Search Results

Search found 3463 results on 139 pages for 'physical'.

Page 88/139 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • Ubuntu 12.04 Faster boot, Hibernate & other questions

    - by Samarth Shukla
    I've recently started exploring Ubuntu (my 1st distro). I fresh installed precise without a swap (4GB ram). The only issues are, slow boot (regardless of the swap) and instability after a few days of installation. The runtime performance is immaculate otherwise. Even though not needed, I still set swappiness = 10. I've tried the quiet splash profile to GRUB; already have preload installed. But it still is pretty slow. I am not too confident on recompiling the kernel yet. But you could please advice me on that too. I've also added the following to fstab: #Move /tmp to RAM: tmpfs /tmp tmpfs defaults,noexec,nosuid 0 0 (Also if you could please tell me the exact implication/scope of this tweak on physical ram & the swap.) But nothing has happened really. So what alternatives are there to make it boot faster? Also, right after fresh install, though no swap partition, the system still showed /dev/zram0 of arond 2GB which was never used (probably because of the above fstab edit). Finally, I experimented with Hibernate a little, but many claim that it doesn't work on 12.04. (Not to mention, I made a swap file of 4GB for it). What I did was: sudo gedit /var/lib/polkit-1/localauthority/50-local.d/hibernate.pkla Then I added the following lines, saved the file, and closed the text editor: [Re-enable Hibernate] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes I also edited the upower policy for hibernate: gksudo gedit /usr/share/polkit-1/actions/org.freedesktop.upower.policy I added these lines: < allow_inactive >no< /allow_inactive > < allow_active >yes< /allow_active > But it did not work. So is there an alternate method perhaps that can make it work on 12.04?

    Read the article

  • Why do programmers write closed source applications and then make them free? [closed]

    - by Ken
    As an entrepreneur/programmer who makes a good living from writing and selling software, I'm dumbfounded as to why developers write applications and then put them up on the Internet for free. You've found yourself in one of the most lucrative fields in the world. A business with 99% profit margin, where you have no physical product but can name your price; a business where you can ship a buggy product and the customer will still buy it. Occasionally some of our software will get a free competitor, and I think, this guy is crazy. He could be making a good living off of this but instead chose to make it free. Do you not like giant piles of money? Are you not confident that people would pay for it? Are you afraid of having to support it? It's bad for the business of programming because now customers expect to be able to find a free solution to every problem. (I see tweets like "is there any good FREE software for XYZ? or do I need to pay $20 for that".) It's also bad for customers because the free solutions eventually break (because of a new OS or what have you) and since it's free, the developer has no reason to fix it. Customers end up with free but stale software that no longer works and never gets updated. Customer cries. Developer still working day job cries in their cubicle. What gives? PS: I'm not looking to start an open-source/software should be free kind of debate. I'm talking about when developers make a closed source application and make it free.

    Read the article

  • Cannot access the filesystems using LiveCD (LVM2,EXT2)

    - by ftkg
    I have to restore the /etc/passwd file I accidentally renamed in my Ubuntu Server, so I booted the machine using a LiveCD. Problem is, the system filesystem does not appear in Nautilus, under 'Devices'. Am I missing anything? ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000956dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM ubuntu@ubuntu:~$ mount /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) ubuntu@ubuntu:~$ sudo blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="aad69790-198d-45bc-9ccd-e4cba7456914" TYPE="ext2" /dev/sda5: UUID="wbIDX7-RILL-VtFT-gX15-N1GJ-Yyfg-V8Oe5m" TYPE="LVM2_member" /dev/sr0: LABEL="Ubuntu 12.04 LTS i386" TYPE="iso9660" ubuntu@ubuntu:~$ cat /etc/fstab overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0

    Read the article

  • ArchBeat Link-o-Rama for 2012-09-12

    - by Bob Rhubart
    15 Lessons from 15 Years as a Software Architect | Ingo Rammer In this presentation from the GOTO Conference in Copenhagen, Ingo Rammer shares 15 tips regarding people, complexity and technology that he learned doing software architecture for 15 years. Adding a runtime picker to a taskflow parameter in WebCenter | Yannick Ongena Oracle ACE Yannick Ongena shows how to create an Oracle WebCenter popup to allow users to "select items or do more complex things." Oracle Identity Manager 11g R2 Catalog | Daniel Gralewski Oracle Fusion Middleware A-Team blogger Daniel Gralewski shares a detailed overview of the new Catalog feature, one of the most talked about features in the latest release of Oracle Identity Manager 11g. Cloud API and service designers, stop thinking small | Cloud Computing - InfoWorld "The focus must shift away from fine-grained APIs that provide some type of primitive service, such as pushing data to a block of storage or perhaps making a request to a cloud-rooted database," says InfoWorld's David Linthicum. "To go beyond primitives, you must understand how these services should be used in a much larger architectural context. In other words, you need to understand how businesses will employ these services to form real workplace solutions -- inside and outside the enterprise." Oracle Solaris 8 P2V with Oracle database 10.2 and ASM | Orgad Kimchi Orgad Kimchi's technical post illustrates the migration of "a Solaris 8 physical system, with Oracle database version 10.2.0.5 with ASM file-system located on a SAN storage, into a Solaris 8 branded zone inside a Solaris 10 guest domain on top of a Solaris 11 control domain." Thought for the Day "The hardest single part of building a software system is deciding precisely what to build. " — Fred Brooks Source: SoftwareQuotes.com

    Read the article

  • We are moving an Access based corporate front-end into a Web-based App

    - by Max Vernon
    We have an enterprise application with a front end written in Microsoft Access 2003 that has evolved over the past 6 years. The back end data, and a fair amount of back-end logic is contained within several Microsoft SQL Server databases. This front end app consists of around 180 forms, and over 120,000 lines of code, and interacts with VB.Net DLLs that support various critical functions used by our sales force. The current system makes use of 3 monitors to display various information; the Access app uses COM+ to control Microsoft Outlook and Internet Explorer for various purposes. The Access front end sometimes occupies 2 screens, automatically resizing itself based on Windows API-reported screen dimensions. The app also uses a Google map to present data to our agents, and allows two-way interactivity with the map through COM+ connectivity to JavaScript contained in the Google map. At the urging of senior management, we are looking to completely rewrite this application using some web-based technology, such as ASP.Net or perhaps a LAMP stack (the thinking with the LAMP stack thing is "free" is pretty cheap). We want to move to a web-based app so we can eliminate the dependency on our physical location for hiring new sales force members. Currently, our main office is full to capacity, and we need to continue growing the company. Does anyone have any thoughts on what would be the best technology to use for a web-based app of this magnitude? Keeping in mind the app is dependent on back-end services on our existing infrastructure. The app handles financial data and personal customer data, among other things. [I've looked at Best practices for moving large MS Access application towards .Net? and read the answers, and most of the comments. Interesting reading, and has some valid points, but our C.O.O. and contracted Software Architect are pushing for a full web-based app, not a .Net Windows App]

    Read the article

  • Case study: LOREX Technology Increases Website Traffic 90% with Oracle ATG

    - by Richard Lefebvre
    LOREX Technology Increases Website Traffic 90% by Enhancing the Online Customer Experience with a Flexible E-Commerce Platform LOREX Technology Inc. provides businesses and consumers with advanced video surveillance security products under the LOREX and Digimerge brands. LOREX, which caters to midsize business and consumer markets, is available in thousands of retail locations across North America. The Digimerge division sells its products through security system distributors in North America. Both brands concentrate on the sale of wired, wireless, and IP security surveillance and monitoring equipment, including cameras, digital video recorders, and all-in-one systems. LOREX conducted an extensive search for the right e-commerce platform to address its immediate need for a more intuitive shopping cart interface that could grow along with the company. After reviewing other solutions, including open source, LOREX chose Oracle ATG Web Commerce because it addressed every stage of the buying process and crossed all customer touch points, including the Web, contact center, mobile devices, social media, and its B2B partners’ physical stores. LOREX also found that Oracle ATG Web Commerce’s functionality was more robust than competing options, and it offered an attractive total cost of ownership. “Oracle ATG Web Commerce provided an optimal foundation to support rapid, scalable, long-term business growth while allowing full control of the platform,” said Sufi Khan Sulaiman, director, E-Commerce and Digital, LOREX. Read full story here  

    Read the article

  • Regulation of the software industry

    - by Flexo
    Every few years someone proposes tighter regulation for the software industry. This IEEE article has been getting some attention lately on the subject. If software engineers who write programs for systems that expose the public to physical or financial risk knew they would be tested on their competence, the thinking goes, it would reduce the flaws and failures in code—and maybe save a few lives in the bargain. I'm skeptical about the value and merit of this. To my mind it looks like a land grab by those that proposed it. The quote that clinches that for me is: The exam will test for basic knowledge, not mastery of subject matter because the big failures (e.g. THERAC-25) seem to be complex, subtle issues that "basic knowledge" would never be sufficient to prevent. Ignoring any local issues (such as existing protections of the title Engineer in some jurisdictions): The aims are noble - avoid the quacks/charlatans1 and make that distinction more obvious to those that buy their software. Can tighter regulation of the software industry ever achieve it's original goal? 1 Exactly as regulation of the medical profession was intended to do.

    Read the article

  • Creating, using and managing XML component dictionaries quick tutorials

    - by drrwebber
    XML Component Dictionary capabilities are provided in conjunction with the CAM Editor toolset.  These dictionaries accelerate the development of consistent XML information exchanges using standard sets of dictionary components. The quick tutorials are aimed at showing the 'how to' of the basic capabilities to jump start use of XML dictionaries with the CAM Editor. The collection of dictionary tutorials videos run for a total of approximately 20 minutes.  Each video can be reviewed individually also. Learn how to use the dictionary functions to create dictionaries by harvesting data model components from existing XSD schema, SQL database table schema, or simple Excel / Open Office spreadsheets with tables of components listed.Also included are tips and functions relating to use of NIEM exchange development, IEPD and EIEM techniques.These videos should be viewed in conjunction with reviewing the overall concepts and techniques described in the companion video on the CAM Editor and Dictionaries overview.  The approach is aligned with OASIS and Core Components Technical Specification (CCTS) standards specifications for XML components and dictionaries.Dictionary collections can be stored locally on the file system, or local network, or collaboratively on the web or cloud deployment, or can be shared and managed securely using the Oracle Enterprise Repository (OER) tool. Also included are techniques relating to the use of the NIEM approach for developing XML exchange schema and IEPD packages.  This includes generating reuse scores, wantlist, and cross reference spreadsheets. Included in the latest release of the CAM Editor is the ability to use the analyse dictionary tool to determine duplicate components, conflicting component definitions, missing component descriptions and so on.  This ensures high quality dictionary component specifications.  Using the CAM Editor you can also create MindMap models and UML physical models of your dictionary components sets. For a complete guide to using the CAM Editor see the main YouTube video tutorials website and the CAM Editor website.

    Read the article

  • Iterative and Incremental Principle Series 1: The Dreaded Assignment

    - by llowitz
    A few days ago, while making breakfast for my teenage son… he turned to me and happily exclaimed, “I really like how my high school Government class assigns our reading homework.  In middle school, we had to read a chapter each week.  Everyone dreaded it.  In high school, our teacher assigns us a section or two every day.  We still end up reading a chapter each week, but this way is so much easier and I’m actually remembered what I’ve read!” Wow!  Once I recovered from my initial shock that my high school son actually initiated conversation with me, it struck me that he was describing one of the five basic OUM principles -- Iterative and Incremental.   Not only did he describe how his teacher divided a week long assignment into daily increments, but he went on to communicate some of the major benefits of having shorter, more achievable milestones.  I started to think about other applications of the iterative and incremental approach and I realized that I had incorporated this approach when I recently rededicated myself to physical fitness.  Join me over the next four days as I present an Iterative and Incremental blog series where I relate my personal experience incorporating the iterative and incremental approach and the benefits that I achieved.

    Read the article

  • How to set up VirtualBox Bridged Network on Windows 7 Host?

    - by Tong Wang
    I have virtualbox running on a Windows 2008 server, with a guest running ubuntu 10.04. The ubuntu guest is given a static IP of 192.168.1.4, which also has openssh installed. The guest has bridged network setup, I can ping 192.168.1.4 from any machine in the LAN, the ubuntu guest can also access the LAN. However, when I try to PuTTY into the ubuntu machine, I always get "connection refused". Below are some setup details: ubuntu IP: 192.168.1.4 hosts.allow sshd : 192.168.1.38 hosts.deny ALL : ALL when I the following command, I can see that sshd is listening on port 22: lsof -i tcp:22 Any idea? EDIT: It turned out to be a wrong VirtualBox Bridged Network setup. I give the Ubuntu guest a static IP of 192.168.1.4 (assigned to eth0). Then in the Windows 7 host, in the Network and Sharing Center, there is a new connection named "VirtualBox Host-Only Network" after the bridge is setup, that connection is again given the same static IP of 192.168.1.4. Once I change the "VirtualBox Host-Only Network" to automatically obtain an IP address, it's getting a different IP address of 169.254.249.70(Tentative). And now I can SSH into 192.168.1.4 with no problem, even without touching hosts.allow and hosts.deny. I've also noticed that in the properties windows (see screenshot below) of the "VirtualBox Host-Only Network", the second checkbox, "VirtualBox Bridged Networking Driver" is unchecked. While the same checkbox of the physical NIC (that is bridged to) is checked. So my further question is: is this how VBox bridged networking supposed to be setup? Any rationale behind this? I'd appreciate if someone could provide some explaination on VBox bridged networking setup on Windows host and I'll accept it as an answer.

    Read the article

  • Restart and/or graphics problem in Ubuntu 12.04

    - by kara
    I having been using 12.04 for a couple of months now, with v. little problems. The other day I restarted my computer, and though I think it rebooted, the screen would be black. I could not even get a visual from a live cd. Finally, I was able to get it to load, but the resolution has been completely off. The computer thinks I have a laptop screen, when I actually have a ViewSonic VP2330wb, and it detects only two resolutions. And still, I have a problem with rebooting. If the screen locks after I leave it for a while, I can't get a visual back, and then when I force a shutdown, it takes 3 times for me to get a grub screen. Then I have to boot in recovery mode, and then finally in normal mode, but the screen is still always off. This is my video card: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fe000000-fe3fffff memory:d0000000-dfffffff ioport:f000(size=64) I am a new ubuntu user, and am at my wits end. Any help would be greatly appreciated.

    Read the article

  • Google+ Platform Office Hours for May 2nd, 2012: Hanging out with the Tabletop Forge team

    Google+ Platform Office Hours for May 2nd, 2012: Hanging out with the Tabletop Forge team This week we met with Charles Jaimet, Joshuha Owen and Fraser Cain of the Tabletop Forge team. They showed us their hangout app and shared their experience. Discussion this session on Google+: goo.gl You can learn more about our office hours here: goo.gl Here are some notable moments in this session: 1:50 - Charles explains Tabletop Forge 6:12 - Tabletop Forge Demo begins 7:45 - How do you prevent cheating on dice rolls? 14:07 - A discussion about trust in tabletop gaming 14:57 - Upcoming feature - Fog of war 24:06 - What are some challenges with the Hangouts API that you've overcome? 27:10 - It'd be cool to play a game with a separate on air game view 31:08 - Comments as a source of game material 31:58 - What else is on the roadmap for Tabletop Forge? 35:52 - Will there be a Kickstarter for Tabletop Forge? 36:42 - What do you think about saving game logs to places like Google Drive or Google Docs? 39:07 - The 7 sided die is not something possible in reality. In what other ways have you gone beyond the limits of the physical table top? 43:11 - What was your first game? From: GoogleDevelopers Views: 2401 23 ratings Time: 46:43 More in Science & Technology

    Read the article

  • Why is LSHW Only listing one of my two HDDs?

    - by Mark
    I have a 120GB HDD and a 1TB HDD in the system. I installed Ubuntu Server using LVM on the 120GB. After installation I added the 1TB to the existing volume group and added 10GB to /home as a test. My understanding is that lshw is supposed to list hardware. What's the difference here? mark@server:~$ sudo lshw -short -c disk H/W path Device Class Description ========================================================= /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/1/0.0.0 /dev/sdc disk SCSI Disk /0/1/0.0.1 /dev/sdd disk SCSI Disk /0/1/0.0.2 /dev/sde disk SCSI Disk /0/1/0.0.3 /dev/sdf disk SCSI Disk The 1TB only shows up as a volume, not as a disk. mark@server:~$ sudo lshw -short .... /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/0/1 /dev/sda1 volume 476MiB Linux filesystem partition /0/100/1f.2/0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/100/1f.2/0.0.0 /dev/sdb volume 931GiB WDC WD1001FALS-0 Thanks, Mark

    Read the article

  • Laptop runs HOT after 12.10 upgrade!

    - by dinkelk
    I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

    Read the article

  • What can I do to utilize all my hard disk space?

    - by Twatcher
    I had windows XP running on my computer. Then I installed Ubuntu from under windows. Then I decided I wanted to have only Ubuntu also because I got a system message that I am out of disk space. I loaded up my system from a live Ubuntu DVD and deleted the partition with windows on it and also the other partition that had my data on it. I expanded the partition which I thought to be the system partition (since there was no other partition left It had ext format. After that Ubuntu was working fine and I thought I have enough disk space, since my harddrive is an 80 GB ATA Maxtor. I left a small partition as backup. But after downloading a small amount of files I got the message again, that I am running out of disk space. I don't now. How can UI make my disk space bigger? I am not used to Ubuntu's file system, and I don't have the overview on how I can actually see how much space there is left for me to use. I have basically now 1 partition with the system on it and one small backup (as far as I understand). My system is (from system utility) Ubuntu 12.04 LS 3,9 GB Intel Core 2 2,4 Ghz 80 GB ATA Maxtor Here are the results for sudo fdisk -l Disk /dev/sda: 80.0 GB, 79998918144 bytes<br> 255 heads, 63 sectors/track, 9725 cylinders, total 156247887 sectors<br> Units = sectors of 1 * 512 = 512 bytes<br> Sector size (logical/physical): 512 bytes / 512 bytes<br> I/O size (minimum/optimal): 512 bytes / 512 bytes<br> Disk identifier: 0x41ab2316<br> Device Boot Start End Blocks Id System<br> /dev/sda1 * 63 123750399 61875168+ 7 HPFS/NTFS/exFAT<br> /dev/sda2 123750400 156246015 16247808 7 HPFS/NTFS/exFAT<br>

    Read the article

  • algorithm for Virtual Machine(VM) Consolidation in Cloud

    - by devansh dalal
    PROBLEM: We have N physical machines(PMs) each with ram Ri, cpu Ci and a set of currently scheduled VMs each with ram requirement ri and ci respectively Moving(Migrating) any VM from one PM to other has a cost associated which depends on its ram ri. A PM with no VMs is shut down to save power. Our target is to minimize the weighted sum of (N,migration cost) by migrating some VMs i.e. minimize the number of working PMs as well as not to degrade the service level due to excessive migrations. My Approach: Brute Force approach is choosing the minimum loaded PM and try to fit its VMs to other PMs by First Fit Decreasing algorithm or we can select the victim PMs and target PMs based on their loading level and shut down victims if possible by moving their VMs to targets. I tried this Greedy approach on the Data of Baadal(IIT-D cloud) but It isn't giving promising results. I have also tried to study the Ant colony optimization for dynamic VM consolidating but was unable to understand very much. I used the links. http://dumas.ccsd.cnrs.fr/docs/00/72/52/15/PDF/Esnault.pdf http://hal.archives-ouvertes.fr/docs/00/72/38/56/PDF/RR-8032.pdf Would anyone please explain the solution or suggest any new approach for better performance soon. Thanks in advance.

    Read the article

  • ksoftirqd uses 100% cpu

    - by andy
    I am running 32bit Ubuntu 10.04. A lot of the times ksoftirqd/0 or ksoftirqd/1 start using up 100% CPU for no apparent reason, and I am forced to reboot my laptop. Incidentally this also happens when I maximize my (youtube) videos on Chrome and Fireox, but once I un-maximize the videos the CPU usage goes down to the original levels. Any ideas what it going on? --- Addendum --- dmesg produces a ~2000 line output. I searched for 'error' and 'warning' in the output, and here are the relevant lines (along with some headers): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=157dcfda-acd6-4d1b-a6a8-ff9ccff61906 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210518] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error) [58673.134623] chrome[20101]: segfault at 7f38bc4ad000 ip 00007f38be769ecc sp 00007fff24616850 error 4 in libpepflashplayer.so[7f38bdc08000+e55000] [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error)

    Read the article

  • Modular Web App Network Architecture

    - by nairware
    Assuming that I am dealing with dedicated physical servers or VPSs, is it conceivable and does it make sense to have distinct servers setup with the following roles to host a web application? Reverse Proxy Web server Application server Database server Specific points of interest: I am confused how to even separate the web and application servers. My understanding was that such 3-tier architectures were feasible. It is unclear to me if the app server would reside directly between the web and database server, or if the web server could directly interact with the database as well. The app server could either do the computational heavy-lifting on behalf of the app server or it could do heavy-lifting plus control all of the business logic (as implied in the diagram above, thus denying the web server of direct database access). I am also unsure what role the reverse proxy (ex. nginx) could and should fulfill as a web server, given the above mentioned setup. I know that nginx has web server features. But I do not know if it makes sense to have the reverse proxy be its own VPS, given that the web server–in theory–would be separate from the app server.

    Read the article

  • Accessing second hard drive

    - by Jonathan
    So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

    Read the article

  • Disaster Recovery Example

    Previously, I use to work for a small internet company that sells dental plans online. Our primary focus concerning disaster prevention and recovery is on our corporate website and private intranet site. We had a multiphase disaster recovery plan that includes data redundancy, load balancing, and off-site monitoring. Data redundancy is a key aspect of our disaster recovery plan. The first phase of this is to replicate our data to multiple database servers and schedule daily backups of the databases that are stored off site. The next phase is the file replication of data amongst our web servers that are also backed up daily by our collocation. In addition to the files located on the server, files are also stored locally on development machines, and again backed up using version control software. Load balancing is another key aspect of our disaster recovery plan. Load balancing offers many benefits for our system, better performance, load distribution and increased availability. With our servers behind a load balancer our system has the ability to accept multiple requests simultaneously because the load is split between multiple servers. Plus if one server is slow or experiencing a failure the traffic is diverted amongst the other servers connected to the load balancer allowing the server to get back online. The final key to our disaster recovery plan is off-site monitoring that notifies all IT staff of any outages or errors on the main website encountered by the monitor. Messages are sent by email, voicemail, and SMS. According to Disasterrecovery.org, disaster recovery planning is the way companies successfully manage crises with minimal cost and effort and maximum speed compared to others that are forced to make decision out of desperation when disasters occur. In addition Sun Guard stated in 2009 that the first step in disaster recovery planning is to analyze company risks and factor in fixed costs for things like hardware, software, staffing and utilities, as well as indirect costs, such as floor space, power protection, physical and information security, and management. Also availability requirements need to be determined per application and system as well as the strategies for recovery.

    Read the article

  • How should I create a mutable, varied jtree with arbitrary/generic category nodes?

    - by Pureferret
    Please note: I don't want coding help here, I'm on Programmers for a reason. I want to improve my program planning/writing skills not (just) my understanding of Java. I'm trying to figure out how to make a tree which has an arbitrary category system, based on the skills listed for this LARP game here. My previous attempt had a bool for whether a skill was also a category. Trying to code around that was messy. Drawing out my tree I noticed that only my 'leaves' were skills and I'd labeled the others as categories. Explanation of tree: The Tree is 'born' with a set of hard coded highest level categories (Weapons, Physical and Mental, Medical etc.). Fro mthis the user needs to be able to add a skill. Ultimately they want to add 'One-handed Sword Specialisation' for instance. To do so you'd ideally click 'add' with Weapons selected and then select One-handed from a combobox, then click add again and enter a name in a text field. Then click add again to add a 'level' or 'tier' first proficiency, then specialisation. Of course if you want to buy a different skill it's completely different, which is what I'm having trouble getting my head around let alone programming in. What is a good system for describing this sort of tree in code? All the other JTree examples I've seen have some predictable pattern, and I don't want to have to code this all in 'literals'. Should I be using abstract classes? Interfaces? How can I make this sort of cluster of objects extensible when I add in other skills not listed above that behave differently? If there is not a good system to use, if there a good process for working out how to do this sort of thing?

    Read the article

  • How can I triple boot Xubuntu, Ubuntu and Windows?

    - by ag.restringere
    Triple Booting Xubuntu, Ubuntu and Windows I'm an avid Xubuntu (Ubuntu + XFCE) user but I also dual boot with Windows XP. I originally created 3 partitions and wanted to use the empty one as a storage volume but now I want to install Ubuntu 12.04 LTS (the one with Unity) to do advanced testing and packaging. Ideally I would love to keep these two totally separate as I had problems in the past with conflicts between Unity and XFCE. This way I could wipe the Ubuntu w/ Unity installation if there are problems and really mess around with it. My disk looks like this: /dev/sda1 -- Windows XP /dev/sda2 -- Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Device Boot Start End Blocks Id System /dev/sda1 * 63 78139454 39069696 7 HPFS/NTFS/exFAT /dev/sda2 78141440 156280831 39069696 83 Linux /dev/sda3 156282878 386533375 115125249 5 Extended /dev/sda4 386533376 390721535 2094080 82 Linux swap / Solaris /dev/sda5 156282880 386533375 115125248 83 Linux Keep each in it's own partition and totally separate and be able to select from each of the three systems from the GRUB boot menu... sda1 --- [Windows XP] sda2 --- [Ubuntu 12.04] "Unity" sda3(4,5) -- [Xubuntu 12.02] "Primary XFCE" What is the safest and easiest way to do this without messing my system up and requiring invasive activity?

    Read the article

  • I've inherited 200K lines of spaghetti code -- what now?

    - by kmote
    I hope this isn't too general of a question; I could really use some seasoned advice. I am newly employed as the sole "SW Engineer" in a fairly small shop of scientists who have spent the last 10-20 years cobbling together a vast code base. (It was written in a virtually obsolete language: G2 -- think Pascal with graphics). The program itself is a physical model of a complex chemical processing plant; the team that wrote it have incredibly deep domain knowledge but little or no formal training in programming fundamentals. They've recently learned some hard lessons about the consequences of non-existant configuration management. Their maintenance efforts are also greatly hampered by the vast accumulation of undocumented "sludge" in the code itself. I will spare you the "politics" of the situation (there's always politics!), but suffice to say, there is not a consensus of opinion about what is needed for the path ahead. They have asked me to begin presenting to the team some of the principles of modern software development. They want me to introduce some of the industry-standard practices and strategies regarding coding conventions, lifecycle management, high-level design patterns, and source control. Frankly, it's a fairly daunting task and I'm not sure where to begin. Initially, I'm inclined to tutor them in some of the central concepts of The Pragmatic Programmer, or Fowler's Refactoring ("Code Smells", etc). I also hope to introduce a number of Agile methodologies. But ultimately, to be effective, I think I'm going to need to hone in on 5-7 core fundamentals; in other words, what are the most important principles or practices that they can realistically start implementing that will give them the most "bang for the buck". So that's my question: What would you include in your list of the most effective strategies to help straighten out the spaghetti (and prevent it in the future)?

    Read the article

  • Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

    - by user1292548
    I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

    Read the article

  • How the OS Makes the Database Scream

    - by rickramsey
    source Few things are as satisfying as a screaming burnout. When Oracle Database engineers team up with Solaris engineers, they do a lot of them. Here are a few of the reasons why. Article: How the OS Makes the Database Fast - Oracle Solaris For applications that rely on Oracle Database, a high-performance operating system translates into faster transactions, better scalability to support more users, and the ability to support larger capacity databases. When deployed in virtualized environments, multiple Oracle Database servers can be consolidated on the same physical server. Ginny Henningsen describes what Oracle Solaris does to make the Oracle database run faster. Interview: Why Is The OS Still Relevant? In a world of increasing virtualization and growing interest in cloud services, why is the OS still relevant? Michael Palmeter, senior director of Oracle Solaris, explains why it's not only relevant, but essential for data centers that care about performance. Interview: An Engineer's Perspective: Why the OS Is Still Relevant Sysadmins are handling hundreds or perhaps thousands of VM's. What is it about Solaris that makes it such a good platform for managing those VM's? Liane Praza, senior engineer in the Solaris core engineering group provides an engineer's perspective. Interview in the Lab: How to Get the Performance Promised by Oracle's T5 SPARC Chips If you want your applications to run on the new SPARC T5/M5 chips, how do you make sure they use all that new performance? Don Kretsch, Senior Director of Engineering, explains. Interview: Why Oracle Database Engineering Uses Oracle Solaris Studio The design priorities for Oracle Solaris Studio are performance, observability, and productivity. Why this is good for ISV's and developers, and why it's so important to the Oracle database engineering team. Taped in Oct 2012. - Rick Follow me on: Blog | Facebook | Twitter | YouTube | The Great Peruvian Novel

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >