Search Results

Search found 3920 results on 157 pages for 'advanced'.

Page 88/157 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • How do I require use of the 5 GHz band when connecting to a Wireless N access point?

    - by cqcallaw
    What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

    Read the article

  • LiveMeeting VC PowerShell PASS – Troubleshooting SQL Server with PowerShell

    - by Laerte Junior
    Guys, join me on Wednesday July 18th 12 noon EDT (GMT -4) for a presentation called Troubleshooting SQL Server With PowerShell. It will be in English, so please make allowances for this. I’m sure that you’re aware that my English is not perfect, but it is not so bad. I will do my best, you can be sure. The registration link will be available soon from PowerShell.sqlpass.org, so I hope to see you there. It will be a session without slides. Just code; pure PowerShell code. Trust me, We will see a lot of COOL stuff.Big thanks to Aaron Nelson (@sqlvariant) for the opportunity! Here are some more details about the presentation: “Troubleshooting SQL Server with PowerShell – The Next Level’ It is normal for us to have to face poorly performing queries or even complete failure in our SQL server environments. This can happen for a variety of reasons including poor Database Designs, hardware failure, improperly-configured systems and OS Updates applied without testing. As Database Administrators, we need to take precaution to minimize the impact of these problems when they occur, and so we need the tools and methodology required to identify and solve issues quickly. In this Session we will use PowerShell to explore some common troubleshooting techniques used in our day-to-day work as s DBA. This will include a variety of such activities including Gathering Performance Counters in several servers at the same time using background jobs, identifying Blocked Sessions and Reading & filtering the SQL Error Log even if the Instance is offline The approach will be using some advanced PowerShell techniques that allow us to scale the code for multiple servers and run the data collection in asynchronous mode.

    Read the article

  • Where to Start?

    - by freemann098
    my name is Chase. I've been programming for over 3 years now and I've made very little progress towards game development. I blame myself for it due to reasons. I have experience in many languages such as C++, C#, and Java. I have a little bit of knowledge in JavaScript/HTML and Python. My question is where to start on actually understanding jumping into game development. Whenever I watch game development tutorials it mostly makes sense until points of things like OpenGL or advanced topics that make no sense at all. An example is something like glOrhho Matrix or whatever. Videos either don't explain things like this or they're not explained very well. Do I not know enough basics? I find myself always copying code from a video but understanding very little of it. It's like i'm memorizing things I don't understand which makes it hard to program at all. If I were to want to get to the point where I could write my own game engine or just a game by myself in general in C++ using at the most documentation how would I start at mastering to that level. Should I learn C first, or get really good at basics in general with C++. I know there is a similar posted question on this site but it's not the same due to the fact the person asking the question has a well knowledge level in programming. I'm stuck in a loop of learning the same things but if I go farther I don't understand. I'm stuck in the same spot and need to make progress.

    Read the article

  • How do I modify these VPN connection settings for Xfce?

    - by Dave M G
    I have signed up for a VPN (Virtual Private Network) service, and I configured it for use on my computer that runs Gnome Classic with the following instructions: In Terminal, install openvpn packages with sudo apt-get install network-manager-openvpn. 1. Restart the network manager with sudo restart network-manager 2. Run sudo wget https://www.xxxxxxx.com/ovpnconfigure.zip 3. Extract the files from the zip with unzip ovpnconfigure.zip. 4. Move cert.crt to /etc/openvpn 5. Open the Network Manager on the menu bar. 6. Choose add and select the OpenVPN connection type, and click Create. 7. Enter Private Internet Access SSL for the Connection Name. 8. Enter xxxxxx.xxxxxxxx.com for the Gateway 9. Select Password and enter your login credentials. 10. Browse and select the CA Certificate we saved in Step 3. 11. Choose Advanced and enable LZO Compression. 12. Apply and exit. 13. Connect using the Network Manager. It worked, but now I want to set up access to the same VPN service on another machine that runs Mythbuntu, which uses Xfce as its desktop manager. So every point from 5 on doesn't apply. How can I modify the above instructions so that I can get my VPN service working with Xfce. As a further note, while I can access the Xfce desktop directly if I need to, it's more convenient for me to access it via the command line and SSH from on of my other computers. A command line process would be ideal. (I looked for this, and found instructions only for PPTP access, whereas I need OpenVPN.)

    Read the article

  • Abstract Factory Method and Polymorphism

    - by Scotty C.
    Being a PHP programmer for the last couple of years, I'm just starting to get into advanced programming styles and using polymorphic patterns. I was watching a video on polymorphism the other day, and the guy giving the lecture said that if at all possible, you should get rid of if statements in your code, and that a switch is almost always a sign that polymorphism is needed. At this point I was quite inspired and immediately went off to try out these new concepts, so I decided to make a small caching module using a factory method. Of course the very first thing I have to do is create a switch to decide what file encoding to choose. DANG! class Main { public static function methodA($parameter='') { switch ($parameter) { case 'a': $object = new \name\space\object1(); break; case 'b': $object = new \name\space\object2(); break; case 'c': $object = new \name\space\object3(); break; default: $object = new \name\space\object1(); } return (sekretInterface $object); } } At this point I'm not really sure what to do. As far as I can tell, I either have to use a different pattern and have separate methods for each object instance, or accept that a switch is necessary to "switch" between them. What do you guys think?

    Read the article

  • Installing Ubuntu Server 12.04 as a software RAID 1 mirror fails to boot

    - by Jeff Atwood
    I'm installing a few new Ubuntu Server 12.04 LTS servers, and they have two 512 GB SSDs. I want them to use software RAID 1 mirroring, so I was following this document religiously step by step: https://help.ubuntu.com/12.04/serverguide/advanced-installation.html To summarize the above official documentation: to set up a software RAID 1 mirror in Ubuntu Server, you choose manual partitioning during the setup, and do this on each drive: "swap" partition of roughly RAM size "physical volume for RAID" partition for remaining drive size After that, you set up the RAID 1 mirror using the RAID partitions on drive A and B, make it ext4 and containing the root filesystem partition. Setup continues from there just fine. One caveat: I was completely unable to select the "physical volume for RAID" as bootable. When I tried to do that in setup, it had no effect: I could press enter on the "make bootable" option all day long and nothing would ever change. However, after install successfully completes, I have a big problem: the system won't boot! I get Reboot and Select proper boot device or Insert Boot Media in selected Boot device and press a key What did I do wrong? Why can't I mark that "physical volume for RAID" partition bootable during Ubuntu Server setup? Is there some way for me to make the physical volumes for RAID bootable after the fact, perhaps from a live CD or something?

    Read the article

  • "Missing Operating System" after installing Ubuntu 12.04 from a CD on a Macbook Pro

    - by Pierre
    I followed this guide to install Ubuntu 12.04 on my Macbook Pro 8,2 (late 2011): https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation I used a CD. I synced the partition table on rEFIt, and it went fine. I do have an icon to boot on Linux, but when I launch it, after a few seconds I have "Missing Operating System" displayed, and that's all... How can I fix that? The only thing I see is, in the guide, it is mentioned this: On the last dialog of the installer, be sure to click the “Advanced” button and choose to install the boot loader (grub) to your root Ubuntu partition, for example /dev/sda3. This will be the only partition with the EXT4 file system. In Ubuntu 12.04 installation process, there is not such an option, but there is a dropdown menu to select where the grub bootloader should be installed. It was /dev/sda by default, but I selected my root Ubuntu partition (in my case, /dev/sda5). I got a warning message (but actually, it was the same warning message even when I selected /dev/sda), and I continued the installation... Thanks in advance for your help!

    Read the article

  • Best way to go for simple online multi-player games?

    - by Mr_CryptoPrime
    I want to create a trivia game for my website. The graphic design does not have to be too fancy, probably no more advanced than a typical flash game. It needs to be secure because I want users to be able to play for real money. It also needs to run fast so users don't spend their time frustrated with game freezing. Compatibility, as with almost all online products, is key because of the large target market. I am most acquainted with Java programming, but I don't want to do it in Java if there is something much better. I am assuming I will have to utilize a variety of different languages in order for everything to come together. If someone could point out the main structure of everything so I could get a good start that would be great! 1) Language choice for simple secure online multiplayer games? 2) Perhaps use a database like MySQL, stored on a secure server for the trivia questions? 3) Free educational resources and even simpler projects to practice? Any ideas or suggestions would be helpful...Thanks!

    Read the article

  • Unicode license

    - by Eric Grange
    Unicode Terms of use (http://www.unicode.org/copyright.html) state that any software that uses their data files (or a modification of it) should carry the Unicode license references. It seems to me that most Unicode libraries have functions to check if a character is a digit, a letter, a symbol, etc. ans so will contain a modification of the Unicode Data Files (usually in the form of tables). Does that mean the license applies and all applications that use such Unicode libraries should carry the license? I've checked around, and it appears very few Unicode software do carry the license, though arguable most of those that didn't carry the license were from companies that were members of the Unicode consortium (do they get license exemption?). Some (f.i. Mozilla) are only "Liaison Members", and while their software do not carry the license (AFAICT), they do obviously rely on data derived from those data files. Is Mozilla in breach of the license? Should we carry the license in all apps that include any form of advanced Unicode support? (ie. are bound to rely on the Unicode data files) Or is there some form of broad exemption? (since very very few software out there carries the license)

    Read the article

  • Adjusting the rate of movement of different objects on the same timer

    - by theUg
    I have a series of objects moving along the straight lines. I want to implement slight changes of velocity of each of the object. Constraint is existing model of animation. I am new to this, and not sure if it is the best way to accommodate varying speeds, but what do I know? It is a Java application that repaints the panel every time the timer expires. Timer is set via swing.Timer object that is set by timer delay constant. Every time the game is stepped objects’ coordinates advanced by an increment constant. Most of the objects are of the same class. Is there fairly easy way to refactor existing system to allow changing velocity for an individual object? Is there some obvious common solution I am not aware about? Idea I am having right now is to set timer delay fairly small, and only move objects every so many cycles of animation so that the apparent speed can be adjusted by varying how often they get moved. But that seems fairly involved, and I do not think it is the most elegant solution in terms of performance what with repainting the whole frame every 3-5 milliseconds. Can it be done by advancing the objects so many (varying) times during the certain interval (let’s say 35ms for something like 28fps), and use repaint() method to redraw just individual object? Do I need to mess with pausing animation for smoothness at higher redraw rates? Is it common practise to check for collision at larger step interval, but draw animation a lot more frequently?

    Read the article

  • LIfebook lh531 inbuilt card reader not working

    - by chandrasekar
    Inbuilt card reader (SD/PRO/SDHC) not working. When I insert the memory card the indicator comes for a milli second and nothing happens. When I do lspci it gives the out put which is pasted below: I use Ubuntu 11.10. Pl help pro-hq@prohq-LIFEBOOK-LH531:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) pro-hq@prohq-LIFEBOOK-LH531:~$

    Read the article

  • Buffer System For Items

    - by Ohmages
    I am going to reference this image of what I want to accomplish in JavaScript. This is the Diablo buffer system. This question may be a bit advanced (or possibly not even allowed). But I was wondering how you might go about implementing this type of system in a JavaScript game. Currently to implement such a system in JavaScript escapes me, and I am turning to SO to get some suggestions, ideas, and hopefully some insight in how I could accomplish this without being to costly on the CPU. Some thoughts of mine for implementing such a system would be to: Create DIVS within a DIV that hold each position of the inventory Go through each item you own in a container and see which DIV it belongs to Make said item images the DIVs image This type of system might possibly work if ALL items were 1x1, but for this example its not going to work out. I am at a complete lost of ideas how to even accomplish this. Although, maybe rendering directly to the canvas and checking mouse cords could work, there would more than likely be A HUGE annoyance when checking if other items are overlapping each other (meaning you cant place the item down, and possibly switching item with the cursor item ). That said, what am I left with? Do I need to makeshift my own hack system with messy code, or is there some source out there (that I don't know about) that has replicated this type of system in their own game. I would be very grateful to get some replies on how you might go about doing this, and will accept answers that can logically explain how you might implement such a system (code is not required). P.S. Id like to use pure JavaScript, and nothing else (even though it might be "reinventing the wheel", I also like to learn).

    Read the article

  • Modular Database Structures

    - by John D
    I have been examining the code base we use in work and I am worried about the size the packages have grown to. The actual code is modular, procedures have been broken down into small functional (and testable) parts. The issue I see is that we have 100 procedures in a single package - almost an entire domain model. I had thought of breaking these packages down - to create sub domains that are centered around the procedure relationships to other objects. Group a bunch of procedures that have 80% of their relationships to three tables etc. The end result would be a lot more packages, but the packages would be smaller and I feel the entire code base would be more readable - when procedures cross between two domain models it is less of a struggle to figure which package it belongs to. The problem I now have is what the actual benefit of all this would really be. I looked at the general advantages of modularity: 1. Re-usability 2. Asynchronous Development 3. Maintainability Yet when I consider our latest development, the procedures within the packages are already reusable. At this advanced stage we rarely require asynchronous development - and when it is required we simply ladder the stories across iterations. So I guess my question is if people know of reasons why you would break down classes rather than just the methods inside of classes? Right now I do believe there is an issue with these mega packages forming but the only benefit I can really pin down to break them down is readability - something that experience gained from working with them would solve.

    Read the article

  • Ubuntu sound volume is 40% lower than in Windows

    - by ncomx
    I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

    Read the article

  • How to help FGLRX detect a device

    - by user113416
    I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

    Read the article

  • Ubuntu 12.04 - default Radeon driver does not work at all

    - by mumble
    I've recently upgraded to 12.04 LTS and I have an ATI Radeon HD5670. I've heard that the open source 'Radeon' driver is used by default. However, it wasn't showing anything for me. What I did was I added the 'nomodeset' option to boot up and install fglrx. But it didn't work well for me as it introduced a lot of problems (freezes/glitches). So I removed/purged fglrx and am planning to use the open source drivers instead. So my question is this: Why is my default Radeon driver not working? Is anyone having a similar issue? I've also tried using the ubuntu-x-swat driver by running the ff commands: sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update But the result was the same as the Radeon driver. Nothing shows up on system boot. Any ideas? Thanks in advance! Update Running lspci -nn | grep VGA gives me the following: 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Redwood [Radeon HD 5670] [1002:68d8]

    Read the article

  • How do I get 1366x768 resolution on 12.04?

    - by Megan
    I am on an HP Envy 14, and the proper resolution that I should be using is 1366x768. This is not an option and I am stuck on 1024x768. I am using Linux 12.04. lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] I've tried to add the resolution as a mode in xorg.conf but that does not work. Please any help would be appreciated. I'm new to Linux and just got my dual boot working but this resolution issue is killing me. Edit1 I just tried using the xrandr command: xrandr --newmode "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync But I get an error: xrandr: Failed to get size of gamma for output default Edit2 lsmod returns the following: Module Size Used by vesafb 13844 1 rfcomm 47604 12 bnep 18281 2 parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 arc4 12529 2 joydev 17693 0 hid_logitech_dj 18594 0 i915 472941 5 uvcvideo 72627 0 usbhid 47199 1 hid_logitech_dj hid 99559 2 hid_logitech_dj,usbhid psmouse 87692 0 iwlwifi 332525 0 mac80211 506816 1 iwlwifi videodev 98259 1 uvcvideo snd_hda_codec_idt 70795 1 mei 41616 0 btusb 18288 2 v4l2_compat_ioctl32 17128 1 videodev hp_accel 25976 0 lis3lv02d 19876 1 hp_accel hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi input_polldev 13896 1 lis3lv02d drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 serio_raw 13211 0 snd_hda_intel 33773 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec bluetooth 180104 23 rfcomm,bnep,btusb cfg80211 205544 2 iwlwifi,mac80211 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec mac_hid 13253 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device wmi 19256 1 hp_wmi video 19596 1 i915 intel_ips 18174 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 I have installed ATI/AMD proprietary FGLRX graphics driver. But there is another one called ATI/AMD proprietary FGLRX graphics driver (post-release updates) which I have trouble installing because it gives me an error and tells me to look at some sort of jockey log.

    Read the article

  • How can I triple boot Xubuntu, Ubuntu and Windows?

    - by ag.restringere
    Triple Booting Xubuntu, Ubuntu and Windows I'm an avid Xubuntu (Ubuntu + XFCE) user but I also dual boot with Windows XP. I originally created 3 partitions and wanted to use the empty one as a storage volume but now I want to install Ubuntu 12.04 LTS (the one with Unity) to do advanced testing and packaging. Ideally I would love to keep these two totally separate as I had problems in the past with conflicts between Unity and XFCE. This way I could wipe the Ubuntu w/ Unity installation if there are problems and really mess around with it. My disk looks like this: /dev/sda1 -- Windows XP /dev/sda2 -- Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Device Boot Start End Blocks Id System /dev/sda1 * 63 78139454 39069696 7 HPFS/NTFS/exFAT /dev/sda2 78141440 156280831 39069696 83 Linux /dev/sda3 156282878 386533375 115125249 5 Extended /dev/sda4 386533376 390721535 2094080 82 Linux swap / Solaris /dev/sda5 156282880 386533375 115125248 83 Linux Keep each in it's own partition and totally separate and be able to select from each of the three systems from the GRUB boot menu... sda1 --- [Windows XP] sda2 --- [Ubuntu 12.04] "Unity" sda3(4,5) -- [Xubuntu 12.02] "Primary XFCE" What is the safest and easiest way to do this without messing my system up and requiring invasive activity?

    Read the article

  • canvas tile grid, hover effects, single tilesheet, etc

    - by user121730
    I'm currently in the process of building both the client and server side of an html5, canvas, and WebSocket game. This is what I have thus far for the client: http://jsfiddle.net/dDmTf/7/ Current obstacles The hover effect has no idea what to put back after the mouse leaves. Currently it's just drawing a "void" tile, but I can't figure out how to redraw a single tile without redrawing the whole map. How would I go about storing multiple layers within the map variable? I was considering just using a multi-dimensional array for each layer (similar to what you see as the current array), and just iterating through it, but is that really an efficient way of doing it? Side note The tile sheet being used for the jsfiddle display is only for development. I'll be replacing it as things progress in the engine. I hope you can help! Hopefully you guys can help me, I've been struggling to get through things, since I'm learning how things kind of stuff works as I go. If you guys have any pointers for my JavaScript, feel free. As I'm more or less learning advanced usage as I go, I'm sure I'm doing plenty of things wrong. Note: I will continue to update this post as the engine improves, but updating the jsfiddle link and updating the obstacles list by striking things that have been solved, or adding additions. Thanks!

    Read the article

  • Should I, and how do I incorporate microdata into my asp.net website with 47 pages?

    - by Jason Weber
    I have an asp.net (vb) with 47 pages. The problem is that it's in 10 different languages, although 98% just use English. I have 5 master pages. I've read Google Webmaster Tools, but I'm still confounded. I'm reading about how microdata is the way to go. Does this mean I should put itemtype and itemprop span and div tags in my master pages, or should I do all of my 47 pages (.resx resource files) separately? The main key phrase I want throughout search results is "machine vision". For instance, the first couple sentences on my "about.aspx" page are: <span itemprop="name">USS Vision Inc.</span> (USS) is a privately-owned company with headquarters in <span itemprop="locality">Detroit, Michigan, USA</span>. We design, engineer, produce, and integrate special machine vision error-proofing products and <a href="http://www.ussvision.com/services/" target="_self" itemprop="url">services</a> that create lean factories by improving the quality of manufactured products, and by significantly reducing manufacturing costs through advanced automation. Am I doing this right, or how would I do this if I'm not? Should I use the itemprop="url" or other rich snippets for every link in my website? I mean, do I need to add an itemprop to just about everything, or can I just alter my master pages? Any guidance in this regard to help improve my SEO and SERPS would be greatly appreciated!

    Read the article

  • How to do a 3-tier using PHP [closed]

    - by Ric
    I have a requirement from a client for my PHP Web application to be 3-tier. For example, I would have a web server on Apache in the DMZ, but it should NOT contain any DB connections. It should connect to a Middle server that would host the business objects but be behind the firewall. Then those objects connect to my SQL cluster on another server. I have actually done this using .NET, but I am not sure how to setup my stack using PHP. I suppose I could have my UI front tier call the middle tier using REST based web services if I create my middle tier as a second web server, but this seems overly complex. The main reason for this is advanced security: we can not have any passwords on the DMZ first tier web server. The second reason is scalability - to have multiple server on different tiers that can handle the requests. The Last reason is for deployment - it is easier if I can take one set of servers offline for testing before putting them back in production. Is there a open source project that shows how to do this? The only example I can find is the web server hosting files from a shared drive on another machine (kind of how DotNetNuke pretends to be 3-tier), but that is NOT secure.

    Read the article

  • wrong kernel running after install

    - by ticktockhouse
    I have installed Ubuntu 14.04 from unetbootin. When it reboots after the install, uname -r says: 3.5.0-17-generic ..this means that no modules have loaded for the kernel that is actually installed (3.13.0-32-generic). Does anyone know why this kernel should be installed via the install process? Is it an artifact of using Unetbootin? Booting into the Unetbootin image gives the correct kernel, and thus the modules load. Knowing why is one thing, but I'm not sure how to remedy it now. Because no modules are loaded, I can't connect to the network or connect a USB drive. I've tried update-grub, which seems to find the correct kernel, but doesn't seem to tell the system to boot from it. I've also tried selecting the kernel at boot time using the "Advanced Options for Ubuntu", and the 3.13.x kernel is the only one listed. Selecting this lead to the 3.5.x kernel stubbornly loading.. I'm a fairly accomplished sysadmin, but this one has me flummoxed :) Can anyone help?

    Read the article

  • Why is CS never a topic of conversation of the layman? [closed]

    - by hydroparadise
    Granted, every profession has it's technicalities. If you are an MD, you better know the anatomy of the human body, and if you are astronomer, you better know your calculus. Yet, you don't have to know these more advance topics to know that smoking might give you lung cancer because of carcinogens or the moon revolves around the earth because of gravity (thank you Discovery Channel). There's sort of a common knowledge (at least in more developed countries) of these more advanced topics. With that said, why are things like recursive descent parsing, BNF, or Turing machines hardly ever mentioned outsided 3000 or 4000 level classes in a university setting or between colleagues? Even back in my days before college in my pursuit of knowledge on how computers work, these very important topics (IMHO) never seem to get the light of day. Many different sources and sites go into "What is a processor?" or "What is RAM?", or "What is an OS?". You might get lucky and discover something about programming languages and how they play a role in how applications are created, but nothing about the tools for creating the language itself. To extend this idea, Dennis Ritchie died shortly after Steve Jobs, yet Dennis Ritchie got very little press compared to Steve Jobs. So, the heart of my question: Does the public in general not care to hear about computer science topics that make the technology in their lives work, or does the computer science community not lend itself to the general public to close the knowledge gap? Am I wrong to think the general public has the same thirst for knowledge on how things work as I do? Please consider the question carefully before answering or vote closing please.

    Read the article

  • Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

    - by pst007x
    I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

    Read the article

  • Creating a SQL Azure Database Should be Easier

    - by Ken Cox [MVP]
    Every time I try to create a database + tables + data for Windows Azure SQL I get errors.  One of them is 'Filegroup reference and partitioning scheme' is not supported in this version of SQL Server.' It’s partly due to my poor memory (since I’ve succeeded before) and partly due to the failure of tools that should be helping me. For example, when I want to create a script from an existing database on my local workstation, I use SQL Server Management Studio (currently v 11.0.2100.60).  I go to Tasks > Generate Scripts which brings up the nice Generate and Publish Scripts wizard. When I go into the Advanced button, under Script for Server Version, why don’t I see SQL Azure as an option by now? The tool should be sorting this out for me, right? Maybe this is available in SQL Server Data Tools? I haven’t got into that yet. Just merge the functionality with SSMS, please. Anyway, I pick an older version of SQL for the target and still need to tweak it for Azure. For example, I take out all the “[dbo].” stuff. Why is it put there by the wizard? I also have to get rid of "ON [PRIMARY]"  to deal with the error I noted at the top. Yes, there’s information on what a table needs to look like in SQL Azure but the tools should know this so I don’t have to mess with it.

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >