Search Results

Search found 107955 results on 4319 pages for 'unknown google user'.

Page 88/4319 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • Cannot ping Google Public DNS on 8.8.8.8

    - by Tibor
    I have a weird problem on my Windows 7 (x64) computer. I seem to cannot ping the Google Public DNS on one of its addresses (while the other works fine). The peculiar thing is that it fails with the General failure. error message which usually means that there is a problem with a network adapter/base connectivity and not a timeout as one would expect. I checked my routing tables for any anomalies and I even flushed them but the problem seems unrelated. All the other hosts I tried ping fine (either respond or timeout). If I try to tracert or connect to the address via browser (yes, I know that it doesn't listen on port 80), it also fails instantaneously. The reason I need to ping 8.8.8.8 is that I commonly use it as a test of Internet conectivity due to it being rememberable. The problem occurs no matter where I connect to the Internet (it is a laptop computer). What could be the cause of this anomaly? Note: I use native IPv6 connectivity.

    Read the article

  • Make a socket as a user but make it readable and writable by another

    - by user1598585
    I have a software that is run under user A, this software creates a socket in /sockets and the socket should be readable and writable by user B. I have tried setting the directory to have ownership A:A or A:B but when user A creates the socket, it ends up with uid A and gid A. Using ACLs has not helped so far, the default mask is preventing the rights to be effective. rw permisions for B will always turn into jusr r. If what I make is not a socket it will work fine. How can I best accomplish this task? (It is for a web-server where the web-application makes the socket and the web-server software forwards requests to it)

    Read the article

  • Why is Google Chrome making these weird requests?

    - by mackenir
    I noticed that now and again, Chrome will make three requests to weird hostnames that arent resolved. For example: HEAD http://gtblynlsos/ HTTP/1.1 Host: gtblynlsos Proxy-Connection: keep-alive Content-Length: 0 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.13 (KHTML, like Gecko) Chrome/9.0.597.107 Safari/534.13 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-GB,en-US;q=0.8,en;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Other example weird hostnames: http://nxibbjklov/ http://moheksgryj/ Has anyone else seen this? Any ideas what's going on? I have all Chrome extensions disabled.

    Read the article

  • Google 2-step verification: Should my phone know my password? [closed]

    - by Sir Code-A-Lot
    Hi, Just enabled 2-step verification for my Google account. I have installed Google Authenticator on my Android phone, and I set up an application specific password for the Google account associated on my phone. This works great when just using installed apps like Gmail, Calendar and Google Reader. But if I want to access Google Docs, Google Tasks or any other website that requires a Google login, I don't seem to be able to use a application specific password. I have to use my real password and then use Google Authenticator to make a code for the next step. This means if my phone is stolen, revoking the password to my phone is pointless. The phone have already been verified, and all that is needed is my password, which the phones browser will have remembered. I realize that I can take measures to ensure the phones browser doesn't remember my password, but that's just not convenient at all. Am I missing something, or is there no elegant solution to this? Should I just let my phone know my real password? As I see it, being able to login with application specific passwords on websites (which apparently isn't possible) is the only way I can revoke my phones access in a meaningful way.

    Read the article

  • Make a socket as an user but make it readable and writable by another

    - by user1598585
    I have a software that is run under user A, this software creates a socket in /sockets and the socket should be readable and writable by user B. I have tried setting the directory to have ownership A:A or A:B but when user A creates the socket, it ends up with uid A and gid A. Using ACLs has not helped so far, the default mask is preventing the rights to be effective. rw permisions for B will always turn into jusr r. If what I make is not a socket it will work fine. How can I best accomplish this task? (It is for a web-server where the web-application makes the socket and the web-server software forwards requests to it)

    Read the article

  • Logging on to server creates duplicate user profiles in Documents & Setting

    - by Tech
    Windows Server 2003. I am having a problem with the creation of new user profiles when logging in remotely to a terminal server. The new user profile gets added under Documents & Settings as username.domainname. Deleting the new profile does not allow the original profile to be reverted to. Went logging on to the server again, it creates another new user profile. Nothing was changed in the Active Directory or security settings. How do I get the original profile to be used?

    Read the article

  • Does Google sometimes ignore "special" characters, possibly depending on your location or font type settings? [closed]

    - by RLH
    TLDR Google tends to ignore special characters in my search strings. Is there anything that I can do about it and is it, possibly, happening because Google makes certain assumptions based off of my default text-encoding settings and my location? I just posted this question over at StackOverflow. I had found a C preprocessor that I'd never seen before. As I should have done, I Googled it and tried to find out further information. I attempted various search terms which were all variations of "C Operator ##" (some times with and some times without the double-quotes.) Google didn't bring back anything of use so I posted my question on SO. As you can see from the comments, someone mentioned a search string (ironically one which I did try to search) and stated that I could have even hit the "I'm feeling lucky" button and have gotten my answer. The problem is I did search that, and the results that I received were far more basic and even after following the top results and searching the resulting pages, I could find nothing referencing the string "##". I'm not posting this question to complain but it does provide an empirical example of something I've seen before that really bugs me-- Google often ignores special characters in my search strings and the results are often useless. As a developer I often need to search for string values containing non-alphanumeric characters. Some characters (like the underscore or hyphen) can be used without trouble. However, other characters (such as the ampersand, carat, tilde and pound sign) are often ignored in my query strings. Is there a way to prevent this from happening so that I can get meaningful results from Google? NOTE I stay logged into Google and I live in the US. I wonder if Google detects some form of text-encoding setting or derives my results based off of certain, localized text-based assumptions. Regardless, I would like to for Google to search for what I give it. Is there anything that I can do to improve my results?

    Read the article

  • Windows domain login to temporary user

    - by amyassin
    We have a Windows domain with about 60 user accounts. Sometimes when a user logs in to his computer (already his account is created and has files there) windows logs him to a temporary user, displaying his name and everything, but without his files and data. This problem is rare and is solved simply by logging out and logging in. I noticed that it occurs at a close timings; they all happen at the same day if they did. My question is why does that happen? I want to trace the problem because it is so annoying when it happens, and I can't find a relative event that may be causing it: no server is down when it happens, no system maintenance or anything. We're running Windows Server 2003 R2 Standard, SP2 in the Domain Controller (and the same for the additional DC). The machines where this problem happened before are running Windows XP and Windows 7.

    Read the article

  • google book api

    - by ohana
    hi, i need to add google's book preview button in my web app. I tried Google Book Search APIs, and used their dynamic links, and added the following in my jquery code: var cburl = "http://books.google.com/books"; var api_url = cburl + "?jscmd=viewapi&bibkeys=" + "0321525566"; document.write(unescape("%3Cscript src=" + api_url + " type='text/javascript'%3E%3C/script%3E")); from firebug, i can see google responsed: var _GBSBookInfo = {"0321525566":{"bib_key":"0321525566","info_url":"http://books.google.com/books?id=VBRePgAACAAJ\u0026source=gbs_ViewAPI","preview_url":"http://books.google.com/books?id=VBRePgAACAAJ\u0026cd=1\u0026source=gbs_ViewAPI","thumbnail_url":"http://bks4.books.google.com/books?id=VBRePgAACAAJ\u0026printsec=frontcover\u0026img=1\u0026zoom=5\u0026sig=ACfU3U2i79GUit7BKFSvfvuZ1daX4EpZjg","preview":"noview","embeddable":false}}; however jquery complaint 'No _GBSBookInfo is defined'. then i tried jquery's ajax as blow instead of Document.write(): $.ajax({ url:api_url, success: function(_GBSBookInfo) { alert(_GBSBookInfo); alert('load was performed'); } }); still got the same complaint...anyone can help?

    Read the article

  • Need to upload files to google docs from my application and store reference to the uploaded file...

    - by Ali
    Hi guys - I'm working on a basic google applications based system. Like I earlier defined I'm building a simple ordering system and to each order placed I attach a file or document. I would like to be able to set it such that whatever file I upload is uploaded into google docs and I somehow am able to maintain a reference to that file from my own application i.e these files are concerned with such and such order. My application is google application based hopefully and I'm building it to be such for later on deployment into the cloud. How do I start on this and what do I need to do? Are there already working widgets I can use and apply or would I need to create my own customised solution for this? I'm working in Php MySQL.

    Read the article

  • Google suggest API does not work with Chinese locale

    - by SadSido
    Hi, everyone! I have a problem with Google suggest API when using Chinese locale. I am picking Chinese hieroglyphs at random and use the REST API to retrieve suggestions. Unfortunately, Google always return an empty list of suggestions (I am completely sure, that I convert my request in utf-8, and it is working fine with other languages, ex. Russian): Sample request: http://suggestqueries.google.com/complete/search?qu=%E9%80%9F Google answer: window.google.ac.h(["?",[]]) Does anyone know how to retrieve suggestions for Chinese locale? Maybe I am missing some flags or something? Maybe there is an official document from Google, saying that Chinese is not supported? And are there any people from China, using Google toolbar? Does it really work? I'd appreciate any help! If it matters, I am writing a simple WinAPI application, using C++...

    Read the article

  • Google Visualization API - Line and Scatter on one Chart.

    - by ealgestorm
    Does any one know if it is possible to use the Default Google Scatter Chart in the Google Visualizations Gallery to draw a scatter chart that has both a series with points only, a series with a line of best fit and on top of this a set of lines across the chart indicating limits. i.e. at +/- 20% etc. The chart we need is actually a Control Chart with multiple series and individual formatting of each series displayed on the chart. i.e some series with only points other series with a line of best fit. Does any one know of a Control Chart that has already been done using the Google Visualization API?

    Read the article

  • How to limit a google calendar xml / rss feed by date range (not working!!)

    - by Phil
    For the life of me I cannot get my google calendar xml feed to only display events within a certain date range. I know that start-min and start-max are supposed to limit the output (according to these posts: (links to posts deleted because I am a newbie and can only post one hyperlink argh) BUT I CAN'T GET IT TO WORK. It keeps showing lot of things outside the range. I created a sample calendar and made it public. It is some events the first week of april. Can anyone show me how to construct a request that only returns those three events from the first week in april? I'll GLADLY and GRATEFULLY paypal $10 to anyone who helps me break through on this. Here is the calendar's public feed: http://www.google.com/calendar/feeds/66m31c36sj9u5k8kekrvt2lpr8%40group.calendar.google.com/public/basic

    Read the article

  • google data api for youtube

    - by user93796
    i am trying to run the sample program which comes with google data api.I am geting a run time error at following line YouTubeService myService = new YouTubeService("gdataSample-YouTube-1"); erroe is as follows : run: Exception in thread "main" java.lang.NoClassDefFoundError: com/google/common/collect/Maps at com.google.gdata.wireformats.AltRegistry.(AltRegistry.java:118) at com.google.gdata.wireformats.AltRegistry.(AltRegistry.java:100) at com.google.gdata.client.Service.(Service.java:532) at YouTubeReadonlyClient.main(YouTubeReadonlyClient.java:713) Caused by: java.lang.ClassNotFoundException: com.google.common.collect.Maps at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:252) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) ... 4 more Java Result: 1 BUILD SUCCESSFUL (total time: 0 seconds) I tried both google data api 1.35.0 and 1.35.1 versions and i am geting the same error in both

    Read the article

  • How to get unique URL identifier after inserting item in Google Base with Zend Gdata API?

    - by msumme
    I need to get the unique URL identifier for the product that is created after inserting an item into Google Base using the Zend_Gdata_Gbase library. I can't seem to do this. I am finding a startling lack of documentation online about manipulating the objects used in these applications. The url that I add to the object does not work to retrieve the base item later, which is why I need to get the one that google generates upon submission. I am writing a program that will need to be able to delete content at a later date, and thus will need to store that information in order to keep the website synced with the Google Base feed. Thanks in advance for any help.

    Read the article

  • SQL SERVER – Importance of User Without Login

    - by pinaldave
    Some questions are very open ended and it is very hard to come up with exact requirements. Here is one question I was asked in recent User Group Meeting. Question: “In recent version of SQL Server we can create user without login. What is the use of it?” Great question indeed. Let me first attempt to answer this question but after reading my answer I need your help. I want you to help him as well with adding more value to it. Answer: Let us visualize a scenario. An application has lots of different operations and many of them are very sensitive operations. The common practice was to do give application specific role which has more permissions and access level. When a regular user login (not system admin), he/she might have very restrictive permissions. The application itself had a user name and password which means applications can directly login into the database and perform the operation. Developers were well aware of the username and password as it was embedded in the application. When developer leaves the organization or when the password was changed, the part of the application had to be changed where the same username and passwords were used. Additionally, developers were able to use the same username and password and login directly to the same application. In earlier version of SQL Server there were application roles. The same is later on replaced by “User without Login”. Now let us recreate the above scenario using this new “User without Login”. In this case, User will have to login using their own credentials into SQL Server. This means that the user who is logged in will have his/her own username and password. Once the login is done in SQL Server, the user will be able to use the application. Now the database should have another User without Login which has all the necessary permissions and rights to execute various operations. Now, Application will be able to execute the script by impersonating “user without login – with more permissions”. Here there is assumed that user login does not have enough permissions and another user (without login) there are more rights. If a user knows how the application is using the database and their various operations, he can switch the context to user without login making him enable for doing further modification. Make sure to explicitly DENY view definition permission on the database. This will make things further difficult for user as he will have to know exact details to get additional permissions. If a user is System Admin all the details which I just mentioned in above three paragraphs does not apply as admin always have access to everything. Additionally, the method describes above is just one of the architecture and if someone is attempting to damage the system, they will still be able to figure out a workaround. You will have to put further auditing and policy based management to prevent such incidents and accidents. I guess this is my answer. I read it multiple times but I still feel that I am missing something. There should be more to this concept than what I have just described. I have merely described one scenario but there will be many more scenarios where this situation will be useful. Now is your turn to help – please leave a comment with the additional suggestion where exactly “User without Login” will be useful as well did I miss anything when I described above scenario. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Google Chrome warning that Javascript is disabled

    - by kirchoffs415
    I hope somebody can help. I keep getting the following message when I log on: Your Javascript is disabled. Limited functionality is available. It will stay for maybe a day sometimes two. I have uninstalled javascript and reinstalled but still the same. I am using chrome. Any help would be grateful many thanks Dominic My system spec is as follows System InformationOS Name Microsoft® Windows Vista™ Home Premium Version 6.0.6002 Service Pack 2 Build 6002 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DOM-PC System Manufacturer Dell Inc. System Model Inspiron 1545 System Type X86-based PC Processor Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Dell Inc. A05, 25/02/2009 SMBIOS Version 2.4 Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume3 Locale United Kingdom Hardware Abstraction Layer Version = "6.0.6002.18005" User Name DOM-PC\DOM Time Zone GMT Standard Time Installed Physical Memory (RAM) 3.00 GB Total Physical Memory 2.96 GB Available Physical Memory 1.38 GB Total Virtual Memory 5.89 GB Available Virtual Memory 4.25 GB Page File Space 3.00 GB Page File C:\pagefile.sys My System Specs

    Read the article

  • My google map android app keeps crashing

    - by Manny264
    I have followed about two tutorials from vogella and some other tutorial that looked similar...very similar but to no avail. I load the app on my nexus 7 and it just crashes "Unfortunately MyMapView has stopped working" on launch.This is the manifest: ` <uses-sdk android:minSdkVersion="17" android:targetSdkVersion="17" /> <uses-feature android:glEsVersion="0x00020000" android:required="true"/> <uses-permission android:name="android.permission.INTERNET" /> <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" /> <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" /> <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" /> <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/> <uses-permission android:name="com.google.android.providers.gsf.permission.READ_GSERVICES"/> <application android:allowBackup="true" android:icon="@drawable/ic_launcher" android:label="@string/app_name" android:theme="@style/AppTheme" > <uses-library android:name="com.google.android.maps" /> <activity android:name="com.macmozart.mymapview.MainActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <meta-data android:name="com.google.android.maps.v2.API_KEY" android:value="AIzaSyBZ1Bt7rjB863Jy-B05zls6k8XZsBGQ6-4" /> </application> ` Followed by my main layout: <fragment android:id="@+id/map" android:layout_width="match_parent" android:layout_height="match_parent" class="com.google.android.gms.maps.MapFragment" /> and finally my java class: package com.macmozart.mymapview; import android.app.Activity; import android.os.Bundle; import com.google.android.gms.maps.CameraUpdateFactory; import com.google.android.gms.maps.GoogleMap; import com.google.android.gms.maps.MapFragment; import com.google.android.gms.maps.model.BitmapDescriptorFactory; import com.google.android.gms.maps.model.LatLng; import com.google.android.gms.maps.model.Marker; import com.google.android.gms.maps.model.MarkerOptions; import com.google.android.maps.*; public class MainActivity extends Activity { static final LatLng HAMBURG = new LatLng(53.558, 9.927); static final LatLng KIEL = new LatLng(53.551, 9.993); private GoogleMap map; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); map = ((MapFragment) getFragmentManager().findFragmentById(R.id.map)) .getMap(); if (map != null) { Marker hamburg = map.addMarker(new MarkerOptions() .position(HAMBURG).title("Hamburg")); Marker kiel = map.addMarker(new MarkerOptions() .position(KIEL) .title("Kiel") .snippet("Kiel is cool") .icon(BitmapDescriptorFactory .fromResource(R.drawable.ic_launcher))); map.moveCamera(CameraUpdateFactory.newLatLngZoom(HAMBURG, 15)); // Zoom in, animating the camera. map.animateCamera(CameraUpdateFactory.zoomTo(10), 2000, null); } } } Any idea what im doing wrong I really need this to work

    Read the article

  • Delaying execution of Javascript function relative to Google Maps / geoxml3 parser?

    - by Terra Fimeira
    I'm working on a implementing a Google map on a website with our own tiles overlays and KML elements. I've been previously requested to create code so that, for instance, when the page is loaded from a specific URL, it would initialize with one of the tile overlays already enabled. Recently, I've been requested to do the same for the buildings which are outlined by KML elements so that, arriving at the page with a specific URL, it would automatically zoom, center, and display information on the building. However, while starting with the tile overlays work, the building KML does not. After doing some testing, I've determined that when the code which checks the URL executes, the page is still loading the KML elements and thus do not exist for the code to compare to or use: Code for evaluating URL (placed at the end of onLoad="initialize()") function urlClick() { var currentURL = window.location.href; //Retrieve page URL var URLpiece = currentURL.slice(-6); //pull the last 6 digits (for testing) if (URLpiece === "access") { //If the resulting string is "access": access_click(); //Display accessibility overlay } else if (URLpiece === "middle") { //Else if the string is "middle": facetClick('Middle College'); //Click on building "Middle College" }; }; facetClick(); function facetClick(name) { //Convert building name to building ID. for (var i = 0; i < active.placemarks.length; i++) { if (active.placemarks[i].name === name) { sideClick(i) //Click building whose id matches "Middle College" }; }; }; Firebug Console Error active is null for (var i = 0; i < active.placemarks.length; i++) { active.placemarks is which KML elements are loaded on the page, and being null, means no KML has been loaded yet. In short, I have a mistiming and I can't seem to find a suitable place to place the URL code to execute after the KMl has loaded. As noted above, I placed it at the end of onLoad="initialize()", but it would appear that, instead of waiting for the KML to completely load earlier in the function, the remainder of the function is executed: onLoad="initialize()" information(); //Use the buttons variables inital state to set up description buttons(); //and button state button_hover(0); //and button description to neutral. //Create and arrange the Google Map. //Create basic tile overlays. //Set up parser to work with KML elements. myParser = new geoXML3.parser({ //Parser: Takes KML and converts to JS. map: map, //Applies parsed KML to the map singleInfoWindow: true, afterParse: useTheData //Allows us to use the parsed KML in a function }); myParser.parse(['/maps/kml/shapes.kml','/maps/kml/shapes_hidden.kml']); google.maps.event.addListener(map, 'maptypeid_changed', function() { autoOverlay(); }); //Create other tile overlays to appear over KML elements. urlClick(); I suspect one my issues lies in using the geoxml3 parser (http://code.google.com/p/geoxml3/) which converts our KML files to Javascript. While the page has completed loading all of the elements, the map on the page is still loading, including the KML elements. I have also tried placing urlClick() in the parser itself in various places which appear to execute after all the shapes have been parsed, but I've had no success there either. While I've been intending to strip out the parser, I would like to know if there is any way of executing the "urlClick" after the parser has returned the KML shapes. Ideally, I don't want to use an arbitrary means of defining a time to wait, such as "wait 3 seconds, and go", as my various browsers all load the page at different times; rather, I'm looking for some way to say "when the parser is done, execute" or "when the Google map is completely loaded, execute" or perhaps even "hold until the parser is complete before advancing to urlClick".

    Read the article

  • Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block 0,0

    - by AlbertK
    I've read the following two solution: Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) kernel panic not syncing vfs unable to mount root fs on unknown block oo swapper not tainted ,but still got the same problem. Here's my full error code: [1.902269] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [1.902299] Pid: 1, comm: swapper/0 Not tainted 3.2.0-29-generic #46-Ubuntu [1.902325] Call Trace: [1.902348] [<ffffffff81640ec8>] panic+0x91/0x1a4 [1.902373] [<ffffffff81cfc01e>] mount_block_root+0xdc/0x18e [1.902400] [<ffffffff81002930>] ? populate_rootfs_wait+0x300/0x9d0 [1.902426] [<ffffffff81cfc257>] mount_root+0x54/0x59 [1.902450] [<ffffffff81cfc3c9>] prepare_namespace+0x16d/0x1a6 [1.902476] [<ffffffff81cfbd63>] kernel_init+0x153/0x158 [1.902501] [<ffffffff81664034>] kernel_thread_helper+0x4/0x10 [1.902527] [<ffffffff81cfbc10>] ? start_kernel+0x3bd/0x3bd [1.902551] [<ffffffff81664030>] ? gs_change+0x13/0x13 I don't know what these error messages mean at all, but I hope that these will help to solve this problem I'm running Ubuntu 12.04. Thanks for any advice.

    Read the article

  • Searching for Windows User SID's in C#

    - by Ubiquitous Che
    Context Context first - issues I'm trying to resolve are below. One of our clients has asked as to quote how long it would take for us to improve one of our applications. This application currently provides basic user authentication in the form of username/password combinations. This client would like the ability for their employees to log-in using the details of whatever Windows User account is currently logged in at the time of running the application. It's not a deal-breaker if I tell them know - but the client might be willing to pay the costs of development to add this feature to the application. It's worth looking into. Based on my hunting around, it seems like storing the user login details against Domain\Username will be problematic if those details are changed. But Windows User SID's aren't supposed to change at all. I've got the impression that it would be best to record Windows Users by SID - feel free to relieve me of that if I'm wrong. I've been having a fiddle with some Windows API calls. From within C#, grabbing the current user's SID is easy enough. I can already take any user's SID and process it using LookupAccountSid to get username and domain for display purposes. For the interested, my code for this is at the end of this post. That's just the tip of the iceberg, however. The two issues below are completely outside my experience. Not only do I not know how to implement them - I don't even known how to find out how to implement them, or what the pitfalls are on various systems. Any help getting myself aimed in the right direction would be very much appreciated. Issue 1) Getting hold of the local user at runtime is meaningless if that user hasn't been granted access to the application. We will need to add a new section to our application's 'administrator console' for adding Windows Users (or groups) and assigning within-app permissions against those users. Something like an 'Add Windows User Login' button that will raise a pop-up window that will allow the user to search for available Windows User accounts on the network (not just the local machine) to be added to the list of available application logins. If there's already a component in .NET or Windows that I can shanghai into doing this for me, it would make me a very happy man. Issue 2) I also want to know how to take a given Windows User SID and check it against a given Windows User Group (probably taken from a database). I'm not sure how to get started with this one either, though I expect it to be easier than the issue above. For the Interested [STAThread] static void Main(string[] args) { MessageBox.Show(WindowsUserManager.GetAccountNameFromSID(WindowsIdentity.GetCurrent().User.Value)); MessageBox.Show(WindowsUserManager.GetAccountNameFromSID("S-1-5-21-57989841-842925246-1957994488-1003")); } public static class WindowsUserManager { public static string GetAccountNameFromSID(string SID) { try { StringBuilder name = new StringBuilder(); uint cchName = (uint)name.Capacity; StringBuilder referencedDomainName = new StringBuilder(); uint cchReferencedDomainName = (uint)referencedDomainName.Capacity; WindowsUserManager.SID_NAME_USE sidUse; int err = (int)ESystemError.ERROR_SUCCESS; if (!WindowsUserManager.LookupAccountSid(null, SID, name, ref cchName, referencedDomainName, ref cchReferencedDomainName, out sidUse)) { err = Marshal.GetLastWin32Error(); if (err == (int)ESystemError.ERROR_INSUFFICIENT_BUFFER) { name.EnsureCapacity((int)cchName); referencedDomainName.EnsureCapacity((int)cchReferencedDomainName); err = WindowsUserManager.LookupAccountSid(null, SID, name, ref cchName, referencedDomainName, ref cchReferencedDomainName, out sidUse) ? (int)ESystemError.ERROR_SUCCESS : Marshal.GetLastWin32Error(); } } if (err != (int)ESystemError.ERROR_SUCCESS) throw new ApplicationException(String.Format("Could not retrieve acount name from SID. {0}", SystemExceptionManager.GetDescription(err))); return String.Format(@"{0}\{1}", referencedDomainName.ToString(), name.ToString()); } catch (Exception ex) { if (ex is ApplicationException) throw ex; throw new ApplicationException("Could not retrieve acount name from SID", ex); } } private enum SID_NAME_USE { SidTypeUser = 1, SidTypeGroup, SidTypeDomain, SidTypeAlias, SidTypeWellKnownGroup, SidTypeDeletedAccount, SidTypeInvalid, SidTypeUnknown, SidTypeComputer } [DllImport("advapi32.dll", EntryPoint = "GetLengthSid", CharSet = CharSet.Auto)] private static extern int GetLengthSid(IntPtr pSID); [DllImport("advapi32.dll", SetLastError = true)] private static extern bool ConvertStringSidToSid( string StringSid, out IntPtr ptrSid); [DllImport("advapi32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern bool LookupAccountSid( string lpSystemName, [MarshalAs(UnmanagedType.LPArray)] byte[] Sid, StringBuilder lpName, ref uint cchName, StringBuilder ReferencedDomainName, ref uint cchReferencedDomainName, out SID_NAME_USE peUse); private static bool LookupAccountSid( string lpSystemName, string stringSid, StringBuilder lpName, ref uint cchName, StringBuilder ReferencedDomainName, ref uint cchReferencedDomainName, out SID_NAME_USE peUse) { byte[] SID = null; IntPtr SID_ptr = IntPtr.Zero; try { WindowsUserManager.ConvertStringSidToSid(stringSid, out SID_ptr); int err = SID_ptr == IntPtr.Zero ? Marshal.GetLastWin32Error() : (int)ESystemError.ERROR_SUCCESS; if (SID_ptr == IntPtr.Zero || err != (int)ESystemError.ERROR_SUCCESS) throw new ApplicationException(String.Format("'{0}' could not be converted to a SID byte array. {1}", stringSid, SystemExceptionManager.GetDescription(err))); int size = (int)GetLengthSid(SID_ptr); SID = new byte[size]; Marshal.Copy(SID_ptr, SID, 0, size); } catch (Exception ex) { if (ex is ApplicationException) throw ex; throw new ApplicationException(String.Format("'{0}' could not be converted to a SID byte array. {1}.", stringSid, ex.Message), ex); } finally { // Always want to release the SID_ptr (if it exists) to avoid memory leaks. if (SID_ptr != IntPtr.Zero) Marshal.FreeHGlobal(SID_ptr); } return WindowsUserManager.LookupAccountSid(lpSystemName, SID, lpName, ref cchName, ReferencedDomainName, ref cchReferencedDomainName, out peUse); } }

    Read the article

  • Process: Unable to start service com.google.android.gms.checkin.CheckinService with Intent

    - by AndyRoid
    I'm trying to build a Google map application but keep receiving this in my LogCat. I have all the permissions and meta-data set in my manifest, but am still dumbfounded by this error. Have looked everywhere on SO for this specific error but found nothing relating to com.google.android.gms.checkin A little bit about my structural hierarchy. MainActivity extends ActionBarActivity with three tabs underneath actionbar. Each tab has it's own fragment. On the gMapFragment I create a GPSTrack object from my GPSTrack class which extends Service and implements LocationListener. The problem is that when I start the application I get this message: I have all my libraries imported properly and I even added the google-play-services.jar into my libs folder. I also installed Google Play Services APKs through CMD onto my emulator. Furthermore the LocationManager lm = = (LocationManager) mContext.getSystemService(LOCATION_SERVICE); in my GPSTrack class always returns null. Why is this and how can I fix these issues? Would appreciate an explanation along with solution too, I want to understand what's going on here. ============== Code: gMapFragment.java public class gMapFragment extends SupportMapFragment { private final String TAG = "gMapFragment"; private GoogleMap mMap; protected SupportMapFragment mapFrag; private Context mContext = getActivity(); private static View view; @Override public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) { if (view != null) { ViewGroup parent = (ViewGroup) view.getParent(); if (parent != null) { parent.removeView(view); } } try { super.onCreateView(inflater, container, savedInstanceState); view = inflater.inflate(R.layout.fragment_map, container, false); setupGoogleMap(); } catch (Exception e) { /* * Map already there , just return as view */ } return view; } private void setupGoogleMap() { mapFrag = (SupportMapFragment) getFragmentManager().findFragmentById( R.id.mapView); if (mapFrag == null) { FragmentManager fragManager = getFragmentManager(); FragmentTransaction fragTransaction = fragManager .beginTransaction(); mapFrag = SupportMapFragment.newInstance(); fragTransaction.replace(R.id.mapView, mapFrag).commit(); } if (mapFrag != null) { mMap = mapFrag.getMap(); if (mMap != null) { setupMap(); mMap.setOnMapClickListener(new OnMapClickListener() { @Override public void onMapClick(LatLng point) { // TODO your click stuff on map } }); } } } @Override public void onAttach(Activity activity) { super.onAttach(activity); Log.d("Attach", "on attach"); } @Override public void onDetach() { super.onDetach(); } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); } @Override public void onResume() { super.onResume(); } @Override public void onPause() { super.onPause(); } @Override public void onDestroy() { super.onDestroy(); } private void setupMap() { GPSTrack gps = new GPSTrack(mContext); // Enable MyLocation layer of google map mMap.setMyLocationEnabled(true); Log.d(TAG, "MyLocation enabled"); // Set Map type mMap.setMapType(GoogleMap.MAP_TYPE_NORMAL); // Grab current location **ERROR HERE/Returns Null** Location location = gps.getLocation(); Log.d(TAG, "Grabbing location..."); if (location != null) { Log.d(TAG, "location != null"); // Grab Latitude and Longitude double latitude = location.getLatitude(); double longitude = location.getLongitude(); Log.d(TAG, "Getting lat, long.."); // Initialize LatLng object LatLng latLng = new LatLng(latitude, longitude); Log.d(TAG, "LatLng initialized"); // Show current location on google map mMap.moveCamera(CameraUpdateFactory.newLatLng(latLng)); // Zoom in on google map mMap.animateCamera(CameraUpdateFactory.zoomTo(20)); mMap.addMarker(new MarkerOptions().position( new LatLng(latitude, longitude)).title("You are here.")); } else { gps.showSettingsAlert(); } } } GPSTrack.java public class GPSTrack extends Service implements LocationListener{ private final Context mContext; private boolean isGPSEnabled = false; //See if network is connected to internet private boolean isNetworkEnabled = false; //See if you can grab the location private boolean canGetLocation = false; protected Location location = null; protected double latitude; protected double longitude; private static final long MINIMUM_DISTANCE_CHANGE_FOR_UPDATES = 10; //10 Meters private static final long MINIMUM_TIME_CHANGE_FOR_UPDATES = 1000 * 60 * 1; //1 minute protected LocationManager locationManager; public GPSTrack(Context context) { this.mContext = context; getLocation(); } public Location getLocation() { try { //Setup locationManager for controlling location services **ERROR HERE/Return Null** locationManager = (LocationManager) mContext.getSystemService(LOCATION_SERVICE); //See if GPS is enabled isGPSEnabled = locationManager.isProviderEnabled(LocationManager.GPS_PROVIDER); //See if Network is connected to the internet or carrier service isNetworkEnabled = locationManager.isProviderEnabled(LocationManager.NETWORK_PROVIDER); if (!isGPSEnabled && !isNetworkEnabled) { Toast.makeText(getApplicationContext(), "No Network Provider Available", Toast.LENGTH_SHORT).show(); } else { this.canGetLocation = true; if (isNetworkEnabled) { locationManager.requestLocationUpdates( LocationManager.NETWORK_PROVIDER, MINIMUM_TIME_CHANGE_FOR_UPDATES, MINIMUM_DISTANCE_CHANGE_FOR_UPDATES, this); Log.d("GPS", "GPS Enabled"); if (locationManager != null) { location = locationManager.getLastKnownLocation(LocationManager.GPS_PROVIDER); if (location != null) { latitude = location.getLatitude(); longitude = location.getLongitude(); } } } } } catch (Exception e) { e.printStackTrace(); } return location; } public void stopUsingGPS() { if (locationManager != null) { locationManager.removeUpdates(GPSTrack.this); } } public double getLatitude() { if (location != null) { latitude = location.getLatitude(); } return latitude; } public double getLongitude() { if (location != null) { longitude = location.getLongitude(); } return longitude; } public boolean canGetLocation() { return this.canGetLocation; } public void showSettingsAlert() { AlertDialog.Builder alertDialog = new AlertDialog.Builder(mContext); //AlertDialog title alertDialog.setTitle("GPS Settings"); //AlertDialog message alertDialog.setMessage("GPS is not enabled. Do you want to go to Settings?"); alertDialog.setPositiveButton("Settings", new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { // TODO Auto-generated method stub Intent i = new Intent(Settings.ACTION_LOCATION_SOURCE_SETTINGS); mContext.startActivity(i); } }); alertDialog.setNegativeButton("Cancel", new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { // TODO Auto-generated method stub dialog.cancel(); } }); alertDialog.show(); } @Override public void onLocationChanged(Location location) { // TODO Auto-generated method stub } @Override public void onStatusChanged(String provider, int status, Bundle extras) { // TODO Auto-generated method stub } @Override public void onProviderEnabled(String provider) { // TODO Auto-generated method stub } @Override public void onProviderDisabled(String provider) { // TODO Auto-generated method stub } @Override public IBinder onBind(Intent intent) { // TODO Auto-generated method stub return null; } } logcat 06-08 22:35:03.441: E/AndroidRuntime(1370): FATAL EXCEPTION: main 06-08 22:35:03.441: E/AndroidRuntime(1370): Process: com.google.android.gms, PID: 1370 06-08 22:35:03.441: E/AndroidRuntime(1370): java.lang.RuntimeException: Unable to start service com.google.android.gms.checkin.CheckinService@b1094e48 with Intent { cmp=com.google.android.gms/.checkin.CheckinService }: java.lang.SecurityException: attempting to read gservices without permission: Neither user 10053 nor current process has com.google.android.providers.gsf.permission.READ_GSERVICES. 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ActivityThread.handleServiceArgs(ActivityThread.java:2719) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ActivityThread.access$2100(ActivityThread.java:135) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1293) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.os.Handler.dispatchMessage(Handler.java:102) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.os.Looper.loop(Looper.java:136) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ActivityThread.main(ActivityThread.java:5017) 06-08 22:35:03.441: E/AndroidRuntime(1370): at java.lang.reflect.Method.invokeNative(Native Method) 06-08 22:35:03.441: E/AndroidRuntime(1370): at java.lang.reflect.Method.invoke(Method.java:515) 06-08 22:35:03.441: E/AndroidRuntime(1370): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:779) 06-08 22:35:03.441: E/AndroidRuntime(1370): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:595) 06-08 22:35:03.441: E/AndroidRuntime(1370): at dalvik.system.NativeStart.main(Native Method) 06-08 22:35:03.441: E/AndroidRuntime(1370): Caused by: java.lang.SecurityException: attempting to read gservices without permission: Neither user 10053 nor current process has com.google.android.providers.gsf.permission.READ_GSERVICES. 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ContextImpl.enforce(ContextImpl.java:1685) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ContextImpl.enforceCallingOrSelfPermission(ContextImpl.java:1714) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.content.ContextWrapper.enforceCallingOrSelfPermission(ContextWrapper.java:572) 06-08 22:35:03.441: E/AndroidRuntime(1370): at imq.c(SourceFile:107) 06-08 22:35:03.441: E/AndroidRuntime(1370): at imq.a(SourceFile:121) 06-08 22:35:03.441: E/AndroidRuntime(1370): at imq.a(SourceFile:227) 06-08 22:35:03.441: E/AndroidRuntime(1370): at bwq.c(SourceFile:166) 06-08 22:35:03.441: E/AndroidRuntime(1370): at com.google.android.gms.checkin.CheckinService.a(SourceFile:237) 06-08 22:35:03.441: E/AndroidRuntime(1370): at com.google.android.gms.checkin.CheckinService.onStartCommand(SourceFile:211) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ActivityThread.handleServiceArgs(ActivityThread.java:2702) AndroidManifest <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.app" android:versionCode="1" android:versionName="1.0" > <uses-sdk android:minSdkVersion="14" android:targetSdkVersion="19" /> <uses-permission android:name="com.curio.permission.MAPS_RECEIVE" /> <uses-permission android:name="android.permission.CAMERA" /> <uses-permission android:name="android.permission.INTERNET" /> <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" /> <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" /> <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" /> <uses-permission android:name="android.permission.ACCESS_WIFI_STATE" /> <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" /> <uses-permission android:name="com.google.android.providers.gsf.permission.READ_GSERVICES" /> <uses-permission android:name="android.permission.ACCESS_MOCK_LOCATION" /> <uses-feature android:name="android.hardware.camera" android:required="true" /> <uses-feature android:glEsVersion="0x00020000" android:required="true" /> <application android:allowBackup="true" android:icon="@drawable/ic_launcher" android:label="@string/app_name" android:theme="@style/AppTheme" > <activity android:name="com.app.MainActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <meta-data android:name="com.google.android.gms.version" android:value="@integer/google_play_services_version" /> <meta-data android:name="com.google.android.maps.v2.API_KEY" android:value="AI........................" /> </application>

    Read the article

  • Rails User-Profile model challenges

    - by Craig
    I am attempting to create an enrollment process similar to SO's: route to an OpenID provider provider returns the user's information to the UsersController (a guess) UsersController creates user, then routes to the ProfilesController's new or edit action. For now, I'm simply trying to create the user, then route to the ProfilesController's new or edit action (not sure which I should be using). Here's what I have thus far: Models: class User < ActiveRecord::Base has_one :profile end class Profile < ActiveRecord::Base belongs_to :user end Routes: map.resources :users do |user| user.resource :profile end new_user_profile GET /users/:user_id/profile/new(.:format) {:controller=>"profiles", :action=>"new"} edit_user_profile GET /users/:user_id/profile/edit(.:format) {:controller=>"profiles", :action=>"edit"} user_profile GET /users/:user_id/profile(.:format) {:controller=>"profiles", :action=>"show"} PUT /users/:user_id/profile(.:format) {:controller=>"profiles", :action=>"update"} DELETE /users/:user_id/profile(.:format) {:controller=>"profiles", :action=>"destroy"} POST /users/:user_id/profile(.:format) {:controller=>"profiles", :action=>"create"} users GET /users(.:format) {:controller=>"users", :action=>"index"} POST /users(.:format) {:controller=>"users", :action=>"create"} new_user GET /users/new(.:format) {:controller=>"users", :action=>"new"} edit_user GET /users/:id/edit(.:format) {:controller=>"users", :action=>"edit"} user GET /users/:id(.:format) {:controller=>"users", :action=>"show"} PUT /users/:id(.:format) {:controller=>"users", :action=>"update"} DELETE /users/:id(.:format) {:controller=>"users", :action=>"destroy"} Controllers: class UsersController < ApplicationController # generate new-user form def new @user = User.new end # process new-user-form post def create @user = User.new(params[:user]) if @user.save redirect_to new_user_profile_path(@user) ... end end # generate edit-user form def edit @user = User.find(params[:id]) end # process edit-user-form post def update @user = User.find(params[:id]) respond_to do |format| if @user.update_attributes(params[:user]) flash[:notice] = 'User was successfully updated.' format.html { redirect_to(users_path) } format.xml { head :ok } ... end end end class ProfilesController < ApplicationController before_filter :get_user def get_user @user = User.find(params[:user_id]) end # generate new-profile form def new @user.profile = Profile.new @profile = @user.profile end # process new-profile-form post def create @user.profile = Profile.new(params[:profile]) @profile = @user.profile respond_to do |format| if @profile.save flash[:notice] = 'Profile was successfully created.' format.html { redirect_to(@profile) } format.xml { render :xml => @profile, :status => :created, :location => @profile } ... end end end # generate edit-profile form def edit @profile = @user.profile end # generate edit-profile-form post def update @profile = @user.profile respond_to do |format| if @profile.update_attributes(params[:profile]) flash[:notice] = 'Profile was successfully updated.' # format.html { redirect_to(@profile) } format.html { redirect_to(user_profile(@user)) } format.xml { head :ok } else format.html { render :action => "edit" } format.xml { render :xml => @profile.errors, :status => :unprocessable_entity } end end end Edit-User View: ... <% form_for(@user) do |f| %> ... New-Profile View: ... <% form_for([@user,@profile]) do |f| %> .. I'm having two problems: When saving an edit to the User model, the UsersController attempts to route to http://localhost:3000/users/1/profile.%23%3Cprofile:0x10438e3e8%3E, instead of http://localhost:3000/users/1/profile When the new-profile form is being rendered, it throws an error that reads: undefined method `user_profiles_path' for # Is it better to create a blank profile when the user is created (in the UsersController), then edit it OR follow the rest-ful convention of creating the profile in the ProfilesController (as I have done)? What am I missing? I did review Associating Two Models in Rails (user and profile), but it didn't address my needs. Thanks for your time.

    Read the article

  • Interpretation of empty User-agent

    - by Amit Agrawal
    How should I interpret a empty User-agent? I have some custom analytics code and that code has to analyze only human traffic. I have got a working list of User-agents denoting human traffic, and bot traffic, but the empty User-agent is proving to be problematic. And I am getting lots of traffic with empty user agent - 10%. Additionally - I have crafted the human traffic versus bot traffic user agent list by analyzing my current logs. As such I might be missing a lot of entries in there. Is there a well maintained list of user agents denoting bot traffic, OR the inverse a list of user agents denoting human traffic?

    Read the article

  • Give access to specific services on Windows 7 Professional machines?

    - by Chad Cook
    We have some machines running Windows 7 Professional at our office. The typical user needs to have access to stop and start a service for a local program they run. These machines have a local web server and database installed and we need to restrict access to certain folders and services related to the web server and database for these users. The setup I have tried so far is to add the typical user as a Power User. I have been able to successfully restrict them from accessing certain folders (as far as I can tell) but now they do not have access to the service needed for starting and stopping the local program. My thought was to give them access to the specific service but I have not had any luck yet. In searching the web for solutions the only results I have found relate to Windows Server 2000 and 2003 and involve creating security templates and databases through the Microsoft Management Console. I am hesitant to try an approach like this as these articles are typically older and I worry this method is outdated. Is there a better way to accomplish the end goal of giving the user permission to run the service and restrict their access to certain folders? If any clarification is needed on the setup or what we are trying to achieve, please let me know. Thanks in advance.

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >