Search Results

Search found 2739 results on 110 pages for 'reader'.

Page 88/110 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• IP address from a MAC address

  - by acermate433s

  I'm writing a class to integrate a POS card reader device to our software. In order for it to work I must know what IP it's using. We were given some sample code by the service provider and the way they do this is they open a website (http://www.ebizchargeemv.com/getip.php?mac={MAC address of device}) and it would return the IP address of the device. The device I'm using is a POSLynx220 Mini. It has an ethernet port that connects to the internet to communicate with the service provider. I send TCP data to it and the device then controls a PIN pad that prompts a client to swipe his card. It's probably a mini computer that communicates with the service provider and uses the PIN pad as its input device. Just being curious but how did they implement this? Are they implementing it using ARP? I'm planning on not using their website to determine the IP of the device. I've seen some code that uses ARP but using executing ARP in one of the PC didn't detect the POS device.

  Read the article

• Google Chrome sync: limit for bookmarks & extensions?

  - by Lyubomyr Shaydariv

  Actually, Chrome is my favorite web-browser, and one of its most powerful features is synchronizing the actual data into a Google account. For the last years I gained a lot of bookmarks and from time to time browse the extensions gallery to find new valuable ones. Really, synchronizing between my work and home PC's freed me from manual sync. And for the recent months I experience strange glitches. I guess it may be caused by a lot of stored bookmarks (potentially about 3K [in estimate], but please don't ask why :)) and extensions (about 130 installed but only 10-15 daily used). I can mention the following strange things: Recently added bookmarks sometimes are not synchronized (e.g. I put a bookmark at work, but it's not guaranteed I can see it that evening), despite about:sync indicates a good sync process. Sometimes recently modified bookmarks appear in either (let's call) last at home or last at work bookmark folders. Sometimes bookmarks are not synced at all. (Moreover, Chromium versions may even crash) Extensions are not synced now at all. Perhaps, there's another reason, but Google Mail Checker and Google Reader Notifier do not show indicators of incoming e-mails and news. ... I'm not sure but it looks like I might exceed Chrome internal sync limits... Is it right? Are there any workarounds, or should I make a massive bookmarks/extensions cleanup (I really don't want it :()? I mostly use Google Chrome Canary builds, and the my current one is 12.0.732.0. Thanks in advance. Update #1 (2001-04-19): I removed about 50 extensions that I'm not interested in (or that I consider as trash), and gained pretty some results: The extensions count is below 100 (exactly 97); The chrome://extensions page does not get slow (or even frozen) any more on enabling/disabling/uninstalling extensions; The extensions are seem to be synchronized now again.

  Read the article

• How to embed Arial in PDF when PDF has Helvetica?

  - by Brooks Moses

  So, I've got a PDF file that's generated by a program that uses the Base 14 fonts, so that it contains "Helvetica" and "Times Roman". When I look at that in my copy of Acrobat 7.0 on Windows (for example), it shows these with Arial and Times New Roman. I'm fine with that. The issue is that I'd like to publish this PDF file on lulu.com, and they want all fonts embedded. Including the Base 14. I don't have a copy of Helvetica, so what seems the natural thing to do is substitute Arial for Helvetica and embed Arial. How can I do that? I tried using the Print feature in Acrobat (note: this is the full version, not Reader) to print to a PDF file using Adobe's "Print to PDF" printer driver, and selected the "Embed All Fonts" option in the print settings. This worked for the fonts that I had actual copies of, but instead of "printing" Arial for Helvetica -- which it would do if printing to a real printer -- it leaves all the Helvetica as Helvetica and doesn't embed it. Any suggestions for alternate ways to do this? What I really want is just a copy of my PDF file with ALL fonts embedded, and I'm quite happy if doing that means making one of the usual substitutions for the "Helvetica" that's in it. I'd be happiest if I can do that within Acrobat or other software that I have (pdftex, maybe?), but I'm willing to install another free utility if I need to.

  Read the article

• How do I increase the buffer size for domain sockets in OS X 10.6

  - by Chas. Owens

  In Linux I have no problem dumping tons of data into a domain socket, but the same code on OS X 10.6.2 blows up after about 65 records. The socket reader code looks like #!/usr/bin/perl use strict; use warnings; use IO::Socket; unlink "foo"; my $sock = IO::Socket::UNIX->new ( Local => 'foo', Type => SOCK_DGRAM, Timeout => 600, ) or die "Could not create socket: $!\n"; while (<$sock>) { chomp; print "[$_]\n"; } And the client code looks like #!/usr/bin/perl use strict; use warnings; use IO::Socket; my $sock = IO::Socket::UNIX->new ( Peer => 'foo', Type => SOCK_DGRAM, Timeout => 600, ) or die "Could not create socket: $!\n"; for my $i (1 .. 1_000_000) { print $sock "$i\n" or die $!; } close $sock; The error message I get is No buffer space available at write.pl line 15.. It seems fairly obvious that there is a difference in the buffer size between Linux and OS X, but I don't know how to set it OS X (or what the possible negative side effects might be).

  Read the article

• MicroSD card isn't detected by computer, apparently usable only with phone

  - by paulcjoubert

  I have a 4GB MicroSD card that apparently only works (in the sense that the device detects and can read and write from and to the card) with my old Nokia XpressMusic 5800 phone. I have taken pictures and recorded voice notes that were saved on the card. These are accessible after the card has been removed, which tells me that the problem isn't with the card. The card could also not be locked to the phone as it would at least be detected by a computer and it would be able to write raw data to it with dd, such as /dev/zero. Also, the card is not the Nokia card that came with the phone and I have done nothing that would have caused it to be locked. (I could not find anything on Nokia's website that helps, but then again... my search was not THAT thorough.) The card works on no other device that I have tried so far. I have tried it in my Canon camera (through an adapter), but it refuses to even boot with the card inserted. My card reader (via USB cable and hub) is detected as /dev/sdx with or without the card inserted. When trying to access the card I get an "No medium found". dmesg does not report any change at all when inserting and removing the card. I would obviously like to use my card on other devices - the phone is quite old - and even a likely explanation would help. Thankyou in advance! EDIT 1: I can use the card by connecting the phone to my computer, but this is impractical and would not allow me to use the card in any other device. EDIT 2: The data on the card is not important to me at all.

  Read the article

• How come my Intel 520 180GB SSD performs extremely poorly?

  - by Willem

  I recently installed a new Intel 520 series 180GB SSD in my brand new MacBook Pro. The system is as follows: Model: MacBook Pro 15-inch, Late 2011 (MacBookPro8,2) Processor: 2.4 GHz Intel Core i7 Memory: 16 GB 1333 MHz DDR3 Graphics: AMD Radeon HD 6770M 1024 MB Software: Mac OS X Lion 10.7.3 Main Drive Bay: Intel 520-series 180GB SATA-3 (6GB/s negotiated link) SSD (Firmware: 400i) [80GB free] Optical Bay: Toshiba 5400 RPM 750GB SATA-2 HDD Trim: Enabled (according to Trim Enabler App) And here are the speeds I'm getting: Read: 412 MB/s Write: 186 MB/s What have I done wrong? Results expected: Read/write both 500MB/s I have seen benchmarks with lesser SSD:s (SATA-2 even) outperform my write-speeds by far. Also, Intel 520 SSD:s are supposed to be the top class of SSD:s. Trim Enabler report: This looks a bit odd compared to screenshots from their site: These is the defined S.M.A.R.T attributes (taken from Intel): And here are my S.M.A.R.T attributes read using smartctl tool from smartmontools: They don't seem very compatible. I'm going to try and look for a S.M.A.R.T attributes reader tool for OS X which might support Intel 520 series.

  Read the article

• openSSL tutorial not fully working - Can sign but cannot restore original file

  - by djechelon

  I'm writing, and testing, a little tutorial for my groupmates involved in an openSSL homework. We have a bunch of PDF files, I'm the CA and each one should send me a signed PDF for me to be verified. I've told them to do the following (and tried to do it by myself) Request and obtain a certificate (I'll skip this part) Create a MIME message with the PDF file in it makemime -c "text/pdf" -a "Content-Disposition: attachment; filename=”Elaborato.pdf" Elaborato.pdf > Elaborato.pdf.msg Sign with openSSL openssl smime -sign -in Elaborato.pdf.msg -out Elaborato.pdf.p7m -certfile ca.pem -certfile nomegruppo.crt -inkey nomegruppo.key -signer nomegruppo.crt Verify with openssl smime -verify -in Elaborato.pdf.p7m -out Elaborato-verified.msg -CAfile ca.pem -signer nomegruppo.crt Extract attachment with munpack Elaborato-verified.msg View with Acrobat Reader The problem is that even if I get a file that (from its binary content) resembles a PDF file my current Ubuntu PDF viewer doesn't read it. The XXXElaborato.pdf extracted by munpack is a little bit smaller than the original. What's the problem with this procedure? In theory, they should send me the signed S/MIME message and I should be able to read the PDF within it. Why can't I restore the original content of the PDF file?

  Read the article

• What is the replacement of the floppy

  - by alexanderpas

  While CD (and to an lesser extend DVD) disks have reached the price-point of the floppy, they have one significant downside, it is WORM (Write-Once Read-Many) media, allowing it to be used only one single time, and you need to be explicit in writing the data to the actual media (you need to burn it.) While CD-RW solves the "use only once" problem, it is still EWORM (Erasable Write-Once Read-Many) media, which still means you need to be explicit in writing the data to the actual media (you still need to burn it.), and also, you still need to be very explicit in erasing it. (simple delete is not possible.) Okay, we can use a CD-RW in Packet Writing mode, however the downside to that, is that this mode is not very universal, and also, not the native mode of the media. Now, while USB-sticks and SD-cards may not have the poblems of the CD, they have a whole other kind of problem: their PRICE! USB-sticks and SD cards are generally 10 to 100 times as expensive as diskettes per piece. SD-cards, in addition have an added problem, because they need a reader to operate. While it is a very standard thing, it is not default equipment on the computer like the CD drive or USB port (or historically the diskette drive). You wouldn't give out an USB stick or SD card with a 100 kB text file, not caring weither you would get it back or not. So, to recap: CD & DVD are basically WORM media. SD cards and USB sticks are relatively expensive. SD cards also needs special readers. Diskettes have a very low data-rate Diskettes have a very low storage capacity. Now, is there a media out there that solves all these problems, or is there a way to get (very) small USB sticks or SD cards for a very low price (as they're the closest thing to diskette).

  Read the article

• Windows 7 Printing Issue

  - by Adrian Godong

  I am using Windows 7 RTM x64. From Control Panel Devices and Printers, I have three printers listed; Fax, XPS Writer, and a Lexmark. I can print a test page through the printer properties with no problem. I can print a text file from Notepad with no problem. I can't print from Safari. When I press Ctrl+P, it displays the Print dialog, press OK and nothing happened. I can't print from Adobe Reader. When I press Ctrl+P, it complains that it there is no printer installed. I can't print from Office applications. When I press Ctrl+P, it crashes immediately. Running Office Diagnostics does not help. I can't print from IE8. When I press Ctrl+P, it displays the Print dialog, complains that I have to select a printer from the list, selected any of the three printers, the Print button is disabled. Any help? Update (01/11/2009): The default printer is the Lexmark. I'm testing on this one as well. I was about to reinstall Office (as this is the first application that has the problem), but then I tried other, some behave similarly but not identical (maybe caused by different printing implementation). On those applications that is able to display printer selection dialog, I tried the Lexmark and XPS. Neither printed anything (paper for Lexmark, file for XPS). Update (01/12/2009): It seems that my Windows installation is botched. A colleague have similar hardware/software combination (it's the same workstation model and Windows 7 x64) and his can print perfectly fine. I tried adding the printer from his share, no joy. I can test print from the printer property, I can print from Notepad, but not from any other application.

  Read the article

• Best way to integrate applications to windows 7 install.wim image

  - by cyph3r

  I have right now an unmodified .iso of a windows 7 32bit and 64bit installation disk. And I need to integrate to that some applications (office, adobe reader etc) and windows updates so that when windows are installed the above applications/updates are already installed and working. Requirements: My output has to be a install.wim image containing the new/improved windows installation files because the deployment is done via a pxe server and a custom windowsPE enviroment. The procedure to create the install.wim has to be as automatic as possible. I can't create it manually every time I want to incorporate a new windows or application update to the image. The image will be installed on 100+ computers so it needs to be 'generic'. I've never done something like this before but from what I searched a possible solution to this issue would be: To create a reference installation (preferably on a vm so I can take snapshots) complete with its applications/updates/settings. After the complete setup I take a snapshot of the installation Run C:\Windows\System32\sysprep\sysprep.exe /oobe /generalize /shutdown to sysprep the machine. Boot to a WindowsPE enviroment and capture the .wim image using gimagex. Deploy the .wim and enjoy the rapid installation times. :D Does that sound ok? Would you recommend anything else? Right now the applications are installed after the installation of windows is complete. So the total installation time is quite long. That's why I need a different approach.

  Read the article

• How can I batch convert SVG files containing text to PDF files (specifically on CentOS 5.3 x86_64)?

  - by molecules

  I would like to programatically convert SVG files to PDF files. However, the SVG files contain text that must be searchable in the generated PDF files. Also, it has to work on Red Hat Enterprise Linux 5.3 or CentOS 5.3 for the x86_64 architecture. It would be nice if it were Open Source or at least not very expensive. Here is what I've tried. All of these, except Batik, work fine on Debian Lenny. Inkscape I can get it installed using autopackages from http://inkscape.modevia.com/ap, but when I use it from the command line, the text is not searchable. Batik rasterizer [sic] When it converts SVG files to PDF files, the text is no longer searchable. svg2pdf The source for this and several of its dependencies are available to download. I have been trying to get it to compile on CentOS, but haven't had success yet. I found a precompiled version for Debian x86_64, but it doesn't work on CentOS. rsvg-convert Generated PDF isn't searchable on CentOS 5.3. Perhaps installing a newer version of cairo would help. Thanks to DaveParillo for mentioning rsvg-convert (on superuser). SOLUTION (but perhaps some of the above will still be useful to the reader) princeXML It works fine on CentOS when installed from source. For some reason it doesn't work when installed from the .rpm. Thanks Erik Dahlström! (provided solution that worked for my case on stackoverflow) Cross posted on stackoverflow

  Read the article

• How do I increase the buffer size for domain sockets in OS X 10.6

  - by Chas. Owens

  In Linux I have no problem dumping tons of data into a domain socket, but the same code on OS X 10.6.2 blows up after about 65 records. The socket reader code looks like #!/usr/bin/perl use strict; use warnings; use IO::Socket; unlink "foo"; my $sock = IO::Socket::UNIX->new ( Local => 'foo', Type => SOCK_DGRAM, Timeout => 600, ) or die "Could not create socket: $!\n"; while (<$sock>) { chomp; print "[$_]\n"; } And the client code looks like #!/usr/bin/perl use strict; use warnings; use IO::Socket; my $sock = IO::Socket::UNIX->new ( Peer => 'foo', Type => SOCK_DGRAM, Timeout => 600, ) or die "Could not create socket: $!\n"; for my $i (1 .. 1_000_000) { print $sock "$i\n" or die $!; } close $sock; The error message I get is No buffer space available at write.pl line 15.. It seems fairly obvious that there is a difference in the buffer size between Linux and OS X, but I don't know how to set it OS X (or what the possible negative side effects might be).

  Read the article

• New to building computers worried about temps

  - by dave

  I'm new to building my own computers and I was wondering about maximum temperatures. I understand that the room temp can affect the computers temp but how relevent is it? I understand that if my room temp is 20°C none of my computer parts could be lower than that. But if my room is 27°C instead of 20°C would this cause my computers parts to heat up more/faster? My new computer I built myself for gaming is i7 2600k 16gb ram ddr3 1600 hd6970 2 gb 240gb ssd ( bought a nas with 3 2tb drives in raid 5 for my home network ) 850w modular psu I also have my old hp computer i3 2120 8gb ram hd6770 1tb hdd I also have 3 laptops in my household, but I am not worried about their temps, they heat up my legs but they are never under stress. Due to size and money reasons I used an old case and it only has one of the sides left on it. Is this bad for the computer and will the extra dust cause problems? Or should I leave it this way or take the missus wrath and buy a case? If so is there any certain case I should get? I don't care about looks I just want card reader and usb slots and for it to run as cool or cooler than now, my case has 1 fan. Also what are the max temps for my new and old computer parts? Is 40°C under load ok for my CPU, what about 70°C for my GPU is that ok too, or should I worry? What are normal and safe temps for my components? I have looked around but there seem to be lots of different answers. I know that 100°C is bad but I want my parts to last as long as possible and this site always seems to give good replies without arguing or flaming.

  Read the article

• "could not find suitable fingerprints matched to available hardware" error

  - by Alex

  I have a thinkpad t61 with a UPEK fingerprint reader. I'm running ubuntu 9.10, with fprint installed. Everything works fine (I am able to swipe my fingerprint to authenticate any permission dialogues or "sudo" prompts successfully) except for actually logging onto my laptop when I boot up or end my session. I receive an error below the gnome login that says "Could not locate any suitable fingerprints matched to available hardware." What is causing this? here are the contents of /etc/pam.d/common-auth file # # /etc/pam.d/common-auth - authentication settings common to all services # # This file is included from other service-specific PAM config files, # and should contain a list of the authentication modules that define # the central authentication scheme for use on the system # (e.g., /etc/shadow, LDAP, Kerberos, etc.). The default is to use the # traditional Unix authentication mechanisms. # # As of pam 1.0.1-6, this file is managed by pam-auth-update by default. # To take advantage of this, it is recommended that you configure any # local modules either before or after the default block, and use # pam-auth-update to manage selection of other modules. See # pam-auth-update(8) for details. # here are the per-package modules (the "Primary" block) auth sufficient pam_fprint.so auth [success=1 default=ignore] pam_unix.so nullok_secure # here's the fallback if no module succeeds auth requisite pam_deny.so # prime the stack with a positive return value if there isn't one already; # this avoids us returning an error just because nothing sets a success code # since the modules above will each just jump around auth required pam_permit.so # and here are more per-package modules (the "Additional" block) auth optional pam_ecryptfs.so unwrap # end of pam-auth-update config #auth sufficient pam_fprint.so #auth required pam_unix.so nullok_secure

  Read the article

• Converting PDF eBooks into a Kindle format

  - by Ender

  Over the past couple of years I've amassed quite a collection of guides, tutorials and ebooks in PDF format. A lot of these are quite useful for work, especially PDF documentation, and rather than have to be at a computer every time I want to read how to do something in Sitecore or to read through a software testing ebook I'd like to do it on my brand-spanking-new Kindle. However, even though there is now a native PDF reader on the Kindle due to the nature of PDF's they are practically unreadable. The text doesn't wrap due to how PDF's are sized and so far after a bunch of Google searches I've yet to find a viable solution to get my PDF's converted into a readable Kindle format. Sometimes these books have code or pictures/tables in them, but most of the time they're text-heavy and to be honest I'd be surprised if there wasn't a free tool to handle the converting of PDF to one of the (seemingly many) Kindle formats. So, can anyone help me out with this? EDIT: I've tried Calibre, and have checked their forums to play with some of the advanced settings, yet the solutions available seem to be extremely poor, especially if the book you're attempting to read contains equations, code, or anything outside of plain text. I've also tried Amazon's conversion service, which wasn't much help with such documents. The best way I have found so far is to build the entire thing over again in ePub or RTF format and convert to MOBI from there. This works for text-heavy books with tables, but anything technical still isn't covered. Can anyone help with this?

  Read the article

• Disable Certain Firefox Plugins System-wide by Default

  - by Andrew Case

  I have firefox installed system-wide for all our users. Unfortunately the Adobe Reader Plug-in is rather flakey and doesn't work some of the time. As a result I want to disable the plug-in by default for all our users, but still allow them to enable it if they want via the standard Tools-Add-ons-Plug-ins menu option. How can I have this plug-ins enabled/disabled status be disabled by default? I've been able to configure system-wide configurations before by setting preferences in the mozilla root folder file defaults/pref/all.js, but enabled/disabled plugins doesn't appear to be configured in the preferences. [edit 1]: I found 'How to manage firefox plugins in pluginreg.dat file' which explained some of the formatting of the pluginreg.dat file. From there I could see flags are masked as follows (from nsPluginHostImpl.h): #define NS_PLUGIN_FLAG_ENABLED 0x0001 // is this plugin enabled? #define NS_PLUGIN_FLAG_OLDSCHOOL 0x0002 // is this a pre-xpcom plugin? #define NS_PLUGIN_FLAG_FROMCACHE 0x0004 // this plugintag info was loaded from cache #define NS_PLUGIN_FLAG_UNWANTED 0x0008 // this is an unwanted plugin #define NS_PLUGIN_FLAG_BLOCKLISTED 0x0010 // this is a blocklisted plugin But is there a way to add this to the defaults so that that NS_PLUGIN_FLAG_ENABLED is removed by default?

  Read the article

• Imagemagick convert creates monochrome output only

  - by rumtscho

  I have a book scan as a pdf. When I open it with Adobe Reader, it looks like grayscale. When I open it with IrfanView, it looks like grayscale, and the Information option tells me that the image is actually 24 bit (I don't know if this is the real bit depth of the image embedded in the pdf or if IrfanView assigns the maximal depth when opening a pdf as image). I want to OCR the scan with OmniPage SE. It doesn't read PDF, so I decided to use ImageMagick to convert the file to PNG first. But no matter what I try, the output is always monochrome and practically unreadable. I tried different conversion lines, with different depth, density and resize values, but it didn't help. What you see was made with the options convert testfile.pdf -density 600x600 -depth 8 PNG:testfile.png. Any idea what causes the problem? Edit: To make it clear, the output looks like this for any value of -density, -depth and -resize I have tried. It also looks like that when I use no options at all, as in convert testfile.pdf PNG:testfile.png.

  Read the article

• Create a PDF that defaults to flip on short edge when printed double-sided

  - by user568458

  We're creating a 2-page PDF brochure with a target audience who will print it on their regular office or home printers. If it is printed on a double-sided printer (common in offices), it'll come out correctly if set manually by the user to "Flip on short edge", but will come out with the second page upside down if default settings are used (flip on long edge). Our target audience aren't very tech-literate, and we've found that even within our own office network there is variation in the location of the 'Flip on short edge' setting - so it isn't realistic to give everyone who downloads the PDF instructions on how to change this setting or to expect everyone to find out how to change the setting off their own backs. So, when creating a PDF (ideally using Adobe InDesign or Acrobat, but if other software or hacking is needed that's fine...), is there a way to configure the PDF file itself so that when printed double-sided with default settings, it flips on the short edge? If possible, it'll be useful supplementary info to know how reliable any such methods are across different PDF readers (e.g. Adobe Reader, Acrobat, Mac Preview, inbuilt browser readers (e.g. chrome), FoxIt, etc). If questions about content creation like this aren't a great fit here, feel free to migrate it to the graphic design stackexchange site - this question seems to fall half way between the two sites

  Read the article

• What could cause Windows 7 to hang whenever I install something?

  - by Larsenal

  I've had this problem when installing several different programs (iTunes, Adobe Acrobat Reader just to name two). Regardless of what the program is, the install usually gets at least 90% through the process and then just hangs. I don't see anything bad in the event log besides the following (and this didn't occur exactly at the time of install): wuaueng.dll (964) SUS20ClientDataStore: A request to write to the file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" at offset 16252928 (0x0000000000f80000) for 32768 (0x00008000) bytes succeeded, but took an abnormally long time (185 seconds) to be serviced by the OS. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. I've run check disk and it passed. I've had some problems with BIOS settings in the past with Windows 7, but I'm not sure whether that could be related. Update... I also see this error in the event log: Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005, Access is denied. . This is often caused by incorrect security settings in either the writer or requestor process. Operation: Gathering Writer Data Context: Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220} Writer Name: System Writer Writer Instance ID: {33493f01-ac1b-4efb-a378-3053ab03100d} One last wrinkle.... I see "Previous versions" of c:\ which look like they correspond to the time of attempted installation.

  Read the article

• Print over remote CUPS server, but just show a subset of the printers.

  - by jdm

  I'd like to print from my Ubuntu laptop (karmic) to some networked printers. Our organisation uses a CUPS server with several hundred printers. What I know I can do is: CUPS_SERVER=printers.company.com acroread document.pdf and then Adobe Reader shows me all available printers to select from. However, it takes a couple of minutes to display the large list, which is really annoying. (The desktop PCs here suffer from this, too.) The other option is to add a new printer with an address like ipp://printers.company.com/printer/bldg1_hp8150 (to the Ubuntu printer configuration = local CUPS server). However, it asks me for a driver. I don't want to / can't always specify a driver, since some printers don't appear in the list. I'd like to let the remote CUPS server handle the driver part (like it does when i set CUPS_SERVER), and do no more preprocessing/"driver stuff" on my side. The ideal thing would be if I could somehow add the remote printer list to my local cups server, and apply a filter, so that it would just display printers a la bldg1_*. This feature was available in KDE3.?, but I can't find something similar in Ubuntu/Gnome. Any suggestions?

  Read the article

• need to bring back win 7

  - by user290513

  I like making music and playing games and occasionally do some Photoshop. I had a windows 8 computer but my mouse pointer always got stuck, so to try out something new I installed Ubuntu. here is how I installed it: Went to advanced statup options clicked on "use a device" after plugging in my bootable USB with Ubuntu replaced my windows 8 and installed Ubuntu 14.04 LTS I hope I did it correctly though. So after a few months I could've really find out a good Audio Production (not LMMS, because I use Stagelight) software nor something that could be familiar to the UI of Photoshop. So I decided to bring back Windows, but because of the bad experience of 8 I thought about bringing back win 7 So I used an app named WinUSB to make my bootable USB drive after formatting it to NTFS in GParted But when I go to my grub menu, my USB doesn't show up and my PC being a UEFI device. I don't know how to get to the bios of my device. Can somebody tell how to install Windows 7 completely and deleting Ubuntu or at least give me a link to a tutorial. I have a netbook: it is an Acer Aspire One 725. I'm fine with using commands in terminal and another thing that my laptop doesn't have a CD drive or reader, I can't put a CD inside

  Read the article

• Google 2-step verification: Should my phone know my password? [closed]

  - by Sir Code-A-Lot

  Hi, Just enabled 2-step verification for my Google account. I have installed Google Authenticator on my Android phone, and I set up an application specific password for the Google account associated on my phone. This works great when just using installed apps like Gmail, Calendar and Google Reader. But if I want to access Google Docs, Google Tasks or any other website that requires a Google login, I don't seem to be able to use a application specific password. I have to use my real password and then use Google Authenticator to make a code for the next step. This means if my phone is stolen, revoking the password to my phone is pointless. The phone have already been verified, and all that is needed is my password, which the phones browser will have remembered. I realize that I can take measures to ensure the phones browser doesn't remember my password, but that's just not convenient at all. Am I missing something, or is there no elegant solution to this? Should I just let my phone know my real password? As I see it, being able to login with application specific passwords on websites (which apparently isn't possible) is the only way I can revoke my phones access in a meaningful way.

  Read the article

• How does one debug Windows network share authentication?

  - by ajs410

  I have machine0 with 32-bit Vista, logged in as a domain user, running a VMWare image of 32-bit Vista, logged in as a local user, with the VM set to bridge the network. From an administrator account (called admin) within the VM, I try to access the hidden C$ share on machine0 (i.e. start - run - "\\machine0\C$\"). I get no prompts for credentials. Worse, machine0 has an admin account (different password), and machine0\admin gets locked out when VM\admin tries to access the network share. I get a message several seconds later, which feels like a cached credential failure leading to the lockout. I have checked several places for cached credentials; net use, Stored Usernames and Passwords, mapped shares. I rebooted (both machine0 and VM) to make sure the session was clear of any cached credentials. I can force net use to use my domain credentials when accessing machine0, and then I can see the share. I can also see shares that do not require credentials. I decided to try another machine on the network (machine1), 64-bit Vista, local user. This machine has no lockout policy, and after several seconds (feels like failed cached credentials again) it prompts me for credentials. After I enter them, it re-prompts me, saying "logon unsuccessful" (tried my domain credentials, and also machine1\admin's). Which is bogus, because I proceed to log on with remote desktop using the machine1\admin credentials. I have tried this on another machine (machine2, 64-bit Vista), running a copy of the same 32-bit VM, and I don't remember having this problem. machine0 has a fingerprint reader...could that try storing passwords and interfere? Are there any places I'm missing where there could be cached credentials? Is there a way to see what credentials are flying around when I try to connect?

  Read the article

• Printing a PDF results in garbled text (sometimes)

  - by Scott Whitlock

  We have a system that renders a report as a PDF, and displays it in the browser for the user. In the browser, the document always appears to display fine, but when printed on one machine, it sometimes changes some of the data in the report to seemingly random characters. Here are some examples of the strings it inserts: Ebuf; Bvhvt ul1: -!3122 Ti jqqf e!Wjb; Nfttf ohf s!Tf swjdf Additionally, the inter-character spacing is weird. It sometimes writes characters overlapping each other. I noticed some repetition in the garbled text, so I typed a few of them into Google, and surprisingly got a lot of hits. Here is the string I searched for: pdf cjmp ebuf nftf up! The Google search summaries contain the garbled text. However, when I click on those links in Google, I get perfectly readable PDF files. It's as if Google's PDF crawler has the same bug. Has anyone figured this out? Is this an Acrobat Reader bug?

  Read the article

• Why does the Mac OS X firewall dialog recurringly pop-up and disappear by itself (without letting me

  - by Chris W. Rea

  From time to time, I'll be on my Macbook using a program that accesses the network – whether Firefox, or Sony's Reader Library – really, it seems like it could happen with any program that accesses the network – and for no reason that I can discern so far (that is, it happens intermittently) the OS X firewall dialog pops up to ask me the question: Except it doesn't actually let me click anything before it disappears! That is: the dialog pops up, ... then goes away by itself a second later, then pops up again, ... then goes away by itself a second later, etc. It happens a few times before stopping. It wouldn't be so maddening to be interrupted if I could just be allowed to click "Allow" and make the darn thing go away for good. In Security preferences I have the firewall turned "On", and I would like to keep it that way. Has anybody seen this problem, found the source, and figured out a solution or workaround? Thank you.

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >