rule is accepting the simple "string" as well. I actually want it to also block the non-(\xff) queries. So how do I modify the rule?

    Read the article

  • Cannot write samba shares

    - by Batsu
    Running samba 3.5 on Red Hat Enterprise 6.1 I'm having issues sharing two folders. Here is the output of testparm: [global] workgroup = DOMAINNAME server string = Samba Server Version %v interfaces = lo, eth1 bind interfaces only = Yes map to guest = Bad User log file = /var/log/samba/log.%m max log size = 50 idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 hosts allow = 10.50.183.48, 10.50.184.41, 10.50.184.199, 10.50.183.160, 127.0.0.1 hosts deny = 0.0.0.0/0 cups options = raw [test] comment = test folder path = /usr/local/samba valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 directory mask = 0775 [test2] comment = another test path = /home/claudio/tst valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 From the Windows XP machine I'm connecting from I'm able to read test but not write, while for test2 I can't even access the folder (though I can see it listed). ls -l /usr/local ... drwxrwxrwx. 2 claudio claudio 4096 Dec 3 10:39 samba ... ls -l /user/local/samba total 32 -rwxrwxrwx. 1 claudio claudio 9 Nov 29 16:26 asd.txt -rwxrwxrwx. 1 claudio claudio 728 Dec 3 10:16 out.txt ... ls -l /home/claudio/ ... drwxrwxr-x. 2 claudio claudio 4096 Dec 3 09:57 tst ... ls -l /home/claudio/tst total 4 -rw-rw-r--. 1 claudio claudio 4 Dec 3 09:57 asd.txt Any suggestion?

    Read the article

  • rsnapshot - not correctly archiving mysql databases

    - by Tiffany Walker
    My rsnapshot configuration: snapshot_root /.snapshots/ backup /home/user localhost/ backup_script /usr/local/backup_mysql.sh localhost/mysql/ Using this file: NOW=$(date +"%m-%d-%Y") # mm-dd-yyyy format FILE="" # used in a loop ### Server Setup ### #* MySQL login user name *# MUSER="root" #* MySQL login PASSWORD name *# MPASS="YOUR-PASSWORD" #* MySQL login HOST name *# MHOST="127.0.0.1" #* MySQL binaries *# MYSQL="$(which mysql)" MYSQLDUMP="$(which mysqldump)" GZIP="$(which gzip)" # get all database listing DBS="$($MYSQL -u $MUSER -h $MHOST -p$MPASS -Bse 'show databases')" # start to dump database one by one for db in $DBS do FILE=$BAK/mysql-$db.$NOW-$(date +"%T").gz # gzip compression for each backup file $MYSQLDUMP --single-transaction -u $MUSER -h $MHOST -p$MPASS $db | $GZIP -9 > $FILE done It dumps the databases under / I then tried with the following: http://bash.cyberciti.biz/backup/rsnapshot-remote-mysql-backup-shell-script/ I got: rsnapshot hourly ---------------------------------------------------------------------------- rsnapshot encountered an error! The program was invoked with these options: /usr/bin/rsnapshot hourly ---------------------------------------------------------------------------- ERROR: backup_script /usr/local/backup_mysql.sh returned 1 WARNING: Rolling back "localhost/mysql/" ls -la /.snapshots/hourly.0/localhost/mysql total 8 drwxr-xr-x 2 root root 4096 Nov 23 17:43 ./ drwxr-xr-x 4 root root 4096 Nov 23 18:20 ../ What exactly am I doing wrong? EDIT: # /usr/local/backup_mysql.sh *** Dumping MySQL Database *** Database> information_schema..cphulkd..eximstats..horde..leechprotect..logaholicDB_ns1..modsec..mysql..performance_schema..roundcube..test.. *** Backup done [ files wrote to /.snapshots/tmp/mysql] *** root@ns1 [~]# ls -la /.snapshots/tmp/mysql total 8040 drwxr-xr-x 2 root root 4096 Nov 23 18:41 ./ drwxr-xr-x 3 root root 4096 Nov 23 18:41 ../ -rw-r--r-- 1 root root 1409 Nov 23 18:41 cphulkd.18_41_45pm.gz -rw-r--r-- 1 root root 113522 Nov 23 18:41 eximstats.18_41_45pm.gz -rw-r--r-- 1 root root 4583 Nov 23 18:41 horde.18_41_45pm.gz -rw-r--r-- 1 root root 71757 Nov 23 18:41 information_schema.18_41_45pm.gz -rw-r--r-- 1 root root 692 Nov 23 18:41 leechprotect.18_41_45pm.gz -rw-r--r-- 1 root root 2603 Nov 23 18:41 logaholicDB_ns1.18_41_45pm.gz -rw-r--r-- 1 root root 745 Nov 23 18:41 modsec.18_41_45pm.gz -rw-r--r-- 1 root root 138928 Nov 23 18:41 mysql.18_41_45pm.gz -rw-r--r-- 1 root root 1831 Nov 23 18:41 performance_schema.18_41_45pm.gz -rw-r--r-- 1 root root 3610 Nov 23 18:41 roundcube.18_41_45pm.gz -rw-r--r-- 1 root root 436 Nov 23 18:41 test.18_41_47pm.gz MySQL Backup seems fine.

    Read the article

  • AVConv increases song duration when converting MP3

    - by chauffch
    I am struggling with the following issue. I want to convert an MP3 ADTS into pure a MP3. I am using AVConv on Ubuntu 12.10. The outcome is a file that has the same size, but the duration is now longer. $ ls -l total 6436 -rw-r--r-- 1 teuf teuf 6586514 nov. 25 09:25 Blindsided_Bon_Iver.mpga $ file Blindsided_Bon_Iver.mpga Blindsided_Bon_Iver.mpga: MPEG ADTS, layer III, v1, 160 kbps, 44.1 kHz, JntStereo $ avconv -i Blindsided_Bon_Iver.mpga -c copy Blindsided_Bon_Iver.mp3 avconv version 0.8.4-4:0.8.4-0ubuntu0.12.04.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:50:25 with gcc 4.6.3 [mp3 @ 0x8c6e240] max_analyze_duration reached Input #0, mp3, from 'Blindsided_Bon_Iver.mpga': Duration: 00:05:29.29, start: 0.000000, bitrate: 160 kb/s Stream #0.0: Audio: mp3, 44100 Hz, stereo, s16, 160 kb/s Output #0, mp3, to 'Blindsided_Bon_Iver.mp3': Metadata: TSSE : Lavf53.21.0 Stream #0.0: Audio: libmp3lame, 44100 Hz, stereo, 160 kb/s Stream mapping: Stream #0:0 -> #0:0 (copy) Press ctrl-c to stop encoding size= 6432kB time=329.30 bitrate= 160.0kbits/s video:0kB audio:6432kB global headers:0kB muxing overhead 0.002080% $ ls -l total 12868 -rw-rw-r-- 1 teuf teuf 6586129 nov. 27 22:26 Blindsided_Bon_Iver.mp3 -rw-r--r-- 1 teuf teuf 6586514 nov. 25 09:25 Blindsided_Bon_Iver.mpga $ file Blindsided_Bon_Iver.mp3 Blindsided_Bon_Iver.mp3: Audio file with ID3 version 2.4.0, contains: MPEG ADTS, layer III, v1, 32 kbps, 44.1 kHz, Stereo Amarok shows the new file has a duration of 25:27 and has a lot of silence. Am I using an incorrect option? Is it a bug in AVConv? Any ideas how to fix it?

    Read the article

  • memory tuning with rails/unicorn running on ubuntu

    - by user970193
    I am running unicorn on Ubuntu 11, Rails 3.0, and Ruby 1.8.7. It is an 8 core ec2 box, and I am running 15 workers. CPU never seems to get pinned, and I seem to be handling requests pretty nicely. My question concerns memory usage, and what concerns I should have with what I am seeing. (if any) Here is the scenario: Under constant load (about 15 reqs/sec coming in from nginx), over the course of an hour, each server in the 3 server cluster loses about 100MB / hour. This is a linear slope for about 6 hours, then it appears to level out, but still maybe appear to lose about 10MB/hour. If I drop my page caches using the linux command echo 1 /proc/sys/vm/drop_caches, the available free memory shoots back up to what it was when I started the unicorns, and the memory loss pattern begins again over the hours. Before: total used free shared buffers cached Mem: 7130244 5005376 2124868 0 113628 422856 -/+ buffers/cache: 4468892 2661352 Swap: 33554428 0 33554428 After: total used free shared buffers cached Mem: 7130244 4467144 2663100 0 228 11172 -/+ buffers/cache: 4455744 2674500 Swap: 33554428 0 33554428 My Ruby code does use memoizations and I'm assuming Ruby/Rails/Unicorn is keeping its own caches... what I'm wondering is should I be worried about this behaviour? FWIW, my Unicorn config: worker_processes 15 listen "#{CAPISTRANO_ROOT}/shared/pids/unicorn_socket", :backlog = 1024 listen 8080, :tcp_nopush = true timeout 180 pid "#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid" GC.respond_to?(:copy_on_write_friendly=) and GC.copy_on_write_friendly = true before_fork do |server, worker| STDERR.puts "XXXXXXXXXXXXXXXXXXX BEFORE FORK" print_gemfile_location defined?(ActiveRecord::Base) and ActiveRecord::Base.connection.disconnect! defined?(Resque) and Resque.redis.client.disconnect old_pid = "#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid.oldbin" if File.exists?(old_pid) && server.pid != old_pid begin Process.kill("QUIT", File.read(old_pid).to_i) rescue Errno::ENOENT, Errno::ESRCH # already killed end end File.open("#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid.ok", "w"){|f| f.print($$.to_s)} end after_fork do |server, worker| defined?(ActiveRecord::Base) and ActiveRecord::Base.establish_connection defined?(Resque) and Resque.redis.client.connect end Is there a need to experiment enforcing more stringent garbage collection using OobGC (http://unicorn.bogomips.org/Unicorn/OobGC.html)? Or is this just normal behaviour, and when/as the system needs more memory, it will empty the caches by itself, without me manually running that cache command? Basically, is this normal, expected behaviour? tia

    Read the article

  • Top cpu% analyis

    - by user111196
    I would like the know in what cpus % can be considered in save range and also load average? Which indication will give signal something is wrong with the server? top - 22:55:51 up 3 days, 6:39, 1 user, load average: 0.53, 0.43, 0.37 Tasks: 229 total, 2 running, 227 sleeping, 0 stopped, 0 zombie Cpu0 : 16.2%us, 0.7%sy, 0.0%ni, 82.8%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu1 : 10.5%us, 0.7%sy, 0.0%ni, 88.5%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu2 : 9.0%us, 0.0%sy, 0.0%ni, 91.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 0.3%us, 0.3%sy, 0.0%ni, 99.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 1.0%us, 0.0%sy, 0.0%ni, 99.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu5 : 44.8%us, 2.6%sy, 0.0%ni, 37.0%id, 0.0%wa, 9.4%hi, 6.2%si, 0.0%st Cpu6 : 3.0%us, 0.0%sy, 0.0%ni, 96.7%id, 0.0%wa, 0.0%hi, 0.4%si, 0.0%st Cpu7 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16468596k total, 2423908k used, 14044688k free, 200172k buffers

    Read the article

  • Is 2 GB of RAM better than 2.5 GB?

    - by pibboater
    My laptop has two slots for RAM, and currently has two 512 MB chips, for 1 GB. Windows XP is running terribly slow on it, so I want to upgrade the RAM. I could buy two 1 GB chips to replace both of the current 512 MB chips, to give me 2 GB of RAM. Or, the price is the same to buy one 2 GB chip, to replace just one of the 512 MB chips, and give me 2.5 GB total. The RAM it takes is PC2-4200 533MHz DDR2. What do you think would be better: buying two 1 GB chips so it can take advantage of dual-channel operation, or buying one 2 GB chip to end up with more total RAM but not dual-channel operation? Like I said, price is the same, so performance is the only consideration. I'm not doing anything especially intensive like video or photo editing -- just having multiple Office programs open, playing music, browsers, etc., but currently even opening the first application takes forever. If it matters, the laptop is a Toshiba Qosmio G25-AV513 running Windows XP Media Center SP3. Thanks! Kevin

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >