Search Results

Search found 5212 results on 209 pages for 'forward'.

Page 88/209 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Check IMAP via PHP for mesages in order to interact with them via PHP?

  - by Roger

  I use Google to administer my e-mails and I run Nginx + PHP. If I want to check incoming mail to interact with each message subject (to trigger an action), as far as I know, I have only two options: 1) access Google via IMAP PHP / cron job or 2) forward the messages to my server where I can have a subdomain set to pipe the messages to a PHP script. Frankly, I'd preffer the first option because I have already all the IMAP functions tested and done. And if the second solution is really the best, I'd preffer to use Postfix. However, id like some light grom somebody who has already browsed this unknown waters. Thank you.

  Read the article

• stunnel: SSL-to-SSL? (for smtp/imap)

  - by nonot1

  Hello, How can I configure stunnel to accpet SSL connections, and connect then to an SSL port on a different server? Here is my setup: Our ISP's server, "Mail Server", supports smtp/imap over SSL. (Not starttls. Just over ssl.) But, I have a bunch of client machines that will only trust a specific, internal, root certificate. Thus, they can not connect to "Mail Server". For these client machines, I'd like to make a dedicated "Mail Tunnel" host that uses stunnel to listen with an in-house signed SSL certificate, and just forward data to "Mail Server" using a 2nd SSL connection. Can this be done? What would be the specific steps for Ubuntu Server 10.10? (I'm not too familiar with persistent service configuration.) Thank you

  Read the article

• Routing from the DMZ to the interior network only

  - by Allan

  I have a home network connected to Verizon's FIOS service. Verizon's ActionTec router is connected to the ONT via coax to establish the MOCA network. My DD-WRT router's WAN port is connected to one of the ActionTec's LAN ports. The DD-WRT router is configured with a static IP address and assigned to the DMZ (this is done so I only have to configure port forwarding once). My issue is that this does not allow computers connected to the DD-WRT to serve streaming audio/video to the MOCA network using Verizon's Media Manager. I know that Media Manager uses ports 18001, 5050, and 5060, but I don't know how to forward those ports so that they are only available to the ActionTec's network and not the rest of the internet.

  Read the article

• how to pass domain name to backend with pound

  - by FurtiveFelon

  I am using pound as a way to decode SSL for the backend, but the bulk of the work is done on varnish (including virtualhost stuff). As a result, I need pound to just forward all other traffic to varnish verbatim, but it doesn't seem to do that. I am using the default configuration: ListenHTTP Address 1.2.3.4 Port 8080 ## allow PUT and DELETE also (by default only GET, POST and HEAD)?: xHTTP 0 Service BackEnd Address 127.0.0.1 Port 80 End End End So whenever I hit example.com:8080, it will always redirect to the default backend for varnish, which i assume was because the domain (host) header isn't send along. Anyone know what could be wrong? Thanks a lot! Jason

  Read the article

• Nodejs for processing js and Nginx for handling everything else

  - by Kevin Parker

  I am having a nodejs running on port 8000 and nginx on port 80 on same server. I want Nginx to handle all the requests(image,css,etc) and forward js requests to nodejs server on port 8000. Is it possible to achieve this. i have configured nginx as reverse proxy but its forwarding every request to nodejs but i want nginx to process all except js. nginx/sites-enabled/default/ upstream nodejs { server localhost:8000; #nodejs } location / { proxy_pass http://192.168.2.21:8000; proxy_next_upstream error timeout invalid_header http_500 http_502 http_503 http_504; proxy_redirect off; proxy_buffering off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; }

  Read the article

• Chain Gateways on the LAN

  - by Black2night

  I installed m0n0wall in a virtualized environment, i have 10 PCs connected to a router ( 192.168.1.0/24) which connect them to the internet through PPPoE, the problem is that this router does not have a QoS so what i want to do is the following :- let all the PCs get their IP from the Router and the default gateway will be m0n0wall the moon wall will have 2 interface (Lan 192.168.1.20) and (Wan 192.168.1.21 and default gateway 192.168.1.1) now when any PC want to access the internet it should go through m0n0wall and then m0n0wall will forward the connection to the default gateway through the wan interface which is the PPPoE running on the router (192.168.1.1) the big question is this scenario possible or not and what do you suggest? Thanks

  Read the article

• Create a share on iscsi drive in Windows Server 2012

  - by Crash893

  I am brand new to server administration but I don't belive im trying to do anything to exotic I have a windows server 2012 (standard) and a drobo 800i My goal is to setup company shares on the iscsi target I have setup on the drobo So far I have: initialized the iscsi and connected made the iscsi disk read/write(it default started as read only) formatted and mounted it (as drive E:) from the server local desktop I can see and write files to the E:\ drive in shares wizard I do not see it as a volume option when I view the volumes window I see (e: drobo Fixed 16tb 16tb) I'm new to everything but I would think since its a mounted drive I should be able to share a folder on it but it appears its not that straight forward suggestions?

  Read the article

• How can I set Out-Of-Office in a shared mailbox

  - by balexandre

  I would want to set the out-of-office automatic response to all emails that arrive to our [email protected]. currently in the Outlook, I only have one mailbox (the user mailbox) but it has 2 shared mailboxes setup. I have tried to create a Rule that says: for all email received on account [email protected] forward to user [email protected] and make that user to set up the Out-of-office message, but it simply did not work, and I suspect that the rules only apply to the user account and not the shared account... How can I set Out-Of-Office in this shared mailbox ?

  Read the article

• Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

  - by ale

  I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

  Read the article

• Windows Server 2008 R2 Domain Controller DNS Reverse lookup zone needed?

  - by Joost Verdaasdonk

  When I create a new Domain Controller with dcpromo then the wizard will also add a DNS Role to the server because the first domain controller must be the global catalog server for the forest. After the install when I look at the DNS then I see the forward lookup zone for the newly created domain. However no zone is created for the Reverse lookup zone. So my question is: Is this an advisable endresult or not? In other words is it a good idea to add my domain to the reverse lookup zone as well? Just curious to hear how other people use this zone in the domain controller. Thanks

  Read the article

• Weird (?) issue with Exchange Forwarding

  - by abszero

  Hello everyone. Here is the long and short of it: the company I work for was purchased by another company who uses Gmail for domains as their email provider. We use an in house Exchange box. No big deal, I dropped into Active Directoy and created several Contact objects that represented our new email addresses at Gmail. I then went through each employees record and have their mail set to forward to this new address and not deliver locally. So I am forwarding email for me@domain1 to me@domain2 and this works great as long as I don't send an email from me@domain2 to me@domain1. If I log into my personal Gmail account and send an email to me@domain1 the email is properly forwarded to me@domain2. The mail coming from me@domain2 to me@domain1 seems to just get lost in the ether. Have I done something wrong or is this a quark with Exchange? Thanks!

  Read the article

• What features do you want to see in Windows Server?

  - by Ben Herila

  I work for the Windows Server planning and management team at Microsoft. While I can't share any of our current plans right now, I am interested in seeing what features people would like to see in the next release of Windows Server. Please post your ideas as separate answers, and vote for the ones you want to see. If there is an overwhelming response to an idea or two, I'll personally see what I can do to get the feature included. I know this question is subjective, but I do believe this thread has relevance to the community. Looking forward to hearing from you!

  Read the article

• Routing and Remote Access Port Mapping not applied to localhost

  - by Computer Guru

  Hi, I've set up Routing and Remote Access (Windows Server 2003) to forward publicip:80 to a server on the private internal network, and that's working great. Incoming requests from the internet to port 80 are correctly forwarded to our internal web server and everything is fine. However, requests on the server itself are not being forwarded. That is, if I open a console window and type "telnet publicip 80" from the server on publicip, the request is not forwarded to the private server. I understand that in RRAS I've mapped port 80 on the public interface to the private server and that's why it's not working; but I don't know how to configure it so that requests from the local PC are also forwarded to the private server. I'd appreciate any help or feedback on the matter. Thanks!

  Read the article

• Advice on new hardware firewall for a small company server-environment

  - by Mestika

  Hi everyone, My companies currently hardware firewall (an old ZyXEL ZyWALL firewall) and is indeed requiring an update to a new firewall. It is a small company with a similar small server-environment, so the need for a huge, complex and expensive solution isn’t there but a more “straight-forward” firewall, that can provide the necessary security to our systems and block unwanted elements from the core server and only accept access through our one server which is used as an “gateway” between the Internet and our internal network. I haven’t that much experience with hardware firewalls so I’m requesting any good advice and/or knowledge on which products will be suited for our specific need. If you need more information about the specific needs we require, please let me know and I’ll provide them to you. Sincerely - Mestika

  Read the article

• Bridging wireless and wired networks on Linux box

  - by nixnotwin

  I have the following setup: modem + router - - - - -Ubuntu box on master mode.........wireless devises. Ubuntu machine connects to Internet on wired network. I've dhcp3-server, masquerading, and wireless card with master mode on Ubuntu box. The issue is Ubuntu connects to the router on NAT. The wireless devises connect to the Ubuntu box on a NAT too (though different). SO my wireless devises are behind two NAT networks. The solution I am looking for is Ubuntu should forward dhcp requests to the modem+router, and Ubuntu should act as a switch or a bridge that allows wireless devises to connect to the wired network. So the modem+router should act a main router.

  Read the article

• Port Forwarding on Actiontec GT704-WG Router Issues

  - by adamweeks

  I am trying to setup a server at customer's location that has the Actiontec GT704-WG DSL router. The port forwarding it not working at all. Here's the details: Server: OpenSuse Linux box with a static IP address of 192.168.1.200 Application running accepting connections on port 8060 Firewall disabled Local connections (within the network) working properly Router: Updated to latest firmware available DHCP range set to 192.168.1.69-192.168.1.199 to not have any conflicts with the server Firewall set to "off" Rule set in the "Applications" setting to forward 8060 TCP and UDP to 192.168.1.200 machine (I've tried using the "TCP,UDP" option as well as both individual options) I've also tried just simply putting the server in the DMZ to see if I could connect to anything, but still nothing. Looking for any clues before I call and waste hours explaining the issue to tech support.

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• Windows 8.1 touchpad three-finger-multitouch gesture gone

  - by THEVAN3D

  Couple of days ago, i installed the Windows 8.1 Pro WMC and all of a sudden the touchpad gesture, which worked like a charm back in Win 8.1 preview, Win 8 and even Win 7, just stopped working. I am talking about the "Three Finger Flick" feature, which is used to go back and forward in folders and/or internet browsers at first i didnt even have the left edge pull feature, but then i added some values in this key into regedit, and now i have it [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Left Edge Pull] I Googled that, i didnt know what to do by myself and i dont know where to write and what to write anything in order to get the three finger flick back too I installed various versions of drivers starting from about version 15 to the version 17.0.8.0 (the one that i currently have), and even though i have all the other gestures, taps and swipes working they are not in the device settings, there is no multitouch gestures in device settings so thats why i guess i have to write something in regedit, but again, i dont know what to write, and where to write. please help me if you can

  Read the article

• Mac | Port Forwarding for Remote Desktop

  - by Vaibhav Bajpai

  I have two Mac notebooks at home, I have assigned them static private IPs. I have also set my router to a DynDNS address, which updates everytime my router gets a new public IP. I have enabled Screen Sharing on both notebooks. I can successfully goto my router webpage using the DynDNS address. I understand I need to port-forward to get Screen Sharing to work from outside. Lets assume, notebooks have private IP 192.168.1.2 and 192.168.1.3 I am kind of lost here, would appreciate some help (I need to be able remote desktop to both notebooks)

  Read the article

• NAT and ISP Subnet when load balancing on pfsense?

  - by dannymcc

  I have a pfsense box that I'm trying to plan the configuration for. I am going to be load balancing two ISP's, each with their own /29 static IP subnet. The question I have is in relation to the way those IP's are associated with workstations on the local network. Currently I have some workstations with local (192.168.1.0/29) IP addresses, and other more complicated workstation setups have their own public IP address. Some of the more complicated systems have a NAT 1:1 configuration where I forward a public IP address to a local IP address. Others however are directly on the ISP subnet and cannot be seen on our local network. Is this configuration possible with pfsense? If so, what terms should I be looking through the documentation for? Here is a simple/brief diagram of what I am trying to achieve.

  Read the article

• PHP Mail Relay via Remote smtp Server

  - by Toqeer

  We have a php application running on Linux which sends emails to there users. Currently its setup like php.ini is configured to send via local sendmail server but we have separate mail server for our organization for this domain. I want to send the php application emails via that remote smtp server so these emails can have the correct SPF records and sign via DKIM. But I could not see such option in php.ini to specify the remote host address to forward emails to that, its for windows only. I saw some post which suggest phpMailer but I could not find how to configure that so all our php application could send via our remote SMTP.

  Read the article

• Airport Express configuration

  - by Christina

  We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

  Read the article

• Cannot type backquote or backtick in xterm

  - by Cocoro Cara

  Ubuntu 10.10, XTerm(261), Keyboard layout = Canadian Somehow, the backquote (backtick = `) character can't be input does not get entered in XTerm. I type it and nothing happens. The cursor does not move forward. I know it works because I can input it in Terminal (gnome-terminal). The only strange thing is that I have to type the key twice for it to appear. Just to test it, I tried typing it in other applications, and the same thing happens. Have to type it twice in FF, gedit, etc. One more strange thing, I could not input it into this textbox in which I am typing this message. But I can input it in the URL bar, search bar, etc. Someone please help me solve this mystery. I like to use XTerm and I need the backquotes.

  Read the article

• DNS: domain2 points to domain1

  - by Yar

  I have one domain ("domain1") that is set up with hosting and mail (hosted by Gmail Apps). This domain works perfectly. I want a second domain ("domain2") to forward to domain1, but I don't want to use "DNS Forwarding." I would like to have it act EXACTLY like domain1, so that domain2/whatever points to the same resource as domain1/whatever WITHOUT AN HTTP REDIRECT NOR BROWSER TRICKS LIKE FRAMES. I would also love to be able to send mail to "blah@domain2" and have it go to "blah@domain1". Can this be set up, and how? I am using GoDaddy as registrar and DNS host for both domains. GoDaddy is also the web host for domain1, and mail hosting is with Google Apps.

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >