Search Results

Search found 3325 results on 133 pages for 'route'.

Page 88/133 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

  - by milkandtang

  I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

  Read the article

• CentOS Client - Unable to Establish iSCSI connection with multiple interfaces on the initiator

  - by slashdot

  So after upgrading to CentOS 6.2, I am seemingly no longer able to login into my iSCSI targets. I have multiple interfaces on different subnets on the system, and I first thought that it had to do with the fact that I may not be binding correct interfaces, which seems to be the case when looking at netstat, as this is clearly wrong: [root]? netstat -na|grep .90 tcp 0 1 10.10.100.60:42354 10.10.8.90:3260 SYN_SENT tcp 0 1 10.10.100.60:40777 10.10.9.90:3260 SYN_SENT I then went ahead and disabled all but one interface, and so as a result netstat appears to be correct, but the issue with login remains. I am positive that the target never sees a packet, because I see nothing by SYN_SENT. I know the problem is on my client, because the target is servicing multiple systems, none of which are CentOS 6.2. At this point I am pretty confident that some things changed between CentOS 6.0/6.1 and 6.2. So, if anyone have any thoughts, or ran into this, I would very much like to hear your thoughts. [root]? iscsiadm --mode node --targetname iqn.2011-12.dom.homer:01:lab-centos-servers-00001 --portal 10.10.8.90:3260,2 --interface=sw-iscsi-0 --login Logging in to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260] (multiple) iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals [root]? netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2.7 10.10.9.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3.7 10.10.100.0 0.0.0.0 255.255.252.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2.7 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3.7 0.0.0.0 10.10.100.1 0.0.0.0 UG 0 0 0 eth0 Output of ip addr show for the two interfaces involved: [root]? for i in 2.7 3.7; do ip addr show eth$i; done 6: eth2.7@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:8d brd ff:ff:ff:ff:ff:ff inet 10.10.8.60/24 brd 10.10.8.255 scope global eth2.7 inet6 fe80::20c:29ff:fe94:5b8d/64 scope link valid_lft forever preferred_lft forever 7: eth3.7@eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:97 brd ff:ff:ff:ff:ff:ff inet 10.10.9.60/24 brd 10.10.9.255 scope global eth3.7 inet6 fe80::20c:29ff:fe94:5b97/64 scope link valid_lft forever preferred_lft forever Update 01/06/2012: This issue is getting even more interesting by the day it seems. I went a few weeks back and grabbed a snapshot of this system from before upgrading to 6.2. I spun up a new system from the snapshot, and reconfigured interface info and host keys, as well as iSCSI initiator and iscsi interface info to match new MACs. Changed nothing else. Then, I attempted to connect to my targets, and no issues at all. I cannot say that this was unexpected. I then went ahead and compared sysctl settings from both systems and there were differences after the upgrade, but nothing seemingly relevant to iSCSI or IP that could contribute to this. I also noticed that by default now two sessions per connection were enabled after the upgrade, but I changed it back to 1 session in /etc/iscsi/iscsid.conf. On the problematic system we can see that source interface is seemingly wrong, but even when I disable the 10.10.100 interface, problems persist. So, while this may be relevant, I could not validate it for certain. Needless to say, further research is necessary. Something is clearly different between releases. Working system is on 6.1, and non-working is 6.2. ::Working System:: tcp 0 0 10.10.8.210:39566 10.10.8.90:3260 ESTABLISHED tcp 0 0 10.10.9.210:46518 10.10.9.90:3260 ESTABLISHED [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.210 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.210 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.210 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 ::Non-working System:: tcp 0 1 10.10.100.60:44737 10.10.9.90:3260 SYN_SENT tcp 0 1 10.10.100.60:55479 10.10.8.90:3260 SYN_SENT [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.60 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.60 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.60 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 And the result is still same: [root]? iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not login to [iface: sw-iscsi-1, target: iqn.2011-12.dom.homer:02:lab-centos-servers-00001, portal: 10.10.9.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals Update 01/08/2012: I believe I have been able to figure out the answer to my issue. It is quite obscure and I doubt this will happen to anyone else any time soon. It turns out that setting iface.iscsi_ifacename and iface.hwaddress in the interfaces configuration file is not legal. When one manually adds an iscsi target, such as below, all settings from the interface config file are copied into the node config file, that gets created by the below command. Result is parameters iface.iscsi_ifacename and iface.hwaddress together in the same config file. These parameters are seemingly mutually exclusive, which does not exactly make sense, or there is perhaps an oversight in the codepath. Perhaps I will investigate further. # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:01:lab-centos-servers-00001 -p 10.10.8.90,3260,2 -I sw-iscsi-0 # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:02:lab-centos-servers-00001 -p 10.10.9.90,3260,2 -I sw-iscsi-1 Notice, below I commented out iface.hwaddress and iface.ipaddress, after which I re-added targets, with same command as above. All works just fine. [root]? cat * # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-0 iface.net_ifacename = eth2.6 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.8.60 iface.transport_name = tcp iface.vlan_id = 6 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-1 iface.net_ifacename = eth3.7 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.9.60 iface.transport_name = tcp iface.vlan_id = 7 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD Again, chances of this happening to someone else are slim to none, so likely waste of time typing this up. But, if someone does encounter this issue, I hope this post will help.

  Read the article

• how to rest my app to support mobile phone

  - by qichunren

  I am now going to develop a mobile website both support common html format page and wml format page(Because now a usual web browser on mobile can view html page and some old mobiles only support wml ) First step: register content type for wml page config/initializers/mime_types.rb Mime::Type.register_alias "text/vnd.wap.wml", :wml Second: Create two format page for an action in view: class WelcomeController < ApplicationController def index @latest_on_sale_auctions = Auction.latest(15) respond_to do |format| format.html format.wml end end end It works well as I visit: http://localhost:3000/welcome But got: Routing Error No route matches "/welcome.wml" with {:method=:get} as I visit:http://localhost:3000/welcome.wml and it works well as I visit:http://localhost:3000/welcome?format=wml my config/routes.rb like this: ActionController::Routing::Routes.draw do |map| map.root :controller => "welcome" map.connect ':controller/:action/:id' map.connect ':controller/:action/:id.:format' end My rails version is 2.3.5,please help me, I want a restful app,both support html and wml.

  Read the article

• Way to turn on keyboard's caps-lock light without actually turning on caps-lock?

  - by cksubs

  I'm writing a program that uses caps-lock as a toggle switch. It would be nice to set the LED of the key to show that my program is on or off, like the capslock key does naturally. I know that I could just SendInput('Capslock'); or whatever to actually turn caps-lock on and off. But my app is a typing program, and I don't want to have to deal with translating the all-caps keys that turning it on would give me into their lower/upper cases. I might go that route eventually, but not for this version. I would however be interested in just turning on the LED light WITHOUT actually turning on caps-lock. Is there any way to do that? Thank you.

  Read the article

• Drawing triangle/arrow on a line with CGContext

  - by Pete

  Hi, I am using the framework of route-me for working with locations. In this code the path between two markers(points) will be drawn as a line. My Question: "What code should I add if I want to add an arrow in the middle(or top) of the line, so that it points the direction" Thanks - (void)drawInContext:(CGContextRef)theContext { renderedScale = [contents metersPerPixel]; float scale = 1.0f / [contents metersPerPixel]; float scaledLineWidth = lineWidth; if(!scaleLineWidth) { scaledLineWidth *= renderedScale; } //NSLog(@"line width = %f, content scale = %f", scaledLineWidth, renderedScale); CGContextScaleCTM(theContext, scale, scale); CGContextBeginPath(theContext); CGContextAddPath(theContext, path); CGContextSetLineWidth(theContext, scaledLineWidth); CGContextSetStrokeColorWithColor(theContext, [lineColor CGColor]); CGContextSetFillColorWithColor(theContext, [fillColor CGColor]); // according to Apple's documentation, DrawPath closes the path if it's a filled style, so a call to ClosePath isn't necessary CGContextDrawPath(theContext, drawingMode); }

  Read the article

• Is it possible to tell IIS 7 to process the request queue in parallel?

  - by Uwe Keim

  Currently we are developing an ASMX, ASP 2.0, IIS 7 web service that does some calculations (and return a dynamically generated document) and will take approx. 60 seconds to run. Since whe have a big machine with multiple cores and lots of RAM, I expected that IIS tries its best to route the requests that arrive in its requests queue to all available threads of the app pool's thread pool. But we experience quiet the opposite: When we issue requests to the ASMX web service URL from multiple different clients, the IIS seems to serially process these requests. I.e. request 1 arrives, is being processed, then request 2 is being processed, then request 3, etc. Question: Is it possible (without changing the C# code of the web service) to configure IIS to process requests in parallel, if enough threads are available? If yes: how should I do it? It no: any workarounds/tips? Thanks Uwe

  Read the article

• How to use Page Object pattern with Cucumber and Webrat / Selenium?

  - by Will Sargent

  I'm looking at a cucumber test suite that is somewhat brittle right now; many small steps, and no knowledge of the page itself. I'd like to factor out the logic involved in the step definitions inside a series of Selenium PageObjects. As seen here. However, because I'm using Webrat and not Selenium, everything has to go through the Webrat model. So I cannot do class MyPage < Selenium::WebPage end because that adds a direct dependency. So I have to route everything through Webrat while still maintaining the Selenium Page object goodness. No documentation on this that I can see: if someone has anything on Webrat + PageModel I'd love to see it.

  Read the article

• create manually parameter ReturnUrl

  - by user276640

  i have view like 'home/details/5', it can be access by anonymous user. but there is button, which can be pressed only by registered users. no problem, i can look into Request.IsAuthenticated , and if anonymous i show button login instead of secret button but the problem- when press login i can lose address and parameters of page. how can i create login button and pass a parameter ReturnUrl ? something like <%= Html.ActionLink("enter to buy", "LogOn", "Account", new { ReturnUrl = path to view with route value })%> i see only stupid solution <%= Html.ActionLink("enter to buy", "LogOn", "Account", new { ReturnUrl = "home/details/" + ViewContext.RouteData.Values["id"] })%> but i don't like to hard code names of controller

  Read the article

• Graph Algorithm To Find All Paths Between N Arbitrary Vertices

  - by russtbarnacle

  I have an graph with the following attributes: Undirected Not weighted Each vertex has a minimum of 2 and maximum of 6 edges connected to it. Vertex count will be < 100 I'm looking for paths between a random subset of the vertices (at least 2). The paths should simple paths that only go through any vertex once. My end goal is to have a set of routes so that you can start at one of the subset vertices and reach any of the other subset vertices. Its not necessary to pass through all the subset nodes when following a route. All of the algorithms I've found (Dijkstra,Depth first search etc.) seem to be dealing with paths between two vertices and shortest paths. Is there a known algorithm that will give me all the paths (I suppose these are subgraphs) that connect these subset of vertices?

  Read the article

• Can a program that controls IE detect if a HTTP 30x code is encountered?

  - by hillu

  I am trying to control an InternetExplorer.Application via the COM interface, using Perl, Win32::OLE, and information from MSDN. My goal is to get as good an idea as possible about what IE is doing. (Related to this question.) IE uses events to notify my program when it has finished various stages of processing a certain URL (NavigateComplete2, DownloadComplete DocumentComplete). It can also tell my program about various errors it encounters (NavigateError2). I consider that part of my problem solved well enough. I would also like to be able to reliably detect if IE is redirected by the server. Primarily, I'm concerned about HTTP 30x status codes. Is there a way to do this, either with COM automation or via another route?

  Read the article

• Rails: blank page - no errors or stack trace

  - by Nathan Long

  I've been trying to fix a bug in the Rails app I'm developing, and I keep getting a blank screen with no errors. I haven't found anything helpful in development.log, either (though it does show queries being run and such). Finally, I started to wonder if it's somehow set not to show errors anymore. I tried commenting out a necessary route, and sure enough, I got a blank page instead of the error and stack trace I expected. What might cause this? (I wondered if maybe I'm accidentally running production mode and errors aren't supposed to show then, but development.log is being appended, and if I open script/console and echo ENV['RAILS_ENV'], it says development.)

  Read the article

• Java Preprocessor in C#

  - by Olaseni

  Say I want to create a sort of Pre-processor for existing java code, so I can get the language specific keywords and objects, and then create routines that convert them to their Csharp equivalents, using Csharp code - what route should this take? I'm thinking of Regular Expressions, but I'm fuzzed. I have a bunch of about a 100 .java files and I need to convert them to csharp code in record time. I have manually done just about five of them and I have serious headaches already. Or are there any tools out there that already do that?

  Read the article

• ASP.NET MVC TDD with LINQ and SQL database

  - by dean nolan

  I am trying to start a new MVC project with tests and I thought the best way to go would have 2 databases. 1 for testing against and 1 for when I run the app and use it (also test really as it's not production yet). For the test database I was thinking of putting create table scripts and fill data scripts within the test setup method and then deleting all this in the tear down method. I am going to be using Linq to SQL though and I don't think that will allow me to do this? Will I have to just go the ADO route if I want to do it this way? Or should I just use a mock object and store data as an array or something?. Any tips on best practices? How did Jeff go about doing this for StackOveflow?

  Read the article

• Change Visual Studio Default Browser in an ASP.NET MVC project

  - by Kirschstein

  FireFox is set to my Windows default browser. I want to change the default browser used by Visual Studio for debugging. Normally the route I'd take to do this is right clicking on an .aspx file and setting the default from the Browse With... dialog. Unfortunately, ASP.NET MVC Views don't have the Browse With... option. What other ways can you set the default browser for ASP.NET MVC projects? Related, but NOT ASP.NET MVC Specific: Visual Studio opens default browser instead of IE

  Read the article

• A device specific alpha bitmap fails after switching resolutions in remote desktop

  - by Bob

  All my alpha bitmaps, created using CreateCompatibleBitmap(..), start to receive an error code 87 after someone signs in with Remote Desktop. I am assuming that this is because the resolution changed and I am using a device specific bitmap. I am wondering what the best route is to fix this issue without migrating to a device independent bitmap? Some options are: 1) Detect remote desktop change and flag all bitmaps to be reloaded (I have done this but it does not work as well as I would like). 2) Wait for error code 87 to happen on an alphablend image that previously worked, and then reload it (was going to try this next, im sure it will work, but a little hacky) 3) Detect random event such as WM_DISPLAYCHANGE or _ that tells me when I should do this (ie: a device change event I'm guessing, or maybe something more specific?) 4) _? Thanks for any help in advance

  Read the article

• Creating a new nested resource

  - by Bobby B

  I'm working on a basic garden logging application which consists of gardens, plants and planted plants. Each user has one or many gardens, plants are master definitions, and a planted plant can be thought of as an instance of a plant in a specific user's garden. In my routes.rb file I have the following: map.resources :gardens do |gardens| gardens.resources :planted_plants, :has_many => :plant_log_entries, :collection => { :filter => :post, :choose_garden => :post} gardens.resources :garden_log_entries end map.resources :plants This makes sense to me when retrieving a list of planted_plants in a user's garden, but I'd like to create a planted_plant record from the index of plant. The problem is, a user can have multiple gardens. How can I create a new form for a planted_plant that allows the user to specify which garden should be used? The current route requires a garden_id - which makes sense for retrieval, but I'd like to supply that as a parameter for creation. Thanks in advance for any help!

  Read the article

• Zend remove anchor text in url redirect

  - by user351785

  I have a form that is using an anchor name as it's action so that when the form is submitted it is it goes straight back to the form (for example 'www.domain.com/page#contact-form). The idea is if there are any errors then it'll go straight to the form (that's near the bottom of the page) so you can see the errors and continue filling in the form. If the form is valid, I want it to redirect to another page (for example www.domain.com/another-page). The problem is that the redirect url still has the anchor text in the url (in the above example it is www.domain.com/another-page#contact-form). I am using $this->_helper->redirector->goToRouteAndExit(array(), 'another-page', true); to goto the another-page route. I have tried setting the url specifically but that doesn't fix it either. How do I redirect to another page and remove that anchor text from the url?

  Read the article

• How do the routers communicate with each other ?

  - by Berkay

  Let's say that i want make a request a to a web page which is hosted in Europe (i live in USA).My packets only consist the IP address of the web page, first the domain name to ip address transformation is done, then my packets start their journey through to europe. i assume that MAC addresses never used in this situation? are they? First, my packets deal with many routers on way how these routers communicate with each other?, are router addresses added to my packet headers ? Second, is there a specific path router to router comminication or which conditions affect this route? Third to cross the Atlantic Ocean, are cables used or... ?

  Read the article

• routing problem in codeigniter

  - by Obay

  I'm new to CodeIgniter and routing. I have a Login controller whose index() loads up a view to enter a username/password. In the view, the form has action="login/authenticate". Login-authenticate() determines if the login is valid or not. If it's valid, redirect('lobby'), if not redirect('login') routes.php: $route['default_controller'] = "login" config.php: $config['base_url'] = "http://localhost/dts/"; $config['index_page'] = "index.php"; The problem is that when i go to http://localhost/dts/ , click login, I am correctly (?) redirected to http://localhost/dts/login/authenticate but the browser says Object not found!. But when I go to http://localhost/dts/index.php/ (with trailing slash), it works correctly (I get redirected to http://localhost/dts/index.php/login/authenticate, and am logged in) I tried removing "index.php" by using a .htaccess: RewriteEngine on RewriteCond $1 !^(index\.php|images|robots\.txt) RewriteRule ^(.*)$ /index.php/$1 [L] and it would no longer open even the http://localhost/dts/ I'm confused.. what's going on?

  Read the article

• Multiple Default Routes in ASP.NET MVC to different Default Actions

  - by Alex

  I have multiple controllers with different actions (no "Index" actions). The actions I consider "default" actions, are named differently. I want to create default routes for their names and have the first available action (from my list of default actions) executed if only the controller name is provided in the route. So, for example, I have the following actions which I want to consider default and want checked for their existence in a controller in this order: List() Draw() ViewSingle() The routing should somehow search for /{controller} and then take the first available action from the list above as default action, e.g.: /ControllerA -> ControllerA.List() /ControllerB -> ControllerB.Draw() /ControllerC -> ControllerC.ViewSingle() /ControllerD -> ControllerD.Draw() /ControllerE -> ControllerE.List() Is this possible? I tried creating additional Default actions like this but couldn't get it to work: routes.MapRoute("Default1", "{controller}/{action}", new { controller = UrlParameter.Optional, action = "List" } routes.MapRoute("Default2", "{controller}/{action}", new { controller = UrlParameter.Optional, action = "Draw" } routes.MapRoute("Default3", "{controller}/{action}", new { controller = UrlParameter.Optional, action = "ViewSingle" } Help?

  Read the article

• How to stop the Bottle webserver when started from subprocess

  - by luc

  Hello all, I would like to embed the great Bottle web framework into a small application (1st target is Windows OS). This app starts the bottle webserver thanks to the subprocess module. import subprocess p = subprocess.Popen('python websrv.py') The bottle app is quite simple @route("/") def index(): return template('index') run(reloader=True) It starts the default webserver into a Windows console. All seems Ok except the fact that I must press Ctrl-C to close the bottle webserver. I would like that the master app terminates the webserver when it shutdowns. I can't find a way to do that (p.terminate() doesn't work in this case unfortunately) Any idea? Thanks in advance

  Read the article

• Learning Ruby on Rails

  - by Ethan Gunderson

  As it stands now I'm a Java and C# developer, but the more and more I look at Ruby on Rails, the more I really want to learn it. What have you found to be the best route to learn RoR? Would it be easier to develop on Windows, or should I just run a virtual machine with linux? Is there an ide that can match the robustness of Visual Studio? Any programs to develop that give a good overhead of what to do? Any good books? Seriously, any tips/tricks/rants would be awesome.

  Read the article

• Rails "Load more..." instead of pagination.

  - by Joseph Silvashy

  I have a list of elements, and I've been using will_paginate up until now, but I'd like to have something like "load more..." at the bottom of the list. Is there an easy way to accomplish this using will_paginate or do I need to resort to some other method here? From what I know this is a better route anyhow because then I don't need a SQL count of the records. And it really doesn't matter if there are like 9,847 pages, nobody would need the records beyond the first couple pages anyhow.

  Read the article

• Disposing of Objects with long living dependencies

  - by Ray Booysen

  public class ABC { public ABC(IEventableInstance dependency) { dependency.ANewEvent += MyEventHandler; } private void MyEventHandler(object sender, EventArgs e) { //Do Stuff } } Let us say that an instance of ABC is a long living object and that my dependency is an even longer running object. When an instance of ABC needs to be cleaned up, I have two options. One I could have a Cleanup() method to unsubscribe from the ANewEvent event or I could implement IDisposable and in the Dispose unwire the event. Now I have no control over whether the consumer will call the dispose method or even the Cleanup method should I go that route. Should I implement a Finaliser and unsubscribe then? It feels dirty but I do not want hanging instances of ABC around. Thoughts?

  Read the article

• Why did mislav-will_paginate start adding so much garbage to urls between rails 2.3.2 and 2.3.5?

  - by user30997

  I've used will_paginate in a number of projects now, but when I moved one of them to Rails 2.3.5, clicking on any of the pagination links (page number, next, prev, etc.,) went from getting nice URLs like this: http://foo.com/user/1/date/2005_01_31/phone/555-6161 to this: http://foo.com/?options[]=user&options[]=date&options[]=2005_01_31&options[]=phone&options[]=555-6161 I have a route that looks like this that is probably the source of the 'options' keyword: map.connect '/browse/*options', :controller=>'assets', :action=>'browse' It's enough of an annoyance that I'm willing to roll a paginator to get around this if there isn't a way to get back to where I was before. Is there a way to get will_paginate to turn array-style routes into sane urls again? Thanks.

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >