Search Results

Search found 2229 results on 90 pages for 'conditions'.

Page 88/90 | < Previous Page | 84 85 86 87 88 89 90  | Next Page >

• Stop duplicate icmp echo replies when bridging to a dummy interface?

  - by mbrownnyc

  I recently configured a bridge br0 with members as eth0 (real if) and dummy0 (dummy.ko if). When I ping this machine, I receive duplicate replies as: # ping SERVERA PING SERVERA.domain.local (192.168.100.115) 56(84) bytes of data. 64 bytes from SERVERA.domain.local (192.168.100.115): icmp_seq=1 ttl=62 time=113 ms 64 bytes from SERVERA.domain.local (192.168.100.115): icmp_seq=1 ttl=62 time=114 ms (DUP!) 64 bytes from SERVERA.domain.local (192.168.100.115): icmp_seq=2 ttl=62 time=113 ms 64 bytes from SERVERA.domain.local (192.168.100.115): icmp_seq=2 ttl=62 time=113 ms (DUP!) Using tcpdump on SERVERA, I was able to see icmp echo replies being sent from eth0 and br0 itself as follows (oddly two echo request packets arrive "from" my Windows box myhost): 23:19:05.324192 IP myhost.domain.local > SERVERA.domain.local: ICMP echo request, id 512, seq 43781, length 40 23:19:05.324212 IP SERVERA.domain.local > myhost.domain.local: ICMP echo reply, id 512, seq 43781, length 40 23:19:05.324217 IP myhost.domain.local > SERVERA.domain.local: ICMP echo request, id 512, seq 43781, length 40 23:19:05.324221 IP SERVERA.domain.local > myhost.domain.local: ICMP echo reply, id 512, seq 43781, length 40 23:19:05.324264 IP SERVERA.domain.local > myhost.domain.local: ICMP echo reply, id 512, seq 43781, length 40 23:19:05.324272 IP SERVERA.domain.local > myhost.domain.local: ICMP echo reply, id 512, seq 43781, length 40 It's worth noting, testing reveals that hosts on the same physical switch do not see DUP icmp echo responses (a host on the same VLAN on another switch does see a dup icmp echo response). I've read that this could be due to the ARP table of a switch, but I can't find any info directly related to bridges, just bonds. I have a feeling my problem lay in the stack on linux, not the switch, but am opened to any suggestions. The system is running centos6/el6 kernel 2.6.32-71.29.1.el6.i686. How do I stop ICMP echo replies from being sent in duplicate when dealing with a bridge interface/bridged interfaces? Thanks, Matt [edit] Quick note: It was recommended in #linux to: [08:53] == mbrownnyc [gateway/web/freenode/] has joined ##linux [08:57] <lkeijser> mbrownnyc: what happens if you set arp_ignore to 1 for the dummy interface? [08:59] <lkeijser> also set arp_announce to 2 for that interface [09:24] <mbrownnyc> lkeijser: I set arp_annouce to 2, arp_ignore to 2 in /etc/sysctl.conf and rebooted the machine... verifying that the bits are set after boot... the problem is still present I did this and came up empty. Same dup problem. I will be moving away from including the dummy interface in the bridge as: [09:31] == mbrownnyc [gateway/web/freenode/] has joined #Netfilter [09:31] <mbrownnyc> Hello all... I'm wondering, is it correct that even with an interface in PROMISC that the kernel will drop /some/ packets before they reach applications? [09:31] <whaffle> What would you make think so? [09:32] <mbrownnyc> I ask because I am receiving ICMP echo replies after configuring a bridge with a dummy interface in order for ipt_netflow to see all packets, only as reported in it's documentation: http://ipt-netflow.git.sourceforge.net/git/gitweb.cgi?p=ipt-netflow/ipt-netflow;a=blob;f=README.promisc [09:32] <mbrownnyc> but I do not know if PROMISC will do the same job [09:33] <mbrownnyc> I was referred here from #linux. any assistance is appreciated [09:33] <whaffle> The following conditions need to be met: PROMISC is enabled (bridges and applications like tcpdump will do this automatically, otherwise they won't function). [09:34] <whaffle> If an interface is part of a bridge, then all packets that enter the bridge should already be visible in the raw table. [09:35] <mbrownnyc> thanks whaffle PROMISC must be set manually for ipt_netflow to function, but [09:36] <whaffle> promisc does not need to be set manually, because the bridge will do it for you. [09:36] <whaffle> When you do not have a bridge, you can easily create one, thereby rendering any kernel patches moot. [09:36] <mbrownnyc> whaffle: I speak without the bridge [09:36] <whaffle> It is perfectly valid to have a "half-bridge" with only a single interface in it. [09:36] <mbrownnyc> whaffle: I am unfamiliar with the raw table, does this mean that PROMISC allows the raw table to be populated with packets the same as if the interface was part of a bridge? [09:37] <whaffle> Promisc mode will cause packets with {a dst MAC address that does not equal the interface's MAC address} to be delivered from the NIC into the kernel nevertheless. [09:37] <mbrownnyc> whaffle: I suppose I mean to clearly ask: what benefit would creating a bridge have over setting an interface PROMISC? [09:38] <mbrownnyc> whaffle: from your last answer I feel that the answer to my question is "none," is this correct? [09:39] <whaffle> Furthermore, the linux kernel itself has a check for {packets with a non-local MAC address}, so that packets that will not enter a bridge will be discarded as well, even in the face of PROMISC. [09:46] <mbrownnyc> whaffle: so, this last bit of information is quite clearly why I would need and want a bridge in my situation [09:46] <mbrownnyc> okay, the ICMP echo reply duplicate issue is likely out of the realm of this channel, but I sincerely appreciate the info on the kernels inner-workings [09:52] <whaffle> mbrownnyc: either the kernel patch, or a bridge with an interface. Since the latter is quicker, yes [09:54] <mbrownnyc> thanks whaffle [edit2] After removing the bridge, and removing the dummy kernel module, I only had a single interface chilling out, lonely. I still received duplicate icmp echo replies... in fact I received a random amount: http://pastebin.com/2LNs0GM8 The same thing doesn't happen on a few other hosts on the same switch, so it has to do with the linux box itself. I'll likely end up rebuilding it next week. Then... you know... this same thing will occur again. [edit3] Guess what? I rebuilt the box, and I'm still receiving duplicate ICMP echo replies. Must be the network infrastructure, although the ARP tables do not contain multiple entries. [edit4] How ridiculous. The machine was a network probe, so I was (ingress and egress) mirroring an uplink port to a node that was the NIC. So, the flow (must have) gone like this: ICMP echo request comes in through the mirrored uplink port. (the real) ICMP echo request is received by the NIC (the mirrored) ICMP echo request is received by the NIC ICMP echo reply is sent for both. I'm ashamed of myself, but now I know. It was suggested on #networking to either isolate the mirrored traffic to an interface that does not have IP enabled, or tag the mirrored packets with dot1q.

  Read the article

• Subset sum problem

  - by MadBoy

  I'm having a problem with counting which is continuation of this question. I am not really a math person so it's really hard for me to figure out this subset sum problem which was suggested as resolution. I'm having 4 ArrayList in which I hold data: alId, alTransaction, alNumber, alPrice Type | Transaction | Number | Price 8 | Buy | 95.00000000 | 305.00000000 8 | Buy | 126.00000000 | 305.00000000 8 | Buy | 93.00000000 | 306.00000000 8 | Transfer out | 221.00000000 | 305.00000000 8 | Transfer in | 221.00000000 | 305.00000000 8 | Sell | 93.00000000 | 360.00000000 8 | Sell | 95.00000000 | 360.00000000 8 | Sell | 126.00000000 | 360.00000000 8 | Buy | 276.00000000 | 380.00000000 In the end I'm trying to get what's left for customer and what's left I put into 3 array lists: alNew (corresponds to alNumber), alNewPoIle (corresponds to alPrice), and alNewCo (corrseponds to alID) ArrayList alNew = new ArrayList(); ArrayList alNewPoIle = new ArrayList(); ArrayList alNewCo = new ArrayList(); for (int i = 0; i < alTransaction.Count; i++) { string tempAkcjeCzynnosc = (string) alTransaction[i]; string tempAkcjeInId = (string) alID[i]; decimal varAkcjeCena = (decimal) alPrice[i]; decimal varAkcjeIlosc = (decimal) alNumber[i]; int index; switch (tempAkcjeCzynnosc) { case "Transfer out": case "Sell": index = alNew.IndexOf(varAkcjeIlosc); if (index != -1) { alNew.RemoveAt(index); alNewPoIle.RemoveAt(index); alNewCo.RemoveAt(index); } else { ArrayList alTemp = new ArrayList(); decimal varAkcjeSuma = 0; for (int j = 0; j < alNew.Count; j ++) { string akcjeInId = (string) alNewCo[j]; decimal akcjeCena = (decimal) alNewPoIle[j]; decimal akcjeIlosc = (decimal) alNew[j]; if (tempAkcjeInId == akcjeInId && akcjeCena == varAkcjeCena) { alTemp.Add(j); varAkcjeSuma = varAkcjeSuma + akcjeIlosc; } } if (varAkcjeSuma == varAkcjeIlosc) { for (int j = alTemp.Count -1 ; j >=0 ; j --) { int tempIndex = (int) alTemp[j]; alNew.RemoveAt(tempIndex); alNewPoIle.RemoveAt(tempIndex); alNewCo.RemoveAt(tempIndex); } } } break; case "Transfer In": case "Buy": alNew.Add(varAkcjeIlosc); alNewPoIle.Add(varAkcjeCena); alNewCo.Add(tempAkcjeInId); break; } } Basically I'm adding and removing things from Array depending on Transaction Type, Transaction ID and Numbers. I'm adding numbers to ArrayList like 156, 340 (when it is TransferIn or Buy) etc and then i remove them doing it like 156, 340 (when it's TransferOut, Sell). My solution works for that without a problem. The problem I have is that for some old data employees were entering sum's like 1500 instead of 500+400+100+500. How would I change it so that when there's Sell/TransferOut or Buy/Transfer In and there's no match inside ArrayList it should try to add multiple items from thatArrayList and find elements that combine into aggregate. Inside my code I tried to resolve that problem with simple summing everything when there's no match (index == 1) if (index != -1) { alNew.RemoveAt(index); alNewPoIle.RemoveAt(index); alNewCo.RemoveAt(index); } else { ArrayList alTemp = new ArrayList(); decimal varAkcjeSuma = 0; for (int j = 0; j < alNew.Count; j ++) { string akcjeInId = (string) alNewCo[j]; decimal akcjeCena = (decimal) alNewPoIle[j]; decimal akcjeIlosc = (decimal) alNew[j]; if (tempAkcjeInId == akcjeInId && akcjeCena == varAkcjeCena) { alTemp.Add(j); varAkcjeSuma = varAkcjeSuma + akcjeIlosc; } } if (varAkcjeSuma == varAkcjeIlosc) { for (int j = alTemp.Count -1 ; j >=0 ; j --) { int tempIndex = (int) alTemp[j]; alNew.RemoveAt(tempIndex); alNewPoIle.RemoveAt(tempIndex); alNewCo.RemoveAt(tempIndex); } } But it only works if certain conditions are met, and fails for the rest.

  Read the article

• cannot access localhost using ip

  - by Robert

  I have done a small web development project using eclipse. It runs well when I try running it on browser with url localhost:8080/myproject/home.html. But if I want to access it on another machine (laptop, mobile, etc. using the same wifi) it is not possible; it is not able to connect. After Googling for a while found out that I have to use the IP address instead of 'localhost'. So I tried 10.0.0.4:8080/myproject/home.html, but still does not work. In fact i am unable to open that url on the same machine (where localhost:8080/myproject/home.html works fine). I also added a new Inbound rule in control panel firewall settings, allowing access to all ports for protocol TCP. Still have problem in running application with the url 10.0.0.4:8080/myproject/home.html (both on same machine as well as laptop and mobile). FYI i am using Eclipse Indigo, Apache tomcat 6.0 and server.xml file contents is as below: <?xml version="1.0" encoding="UTF-8"?> <!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --><!-- Note: A "Server" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/server.html --><Server port="8005" shutdown="SHUTDOWN"> <!--APR library loader. Documentation at /docs/apr.html --> <Listener SSLEngine="on" className="org.apache.catalina.core.AprLifecycleListener"/> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener"/> <!-- Prevent memory leaks due to use of particular java/javax APIs--> <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener"/> <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html --> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/> <!-- Global JNDI resources Documentation at /docs/jndi-resources-howto.html --> <GlobalNamingResources> <!-- Editable user database that can also be used by UserDatabaseRealm to authenticate users --> <Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/> </GlobalNamingResources> <!-- A "Service" is a collection of one or more "Connectors" that share a single "Container" Note: A "Service" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/service.html --> <Service name="Catalina"> <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8080" protocol="HTTP/1.1" address="10.0.0.4" connectionTimeout="20000" redirectPort="8443" /> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine defaultHost="localhost" name="Catalina"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> --> <!-- The request dumper valve dumps useful debugging information about the request and response data received and sent by Tomcat. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve"/> --> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <!-- Define the default virtual host Note: XML Schema validation will not work with Xerces 2.2. --> <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/> --> <Context docBase="myproject" path="/myproject" reloadable="true" source="org.eclipse.jst.jee.server:myproject"/></Host> </Engine> </Service> </Server>

  Read the article

• xs:choice unbounded list

  - by Matt

  I want to define an XSD schema for an XML document, example below: <?xml version="1.0" encoding="utf-8"?> <view xmlns="http://localhost/model_data" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://localhost/model_data XMLSchemaView.xsd" path="wibble" id="wibble"> <text name="PageTitle">Homepage</text> <text name="Keywords">home foo bar</text> <image name="MainImage"> <description>lolem ipsum</description> <title>i haz it</title> <url>/images/main-image.jpg</url> <type>image/jpeg</type> <alt>alt text for image</alt> <width>400</width> <height>300</height> </image> <link name="TermsAndConditionsLink"> <url>/tnc.html</url> <title>Terms and Conditions</title> <target>_blank</target> </link> </view> There's a view root element and then an unknown number of field elements (of various types). I'm using the following XSD schema: <?xml version="1.0" encoding="utf-8"?> <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://localhost/model_data" targetNamespace="http://localhost/model_data" id="XMLSchema1"> <xs:element name="text" type="text_field"/> <xs:element name="view" type="model_data"/> <xs:complexType name="model_data"> <xs:choice maxOccurs="unbounded"> <xs:element name="text" type="text_field"/> <xs:element name="image" type="image_field"/> <xs:element name="link" type="link_field"/> </xs:choice> <xs:attribute name="path" type="xs:string"/> <xs:attribute name="id" type="xs:string"/> </xs:complexType> <xs:complexType name="image_field"> <xs:all> <xs:element name="description" type="xs:string"/> <xs:element name="title" type="xs:string"/> <xs:element name="type" type="xs:string"/> <xs:element name="url" type="xs:string"/> <xs:element name="alt" type="xs:string"/> <xs:element name="height" type="xs:int"/> <xs:element name="width" type="xs:int"/> </xs:all> <xs:attribute name="name" type="xs:string"/> </xs:complexType> <xs:complexType name="text_field"> <xs:simpleContent> <xs:extension base="xs:string"> <xs:attribute name="name" type="xs:string"/> </xs:extension> </xs:simpleContent> </xs:complexType> <xs:complexType name="link_field"> <xs:all> <xs:element name="target" type="xs:string"/> <xs:element name="title" type="xs:string"/> <xs:element name="url" type="xs:string"/> </xs:all> <xs:attribute name="name" type="xs:string"/> </xs:complexType> </xs:schema> This looks like it should work to me, but it doesn't and I always get the following error: Element <text> is not allowed under element <view>. Reason: The following elements are expected at this location (see below) <text> <image> <link> Error location: view / text Details cvc-model-group: Element <text> unexpected by type 'model_data' of element <view>. cvc-elt.5.2.1: The element <view> is not valid with respect to the actual type definition 'model_data'. I've never really used XSD schemas before, so I'd really appreciate it if someone could point out where I'm going wrong.

  Read the article

• JavaScript snippet that populates the table

  - by kayn

  I would like to write a JavaScript snippet that populates the table based on the selection, and not create several details panes and toggle their visibility. I tried implement this using the following code but its not working as desired,firstly,it only works with internet explorer under certain conditions and it just toggles visibility of detail panes;Below is my code; <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <HTML> <HEAD> </HEAD> <BODY onLoad="tblTB_0.style.display='';tblTB_1.style.display='none'; tblTB_2.style.display='none'; tblTB_3.style.display='none'"> <center> <table> <tr> <td> <H1> <align="left"> Candi Colledge of Computing <br/>Course Page </H1> </td> </tr> </table> </center> <hr> </br> <H2><P STYLE="color: blue">Honours Courses.</H2> <left> <p><a href="" onclick="tblTB_1.style.display=''; tblTB_2.style.display='none'; tblTB_3.style.display='none'"> Concurrent Programming</a> <br/> <a href="" onclick="tblTB_1.style.display='none';tblTB_2.style.display=''; tblTB_3.style.display='none'">Simulation of Networks</a><br/> <a href="" onclick="tblTB_1.style.display='none';tblTB_2.style.display='none'; tblTB_3.style.display=''">Advanced Computer Science Topics</a></p> <br> <table style="table-layout: fixed"; border=1> <colgroup> <col width="100px"><col width="150px"><col width="150px"> </colgroup> <tbody id="tblTB_0"> <tr> <td>Course Code</td> <td>Lecturer</td> <td>Hours/Week</td> <td>Credits</td> </tr> </tbody> <tbody id="tblTB_1"> <tr> <td>RW 714</td> <td>Dr. kate</td> <td>2 hrs</td> <td>15</td </tr> </tbody> <tbody id="tblTB_2"> <tr> <td>RW 742</td> <td>Prof. Broz</td> <td>4 hrs</td> <td>10</td> </tr> </tbody> <tbody id="tblTB_3"> <tr> <td>RW 716</td> <td>Consultant</td> <td>3 hrs</td> <td>12</td> </tr> </tbody> </table> </left> <br> </BODY> </HTML>

  Read the article

• Android SQLiteConstraintException: error code 19: constraint failed

  - by Tom D

  I've seen other questions about this exception, but all of them seem to be resolved with the solution that a row with the primary key specified already exists. This doesn't seem to be the case for me. I have tried replacing all single quotes in my strings with double quotes, but the same problem occurs. I'm trying to insert a row into the Settings table of the SQLite database I've created by doing the following: db.execSQL("DROP TABLE IF EXISTS "+Settings.SETTINGS_TABLE_NAME + ";"); db.execSQL(CREATE_MEDIA_TABLE); db.execSQL(CREATE_SETTINGS_TABLE); Cursor c = getAllSettings(); //If there isn't already a settings row, create a row full of defaults if(c.getCount()==0){ ContentValues cv = new ContentValues(); cv.put(Settings.SETTING_UNIQUE_ID, "'"+Settings.uniqueID+"'"); cv.put(Settings.SETTING_DEVICE_ID, Settings.SETTING_DEVICE_ID_DEFAULT); cv.put(Settings.SETTING_CONNECTION_PREFERENCE, Settings.SETTING_CONNECTION_PREFERENCE_DEFAULT); cv.put(Settings.SETTING_AD_HOC_ENABLED, Settings.SETTING_AD_HOC_ENABLED_DEFAULT); cv.put(Settings.SETTING_SERVER_ADDRESS, Settings.SETTING_SERVER_ADDRESS_DEFAULT); cv.put(Settings.SETTING_RECORDING_MODE, Settings.SETTING_RECORDING_MODE_DEFAULT); cv.put(Settings.SETTING_PREVIEW_ENABLED, Settings.SETTING_PREVIEW_ENABLED_DEFAULT); cv.put(Settings.SETTING_PICTURE_RESOLUTION_X, Settings.SETTING_PICTURE_RESOLUTION_X_DEFAULT); cv.put(Settings.SETTING_PICTURE_RESOLUTION_Y, Settings.SETTING_PICTURE_RESOLUTION_Y_DEFAULT); cv.put(Settings.SETTING_VIDEO_RESOLUTION_X, Settings.SETTING_VIDEO_RESOLUTION_X_DEFAULT); cv.put(Settings.SETTING_VIDEO_RESOLUTION_Y, Settings.SETTING_VIDEO_RESOLUTION_Y_DEFAULT); cv.put(Settings.SETTING_VIDEO_FPS, Settings.SETTING_VIDEO_FPS_DEFAULT); cv.put(Settings.SETTING_AUDIO_BITRATE_KBPS, Settings.SETTING_AUDIO_BITRATE_KBPS_DEFAULT); cv.put(Settings.SETTING_STORE_TO_SD, Settings.SETTING_STORE_TO_SD_DEFAULT); cv.put(Settings.SETTING_STORAGE_LIMIT_MB, Settings.SETTING_STORAGE_LIMIT_MB_DEFAULT); this.db.insert(Settings.SETTINGS_TABLE_NAME, null, cv); } The CREATE_SETTINGS_TABLE string is defined as the following: private static String CREATE_SETTINGS_TABLE = "CREATE TABLE IF NOT EXISTS " + Settings.SETTINGS_TABLE_NAME + "(" + Settings.SETTING_UNIQUE_ID + " TEXT NOT NULL PRIMARY KEY, " + Settings.SETTING_DEVICE_ID + " TEXT NOT NULL , " + Settings.SETTING_CONNECTION_PREFERENCE + " TEXT NOT NULL CHECK("+Settings.SETTING_CONNECTION_PREFERENCE+" IN("+Settings.SETTING_CONNECTION_PREFERENCE_ALLOWED+")), " + Settings.SETTING_AD_HOC_ENABLED + " TEXT NOT NULL CHECK("+Settings.SETTING_AD_HOC_ENABLED+" IN("+Settings.SETTING_AD_HOC_ENABLED_ALLOWED+")), " + Settings.SETTING_SERVER_ADDRESS + " TEXT NOT NULL, " + Settings.SETTING_RECORDING_MODE + " TEXT NOT NULL CHECK("+Settings.SETTING_RECORDING_MODE+" IN("+Settings.SETTING_RECORDING_MODE_ALLOWED+")), " + Settings.SETTING_PREVIEW_ENABLED + " TEXT NOT NULL CHECK("+Settings.SETTING_PREVIEW_ENABLED+" IN("+Settings.SETTING_PREVIEW_ENABLED_ALLOWED+")), " + Settings.SETTING_PICTURE_RESOLUTION_X + " TEXT NOT NULL, " + Settings.SETTING_PICTURE_RESOLUTION_Y + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_RESOLUTION_X + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_RESOLUTION_Y + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_FPS + " TEXT NOT NULL, " + Settings.SETTING_AUDIO_BITRATE_KBPS + " TEXT NOT NULL, " + Settings.SETTING_STORE_TO_SD + " TEXT NOT NULL CHECK("+Settings.SETTING_STORE_TO_SD+" IN("+Settings.SETTING_STORE_TO_SD_ALLOWED+")), " + Settings.SETTING_STORAGE_LIMIT_MB + " TEXT NOT NULL )"; However, when I execute my insert, I always get: 03-19 19:37:36.974: ERROR/Database(386): Error inserting server_address='0.0.0.0' storage_limit='-1' connection='none' preview_enabled='0' sd_enabled='1' video_fps='15' audio_bitrate='96' device_id='-1' recording_mode='none' picture_resolution_x='-1' picture_resolution_y='-1' unique_id='000000000000000' adhoc_enable='0' video_resolution_x='320' video_resolution_y='240' 03-19 19:45:34.284: ERROR/Database(446): android.database.sqlite.SQLiteConstraintException: error code 19: constraint failed It seems as if all the columns in my insert are not null. The row's primary key HAS to be unique, because it's the only row in the table. Therefore, the only thing I can think of is my CHECK conditions aren't true. Here are the predefined strings I'm using: public static final String SETTING_UNIQUE_ID = "unique_id"; public static final String SETTING_DEVICE_ID = "device_id"; public static final String SETTING_DEVICE_ID_DEFAULT = "'-1'"; public static final String SETTING_CONNECTION_PREFERENCE = "connection"; public static final String SETTING_CONNECTION_PREFERENCE_3G = "'3g'"; public static final String SETTING_CONNECTION_PREFERENCE_WIFI = "'wifi'"; public static final String SETTING_CONNECTION_PREFERENCE_NONE = "'none'"; public static final String SETTING_CONNECTION_PREFERENCE_ALLOWED = SETTING_CONNECTION_PREFERENCE_3G+","+SETTING_CONNECTION_PREFERENCE_WIFI+","+SETTING_CONNECTION_PREFERENCE_NONE; public static final String SETTING_CONNECTION_PREFERENCE_DEFAULT = SETTING_CONNECTION_PREFERENCE_NONE; public static final String SETTING_AD_HOC_ENABLED = "adhoc_enable"; public static final String SETTING_AD_HOC_ENABLED_ALLOWED = TRUE+","+FALSE; public static final String SETTING_AD_HOC_ENABLED_DEFAULT = FALSE; public static final String SETTING_SERVER_ADDRESS = "server_address"; public static final String SETTING_SERVER_ADDRESS_DEFAULT = "'0.0.0.0'"; public static final String SETTING_RECORDING_MODE = "recording_mode"; public static final String SETTING_RECORDING_MODE_VIDEO = "'video'"; public static final String SETTING_RECORDING_MODE_AUDIO = "'audio'"; public static final String SETTING_RECORDING_MODE_PICTURE = "'picture'"; public static final String SETTING_RECORDING_MODE_NONE = "'none'"; public static final String SETTING_RECORDING_MODE_ALLOWED = SETTING_RECORDING_MODE_VIDEO+","+SETTING_RECORDING_MODE_AUDIO+","+SETTING_RECORDING_MODE_PICTURE+","+SETTING_RECORDING_MODE_NONE; public static final String SETTING_RECORDING_MODE_DEFAULT = SETTING_RECORDING_MODE_NONE; public static final String SETTING_PREVIEW_ENABLED = "preview_enabled"; public static final String SETTING_PREVIEW_ENABLED_ALLOWED = TRUE+","+FALSE; public static final String SETTING_PREVIEW_ENABLED_DEFAULT = FALSE; public static final String SETTING_PICTURE_RESOLUTION_X = "picture_resolution_x"; public static final String SETTING_PICTURE_RESOLUTION_X_DEFAULT = "'-1'"; public static final String SETTING_PICTURE_RESOLUTION_Y = "picture_resolution_y"; public static final String SETTING_PICTURE_RESOLUTION_Y_DEFAULT = "'-1'"; public static final String SETTING_VIDEO_RESOLUTION_X = "video_resolution_x"; public static final String SETTING_VIDEO_RESOLUTION_X_DEFAULT = "'320'"; public static final String SETTING_VIDEO_RESOLUTION_Y = "video_resolution_y"; public static final String SETTING_VIDEO_RESOLUTION_Y_DEFAULT = "'240'"; public static final String SETTING_VIDEO_FPS = "video_fps"; public static final String SETTING_VIDEO_FPS_DEFAULT = "'15'"; public static final String SETTING_AUDIO_BITRATE_KBPS = "audio_bitrate"; public static final String SETTING_AUDIO_BITRATE_KBPS_DEFAULT = "'96'"; public static final String SETTING_STORE_TO_SD = "sd_enabled"; public static final String SETTING_STORE_TO_SD_ALLOWED = TRUE+","+FALSE; public static final String SETTING_STORE_TO_SD_DEFAULT = TRUE; public static final String SETTING_STORAGE_LIMIT_MB = "storage_limit"; public static final String SETTING_STORAGE_LIMIT_MB_DEFAULT = "'-1'"; public static final String SETTING_CLIP_LENGTH_SECONDS = "clip_length"; public static final String SETTING_CLIP_LENGTH_SECONDS_DEFAULT = "'300'"; Does anyone see what could be going on? I'm stumped. Thanks in advance.

  Read the article

• if isset PHP not working?

  - by Ellie

  Okay, Im trying to set a captcha up, However with this code in, it breaks. if(isset($_POST["captcha"])) if($_SESSION["captcha"]==$_POST["captcha"]) When i do it with out it, the page works, but the captcha is letting incorrect submits through. Parse error: syntax error, unexpected '"', expecting T_STRING or T_VARIABLE or T_NUM_STRING in /hermes/waloraweb085/b2027/moo.lutarinet/jointest.php on line 71 <?php $pagetitle = "Home"; $checkrank = 0; include ($_SERVER['DOCUMENT_ROOT'].'/header.inc.php'); ECHO <<<END <br><br> <b><center><i><u>DO NOT</u> USE YOUR NEOPETS PASSWORD OR PIN NUMBER!!!</b></i></center> <p> ?> <?php session_start() ?> <center><P><FORM ACTION="join.pro.php" enctype="multipart/form-data" METHOD=POST> <table width="393" height="188" border="0" cellpadding="0" cellspacing="0"> <td width="150">Username</td> <td width="243"><input type=text name="name" value="" size=32 maxlength=15></td> </tr> <tr> <td>Password</td> <td><input type=password name="pass1" VALUE="" maxlength=15></td> </tr> <tr> <td>Confirm Password</td> <td><input type=password name="pass2" VALUE="" size=32 maxlength=15></td> </tr> <tr> <td>Security Code (4 Diget Number)</td> <td><input type=password name="security" VALUE="" size=32 maxlength=4></td> </tr> <tr> <td>Email Address</td> <td><INPUT TYPE=text NAME="email" VALUE="" SIZE=32 maxlength=100></td> </tr> <tr> <td height="41" colspan="2" valign="middle"><p><p><center> By registering an account here you agree to all of our <A HREF="$baseurl/tos.php">Terms and Conditions</A>. You can also view our <A HREF="$baseurl/privacy.php">Privacy Policy</A>. </center></p></td> </tr> <tr><td align="center">CAPTCHA:<br> (antispam code, 3 black symbols)<br> <table><tr><td><img src="captcha.php" alt="captcha image"></td><td><input type="text" name="captcha" size="3" maxlength="3"></td></tr></table> </td></tr> <td height="27" colspan="2" valign="middle"> <center><input type=submit name=Submit value="Register"></center> </td> </table> </form> <?php if(isset($_POST["captcha"])) if($_SESSION["captcha"]==$_POST["captcha"]) { //CAPTHCA is valid; proceed the message: save to database, send by e-mail ... echo 'CAPTHCA is valid; proceed the message'; } else { echo 'CAPTHCA is not valid; ignore submission'; } ?> <?php END; include ($_SERVER['DOCUMENT_ROOT'].'/footer.inc.php'); ?> captcha.php <?php session_start(); header("Expires: Mon, 26 Jul 1997 05:00:00 GMT"); header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT"); header("Cache-Control: no-store, no-cache, must-revalidate"); header("Cache-Control: post-check=0, pre-check=0", false); header("Pragma: no-cache"); function _generateRandom($length=6) { $_rand_src = array( array(48,57) //digits , array(97,122) //lowercase chars // , array(65,90) //uppercase chars ); srand ((double) microtime() * 1000000); $random_string = ""; for($i=0;$i<$length;$i++){ $i1=rand(0,sizeof($_rand_src)-1); $random_string .= chr(rand($_rand_src[$i1][0],$_rand_src[$i1][1])); } return $random_string; } $im = @imagecreatefromjpeg("http://sketchedneo.com/images/sitedesigns/captcha.jpg"); $rand = _generateRandom(3); $_SESSION['captcha'] = $rand; ImageString($im, 5, 2, 2, $rand[0]." ".$rand[1]." ".$rand[2]." ", ImageColorAllocate ($im, 0, 0, 0)); $rand = _generateRandom(3); ImageString($im, 5, 2, 2, " ".$rand[0]." ".$rand[1]." ".$rand[2], ImageColorAllocate ($im, 255, 0, 0)); Header ('Content-type: image/jpeg'); imagejpeg($im,NULL,100); ImageDestroy($im); ?> Help please anyone? Line 71: if(isset($_POST["captcha"])) Line 72: if($_SESSION["captcha"]==$_POST["captcha"])

  Read the article

• Mobile enabled web apps with ASP.NET MVC 3 and jQuery Mobile

  - by shiju

  In my previous blog posts, I have demonstrated a simple web app using ASP.NET MVC 3 and EF Code First. In this post, I will be focus on making this application for mobile devices. A single web site will be used for both mobile browsers and desktop browsers. If users are accessing the web app from mobile browsers, users will be redirect to mobile specific pages and will get normal pages if users are accessing from desktop browsers. In this demo app, the mobile specific pages are maintained in an ASP.NET MVC Area named Mobile and mobile users will be redirect to MVC Area Mobile. Let’s add a new area named Mobile to the ASP.NET MVC app. For adding Area, right click the ASP.NET MVC project and  select Area from Add option. Our mobile specific pages using jQuery Mobile will be maintained in the Mobile Area. ASP.NET MVC Global filter for redirecting mobile visitors to Mobile area Let’s add an ASP.NET MVC Global filter for redirecting mobile visitors to Mobile area. The below Global filter is taken from the sample app http://aspnetmobilesamples.codeplex.com/ created by the ASP.NET team. The below filer will redirect the Mobile visitors to an ASP.NET MVC Area Mobile. public class RedirectMobileDevicesToMobileAreaAttribute : AuthorizeAttribute     {         protected override bool AuthorizeCore(System.Web.HttpContextBase httpContext)         {             // Only redirect on the first request in a session             if (!httpContext.Session.IsNewSession)                 return true;               // Don't redirect non-mobile browsers             if (!httpContext.Request.Browser.IsMobileDevice)                 return true;               // Don't redirect requests for the Mobile area             if (Regex.IsMatch(httpContext.Request.Url.PathAndQuery, "/Mobile($|/)"))                 return true;               return false;         }           protected override void HandleUnauthorizedRequest(AuthorizationContext filterContext)         {             var redirectionRouteValues = GetRedirectionRouteValues(filterContext.RequestContext);             filterContext.Result = new RedirectToRouteResult(redirectionRouteValues);         }           // Override this method if you want to customize the controller/action/parameters to which         // mobile users would be redirected. This lets you redirect users to the mobile equivalent         // of whatever resource they originally requested.         protected virtual RouteValueDictionary GetRedirectionRouteValues(RequestContext requestContext)         {             return new RouteValueDictionary(new { area = "Mobile", controller = "Home", action = "Index" });         }     } Let’s add the global filer RedirectMobileDevicesToMobileAreaAttribute to the global filter collection in the Application_Start() of Global.asax.cs file   GlobalFilters.Filters.Add(new RedirectMobileDevicesToMobileAreaAttribute(), 1); Now your mobile visitors will be redirect to the Mobile area. But the browser detection logic in the RedirectMobileDevicesToMobileAreaAttribute filter will not be working in some modern browsers and some conditions. But the good news is that ASP.NET’s browser detection feature is extensible and will be greatly working with the open source framework 51Degrees.mobi. 51Degrees.mobi is a Browser Capabilities Provider that will be working with ASP.NET’s Request.Browser and will provide more accurate and detailed information. For more details visit the documentation page at http://51degrees.codeplex.com/documentation. Let’s add a reference to 51Degrees.mobi library using NuGet We can easily add the 51Degrees.mobi from NuGet and this will update the web.config for necessary configuartions. Mobile Web App using jQuery Mobile Framework jQuery Mobile Framework is built on top of jQuery that provides top-of-the-line JavaScript in a unified User Interface that works across the most-used smartphone web browsers and tablet form factors. It provides an easy way to develop user interfaces for mobile web apps. The current version of the framework is jQuery Mobile Alpha 3. We need to include the following files to use jQuery Mobile. The jQuery Mobile CSS file (jquery.mobile-1.0a3.min.css) The jQuery library (jquery-1.5.min.js) The jQuery Mobile library (jquery.mobile-1.0a3.min.js) Let’s add the required jQuery files directly from jQuery CDN . You can download the files and host them on your own server. jQuery Mobile page structure The basic jQuery Mobile page structure is given below <!DOCTYPE html> <html>   <head>   <title>Page Title</title>   <link rel="stylesheet" href="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a1.min.css" />   <script src="http://code.jquery.com/jquery-1.5.min.js"></script>   <script src="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a3.min.js"></script> </head> <body> <div data-role="page">   <div data-role="header">     <h1>Page Title</h1>   </div>   <div data-role="content">     <p>Page content goes here.</p>      </div>   <div data-role="footer">     <h4>Page Footer</h4>   </div> </div> </body> </html> The data- attributes are the new feature of HTML5 so that jQuery Mobile will be working on browsers that supporting HTML 5. You can get a detailed browser support details from http://jquerymobile.com/gbs/ . In the Head section we have included the Core jQuery javascript file and jQuery Mobile Library and the core CSS Library for the UI Element Styling. These jQuery files are minified versions and will improve the performance of page load on Mobile Devices. The jQuery Mobile pages are identified with an element with the data-role="page" attribute inside the <body> tag. <div data-role="page"> </div> Within the "page" container, any valid HTML markup can be used, but for typical pages in jQuery Mobile, the immediate children of a "page" are div element with data-roles of "header", "content", and "footer". <div data-role="page">     <div data-role="header">...</div>     <div data-role="content">...</div>     <div data-role="footer">...</div> </div> The div data-role="content" holds the main content of the HTML page and will be used for making user interaction elements. The div data-role="header" is header part of the page and div data-role="footer" is the footer part of the page. Creating Mobile specific pages in the Mobile Area Let’s create Layout page for our Mobile area <!DOCTYPE html> <html> <head>     <title>@ViewBag.Title</title>     <link rel="stylesheet" href="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a3.min.css" />     <script src="http://code.jquery.com/jquery-1.5.min.js"></script>     <script src="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a3.min.js"></script>     </head>      <body> @RenderBody()    </body> </html> In the Layout page, I have given reference to jQuery Mobile JavaScript files and the CSS file. Let’s add an Index view page Index.chtml @{     ViewBag.Title = "Index"; } <div data-role="page"> <div data-role="header">      <h1>Expense Tracker Mobile</h1> </div> <div data-role="content">   <ul data-role="listview">     <li>@Html.Partial("_LogOnPartial")</li>      <li>@Html.ActionLink("Home", "Index", "Home")</li>      <li>@Html.ActionLink("Category", "Index", "Category")</li>                          <li>@Html.ActionLink("Expense", "Index", "Expense")</li> </ul> </div> <div data-role="footer">           Shiju Varghese | <a href="http://weblogs.asp.net/shijuvarghese">Blog     </a> | <a href="http://twitter.com/shijucv">Twitter</a>   </div> </div>   In the Index page, we have used data-role “listview” for showing our content as List View Let’s create a data entry screen create.cshtml @model MyFinance.Domain.Category @{     ViewBag.Title = "Create Category"; }   <div data-role="page"> <div data-role="header">      <h1>Create Category</h1>             @Html.ActionLink("Home", "Index","Home",null, new { @class = "ui-btn-right" })      </div>       <div data-role="content">     @using (Html.BeginForm("Create","Category",FormMethod.Post))     {       <div data-role="fieldcontain">        @Html.LabelFor(model => model.Name)        @Html.EditorFor(model => model.Name)        <div>           @Html.ValidationMessageFor(m => m.Name)        </div>         </div>         <div data-role="fieldcontain">         @Html.LabelFor(model => model.Description)         @Html.EditorFor(model => model.Description)                   </div>                    <div class="ui-body ui-body-b">         <button type="submit" data-role="button" data-theme="b">Save</button>       </div>     }        </div> </div>   In jQuery Mobile, the form elements should be placed inside the data-role="fieldcontain" The below screen shots show the pages rendered in mobile browser Index Page Create Page Source Code You can download the source code from http://efmvc.codeplex.com   Summary We have created a single  web app for desktop browsers and mobile browsers. If a user access the site from desktop browsers, users will get normal web pages and get mobile specific pages if users access from mobile browsers. If users are accessing the website from mobile devices, we will redirect to a ASP.NET MVC area Mobile. For redirecting to the Mobile area, we have used a Global filer for the redirection logic and used open source framework 51Degrees.mobi for the better support for mobile browser detection. In the Mobile area, we have created the pages using jQuery Mobile and users will get mobile friendly web pages. We can create great mobile web apps using ASP.NET MVC  and jQuery Mobile Framework.

  Read the article

• Beware Sneaky Reads with Unique Indexes

  - by Paul White NZ

  A few days ago, Sandra Mueller (twitter | blog) asked a question using twitter’s #sqlhelp hash tag: “Might SQL Server retrieve (out-of-row) LOB data from a table, even if the column isn’t referenced in the query?” Leaving aside trivial cases (like selecting a computed column that does reference the LOB data), one might be tempted to say that no, SQL Server does not read data you haven’t asked for.  In general, that’s quite correct; however there are cases where SQL Server might sneakily retrieve a LOB column… Example Table Here’s a T-SQL script to create that table and populate it with 1,000 rows: CREATE TABLE dbo.LOBtest ( pk INTEGER IDENTITY NOT NULL, some_value INTEGER NULL, lob_data VARCHAR(MAX) NULL, another_column CHAR(5) NULL, CONSTRAINT [PK dbo.LOBtest pk] PRIMARY KEY CLUSTERED (pk ASC) ); GO DECLARE @Data VARCHAR(MAX); SET @Data = REPLICATE(CONVERT(VARCHAR(MAX), 'x'), 65540);   WITH Numbers (n) AS ( SELECT ROW_NUMBER() OVER (ORDER BY (SELECT 0)) FROM master.sys.columns C1, master.sys.columns C2 ) INSERT LOBtest WITH (TABLOCKX) ( some_value, lob_data ) SELECT TOP (1000) N.n, @Data FROM Numbers N WHERE N.n <= 1000; Test 1: A Simple Update Let’s run a query to subtract one from every value in the some_value column: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; As you might expect, modifying this integer column in 1,000 rows doesn’t take very long, or use many resources.  The STATITICS IO and TIME output shows a total of 9 logical reads, and 25ms elapsed time.  The query plan is also very simple: Looking at the Clustered Index Scan, we can see that SQL Server only retrieves the pk and some_value columns during the scan: The pk column is needed by the Clustered Index Update operator to uniquely identify the row that is being changed.  The some_value column is used by the Compute Scalar to calculate the new value.  (In case you are wondering what the Top operator is for, it is used to enforce SET ROWCOUNT). Test 2: Simple Update with an Index Now let’s create a nonclustered index keyed on the some_value column, with lob_data as an included column: CREATE NONCLUSTERED INDEX [IX dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest (some_value) INCLUDE ( lob_data ) WITH ( FILLFACTOR = 100, MAXDOP = 1, SORT_IN_TEMPDB = ON ); This is not a useful index for our simple update query; imagine that someone else created it for a different purpose.  Let’s run our update query again: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; We find that it now requires 4,014 logical reads and the elapsed query time has increased to around 100ms.  The extra logical reads (4 per row) are an expected consequence of maintaining the nonclustered index. The query plan is very similar to before (click to enlarge): The Clustered Index Update operator picks up the extra work of maintaining the nonclustered index. The new Compute Scalar operators detect whether the value in the some_value column has actually been changed by the update.  SQL Server may be able to skip maintaining the nonclustered index if the value hasn’t changed (see my previous post on non-updating updates for details).  Our simple query does change the value of some_data in every row, so this optimization doesn’t add any value in this specific case. The output list of columns from the Clustered Index Scan hasn’t changed from the one shown previously: SQL Server still just reads the pk and some_data columns.  Cool. Overall then, adding the nonclustered index hasn’t had any startling effects, and the LOB column data still isn’t being read from the table.  Let’s see what happens if we make the nonclustered index unique. Test 3: Simple Update with a Unique Index Here’s the script to create a new unique index, and drop the old one: CREATE UNIQUE NONCLUSTERED INDEX [UQ dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest (some_value) INCLUDE ( lob_data ) WITH ( FILLFACTOR = 100, MAXDOP = 1, SORT_IN_TEMPDB = ON ); GO DROP INDEX [IX dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest; Remember that SQL Server only enforces uniqueness on index keys (the some_data column).  The lob_data column is simply stored at the leaf-level of the non-clustered index.  With that in mind, we might expect this change to make very little difference.  Let’s see: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; Whoa!  Now look at the elapsed time and logical reads: Scan count 1, logical reads 2016, physical reads 0, read-ahead reads 0, lob logical reads 36015, lob physical reads 0, lob read-ahead reads 15992.   CPU time = 172 ms, elapsed time = 16172 ms. Even with all the data and index pages in memory, the query took over 16 seconds to update just 1,000 rows, performing over 52,000 LOB logical reads (nearly 16,000 of those using read-ahead). Why on earth is SQL Server reading LOB data in a query that only updates a single integer column? The Query Plan The query plan for test 3 looks a bit more complex than before: In fact, the bottom level is exactly the same as we saw with the non-unique index.  The top level has heaps of new stuff though, which I’ll come to in a moment. You might be expecting to find that the Clustered Index Scan is now reading the lob_data column (for some reason).  After all, we need to explain where all the LOB logical reads are coming from.  Sadly, when we look at the properties of the Clustered Index Scan, we see exactly the same as before: SQL Server is still only reading the pk and some_value columns – so what’s doing the LOB reads? Updates that Sneakily Read Data We have to go as far as the Clustered Index Update operator before we see LOB data in the output list: [Expr1020] is a bit flag added by an earlier Compute Scalar.  It is set true if the some_value column has not been changed (part of the non-updating updates optimization I mentioned earlier). The Clustered Index Update operator adds two new columns: the lob_data column, and some_value_OLD.  The some_value_OLD column, as the name suggests, is the pre-update value of the some_value column.  At this point, the clustered index has already been updated with the new value, but we haven’t touched the nonclustered index yet. An interesting observation here is that the Clustered Index Update operator can read a column into the data flow as part of its update operation.  SQL Server could have read the LOB data as part of the initial Clustered Index Scan, but that would mean carrying the data through all the operations that occur prior to the Clustered Index Update.  The server knows it will have to go back to the clustered index row to update it, so it delays reading the LOB data until then.  Sneaky! Why the LOB Data Is Needed This is all very interesting (I hope), but why is SQL Server reading the LOB data?  For that matter, why does it need to pass the pre-update value of the some_value column out of the Clustered Index Update? The answer relates to the top row of the query plan for test 3.  I’ll reproduce it here for convenience: Notice that this is a wide (per-index) update plan.  SQL Server used a narrow (per-row) update plan in test 2, where the Clustered Index Update took care of maintaining the nonclustered index too.  I’ll talk more about this difference shortly. The Split/Sort/Collapse combination is an optimization, which aims to make per-index update plans more efficient.  It does this by breaking each update into a delete/insert pair, reordering the operations, removing any redundant operations, and finally applying the net effect of all the changes to the nonclustered index. Imagine we had a unique index which currently holds three rows with the values 1, 2, and 3.  If we run a query that adds 1 to each row value, we would end up with values 2, 3, and 4.  The net effect of all the changes is the same as if we simply deleted the value 1, and added a new value 4. By applying net changes, SQL Server can also avoid false unique-key violations.  If we tried to immediately update the value 1 to a 2, it would conflict with the existing value 2 (which would soon be updated to 3 of course) and the query would fail.  You might argue that SQL Server could avoid the uniqueness violation by starting with the highest value (3) and working down.  That’s fine, but it’s not possible to generalize this logic to work with every possible update query. SQL Server has to use a wide update plan if it sees any risk of false uniqueness violations.  It’s worth noting that the logic SQL Server uses to detect whether these violations are possible has definite limits.  As a result, you will often receive a wide update plan, even when you can see that no violations are possible. Another benefit of this optimization is that it includes a sort on the index key as part of its work.  Processing the index changes in index key order promotes sequential I/O against the nonclustered index. A side-effect of all this is that the net changes might include one or more inserts.  In order to insert a new row in the index, SQL Server obviously needs all the columns – the key column and the included LOB column.  This is the reason SQL Server reads the LOB data as part of the Clustered Index Update. In addition, the some_value_OLD column is required by the Split operator (it turns updates into delete/insert pairs).  In order to generate the correct index key delete operation, it needs the old key value. The irony is that in this case the Split/Sort/Collapse optimization is anything but.  Reading all that LOB data is extremely expensive, so it is sad that the current version of SQL Server has no way to avoid it. Finally, for completeness, I should mention that the Filter operator is there to filter out the non-updating updates. Beating the Set-Based Update with a Cursor One situation where SQL Server can see that false unique-key violations aren’t possible is where it can guarantee that only one row is being updated.  Armed with this knowledge, we can write a cursor (or the WHILE-loop equivalent) that updates one row at a time, and so avoids reading the LOB data: SET NOCOUNT ON; SET STATISTICS XML, IO, TIME OFF;   DECLARE @PK INTEGER, @StartTime DATETIME; SET @StartTime = GETUTCDATE();   DECLARE curUpdate CURSOR LOCAL FORWARD_ONLY KEYSET SCROLL_LOCKS FOR SELECT L.pk FROM LOBtest L ORDER BY L.pk ASC;   OPEN curUpdate;   WHILE (1 = 1) BEGIN FETCH NEXT FROM curUpdate INTO @PK;   IF @@FETCH_STATUS = -1 BREAK; IF @@FETCH_STATUS = -2 CONTINUE;   UPDATE dbo.LOBtest SET some_value = some_value - 1 WHERE CURRENT OF curUpdate; END;   CLOSE curUpdate; DEALLOCATE curUpdate;   SELECT DATEDIFF(MILLISECOND, @StartTime, GETUTCDATE()); That completes the update in 1280 milliseconds (remember test 3 took over 16 seconds!) I used the WHERE CURRENT OF syntax there and a KEYSET cursor, just for the fun of it.  One could just as well use a WHERE clause that specified the primary key value instead. Clustered Indexes A clustered index is the ultimate index with included columns: all non-key columns are included columns in a clustered index.  Let’s re-create the test table and data with an updatable primary key, and without any non-clustered indexes: IF OBJECT_ID(N'dbo.LOBtest', N'U') IS NOT NULL DROP TABLE dbo.LOBtest; GO CREATE TABLE dbo.LOBtest ( pk INTEGER NOT NULL, some_value INTEGER NULL, lob_data VARCHAR(MAX) NULL, another_column CHAR(5) NULL, CONSTRAINT [PK dbo.LOBtest pk] PRIMARY KEY CLUSTERED (pk ASC) ); GO DECLARE @Data VARCHAR(MAX); SET @Data = REPLICATE(CONVERT(VARCHAR(MAX), 'x'), 65540);   WITH Numbers (n) AS ( SELECT ROW_NUMBER() OVER (ORDER BY (SELECT 0)) FROM master.sys.columns C1, master.sys.columns C2 ) INSERT LOBtest WITH (TABLOCKX) ( pk, some_value, lob_data ) SELECT TOP (1000) N.n, N.n, @Data FROM Numbers N WHERE N.n <= 1000; Now here’s a query to modify the cluster keys: UPDATE dbo.LOBtest SET pk = pk + 1; The query plan is: As you can see, the Split/Sort/Collapse optimization is present, and we also gain an Eager Table Spool, for Halloween protection.  In addition, SQL Server now has no choice but to read the LOB data in the Clustered Index Scan: The performance is not great, as you might expect (even though there is no non-clustered index to maintain): Table 'LOBtest'. Scan count 1, logical reads 2011, physical reads 0, read-ahead reads 0, lob logical reads 36015, lob physical reads 0, lob read-ahead reads 15992.   Table 'Worktable'. Scan count 1, logical reads 2040, physical reads 0, read-ahead reads 0, lob logical reads 34000, lob physical reads 0, lob read-ahead reads 8000.   SQL Server Execution Times: CPU time = 483 ms, elapsed time = 17884 ms. Notice how the LOB data is read twice: once from the Clustered Index Scan, and again from the work table in tempdb used by the Eager Spool. If you try the same test with a non-unique clustered index (rather than a primary key), you’ll get a much more efficient plan that just passes the cluster key (including uniqueifier) around (no LOB data or other non-key columns): A unique non-clustered index (on a heap) works well too: Both those queries complete in a few tens of milliseconds, with no LOB reads, and just a few thousand logical reads.  (In fact the heap is rather more efficient). There are lots more fun combinations to try that I don’t have space for here. Final Thoughts The behaviour shown in this post is not limited to LOB data by any means.  If the conditions are met, any unique index that has included columns can produce similar behaviour – something to bear in mind when adding large INCLUDE columns to achieve covering queries, perhaps. Paul White Email: [email protected] Twitter: @PaulWhiteNZ

  Read the article

• eBooks on iPad vs. Kindle: More Debate than Smackdown

  - by andrewbrust

  When the iPad was presented at its San Francisco launch event on January 28th, Steve Jobs spent a significant amount of time explaining how well the device would serve as an eBook reader. He showed the iBooks reader application and iBookstore and laid down the gauntlet before Amazon and its beloved Kindle device. Almost immediately afterwards, criticism came rushing forth that the iPad could never beat the Kindle for book reading. The curious part of that criticism is that virtually no one offering it had actually used the iPad yet. A few weeks later, on April 3rd, the iPad was released for sale in the United States. I bought one on that day and in the few additional weeks that have elapsed, I’ve given quite a workout to most of its capabilities, including its eBook features. I’ve also spent some time with the Kindle, albeit a first-generation model, to see how it actually compares to the iPad. I had some expectations going in, but I came away with conclusions about each device that were more scenario-based than absolute. I present my findings to you here.   Vital Statistics Let’s start with an inventory of each device’s underlying technology. The iPad has a color, backlit LCD screen and an on-screen keyboard. It has a battery which, on a full charge, lasts anywhere from 6-10 hours. The Kindle offers a monochrome, reflective E Ink display, a physical keyboard and a battery that on my first gen loaner unit can go up to a week between charges (Amazon claims the battery on the Kindle 2 can last up to 2 weeks on a single charge). The Kindle connects to Amazon’s Kindle Store using a 3G modem (the technology and network vary depending on the model) that incurs no airtime service charges whatsoever. The iPad units that are on-sale today work over WiFi only. 3G-equipped models will be on sale shortly and will command a $130 premium over their WiFi-only counterparts. 3G service on the iPad, in the U.S. from AT&T, will be fee-based, with a 250MB plan at $14.99 per month and an unlimited plan at $29.99. No contract is required for 3G service. All these tech specs aside, I think a more useful observation is that the iPad is a multi-purpose Internet-connected entertainment device, while the Kindle is a dedicated reading device. The question is whether those differences in design and intended use create a clear-cut winner for reading electronic publications. Let’s take a look at each device, in isolation, now.   Kindle To me, what’s most innovative about the Kindle is its E Ink display. E Ink really looks like ink on a sheet of paper. It requires no backlight, it’s fully visible in direct sunlight and it causes almost none of the eyestrain that LCD-based computer display technology (like that used on the iPad) does. It’s really versatile in an all-around way. Forgive me if this sounds precious, but reading on it is really a joy. In fact, it’s a genuinely relaxing experience. Through the Kindle Store, Amazon allows users to download books (including audio books), magazines, newspapers and blog feeds. Books and magazines can be purchased either on a single-issue basis or as an annual subscription. Books, of course, are purchased singly. Oddly, blogs are not free, but instead carry a monthly subscription fee, typically $1.99. To me this is ludicrous, but I suppose the free 3G service is partially to blame. Books and magazine issues download quickly. Magazine and blog subscriptions cause new issues or posts to be pushed to your device on an automated basis. Available blogs include 9000-odd feeds that Amazon offers on the Kindle Store; unless I missed something, arbitrary RSS feeds are not supported (though there are third party workarounds to this limitation). The shopping experience is integrated well, has an huge selection, and offers certain graphical perks. For example, magazine and newspaper logos are displayed in menus, and book cover thumbnails appear as well. A simple search mechanism is provided and text entry through the physical keyboard is relatively painless. It’s very easy and straightforward to enter the store, find something you like and start reading it quickly. If you know what you’re looking for, it’s even faster. Given Kindle’s high portability, very reliable battery, instant-on capability and highly integrated content acquisition, it makes reading on whim, and in random spurts of downtime, very attractive. The Kindle’s home screen lists all of your publications, and easily lets you select one, then start reading it. Once opened, publications display in crisp, attractive text that is adjustable in size. “Turning” pages is achieved through buttons dedicated to the task. Notes can be recorded, bookmarks can be saved and pages can be saved as clippings. I am not an avid book reader, and yet I found the Kindle made it really fun, convenient and soothing to read. There’s something about the easy access to the material and the simplicity of the display that makes the Kindle seduce you into chilling out and reading page after page. On the other hand, the Kindle has an awkward navigation interface. While menus are displayed clearly on the screen, the method of selecting menu items is tricky: alongside the right-hand edge of the main display is a thin column that acts as a second display. It has a white background, and a scrollable silver cursor that is moved up or down through the use of the device’s scrollwheel. Picking a menu item on the main display involves scrolling the silver cursor to a position parallel to that menu item and pushing the scrollwheel in. This navigation technique creates a disconnect, literally. You don’t really click on a selection so much as you gesture toward it. I got used to this technique quickly, but I didn’t love it. It definitely created a kind of anxiety in me, making me feel the need to speed through menus and get to my destination document quickly. Once there, I could calm down and relax. Books are great on the Kindle. Magazines and newspapers much less so. I found the rendering of photographs, and even illustrations, to be unacceptably crude. For this reason, I expect that reading textbooks on the Kindle may leave students wanting. I found that the original flow and layout of any publication was sacrificed on the Kindle. In effect, browsing a magazine or newspaper was almost impossible. Reading the text of individual articles was enjoyable, but having to read this way made the whole experience much more “a la carte” than cohesive and thematic between articles. I imagine that for academic journals this is ideal, but for consumer publications it imposes a stripped-down, low-fidelity experience that evokes a sense of deprivation. In general, the Kindle is great for reading text. For just about anything else, especially activity that involves exploratory browsing, meandering and short-attention-span reading, it presents a real barrier to entry and adoption. Avid book readers will enjoy the Kindle (if they’re not already). It’s a great device for losing oneself in a book over long sittings. Multitaskers who are more interested in periodicals, be they online or off, will like it much less, as they will find compromise, and even sacrifice, to be palpable.   iPad The iPad is a very different device from the Kindle. While the Kindle is oriented to pages of text, the iPad orbits around applications and their interfaces. Be it the pinch and zoom experience in the browser, the rich media features that augment content on news and weather sites, or the ability to interact with social networking services like Twitter, the iPad is versatile. While it shares a slate-like form factor with the Kindle, it’s effectively an elegant personal computer. One of its many features is the iBook application and integration of the iBookstore. But it’s a multi-purpose device. That turns out to be good and bad, depending on what you’re reading. The iBookstore is great for browsing. It’s color, rich animation-laden user interface make it possible to shop for books, rather than merely search and acquire them. Unfortunately, its selection is rather sparse at the moment. If you’re looking for a New York Times bestseller, or other popular titles, you should be OK. If you want to read something more specialized, it’s much harder. Unlike the awkward navigation interface of the Kindle, the iPad offers a nearly flawless touch-screen interface that seduces the user into tinkering and kibitzing every bit as much as the Kindle lulls you into a deep, concentrated read. It’s a dynamic and interactive device, whereas the Kindle is static and passive. The iBook reader is slick and fun. Use the iPad in landscape mode and you can read the book in 2-up (left/right 2-page) display; use it in portrait mode and you can read one page at a time. Rather than clicking a hardware button to turn pages, you simply drag and wipe from right-to-left to flip the single or right-hand page. The page actually travels through an animated path as it would in a physical book. The intuitiveness of the interface is uncanny. The reader also accommodates saving of bookmarks, searching of the text, and the ability to highlight a word and look it up in a dictionary. Pages display brightly and clearly. They’re easy to read. But the backlight and the glare made me less comfortable than I was with the Kindle. The knowledge that completely different applications (including the Web and email and Twitter) were just a few taps away made me antsy and very tempted to task-switch. The knowledge that battery life is an issue created subtle discomfort. If the Kindle makes you feel like you’re in a library reading room, then the iPad makes you feel, at best, like you’re under fluorescent lights at a Barnes and Noble or Borders store. If you’re lucky, you’d be on a couch or at a reading table in the store, but you might also be standing up, in the aisles. Clearly, I didn’t find this conducive to focused and sustained reading. But that may have more to do with my own tendency to read periodicals far more than books, and my neurotic . And, truth be known, the book reading experience, when not explicitly compared to Kindle’s, was still pleasant. It is also important to point out that Kindle Store-sourced books can be read on the iPad through a Kindle reader application, from Amazon, specific to the device. This offered a less rich experience than the iBooks reader, but it was completely adequate. Despite the Kindle brand of the reader, however, it offered little in terms of simulating the reading experience on its namesake device. When it comes to periodicals, the iPad wins hands down. Magazines, even if merely scanned images of their print editions, read on the iPad in a way that felt similar to reading hard copy. The full color display, touch navigation and even the ability to render advertisements in their full glory makes the iPad a great way to read through any piece of work that is measured in pages, rather than chapters. There are many ways to get magazines and newspapers onto the iPad, including the Zinio reader, and publication-specific applications like the Wall Street Journal’s and Popular Science’s. The New York Times’ free Editors’ Choice application offers a Times Reader-like interface to a subset of the Gray Lady’s daily content. The completely Web-based but iPad-optimized Times Skimmer site (at www.nytimes.com/timesskimmer) works well too. Even conventional Web sites themselves can be read much like magazines, given the iPad’s ability to zoom in on the text and crop out advertisements on the margins. While the Kindle does have an experimental Web browser, it reminded me a lot of early mobile phone browsers, only in a larger size. For text-heavy sites with simple layout, it works fine. For just about anything else, it becomes more trouble than it’s worth. And given the way magazine articles make me think of things I want to look up online, I think that’s a real liability for the Kindle.   Summing Up What I came to realize is that the Kindle isn’t so much a computer or even an Internet device as it is a printer. While it doesn’t use physical paper, it still renders its content a page at a time, just like a laser printer does, and its output appears strikingly similar. You can read the rendered text, but you can’t interact with it in any way. That’s why the navigation requires a separate cursor display area. And because of the page-oriented rendering behavior, turning pages causes a flash on the display and requires a sometimes long pause before the next page is rendered. The good side of this is that once the page is generated, no battery power is required to display it. That makes for great battery life, optimal viewing under most lighting conditions (as long as there is some light) and low-eyestrain text-centric display of content. The Kindle is highly portable, has an excellent selection in its store and is refreshingly distraction-free. All of this is ideal for reading books. And iPad doesn’t offer any of it. What iPad does offer is versatility, variety, richness and luxury. It’s flush with accoutrements even if it’s low on focused, sustained text display. That makes it inferior to the Kindle for book reading. But that also makes it better than the Kindle for almost everything else. As such, and given that its book reading experience is still decent (even if not superior), I think the iPad will give Kindle a run for its money. True book lovers, and people on a budget, will want the Kindle. People with a robust amount of discretionary income may want both devices. Everyone else who is interested in a slate form factor e-reading device, especially if they also wish to have leisure-friendly Internet access, will likely choose the iPad exclusively. One thing is for sure: iPad has reduced Kindle’s market, and may have shifted its mass market potential to a mere niche play. If Amazon is smart, it will improve its iPad-based Kindle reader app significantly. It can then leverage the iPad channel as a significant market for the Kindle Store. After all, selling the eBooks themselves is what Amazon should care most about.

  Read the article

• Is Social Media The Vital Skill You Aren’t Tracking?

  - by HCM-Oracle

  By Mark Bennett - Originally featured in Talent Management Excellence The ever-increasing presence of the workforce on social media presents opportunities as well as risks for organizations. While on the one hand, we read about social media embarrassments happening to organizations, on the other we see that social media activities by workers and candidates can enhance a company’s brand and provide insight into what individuals are, or can become, influencers in the social media sphere. HR can play a key role in helping organizations make the most value out of the activities and presence of workers and candidates, while at the same time also helping to manage the risks that come with the permanence and viral nature of social media. What is Missing from Understanding Our Workforce? “If only HP knew what HP knows, we would be three-times more productive.”  Lew Platt, Former Chairman, President, CEO, Hewlett-Packard  What Lew Platt recognized was that organizations only have a partial understanding of what their workforce is capable of. This lack of understanding impacts the company in several negative ways: 1. A particular skill that the company needs to access in one part of the organization might exist somewhere else, but there is no record that the skill exists, so the need is unfulfilled. 2. As market conditions change rapidly, the company needs to know strategic options, but some options are missed entirely because the company doesn’t know that sufficient capability already exists to enable those options. 3. Employees may miss out on opportunities to demonstrate how their hidden skills could create new value to the company. Why don’t companies have that more complete picture of their workforce capabilities – that is, not know what they know? One very good explanation is that companies put most of their efforts into rating their workforce according to the jobs and roles they are filling today. This is the essence of two important talent management processes: recruiting and performance appraisals.  In recruiting, a set of requirements is put together for a job, either explicitly or indirectly through a job description. During the recruiting process, much of the attention is paid towards whether the candidate has the qualifications, the skills, the experience and the cultural fit to be successful in the role. This makes a lot of sense.  In the performance appraisal process, an employee is measured on how well they performed the functions of their role and in an effort to help the employee do even better next time, they are also measured on proficiency in the competencies that are deemed to be key in doing that job. Again, the logic is impeccable.  But in both these cases, two adages come to mind: 1. What gets measured is what gets managed. 2. You only see what you are looking for. In other words, the fact that the current roles the workforce are performing are the basis for measuring which capabilities the workforce has, makes them the only capabilities to be measured. What was initially meant to be a positive, i.e. identify what is needed to perform well and measure it, in order that it can be managed, comes with the unintended negative consequence of overshadowing the other capabilities the workforce has. This also comes with an employee engagement price, for the measurements and management of workforce capabilities is to typically focus on where the workforce comes up short. Again, it makes sense to do this, since improving a capability that appears to result in improved performance benefits, both the individual through improved performance ratings and the company through improved productivity. But this is based on the assumption that the capabilities identified and their required proficiencies are the only attributes of the individual that matter. Anything else the individual brings that results in high performance, while resulting in a desired performance outcome, often goes unrecognized or underappreciated at best. As social media begins to occupy a more important part in current and future roles in organizations, businesses must incorporate social media savvy and innovation into job descriptions and expectations. These new measures could provide insight into how well someone can use social media tools to influence communities and decision makers; keep abreast of trends in fast-moving industries; present a positive brand image for the organization around thought leadership, customer focus, social responsibility; and coordinate and collaborate with partners. These measures should demonstrate the “social capital” the individual has invested in and developed over time. Without this dimension, “short cut” methods may generate a narrow set of positive metrics that do not have real, long-lasting benefits to the organization. How Workforce Reputation Management Helps HR Harness Social Media With hundreds of petabytes of social media data flowing across Facebook, LinkedIn and Twitter, businesses are tapping technology solutions to effectively leverage social for HR. Workforce reputation management technology helps organizations discover, mobilize and retain talent by providing insight into the social reputation and influence of the workforce while also helping organizations monitor employee social media policy compliance and mitigate social media risk.  There are three major ways that workforce reputation management technology can play a strategic role to support HR: 1. Improve Awareness and Decisions on Talent Many organizations measure the skills and competencies that they know they need today, but are unaware of what other skills and competencies their workforce has that could be essential tomorrow. How about whether your workforce has the reputation and influence to make their skills and competencies more effective? Many organizations don’t have insight into the social media “reach” their workforce has, which is becoming more critical to business performance. These features help organizations, managers, and employees improve many talent processes and decision making, including the following: Hiring and Assignments. People and teams with higher reputations are considered more valuable and effective workers. Someone with high reputation who refers a candidate also can have high credibility as a source for hires.   Training and Development. Reputation trend analysis can impact program decisions regarding training offerings by showing how reputation and influence across the workforce changes in concert with training. Worker reputation impacts development plans and goal choices by helping the individual see which development efforts result in improved reputation and influence.   Finding Hidden Talent. Managers can discover hidden talent and skills amongst employees based on a combination of social profile information and social media reputation. Employees can improve their personal brand and accelerate their career development.  2. Talent Search and Discovery The right technology helps organizations find information on people that might otherwise be hidden. By leveraging access to candidate and worker social profiles as well as their social relationships, workforce reputation management provides companies with a more complete picture of what their knowledge, skills, and attributes are and what they can in turn access. This more complete information helps to find the right talent both outside the organization as well as the right, perhaps previously hidden talent, within the organization to fill roles and staff projects, particularly those roles and projects that are required in reaction to fast-changing opportunities and circumstances. 3. Reputation Brings Credibility Workforce reputation management technology provides a clearer picture of how candidates and workers are viewed by their peers and communities across a wide range of social reputation and influence metrics. This information is less subject to individual bias and can impact critical decision-making. Knowing the individual’s reputation and influence enables the organization to predict how well their capabilities and behaviors will have a positive effect on desired business outcomes. Many roles that have the highest impact on overall business performance are dependent on the individual’s influence and reputation. In addition, reputation and influence measures offer a very tangible source of feedback for workers, providing them with insight that helps them develop themselves and their careers and see the effectiveness of those efforts by tracking changes over time in their reputation and influence. The following are some examples of the different reputation and influence measures of the workforce that Workforce Reputation Management could gather and analyze: Generosity – How often the user reposts other’s posts. Influence – How often the user’s material is reposted by others.  Engagement – The ratio of recent posts with references (e.g. links to other posts) to the total number of posts.  Activity – How frequently the user posts. (e.g. number per day)  Impact – The size of the users’ social networks, which indicates their ability to reach unique followers, friends, or users.   Clout – The number of references and citations of the user’s material in others’ posts.  The Vital Ingredient of Workforce Reputation Management: Employee Participation “Nothing about me, without me.” Valerie Billingham, “Through the Patient’s Eyes”, Salzburg Seminar Session 356, 1998 Since data resides primarily in social media, a question arises: what manner is used to collect that data? While much of social media activity is publicly accessible (as many who wished otherwise have learned to their chagrin), the social norms of social media have developed to put some restrictions on what is acceptable behavior and by whom. Disregarding these norms risks a repercussion firestorm. One of the more recognized norms is that while individuals can follow and engage with other individual’s public social activity (e.g. Twitter updates) fairly freely, the more an organization does this unprompted and without getting permission from the individual beforehand, the more likely the organization risks a totally opposite outcome from the one desired. Instead, the organization must look for permission from the individual, which can be met with resistance. That resistance comes from not knowing how the information will be used, how it will be shared with others, and not receiving enough benefit in return for granting permission. As the quote above about patient concerns and rights succinctly states, no one likes not feeling in control of the information about themselves, or the uncertainty about where it will be used. This is well understood in consumer social media (i.e. permission-based marketing) and is applicable to workforce reputation management. However, asking permission leaves open the very real possibility that no one, or so few, will grant permission, resulting in a small set of data with little usefulness for the company. Connecting Individual Motivation to Organization Needs So what is it that makes an individual decide to grant an organization access to the data it wants? It is when the individual’s own motivations are in alignment with the organization’s objectives. In the case of workforce reputation management, when the individual is motivated by a desire for increased visibility and career growth opportunities to advertise their skills and level of influence and reputation, they are aligned with the organizations’ objectives; to fill resource needs or strategically build better awareness of what skills are present in the workforce, as well as levels of influence and reputation. Individuals can see the benefit of granting access permission to the company through multiple means. One is through simple social awareness; they begin to discover that peers who are getting more career opportunities are those who are signed up for workforce reputation management. Another is where companies take the message directly to the individual; we think you would benefit from signing up with our workforce reputation management solution. Another, more strategic approach is to make reputation management part of a larger Career Development effort by the company; providing a wide set of tools to help the workforce find ways to plan and take action to achieve their career aspirations in the organization. An effective mechanism, that facilitates connecting the visibility and career growth motivations of the workforce with the larger context of the organization’s business objectives, is to use game mechanics to help individuals transform their career goals into concrete, actionable steps, such as signing up for reputation management. This works in favor of companies looking to use workforce reputation because the workforce is more apt to see how it fits into achieving their overall career goals, as well as seeing how other participation brings additional benefits.  Once an individual has signed up with reputation management, not only have they made themselves more visible within the organization and increased their career growth opportunities, they have also enabled a tool that they can use to better understand how their actions and behaviors impact their influence and reputation. Since they will be able to see their reputation and influence measurements change over time, they will gain better insight into how reputation and influence impacts their effectiveness in a role, as well as how their behaviors and skill levels in turn affect their influence and reputation. This insight can trigger much more directed, and effective, efforts by the individual to improve their ability to perform at a higher level and become more productive. The increased sense of autonomy the individual experiences, in linking the insight they gain to the actions and behavior changes they make, greatly enhances their engagement with their role as well as their career prospects within the company. Workforce reputation management takes the wide range of disparate data about the workforce being produced across various social media platforms and transforms it into accessible, relevant, and actionable information that helps the organization achieve its desired business objectives. Social media holds untapped insights about your talent, brand and business, and workforce reputation management can help unlock them. Imagine - if you could find the hidden secrets of your businesses, how much more productive and efficient would your organization be? Mark Bennett is a Director of Product Strategy at Oracle. Mark focuses on setting the strategic vision and direction for tools that help organizations understand, shape, and leverage the capabilities of their workforce to achieve business objectives, as well as help individuals work effectively to achieve their goals and navigate their own growth. His combination of a deep technical background in software design and development, coupled with a broad knowledge of business challenges and thinking in today’s globalized, rapidly changing, technology accelerated economy, has enabled him to identify and incorporate key innovations that are central to Oracle Fusion’s unique value proposition. Mark has over the course of his career been in charge of the design, development, and strategy of Talent Management products and the design and development of cutting edge software that is better equipped to handle the increasingly complex demands of users while also remaining easy to use. Follow him @mpbennett

  Read the article

• Currency Conversion in Oracle BI applications

  - by Saurabh Verma

  Authored by Vijay Aggarwal and Hichem Sellami A typical data warehouse contains Star and/or Snowflake schema, made up of Dimensions and Facts. The facts store various numerical information including amounts. Example; Order Amount, Invoice Amount etc. With the true global nature of business now-a-days, the end-users want to view the reports in their own currency or in global/common currency as defined by their business. This presents a unique opportunity in BI to provide the amounts in converted rates either by pre-storing or by doing on-the-fly conversions while displaying the reports to the users. Source Systems OBIA caters to various source systems like EBS, PSFT, Sebl, JDE, Fusion etc. Each source has its own unique and intricate ways of defining and storing currency data, doing currency conversions and presenting to the OLTP users. For example; EBS stores conversion rates between currencies which can be classified by conversion rates, like Corporate rate, Spot rate, Period rate etc. Siebel stores exchange rates by conversion rates like Daily. EBS/Fusion stores the conversion rates for each day, where as PSFT/Siebel store for a range of days. PSFT has Rate Multiplication Factor and Rate Division Factor and we need to calculate the Rate based on them, where as other Source systems store the Currency Exchange Rate directly. OBIA Design The data consolidation from various disparate source systems, poses the challenge to conform various currencies, rate types, exchange rates etc., and designing the best way to present the amounts to the users without affecting the performance. When consolidating the data for reporting in OBIA, we have designed the mechanisms in the Common Dimension, to allow users to report based on their required currencies. OBIA Facts store amounts in various currencies: Document Currency: This is the currency of the actual transaction. For a multinational company, this can be in various currencies. Local Currency: This is the base currency in which the accounting entries are recorded by the business. This is generally defined in the Ledger of the company. Global Currencies: OBIA provides five Global Currencies. Three are used across all modules. The last two are for CRM only. A Global currency is very useful when creating reports where the data is viewed enterprise-wide. Example; a US based multinational would want to see the reports in USD. The company will choose USD as one of the global currencies. OBIA allows users to define up-to five global currencies during the initial implementation. The term Currency Preference is used to designate the set of values: Document Currency, Local Currency, Global Currency 1, Global Currency 2, Global Currency 3; which are shared among all modules. There are four more currency preferences, specific to certain modules: Global Currency 4 (aka CRM Currency) and Global Currency 5 which are used in CRM; and Project Currency and Contract Currency, used in Project Analytics. When choosing Local Currency for Currency preference, the data will show in the currency of the Ledger (or Business Unit) in the prompt. So it is important to select one Ledger or Business Unit when viewing data in Local Currency. More on this can be found in the section: Toggling Currency Preferences in the Dashboard. Design Logic When extracting the fact data, the OOTB mappings extract and load the document amount, and the local amount in target tables. It also loads the exchange rates required to convert the document amount into the corresponding global amounts. If the source system only provides the document amount in the transaction, the extract mapping does a lookup to get the Local currency code, and the Local exchange rate. The Load mapping then uses the local currency code and rate to derive the local amount. The load mapping also fetches the Global Currencies and looks up the corresponding exchange rates. The lookup of exchange rates is done via the Exchange Rate Dimension provided as a Common/Conforming Dimension in OBIA. The Exchange Rate Dimension stores the exchange rates between various currencies for a date range and Rate Type. Two physical tables W_EXCH_RATE_G and W_GLOBAL_EXCH_RATE_G are used to provide the lookups and conversions between currencies. The data is loaded from the source system’s Ledger tables. W_EXCH_RATE_G stores the exchange rates between currencies with a date range. On the other hand, W_GLOBAL_EXCH_RATE_G stores the currency conversions between the document currency and the pre-defined five Global Currencies for each day. Based on the requirements, the fact mappings can decide and use one or both tables to do the conversion. Currency design in OBIA also taps into the MLS and Domain architecture, thus allowing the users to map the currencies to a universal Domain during the implementation time. This is especially important for companies deploying and using OBIA with multiple source adapters. Some Gotchas to Look for It is necessary to think through the currencies during the initial implementation. 1) Identify various types of currencies that are used by your business. Understand what will be your Local (or Base) and Documentation currency. Identify various global currencies that your users will want to look at the reports. This will be based on the global nature of your business. Changes to these currencies later in the project, while permitted, but may cause Full data loads and hence lost time. 2) If the user has a multi source system make sure that the Global Currencies and Global Rate Types chosen in Configuration Manager do have the corresponding source specific counterparts. In other words, make sure for every DW specific value chosen for Currency Code or Rate Type, there is a source Domain mapping already done. Technical Section This section will briefly mention the technical scenarios employed in the OBIA adaptors to extract data from each source system. In OBIA, we have two main tables which store the Currency Rate information as explained in previous sections. W_EXCH_RATE_G and W_GLOBAL_EXCH_RATE_G are the two tables. W_EXCH_RATE_G stores all the Currency Conversions present in the source system. It captures data for a Date Range. W_GLOBAL_EXCH_RATE_G has Global Currency Conversions stored at a Daily level. However the challenge here is to store all the 5 Global Currency Exchange Rates in a single record for each From Currency. Let’s voyage further into the Source System Extraction logic for each of these tables and understand the flow briefly. EBS: In EBS, we have Currency Data stored in GL_DAILY_RATES table. As the name indicates GL_DAILY_RATES EBS table has data at a daily level. However in our warehouse we store the data with a Date Range and insert a new range record only when the Exchange Rate changes for a particular From Currency, To Currency and Rate Type. Below are the main logical steps that we employ in this process. (Incremental Flow only) – Cleanup the data in W_EXCH_RATE_G. Delete the records which have Start Date > minimum conversion date Update the End Date of the existing records. Compress the daily data from GL_DAILY_RATES table into Range Records. Incremental map uses $$XRATE_UPD_NUM_DAY as an extra parameter. Generate Previous Rate, Previous Date and Next Date for each of the Daily record from the OLTP. Filter out the records which have Conversion Rate same as Previous Rates or if the Conversion Date lies within a single day range. Mark the records as ‘Keep’ and ‘Filter’ and also get the final End Date for the single Range record (Unique Combination of From Date, To Date, Rate and Conversion Date). Filter the records marked as ‘Filter’ in the INFA map. The above steps will load W_EXCH_RATE_GS. Step 0 updates/deletes W_EXCH_RATE_G directly. SIL map will then insert/update the GS data into W_EXCH_RATE_G. These steps convert the daily records in GL_DAILY_RATES to Range records in W_EXCH_RATE_G. We do not need such special logic for loading W_GLOBAL_EXCH_RATE_G. This is a table where we store data at a Daily Granular Level. However we need to pivot the data because the data present in multiple rows in source tables needs to be stored in different columns of the same row in DW. We use GROUP BY and CASE logic to achieve this. Fusion: Fusion has extraction logic very similar to EBS. The only difference is that the Cleanup logic that was mentioned in step 0 above does not use $$XRATE_UPD_NUM_DAY parameter. In Fusion we bring all the Exchange Rates in Incremental as well and do the cleanup. The SIL then takes care of Insert/Updates accordingly. PeopleSoft:PeopleSoft does not have From Date and To Date explicitly in the Source tables. Let’s look at an example. Please note that this is achieved from PS1 onwards only. 1 Jan 2010 – USD to INR – 45 31 Jan 2010 – USD to INR – 46 PSFT stores records in above fashion. This means that Exchange Rate of 45 for USD to INR is applicable for 1 Jan 2010 to 30 Jan 2010. We need to store data in this fashion in DW. Also PSFT has Exchange Rate stored as RATE_MULT and RATE_DIV. We need to do a RATE_MULT/RATE_DIV to get the correct Exchange Rate. We generate From Date and To Date while extracting data from source and this has certain assumptions: If a record gets updated/inserted in the source, it will be extracted in incremental. Also if this updated/inserted record is between other dates, then we also extract the preceding and succeeding records (based on dates) of this record. This is required because we need to generate a range record and we have 3 records whose ranges have changed. Taking the same example as above, if there is a new record which gets inserted on 15 Jan 2010; the new ranges are 1 Jan to 14 Jan, 15 Jan to 30 Jan and 31 Jan to Next available date. Even though 1 Jan record and 31 Jan have not changed, we will still extract them because the range is affected. Similar logic is used for Global Exchange Rate Extraction. We create the Range records and get it into a Temporary table. Then we join to Day Dimension, create individual records and pivot the data to get the 5 Global Exchange Rates for each From Currency, Date and Rate Type. Siebel: Siebel Facts are dependent on Global Exchange Rates heavily and almost none of them really use individual Exchange Rates. In other words, W_GLOBAL_EXCH_RATE_G is the main table used in Siebel from PS1 release onwards. As of January 2002, the Euro Triangulation method for converting between currencies belonging to EMU members is not needed for present and future currency exchanges. However, the method is still available in Siebel applications, as are the old currencies, so that historical data can be maintained accurately. The following description applies only to historical data needing conversion prior to the 2002 switch to the Euro for the EMU member countries. If a country is a member of the European Monetary Union (EMU), you should convert its currency to other currencies through the Euro. This is called triangulation, and it is used whenever either currency being converted has EMU Triangulation checked. Due to this, there are multiple extraction flows in SEBL ie. EUR to EMU, EUR to NonEMU, EUR to DMC and so on. We load W_EXCH_RATE_G through multiple flows with these data. This has been kept same as previous versions of OBIA. W_GLOBAL_EXCH_RATE_G being a new table does not have such needs. However SEBL does not have From Date and To Date columns in the Source tables similar to PSFT. We use similar extraction logic as explained in PSFT section for SEBL as well. What if all 5 Global Currencies configured are same? As mentioned in previous sections, from PS1 onwards we store Global Exchange Rates in W_GLOBAL_EXCH_RATE_G table. The extraction logic for this table involves Pivoting data from multiple rows into a single row with 5 Global Exchange Rates in 5 columns. As mentioned in previous sections, we use CASE and GROUP BY functions to achieve this. This approach poses a unique problem when all the 5 Global Currencies Chosen are same. For example – If the user configures all 5 Global Currencies as ‘USD’ then the extract logic will not be able to generate a record for From Currency=USD. This is because, not all Source Systems will have a USD->USD conversion record. We have _Generated mappings to take care of this case. We generate a record with Conversion Rate=1 for such cases. Reusable Lookups Before PS1, we had a Mapplet for Currency Conversions. In PS1, we only have reusable Lookups- LKP_W_EXCH_RATE_G and LKP_W_GLOBAL_EXCH_RATE_G. These lookups have another layer of logic so that all the lookup conditions are met when they are used in various Fact Mappings. Any user who would want to do a LKP on W_EXCH_RATE_G or W_GLOBAL_EXCH_RATE_G should and must use these Lookups. A direct join or Lookup on the tables might lead to wrong data being returned. Changing Currency preferences in the Dashboard: In the 796x series, all amount metrics in OBIA were showing the Global1 amount. The customer needed to change the metric definitions to show them in another Currency preference. Project Analytics started supporting currency preferences since 7.9.6 release though, and it published a Tech note for other module customers to add toggling between currency preferences to the solution. List of Currency Preferences Starting from 11.1.1.x release, the BI Platform added a new feature to support multiple currencies. The new session variable (PREFERRED_CURRENCY) is populated through a newly introduced currency prompt. This prompt can take its values from the xml file: userpref_currencies_OBIA.xml, which is hosted in the BI Server installation folder, under :< home>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\userpref_currencies.xml This file contains the list of currency preferences, like“Local Currency”, “Global Currency 1”,…which customers can also rename to give them more meaningful business names. There are two options for showing the list of currency preferences to the user in the dashboard: Static and Dynamic. In Static mode, all users will see the full list as in the user preference currencies file. In the Dynamic mode, the list shown in the currency prompt drop down is a result of a dynamic query specified in the same file. Customers can build some security into the rpd, so the list of currency preferences will be based on the user roles…BI Applications built a subject area: “Dynamic Currency Preference” to run this query, and give every user only the list of currency preferences required by his application roles. Adding Currency to an Amount Field When the user selects one of the items from the currency prompt, all the amounts in that page will show in the Currency corresponding to that preference. For example, if the user selects “Global Currency1” from the prompt, all data will be showing in Global Currency 1 as specified in the Configuration Manager. If the user select “Local Currency”, all amount fields will show in the Currency of the Business Unit selected in the BU filter of the same page. If there is no particular Business Unit selected in that filter, and the data selected by the query contains amounts in more than one currency (for example one BU has USD as a functional currency, the other has EUR as functional currency), then subtotals will not be available (cannot add USD and EUR amounts in one field), and depending on the set up (see next paragraph), the user may receive an error. There are two ways to add the Currency field to an amount metric: In the form of currency code, like USD, EUR…For this the user needs to add the field “Apps Common Currency Code” to the report. This field is in every subject area, usually under the table “Currency Tag” or “Currency Code”… In the form of currency symbol ($ for USD, € for EUR,…) For this, the user needs to format the amount metrics in the report as a currency column, by specifying the currency tag column in the Column Properties option in Column Actions drop down list. Typically this column should be the “BI Common Currency Code” available in every subject area. Select Column Properties option in the Edit list of a metric. In the Data Format tab, select Custom as Treat Number As. Enter the following syntax under Custom Number Format: [$:currencyTagColumn=Subjectarea.table.column] Where Column is the “BI Common Currency Code” defined to take the currency code value based on the currency preference chosen by the user in the Currency preference prompt.

  Read the article

• VS 2012 Code Review &ndash; Before Check In OR After Check In?

  - by Tarun Arora

  “Is Code Review Important and Effective?” There is a consensus across the industry that code review is an effective and practical way to collar code inconsistency and possible defects early in the software development life cycle. Among others some of the advantages of code reviews are, Bugs are found faster Forces developers to write readable code (code that can be read without explanation or introduction!) Optimization methods/tricks/productive programs spread faster Programmers as specialists "evolve" faster It's fun “Code review is systematic examination (often known as peer review) of computer source code. It is intended to find and fix mistakes overlooked in the initial development phase, improving both the overall quality of software and the developers' skills. Reviews are done in various forms such as pair programming, informal walkthroughs, and formal inspections.” Wikipedia No where does the definition mention whether its better to review code before the code has been committed to version control or after the commit has been performed. No matter which side you favour, Visual Studio 2012 allows you to request for a code review both before check in and also request for a review after check in. Let’s weigh the pros and cons of the approaches independently. Code Review Before Check In or Code Review After Check In? Approach 1 – Code Review before Check in Developer completes the code and feels the code quality is appropriate for check in to TFS. The developer raises a code review request to have a second pair of eyes validate if the code abides to the recommended best practices, will not result in any defects due to common coding mistakes and whether any optimizations can be made to improve the code quality.                                             Image 1 – code review before check in Pros Everything that gets committed to source control is reviewed. Minimizes the chances of smelly code making its way into the code base. Decreases the cost of fixing bugs, remember, the earlier you find them, the lesser the pain in fixing them. Cons Development Code Freeze – Since the changes aren’t in the source control yet. Further development can only be done off-line. The changes have not been through a CI build, hard to say whether the code abides to all build quality standards. Inconsistent! Cumbersome to track the actual code review process.  Not every change to the code base is worth reviewing, a lot of effort is invested for very little gain. Approach 2 – Code Review after Check in Developer checks in, random code reviews are performed on the checked in code.                                                      Image 2 – Code review after check in Pros The code has already passed the CI build and run through any code analysis plug ins you may have running on the build server. Instruct the developer to ensure ZERO fx cop, style cop and static code analysis before check in. Code is cleaner and smell free even before the code review. No Offline development, developers can continue to develop against the source control. Cons Bad code can easily make its way into the code base. Since the review take place much later in the cycle, the cost of fixing issues can prove to be much higher. Approach 3 – Hybrid Approach The community advocates a more hybrid approach, a blend of tooling and human accountability quotient.                                                               Image 3 – Hybrid Approach 1. Code review high impact check ins. It is not possible to review everything, by setting up code review check in policies you can end up slowing your team. More over, the code that you are reviewing before check in hasn't even been through a green CI build either. 2. Tooling. Let the tooling work for you. By running static analysis, fx cop, style cop and other plug ins on the build agent, you can identify the real issues that in my opinion can't possibly be identified using human reviews. Configure the tooling to report back top 10 issues every day. Mandate the manual code review of individuals who keep making it to this list of shame more often. 3. During Merge. I would prefer eliminating some of the other code issues during merge from Main branch to the release branch. In a scrum project this is still easier because cheery picking the merges is a possibility and the size of code being reviewed is still limited. Let the tooling work for you, if some one breaks the CI build often, put them on a gated check in build course until you see improvement. If some one appears on the top 10 list of shame generated via the build then ensure that all their code is reviewed till you see improvement. At the end of the day, the goal is to ensure that the code being delivered is top quality. By enforcing a code review before any check in, you force the developer to work offline or stay put till the review is complete. What do the experts say? So I asked a few expects what they thought of “Code Review quality gate before Checking in code?" Terje Sandstrom | Microsoft ALM MVP You mean a review quality gate BEFORE checking in code????? That would mean a lot of code staying either local or in shelvesets, and not even been through a CI build, and a green CI build being the main criteria for going further, f.e. to the review state. I would not like code laying around with no checkin’s. Having a requirement that code is checked in small pieces, 4-8 hours work max, and AT LEAST daily checkins, a manual code review comes second down the lane. I would expect review quality gates to happen before merging back to main, or before merging to release.  But that would all be on checked-in code.  Branching is absolutely one way to ease the pain.   Another way we are using is automatic quality builds, running metrics, coverage, static code analysis.  Unfortunately it takes some time, would be great to be on CI’s – but…., so it’s done scheduled every night. Based on this we get, among other stuff,  top 10 lists of suspicious code, which is then subjected to reviews.  If a person seems to be very popular on these top 10 lists, we subject every check in from that person to a review for a period. That normally helps.   None of the clients I have can afford to have every checkin reviewed, so we need to find ways around it. I don’t disagree with the nicety of having all the code reviewed, but I find it hard to find those resources in today’s enterprises. David V. Corbin | Visual Studio ALM Ranger I tend to agree with both sides. I hate having code that is not checked in, but at the same time hate having “bad” code in the repository. I have found that branching is one approach to solving this dilemma. Code is checked into the private/feature branch before the review, but is not merged over to the “official” branch until after the review. I advocate both, depending on circumstance (especially team dynamics)   - The “pre-checkin” is usually for elements that may impact the project as a whole. Think of it as another “gate” along with passing unit tests. - The “post-checkin” may very well not be at the changeset level, but correlates to a review at the “user story” level.   Again, this depends on team dynamics in play…. Robert MacLean | Microsoft ALM MVP I do not think there is no right answer for the industry as a whole. In short the question is why do you do reviews? Your question implies risk mitigation, so in low risk areas you can get away with it after check in while in high risk you need to do it before check in. An example is those new to a team or juniors need it much earlier (maybe that is before checkin, maybe that is soon after) than seniors who have shipped twenty sprints on the team. Abhimanyu Singhal | Visual Studio ALM Ranger Depends on per scenario basis. We recommend post check-in reviews when: 1. We don't want to block other checks and processes on manual code reviews. Manual reviews take time, and some pieces may not require manual reviews at all. 2. We need to trace all changes and track history. 3. We have a code promotion strategy/process in place. For risk mitigation, post checkin code can be promoted to Accepted branches. Or can be rejected. Pre Checkin Reviews are used when 1. There is a high risk factor associated 2. Reviewers are generally (most of times) have immediate availability. 3. Team does not have strict tracking needs. Simply speaking, no single process fits all scenarios. You need to select what works best for your team/project. Thomas Schissler | Visual Studio ALM Ranger This is an interesting discussion, I’m right now discussing details about executing code reviews with my teams. I see and understand the aspects you brought in, but there is another side as well, I’d like to point out. 1.) If you do reviews per check in this is not very practical as a hard rule because this will disturb the flow of the team very often or it will lead to reduce the checkin frequency of the devs which I would not accept. 2.) If you do later reviews, for example if you review PBIs, it is not easy to find out which code you should review. Either you review all changesets associate with the PBI, but then you might review code which has been changed with a later checkin and the dev maybe has already fixed the issue. Or you review the diff of the latest changeset of the PBI with the first but then you might also review changes of other PBIs. Jakob Leander | Sr. Director, Avanade In my experience, manual code review: 1. Does not get done and at the very least does not get redone after changes (regardless of intentions at start of project) 2. When a project actually do it, they often do not do it right away = errors pile up 3. Requires a lot of time discussing/defining the standard and for the team to learn it However code review is very important since e.g. even small memory leaks in a high volume web solution have big consequences In the last years I have advocated following approach for code review - Architects up front do “at least one best practice example” of each type of component and tell the team. Copy from this one. This should include error handling, logging, security etc. - Dev lead on project continuously browse code to validate that the best practices are used. Especially that patterns etc. are not broken. You can do this formally after each sprint/iteration if you want. Once this is validated it is unlikely to “go bad” even during later code changes Agree with customer to rely on static code analysis from Visual Studio as the one and only coding standard. This has HUUGE benefits - You can easily tweak to reach the level you desire together with customer - It is easy to measure for both developers/management - It is 100% consistent across code base - It gets validated all the time so you never end up getting hammered by a customer review in the end - It is easy to tell the developer that you do not want code back unless it has zero errors = minimize communication You need to track this at least during nightly builds and make sure team sees total # issues. Do not allow #issues it to grow uncontrolled. On the project I run I require code analysis to have run on code before checkin (checkin rule). This means -  You have to have clean compile (or CA wont run) so this is extra benefit = very few broken builds - You can change a few of the rules to compile as errors instead of warnings. I often do this for “missing dispose” issues which you REALLY do not want in your app Tip: Place your custom CA rules files as part of solution. That  way it works when you do branching etc. (path to CA file is relative in VS) Some may argue that CA is not as good as manual inspection. But since manual inspection in reality suffers from the 3 issues in start it is IMO a MUCH better (and much cheaper) approach from helicopter perspective Tirthankar Dutta | Director, Avanade I think code review should be run both before and after check ins. There are some code metrics that are meant to be run on the entire codebase … Also, especially on multi-site projects, one should strive to architect in a way that lets men manage the framework while boys write the repetitive code… scales very well with the need to review less by containment and imposing architectural restrictions to emphasise the design. Bruno Capuano | Microsoft ALM MVP For code reviews (means peer reviews) in distributed team I use http://www.vsanywhere.com/default.aspx  David Jobling | Global Sr. Director, Avanade Peer review is the only way to scale and its a great practice for all in the team to learn to perform and accept. In my experience you soon learn who's code to watch more than others and tune the attention. Mikkel Toudal Kristiansen | Manager, Avanade If you have several branches in your code base, you will need to merge often. This requires manual merging, when a file has been changed in both branches. It offers a good opportunity to actually review to changed code. So my advice is: Merging between branches should be done as often as possible, it should be done by a senior developer, and he/she should perform a full code review of the code being merged. As for detecting architectural smells and code smells creeping into the code base, one really good third party tools exist: Ndepend (http://www.ndepend.com/, for static code analysis of the current state of the code base). You could also consider adding StyleCop to the solution. Jesse Houwing | Visual Studio ALM Ranger I gave a presentation on this subject on the TechDays conference in NL last year. See my presentation and slides here (talk in Dutch, but English presentation): http://blog.jessehouwing.nl/2012/03/did-you-miss-my-techdaysnl-talk-on-code.html  I’d like to add a few more points: - Before/After checking is mostly a trust issue. If you have a team that does diligent peer reviews and regularly talk/sit together or peer review, there’s no need to enforce a before-checkin policy. The peer peer-programming and regular feedback during development can take care of most of the review requirements as long as the team isn’t under stress. - Under stress, enforce pre-checkin reviews, it might sound strange, if you’re already under time or budgetary constraints, but it is under such conditions most real issues start to be created or pile up. - Use tools to catch most common errors, Code Analysis/FxCop was already mentioned. HP Fortify, Resharper, Coderush etc can help you there. There are also a lot of 3rd party rules you can add to Code Analysis. I’ve written a few myself (http://fccopcontrib.codeplex.com) and various teams from Microsoft have added their own rules (MSOCAF for SharePoint, WSSF for WCF). For common errors that keep cropping up, see if you can define a rule. It’s much easier. But more importantly make sure you have a good help page explaining *WHY* it's wrong. If you have small feature or developer branches/shelvesets, you might want to review pre-merge. It’s still better to do peer reviews and peer programming, but the most important thing is that bad quality code doesn’t make it into the important branch. So my philosophy: - Use tooling as much as possible. - Make sure the team understands the tooling and the importance of the things it flags. It’s too easy to just click suppress all to ignore the warnings. - Under stress, tighten process, it’s under stress that the problems of late reviews will really surface - Most importantly if you do reviews do them as early as possible, but never later than needed. In other words, pre-checkin/post checking doesn’t really matter, as long as the review is done before the code is released. It’ll just be much more expensive to fix any review outcomes the later you find them. --- I would love to hear what you think!

  Read the article

• The Benefits of Smart Grid Business Software

  - by Sylvie MacKenzie, PMP

  Smart Grid Background What Are Smart Grids?Smart Grids use computer hardware and software, sensors, controls, and telecommunications equipment and services to: Link customers to information that helps them manage consumption and use electricity wisely. Enable customers to respond to utility notices in ways that help minimize the duration of overloads, bottlenecks, and outages. Provide utilities with information that helps them improve performance and control costs. What Is Driving Smart Grid Development? Environmental ImpactSmart Grid development is picking up speed because of the widespread interest in reducing the negative impact that energy use has on the environment. Smart Grids use technology to drive efficiencies in transmission, distribution, and consumption. As a result, utilities can serve customers’ power needs with fewer generating plants, fewer transmission and distribution assets,and lower overall generation. With the possible exception of wind farm sprawl, landscape preservation is one obvious benefit. And because most generation today results in greenhouse gas emissions, Smart Grids reduce air pollution and the potential for global climate change.Smart Grids also more easily accommodate the technical difficulties of integrating intermittent renewable resources like wind and solar into the grid, providing further greenhouse gas reductions. CostsThe ability to defer the cost of plant and grid expansion is a major benefit to both utilities and customers. Utilities do not need to use as many internal resources for traditional infrastructure project planning and management. Large T&D infrastructure expansion costs are not passed on to customers.Smart Grids will not eliminate capital expansion, of course. Transmission corridors to connect renewable generation with customers will require major near-term expenditures. Additionally, in the future, electricity to satisfy the needs of population growth and additional applications will exceed the capacity reductions available through the Smart Grid. At that point, expansion will resume—but with greater overall T&D efficiency based on demand response, load control, and many other Smart Grid technologies and business processes. Energy efficiency is a second area of Smart Grid cost saving of particular relevance to customers. The timely and detailed information Smart Grids provide encourages customers to limit waste, adopt energy-efficient building codes and standards, and invest in energy efficient appliances. Efficiency may or may not lower customer bills because customer efficiency savings may be offset by higher costs in generation fuels or carbon taxes. It is clear, however, that bills will be lower with efficiency than without it. Utility Operations Smart Grids can serve as the central focus of utility initiatives to improve business processes. Many utilities have long “wish lists” of projects and applications they would like to fund in order to improve customer service or ease staff’s burden of repetitious work, but they have difficulty cost-justifying the changes, especially in the short term. Adding Smart Grid benefits to the cost/benefit analysis frequently tips the scales in favor of the change and can also significantly reduce payback periods.Mobile workforce applications and asset management applications work together to deploy assets and then to maintain, repair, and replace them. Many additional benefits result—for instance, increased productivity and fuel savings from better routing. Similarly, customer portals that provide customers with near-real-time information can also encourage online payments, thus lowering billing costs. Utilities can and should include these cost and service improvements in the list of Smart Grid benefits. What Is Smart Grid Business Software? Smart Grid business software gathers data from a Smart Grid and uses it improve a utility’s business processes. Smart Grid business software also helps utilities provide relevant information to customers who can then use it to reduce their own consumption and improve their environmental profiles. Smart Grid Business Software Minimizes the Impact of Peak Demand Utilities must size their assets to accommodate their highest peak demand. The higher the peak rises above base demand: The more assets a utility must build that are used only for brief periods—an inefficient use of capital. The higher the utility’s risk profile rises given the uncertainties surrounding the time needed for permitting, building, and recouping costs. The higher the costs for utilities to purchase supply, because generators can charge more for contracts and spot supply during high-demand periods. Smart Grids enable a variety of programs that reduce peak demand, including: Time-of-use pricing and critical peak pricing—programs that charge customers more when they consume electricity during peak periods. Pilot projects indicate that these programs are successful in flattening peaks, thus ensuring better use of existing T&D and generation assets. Direct load control, which lets utilities reduce or eliminate electricity flow to customer equipment (such as air conditioners). Contracts govern the terms and conditions of these turn-offs. Indirect load control, which signals customers to reduce the use of on-premises equipment for contractually agreed-on time periods. Smart Grid business software enables utilities to impose penalties on customers who do not comply with their contracts. Smart Grids also help utilities manage peaks with existing assets by enabling: Real-time asset monitoring and control. In this application, advanced sensors safely enable dynamic capacity load limits, ensuring that all grid assets can be used to their maximum capacity during peak demand periods. Real-time asset monitoring and control applications also detect the location of excessive losses and pinpoint need for mitigation and asset replacements. As a result, utilities reduce outage risk and guard against excess capacity or “over-build”. Better peak demand analysis. As a result: Distribution planners can better size equipment (e.g. transformers) to avoid over-building. Operations engineers can identify and resolve bottlenecks and other inefficiencies that may cause or exacerbate peaks. As above, the result is a reduction in the tendency to over-build. Supply managers can more closely match procurement with delivery. As a result, they can fine-tune supply portfolios, reducing the tendency to over-contract for peak supply and reducing the need to resort to spot market purchases during high peaks. Smart Grids can help lower the cost of remaining peaks by: Standardizing interconnections for new distributed resources (such as electricity storage devices). Placing the interconnections where needed to support anticipated grid congestion. Smart Grid Business Software Lowers the Cost of Field Services By processing Smart Grid data through their business software, utilities can reduce such field costs as: Vegetation management. Smart Grids can pinpoint momentary interruptions and tree-caused outages. Spatial mash-up tools leverage GIS models of tree growth for targeted vegetation management. This reduces the cost of unnecessary tree trimming. Service vehicle fuel. Many utility service calls are “false alarms.” Checking meter status before dispatching crews prevents many unnecessary “truck rolls.” Similarly, crews use far less fuel when Smart Grid sensors can pinpoint a problem and mobile workforce applications can then route them directly to it. Smart Grid Business Software Ensures Regulatory Compliance Smart Grids can ensure compliance with private contracts and with regional, national, or international requirements by: Monitoring fulfillment of contract terms. Utilities can use one-hour interval meters to ensure that interruptible (“non-core”) customers actually reduce or eliminate deliveries as required. They can use the information to levy fines against contract violators. Monitoring regulations imposed on customers, such as maximum use during specific time periods. Using accurate time-stamped event history derived from intelligent devices distributed throughout the smart grid to monitor and report reliability statistics and risk compliance. Automating business processes and activities that ensure compliance with security and reliability measures (e.g. NERC-CIP 2-9). Grid Business Software Strengthens Utilities’ Connection to Customers While Reducing Customer Service Costs During outages, Smart Grid business software can: Identify outages more quickly. Software uses sensors to pinpoint outages and nested outage locations. They also permit utilities to ensure outage resolution at every meter location. Size outages more accurately, permitting utilities to dispatch crews that have the skills needed, in appropriate numbers. Provide updates on outage location and expected duration. This information helps call centers inform customers about the timing of service restoration. Smart Grids also facilitates display of outage maps for customer and public-service use. Smart Grids can significantly reduce the cost to: Connect and disconnect customers. Meters capable of remote disconnect can virtually eliminate the costs of field crews and vehicles previously required to change service from the old to the new residents of a metered property or disconnect customers for nonpayment. Resolve reports of voltage fluctuation. Smart Grids gather and report voltage and power quality data from meters and grid sensors, enabling utilities to pinpoint reported problems or resolve them before customers complain. Detect and resolve non-technical losses (e.g. theft). Smart Grids can identify illegal attempts to reconnect meters or to use electricity in supposedly vacant premises. They can also detect theft by comparing flows through delivery assets with billed consumption. Smart Grids also facilitate outreach to customers. By monitoring and analyzing consumption over time, utilities can: Identify customers with unusually high usage and contact them before they receive a bill. They can also suggest conservation techniques that might help to limit consumption. This can head off “high bill” complaints to the contact center. Note that such “high usage” or “additional charges apply because you are out of range” notices—frequently via text messaging—are already common among mobile phone providers. Help customers identify appropriate bill payment alternatives (budget billing, prepayment, etc.). Help customers find and reduce causes of over-consumption. There’s no waiting for bills in the mail before they even understand there is a problem. Utilities benefit not just through improved customer relations but also through limiting the size of bills from customers who might struggle to pay them. Where permitted, Smart Grids can open the doors to such new utility service offerings as: Monitoring properties. Landlords reduce costs of vacant properties when utilities notify them of unexpected energy or water consumption. Utilities can perform similar services for owners of vacation properties or the adult children of aging parents. Monitoring equipment. Power-use patterns can reveal a need for equipment maintenance. Smart Grids permit utilities to alert owners or managers to a need for maintenance or replacement. Facilitating home and small-business networks. Smart Grids can provide a gateway to equipment networks that automate control or let owners access equipment remotely. They also facilitate net metering, offering some utilities a path toward involvement in small-scale solar or wind generation. Prepayment plans that do not need special meters. Smart Grid Business Software Helps Customers Control Energy Costs There is no end to the ways Smart Grids help both small and large customers control energy costs. For instance: Multi-premises customers appreciate having all meters read on the same day so that they can more easily compare consumption at various sites. Customers in competitive regions can match their consumption profile (detailed via Smart Grid data) with specific offerings from competitive suppliers. Customers seeing inexplicable consumption patterns and power quality problems may investigate further. The result can be discovery of electrical problems that can be resolved through rewiring or maintenance—before more serious fires or accidents happen. Smart Grid Business Software Facilitates Use of Renewables Generation from wind and solar resources is a popular alternative to fossil fuel generation, which emits greenhouse gases. Wind and solar generation may also increase energy security in regions that currently import fossil fuel for use in generation. Utilities face many technical issues as they attempt to integrate intermittent resource generation into traditional grids, which traditionally handle only fully dispatchable generation. Smart Grid business software helps solves many of these issues by: Detecting sudden drops in production from renewables-generated electricity (wind and solar) and automatically triggering electricity storage and smart appliance response to compensate as needed. Supporting industry-standard distributed generation interconnection processes to reduce interconnection costs and avoid adding renewable supplies to locations already subject to grid congestion. Facilitating modeling and monitoring of locally generated supply from renewables and thus helping to maximize their use. Increasing the efficiency of “net metering” (through which utilities can use electricity generated by customers) by: Providing data for analysis. Integrating the production and consumption aspects of customer accounts. During non-peak periods, such techniques enable utilities to increase the percent of renewable generation in their supply mix. During peak periods, Smart Grid business software controls circuit reconfiguration to maximize available capacity. Conclusion Utility missions are changing. Yesterday, they focused on delivery of reasonably priced energy and water. Tomorrow, their missions will expand to encompass sustainable use and environmental improvement.Smart Grids are key to helping utilities achieve this expanded mission. But they come at a relatively high price. Utilities will need to invest heavily in new hardware, software, business process development, and staff training. Customer investments in home area networks and smart appliances will be large. Learning to change the energy and water consumption habits of a lifetime could ultimately prove even more formidable tasks.Smart Grid business software can ease the cost and difficulties inherent in a needed transition to a more flexible, reliable, responsive electricity grid. Justifying its implementation, however, requires a full understanding of the benefits it brings—benefits that can ultimately help customers, utilities, communities, and the world address global issues like energy security and climate change while minimizing costs and maximizing customer convenience. This white paper is available for download here. For further information about Oracle's Primavera Solutions for Utilities, please read our Utilities e-book.

  Read the article

• CodePlex Daily Summary for Thursday, March 15, 2012

  CodePlex Daily Summary for Thursday, March 15, 2012Popular ReleasesPulse: Pulse Beta 4: This version is still in development but should include: Logging and error handling have been greatly improved. If you run into an error or Pulse crashes make sure to check the Log folder for a recently modified log file so you can report the details of the issue A bunch of new features for the Wallbase.cc provider. Cleaner separation between inputs, downloading and output. Input and downloading are fairly clean now but outputs are still mixed up in the mix which I'm trying to resolve ...Google Books Downloader for Windows: Google Books Downloader-2.0.0.0.: Google Books DownloaderFinestra Virtual Desktops: 2.5.4501: This is a very minor update release. Please see the information about the 2.5 and 2.5.4500 releases for more information on recent changes. This update did not even have an automatic update triggered for it. Adds error checking and reporting to all threads, not only those with message loopsAcDown????? - Anime&Comic Downloader: AcDown????? v3.9.2: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...C.B.R. : Comic Book Reader: CBR 0.6: 20 Issue trackers are closed and a lot of bugs too Localize view is now MVVM and delete is working. Added the unused flag (take care that it goes to true only when displaying screen elements) Backstage - new input/output format choice control for the conversion Backstage - Add display, behaviour and register file type options in the extended options dialog Explorer list view has been transformed to a custom control. New group header, colunms order and size are saved Single insta...Windows Azure Toolkit for Windows 8: Windows Azure Toolkit for Windows 8 Consumer Prv: Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v 1.2.0 Please download this for Windows Azure Toolkit for Windows 8 functionality on Windows 8 Consumer Preview. The core features of the toolkit include: Automated Install – Scripted install of all dependencies including Visual Studio 2010 Express and the Windows Azure SDK on Windows 8 Consumer Preview. Project Templates – Windows 8 Metro Style app project templates in Dev 11 in both XAML/C# and HTML5/JS with a suppor...CODE Framework: 4.0.20312.0: This version includes significant improvements in the WPF system (and the WPF MVVM/MVC system). This includes new styles for Metro controls and layouts. Improved color handling. It also includes an improved theme/style swapping engine down to active (open) views. There also are various other enhancements and small fixes throughout the entire framework.ScintillaNET: ScintillaNET 2.4: 3/12/2012 Jacob Slusser Added support for annotations. Issues Fixed with this Release Issue # Title 25012 25012 25018 25018 25023 25023 25014 25014 Visual Studio ALM Quick Reference Guidance: v3 - For Visual Studio 11: RELEASE README Welcome to the BETA release of the Quick Reference Guide preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation ...AvalonDock: AvalonDock 2.0.0345: Welcome to early alpha release of AvalonDock 2.0 I've completely rewritten AvalonDock in order to take full advantage of the MVVM pattern. New version also boost a lot of new features: 1) Deep separation between model and layout. 2) Full WPF binding support thanks to unified logical tree between main docking manager, auto-hide windows and floating windows. 3) Support for Aero semi-maximized windows feature. 4) Support for multiple panes in the same floating windows. For a short list of new f...Windows Azure PowerShell Cmdlets: Windows Azure PowerShell Cmdlets 2.2.2: Changes Added Start Menu Item for Easy Startup Added Link to Getting Started Document Added Ability to Persist Subscription Data to Disk Fixed Get-Deployment to not throw on empty slot Simplified numerous default values for cmdlets Breaking Changes: -SubscriptionName is now mandatory in Set-Subscription. -DefaultStorageAccountName and -DefaultStorageAccountKey parameters were removed from Set-Subscription. Instead, when adding multiple accounts to a subscription, each one needs to be added ...IronPython: 2.7.2.1: On behalf of the IronPython team, I'm happy to announce the final release IronPython 2.7.2. This release includes everything from IronPython 54498 and 62475 as well. Like all IronPython 2.7-series releases, .NET 4 is required to install it. Installing this release will replace any existing IronPython 2.7-series installation. Unlike previous releases, the assemblies for all supported platforms are included in the installer as well as the zip package, in the "Platforms" directory. IronPython 2...Kooboo CMS: Kooboo CMS 3.2.0.0: Breaking changes: When upgrade from previous versions, MUST reset the all the content type templates, otherwise the content manager might get a compile error. New features Integrate with Windows azure. See: http://wiki.kooboo.com/?wiki=Kooboo CMS on Azure Complete solution to deploy on load balance servers. See: http://wiki.kooboo.com/?wiki=Kooboo CMS load balance Update Jquery and Jquery ui to the lastest version(Jquery 1.71, Jquery UI 1.8.16). Tree style text content editing. See:h...SubExtractor: Release 1026: Fix: multi-colored bluray subs will no longer result in black blob for OCR Fix: dvds with no language specified will not cause exception in name creation of subtitle files Fix: Root directory Dvds will use volume label as their directory nameExtensions for Reactive Extensions (Rxx): Rxx 1.3: Please read the latest release notes for details about what's new. Related Work Items Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many wrappers that convert asynchronous Framework Class Library APIs into observables. Many useful types such as ListSubject<T>, DictionarySubject<T>, CommandSubject, ViewModel, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T>, Scala...Skype Auto Recorder: SkypeAutoRecorder 1.2: Fixed the issue when application doesn't record MP3-file for some reason. Implemented support of Skype disconnects and connection problems during conversation. Implemented {duration} placeholder. Improved settings loading. Several code improvements and optimizations. Read more about changes on my blogPlayer Framework by Microsoft: Player Framework for Windows 8 Metro (Preview): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications. Additional DownloadsIIS Smooth Streaming Client SDK for Windows 8WPF Application Framework (WAF): WAF for .NET 4.5 (Experimental): Version: 2.5.0.440 (Experimental): This is an experimental release! It can be used to investigate the new .NET Framework 4.5 features. The ideas shown in this release might come in a future release (after 2.5) of the WPF Application Framework (WAF). More information can be found in this dicussion post. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 11) The unit test projects require Visual Studio 11 Professional Changelog All: Upgrade all proje...SSH.NET Library: 2012.3.9: There are still few outstanding issues I wanted to include in this release but since its been a while and there are few new features already I decided to create a new release now. New Features Add SOCKS4, SOCKS5 and HTTP Proxy support when connecting to remote server. For silverlight only IP address can be used for server address when using proxy. Add dynamic port forwarding support using ForwardedPortDynamic class. Add new ShellStream class to work with SSH Shell. Add supports for mu...Test Case Import Utilities for Visual Studio 2010 and Visual Studio 11 Beta: V1.2 RTM: This release (V1.2 RTM) includes: Support for connecting to Hosted Team Foundation Server Preview. Support for connecting to Team Foundation Server 11 Beta. Fix to issue with read-only attribute being set for LinksMapping-ReportFile which may have led to problems when saving the report file. Fix to issue with “related links” not being set properly in certain conditions. Fix to ensure that tool works fine when the Excel file contained rich text data. Note: Data is still imported in pl...New ProjectsAjayLabs: ajaylabsAltairStudios.Core: AltairStudios.Core is a MVC framework extension with utils and administrationBdRise: BdRiseBenchmark.NET: Benchmark.NET makes it easier to measure the execution time of a piece of code. Internally it uses System.Diagnostics.Stopwatch so it is of higher precision that querying System.DateTime.Now. Instead of var sw = Stopwatch.StartNew(); int i; for(i = 0; i < 1000; i++) { TestSomePieceOfCode(); } sw.Stop(); var ticksPerIteration = sw.Elapsed.Ticks / i; you can just var result = Benchmark.Sequentially(()=>TestSomePieceOfCode()); Also, you can do parallel benchmarks, use...CodedUITest OrderedTest BatchRunner: CUITBatchRunner makes it easier to create a suite of CodedUITest orderedtests and execute for desired iterations(re-iterates only for failed tests). Execute CUIT orderedtests unattended with or without VSTS 2010 (at least Test Agent) installed. It's developed using C#/.NET 4.0CoseaCRM: Cosea CRM (CRM especializado en empresas de Recursos Humanos)CoseaRecluta2: Sistema de reclutamiento de personal CoseaRH: Sistema de Recursos Humanos InternoDevme.Diagnostics: Diagnostics tools collection for .NETDiplomová práce: Diplomová práceDynamics AX (Axapta) Sync AutoFix: A Dynamics AX 2012 class that will change the IDs of the tables from the SQLDictionary to match the AOT IDs.EHS Parents' Guild Cafeteria Volunteer Reminder System: EHS has a large group of volunteers who assist during lunch time at the school. Volunteers are assigned a specific day of the month, such as the 2nd Monday or the 3rd Friday. There is a need for a reminder email to be sent to volunteers 3-4 days in advance.EladPlus Source Code: EladPlus Source Code Offical EladPlus makes it easier for Everyone to Open Things On your PC. You'll no longer have to Search Things On Your Computer. It's developed in C#. EladPlus 1.0.1 Beta 2 ChangeLog: 1.Spotlight - Search Things Fastly On The Web And On EladPlus 2.EladPlus Utilties System Requirements: Windows 8Dev/Consumer Windows 7 Windows Vista - May Work Slowly Windows XP Adobe Flash Player 10.0 IE 7eSheet - H? th?ng qu?n lý n?i dung: eSheet - H? th?ng qu?n lý n?i dungEwk.Math: Math libraryIndonesia News: Menyajikan berita nasional dan informasi terkini tentang berbagai peristiwa yang terjadi di Indonesia.Liuyi.Phone.StartTileGroup: Liuyi.Phone.StartTileGroup 2012 LiuyiMDX Query Reader: Mdx Query Reader can read mdx queries in ssrs report rdl files with parameters replaced by default values. That way you can transfer your query to ssms and run it without rewriting parameter values manually. Works without installing and is extremely simple to use.Microsoft Script Explorer for Windows PowerShell: Microsoft Script Explorer for Windows PowerShell (Script Explorer) allows users to search for scripts in local and online script repositories such as the TechNet Script Center and PoshCode. Available scripts returned by searching are organized by category, and you can also search for scripts from local and trusted community repositories by applying filters based on focus areas. Search results return code samples, information about script usage, and articles about the scripts. When you find th...Orchard Simple Media Picker: A simple way to fill an input field with the url for a media file in Orchard CMS. POSSchemas: Aplicación Windows Form para generar codigo SQL y codigo C# a partir de tablas en SQL Serverpvmapper: PVMapper is an open source project focused on developing web tools for mapping locations for photovoltaic energy development.Skeleton.NET: Skeleton.NET is targeted to be a RAD Framework for Desktop and Web Applications. It will contain several blocks that are used in application development, like logging ,repository, crud, messaging, ....Softcenter Ado Library: This library can be used to implement runtime polymorphism to support any registered ADO.NET DataProvider. SPBSU IFMO schedule parser ^_^: ?????? ?????????? ? ????? ifmo.ruSudoku Library: Sudoku Library will provide a .Net library capable of creating and solving sudoku puzzles. The goal of this project is to be; light weight, efficient, and fast. This will not include an implementation of the game that is playable.System.Windows.Explorer.ContextMenu: This project aims to make developing Windows Explorer Context Menu shell extensions as simple as possible. The resulting code is event driven and hides all of the Win32 API and Shell Interfaces away from the developer.test2: test2 projektTime Sheet Management: Project personalTvUnit: TvUnit?TvRock????????、??????·???????々?????????????Windows???????????。???????.NET Framework 4.0????????。Vincent: Test projectWPF Table View: WPF DataGrid replacement. Simple WPF control to display a table of data with improved performance. Developed in C#.

  Read the article

• Another Marketing Conference, part one – the best morning sessions.

  - by Roger Hart

  Yesterday I went to Another Marketing Conference. I honestly can’t tell if the title is just tipping over into smug, but in the balance of things that doesn’t matter, because it was a good conference. There was an enjoyable blend of theoretical and practical, and enough inter-disciplinary spread to keep my inner dilettante grinning from ear to ear. Sure, there was a bumpy bit in the middle, with two back-to-back sales pitches and a rather thin overview of the state of the web. But the signal:noise ratio at AMC2012 was impressively high. Here’s the first part of my write-up of the sessions. It’s a bit of a mammoth. It’s also a bit of a mash-up of what was said and what I thought about it. I’ll add links to the videos and slides from the sessions as they become available. Although it was in the morning session, I’ve not included Vanessa Northam’s session on the power of internal comms to build brand ambassadors. It’ll be in the next roundup, as this is already pushing 2.5k words. First, the important stuff. I was keeping a tally, and nobody said “synergy” or “leverage”. I did, however, hear the term “marketeers” six times. Shame on you – you know who you are. 1 – Branding in a post-digital world, Graham Hales This initially looked like being a sales presentation for Interbrand, but Graham pulled it out of the bag a few minutes in. He introduced a model for brand management that was essentially Plan >> Do >> Check >> Act, with Do and Check rolled up together, and went on to stress that this looks like on overall business management model for a reason. Brand has to be part of your overall business strategy and metrics if you’re going to care about it at all. This was the first iteration of what proved to be one of the event’s emergent themes: do it throughout the stack or don’t bother. Graham went on to remind us that brands, in so far as they are owned at all, are owned by and co-created with our customers. Advertising can offer a message to customers, but they provide the expression of a brand. This was a preface to talking about an increasingly chaotic marketplace, with increasingly hard-to-manage purchase processes. Services like Amazon reviews and TripAdvisor (four presenters would make this point) saturate customers with information, and give them a kind of vigilante power to comment on and define brands. Consequentially, they experience a number of “moments of deflection” in our sales funnels. Our control is lessened, and failure to engage can negatively-impact buying decisions increasingly poorly. The clearest example given was the failure of NatWest’s “caring bank” campaign, where staff in branches, customer support, and online presences didn’t align. A discontinuity of experience basically made the campaign worthless, and disgruntled customers talked about it loudly on social media. This in turn presented an opportunity to engage and show caring, but that wasn’t taken. What I took away was that brand (co)creation is ongoing and needs monitoring and metrics. But reciprocally, given you get what you measure, strategy and metrics must include brand if any kind of branding is to work at all. Campaigns and messages must permeate product and service design. What that doesn’t mean (and Graham didn’t say it did) is putting Marketing at the top of the pyramid, and having them bawl demands at Product Management, Support, and Development like an entitled toddler. It’s going to have to be collaborative, and session 6 on internal comms handled this really well. The main thing missing here was substantiating data, and the main question I found myself chewing on was: if we’re building brands collaboratively and in the open, what about the cultural politics of trolling? 2 – Challenging our core beliefs about human behaviour, Mark Earls This was definitely the best show of the day. It was also some of the best content. Mark talked us through nudging, behavioural economics, and some key misconceptions around decision making. Basically, people aren’t rational, they’re petty, reactive, emotional sacks of meat, and they’ll go where they’re led. Comforting stuff. Examples given were the spread of the London Riots and the “discovery” of the mountains of Kong, and the popularity of Susan Boyle, which, in turn made me think about Per Mollerup’s concept of “social wayshowing”. Mark boiled his thoughts down into four key points which I completely failed to write down word for word: People do, then think – Changing minds to change behaviour doesn’t work. Post-rationalization rules the day. See also: mere exposure effects. Spock < Kirk - Emotional/intuitive comes first, then we rationalize impulses. The non-thinking, emotive, reactive processes run much faster than the deliberative ones. People are not really rational decision makers, so  intervening with information may not be appropriate. Maximisers or satisficers? – Related to the last point. People do not consistently, rationally, maximise. When faced with an abundance of choice, they prefer to satisfice than evaluate, and will often follow social leads rather than think. Things tend to converge – Behaviour trends to a consensus normal. When faced with choices people overwhelmingly just do what they see others doing. Humans are extraordinarily good at mirroring behaviours and receiving influence. People “outsource the cognitive load” of choices to the crowd. Mark’s headline quote was probably “the real influence happens at the table next to you”. Reference examples, word of mouth, and social influence are tremendously important, and so talking about product experiences may be more important than talking about products. This reminded me of Kathy Sierra’s “creating bad-ass users” concept of designing to make people more awesome rather than products they like. If we can expose user-awesome, and make sharing easy, we can normalise the behaviours we want. If we normalize the behaviours we want, people should make and post-rationalize the buying decisions we want.  Where we need to be: “A bigger boy made me do it” Where we are: “a wizard did it and ran away” However, it’s worth bearing in mind that some purchasing decisions are personal and informed rather than social and reactive. There’s a quadrant diagram, in fact. What was really interesting, though, towards the end of the talk, was some advice for working out how social your products might be. The standard technology adoption lifecycle graph is essentially about social product diffusion. So this idea isn’t really new. Geoffrey Moore’s “chasm” idea may not strictly apply. However, his concepts of beachheads and reference segments are exactly what is required to normalize and thus enable purchase decisions (behaviour change). The final thing is that in only very few categories does a better product actually affect purchase decision. Where the choice is personal and informed, this is true. But where it’s personal and impulsive, or in any way social, “better” is trumped by popularity, endorsement, or “point of sale salience”. UX, UCD, and e-commerce know this to be true. A better (and easier) experience will always beat “more features”. Easy to use, and easy to observe being used will beat “what the user says they want”. This made me think about the astounding stickiness of rational fallacies, “common sense” and the pathological willful simplifications of the media. Rational fallacies seem like they’re basically the heuristics we use for post-rationalization. If I were profoundly grimy and cynical, I’d suggest deploying a boat-load in our messaging, to see if they’re really as sticky and appealing as they look. 4 – Changing behaviour through communication, Stephen Donajgrodzki This was a fantastic follow up to Mark’s session. Stephen basically talked us through some tactics used in public information/health comms that implement the kind of behavioural theory Mark introduced. The session was largely about how to get people to do (good) things they’re predisposed not to do, and how communication can (and can’t) make positive interventions. A couple of things stood out, in particular “implementation intentions” and how they can be linked to goals. For example, in order to get people to check and test their smoke alarms (a goal intention, rarely actualized  an information campaign will attempt to link this activity to the clocks going back or forward (a strong implementation intention, well-actualized). The talk reinforced the idea that making behaviour changes easy and visible normalizes them and makes them more likely to succeed. To do this, they have to be embodied throughout a product and service cycle. Experiential disconnects undermine the normalization. So campaigns, products, and customer interactions must be aligned. This is underscored by the second section of the presentation, which talked about interventions and pre-conditions for change. Taking the examples of drug addiction and stopping smoking, Stephen showed us a framework for attempting (and succeeding or failing in) behaviour change. He noted that when the change is something people fundamentally want to do, and that is easy, this gets a to simpler. Coordinated, easily-observed environmental pressures create preconditions for change and build motivation. (price, pub smoking ban, ad campaigns, friend quitting, declining social acceptability) A triggering even leads to a change attempt. (getting a cold and panicking about how bad the cough is) Interventions can be made to enable an attempt (NHS services, public information, nicotine patches) If it succeeds – yay. If it fails, there’s strong negative enforcement. Triggering events seem largely personal, but messaging can intervene in the creation of preconditions and in supporting decisions. Stephen talked more about systems of thinking and “bounded rationality”. The idea being that to enable change you need to break through “automatic” thinking into “reflective” thinking. Disruption and emotion are great tools for this, but that is only the start of the process. It occurs to me that a great deal of market research is focused on determining triggers rather than analysing necessary preconditions. Although they are presumably related. The final section talked about setting goals. Marketing goals are often seen as deriving directly from business goals. However, marketing may be unable to deliver on these directly where decision and behaviour-change processes are involved. In those cases, marketing and communication goals should be to create preconditions. They should also consider priming and norms. Content marketing and brand awareness are good first steps here, as brands can be heuristics in decision making for choice-saturated consumers, or those seeking education. 5 – The power of engaged communities and how to build them, Harriet Minter (the Guardian) The meat of this was that you need to let communities define and establish themselves, and be quick to react to their needs. Harriet had been in charge of building the Guardian’s community sites, and learned a lot about how they come together, stabilize  grow, and react. Crucially, they can’t be about sales or push messaging. A community is not just an audience. It’s essential to start with what this particular segment or tribe are interested in, then what they want to hear. Eventually you can consider – in light of this – what they might want to buy, but you can’t start with the product. A community won’t cohere around one you’re pushing. Her tips for community building were (again, sorry, not verbatim): Set goals Have some targets. Community building sounds vague and fluffy, but you can have (and adjust) concrete goals. Think like a start-up This is the “lean” stuff. Try things, fail quickly, respond. Don’t restrict platforms Let the audience choose them, and be aware of their differences. For example, LinkedIn is very different to Twitter. Track your stats Related to the first point. Keeping an eye on the numbers lets you respond. They should be qualified, however. If you want a community of enterprise decision makers, headcount alone may be a bad metric – have you got CIOs, or just people who want to get jobs by mingling with CIOs? Build brand advocates Do things to involve people and make them awesome, and they’ll cheer-lead for you. The last part really got my attention. Little bits of drive-by kindness go a long way. But more than that, genuinely helping people turns them into powerful advocates. Harriet gave an example of the Guardian engaging with an aspiring journalist on its Q&A forums. Through a series of serendipitous encounters he became a BBC producer, and now enthusiastically speaks up for the Guardian community sites. Cultivating many small, authentic, influential voices may have a better pay-off than schmoozing the big guys. This could be particularly important in the context of Mark and Stephen’s models of social, endorsement-led, and example-led decision making. There’s a lot here I haven’t covered, and it may be worth some follow-up on community building. Thoughts I was quite sceptical of nudge theory and behavioural economics. First off it sounds too good to be true, and second it sounds too sinister to permit. But I haven’t done the background reading. So I’m going to, and if it seems to hold real water, and if it’s possible to do it ethically (Stephen’s presentations suggests it may be) then it’s probably worth exploring. The message seemed to be: change what people do, and they’ll work out why afterwards. Moreover, the people around them will do it too. Make the things you want them to do extraordinarily easy and very, very visible. Normalize and support the decisions you want them to make, and they’ll make them. In practice this means not talking about the thing, but showing the user-awesome. Glib? Perhaps. But it feels worth considering. Also, if I ever run a marketing conference, I’m going to ban speakers from using examples from Apple. Quite apart from not being consistently generalizable, it’s becoming an irritating cliché.

  Read the article

• MERGE Bug with Filtered Indexes

  - by Paul White

  A MERGE statement can fail, and incorrectly report a unique key violation when: The target table uses a unique filtered index; and No key column of the filtered index is updated; and A column from the filtering condition is updated; and Transient key violations are possible Example Tables Say we have two tables, one that is the target of a MERGE statement, and another that contains updates to be applied to the target.  The target table contains three columns, an integer primary key, a single character alternate key, and a status code column.  A filtered unique index exists on the alternate key, but is only enforced where the status code is ‘a’: CREATE TABLE #Target ( pk integer NOT NULL, ak character(1) NOT NULL, status_code character(1) NOT NULL,   PRIMARY KEY (pk) );   CREATE UNIQUE INDEX uq1 ON #Target (ak) INCLUDE (status_code) WHERE status_code = 'a'; The changes table contains just an integer primary key (to identify the target row to change) and the new status code: CREATE TABLE #Changes ( pk integer NOT NULL, status_code character(1) NOT NULL,   PRIMARY KEY (pk) ); Sample Data The sample data for the example is: INSERT #Target (pk, ak, status_code) VALUES (1, 'A', 'a'), (2, 'B', 'a'), (3, 'C', 'a'), (4, 'A', 'd');   INSERT #Changes (pk, status_code) VALUES (1, 'd'), (4, 'a');          Target                     Changes +-----------------------+    +------------------+ ¦ pk ¦ ak ¦ status_code ¦    ¦ pk ¦ status_code ¦ ¦----+----+-------------¦    ¦----+-------------¦ ¦  1 ¦ A  ¦ a           ¦    ¦  1 ¦ d           ¦ ¦  2 ¦ B  ¦ a           ¦    ¦  4 ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦    +------------------+ ¦  4 ¦ A  ¦ d           ¦ +-----------------------+ The target table’s alternate key (ak) column is unique, for rows where status_code = ‘a’.  Applying the changes to the target will change row 1 from status ‘a’ to status ‘d’, and row 4 from status ‘d’ to status ‘a’.  The result of applying all the changes will still satisfy the filtered unique index, because the ‘A’ in row 1 will be deleted from the index and the ‘A’ in row 4 will be added. Merge Test One Let’s now execute a MERGE statement to apply the changes: MERGE #Target AS t USING #Changes AS c ON c.pk = t.pk WHEN MATCHED AND c.status_code <> t.status_code THEN UPDATE SET status_code = c.status_code; The MERGE changes the two target rows as expected.  The updated target table now contains: +-----------------------+ ¦ pk ¦ ak ¦ status_code ¦ ¦----+----+-------------¦ ¦  1 ¦ A  ¦ d           ¦ <—changed from ‘a’ ¦  2 ¦ B  ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦ ¦  4 ¦ A  ¦ a           ¦ <—changed from ‘d’ +-----------------------+ Merge Test Two Now let’s repopulate the changes table to reverse the updates we just performed: TRUNCATE TABLE #Changes;   INSERT #Changes (pk, status_code) VALUES (1, 'a'), (4, 'd'); This will change row 1 back to status ‘a’ and row 4 back to status ‘d’.  As a reminder, the current state of the tables is:          Target                        Changes +-----------------------+    +------------------+ ¦ pk ¦ ak ¦ status_code ¦    ¦ pk ¦ status_code ¦ ¦----+----+-------------¦    ¦----+-------------¦ ¦  1 ¦ A  ¦ d           ¦    ¦  1 ¦ a           ¦ ¦  2 ¦ B  ¦ a           ¦    ¦  4 ¦ d           ¦ ¦  3 ¦ C  ¦ a           ¦    +------------------+ ¦  4 ¦ A  ¦ a           ¦ +-----------------------+ We execute the same MERGE statement: MERGE #Target AS t USING #Changes AS c ON c.pk = t.pk WHEN MATCHED AND c.status_code <> t.status_code THEN UPDATE SET status_code = c.status_code; However this time we receive the following message: Msg 2601, Level 14, State 1, Line 1 Cannot insert duplicate key row in object 'dbo.#Target' with unique index 'uq1'. The duplicate key value is (A). The statement has been terminated. Applying the changes using UPDATE Let’s now rewrite the MERGE to use UPDATE instead: UPDATE t SET status_code = c.status_code FROM #Target AS t JOIN #Changes AS c ON t.pk = c.pk WHERE c.status_code <> t.status_code; This query succeeds where the MERGE failed.  The two rows are updated as expected: +-----------------------+ ¦ pk ¦ ak ¦ status_code ¦ ¦----+----+-------------¦ ¦  1 ¦ A  ¦ a           ¦ <—changed back to ‘a’ ¦  2 ¦ B  ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦ ¦  4 ¦ A  ¦ d           ¦ <—changed back to ‘d’ +-----------------------+ What went wrong with the MERGE? In this test, the MERGE query execution happens to apply the changes in the order of the ‘pk’ column. In test one, this was not a problem: row 1 is removed from the unique filtered index by changing status_code from ‘a’ to ‘d’ before row 4 is added.  At no point does the table contain two rows where ak = ‘A’ and status_code = ‘a’. In test two, however, the first change was to change row 1 from status ‘d’ to status ‘a’.  This change means there would be two rows in the filtered unique index where ak = ‘A’ (both row 1 and row 4 meet the index filtering criteria ‘status_code = a’). The storage engine does not allow the query processor to violate a unique key (unless IGNORE_DUP_KEY is ON, but that is a different story, and doesn’t apply to MERGE in any case).  This strict rule applies regardless of the fact that if all changes were applied, there would be no unique key violation (row 4 would eventually be changed from ‘a’ to ‘d’, removing it from the filtered unique index, and resolving the key violation). Why it went wrong The query optimizer usually detects when this sort of temporary uniqueness violation could occur, and builds a plan that avoids the issue.  I wrote about this a couple of years ago in my post Beware Sneaky Reads with Unique Indexes (you can read more about the details on pages 495-497 of Microsoft SQL Server 2008 Internals or in Craig Freedman’s blog post on maintaining unique indexes).  To summarize though, the optimizer introduces Split, Filter, Sort, and Collapse operators into the query plan to: Split each row update into delete followed by an inserts Filter out rows that would not change the index (due to the filter on the index, or a non-updating update) Sort the resulting stream by index key, with deletes before inserts Collapse delete/insert pairs on the same index key back into an update The effect of all this is that only net changes are applied to an index (as one or more insert, update, and/or delete operations).  In this case, the net effect is a single update of the filtered unique index: changing the row for ak = ‘A’ from pk = 4 to pk = 1.  In case that is less than 100% clear, let’s look at the operation in test two again:          Target                     Changes                   Result +-----------------------+    +------------------+    +-----------------------+ ¦ pk ¦ ak ¦ status_code ¦    ¦ pk ¦ status_code ¦    ¦ pk ¦ ak ¦ status_code ¦ ¦----+----+-------------¦    ¦----+-------------¦    ¦----+----+-------------¦ ¦  1 ¦ A  ¦ d           ¦    ¦  1 ¦ d           ¦    ¦  1 ¦ A  ¦ a           ¦ ¦  2 ¦ B  ¦ a           ¦    ¦  4 ¦ a           ¦    ¦  2 ¦ B  ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦    +------------------+    ¦  3 ¦ C  ¦ a           ¦ ¦  4 ¦ A  ¦ a           ¦                            ¦  4 ¦ A  ¦ d           ¦ +-----------------------+                            +-----------------------+ From the filtered index’s point of view (filtered for status_code = ‘a’ and shown in nonclustered index key order) the overall effect of the query is:   Before           After +---------+    +---------+ ¦ pk ¦ ak ¦    ¦ pk ¦ ak ¦ ¦----+----¦    ¦----+----¦ ¦  4 ¦ A  ¦    ¦  1 ¦ A  ¦ ¦  2 ¦ B  ¦    ¦  2 ¦ B  ¦ ¦  3 ¦ C  ¦    ¦  3 ¦ C  ¦ +---------+    +---------+ The single net change there is a change of pk from 4 to 1 for the nonclustered index entry ak = ‘A’.  This is the magic performed by the split, sort, and collapse.  Notice in particular how the original changes to the index key (on the ‘ak’ column) have been transformed into an update of a non-key column (pk is included in the nonclustered index).  By not updating any nonclustered index keys, we are guaranteed to avoid transient key violations. The Execution Plans The estimated MERGE execution plan that produces the incorrect key-violation error looks like this (click to enlarge in a new window): The successful UPDATE execution plan is (click to enlarge in a new window): The MERGE execution plan is a narrow (per-row) update.  The single Clustered Index Merge operator maintains both the clustered index and the filtered nonclustered index.  The UPDATE plan is a wide (per-index) update.  The clustered index is maintained first, then the Split, Filter, Sort, Collapse sequence is applied before the nonclustered index is separately maintained. There is always a wide update plan for any query that modifies the database. The narrow form is a performance optimization where the number of rows is expected to be relatively small, and is not available for all operations.  One of the operations that should disallow a narrow plan is maintaining a unique index where intermediate key violations could occur. Workarounds The MERGE can be made to work (producing a wide update plan with split, sort, and collapse) by: Adding all columns referenced in the filtered index’s WHERE clause to the index key (INCLUDE is not sufficient); or Executing the query with trace flag 8790 set e.g. OPTION (QUERYTRACEON 8790). Undocumented trace flag 8790 forces a wide update plan for any data-changing query (remember that a wide update plan is always possible).  Either change will produce a successfully-executing wide update plan for the MERGE that failed previously. Conclusion The optimizer fails to spot the possibility of transient unique key violations with MERGE under the conditions listed at the start of this post.  It incorrectly chooses a narrow plan for the MERGE, which cannot provide the protection of a split/sort/collapse sequence for the nonclustered index maintenance. The MERGE plan may fail at execution time depending on the order in which rows are processed, and the distribution of data in the database.  Worse, a previously solid MERGE query may suddenly start to fail unpredictably if a filtered unique index is added to the merge target table at any point. Connect bug filed here Tests performed on SQL Server 2012 SP1 CUI (build 11.0.3321) x64 Developer Edition © 2012 Paul White – All Rights Reserved Twitter: @SQL_Kiwi Email: [email protected]

  Read the article

• CodePlex Daily Summary for Tuesday, June 14, 2011

  CodePlex Daily Summary for Tuesday, June 14, 2011Popular ReleasesSizeOnDisk: 1.0.9.0: Can handle Right-To-Left languages (issue 316) About box (issue 310) New language: Deutsch (thanks to kyoka) Fix: file and folder context menuTerrariViewer: TerrariViewer v2.6: This is a temporary release so that people can edit their characters for the newest version of Terraria. It does not include the newest items or the ability to add social slot items. Those will come in TerrariViewer v3.0, which I am currently working on.DropBox Linker: DropBox Linker 1.1: Added different popup descriptions for actions (copy/append/update/remove) Added popup timeout control (with live preview) Added option to overwrite clipboard with the last link only Notification popup closes on user click Notification popup default timeout increased to 3 sec. Added codeplex link to about .NET Framework 4.0 Client Profile requiredMobile Device Detection and Redirection: 1.0.4.1: Stable Release 51 Degrees.mobi Foundation is the best way to detect and redirect mobile devices and their capabilities on ASP.NET and is being used on thousands of websites worldwide. We’re highly confident in our software and we recommend all users update to this version. Changes to Version 1.0.4.1Changed the BlackberryHandler and BlackberryVersion6Handler to have equal CONFIDENCE values to ensure they both get a chance at detecting BlackBerry version 4&5 and version 6 devices. Prior to thi...Kouak - HTTP File Share Server: Kouak Beta 3 - Clean: Some critical bug solved and dependecy problems There's 3 package : - The first, contains the cli server and the graphical server. - The second, only the cli server - The third, only the graphical client. It's a beta release, so don't hesitate to emmit issue ;pRawr: Rawr 4.1.06: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta6: ??AcDown?????????????，?????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta6 ?????(imanhua.com)????? ???? ?? ??"????","?????","?????","????"?????? "????"?????"????????"?? ??????????? ?????????????? ?????????????/???? ?? ????Windows 7???????????? ????????? ?? ????????????? ???????/??????????? ???????????? ?? ?? ?????(imanh...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.22: Added lots of optimizations related to expression optimization. Combining adjacent expression statements into a single statement means more if-, for-, and while-statements can get rid of the curly-braces. Then more if-statements can be converted to expressions, and more expressions can be combined with return- and for-statements. Moving functions to the top of their scopes, followed by var-statements, provides more opportunities for expression-combination. Added command-line option to remove ...Pulse: Pulse Beta 2: - Added new wallpapers provider http://wallbase.cc. Supports english search, multiple keywords* - Improved font rendering in Options window - Added "Set wallpaper as logon background" option* - Fixed crashes if there is no internet connection - Fixed: Rewalls downloads empty images sometimes - Added filters* Note 1: wallbase provider supports only english search. Rewalls provider supports only russian search but Pulse automatically translates your english keyword into russian using Google Tr...???? (Internet Go Game for Android): goapp.3.0.apk: Refresh UI and bugfixPhalanger - The PHP Language Compiler for the .NET Framework: 2.1 (June 2011) for .NET 4.0: Release of Phalanger 2.1 - the opensource PHP compiler for .NET framework 4.0. Installation package also includes basic version of Phalanger Tools for Visual Studio 2010. This allows you to easily create, build and debug Phalanger web or application inside this ultimate integrated development environment. You can even install the tools into the free Visual Studio 2010 Shell (Integrated). To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phala...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.7: Version: 2.0.0.7 (Milestone 7): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...SimplePlanner: v2.0b: For 2011-2012 Sem 1 ???2011-2012 ????Visual Studio 2010 Help Downloader: 1.0.0.3: Domain name support for proxy Cleanup old packages bug Writing to EventLog with UAC enabled bug Small fixes & Refactoring32feet.NET: 3.2: 32feet.NET v3.2 - Personal Area Networking for .NET Build 3.2.0609.0 9th June 2011 This library provides a .NET networking API for devices and desktop computers running the Microsoft or Broadcom/Widcomm Bluetooth stacks, Microsoft Windows supported IrDA devices and associated Object Exchange (OBEX) services for both these mediums. Online documentation is integrated into your Visual Studio help. The object model has been designed to promote consistency between Bluetooth, IrDA and traditional ...Media Companion: MC 3.406b weekly: With this version change a movie rebuild is required when first run -else MC will lock up on exit. Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. Refer to the documentation on this site for the Installation & Setup Guide Important! If you find MC not displaying movie data properly, please try a 'movie rebuild' to reload the data from the nfo's into MC's cache. Fixes Movies Readded movie preference to rename invalid or scene nfo's to info ext...Windows Azure VM Assistant: AzureVMAssist V1.0.0.5: AzureVMAssist V1.0.0.5 (Debug) - Test Release VersionNetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9: Changes: - fix examples (include issue 16026) - add new examples - 32Bit/64Bit Walkthrough is now available in technical Documentation. Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...Reusable Library: V1.1.3: A collection of reusable abstractions for enterprise application developerVidCoder: 0.9.2: Updated to HandBrake 4024svn. This fixes problems with mpeg2 sources: corrupted previews, incorrect progress indicators and encodes that incorrectly report as failed. Fixed a problem that prevented target sizes above 2048 MB.New ProjectsASP.NET MVC / Windows Workflow Foundation Integration: This project will product libraries, activities and examples that demonstrate how you can use Windows Workflow Foundation with ASP.NET MVCBing Maps Spatial Data Service Loader: Bing Maps Spatial Data Service Loader is a simple tool that helps you to load your set of data (CSV) into the Spatial Data Service included in Bing Maps licensing.Blend filter and Pencil sketch effect in C#: This project contains a filter for blending one image over an other using effects like Color Dodge, Lighten, Darken, Difference, etc. And an example of how to use that to do a Pencil Sketch effect in C# using AForge frameworkBugStoryV2: student project !CAIXA LOTERIAS: Projeto destinado a integrar resultado dos sorteios da Caixa em VB.NET, C#, ASP.NETCSReports: Report authoring tool. It supports dinamyc grouping, scripting formulas in vbscript, images from db and sub-sections. The report definition is saved to file in xml format and can be exported to pdf, doc and xls format.EasyLibrary: EasyLibraryFreetime Development Platform: Freetime Development Platform is a set of reusable design used to develop Web and Desktop based applications. IISProcessScheduler: Schedule processes from within IIS.LitleChef: LitleChefLLBLGen ANGTE (ASP.Net GUI Templates Extended): LLBLGen ANGTE (ASP.Net GUI Templates Extended) makes possible to use LLBLGen template system to generate a reasonable ASP.Net GUI that you can use as the base of your project or just as a prototyping tool. It generates APS.Net code with C# as code behind using .Net 2.0Memory: Memory Game for AndroidNCU - Book store: Educational project for a software engineering bootcamp at Northern Caribbean UniversityOrderToList Extension for IEnumerable: An extension method for IEnumerable<T> that will sort the IEnumerable based on a list of keys. Suppose you have a list of IDs {10, 5, 12} and want to use LINQ to retrieve all People from the DB with those IDs in that order, you want this extension. Sort is binary so it's fastp301: Old project.Pang: A new pong rip off; including some power ups. Will be written in C# using XNA.Ring2Park Online: Ring2Park is a fully working ASP.NET reference application that simulates the online purchase and management of Vehicle Parking sessions. It is developed using the latest ASP.NET MVC 3 patterns and capabilities. It includes a complete set of Application Lifecycle Management (ALM) assets, including requirements, test and deployment.rITIko: Questo progetto è stato creato come esperimento dalla classe 4G dell'ITIS B. Pascal di Cesena. Serve (per ora) solo per testate il funzionamento di CodePlex e del sistema SVN. Forse un giorno conterrà qualcosa di buono, rimanete aggiornati.Rug.Cmd - Command Line Parser and Console Application Framework: Rugland Console Framework is a collection of classes to enable the fast and consistent development of .NET console applications. Parse command line arguments and write your applications usage. If you are developing command line or build process tools in .NET then this maybe the lightweight framework for you. It is developed in C#.SamaToursUSA: sama tours usaSamcrypt: .Security System: With this program you will be able to secure your screen from prying eyes. In fact as soon as the block will not be unlocked only with your password. Perfect for when you go to have a coffee in the break. :)Sharp Temperature Conversor: Sharp Temperature Conversor has the objective of providing a easy, fast and a direct way to convert temperatures from one type to another. The project is small, uses C#, Visual Studio 2010. The project is small. However, the growth is possible. Silverlight Star Rating Control: A simple star rating control for editing or displaying ratings in Silverlight. Supports half-filled stars. Includes the star shape as a separate control.Silverware: Silverware is a set of libraries to enhance and make application development in Silverlight easier.Simple & lightweight fluent interface for Design by Contract: This project try to focus on make a good quality code for your project. It try to make sure all instance and variables must be satisfy some conditions in Design by Contract.SimpleAspect: A simple Aspect library for PostSharpTespih: Basit tespih uygulamasi. Kendi evrad u ezkar listenizi olusturup seçtiginiz bir evrat üzerinden tespih çekebilirsiniz.Texticize: Texticize is a fast, extensible, and intuitive object-to-text template engine for .NET. You can use Texticize to quickly create dynamic e-mails, letters, source code, or any other text documents using predefined text templates substituting placeholders with properties of CLR objects in realtime.The Dragon riders: a mmorgh game with free play in creaction. FantasyWPF ObservableCollection: WPF ObservableCollection Idle use.X9.37 Image Cash Letter file viewer: x9.37 Image Cash Letter viewer. Developed using VB.Net. Currently allows viewing and searching of X9 files. The code also has image manipulation code, specifically multi page TIF file handling that you might find useful,

  Read the article

• CodePlex Daily Summary for Thursday, March 17, 2011

  CodePlex Daily Summary for Thursday, March 17, 2011Popular ReleasesLeage of Legends Masteries Tool: LoLMasterSave_v1.6.1.274: -Addresses resent LoL update that interfered with the way MasterSave sets / reads masteries - Removed Shift windows since some people experiencing issues If your interested in this function i can provide it as small separate tool.ASP.NET Comet Ajax Library (Reverse Ajax - Server Push): ASP.NET Server Push Samples: This package contains 14 sample projects.LogExpert: 1.4 build 4092: TabControl: Tooltip on dropdown list shows full path names now New menu item "Lock instance" in Options menu. Only available when "Allow only one instance" is disabled in the settings. "Lock instance" will temporary enable the single instance mode. The locked instance will receive all new launched files Some NullPtrExceptions fixed (e.g. in the settings dialog) Note: The debug build is identical to the release build. But the debug version writes a log file. It also contains line numbers ...Facebook C# SDK: 5.0.6 (BETA): This is seventh BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. New in this release: Version 5.0.6 is almost completely backward compatible with 4.2.1 and 5.0.3 (BETA) Bug fixes and helpers to simplify many common scenarios For more information about this release see the following blog posts: F...SQLCE Code Generator: Build 1.0.3: New beta of the SQLCE Code Generator. New features: - Generates an IDataRepository interface that contains the generated repository interfaces that represents each table - Visual Studio 2010 Custom Tool Support Custom Tool: The custom tool is called SQLCECodeGenerator. Write this in the Custom Tool field in the Properties Window of an SDF file included in your project, this should create a code-behind file for the generated data access codeDotNetNuke® Community Edition: 06.00.00 CTP: CTP 1 (Build 155) is firmly focused around our conversion to C#. As many people have noted, this is a significant change to the platform and affects all areas of the product. This is one of the driving factors in why we felt it was important to get this release into your hands as soon as possible. We have already done quite a bit of testing on this feature internally and have fixed a number of issues in this area. We also recognize that there are probably still some more bugs to be found ...Kooboo CMS: Kooboo 3.0 RC: Bug fixes Inline editing toolbar positioning for websites with complicate CSS. Inline editing is turned on by default now for the samplesite template. MongoDB version content query for multiple filters. . Add a new 404 page to guide users to login and create first website. Naming validation for page name and datarule name. Files in this download kooboo_CMS.zip: The Kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL,SQLCE, RavenDB ...SQL Monitor - tracking sql server activities: SQL Monitor 3.2: 1. introduce sql color syntax highlighting with http://www.codeproject.com/KB/edit/FastColoredTextBox_.aspxUmbraco CMS: Umbraco 4.7.0: Service release fixing 50+ issues! Getting Started A great place to start is with our Getting Started Guide: Getting Started Guide: http://umbraco.codeplex.com/Project/Download/FileDownload.aspx?DownloadId=197051 Make sure to check the free foundation videos on how to get started building Umbraco sites. They're available from: Introduction for webmasters: http://umbraco.tv/help-and-support/video-tutorials/getting-started Understand the Umbraco concepts: http://umbraco.tv/help-and-support...ProDinner - ASP.NET MVC EF4 Code First DDD jQuery Sample App: first release: ProDinner is an ASP.NET MVC sample application, it uses DDD, EF4 Code First for Data Access, jQuery and MvcProjectAwesome for Web UI, it has Multi-language User Interface Features: CRUD and search operations for entities Multi-Language User Interface upload and crop Images (make thumbnail) for meals pagination using "more results" button very rich and responsive UI (using Mvc Project Awesome) Multiple UI themes (using jQuery UI themes)BEPUphysics: BEPUphysics v0.15.1: Latest binary release. Version HistoryIronRuby: 1.1.3: IronRuby 1.1.3 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. The main purpose of this release is to sync with IronPython 2.7 release, i.e. to keep the Dynamic Language Runtime that both these languages build on top shareable. This release also fixes a few bugs: 5763 Use...SQL Server PowerShell Extensions: 2.3.2.1 Production: Release 2.3.2.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 13 modules with 163 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler, Oracle and MySQL and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.IronPython: 2.7: On behalf of the IronPython team, I'm very pleased to announce the release of IronPython 2.7. This release contains all of the language features of Python 2.7, as well as several previously missing modules and numerous bug fixes. IronPython 2.7 also includes built-in Visual Studio support through IronPython Tools for Visual Studio. IronPython 2.7 requires .NET 4.0 or Silverlight 4. To download IronPython 2.7, visit http://ironpython.codeplex.com/releases/view/54498. Any bugs should be report...XML Explorer: XML Explorer 4.0.2: Changes in 4.0: This release is built on the Microsoft .NET Framework 4 Client Profile. Changed XSD validation to use the schema specified by the XML documents. Added a VS style Error List, double-clicking an error takes you to the offending node. XPathNavigator schema validation finally gives SourceObject (was fixed in .NET 4). Added Namespaces window and better support for XPath expressions in documents with a default namespace. Added ExpandAll and CollapseAll toolbar buttons (in a...Mobile Device Detection and Redirection: 1.0.0.0: Stable Release 51 Degrees.mobi Foundation has been in beta for some time now and has been used on thousands of websites worldwide. We’re now highly confident in the product and have designated this release as stable. We recommend all users update to this version. New Capabilities MappingsTo improve compatibility with other libraries some new .NET capabilities are now populated with wurfl data: “maximumRenderedPageSize” populated with “max_deck_size” “rendersBreaksAfterWmlAnchor” populated ...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.3: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added interactive search for the lookupWPF Inspector: WPF Inspector 0.9.7: New Features in Version 0.9.7 - Support for .NET 3.5 and 4.0 - Multi-inspection of the same process - Property-Filtering for multiple keywords e.g. "Height Width" - Smart Element Selection - Select Controls by clicking CTRL, - Select Template-Parts by clicking CTRL+SHIFT - Possibility to hide the element adorner (over the context menu on the visual tree) - Many bugfixes??????????: All-In-One Code Framework ??? 2011-03-10: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??，????。??????????All-In-One Code Framework ???，??20?Sample！！????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ASP.NET ??： CSASPNETBingMaps VBASPNETRemoteUploadAndDownload CS/VBASPNETSerializeJsonString CSASPNETIPtoLocation CSASPNETExcelLikeGridView ....... Winform??： FTPDownload FTPUpload MultiThreadedWebDownloader...Rawr: Rawr 4.1.0: Note: This release may say 4.0.21 in the version bar. This is a typo and the version is actually 4.1.0, not to be confused with 4.0.10 which was released a while back. Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a Relea...New ProjectsAMWC: AMWCAny Repository Membership Provider: Any Repository Membership is about easing the writing of Custom Membership Providers for ASP.NET. With Any Repository Membership you will simply need Implement an interface with few methods to configure a Data Store. Conectors for SQL Server CE, Azure and MySql Planned.Award Citation Helper: This simple Silverlight application demonstrates key concepts including using isolated storage, Silverlight to HTML communications, observable collections and context menus. It is also useful as a tool for creating award citations for your own use or on the BrainyAwards.com site.Azure Storage Backup: Provides a backup and restore function for a Windows Azure storage account, including Table Storage and Blob Storage.Babil: Babil is aimed to be an open source web based portal for software localization. It will support importing and exporting different formats such as .resx files and GNU gettext. Another goal is to have some basic project management features for managing translators and changes. BuildExplorer: Analyze a TFS2010 build whether it is finished, hanging or in progress.DHM17438: DHM17438Flowmarks Events: Data entry tool for simple time series.Go to Browser - Visual Studio 2010 Extension: This is a visual studio 2010 extension, that goes to a web browser on your repository. In order to specify the url format, you have to go solution context menu > "Go to Browser...". It is also available through Visual Studio Gallery. (Comming soon)Hierarchical State Machine Compiler: This projects helps you to easily create and generate hierarchical state machine in .NET. State, transitions, conditions, action, state inheritance Silverlight generation MVVM support iLBC.NET: A port of the iLBC (internet Low Bitrate Codec) speech codec for .NET platform.JAMBE: Simple test project for JA-BulgariaSAY IT WITH CSS! Slide Show implemented as pure CSS3 / HTML 5 solution: The solution demonstrates CSS3 coding technique, which allows to implement online slide show with "darkbox" (or "lightbox") effects using pure CSS3 and HTML5; it does not require any Javascript/jQuery coding.SharePoint Test Data Tool: This project is basically a small window based application to be able to quickly populate items in a list/library. This can be helpful while testing your code bits ( WP's etc ) Shiros: Una idea que empezó en un Japo de Seattle.TwitterOnSQLAzure: Twitter Parser used for 24 Hours of SQL Pass presentation March 2011. Pulls and parses tweet stream, based on parameters, builds database (locally). All features compliant with SQL Azure. Use SQL Azure migration wizard to move data / schema to cloud - or chg conn stringVisio Forward Engineer Addin: Somehow Microsoft decided not to include this feature in 2010 version of Visio. Visio Forward Engineer Addin for Visio 2010, adds the ability to generate the database scripts directly from the database model defined in Visio 2010. It is developed in C#.Winwise Surface & Tablet AR Drone: This is the Surface & Tablet client to pilot a Parrot AR Drone.WNY: Online gaming system that support multiple usersWow Project: Wow Project is a tool for wow users to easy manage quests and items. It's writen in VB.NET or C#

  Read the article

• Inside the Concurrent Collections: ConcurrentDictionary

  - by Simon Cooper

  Using locks to implement a thread-safe collection is rather like using a sledgehammer - unsubtle, easy to understand, and tends to make any other tool redundant. Unlike the previous two collections I looked at, ConcurrentStack and ConcurrentQueue, ConcurrentDictionary uses locks quite heavily. However, it is careful to wield locks only where necessary to ensure that concurrency is maximised. This will, by necessity, be a higher-level look than my other posts in this series, as there is quite a lot of code and logic in ConcurrentDictionary. Therefore, I do recommend that you have ConcurrentDictionary open in a decompiler to have a look at all the details that I skip over. The problem with locks There's several things to bear in mind when using locks, as encapsulated by the lock keyword in C# and the System.Threading.Monitor class in .NET (if you're unsure as to what lock does in C#, I briefly covered it in my first post in the series): Locks block threads The most obvious problem is that threads waiting on a lock can't do any work at all. No preparatory work, no 'optimistic' work like in ConcurrentQueue and ConcurrentStack, nothing. It sits there, waiting to be unblocked. This is bad if you're trying to maximise concurrency. Locks are slow Whereas most of the methods on the Interlocked class can be compiled down to a single CPU instruction, ensuring atomicity at the hardware level, taking out a lock requires some heavy lifting by the CLR and the operating system. There's quite a bit of work required to take out a lock, block other threads, and wake them up again. If locks are used heavily, this impacts performance. Deadlocks When using locks there's always the possibility of a deadlock - two threads, each holding a lock, each trying to aquire the other's lock. Fortunately, this can be avoided with careful programming and structured lock-taking, as we'll see. So, it's important to minimise where locks are used to maximise the concurrency and performance of the collection. Implementation As you might expect, ConcurrentDictionary is similar in basic implementation to the non-concurrent Dictionary, which I studied in a previous post. I'll be using some concepts introduced there, so I recommend you have a quick read of it. So, if you were implementing a thread-safe dictionary, what would you do? The naive implementation is to simply have a single lock around all methods accessing the dictionary. This would work, but doesn't allow much concurrency. Fortunately, the bucketing used by Dictionary allows a simple but effective improvement to this - one lock per bucket. This allows different threads modifying different buckets to do so in parallel. Any thread making changes to the contents of a bucket takes the lock for that bucket, ensuring those changes are thread-safe. The method that maps each bucket to a lock is the GetBucketAndLockNo method: private void GetBucketAndLockNo( int hashcode, out int bucketNo, out int lockNo, int bucketCount) { // the bucket number is the hashcode (without the initial sign bit) // modulo the number of buckets bucketNo = (hashcode & 0x7fffffff) % bucketCount; // and the lock number is the bucket number modulo the number of locks lockNo = bucketNo % m_locks.Length; } However, this does require some changes to how the buckets are implemented. The 'implicit' linked list within a single backing array used by the non-concurrent Dictionary adds a dependency between separate buckets, as every bucket uses the same backing array. Instead, ConcurrentDictionary uses a strict linked list on each bucket: This ensures that each bucket is entirely separate from all other buckets; adding or removing an item from a bucket is independent to any changes to other buckets. Modifying the dictionary All the operations on the dictionary follow the same basic pattern: void AlterBucket(TKey key, ...) { int bucketNo, lockNo; 1: GetBucketAndLockNo( key.GetHashCode(), out bucketNo, out lockNo, m_buckets.Length); 2: lock (m_locks[lockNo]) { 3: Node headNode = m_buckets[bucketNo]; 4: Mutate the node linked list as appropriate } } For example, when adding another entry to the dictionary, you would iterate through the linked list to check whether the key exists already, and add the new entry as the head node. When removing items, you would find the entry to remove (if it exists), and remove the node from the linked list. Adding, updating, and removing items all follow this pattern. Performance issues There is a problem we have to address at this point. If the number of buckets in the dictionary is fixed in the constructor, then the performance will degrade from O(1) to O(n) when a large number of items are added to the dictionary. As more and more items get added to the linked lists in each bucket, the lookup operations will spend most of their time traversing a linear linked list. To fix this, the buckets array has to be resized once the number of items in each bucket has gone over a certain limit. (In ConcurrentDictionary this limit is when the size of the largest bucket is greater than the number of buckets for each lock. This check is done at the end of the TryAddInternal method.) Resizing the bucket array and re-hashing everything affects every bucket in the collection. Therefore, this operation needs to take out every lock in the collection. Taking out mutiple locks at once inevitably summons the spectre of the deadlock; two threads each hold a lock, and each trying to acquire the other lock. How can we eliminate this? Simple - ensure that threads never try to 'swap' locks in this fashion. When taking out multiple locks, always take them out in the same order, and always take out all the locks you need before starting to release them. In ConcurrentDictionary, this is controlled by the AcquireLocks, AcquireAllLocks and ReleaseLocks methods. Locks are always taken out and released in the order they are in the m_locks array, and locks are all released right at the end of the method in a finally block. At this point, it's worth pointing out that the locks array is never re-assigned, even when the buckets array is increased in size. The number of locks is fixed in the constructor by the concurrencyLevel parameter. This simplifies programming the locks; you don't have to check if the locks array has changed or been re-assigned before taking out a lock object. And you can be sure that when a thread takes out a lock, another thread isn't going to re-assign the lock array. This would create a new series of lock objects, thus allowing another thread to ignore the existing locks (and any threads controlling them), breaking thread-safety. Consequences of growing the array Just because we're using locks doesn't mean that race conditions aren't a problem. We can see this by looking at the GrowTable method. The operation of this method can be boiled down to: private void GrowTable(Node[] buckets) { try { 1: Acquire first lock in the locks array // this causes any other thread trying to take out // all the locks to block because the first lock in the array // is always the one taken out first // check if another thread has already resized the buckets array // while we were waiting to acquire the first lock 2: if (buckets != m_buckets) return; 3: Calculate the new size of the backing array 4: Node[] array = new array[size]; 5: Acquire all the remaining locks 6: Re-hash the contents of the existing buckets into array 7: m_buckets = array; } finally { 8: Release all locks } } As you can see, there's already a check for a race condition at step 2, for the case when the GrowTable method is called twice in quick succession on two separate threads. One will successfully resize the buckets array (blocking the second in the meantime), when the second thread is unblocked it'll see that the array has already been resized & exit without doing anything. There is another case we need to consider; looking back at the AlterBucket method above, consider the following situation: Thread 1 calls AlterBucket; step 1 is executed to get the bucket and lock numbers. Thread 2 calls GrowTable and executes steps 1-5; thread 1 is blocked when it tries to take out the lock in step 2. Thread 2 re-hashes everything, re-assigns the buckets array, and releases all the locks (steps 6-8). Thread 1 is unblocked and continues executing, but the calculated bucket and lock numbers are no longer valid. Between calculating the correct bucket and lock number and taking out the lock, another thread has changed where everything is. Not exactly thread-safe. Well, a similar problem was solved in ConcurrentStack and ConcurrentQueue by storing a local copy of the state, doing the necessary calculations, then checking if that state is still valid. We can use a similar idea here: void AlterBucket(TKey key, ...) { while (true) { Node[] buckets = m_buckets; int bucketNo, lockNo; GetBucketAndLockNo( key.GetHashCode(), out bucketNo, out lockNo, buckets.Length); lock (m_locks[lockNo]) { // if the state has changed, go back to the start if (buckets != m_buckets) continue; Node headNode = m_buckets[bucketNo]; Mutate the node linked list as appropriate } break; } } TryGetValue and GetEnumerator And so, finally, we get onto TryGetValue and GetEnumerator. I've left these to the end because, well, they don't actually use any locks. How can this be? Whenever you change a bucket, you need to take out the corresponding lock, yes? Indeed you do. However, it is important to note that TryGetValue and GetEnumerator don't actually change anything. Just as immutable objects are, by definition, thread-safe, read-only operations don't need to take out a lock because they don't change anything. All lockless methods can happily iterate through the buckets and linked lists without worrying about locking anything. However, this does put restrictions on how the other methods operate. Because there could be another thread in the middle of reading the dictionary at any time (even if a lock is taken out), the dictionary has to be in a valid state at all times. Every change to state has to be made visible to other threads in a single atomic operation (all relevant variables are marked volatile to help with this). This restriction ensures that whatever the reading threads are doing, they never read the dictionary in an invalid state (eg items that should be in the collection temporarily removed from the linked list, or reading a node that has had it's key & value removed before the node itself has been removed from the linked list). Fortunately, all the operations needed to change the dictionary can be done in that way. Bucket resizes are made visible when the new array is assigned back to the m_buckets variable. Any additions or modifications to a node are done by creating a new node, then splicing it into the existing list using a single variable assignment. Node removals are simply done by re-assigning the node's m_next pointer. Because the dictionary can be changed by another thread during execution of the lockless methods, the GetEnumerator method is liable to return dirty reads - changes made to the dictionary after GetEnumerator was called, but before the enumeration got to that point in the dictionary. It's worth listing at this point which methods are lockless, and which take out all the locks in the dictionary to ensure they get a consistent view of the dictionary: Lockless: TryGetValue GetEnumerator The indexer getter ContainsKey Takes out every lock (lockfull?): Count IsEmpty Keys Values CopyTo ToArray Concurrent principles That covers the overall implementation of ConcurrentDictionary. I haven't even begun to scratch the surface of this sophisticated collection. That I leave to you. However, we've looked at enough to be able to extract some useful principles for concurrent programming: Partitioning When using locks, the work is partitioned into independant chunks, each with its own lock. Each partition can then be modified concurrently to other partitions. Ordered lock-taking When a method does need to control the entire collection, locks are taken and released in a fixed order to prevent deadlocks. Lockless reads Read operations that don't care about dirty reads don't take out any lock; the rest of the collection is implemented so that any reading thread always has a consistent view of the collection. That leads us to the final collection in this little series - ConcurrentBag. Lacking a non-concurrent analogy, it is quite different to any other collection in the class libraries. Prepare your thinking hats!

  Read the article

• CodePlex Daily Summary for Tuesday, June 07, 2011

  CodePlex Daily Summary for Tuesday, June 07, 2011Popular ReleasesSCCM Client Actions Tool: SCCM Client Actions Tool v0.5: SCCM Client Actions Tool v0.5 is currently the most stable version and includes all of the functionality requested so far. It comes as a ZIP file that contains three files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively available starting from Windows Vista. Config.ini – A configuration file for default settings. This file is...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta5: ??AcDown?????????????，??????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta5 ?????????? ???? ?? ???????? ???"????????"?? ????????????? ????????/???? ?? ???"????"??? ?? ??????????? ?? ?? ??????????? ?? ?????????????????? ??????????????????? ???????????????? ????????????Discussions???????? ????AcDown??????????????VFPX: GoFish 4 Beta 1: Current beta is Build 144 (released 2011-06-07 ) See the GoFish4 info page for details and video link: http://vfpx.codeplex.com/wikipage?title=GoFishOnTopReplica: Release 3.3.2: Incremental update over 3.3 and 3.3.1. Added Polish language translation (thanks to Jan Romanczyk). Added German language translation (thanks to Eric Hoffmann). Fixed some localization issues.SQL Compact Query Analyzer: Build 0.3.0.0: Beta build of SQL Compact Query Analyzer Features: - Execute SQL Queries against a SQL Server Compact Edition database - Easily edit the contents of the database - Supports SQLCE 3.1, 3.5 and 4.0 Prerequisites: - .NET Framework 4.0ShowUI: Write-UI -in PowerShell: ShowUI: ShowUI is a PowerShell module to help you write rich user interfaces in script.SharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.0.3: Fixed User Management screen when "RequiresQuestionAndAnswer" set to true Reply to Email Address can now be customized User Management page now only displays users that reside in the membership database Web parts have been changed to inherit from System.Web.UI.WebControls.WebParts.WebPart, so that they will display on anonymous application pages For installation and configuration steps see here.Babylon Toolkit: Babylon.Toolkit v1.0.4: Note about samples: In order to run samples, you need to configure visual studio to run them as an "Out-of-browser application". in order to do that, go to the property page of a sample project, go to the Debug tab, and check the "Out-of-browser application" radio. New features : New Effects BasicEffect3Lights (3 dir lights instead of 1 position light) CartoonEffect (work in progress) SkinnedEffect (with normal and specular map support) SplattingEffect (for multi-texturing with smooth ...SizeOnDisk: 1.0.8.2: With installerTerrariViewer: TerrariViewer v2.5: Added new items associated with Terraria v1.0.3 to the character editor. Fixed multiple bugs with Piggy Bank EditorySterling NoSQL OODB for .NET 4.0, Silverlight 4 and 5, and Windows Phone 7: Sterling OODB v1.5: Welcome to the Sterling 1.5 RTM. This version is backwards compatible without modification to the 1.4 beta. For the 1.0, you will need to upgrade your database. Please see this discussion for details. You must modify your 1.0 code for persistence. The 1.5 version defaults to an in-memory driver. To save to isolated storage or use one of the new mechanisms, see the available drivers and pass an instance of the appropriate one to your database (different databases may use different drivers). ...EnhSim: EnhSim 2.4.6 BETA: 2.4.6 BETAThis release supports WoW patch 4.1 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the proper...Grammar and Spell Checking Plugin for Windows Live Writer: Grammar Checker Plugin v1.0: First version of the grammar checker plugin for Windows Live Writer.patterns & practices: Project Silk: Project Silk Community Drop 10 - June 3, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Application Notifications" chapter. Updated "Server-Side Implementation" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To install and run the reference implementation, you must perform the fol...Claims Based Identity & Access Control Guide: Release Candidate: Highlights of this release This is the release candidate drop of the new "Claims Identity Guide" edition. In this release you will find: All code samples, including all ACS v2: ACS as a Federation Provider - Showing authentication with LiveID, Google, etc. ACS as a FP with Multiple Business Partners. ACS and REST endpoints. Using a WP7 client with REST endpoints. All ACS specific chapters. Two new chapters on SharePoint (SSO and Federation) All revised v1 chapters We are now ...Terraria Map Generator: TerrariaMapTool 1.0.0.4 Beta: 1) Fixed the generated map.html file so that the file:/// is included in the base path. 2) Added the ability to use parallelization during generation. This will cause the program to use as many threads as there are physical cores. 3) Fixed some background overdraw.DotRas: DotRas v1.2 (Version 1.2.4168): This release includes compiled (and signed) versions of the binaries, PDBs, CHM help documentation, along with both C# and VB.NET examples. Please don't forget to rate the release! If you find a bug, please open a work item and give as much description as possible. Stack traces, which operating system(s) you're targeting, and build type is also very helpful for bug hunting. If you find something you believe to be a bug but are not sure, create a new discussion on the discussions board. Thank...BIDS Helper: BIDS Helper 1.5: New Features Duplicate Role feature for SSAS Biml Package Generator feature for SSIS Fixes and Updates Fixes issue with Printer Friendly Dimension Usage not working from the cube right-click menu Integrated new SSIS Expression Editor Control (http://expressioneditor.codeplex.com - v1.0.3.0) SSIS variable move dialog includes improved validation as well as UI enhancements SSIS Expression List now supports variables, constraints and nested objects, as well as UI enhancements New Enab...Caliburn Micro: WPF, Silverlight and WP7 made easy.: Caliburn.Micro v1.1 RTW: Download ContentsDebug and Release Assemblies Samples Changes.txt License.txt Release Highlights For WP7A new Tombstoning API based on ideas from Fluent NHibernate A new Launcher/Chooser API Strongly typed Navigation SimpleContainer included The full phone lifecycle is made easy to work with ie. we figure out whether your app is actually Resurrecting or just Continuing for you For WPFSupport for the Client Profile Better support for WinForms integration All PlatformsA power...VidCoder: 0.9.1: Added color coding to the Log window. Errors are highlighted in red, HandBrake logs are in black and VidCoder logs are in dark blue. Moved enqueue button to the right with the other control buttons. Added logic to report failures when errors are logged during the encode or when the encode finishes prematurely. Added Copy button to Log window. Adjusted audio track selection box to always show the full track name. Changed encode job progress bar to also be colored yellow when the enco...New ProjectsALogger: Alogger is a simple logger for time execution of methods. Uses Postsharp and SQL Server Compact. How to use?? Add Attribute to your method to check their speed of execution and its ready Sample: [AspectLogTime("Category")] private void SpeedMethod(string name) { //do something.. } Is it too simple? Azure WCF with WAS Portsharing: Sample WCF project with an Azure Webrole that supports TCP endpoints on the same port as Web (port 80). This is accomplished with the TCPPortSharing service. This project is a starter project to enable WAS (Windows Activation Service) with Windows Azure.DotNetToscana: DotNetToscana è lo User Group Toscano su .NET, un gruppo senza fini di lucro formato da persone con una forte passione per l’informatica e in particolare per prodotti e tecnologie legate al Microsoft .NET Framework.Email: Email providereriser: sandboxFacturación CFDI para Microempresas: Proyecto que pretende ayudar a la microempresa a realizar su transición de usar factura en papel a formato electrónicoFolder To SharePoint Metadata Migrator (Folders2SP): PowerShell 2.0 script to facilitate migration of SharePoint/Folder structure to a SPS2010 document library using words in the folders to set taxonomy field values, and web services to lookup source metadata and retrieve versions. Use Case: Migrate MOSS library to SPS library.Gestor de tikets de soporte técnico: Una aplicacion basada en ASP.NET que permite gestionar tikets de soporte técnicoGoogle Doc Uploader: Very simple application that allows you to upload documents to your own google document area with the right click of a mouse button.HTML App Host Framework for Phone 7: This is an HTML Application Host framework for building HTML/JavaScript for Windows Phone 7 with mango this will be for HTML5. The framework consists of controls needed to support embed html apps in a standard xap format used by the market place for deploying to phone 7.MOBZKeys: Press a hotkey to expand text fragments in any application. Unobtrusive, fully configurable from the task bar.MVC_imovies: Proyecto de tesis.RandomRat: RandomRat is a program for generating random sets that meet specific criteriaScenario Testing: Scenario Testing is an interactive tool to define your test scenarios by dragging and dropping methods to be tested. It is build using Workflow Foundation 4 (WF 4). The test scenarios can be saved and loaded again for testing.SEProject: SEProject Sharepoint 2010 Diagnostic Log Compression: This sharepoint extention helps you to compress,copy or move sharepoint uls log files to another location with a scheduled time for backup purpose.Snowball: Snowball is an in progress 2D Game Engine written in C#. It uses SlimDX under the covers but the underlying technology is abstracted away from the end user.T24 Project: T24 ProjectTaller Monitor: Taller MonitorTeam Build Deployer: Team Build Deployer makes it easy to deploy web application projects using Team Build 2010. The solution is written in C#, and enhanced build scripts, and enables Team build to use the built in web application deployment packaging configured found in Visual Studio 2010. This solution is intended to make continuous deployment easy and secure and reusable for any Visual Studio 2010 web application.Test SiteDataQuery SharePoint 2010: Software to testing SiteDataQuery Sharepoint 2010TextWrapper: A IIS managed module that enables word wrap of plain text content. Supports GZip and Deflate encoding. This module increases readability of text files that contain long lines.UMC Information System Alumni Center Website: This project is our final task for course Internet Programming II at Study Program of Information System, Faculty of Technology and Science at University of Ma Chung (UMC). UMC is private educational institution, first university in Indonesia applying Microsoft technology thoroughly called the total solution, which established in Malang, East Java, Indonesia. We named our project 'UMC Information System Alumni Center'. It doesn't mean this project is really used to be official website for ...WeatherDotCom Module for Orchard CMS: Using the Weather Channel feeds, you can connect to weather.com and pull in weather conditions for a particular search term. A live working demonstration of this module can be found on my website at jasongaylord.comWindows Phone Essentials: This library is focused on making the common things you have to do in every windows phone application, like persist application settings, use tasks/choosers, log/trace, threading/asynchronous development etc. testable.Wpf .Net Profiler: A .net profiler with wpf and sqlite

  Read the article

• CodePlex Daily Summary for Monday, March 12, 2012

  CodePlex Daily Summary for Monday, March 12, 2012Popular ReleasesAvalonDock: AvalonDock 2.0.0345: Welcome to early alpha release of AvalonDock 2.0 I've completely rewritten AvalonDock in order to take full advantage of the MVVM pattern. New version also boost a lot of new features: 1) Deep separation between model and layout. 2) Full WPF binding support thanks to unified logical tree between main docking manager, auto-hide windows and floating windows. 3) Support for Aero semi-maximized windows feature. 4) Support for multiple panes in the same floating windows. For a short list of new f...Windows Azure PowerShell Cmdlets: Windows Azure PowerShell Cmdlets 2.2.2: Changes Added Start Menu Item for Easy Startup Added Link to Getting Started Document Added Ability to Persist Subscription Data to Disk Fixed Get-Deployment to not throw on empty slot Simplified numerous default values for cmdlets Breaking Changes: -SubscriptionName is now mandatory in Set-Subscription. -DefaultStorageAccountName and -DefaultStorageAccountKey parameters were removed from Set-Subscription. Instead, when adding multiple accounts to a subscription, each one needs to be added ...IronPython: 2.7.2: On behalf of the IronPython team, I'm happy to announce the final release IronPython 2.7.2. This release includes everything from IronPython 54498 and 62475 as well. Like all IronPython 2.7-series releases, .NET 4 is required to install it. Installing this release will replace any existing IronPython 2.7-series installation. Unlike previous releases, the assemblies for all supported platforms are included in the installer as well as the zip package, in the "Platforms" directory. IronPython 2...Kooboo CMS: Kooboo CMS 3.2.0.0: Breaking changes: When upgrade from previous versions, MUST reset the all the content type templates, otherwise the content manager might get a compile error. New features Integrate with Windows azure. See: http://wiki.kooboo.com/?wiki=Kooboo CMS on Azure Complete solution to deploy on load balance servers. See: http://wiki.kooboo.com/?wiki=Kooboo CMS load balance Update Jquery and Jquery ui to the lastest version(Jquery 1.71, Jquery UI 1.8.16). Tree style text content editing. See:h...FluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 2.0: New features: - Support for events: OnConnectionClosed, OnConnectionOpened, OnConnectionOpening, OnError, OnExecuted, OnExecuting - Added a CommandTimeout method on the Context. This allows you to set the time out for all the commands. - QueryValues support has been added for Stored Procedures. Changes to existing features: - IgnoreProperty has been moved from a separate property to be a parameter in the AutoMap method.Home Access Plus+: v7.10: Don't forget to add your location to the list: http://www.nbdev.co.uk/projects/hap/locations.aspx Changes: Added: CompressJS controls to the Help Desk & Booking System (reduces page size) Fixed: Debug/Release mode detection in CompressJS control Added: Older Browsers will use an iframe and the old uploadh.aspx page (works better than the current implementation on older browsers) Added: Permalinks for my files, you can give out links that redirect to the correct location when you log i...SubExtractor: Release 1026: Fix: multi-colored bluray subs will no longer result in black blob for OCR Fix: dvds with no language specified will not cause exception in name creation of subtitle files Fix: Root directory Dvds will use volume label as their directory nameExtensions for Reactive Extensions (Rxx): Rxx 1.3: Please read the latest release notes for details about what's new. Related Work Items Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many wrappers that convert asynchronous Framework Class Library APIs into observables. Many useful types such as ListSubject<T>, DictionarySubject<T>, CommandSubject, ViewModel, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T>, Scala...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.47: Properly output escaped characters in CSS identifiers throw an EOF error when parsing a CSS selector that doesn't end in a declaration block chased down a stack-overflow issue with really large JS sources. Needed to flatten out the AST tree for adjacent expression statements that the application merges into a single expression statement, or that already contain large, comma-separated expressions in the original source. fix issue #17569: tie together the -debug switch with the DEBUG defi...Player Framework by Microsoft: Player Framework for Windows 8 Metro (BETA): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications.WPF Application Framework (WAF): WAF for .NET 4.5 (Experimental): Version: 2.5.0.440 (Experimental): This is an experimental release! It can be used to investigate the new .NET Framework 4.5 features. The ideas shown in this release might come in a future release (after 2.5) of the WPF Application Framework (WAF). More information can be found in this dicussion post. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 11) The unit test projects require Visual Studio 11 Professional Changelog All: Upgrade all proje...SSH.NET Library: 2012.3.9: There are still few outstanding issues I wanted to include in this release but since its been a while and there are few new features already I decided to create a new release now. New Features Add SOCKS4, SOCKS5 and HTTP Proxy support when connecting to remote server. For silverlight only IP address can be used for server address when using proxy. Add dynamic port forwarding support using ForwardedPortDynamic class. Add new ShellStream class to work with SSH Shell. Add supports for mu...Test Case Import Utilities for Visual Studio 2010 and Visual Studio 11 Beta: V1.2 RTM: This release (V1.2 RTM) includes: Support for connecting to Hosted Team Foundation Server Preview. Support for connecting to Team Foundation Server 11 Beta. Fix to issue with read-only attribute being set for LinksMapping-ReportFile which may have led to problems when saving the report file. Fix to issue with “related links” not being set properly in certain conditions. Fix to ensure that tool works fine when the Excel file contained rich text data. Note: Data is still imported in pl...DotNetNuke® Community Edition CMS: 06.01.04: Major Highlights Fixed issue with loading the splash page skin in the login, privacy and terms of use pages Fixed issue when searching for words with special characters in them Fixed redirection issue when the user does not have permissions to access a resource Fixed issue when clearing the cache using the ClearHostCache() function Fixed issue when displaying the site structure in the link to page feature Fixed issue when inline editing the title of modules Fixed issue with ...Mayhem: Mayhem Developer Preview: This is the developer preview of Mayhem. Enjoy!Magelia WebStore Open-source Ecommerce software: Magelia WebStore 1.2: Medium trust compliant lot of small change for medium trust compliance full refactoring of user management refactoring of Client Refactoring of user management Magelia.WebStore.Client no longer reference Magelia.WebStore.Services.Contract Refactoring page category multi parent category added copy category feature added Refactoring page catalog copy catalog feature added variant management improvement ability to define a default variant for a variable product ability to ord...PDFsharp - A .NET library for processing PDF: PDFsharp and MigraDoc Foundation 1.32: PDFsharp and MigraDoc Foundation 1.32 is a stable version that fixes a few bugs that were found with version 1.31. Version 1.32 includes solutions for Visual Studio 2010 only (but it should be possible to add the project files to existing solutions for VS 2005 or VS 2008). Users of VS 2005 or VS 2008 can still download version 1.31 with the solutions for those versions that allow them to easily try the samples that are included. While it may create smaller PDF files than version 1.30 because...Terminals: Version 2.0 - Release: Changes since version 1.9a:New art works New usability in Organize favorites window Improved usability of imports/exports and scans Large number of fixes Improvements in single instance mode Comparing November beta 4, this corrects: New application icons Doesn't show Logon error codes Fixed command line arguments exception for single instance mode Fixed detaching of tabs improved usability in detached window Fixed option settings for Capture manager Fixed system tray noti...MFCMAPI: March 2012 Release: Build: 15.0.0.1032 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeTortoiseHg: TortoiseHg 2.3.1: bugfix releaseNew ProjectsBurrow.NET: Burrow is a simple library created based on some EasyNetQ ideas, it's a thin wrapper of RabbitMQ.Client for .NET. Basically, if you just need to put your message or subscribe messages from RabbitMQ server, you found the right place. With Burrow.NET, you can easily customize almost everything start with exchange and queue name, changing the way to serialize your object, inject custom error handling strategies, etc.C# Base Media File Format Library: Parses ISO Base Media File Format files including QuickTime (.mov, .mp4, .m4v, .m4a), Microsoft Smooth Streaming (.ismv, .isma, .ismc), JPEG2000 (.jp2, .jpf, .jpx), Motion JPEG2000 (.mj2, .mjp2), 3GPP/3GPP2 (.3gp, .3g2) and other conforming format extensions.devtm.Aop: Aspect Oriented Programming with Mono.Cecil (on build time and runtime)Dynamics CRM 2011 Script# Xrm.Page Library: This is a Script# (scriptsharp) import library that you can use to write Dynamics CRM 2011 web resources easily and efficiently. This library provides access to all functions currently documented under MSDN Xrm.Page.EntityUI: EntityUI is basically an idea to be able to create User Interface in ASP .Net applications using Code First approcah. Flurr: Flurr is the ultimate open source API wrapper library for different social networks such as Tumblr, Twitter and more! With it, you can easily connect to social networks in your desktop or web applications, by simply importing a .dll file.GerenciadorPacotes: Gerenciador de PacotesInfo Bandung: Woyyy, Orang Bandung kita bagi2 Info yu disini, smua tentang Bandung boleh tempat makanan, tempat gaul, trend, tempat murah,,, apapun yang asik-asik :-) jstring Multilingual Class Library: jstring is a small library that provides multilingual string support. The jstring class provides programmatic support for projects that require the ability to change languages on-the-fly. Kinect: Tower Defence: Kinect: Tower Defence is a 2D tower defence game programmed in C# using the XNA Framework, played on the PC. It will make use of the Kinect hardware and motion tracking to add more fun to how the game is controlled and played.Kuick -- Application Framework: An Application Framework. Kuick Data -- ORM Framework: An ORM FrameworkMelorin Radio: This is a test project for radioNorthwind-projekt: Projekt oparty na bazie Northwindolaf: olaf makes it easier for manual qa testers to use selenium web-driver by defining their test case flows in excel spreadsheets.OpenSOCKS (Open Shared Objective Collaborative Kernel System): OpenSOCKS is the best of two fantastic C# -> OS kernel compilers (MOSA and COSMOS) We are open source and aim to make our kernel simple and full of features. OpenSOCKS (Open Shared Objective Collaborative Kernel System) - by the makers of PearOSpelotas: okRadaCode.SwissKnife: SwissKnife is a RadaCode's collection of C# classes that facilitate the overall development and help with stuff like HTML removal, random name and number generation, etc. Simple AutoUpdater: This project is a simple updater.Simple TFS Tool: Simple TFS Tool for getting source from TFSSISAP: SISAPSnippet Compiler Tool Window: Snippet Compiler adds a tool window to the Visual Studio 2010 and 11 Beta where you can type/paste code snippets and try to compile them to see if they workTagomatique: Permet la gestion de fichiers multimédia sur principe des tagstsi2012: Proyecto de TS1 año 2012wbgj: this is weibo projectWindows Phone 7 Text Style Picker: WP7TextStylePicker was created to fill the gaping whole in the SDK: surprisingly, there is no control that would allow setting text properties (Color, Font Family, Font Size, Bold, Italic) - even though this sounds like a very basic task that many applications would need.WPLiveEdu: Windows phone application for browsing Live@Edu calendar

  Read the article

• How to add new filters to CAML queries in SharePoint 2007

  - by uruit

    Normal 0 21 false false false ES-UY X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} One flexibility SharePoint has is CAML (Collaborative Application Markup Language). CAML it’s a markup language like html that allows developers to do queries against SharePoint lists, it’s syntax is very easy to understand and it allows to add logical conditions like Where, Contains, And, Or, etc, just like a SQL Query. For one of our projects we have the need to do a filter on SharePoint views, the problem here is that the view it’s a list containing a CAML Query with the filters the view may have, so in order to filter the view that’s already been filtered before, we need to append our filters to the existing CAML Query. That’s not a trivial task because the where statement in a CAML Query it’s like this: <Where>   <And>     <Filter1 />     <Filter2 />   </And> </Where> If we want to add a new logical operator, like an OR it’s not just as simple as to append the OR expression like the following example: <Where>   <And>     <Filter1 />     <Filter2 />   </And>   <Or>     <Filter3 />   </Or> </Where> But instead the correct query would be: <Where>   <Or>     <And>       <Filter1 />       <Filter2 />     </And>     <Filter3 />   </Or> </Where> Notice that the <Filter# /> tags are for explanation purpose only. In order to solve this problem we created a simple component, it has a method that receives the current query (could be an empty query also) and appends the expression you want to that query. Example: string currentQuery = @“ <Where>    <And>     <Contains><FieldRef Name='Title' /><Value Type='Text'>A</Value></Contains>     <Contains><FieldRef Name='Title' /><Value Type='Text'>B</Value></Contains>   </And> </Where>”; currentQuery = CAMLQueryBuilder.AppendQuery(     currentQuery,     “<Contains><FieldRef Name='Title' /><Value Type='Text'>C</Value></Contains>”,     CAMLQueryBuilder.Operators.Or); The fist parameter this function receives it’s the actual query, the second it’s the filter you want to add, and the third it’s the logical operator, so basically in this query we want all the items that the title contains: the character A and B or the ones that contains the character C. The result query is: <Where>   <Or>      <And>       <Contains><FieldRef Name='Title' /><Value Type='Text'>A</Value></Contains>       <Contains><FieldRef Name='Title' /><Value Type='Text'>B</Value></Contains>     </And>     <Contains><FieldRef Name='Title' /><Value Type='Text'>C</Value></Contains>   </Or> </Where>             The code:   First of all we have an enumerator inside the CAMLQueryBuilder class that has the two possible Options And, Or. public enum Operators { And, Or }   Then we have the main method that’s the one that performs the append of the filters. public static string AppendQuery(string containerQuery, string logicalExpression, Operators logicalOperator){   In this method the first we do is create a new XmlDocument and wrap the current query (that may be empty) with a “<Query></Query>” tag, because the query that comes with the view doesn’t have a root element and the XmlDocument must be a well formatted xml.   XmlDocument queryDoc = new XmlDocument(); queryDoc.LoadXml("<Query>" + containerQuery + "</Query>");   The next step is to create a new XmlDocument containing the logical expression that has the filter needed.   XmlDocument logicalExpressionDoc = new XmlDocument(); logicalExpressionDoc.LoadXml("<root>" + logicalExpression + "</root>"); In these next four lines we extract the expression from the recently created XmlDocument and create an XmlElement.                  XmlElement expressionElTemp = (XmlElement)logicalExpressionDoc.SelectSingleNode("/root/*"); XmlElement expressionEl = queryDoc.CreateElement(expressionElTemp.Name); expressionEl.InnerXml = expressionElTemp.InnerXml;   Below are the main steps in the component logic. The first “if” checks if the actual query doesn’t contains a “Where” clause. In case there’s no “Where” we add it and append the expression.   In case that there’s already a “Where” clause, we get the entire statement that’s inside the “Where” and reorder the query removing and appending elements to form the correct query, that will finally filter the list.   XmlElement whereEl; if (!containerQuery.Contains("Where")) { queryDoc.FirstChild.AppendChild(queryDoc.CreateElement("Where")); queryDoc.SelectSingleNode("/Query/Where").AppendChild(expressionEl); } else { whereEl = (XmlElement)queryDoc.SelectSingleNode("/Query/Where"); if (!containerQuery.Contains("<And>") &&                 !containerQuery.Contains("<Or>"))        {              XmlElement operatorEl = queryDoc.CreateElement(GetName(logicalOperator)); XmlElement existingExpression = (XmlElement)whereEl.SelectSingleNode("/Query/Where/*"); whereEl.RemoveChild(existingExpression);                 operatorEl.AppendChild(existingExpression);               operatorEl.AppendChild(expressionEl);                 whereEl.AppendChild(operatorEl);        }        else        {              XmlElement operatorEl = queryDoc.CreateElement(GetName(logicalOperator)); XmlElement existingOperator = (XmlElement)whereEl.SelectSingleNode("/Query/Where/*");                 whereEl.RemoveChild(existingOperator);               operatorEl.AppendChild(existingOperator);               operatorEl.AppendChild(expressionEl);                 whereEl.AppendChild(operatorEl);         }  }  return queryDoc.FirstChild.InnerXml }     Finally the GetName method converts the Enum option to his string equivalent.   private static string GetName(Operators logicalOperator) {       return Enum.GetName(typeof(Operators), logicalOperator); }        This component helped our team a lot using SharePoint 2007 and modifying the queries, but now in SharePoint 2010; that wouldn’t be needed because of the incorporation of LINQ to SharePoint. This new feature enables the developers to do typed queries against SharePoint lists without the need of writing any CAML code.   Normal 0 21 false false false ES-UY X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Post written by Sebastian Rodriguez - Portals and Collaboration Solutions @ UruIT  

  Read the article

• How to add new filters to CAML queries in SharePoint 2007

  - by uruit

  Normal 0 21 false false false ES-UY X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} One flexibility SharePoint has is CAML (Collaborative Application Markup Language). CAML it’s a markup language like html that allows developers to do queries against SharePoint lists, it’s syntax is very easy to understand and it allows to add logical conditions like Where, Contains, And, Or, etc, just like a SQL Query. For one of our projects we have the need to do a filter on SharePoint views, the problem here is that the view it’s a list containing a CAML Query with the filters the view may have, so in order to filter the view that’s already been filtered before, we need to append our filters to the existing CAML Query. That’s not a trivial task because the where statement in a CAML Query it’s like this: <Where>   <And>     <Filter1 />     <Filter2 />   </And> </Where> If we want to add a new logical operator, like an OR it’s not just as simple as to append the OR expression like the following example: <Where>   <And>     <Filter1 />     <Filter2 />   </And>   <Or>     <Filter3 />   </Or> </Where> But instead the correct query would be: <Where>   <Or>     <And>       <Filter1 />       <Filter2 />     </And>     <Filter3 />   </Or> </Where> Notice that the <Filter# /> tags are for explanation purpose only. In order to solve this problem we created a simple component, it has a method that receives the current query (could be an empty query also) and appends the expression you want to that query. Example: string currentQuery = @“ <Where>    <And>     <Contains><FieldRef Name='Title' /><Value Type='Text'>A</Value></Contains>     <Contains><FieldRef Name='Title' /><Value Type='Text'>B</Value></Contains>   </And> </Where>”; currentQuery = CAMLQueryBuilder.AppendQuery(     currentQuery,     “<Contains><FieldRef Name='Title' /><Value Type='Text'>C</Value></Contains>”,     CAMLQueryBuilder.Operators.Or); The fist parameter this function receives it’s the actual query, the second it’s the filter you want to add, and the third it’s the logical operator, so basically in this query we want all the items that the title contains: the character A and B or the ones that contains the character C. The result query is: <Where>   <Or>      <And>       <Contains><FieldRef Name='Title' /><Value Type='Text'>A</Value></Contains>       <Contains><FieldRef Name='Title' /><Value Type='Text'>B</Value></Contains>     </And>     <Contains><FieldRef Name='Title' /><Value Type='Text'>C</Value></Contains>   </Or> </Where>     The code:   First of all we have an enumerator inside the CAMLQueryBuilder class that has the two possible Options And, Or. public enum Operators { And, Or }   Then we have the main method that’s the one that performs the append of the filters. public static string AppendQuery(string containerQuery, string logicalExpression, Operators logicalOperator){   In this method the first we do is create a new XmlDocument and wrap the current query (that may be empty) with a “<Query></Query>” tag, because the query that comes with the view doesn’t have a root element and the XmlDocument must be a well formatted xml.   XmlDocument queryDoc = new XmlDocument(); queryDoc.LoadXml("<Query>" + containerQuery + "</Query>");   The next step is to create a new XmlDocument containing the logical expression that has the filter needed.   XmlDocument logicalExpressionDoc = new XmlDocument(); logicalExpressionDoc.LoadXml("<root>" + logicalExpression + "</root>"); In these next four lines we extract the expression from the recently created XmlDocument and create an XmlElement.                  XmlElement expressionElTemp = (XmlElement)logicalExpressionDoc.SelectSingleNode("/root/*"); XmlElement expressionEl = queryDoc.CreateElement(expressionElTemp.Name); expressionEl.InnerXml = expressionElTemp.InnerXml;   Below are the main steps in the component logic. The first “if” checks if the actual query doesn’t contains a “Where” clause. In case there’s no “Where” we add it and append the expression.   In case that there’s already a “Where” clause, we get the entire statement that’s inside the “Where” and reorder the query removing and appending elements to form the correct query, that will finally filter the list.   XmlElement whereEl; if (!containerQuery.Contains("Where")) { queryDoc.FirstChild.AppendChild(queryDoc.CreateElement("Where")); queryDoc.SelectSingleNode("/Query/Where").AppendChild(expressionEl); } else { whereEl = (XmlElement)queryDoc.SelectSingleNode("/Query/Where"); if (!containerQuery.Contains("<And>") &&                 !containerQuery.Contains("<Or>"))        {              XmlElement operatorEl = queryDoc.CreateElement(GetName(logicalOperator)); XmlElement existingExpression = (XmlElement)whereEl.SelectSingleNode("/Query/Where/*"); whereEl.RemoveChild(existingExpression);                 operatorEl.AppendChild(existingExpression);               operatorEl.AppendChild(expressionEl);                 whereEl.AppendChild(operatorEl);        }        else        {              XmlElement operatorEl = queryDoc.CreateElement(GetName(logicalOperator)); XmlElement existingOperator = (XmlElement)whereEl.SelectSingleNode("/Query/Where/*");                 whereEl.RemoveChild(existingOperator);               operatorEl.AppendChild(existingOperator);               operatorEl.AppendChild(expressionEl);                 whereEl.AppendChild(operatorEl);         }  }  return queryDoc.FirstChild.InnerXml }     Finally the GetName method converts the Enum option to his string equivalent.   private static string GetName(Operators logicalOperator) {       return Enum.GetName(typeof(Operators), logicalOperator); }        Normal 0 21 false false false ES-UY X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 21 false false false ES-UY X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} This component helped our team a lot using SharePoint 2007 and modifying the queries, but now in SharePoint 2010; that wouldn’t be needed because of the incorporation of LINQ to SharePoint. This new feature enables the developers to do typed queries against SharePoint lists without the need of writing any CAML code.  But there is still much development to the 2007 version, so I hope this information is useful for other members.  Post Normal 0 21 false false false ES-UY X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} written by Sebastian Rodriguez - Portals and Collaboration Solutions @ UruIT

  Read the article

• CodePlex Daily Summary for Friday, March 09, 2012

  CodePlex Daily Summary for Friday, March 09, 2012Popular ReleasesSSH.NET Library: 2012.3.9: There are still few outstanding issues I wanted to include in this release but since its been a while and there are few new features already I decided to create a new release now. New Features Add SOCKS4, SOCKS5 and HTTP Proxy support when connecting to remote server. For silverlight only IP address can be used for server address when using proxy. Add dynamic port forwarding support using ForwardedPortDynamic class. Add new ShellStream class to work with SSH Shell. Add supports for mu...fnr.exe - Find And Replace Tool: 1.0: You can read all about the new features here: Here is the Summary Preview Matches Stats File errors for read/write Support for regular expressions Fixed a bug that required you to press enter to continue after running fnr.exe from command line Context menu to display containing folder or open the file Double click on results row to open the file (similar to double clicking in windows explorer) Binary detection – skip files that are binaryTest Case Import Utilities for Visual Studio 2010 and Visual Studio 11 Beta: V1.2 RTM: This release (V1.2 RTM) includes: Support for connecting to Hosted Team Foundation Server Preview. Support for connecting to Team Foundation Server 11 Beta. Fix to issue with read-only attribute being set for LinksMapping-ReportFile which may have led to problems when saving the report file. Fix to issue with “related links” not being set properly in certain conditions. Fix to ensure that tool works fine when the Excel file contained rich text data. Note: Data is still imported in pl...Audio Pitch & Shift: Audio Pitch And Shift 3.5.0: Modules (mod, xm, it, etc..) supportcallisto: callisto 2.0.19: BUG FIX: Autorun.load() function in scripting now has sandboxed path (Thanks Mikey!) BUG FIX: UserObject.Name property now allows full 20 byte string replacements. FEATURE REQUEST: File.* script functions now allow file extensions.DotNetNuke® Community Edition CMS: 06.01.04: Major Highlights Fixed issue with loading the splash page skin in the login, privacy and terms of use pages Fixed issue when searching for words with special characters in them Fixed redirection issue when the user does not have permissions to access a resource Fixed issue when clearing the cache using the ClearHostCache() function Fixed issue when displaying the site structure in the link to page feature Fixed issue when inline editing the title of modules Fixed issue with ...Mayhem: Mayhem Developer Preview: This is the developer preview of Mayhem. Enjoy!Magelia WebStore Open-source Ecommerce software: Magelia WebStore 1.2: Medium trust compliant lot of small change for medium trust compliance full refactoring of user management refactoring of Client Refactoring of user management Magelia.WebStore.Client no longer reference Magelia.WebStore.Services.Contract Refactoring page category multi parent category added copy category feature added Refactoring page catalog copy catalog feature added variant management improvement ability to define a default variant for a variable product ability to ord...Delta Engine: Delta Engine Beta Preview v0.9.4: v0.9.4 is the release for February 2012, but it was delayed till 2012-03-07 until content generation worked much better for v0.9.4. The main improvements were done on the server side (content generation and improved build support for iOS and Android). v0.9.4 is also the first version everyone can use to deploy their application onto all supported platforms, see Marketplace Licensing for details: http://deltaengine.net/Marketplace Documentation for this version can be found at: http://help.de...PDFsharp - A .NET library for processing PDF: PDFsharp and MigraDoc Foundation 1.32: PDFsharp and MigraDoc Foundation 1.32 is a stable version that fixes a few bugs that were found with version 1.31. Version 1.32 includes solutions for Visual Studio 2010 only (but it should be possible to add the project files to existing solutions for VS 2005 or VS 2008). Users of VS 2005 or VS 2008 can still download version 1.31 with the solutions for those versions that allow them to easily try the samples that are included. While it may create smaller PDF files than version 1.30 because...Terminals: Version 2.0 - Release: Changes since version 1.9a:New art works New usability in Organize favorites window Improved usability of imports/exports and scans Large number of fixes Improvements in single instance mode Comparing November beta 4, this corrects: New application icons Doesn't show Logon error codes Fixed command line arguments exception for single instance mode Fixed detaching of tabs improved usability in detached window Fixed option settings for Capture manager Fixed system tray noti...AutoLoL: AutoLoL v2.1.5: Updated version of Autolol that works with the Fiora patch.MFCMAPI: March 2012 Release: Build: 15.0.0.1032 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeSimple Injector: Simple Injector v1.4.1: This release adds two small improvements to the SimpleInjector.Extensions.dll. No changes have been made to the core library. New features and improvements in this release for the SimpleInjector.Extensions.dll The RegisterManyForOpenGeneric extension methods now accept non-generic decorator, as long as they implement the given open generic service type. GetTypesToRegister methods added to the OpenGenericBatchRegistrationExtensions class which allows to customize the behavior. Note that the...SQL Scriptz Runner: Application: Scriptz Runner source code and applicationPowerGUI Visual Studio Extension: PowerGUI VSX 1.5.2: Added support for PowerGUI 3.2.VidCoder: 1.3.1: Updated HandBrake core to 0.9.6 release (svn 4472). Removed erroneous "None" container choice. Change some logic and help text to stop assuming you have to pick the VIDEO_TS folder for a DVD scan. This should make previewing DVD titles on the Queue Multiple Titles window possible when you've picked the root DVD directory.Google Books Downloader for Windows: Google Books Downloader: Google Books Downloader 1.8ExtAspNet: ExtAspNet v3.1.0: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-03-04 v3.1.0 -??Hidden???????（〓?〓）。 -?PageManager??...AcDown????? - Anime&Comic Downloader: AcDown????? v3.9.1: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...New ProjectsAngry Birds in 1 Hour: This is a simple "Angry Birds" clone on Windows Phone 7 written in just 1 hour.ascent: ascent capture a capture productascentexpress: ascentexpressASP.NET MVVM Excalibur: ASP.NET MVVM Excalibur Project.this is Web Form base, has a new Binding Expression like WPF MVVM.Azure Virtual Directory: A program (or windows service) that registers a virtual directory on your local machine that is actually a gateway into an Azure Blob service. This will allow you to browse, create, modify and delete files directly in Windows Explorer, through a command prompt, or by any software that would be able to do so (as if it was writing to the local machine). This is not a directory that backs-up to Azure, but is rather *only* on Azure. Developed in C#.ClipFlair: ClipFlair - Foreign Language Learning through Interactive Revoicing and Captioning of ClipsCloudSpotter: CloudSpotter is a Windows Azure sample application that can be used for demo purposes or for learning the basic concepts of cloud application development. CloudSpotter makes it possible to convert, webcam based, cloud pictures to time-lapse video footage. Composing Wcf: Basic library providing a service host and service behavior capable of utilizing MEF for runtime composition of WCF SOAP and REST web services. Library provides composing Hosts and Host Factories for standard ServiceHost types, as well as WebServiceHost (RESTful).convert digit to word upto thousand: convert digit to word upto thousandDAL Generator using Database Application Block 5 and T4 Template: T4 template code for generating data base layer for normal CRUD operation using Repository Pattern. Database application block 5 features are used for generating database call and automatic mapping with DTOeuler 12 problem: euler 12 problemeuler 14 problem: euler 14 problemeuler 19 problem: euler 19 problemeuler 28: euler 28euler 30: euler 30euler 36 problem: euler 36 problemeuler 45: euler 45 problemeuler 52 problem: euler 52 problemeuler21: euler 21euler22: euler 22 problemeuler23: euler 23euler29: euler 29 problemeVet: eVet is a guidance project based on the fictional scenario of a Veterinary System used to monitor pets' medical history. It will be based on Azure and leverage the Worker role and SQL Azure datase to illustrate a multi-tenant cloud-based Pet management system. The ORM layer will be NHibernate and it will be based on the repository design pattern. If you want to help and learn Azure at the same time, I am looking for: - Designers (CSS3, HTML 5, Javascript) - Web Developers (ASP.Net ...Firemap: Generates a html page which displays key performance statistics of chosen computers. FolderHiderNet: FolderHiderNet, its a simple application developed in C#, that let users easily hide and unhide folder on their windows systems. It could be used in USB dispositives.Game of Life for Windows Phone: This is an XNA implementation of Conway's Game of Life for Windows Phone. The game is a grid of cells that live and die based on a simple set of rules. The player can arrange the live and dead cells, and start/stop the cell generation to see how the cells are interrelated. Features: - Save and load games - Start and stop generations - Adjust generation speed - Clear grid - Generate random grid - Sample shapes preloaded as saved games For more information on Conway's Game of Life...Gamoliyas: Gamoliyas is an open source John Conway's Game of Life game totally written in DHTML (JavaScript, CSS and HTML). Uses mouse and keyboard. Very configurable. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.Gembed: Transform url into Embed code using javascript. It is developed using jQuery, jQuery templates and javascript. Any contribution would be really apreciated.GIFT: gift appImageLoader iOS: ImageLoader is developed on iOS and it can be used in iPhone and iPad. It try to make application to support image downloading and cache easily. It downloads the image file from url, depended on ASIHttpRequest. And it cache the images into local file.MakkysStackOverflow: Learning how to build stackoverflow like site mysimpleproject: This is my test projectNWN Hak Merging Utility: Mostly automated Hak Merging utility for NWN .hak files.Oasis Text: Oasis Text is a simple, free text editor for Windows. It is written in C# and built with the ScintillaNET editing component. It is a work in progress and is free and open source software. Opds4Net: A .NET Library for Open Publication Distribution System (OPDS) Catalog protocol, a syndication format for electronic publications based on Atom. This project is created to simplify the process of creating an OPDS Catalog in .NET and standardize the result OPDS with least effort. Pratiques: Endroit pour gérer les Pratiques.scooby: This is a scooby dooby doo projectStaffKey: Study Project Projet d'étude Permet le lancement d'un serveur web sur une clé usb.SugataTools: SugataTools are the helper classes that I usually use in my projects.testtom03082012hg05: testtom03082012hg05testtom03082012tfs01: testtom03082012tfs01testtom03082012tfs02: testtom03082012tfs02TNTSerializer: A simple serializer which -Is faster than any other serializer -Does not require ISeriablable - Uses generic cached Reflection wrappers (FAST) -Should serialize ANY structure, no questions asked, no special markup required. -Can handle common attributes -handles optional parameteWholemy.LinkedLists: Wholemy Linked Lists realizationsworkApp: workAppWPF Yahoo Stock API: WPF application using PRISM & MVVM to display stock details using Yahoo API (YPL)

  Read the article

< Previous Page | 84 85 86 87 88 89 90  | Next Page >